Cree XLamp MC-E LED TABLE OF CONTENTS PRODUCT DESCRIPTION FEATURES CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET

Size: px
Start display at page:

Download "Cree XLamp MC-E LED TABLE OF CONTENTS PRODUCT DESCRIPTION FEATURES CLD-DS16 REV 6 PRODUCT FAMILY DATA SHEET"

Transcription

1 PRODUCT FAMILY DATA SHEET CLD-DS16 REV 6 Cree XLamp MC-E LED PRODUCT DESCRIPTION The XLamp MC-E LED is a lightingclass, multi-chip LED that provides high lumen output in a small footprint package. Compared to discrete LEDs, XLamp MC-E LEDs reduce the distance between LED die, creating a small optical source for excellent optical control and efficient color mixing. XLamp MC-E LEDs can reduce LED system complexity by reducing the number of components required. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including color-changing lighting, portable and personal lighting, outdoor lighting, indoor directional lighting, and entertainment lighting. FEATURES Available in white (2600 K 10,000 K CCT), EasyWhite, or color (RGBW) ANSI-compatible neutral & warm white chromaticity bins Individually addressable LEDs Maximum drive current: 700 ma per LED die Reflow solderable JEDEC J-STD-020 Electrically neutral thermal path RoHS and REACH-compliant TABLE OF CONTENTS Flux Characteristics... 2 Characteristics - Complete Package... 3 Characteristics - Per LED Die (White)... 3 Characteristics - Per LED Die (Color)... 3 Relative Spectral Power Distribution - White... 4 Relative Spectral Power Distribution - Color... 4 Relative Flux Output vs Junction Temperature... 5 Electrical Characteristics... 6 Relative Intensity vs. Current... 6 Typical Spatial Radiation Pattern... 7 Reflow Soldering Characteristics... 8 Notes... 9 Mechanical Dimensions...11 Tape and Reel...12 Dry Packaging and Packaging...13 WWW. CREE.COM/XLAMP Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc Silicon Drive Durham, NC USA Tel:

2 XLAMP MC-E LEDS FLUX CHARACTERISTICS (T J = 25 C) The following tables provide several base order codes for XLamp MC-E. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MC-E Binning and Labeling document. Part Color CCT / Dominant Wavelength Range Base order codes Min Luminous Flux 350 ma* Order Code Min. Max. Group Flux (lm) Cool White 5,000 K 10,000 K Neutral White 3,700 K 5,000 K K 370 MCE4WT-A K01 M 430 MCE4WT-A M01 J 320 MCE4WT-A JE4 K 370 MCE4WT-A KE4 G 240 MCE4WT-A GE7 Warm White 2,600 K 3,700 K H 280 MCE4WT-A HE7 J 320 MCE4WT-A JE7 White 4,000 K K 370 MCEEZW-A K040F EasyWhite (4-Step) 3,500 K J 320 MCEEZW-A J035F 3,000 K J 320 MCEEZW-A J030F 2,700 K H 280 MCEEZW-A H027F 4,000 K K 370 MCEEZW-A K040H EasyWhite (2-Step) 3,500 K J 320 MCEEZW-A J035H 3,000 K J 320 MCEEZW-A J030H 2,700 K H 280 MCEEZW-A H027H Red 620 nm 630 nm 30.6 Green 520 nm 535 nm 67.2 A5 Blue 450 nm 465 nm 8.2 MCE4CT-A A5AAAA1 Color Cool White 5,700 K 7,000 K 100 Red 620 nm 630 nm 30.6 Green 520 nm 535 nm 67.2 A4 Blue 450 nm 465 nm 8.2 MCE4CT-A A4AAAB1 Neutral White 3,700 K 4,300 K 80 Notes: Cree maintains a tolerance of ±7% on flux and power measurements. Typical CRI for cool white and neutral white (3,700 K - 10,000 K CCT) is 75. Typical CRI for warm white (2,600 K - 3,700 K CCT) and EasyWhite is 80. Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 ma. The flux and chromaticity of XLamp MC-E White are measured with all LEDs lit simultaneously. The flux and color of each LED in XLamp MC-E Color are measured individually. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 2

3 XLAMP MC-E LEDS CHARACTERISTICS - COMPLETE PACKAGE The following table lists the product characteristics for the XLamp MC-E LED package. Characteristics Unit Minimum Typical Maximum Thermal Resistance, junction to solder point - white C/W 3 Thermal Resistance, junction to solder point - color C/W 4 Viewing Angle (FWHM) - white degrees 110 Viewing Angle (FWHM) - color degrees 115 ESD Classification (HBM per Mil-Std-883D) Class 2 LED Junction Temperature C 150 CHARACTERISTICS - PER LED DIE (WHITE) The following table lists the product characteristics of each individual LED die within the XLamp MC-E White LED package. Characteristics Unit Minimum Typical Maximum Temperature Coefficient of Voltage mv/ C -4 DC Forward Current ma 700 Reverse Voltage V 5 Forward Voltage 350 ma) V Forward Voltage 700 ma) V 3.4 CHARACTERISTICS - PER LED DIE (COLOR) The following table lists the product characteristics for each LED die within the XLamp MC-E Color LED package. Characteristics Unit Red Green Blue White Temperature Coefficient of Voltage mv/ C Typ DC Forward Current ma Max Reverse Voltage V Max Typ Forward Voltage 350 ma) V Max Forward Voltage 700 ma) V Typ Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 3

4 XLAMP MC-E LEDS Relative Spectral Power Distribution (If = 350 ma per LED) - Whit RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - WHITE The following The following graph graph represents represents typical typical spectral spectral output output of the of XLamp the XLamp MC-E MC-E White White LED with LED all with four all LEDs four on LEDs simultaneously. on simultaneously. 100 Relative Radiant Power (%) Wavelength (nm) 5000K K CCT 3700K K CCT 2600K K CCT RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - COLOR Relative Spectral Power Distribution (If = 350 ma per LED) - Color The following graph represents typical spectral output of the XLamp MC-E Color LED with all four LEDs on simultaneously. The following graph represents typical spectral output of the XLamp MC-E Color LED with all four LEDs on simultaneously. 100 Relative Radiant Power (%) Wavelength (nm) RGBW (6000K) RGBW (4000K) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 4

5 XLAMP MC-E LEDS RELATIVE SPECTRAL POWER DISTRIBUTION (I F = 350 MA PER LED) - COLOR (CONTINUED) The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently. The following graph represents typical spectral output of the XLamp MC-E Color LED with each LED on independently. 100 Relative Radiant Power (%) Wavelength (nm) Red Green Blue White (6000K) White (4000K) RELATIVE FLUX OUTPUT VS JUNCTION TEMPERATURE (I F = 350 MA) The following graph represents typical performance of each LED die in the XLamp MC-E LED. 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% Junction Temperature (ºC) White Red Green Blue Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 5

6 XLAMP MC-E LEDS ELECTRICAL CHARACTERISTICS (T J = 25 C) The following graph represents typical performance of each LED die in the XLamp MC-E LED Forward Current (ma) White, Blue Red Green Forward Voltage (V) Relative Intensity vs. Current (Tj = 25ºC) RELATIVE INTENSITY VS. CURRENT (T J = 25 C) The following graph represents typical performance of each LED die in the XLamp MC-E LED The following graph represents typical performance of each LED die in the XLamp MC-E LED. 200 Relative Luminous Flux (%) Forward Current (ma) White, Blue Red Green Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 6

7 XLAMP MC-E LEDS TYPICAL SPATIAL RADIATION PATTERN The following graph represents typical output of the XLamp MC-E LED with all four LEDs on simultaneously. 120 Relative Luminous Intensity (%) Angle (º) White Color Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 7

8 XLAMP MC-E LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp MC-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder Average Ramp-Up Rate (Ts max to Tp) 3 C/second max. 3 C/second max. Preheat: Temperature Min (Ts min ) 100 C 150 C Preheat: Temperature Max (Ts max ) 150 C 200 C Preheat: Time (ts min to ts max ) seconds seconds Time Maintained Above: Temperature (T L ) 183 C 217 C Time Maintained Above: Time (t L ) seconds seconds Peak/Classification Temperature (Tp) 215 C 260 C Time Within 5 C of Actual Peak Temperature (tp) seconds seconds Ramp-Down Rate 6 C/second max. 6 C/second max Time 25 C to Peak Temperature 6 minutes max. 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 8

9 XLAMP MC-E LEDS NOTES Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects white XLamp MC-E LEDs to maintain an average of 70% lumen maintenance after 50,000 hours, provided the LED junction temperature is maintained at or below 135 C and each LED is operated with a constant current of up to 700 ma. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity XLamp MC-E LEDs are shipped in sealed, moisture-barrier Maximum Percent Relative Humidity bags (MBB) designed for long shelf life. If XLamp MC-E LEDs are exposed to moist environments after opening the MBB packaging but before soldering, damage to the LED may occur during the soldering operation. The following derating table defines the maximum exposure time (in days) Temperature 30ºC 25ºC 20ºC 30% % % % % % % for an XLamp MC-E LED in the listed humidity and temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the baking conditions listed below. Baking Conditions It is not necessary to bake all XLamp MC-E LEDs. Only the LEDs that meet all of the following criteria must be baked: LEDs that have been removed from the original MBB packaging LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above LEDs that have not been soldered LEDs should be baked at 80ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging before baking. Do not bake parts at temperatures higher than 80ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Storage Conditions XLamp MC-E LEDs that have been removed from original MBB packaging but not soldered yet should be stored in a room or cabinet that will maintain an atmosphere of 25 ±5ºC and no greater than 10% RH. For LEDs stored in these conditions, storage time does not add to exposure time as defined in the above Moisture Sensitivity section. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 9

10 XLAMP MC-E LEDS RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, Vision Advisory Claim WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety Application Note (http://www.cree.com/products/pdf/xlamp_eye- Safety.pdf). Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 10

11 A Initial Release 10/16/07 RC.80 TYP. B Change height due to new lens 10/23/2007 RC C Change recommended solder pad footprint 11/26/2007 RC D Height change due to new lens (was 3.86) 12/26/2007 RC Change package height FROM 1.5 TO Add LED reference designators NOTICE E - Delete Series Configuration schematic 5/12/2008 CREE RC CONFIDENTIAL. THIS PLOT AND THE INFORMATION - Add tabs to recommended PCB footprint CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. D XLAMP MC-E LEDS D3 D4 MECHANICAL DIMENSIONS OTICE 1.50 BSC L. PITCH THIS D PLOT AND THE INFORMATION 5 ARE THE PROPRIETARY AND ORMATION OF CREE, INC. THIS PLOT IED, ROPRIETARY 00 T RSON AND REPRODUCED THE WITHOUT INFORMATION DISCLOSED TO ANY AND.10 THE WRITTEN CONSENT OF CREE, INC. THIS PLOT DUCED OR DISCLOSED TO ANY OUT THE WRITTEN CONSENT NK Top View HEATSINK 6 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC ± ±.20.05± ± D C ±.05 A.75 C B All measurements are ±.1mm unless otherwise indicated. HEATSINK 4.48± TYP TYP ±.05 3 Bottom View A 4.48±.20 E 2 REVISIO REV COMMENTS 2 A Initial Release.80 REVISIONS B Change height due to new lens REV COMMENTS TYP. DAT C Change recommended solder pad R3.18 footprint A Initial Release 10/16 B Change height D due Height to new change lens due to new lens (was 3.86) 10/23/ 1 2 C Change recommended Change solder package pad footprint height FROM 1.5 TO 11/26/ 1.45 E - Add LED reference designators D Height change due - to Delete new lens Series (was Configuration 3.86) schematic12/26/ - Add tabs to recommended PCB footprint - Change package height FROM 1.5 TO 1.45 E - Add LED reference designators - Delete Series Configuration schematic 5/12/2 - Add tabs to recommended PCB footprint D2 D3 D1 D4 REV A B C D C Side View 2.60 B Top View R NEGATIVE (-) R BSC PITCH BSC NEGATIVE (-) PITCH DRAWN BY DATE UNLESS OTHERWISE SPECIFIED R.Chaloupecky 10/16/ Silicon Drive 7090MC PARALLEL / INDEPENDENT DIMENSIONS ARE IN Durham, N.C CHECK DATE MILLIMETERS & BEFORE FINISH CONFIGURATION 5.60 TOLERANCE UNLESS SPECIFIED: Ban Loh NEGATIVE (-) 4 5.X ± 0.3 APPROVED DATE A.XX ±.13 TITLE OUTLINE DRAWING, X ± MATERIAL 1.00 TYP. 7090MC PACKAGE 1.50 BSC 8 D1 1 NEGATIVE (-) 1 POSITIVE (+) 1 FOR SHEET B METAL PARTS ONLY SIZE DRAWING NO. REV. A PITCH.X ±.25 FINAL PROTECTIVE FINISH.XX ±.10 C E D5 SCALE 7090MC PARALLEL RECOMMENDED / INDEPENDENTPCB SOLDER PAD X ± 2 20:1 SHEET 1 OF 1 CONFIGURATION D Tolerances: NEGATIVE.10 (-) POSITIVE (+) MC PARALLEL / INDEPENDENT 2. Solder mask windows must be.05 mm bigger CONFIGURATION D than PCB Solder Pad TYP D1 1 D3 NEGATIVE (-) 1 NEGATIVE (-) 3 6 POSITIVE (+) 1 3 POSITIVE (+) 3 TYP. 8 D1 D5 1 D7 NEGATIVE (-) 1 6 POSITIVE (+) D2 D NEGATIVE (-) D4 NEGATIVE (-) 4 5 POSITIVE (+) 2 4 POSITIVE (+) BSC PITCH A A R TYP. D2 D3 D1 D4 D2 NEGATIVE (-) 2 7 D6 2 POSITIVE (+) 2 D2 D3 D1 D4 D BSC PITCH Color D1: Red D2: 7.00 Green D3: Blue D4: White NEGATIVE (-) 1.10 D3 D6 NEGATIVE (-) UNLESS OTHERWISE SPECIFIED POSITIVE (+) 3 A DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH D3 NEGATIVE (-) 3 6 D7 3 TOLERANCE UNLESS SPECIFIED: RECOMMENDED PCB SOLDER PAD POSITIVE (+) 3.X ± D4 D7 NEGATIVE (-) XX ±.13 Recommended 1. Tolerances:.10 PCB Solder Pad POSITIVE (+) 4 THIRD ANGLE PROJECTION 2. Solder mask windows must be.05 mm bigger X ± 1 5 than 1.30PCB Solder Pad. D4 NEGATIVE (-) 4 5 D8 4 FOR SHEET METAL PARTS ONLY POSITIVE (+) 4.X ±.25 DRAWN BY DATE.XX ±.10 D8 UNLESS OTHERWISE SPECIFIED R.Chaloupecky 10/16/07 Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree DIMENSIONS logo ARE and IN XLamp are registered X trademarks of Cree, Inc. ± 2 CHECK DATE MILLIMETERS & BEFORE FINISH. DRAWN BY DATE UNLESS OTHERWISE TOLERANCE SPECIFIED UNLESS SPECIFIED: 3 Ban Loh COMMENDED PCB SOLDER PAD R.Chaloupecky 10/16/07 DIMENSIONS ARE IN.X ± 0.3 APPROVED DATE CHECK DATE MILLIMETERS & BEFORE FINISH..XX ±.13 TITLE lerances: TOLERANCE UNLESS SPECIFIED: Ban Loh lder DED mask PCB windows SOLDER must PAD THIRD ANGLE PROJECTION be.05 mm bigger MATERIAL.X ± 0.3 X ± 1 APPROVED DATE an PCB Solder Pad..XX ±.13 TITLE FOR SHEET METAL PARTS ONLY DRA R.C CHE Ba APPR MATE FINAL O 7

12 XLAMP MC-E LEDS TAPE AND REEL All measurements in mm. 1.75± ± ±.1 1.5±.1 Cathode Side 5.5± Anode Side (denoted by chamfer) END User Feed Direction START Trailer 160mm (min) of empty pockets sealed with tape (13 pockets min.) Loaded Pockets (200 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (34 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 7" 13mm Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 12

13 XLAMP MC-E LEDS DRY PACKAGING AND PACKAGING Humidity Humidity Humidity Indicator Humidity Indicator Indicator Card (inside Indicator (inside bag) bag) Card (inside (inside bag) bag) Dessicant Dessicant Desiccant Desiccant (inside bag) bag) (inside bag) bag) Vacuum-Sealed Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Moisture Barrier Bag CREE Label Bin with Code Cree Bin CREE Label & Code, Barcode Bin with Code Qty, Cree Label Lot Bin # & Code, Barcode Qty, Label Lot # Label with with Customer Cree Bin Label Code, P/N, with with Qty, Customer Qty, Lot Cree #, Lot PO Bin # Code, P/N, Qty, Qty, Lot #, Lot PO # Patent Label Patent Label Label with Customer Order Label Code, with Qty, Customer Reel ID, Order PO # Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 13

14 BINNING & LABELING CLD-AP20 REV 6 Cree XLamp MC-E LED INTRODUCTION This document describes the product nomenclature required to select and order Cree XLamp MC-E LEDs. XLamp MC-E LEDs are tested and sorted into bins which are then combined into orderable kits identified by an order code. All XLamp LEDs are tested and sorted by color and brightness into a unique bin. Each bin contains LEDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). Color XLamp LEDs are sorted by dominant wavelength (color) and luminous flux (brightness). LEDs are shipped on reels containing LEDs from one bin and are always labeled with the appropriate bin code. Kits contain LEDs from a number of similar bins and are fully defined by their order codes. A full explanation of the order codes for XLamp MC-E, as well as a list of standard order codes, is provided in this document. TABLE OF CONTENTS Introduction... 2 Bin and Order-Code Format (White)... 3 Bin and Order-Code Format (EasyWhite)... 4 Bin and Order-Code Format (Color)... 5 Performance Groups Brightness... 6 Performance Groups Chromaticity... 7 Performance Groups Dominant Wavelength... 9 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve Standard Order Codes and Bins (MC-E Cool White) Standard Order Codes and Bins (MC-E Neutral White) Standard Order Codes and Bins (MC-E Warm White) Standard Order Codes and Bins (MC-E EasyWhite) Standard Order Codes and Bins (MC-E Color) WWW. CREE.COM/XLAMP Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at Cree, Inc Silicon Drive Durham, NC USA Tel:

15 CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (WHITE) Bin codes and order codes are configured in the following manner: Order Code SSSGCC-BD-HHHH-NNNNNN Series MCE = MC-E Color WT = White Optical characteristic 2 = Lambertian Kit number Internal code Package configuration A = Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Bin Code SSSGCC-BD-WWW-FF-G-AAAAA Series MCE = MC-E Color WT = White Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Luminous flux group Internal code Optical characteristic 2 = Lambertian Number of chips 4 = 4 chips Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 2

16 CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (EASYWHITE ) Bin codes and order codes are configured in the following manner: Order Code SSSCCC-BD-HHHH-NNNNNNNNN Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Internal code Kit number Optical characteristic 1 = Lambertian Color EZW = EasyWhite Bin Code SSSCCC-BD-WWW-FF-GG-AAAA Series MCE = MC-E Package configuration A = Individually addressable (all anodes on same side) Chromaticity group Internal code Flux group Optical characteristic 1 = Lambertian Color EZW = EasyWhite Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 3

17 CLD-AP20 REV 6 BIN AND ORDER-CODE FORMAT (COLOR) Bin codes and order codes are configured in the following manner: Order Code SSSGCC-BD-HHHH-NNNNNNNNN Series MCE = MC-E Color CT = Red, Green, Blue, White Optical characteristics 2 = Lambertian Internal code Dominant wavelength kit (RGB) Chromaticity kit for white Flux kit Internal code Package configuration A: Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Bin Code SSSGCC-BD-HHHH-NNNMMMKKK Series MCE = MC-E Color CT = Red, Green, Blue, White Optical characteristics 2 = Lambertian Dominant wavelength bin for each die (RGB) Internal code Chromaticity bin for white die Flux bin for each die (RGBW) Package configuration A: Individually addressable (all anodes on same side) Number of chips 4 = 4 chips Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 4

18 CLD-AP20 REV 6 PERFORMANCE GROUPS BRIGHTNESS XLamp MC-E White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous 350 ma (lm) Max. Luminous 350 ma (lm) F G H J K M * Flux and chromaticity are measured with each LED die connected to independent drive circuits at 350 ma. * The flux and chromaticity are measured with all LEDs lit simultaneously. Each LED die in the XLamp MC-E Color LED is tested individually for luminous flux and placed into one of the following luminous-flux groups. The luminous-flux groups for the XLamp MC-E Color LED specify only minimum flux and do not have a maximum. Color Group Code Min. Luminous 350 ma Red K 30.6 Green P 67.2 Blue E 8.2 White J 80 K 100 Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 5

19 CLD-AP20 REV 6 PERFORMANCE GROUPS CHROMATICITY XLamp MC-E White LEDs and the white LED in the XLamp MC-E Color LED are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. The XLamp MC-E White LED is tested with each LED die connected to independent drive circuits at 350 ma and all LEDs lit simultaneously. The white LED in the XLamp MC-E Color LED is tested individually. Region x y Region x y WK WA WM WB WE WN WC WF WP WD WG WJ WH Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 6

20 CLD-AP20 REV 6 PERFORMANCE GROUPS CHROMATICITY (CONTINUED) 3A 4A 5A 6A 7A 8A 40F 40H x y x y x y Region Region Region Region B 3C 3D x y B 4C 4D B 5C 5D B 6C 6D B 7C 7D B 8C 8D F 30F 27F H 30H 27H Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 7

21 CLD-AP20 REV 6 PERFORMANCE GROUPS DOMINANT WAVELENGTH The red, green and blue LEDs in the XLamp MC-E Color LED are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Blue Green DWL Group Min. 350 ma Max. 350 ma K L M Red A Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 8

22 CLD-AP20 REV 6 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE Cool White Neutral and Warm White CCy K 4750K 5300K 3B 3A 3C 3D 4A 4B 4500K 4D 4C 4300K 5A 5B 4000K 5D 5C 6A 3700K 6B 3500K 6D 6C 7A 3200K 7B 7D 2900K 3000K 7C 8A 8B 8D 8C 2700K ANSI C78.377A 2600K CCx Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 9

23 CLD-AP20 REV 6 CREE S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE (CONTINUED) EasyWhite ANSI C Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 3000K 2700K K K K CCy F 30F 27F F CCx ANSI C Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 3000K 2700K K K K 27H CCy H 30H H CCx Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 10

24 CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COOL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Min. Luminous Flux 350 ma* Chromaticity Regions Kit Number Group Flux (lm) Cool White (5000 K 10,000 K) K 370 M 430 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP 000K01 000K02 000K03 000M01 000M02 000M03 For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 11

25 CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E NEUTRAL WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) Neutral White (3700 K K) H 280 5C, 5D, 6A, 6B 000HF K 3A, 3B, 3C, 3D 000JE K 3C, 3D, 4A, 4B 000JF K J 320 4A, 4B, 4C, 4D 000JE K 4C, 4D, 5A, 5B 000JF K 5A, 5B, 5C, 5D 000JE K 5C, 5D, 6A, 6B 000JF K 3A, 3B, 3C, 3D 000KE K 3C, 3D, 4A, 4B 000KF K K 370 4A, 4B, 4C, 4D 000KE K 4C, 4D, 5A, 5B 000KF K 5A, 5B, 5C, 5D 000KE K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 12

26 CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E WARM WHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - White Minimum Luminous Flux 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) Warm White (2600 K K) 6C, 6D, 7A, 7B 000GF K G 240 7A, 7B, 7C, 7D 000GE K 7C, 7D, 8A, 8B 000GF K 8A, 8B, 8C, 8D 000GE K 6A, 6B, 6C, 6D 000HE K 6C, 6D, 7A, 7B 000HF K H 280 7A, 7B, 7C, 7D 000HE K 7C, 7D, 8A, 8B 000HF K 8A, 8B, 8C, 8D 000HE K 6A, 6B, 6C, 6D 000JE K 6C, 6D, 7A, 7B 000JF K J 320 7A, 7B, 7C, 7D 000JE K 7C, 7D, 8A, 8B 000JF K 8A, 8B, 8C, 8D 000JE K K 370 6A, 6B, 6C, 6D 000KE K For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 13

27 CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E EASYWHITE) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s chromaticity regions and luminous flux range. XLamp MC-E LED Standard Order Codes - EasyWhite Minimum Luminous Flux 350 ma* Chromaticity Regions Kit Number CCT Group Flux (lm) EasyWhite 35F 0000H035F 3500 K 35H 0000H035H 3500 K H F 0000H030F 3000 K 30H 0000H030H 3000 K 27F 0000H027F 2700 K 27H 0000H027H 2700 K 40F 0000J040F 4000 K 40H 0000J040H 4000 K 35F 0000J035F 3500 K J H 0000J035H 3500 K 30F 0000J030F 3000 K 30H 0000J030H 3000 K 27F 0000J027F 2700 K 27H 0000J027H 2700 K 40F 0000K040F 4000 K K H 0000K040H 4000 K 35F 0000K035F 3500 K 35H 0000K035H 3500 K Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 14

28 CLD-AP20 REV 6 STANDARD ORDER CODES AND BINS (MC-E COLOR) Preliminary April 29, 2009 The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code s color or chromaticity bins and luminous flux range. Flux Characteristics (T J = 25 C) Red, Green, Blue and White (RGBW) Product MC-E Color (RGBW) XLamp MC-E LED Standard Order Codes - Color Minimum Luminous Flux Min Luminous Color (lm) 350 (lm) Color ma* Dominant DWL Wavelength / Chromaticity 350 ma* Bins Configuration Group Flux (lm) Kit Code Flux (lm) Kit Code Min. Max. Kit Number Order Code Red K 30.6 A Red Green P A 620 2, 3, A5AAAA1 Green Blue E A 520K, L, M 535 A5 MCE4CT-A A5AAAA1 White K 100 WC, WD, WF, WG Blue 8.2 A Red K 30.6 A White** 95 A1 WC, WD WG, WF, Green P , 3, 4 Red Blue E A 620K, L, M A4AAAB1 Green White J A 5A, 5205B, 5C, 5D 535 A4 Blue 8.2 A MCE4CT-A A4AAAB1 For other flux and chromaticity combinations, contact Cree or an authorized distributor. White** 80 B1 5A, 5B, 5C, 5D * Cree XLamp MC-E order codes specify only a minimum flux bin and not a maximum. * Cree maintains Cree a tolerance may ship of ±7% reels on in flux measurement. bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin ** Chromaticity bins restrictions for white specified emitter: by the order code. Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at For warranty information, please contact Cree Sales at 15

Cree XLamp MC-E LED Data Sheet

Cree XLamp MC-E LED Data Sheet Cree XLamp MC-E LED Data Sheet The XLamp MC-E LED is a lighting-class, multi-chip LED that provides high lumen output in a small footprint package. Compared to discrete LEDs, XLamp MC-E LEDs reduce the

More information

Cree XLamp MC-E LED Data Sheet

Cree XLamp MC-E LED Data Sheet Cree XLamp MC-E LED Data Sheet Cree XLamp MC-E LED is a lighting-class multi-chip LED that provides four times the flux of the XLamp XR-E LED in the same footprint. XLamp MC-E LEDs can reduce LED system

More information

Cree XLamp MC-E LED Binning and Labeling

Cree XLamp MC-E LED Binning and Labeling Cree XLamp MC-E LED Binning and Labeling Introduction This document describes the product nomenclature required to select and order Cree XLamp MC-E LEDs. XLamp MC-E LEDs are tested and sorted into bins

More information

Cree XLamp XP-G LEDs Data Sheet

Cree XLamp XP-G LEDs Data Sheet Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for

More information

Cree XLamp MX-6 LEDs Data Sheet

Cree XLamp MX-6 LEDs Data Sheet Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s

More information

Product Description. CLD-DS39 Rev 1. Product family data sheet

Product Description. CLD-DS39 Rev 1. Product family data sheet Product family data sheet CLD-DS39 Rev 1 Cree XLamp ML-B LEDs www. cree.com/xlamp Product Description The Cree XLamp ML-B LED brings lighting-class reliability and performance to 1/4-watt LEDs. The XLamp

More information

Cree XLamp MX-3S LEDs Data Sheet

Cree XLamp MX-3S LEDs Data Sheet Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family

More information

Cree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7

Cree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7 PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability

More information

Product family data sheet

Product family data sheet Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top

More information

Cree XLamp XR-E LED Data Sheet

Cree XLamp XR-E LED Data Sheet Cree XLamp XR-E LED Data Sheet The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy, lifetime and quality of light. These lighting-class

More information

Product family data sheet

Product family data sheet Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 15B Product Description FEATURES Table of Contents The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class

More information

Cree XLamp XP-E LEDs Data Sheet

Cree XLamp XP-E LEDs Data Sheet Cree XLamp XP-E LEDs Data Sheet The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-E LED continues

More information

Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path

Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC

More information

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,

More information

Cree XLamp ML-B LEDs FEATURES TABLE OF CONTENTS PRODUCT DESCRIPTION CLD DS-39 REV0 PRODUCT FAMILY DATA SHEET

Cree XLamp ML-B LEDs FEATURES TABLE OF CONTENTS PRODUCT DESCRIPTION CLD DS-39 REV0 PRODUCT FAMILY DATA SHEET PRODUCT FAMILY DATA SHEET CLD DS-39 REV0 Cree XLamp ML-B LEDs WWW. CREE.COM/XLAMP PRODUCT DESCRIPTION The Cree XLamp ML-B LED brings lighting-class reliability and performance to 1/4-watt LEDs. The XLamp

More information

Cree XLamp XP-C LEDs Data Sheet

Cree XLamp XP-C LEDs Data Sheet Cree XLamp XP-C LEDs Data Sheet The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues

More information

Cree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4

Cree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4 PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED

More information

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16D. Product family data sheet

Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16D. Product family data sheet Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16D Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,

More information

Cree XLamp XM-L LEDs Data Sheet

Cree XLamp XM-L LEDs Data Sheet Cree XLamp XM-L LEDs Data Sheet FEATURES Maximum drive current: 3000 ma Low thermal resistance: 2.5 C/W Maximum junction temperature: 150 C Viewing angle: 125 Available in cool white ANSI-compatible chromaticity

More information

Cree XLamp XR-C LED Data Sheet

Cree XLamp XR-C LED Data Sheet Cree XLamp XR-C LED Data Sheet The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting products. XLamp XR-C LEDs feature electrically neutral

More information

Cree XLamp XP-E LEDs Data Sheet

Cree XLamp XP-E LEDs Data Sheet Cree XLamp XP-E LEDs Data Sheet The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 8% smaller footprint. The XLamp XP-E LED continues

More information

Cree XLamp XP-E LEDs PRODUCT FAMILY DATA SHEET FEATURES TABLE OF CONTENTS PRODUCT DESCRIPTION CLD-DS18 REV 12

Cree XLamp XP-E LEDs PRODUCT FAMILY DATA SHEET FEATURES TABLE OF CONTENTS PRODUCT DESCRIPTION CLD-DS18 REV 12 Cree XLamp XP-E LEDs PRODUCT FAMILY DATA SHEET CLD-DS18 REV 12 PRODUCT DESCRIPTION The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with

More information

Cree XLamp XP-E LEDs Data Sheet

Cree XLamp XP-E LEDs Data Sheet Cree XLamp XP-E LEDs Data Sheet The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 8% smaller footprint. The XLamp XP-E LED continues

More information

Cree EasyWhite Color. temperatures. High lumen density. Wide viewing angle: 125. Minimum 80 CRI at 2700 K and 3000 K CCT

Cree EasyWhite Color. temperatures. High lumen density. Wide viewing angle: 125. Minimum 80 CRI at 2700 K and 3000 K CCT Cree XLamp MPL EasyWhite LEDs Product family data sheet / Binning & Labeling Document CLDDS26 Rev 3A WWW.CREE.COM/XLAMP Product Description The XLamp MPL EasyWhite LED eliminates traditional chromaticity

More information

CLD-DS45 Rev 2A. Product family data sheet

CLD-DS45 Rev 2A. Product family data sheet Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting

More information

Cree XLamp XM-L LEDs. Table of Contents. CLD-DS33 Rev 11C. Product family data sheet

Cree XLamp XM-L LEDs. Table of Contents. CLD-DS33 Rev 11C. Product family data sheet Cree XLamp XM-L LEDs Product family data sheet CLD-DS33 Rev 11C Product Description The XLamp XM-L LED is the industry s highest performance, single die white lighting class LED. The XLamp XM-L LED is

More information

Product family data sheet

Product family data sheet Product family data sheet CLD-DS51 Rev 2 Cree XLamp XP-G2 LEDs Product Description The XLamp XP-G2 LED builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20%

More information

Cree XLamp XR-C LED Data Sheet

Cree XLamp XR-C LED Data Sheet Cree XLamp XR-C LED Data Sheet The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting products. XLamp XR-C LEDs retain the industry-leading

More information

Table of Contents. CLD-DS30 Rev 11E. Product family data sheet. The Cree XLamp ML-E LED

Table of Contents. CLD-DS30 Rev 11E. Product family data sheet. The Cree XLamp ML-E LED Cree XLamp ML-E LEDs Product family data sheet CLD-DS3 Rev 11E Product Description The Cree XLamp ML-E LED brings lighting-class reliability and performance to ½-watt LEDs. The XLamp ML-E LED expands Cree

More information

Product family data sheet

Product family data sheet Cree XLamp XT-E LEDs Product family data sheet CLD-DS41 Rev 1A Product Description XLamp XT-E is Cree s highest performing silicon carbide-based LED technology, delivered in Cree s industry-standard XP/XT

More information

Cree XLamp XB-D LEDs PRODUCT DESCRIPTION FEATURES. CLD-DS45 Rev 10D. Product family data sheet

Cree XLamp XB-D LEDs PRODUCT DESCRIPTION FEATURES. CLD-DS45 Rev 10D. Product family data sheet Cree XLamp XB-D LEDs Product family data sheet CLD-DS45 Rev 1D PRODUCT DESCRIPTION The XLamp XB-D LED brings next generation performance, price and size to all LED lighting applications. The XB-D s footprint

More information

Product family data sheet

Product family data sheet Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with

More information

Product family data sheet

Product family data sheet Cree XLamp MK-R LEDs Product famil data sheet CLD-DS60 Rev 0B Product Description FEATURES Table of Contents Built on Cree s revolutionar SC³ Technolog platform, the XLamp MK R LED brings new levels of

More information

Cree XLamp MT-G EasyWhite LEDs

Cree XLamp MT-G EasyWhite LEDs ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity

More information

Cree XLamp XHP50 LEDs

Cree XLamp XHP50 LEDs Cree XLamp XHP50 LEDs Product family data sheet CLD-DS111 Rev 1F Product Description FEATURES Table of Contents www.cree.com/xlamp Powered by Cree s groundbreaking SC5 Technology Platform, the XLamp XHP50

More information

Cree 5mm Round LED C503B-WAN

Cree 5mm Round LED C503B-WAN PRODUCT FAMILY DATA SHEET CLD-CT876.002 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely

More information

Cree PLCC4 SMD LED CLA2A-WKW

Cree PLCC4 SMD LED CLA2A-WKW PRODUCT FAMILY DATA SHEET CLD-CT931.002 Cree PLCC4 SMD LED PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed to work

More information

Cree PLCC4 3 in 1 RGB SMD LED CLMUC-FKA

Cree PLCC4 3 in 1 RGB SMD LED CLMUC-FKA Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1295.006 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 1.5mm x 1.5mm

More information

Cree XLamp CXB1507 LED

Cree XLamp CXB1507 LED Cree XLamp CXB1507 LED Product family data sheet CLD-DS117 Rev 0F Product Description The XLamp CXB1507 LED Array is a member of the second generation of the CXA family that delivers up to 30% higher efficacy

More information

Cree 5mm Round LED C503D-WAN

Cree 5mm Round LED C503D-WAN PRODUCT FAMILY DATA SHEET CLD-CT935.006 Cree 5mm Round LED PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely

More information

LedEngin, Inc. High Luminous Efficacy Cool White LED Emitter LZ4-00CW10. Key Features. Typical Applications. Description

LedEngin, Inc. High Luminous Efficacy Cool White LED Emitter LZ4-00CW10. Key Features. Typical Applications. Description Key Features High Luminous Efficacy Cool White LED Emitter LZ4-00CW10 High Luminous Efficacy 10W Cool White LED Ultra-small foot print 7.0mm x 7.0mm x 4.1mm Surface mount ceramic package with integrated

More information

Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA

Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package

More information

Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042

Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042 ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry

More information

High flux for outdoor applications

High flux for outdoor applications General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design

More information

Cree PLCC6 3 in 1 SMD LED CLY6C-FKC

Cree PLCC6 3 in 1 SMD LED CLY6C-FKC Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs

More information

Cree PLCC4 3-in-1 SMD LED CLVBA-FKA

Cree PLCC4 3-in-1 SMD LED CLVBA-FKA Cree PLCC4 3-in-1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1165.008 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC4 package. These high reliability and high brightness LEDs

More information

Cree XLamp 7090 UVV LEDs

Cree XLamp 7090 UVV LEDs XLamp 79 UVV Data Sheet Cree XLamp 79 UVV LEDs Benefits Cree XLamp 79 UVV LEDs provide: Industry s most powerful 1-watt package. Maximum operating life. Easy integration with secondary optics. Small footprint

More information

Cree PLCC6 3 in 1 SMD LED SLV6A-FKB

Cree PLCC6 3 in 1 SMD LED SLV6A-FKB Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed

More information

Cree XLamp CXA1816 LED

Cree XLamp CXA1816 LED Cree XLamp CXA1816 LED Product family data sheet CLD-DS74 Rev 6E Product Description The XLamp CXA1816 LED array expands Cree s family of high flux, multi die arrays in a smaller, easy to use platform.

More information

NO LONGER ORDERABLE. LUXEON Rebel. Reliable high-power LED that gives you the design flexibility and performance you need

NO LONGER ORDERABLE. LUXEON Rebel. Reliable high-power LED that gives you the design flexibility and performance you need ILLUMINATION For NEW designs consider this replacement product: LUXEON Rebel Plus LUXEON T FEATURES AND BENEFITS Specified CCT & CRI combinations LUXEON TX LUXEON Z ES LUXEON Rebel Reliable high-power

More information

703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit

703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute

More information

Cree PLCC6 3-in-1 SMD LED CLP6C-FKB

Cree PLCC6 3-in-1 SMD LED CLP6C-FKB PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.

More information

Cree P4 LED CP41B-WES/WGS

Cree P4 LED CP41B-WES/WGS Cree P4 LED PRODUCT FAMILY DATA SHEET CLD-CT1092.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform

More information

Cree 5-mm Round LED C503C-WAS/WAN

Cree 5-mm Round LED C503C-WAS/WAN Cree 5-mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1098.008 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They provide extremely

More information

Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting

Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting ProLight PK2N-3DxE-BVxx 3W Power LED Technical Datasheet Version: 1.2 Features Viewing angle: 55 Best thermal material solution of the world Best Moisture Sensitivity:JEDEC Level 1 RoHS compliant Main

More information

Superior flux density, efficiency and design freedom in the industry s only micro-package UV LED

Superior flux density, efficiency and design freedom in the industry s only micro-package UV LED General Illumination LUXEON Z UV Superior flux density, efficiency and design freedom in the industry s only micro-package UV LED At 1/5 th the size of other ultraviolet and violet LEDs, LUXEON Z UV LEDs,

More information

LUXEON Rebel. Illumination Portfolio. ANSI Binned with Minimum CRI

LUXEON Rebel. Illumination Portfolio. ANSI Binned with Minimum CRI LUXEON Rebel Illumination Portfolio Optimized solutions for illumination applications Technical Datasheet DS63 LUXEON Rebel Illumination Portfolio ANSI Binned with Minimum CRI Introduction The LUXEON Rebel

More information

Cree PLCC6 3 in 1 SMD LED CLY6D-FKC

Cree PLCC6 3 in 1 SMD LED CLY6D-FKC Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1321.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs

More information

General purpose white

General purpose white Illumination LUXEON Rebel General purpose white The LUXEON Rebel general purpose white line of LEDs are ideal for all lighting and illumination applications. These flux differentiated parts, like all other

More information

Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural

Main Applications T8/T5 tube LED bulb Indoor/Outdoor Commercial and Residential Architectural ProLight PJ2N-1FxE-2 1W Power LED Technical Datasheet Version: 1.2 Features Good color uniformity Lead free reflow soldering RoHS compliant Instant light (less than 100ns) No UV Main Applications T8/T5

More information

LUXEON 5630 Mid-Power LEDs Illumination Portfolio

LUXEON 5630 Mid-Power LEDs Illumination Portfolio LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition

More information

LUXEON Rebel. Phosphor-Converted (PC) Amber

LUXEON Rebel. Phosphor-Converted (PC) Amber LUXEON Rebel PC Amber High flux and color stability Technical Datasheet DS62 LUXEON Rebel Phosphor-Converted (PC) Amber Introduction LUXEON Rebel Phosphor-Converted (PC) Amber is an ultra-compact, surface-mount,

More information

Color LEDs that deliver the perfect amount of color you need. No More. No less.

Color LEDs that deliver the perfect amount of color you need. No More. No less. Illumination LUXEON 3535L Color Line Color LEDs that deliver the perfect amount of color you need. No More. No less. The LUXEON 3535L Color Line enables a new era of color lighting. This robust color line

More information

LUXEON TX. Extreme efficacy and best performance with compatibility to LUXEON T ILLUMINATION

LUXEON TX. Extreme efficacy and best performance with compatibility to LUXEON T ILLUMINATION ILLUMINATION LUXEON TX Extreme efficacy and best performance with compatibility to LUXEON T LUXEON TX is designed to deliver high efficacy with high flux density to enable tight beam control in directional

More information

Cree PLCC4 3 in 1 SMD LED CLV1L-FKB

Cree PLCC4 3 in 1 SMD LED CLV1L-FKB Cree PLCC4 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1238.005 PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.

More information

3W RGB High Power LED

3W RGB High Power LED Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters

More information

LZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description

LZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm

More information

InGaN / Metal Alloy Warm White Water clear. Parameter Rating Unit

InGaN / Metal Alloy Warm White Water clear. Parameter Rating Unit Package Dimensions: * All dimensions are in mm * Tolerance: ±0.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 703-0152 InGaN / Metal Alloy Warm White Water clear

More information

Bright domed solution

Bright domed solution AUTOMOTIVE LUXEON Rebel Bright domed solution Automotive grade LUXEON Rebel LEDs are designed and tested to meet and exceed expectations for reliability, performance and lifetime in rear lighting applications.

More information

LUXEON Z ES. Extreme flux density in a micro footprint package for precise optical control ILLUMINATION

LUXEON Z ES. Extreme flux density in a micro footprint package for precise optical control ILLUMINATION ILLUMINATION LUXEON Z ES Extreme flux density in a micro footprint package for precise optical control LUXEON Z ES is a high power 1.6mm x 2.0mm LED that enables never before seen color consistency, luminance,

More information

Cree PLCC6 3 in 1 SMD LED CLX6D-FKB

Cree PLCC6 3 in 1 SMD LED CLX6D-FKB Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1278.005 PRODUCT DESCRIPTION This SMD LED features an IPX8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs

More information

Cree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN

Cree 5-mm Red and Amber Round LED C503B-RAS/RAN/AAS/AAN C503B-RBS/RBN/ABS/ABN C503B-RCS/RCN/ACS/ACN PRODUCT FAMILY DATA SHEET Cree 5-mm Red and Amber Round LED CLD-CT1079.005 PRODUCT DESCRIPTION Round LEDs offer superior light output for excellent readability in sunlight and dependable performance. They

More information

Edixeon S White Series Datasheet

Edixeon S White Series Datasheet Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright

More information

N35L-U High Power LED

N35L-U High Power LED N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U

More information

Cree PLCC4 3-in-1 SMD LED CLV1A-FKB

Cree PLCC4 3-in-1 SMD LED CLV1A-FKB PRODUCT FAMILY DATA SHEET CLD-CT874.009 Cree PLCC4 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.

More information

T5050M-MCL1 High Power Mixing Color LED

T5050M-MCL1 High Power Mixing Color LED PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.

More information

High Power Infrared LED Low Thermal Resistance Suitable for all SMT Assembly Methods ESD Protection RoHS and REACh compliant.

High Power Infrared LED Low Thermal Resistance Suitable for all SMT Assembly Methods ESD Protection RoHS and REACh compliant. SST-10-IR Surface Mount Series Infrared LED Table of Contents Technology Overview.... 2 Product Binning.... 3 Ordering Information... 3 Optical and Electrical Characteristics.... 4 B130 - Mech. Dimensions...

More information

Data Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications

Data Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving

More information

LUXEON Rebel. Illumination Portfolio. ANSI Binned with Minimum CRI

LUXEON Rebel. Illumination Portfolio. ANSI Binned with Minimum CRI LUXEON Rebel Illumination Portfolio Optimized solutions for illumination applications Technical Datasheet DS63 LUXEON Rebel Illumination Portfolio ANSI Binned with Minimum CRI Introduction The LUXEON Rebel

More information

Multiple colors, a single focal length

Multiple colors, a single focal length Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C

More information

X92050C X92050C. Features. Description. Applications

X92050C X92050C. Features. Description. Applications Technical ZPower LED Data X149 Sheet Description X925C ZPower series is designed for high current operation and high flux output applications. Furthermore, its thermal Management characteristic is better

More information

1-Watt SMD 6mm With Dome Lens

1-Watt SMD 6mm With Dome Lens 1-Watt SMD 6mm With Dome Lens x Robust energy-efficient design with long operating life x Low thermal resistance x Exceptional spatial uniformity x Optional optics suit application x Available in yellow,

More information

LUXEON Rebel, White & PC Amber

LUXEON Rebel, White & PC Amber AUTOMOTIVE LUXEON Rebel, White & PC Amber Styling solution for front turn and side marker applications LUXEON Rebel LEDs for automotive has the longest history in high power exterior lighting applications

More information

Edixeon S5 White Series Datasheet

Edixeon S5 White Series Datasheet Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.

More information

LUXEON TX Extreme efficacy that will transform your next market leading luminaire

LUXEON TX Extreme efficacy that will transform your next market leading luminaire LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to

More information

LUXEON Rebel ES. Leading lumen output and efficacy

LUXEON Rebel ES. Leading lumen output and efficacy LUXEON Rebel ES Leading lumen output Technical Datasheet DS61 LUXEON Rebel ES Leading lumen output and efficacy Introduction LUXEON Rebel ES gives you the flexibility you need for designing luminaires

More information

LUXEON 3535L Line. High efficacy in a 3535 package with full range of CCTs and CRIs ILLUMINATION

LUXEON 3535L Line. High efficacy in a 3535 package with full range of CCTs and CRIs ILLUMINATION ILLUMINATION LUXEON 3535L Line High efficacy in a 3535 package with full range of CCTs and CRIs The LUXEON 3535L Line boasts the efficacy and reliability required by the indoor and outdoor illumination

More information

Cree 5mm Round LED C513A-WSS/WSN C513A-MSS/MSN

Cree 5mm Round LED C513A-WSS/WSN C513A-MSS/MSN Cree 5mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1042.007 PRODUCT DESCRIPTION Round LEDs offer superior light output for ecellent readabilit in sunlight and dependable performance. The provide etremel

More information

EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary

EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:

More information

Cree SMD LED Model # LM1-EPG1-11-N2 Data Sheet

Cree SMD LED Model # LM1-EPG1-11-N2 Data Sheet Cree SMD LED Model # LM1-EPG1-11-N2 Data Sheet 12-degree, 3.2 x 2.7 mm, power SMD LED in pure-green color with water-transparent lens Applications Indicators Illuminations LCD Back Lights Automobile Applications

More information

COPYRIGHT 2015 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.1 11/12/15)

COPYRIGHT 2015 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.1 11/12/15) High Luminous Efficacy RGB LED Emitter LZ4-00MC00 Key Features High Luminous Efficacy 10W RGB LED Individually addressable die Unlimited color mixing Ultra-small foot print 7.0mm x 7.0mm Surface mount

More information

F50360 F Features. Applications

F50360 F Features. Applications Technical ZPower LED Data X10490 Sheet F50360 ZPower series is designed for high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions.

More information

Cree P4 LED CP42B-RKS CP42B-AKS

Cree P4 LED CP42B-RKS CP42B-AKS Cree P4 LED CP42B-RKS CP42B-AKS PRODUCT FAMILY DATA SHEET CLD-CT1133.001 PRODUCT DESCRIPTION This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide

More information

P2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant

P2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone

More information

UV SMD LED with Silicone Lens

UV SMD LED with Silicone Lens UV SMD LED with Silicone Lens VLMU35-...-12 DESCRIPTION VLMU35-...-12 series is a ceramic based high power UV LED with silicone lens for long life time. The package size is 3.5 mm x 3.5 mm and the radiant

More information

W724C0 W724C0. Z-Power series is designed for. high current operation and high flux output applications.

W724C0 W724C0. Z-Power series is designed for. high current operation and high flux output applications. W724C0 ZPower series is designed for 사진 high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions. It incorporates state of the

More information

Cree 5mm Round LED C513A-WSS/WSN C513A-MSS/MSN

Cree 5mm Round LED C513A-WSS/WSN C513A-MSS/MSN Cree 5mm Round LED PRODUCT FAMILY DATA SHEET CLD-CT1042.003 PRODUCT DESCRIPTION Round LEDs offer superior light output for ecellent readabilit in sunlight and dependable performance. The provide etremel

More information

5050 Mid Power LED (3.6 W)

5050 Mid Power LED (3.6 W) 5050 Mid Power LED (3.6 W) Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Features: High efficacy Low thermal resistance

More information

T5050M-MCL1 High Power Mixing Color LED

T5050M-MCL1 High Power Mixing Color LED PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and

More information

Cree PLCC2 1-in-1 SMD LED CLM1B-RKW/AKW

Cree PLCC2 1-in-1 SMD LED CLM1B-RKW/AKW Cree PLCC2 1-in-1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1084.003 PRODUCT DESCRIPTION SMD LEDs is packaged in the industry standard package. These LEDs have high reliability performance and are designed

More information