RGB 160. Features and Benefits.

Transcription

1 Features and Benefits Seamless source of dot-free illumination Epistar SMD Light Source Over 16 Million Color Possibilities Flat Surface 160 Beam Angle Bending Diameter of 120 millimeters/ 4.72 inches Fabricated with Eco-friendly, UV-resistant PVC materials Three Year Manufacturer s Warranty Vivid RGB delivers remarkably fluid color transitions by utilizing advanced DMX and LED dimming technology. Using our exclusive Triple-Extrusion technology, Vivid RGB brings you discernibly richer, truer color. Visibly uniform and flicker free, Vivid RGB transitions like no other even in high frame-rate environments. Seen by millions at the 2014 Grammy Awards. For more information please contact toll free: NEON (6366) sales@ledneonflex.com

2 Vivid RGB Technical Specifications Dimensions 11.5 x 29mm /.45 x 1.14in mm /.45.83in Output LED Light Running Length SMD, RGB Light Chip Single feed: 10 meters / 32.8 feet Double feed: 20 meters / 65.6 feet Light Surface Rounded profile 270 Square profile 160 Lumen Maintenance 70,000 Hours 25 C : 90, ,000 Hours 50 : 70,000 Hours 50 C Chromaticity Ordinates x: y: u: v: Color Bin Tolerances +/- 3 % Efficacy (lm/w) CRI 88 Electrical Input Voltage Power Consumption Power Factor 1 LED Count Dimming Physical Materials LED Spacing Cutting Length 24V DC Constant Voltage 12 watts per meter / 3.66 watts per foot 60 LEDs per meter / 18 LEDs per foot v 0-10v & Magnetic Low Voltage Polyvinyl Chloride (PVC) 16.7 millimeter /.66 inch 100 millimeters / 3.94 inches - 6 LEDs Package Size: millimeters / millimeters / inches inches Package Weight: 10.5 kilograms / 23.1 pounds 8 kilograms / 17.6 pounds Thermal Management Fixture Connections Bend Tolerances Maximum Diameter (lateral bending only) Temperature Ranges Ambient Operating Humidity Dependability Warranty Safety Certification IP Rated Cool to the Touch, Free Air Convection Front & End Leader Cables 120 millimeters / 4.7 inches -30 to 45 Celsius / -22 to 113 Fahrenheit -25 to 45 Celsius / -13 to 113 Fahrenheit 0-95% Non Condensing 3 years Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 Factory Order/ IP68 with Accessories Colors Available Color CCT Wave Length Red Nanometer Green Nanometer Blue Nanometer Lumen Count Color Lumen/m Power/m Red Green Blue R+G+B(white) >201lm >751lm >151m >110lm 3 W 4.5 W 4.5 W 12 W Profiles Mounting Tolerance of the light is ±0.2mm. *For DMX controller inquiries please check our website or call for customer service. **Photometric Data available upon request or at

3 3 Year 3 Year Minimum Bend Diameter 4.7 inch Photometric Data Candle Power Distribution Illuminance Characteristics

4 Injection-moulded End Fittings Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only. Bottom Exit Cable Connects light to power supply with pre-installed bottom cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFB LN-11X21-RGB-FA-PFB-1m LN-11X21-RGB-FA-PFB-3m Side Exit Cable Connects light to power supply with pre-installed side cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFS LN-11X21-RGB-FA-PFS-1m LN-11X21-RGB-FA-PFS-3m End Exit Cable Connects light to power supply with pre-installed end cable, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-RGB-FA-PFE LN-11X21-RGB-FA-PFE-1m LN-11X21-RGB-FA-PFE-3m End Cap Pre-installed termination protection of the light, IP68. LN-11X21-FA-EC

5 End Fittings Stocked accessories. Standard on non-factory orders. Power Connector Connects light to power lead, IP68. The following cable lengths are available. (For longer lengths please contact us) Length 1m / 3.2 3m / 9.8 LN-11X21-IP68-RGB-300-L / LN-11X21-IP68-RGB-300-R LN-11X21-IP68-RGB-1M-L / LN-11X21-IP68-RGB-1M-R LN-11X21-IP68-RGB-3M-L / LN-11X21-IP68-RGB-3M-R Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1 End Cap Termination protection of the light. IP68. LN-11X21-IP68-END Tail plug * 1 Silicone gasket *1 Aluminum Billet * 1 Crimp Plate * 1 Jumper Connects two pieces of light together with a flexible cable. IP68 connector. Lengths Available 1m / 3.2 3m / 9.84 LN-11X21-IP68-RGB-J30 LN-11X21-IP68-RGB-J1m LN-11X21-IP68-RGB-J3m Double-end connector *1(Four-pin), Silicone gasket * 2, Aluminum Billet * 2, Crimp Plate * 2 Power T-Feed Connects two pieces of light together with a T joint, powered from the middle. IP68 connector. Lengths Available (L1 & L2) LN-11X21-IP68-RGB-T T joint * 1 (Four-pin) Silicone gasket * 2 Aluminum Billet * 2 Crimp Plate * 2 Seamless Splice Connects two pieces of light together seamlessly. LN-11-IP40-RGB-SPL Silicone gasket * 1 Joint PCB * 1 U steel plate * 2 Crimp Plate * 2 Please Note: Indoor only.

6 Mounting Channel Aluminum Mounting Channel.94 inch.86 inch.54 inch /.13 inch 50 mm / 2 inch LN-11-AL-CLIP 25 mm /.98 inch / Basic, 160 & 270 Models 1000 mm / inch LN-11-AL-1M-CHAN 100 mm / 3.93 inch 200 mm / 7.87 inch Basic, 160 & 270 Models Plastic Mounting Channel.55 inch Please Note: Production Order Only. 21 Day Lead Time. /.13 inch 300 mm / inch LN-11-PL-CLIP 50 mm / 1.96 inch 200 mm / 7.87 inch Basic, 160 & 270 Models 1000 mm / inch LN-11-PL-1M-CHAN 100 mm / 3.93 inch 200 mm / 7.87 inch Basic, 160 & 270 Models

7 Self-locking Aluminum Mounting Channel Uses: Ceilings and Vertical Installations 50 mm / 1.96 inch LN-11-PL-CLIP 25 mm /.98 inch / 25 mm /.98 inch / 1000 mm / inch LN-11-AL-1M-CHAN-SL 100 mm / 3.93 inch 200 mm / 7.87 inch 150 mm / 5.9 inch 350 mm / inch Optional Accessories Male and Female Connectors Cutter Please Note: Factory order only. *Installation guide available upon request or at Naming Convention LN-11X21-24-RGB RGB - Fixture Color 24V - Voltage 11X21 - Profile Size LN - LED Neon Flex

8 Testing Results for LED Neon Flex Performance Standard/Reference value/description Optical Testing Photometric test-integrating sphere system Photometric test-goniophotometer system Illuminance efficiency ratio Uniformity of lighting surface (led neon flex light) RGB color mixture uniformity (led neon flex light) Lumen maintenance test Color-coordinate shift IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length) IES LM 79(lumen intensity distribution & Lux diagram) Product specification sheet Evaluate indirect glare Evaluate the uniformity of color IES LM 80 ANSI C Electrical Testing Normal Temperature Test (77 F) Normal Temperature Test(104 F) UL1598, IEC UL1598, IEC Reliability Testing Lifetime test Electrical insulation test Dielectric voltage withstand test Waterproof test Hi-Lo Temperature impact Ultraviolet (UV) light exposure Salt spray test Anti-cracking test (-13 F) Connector pull test IS TM 21 UI2388, IEC , >4M Ω UI2388, IEC , >1.5KV IP68/IP67/IP65-68 F 140 F ASTM G 26. Exposure Method 1 IEC Assess PVC s anti-cracking property under low temp. 50N Mechanics Testing Pull test (Connector, Body) Impact test Bending fatigue resistance test UI2388 IEC 62262, UL2388 UL2388, IEC

9 Charts

10 Power Supply Configuration Table The maximum length of light for different power supply ratings. Note- 1. * Indicates the power supply is over loaded. 10M/32.8Ft must have power cable installed on both ends of the strip. 2. Example: 18W/83% - 18W is the rated power and 83% is the power efficiency. Wavelength of Color Light

11 Project Details Project Name: Notes: Warehouse Locations United States Canada 6230 W. Desert Inn Rd. Las Vegas, NV T: (702) Milner Road Moncton, NB E1E 2R8 T: (702) For more information please contact toll free: NEON (6366)