1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors"

Transcription

1 ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. 1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors DF19 Series Small configuration and board space Micro-coaxial cable Receptacle FPC DF19G-*P-1H(56) (1.7) Plug DF / 332 / 36SCF PCB Horizontal mounting DF19G-*S-1F(5) DF19G-*S-1F-GND(5) PCB Overview Industry and market accepted as De facto standard for LCD panel connections (panels under 12 inches). High-performance connectors for LVDS high-speed differential signals. (7.7) 1.5±.1 (1.7) Discrete wire FPC DF19G-*S-1C(5) Plug (7.7) DF19-*P-1V(56) Receptacle Features 1. Small configuration and board space Thin design accepts discrete wire, thin micro-coaxial cable (Ø1.5mm, Ø1.6mm max.) and FPC 1.7 mm maximum thick. 2. Common use of receptacle The same receptacle will accept plugs terminated with discrete wire, FPC or micro-coaxial cable. 3. Uniform external dimensions The plug assembly external dimensions remain the same when is terminated with discrete wire, FPC or micro- coaxial cable. 4. Variety of mounting styles Device design engineers have a choice of mounting styles: topboard, offset, reverse mount offset and vertical. 5. Ground connection Metal grounding plates connect with the common ground line. pplications LCD connections in small consumer devices: digital cameras, notebook computers, PD s. ny device requiring high-density interconnection for consistent high speed transmission data rates. (.78) Micro-coaxial cable (7.7) Top-board mounting Offset mounting Reverse, offset mounting 1.3±.2 DF19G-*S-1SD(5) +DF19G-*S-1SD-GND DF19-*P-1V(56) Vertical mounting Discrete wire FPC DF19 Micro-coaxial cable Micro-coaxial cable Twisted pair cable FPC Vertical mounting Notebook PC DF19 DF19 DF19 B253

2 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. Product s Rating Current rating Voltage rating WG#28 : 1 WG#3 :.9 WG#32 :.8 WG#36 :.5 FPC :.5 Micro-coaxial cable WG# 4:.3 1V C Operating temperature range Operating humidity range -35ç to 85ç Note 1-35ç to 85ç Note 2-2% to 8% Storage temperature range Storage humidity range -1ç to 6ç Note 2-4% to 7% Item Conditions 1.Insulation resistance 2.Withstanding voltage 3.Contact resistance 4.Insertion-Extraction force (per contact) 5 Mø min. No flashover or insulation breakdown. 3 mø max. (5 mø max. for FPC) Min..2N, Max. 3N 1 V DC 3 V C / one minute 1 m Measured with a steel pin Ø.2±.5 5.Vibration 6.Humidity (Steady state) 7.Temperature cycle 8.Durability (insertion/ withdrawal) 9.Resistance to soldering heat No electrical discontinuity of 1μs or more. Contact resistance: 3 mø max. (5 mø max. for FPC) Insulation resistance: 5 Mø min. Contact resistance: 3 mø max. (5 mø max. for FPC) Insulation resistance: 5 Mø min. Contact resistance: 3 mø max. (5 mø max. for FPC) No deformation of the insulator parts affecting performance. Frequency: 1 to 55 Hz, single amplitude of.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 4±2ç and humidity of 9% to 95% Temperature: 55ç +5ç to +35ç +85ç +5ç to +35ç Time (Minutes): cycles 3 cycles Re-flow soldering: t the recommended temperature profile Manual soldering: Soldering iron temperature 3ç, 3 seconds Note1: Includes temperature rise caused by current flow. Note2: The term storage refers to connectors stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Note3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials / Finish Product Component Material Finish/Color Insulator Polyamide Beige Receptacle Contacts Grounding plate Phosphor bronze Phosphor bronze Gold plated Tin-copper plated Plug Insulator Polyamide Beige Tin-lead plated Stainless steel Tin-copper plated Crimp contact Contact Phosphor bronze Gold Plated Plug for PPC Insulator Polyamide Beige Contact Phosphor bronze Gold plated Grounding plate for PPC Plug for micro-coaxial cable Grounding plate for micro-coaxial cable Grounding plate Insulator Contact Grounding plate Grounding plate Stainless steel LCP Phosphor bronze Phosphor bronze Phosphor bronze Tin-copper plated Beige Gold plated Tin plated Tin plated Remarks UL94V- UL94V- UL94V- B254

3 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. Ordering information Connector DF19 # - * P - 1 H DF19 # - * S - 1 F - GND Series Name : DF19 3 Number of contacts : 8,,2,3 (Note 1) 2 Configuration Receptacle 4 Connector type S : Plug G : Top-board mounting (1.65mm high) P : Receptacle K : Offset mounting (1.mm high) 5 Contact pitch : 1mm L : Offset mounting (1.1mm high) 6 Mounting type/termination type KR : Reverse offset mounting version of H : Horizontal SMT DF19K (1.mm high) V : Vertical SMT C : Socket-discrete wire (crimp contact) Plug F : Plug FPC Blank : No grounding plate SD : Plug micro-coaxial cable G : With grounding plate 7 dditional separate component Plug for FPC GND : Ground plate (Note 2) G : With grounding plate Grounding plate for FPC G : With grounding plate Plug for micro-coaxial cable G : With grounding plate Grounding plate for micro-coaxial cable G : With grounding plate Note 1: Number of contacts will differ depending on the connector style. Note 2: Grounding plates are required when terminating with the FPC and micro-coaxial cable. Contact DF SCF (* *) Conductor size 283 : WG#28~#3 332 : WG#3~#32 36 : WG#36 Contact type SCF : Plug contact, tape and reel packaging 3 4 Plating : Gold Packaging Blank : 1, pieces / reel (41) : 2, pieces / reel B255

4 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. Right angle receptacle, top-board mounting B P= BPCB mounting pattern 1.85±.1 B± ±.1 P=1±.5.55±.5 2.5± C Outline of the receptacle No conductive traces (56): Tape & reel packaging (1, pieces per reel) Part number CL No. Number of contacts B C Remarks RoHS DF19G-18P-1H (56) DF19G-P-1H (56) DF19G-2P-1H (56) mm high YES DF19G-3P-1H (56) Note: Order by number of reels. B256

5 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. Right angle receptacle, offset mounting B P= BPCB mounting pattern 3.175±.1 B± ±.1 P=1±.5 5.5± ± DF19K identification indicator F 1 C 6.7 F 5.3± Outline of the receptacle Outline of the plug D E±.1 (2.2) (56): Tape & reel packaging (1, pieces per reel) Part number CL No. Number of contacts B C D E F Remarks RoHS DF19K-2P-1H (56) mm high YES DF19K-3P-1H (56) Part number CL No. Number of contacts B C D E F Remarks RoHS DF19L-P-1H (56) DF19L-2P-1H (56) mm high YES DF19L-3P-1H (56) Note: Order by number of reels. B257

6 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. Right angle receptacle, reverse offset mounting B P= C BPCB mounting pattern 3.175±.1 B± ±.1 P=1±.5 5.5± ± ±.1 Outline of the receptacle.3 (2.2) Outline of the plug D E±.1 (56): Tape & reel packaging (1, pieces per reel) Part number CL No. Number of contacts B C D E Remarks RoHS DF19KR-P-1H (56) DF19KR-2P-1H (56) mm high YES Note: Order by number of reels. B258

7 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. Vertical receptacle 1.12 P= B C BPCB mounting pattern D± Outline of the plus ± ± ±.5 P=1±.5.55±.5 (E) (F) ±.5 G±.5 Conductive traces in this area must be covered by dielectric compound. (56): Tape & reel packaging (1, pieces per reel) Part number CL No. Number of contacts B C D E DF19-P-1V (56) DF19-2P-1V (56) Note: Order by number of reels. F G RoHS 13 YES 19 B259

8 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. Plug (Discrete wire) DF19-*S-1C P=1 B DF19G-*S-1C(5) B P= Contact No. 5 and multiples indicator 1.5 Contact No. 5 and multiples indicator 1.5 No. of contacts indicator Shown with terminated and installed contacts Blank,(5): Bag packaging (1 pieces per bag) Part number CL No. Number of contacts B RoHS Part number CL No. Number of contacts B RoHS DF19-18S-1C DF19G -18S-1C(5) DF19 -S-1C DF19G -S-1C(5) YES DF19-2S-1C DF19G -2S-1C(5) YES DF19-3S-1C DF19G -3S-1C(5) Note: Order by number of bags. Crimp contacts Part number CL No. Packaging Quantity Finish RoHS DF19-283SCF (* *) ** See s DF19-332SCF (* *) ** Tape & reel Gold plated YES number below DF SCF (* *) **.7.63 number * *(* *) Blank: Tape & reel packaging (1, pieces per reel) (41) : Tape & reel packaging (2, pieces per reel) pplicable cable (Tin plated annealed conductor) Wire size (stranded wire conductor) Jacket diameter 2 WG#28 (7/.127 mm) WG#3 (7/.1 mm) WG#32 (7/.8 mm) WG#36 (7/.5 mm).5mm to.6mm.27mm Carrier strip.5 pplicable UL style UL1571 (Note2) Strip length 1.2mm to 1.9mm Note 1: When using other than the recommended wire, contact your Hirose sales representative. Note 2: Contact your Hirose sales representative when using WG#36. t=.15 Tools Part pplicator Press unit Part number P15-DF19S CM-15 CL No Note 1: Use of other than Hirose Electric approved tools will void the product warranties. Note 2: Contact Hirose for the wire striping, contact crimp and contact insertion instructions. B26

9 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. Plug (Flat Printed Circuit) Note: Socket and grounding plate is required. P=1 B C 5.95 CV No. 1.2 Shown terminated with FPC Polarizing mark indicator D±.8.45±.3.3±.15 C±.5 t=.5±.3 P=1±.3.7±.3.35±.25 R.2 MXR ±.25 2±.15 (.35) 2.2±.5.2±.15.2±.1 R.2.4±.5.5.3±.15.35±.3.5 E±.5 Signal area < :1 to 5μm thick solder plated> Part number CL No. Number of contacts B C D E RoHS DF19G-S-1F(5) DF19G-2S-1F(5) YES DF19G-3S-1F(5) Note: Order by number of bags. MXR R.1±.5 Ground area < :1 to 5μm thick solder plated> (5): Bag packaging (1 pieces per bag) Ground plate for FPC B No. of contacts indicator 4.1 SIGNL C D 1.5 Part number CL No. Number of Contacts B C D RoHS DF19G-S-1F-GND(5) DF19G-2S-1F-GND(5) DF19G-3S-1F-GND(5) YES Note: Order by number of bags. Grounding plate installation tools (5): Bag packaging (1 pieces per bag) Type Part number CL No. Desktop tool (for pos.) Desktop tool (for 2 pos.) Desktop tool (for 3 pos.) DF19G-S/PR-MD2 DF19G-2S/PR-MD2 DF19G-3S/PR-MD Note1: Product is not guaranteed unless Hirose approved tools are used. B261

10 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. Plug (Micro-coaxial cable) B P= ±.1.7±.5.9MX 1.33 C±.2 D±.15 P=1±.1 Inner conductor Insulator Grounding bar Solder coat 1.2MIN Outer conductor Jacket Cable preparation Shown terminated with micro-coaxial cable Note 1: Connectors are designed to allow termination without cutting of the pitch loss prevention tape. Note 2: Required Solder coating for inner conductor. Note 3: When using 2-conductor micro-coaxial cable some contact positions will not be used. Contact your Hirose sales representative. Part number CL No. Number of contacts B C D RoHS DF19G-S-1SD(5) YES DF19G-2S-1SD(5) Note: Order by number of bags. (5): Bag packaging (1 pieces per bag) pplicable cable (Micro-coaxial cable) Wire size (stranded wire center conductor) WG#4 (7/.3mm) Jacket diameter.3mm to.4mm Grounding plate for micro-coaxial cable Part number DF19F-S-1SD-GND DF19G-2S-1SD-GND Blank: Bag packaging (1 pieces per bag) CL No Number of contacts 2 RoHS 17.5 YES 23.5 B262

11 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. BEmbossed Carrier Tape Dimensions Receptacles DF19G-*P-1H(56) DF19K-*P-1H(56) DF19L -*P-1H(56) Ø ±.1 2±.1 4±.1 G 1.75±.1 C±.1 B±.1 ±.3 G-G 1.75±.15 t=.3±±.1 D±.3 2±.5 Part number label Depth of 1.5 diameter Ø13 Ø8 Ø33 H 2.5±.15 H-H H G Unreeling direction Ø21 E +2 F (2.3) 7.8±.3 Connector Number of contacts B C D E F Remarks DF19G-18P-1H(56) DF19G-P-1H(56) DF19G-2P-1H(56) DF19G-3P-1H(56) DF19K-2P-1H(56) DF19K-3P-1H(56) DF19L-P-1H(56) DF19L-2P-1H(56) DF19L-3P-1H(56) Top-board mounting (1.65mm high) Offset mounting (1.mm high) Offset mounting (1.1mm high) DF19KR-*P-1H(56) Ø ±.1 G 1.75±.1 G-G 1.75±.15 t=.3±.1 C±.1 B±.1 ±.3 D±.3 2±.5 Part number label Ø1.5 in the rear Ø13 Ø8 Ø33 H H 2.85±.15 H-H G Unreeling direction Ø21 E +2 F 7.8±.3 Connector Number of contacts B C D E F Remarks (2.3) DF19KR-P-1H(56) Reverse type of DF19K DF19KR-2P-1H(56) Offset mounting (1.mm high) DF19-*P-1V(56) Ø ±.1 2±.1 4± ±.1 H 3.7±.2 H G 4±.2 G C±.1 B±.1 ±.3 D±.2 t=.4±.1 Unreeling direction 2±.5 Part number label Ø21 Depth of 1.5 diameter Connector Number of contacts B C D E F Remarks DF19-P-1V(56) Vertical receptacle DF19-2P-1H(56) Ø13 +2 E+ F Ø8 Ø38±2 B263

12 ll non-rohs DF19 products Series 1 have been discontinued, mm Contact or will Pitch, be discontinued Board-to-Cable, soon. Please check Board-to-FPC, the products status Board-to-Micro-coaxial on the Hirose website RoHS search Cable at Connectors or contact your Hirose sales representative. BUse recommendations 1. Recommendedtemperature profile Temperature(ç) 25ç 2ç ç 1ç Preheating soldering 6 to 12(S) 25ç 1(s)max 22ç min 6(s)max 5ç TIME(S) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. Note 3: The product can be used without trouble though the surface of a grounding plate might discolor. 2. Manual soldering 3. Screen thickness 4. Board warpage 5. Cleaning conditions 6. Termination conditions 7. Precautions 8. Precautions Manual soldering: 29±1ç for 3 seconds.15mm Maximum of.3mm at the connector center, with both ends of the connector as reference points. Refer to Nylon Connector Use Handbook. Refer to Nylon Connector Use Handbook. Do not twist when mating/un-mating. Refer to Nylon Connector Use Handbook. B264

13 ll non-rohs products have been discontinued, or will be DF19 discontinued Series 1 soon. Please mm check Contact the products Pitch, status Board-to-Cable, on the Hirose website RoHS Board-to-FPC, search at Board-to-Micro-coaxial or contact your Cable Hirose Connectors sales representative. BPlug (FPC Type) Termination Procedures (Dedicated ssembly Tooling is required.) Insert the FPC diagonally from the top surface of the grounding plate. Step 1 Pass the FPC through the grounding plate. fter passing through, lower the FPC (as shown) to horizontal position. Step 2 Signal surface Ground surface Extend the FPC out and fully insert into the socket. Step 3 Exercising caution slide the grounding plate forward and pre-insert it over the socket. Step 4 ssembly point: Slightly raise the FPC to an angle of about 3 degrees, and then insert the grounding plate over the socket. Using the dedicated installation tool, insert the grounding plate. Final completion 1.7 Note 1: The grounding plate and the plug are supplied as separate components. Note 2: Dedicated assembly fixtures are required at each stage of the termination process. For detail, refer to the instruction manual supplied with the tools. Note 3: Do not apply excessive forces to FPC (Bending or twisting) as it may introduce cracks in the copper foil (on the cover film edge). Note 4: To protect the FPC, insertion and disconnection of the connectors should be performed parallel to the mating direction. Note 5: Do not apply excessive tension to FPC. Note 6: Refer to FPC manufacturer for bend radius and other specific recommendation. Distance should be allowed for the bending position, as illustrated below. SIGNL MIN 1 MIN 5 Note 7: Follow the instruction manuals for the termination and assembly fixtures and tools. B265

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. 0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts

More information

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80% All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector .4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 3 contacts: 5 locations

More information

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors 0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small

More information

Make sure that the MUTE button on your phone is depressed during the voice explanations.

Make sure that the MUTE button on your phone is depressed during the voice explanations. Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 What will we talk about Contact pitch 2 mm and smaller Contact pitch larger than 2.5 mm DF19 ( 1 mm pitch ) DF20

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) ll non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH1C & FH1SC Series Actuator color: Brown FH1SC FPC/FFC thickness: 0.±0.0mm Actuator color: Black Features

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Interface RF Connector with Switch

Interface RF Connector with Switch NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight

More information

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz HMCC SERIES Features: Low Profile Mated Height: (2.4mm) Ultra small PCB profile and surface area High Frequency Performance to 6 GHz Highly Shielded, Ultra-fine Coaxial Cable Three different sizes available

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

Interface Connectors for CDMA Type Cellular Phones

Interface Connectors for CDMA Type Cellular Phones Interface Connectors for CDM Type Cellular Phones MQ/SF178 Series Two interface configurations 1X Key 1X EV-DO Key Signal contacts Coaxial connector Features 1. Complies with the requirements of NC-R1-18

More information

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height N.FL Series Mated height comparison (With U.FL-LP(V) ) Features 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size:

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector 0.5mm Pitch SMT Board to Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors .3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors FH39 Series 3.45mm Depth 1.1mm Features 1. Low-profile.3mm pitch connector with top and bottom contact

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors 0.mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series Space saving(51 pos. shown) 1.0mm.2mm.8mm Metal fittings do no protrude outside of the connector body Features

More information

Subminiature, LAN Modular Jack Connectors

Subminiature, LAN Modular Jack Connectors Subminiature, LAN Modular Jack Connectors TMR-5M Series Features.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for,-3,6

More information

Modular Plug Connectors Compliant to Enhanced Category 5 Standards

Modular Plug Connectors Compliant to Enhanced Category 5 Standards Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm Apr.1.20 Copyright 20 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low-profile 0.3 mm pitch FPC

More information

0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors

0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors .4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Features 1. High density mounting Space saving design that has a minimum connector width,

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high

More information

ZIF Connector & Flat Flexible Cable

ZIF Connector & Flat Flexible Cable ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed

More information

RJ45 Modular Jack Connectors with Pulse Transformers

RJ45 Modular Jack Connectors with Pulse Transformers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector 0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector FH55 Series FH55 Differential Impedance 70ps rise time(20-80%) 100+15%[ø] 100[ø] 100-15%[ø] Dimensional Diagram: 40 pins Characteristics

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

Directory chapter 04

Directory chapter 04 M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................

More information

The SMT/QuickGrip VSWR

The SMT/QuickGrip VSWR Connectors Product Facts Solderless Cable Termination [.118] Mated Height Excellent Cable Retention Usable With Flexible and Semi-Rigid Micro-Coaxial Cables Tape and Reel Packaging system. The design provides

More information

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors MAXIMUM SOLUTIONS Mill-Max Offers New SuperSpeed USB 3.0 Connectors Mill-Max has expanded its USB family to include four new USB 3.0 connectors. USB 3.0, SuperSpeed USB, provides a 10 X faster data transfer

More information

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00

More information

08. SEK IDC CONNECTORS

08. SEK IDC CONNECTORS . IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these

More information

I-PEX MHF4 Micro Coaxial Connector

I-PEX MHF4 Micro Coaxial Connector PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting

More information

STANDARD MICRO-D CONNECTORS

STANDARD MICRO-D CONNECTORS STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector

More information

QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications

QR/P8 SERIES. Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications QR/P8 SERIES Ultra-small Rectangular Multi-electrode solderless Connectors for Rack and Panel Applications General QR/P8 Series is a series of small connectors for rack and panel application. This is a

More information

EH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features

EH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")

More information

Amphenol Taiwan Branch

Amphenol Taiwan Branch for Board to Board and wire to Board use. Other cable lengths and customer design available. RoHS compliance. USB 3.0 Type A, Right Angle, Plug, SMT, Standard Type Co-planarity: 0.08mm max. Voltage: 30.0

More information

.062 [1.57] Commercial Pin and Socket Connectors

.062 [1.57] Commercial Pin and Socket Connectors Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin

More information

SMA Connectors. RF Coax Connectors. Product Facts

SMA Connectors. RF Coax Connectors. Product Facts SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes

More information

MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors

MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board

More information

3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series

3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission

More information

0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors

0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors 0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)

More information

Waterproof Connectors for Outdoor Use

Waterproof Connectors for Outdoor Use Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight

More information

Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various

Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various connectors manufactured by Hirose and to discuss some of

More information

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors .5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors DF8 Series Excellent mating workability ±1mm ±1mm Z Y X Figure 1 Features 1. High speed signal connector With its excellent signal

More information

COAX/SIGNAL HYBRID MICRO-D CONNECTORS

COAX/SIGNAL HYBRID MICRO-D CONNECTORS COAX/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed coax/signal contact layouts. The number of coax and signal contacts may be specified to provide

More information

SOCKETS FOR SD MEMORY CARD (R TYPE)

SOCKETS FOR SD MEMORY CARD (R TYPE) Enhanced robustness and EMI resistance achieved by the laser-welded double-sided metal shell (SDHC card compatible, with card jump-out and wrong insertion prevention functions) AXA2R SOCKETS FOR SD MEMORY

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions

More information

Coaxial Line Stretchers

Coaxial Line Stretchers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

COAXICON Contacts. RF Coax Connectors. Product Facts

COAXICON Contacts. RF Coax Connectors. Product Facts COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable

More information

INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.

INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having

More information

SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version

SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

Board-to-Cable Connector for High-speed Transmission HD Series Connector

Board-to-Cable Connector for High-speed Transmission HD Series Connector COMPONENTS PRODUCT INFORMATION NEW Board-to-Cable Connector for High-speed Transmission HD Series Connector CONNECTOR MB-0247-1 June 2012 RoHS Compliant Features 40 position 30 position JAE has recently

More information

68 Position PC Card Receptacles

68 Position PC Card Receptacles 68 Position PC Card Receptacles Methode s 68 position receptacles are PCMCIA and JEIDA compatible and are available in straddle mount and single sided surface mount configurations. The independent dual

More information

400 Series Buccaneer BUCCANEER BUCCANEER. Flex, Flex In-Line, Front Panel, Rear Panel and PCB mounting body styles. Sealed to IP68 when mated

400 Series Buccaneer BUCCANEER BUCCANEER. Flex, Flex In-Line, Front Panel, Rear Panel and PCB mounting body styles. Sealed to IP68 when mated Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body O Ring Main Body Contacts Contact Carrier Cable Gland Collet Gland Nut Sealed to IP68 when mated IP68 rating tested

More information

Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height

Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB

More information

CCM05 SD, MMC & minisd

CCM05 SD, MMC & minisd For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.

More information

SMASH The high density interconnect system for harsh environment applications

SMASH The high density interconnect system for harsh environment applications 66 Amphenol Board Level Interconnect products SMASH The high density interconnect system for harsh environment applications The SMASH connector offers extremely high robustness where signal integrity is

More information

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2)

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2) SIMPLE WIRE-PRESS CONNECTORS SIMPLE WIRE-PRESS CONNECTORS (Compliant with e-con) New Wire connection plug 2. The structure is designed to temporarily hold inserted wires before crimping, allowing for high

More information

400 Series Buccaneer BUCCANEER POWER. bulgin

400 Series Buccaneer BUCCANEER POWER. bulgin bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when

More information

SMA Interface Mating Dimensions (Per MIL-STD-348)

SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808

More information

Micro MATE-N-LOK 3 mm Connector System

Micro MATE-N-LOK 3 mm Connector System Product Facts Wire-to-wire and wire-toboard pin and receptacle connector system ontacts are on 3 mm [] centerline spacing -1 contact positions single row - contact positions dual row Panel mount or free-hanging

More information

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can

More information

Quick Reference Guide Mini-Universal MATE-N-LOK Connector System

Quick Reference Guide Mini-Universal MATE-N-LOK Connector System Quick Reference Guide The offers wire-to-wire and wire-to-board connections with contacts on a 4.14 mm [.163] centerline and current ratings up to 9.5 Amps max. per line. Plug and receptacle housings allow

More information

Coaxial Line Stretchers

Coaxial Line Stretchers Coaxial Line Stretchers These coaxial line stretchers maintain an impedance of 50ø while changing the length of the coaxial tube and adjusting the phase. One type is locked after the adjustment and another

More information

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing. Product Specification 108-1403 07Nov08 Rev A All Paragraphs Revised AMPOWER* Wave Crimp System Self-Aligning Header and Receptacle Assemblies 1. SCOPE 1.1. Content This specification covers performance,

More information

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us.

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us. 58 Interconnect products SMASH Advanced SEM E modular connector The SMASH connector offers extremely high robustness where signal integrity is required. Based on an aluminium shell with 1, 2 or 3 bays,

More information

Product Specification

Product Specification Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should

More information

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0. ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)

More information

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2 edac EJ/1115/V2 Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference edac Our Capabilities We have been designing and manufacturing interconnect products for over 50 years.

More information

Connection Systems. High Density Printed Circuit (HDPC) Connectors

Connection Systems. High Density Printed Circuit (HDPC) Connectors Connection Systems High Density Printed Circuit (HDPC) Connectors Connection Systems High Density HDPC Connectors Get connected with our expanding family of high quality connectors Delphi Connection Systems

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down

More information

Instructions for assembling the WARS Powerpole Distribution Kit. (V2)

Instructions for assembling the WARS Powerpole Distribution Kit. (V2) Instructions for assembling the WARS Powerpole Distribution Kit. (V2) Warning: The construction of this project should only be undertaken by persons with the requisite skills and knowledge and should only

More information

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES

DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES INCH-POUND MS27613G 7 August 2015 SUPERSEDING MS27613F 14 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES Inactive for new design after 14 November

More information

IL-AG5 SERIES AUTOMOTIVE CONNECTORS

IL-AG5 SERIES AUTOMOTIVE CONNECTORS 025 Crimp, PCB-to-Cable/Cable-to-Cable Applications GENERAL SPECIFICATIONS Number of 5, 6, 7, 10 (single row) 14, 16, 18, 22, 30 (double row) Contact Spacing 2.5mm (.098") Current Rating 3 Amps Dielectric

More information

MICRO SFP+ CONNECTOR & CABLE ASSEMBLY

MICRO SFP+ CONNECTOR & CABLE ASSEMBLY MICRO SFP+ CONNECTOR & CABLE ASSEMBLY micro SFP+ Connector and Cable Assembly TE Connectivity s (TE) micro SFP+ connector and cable assembly empower you to dream big when designing your communication system.

More information

SMS - Qikmate. Performance characteristics

SMS - Qikmate. Performance characteristics - Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective

More information

High Density Low Profile Connectors

High Density Low Profile Connectors High Density Low Profile Connectors High density contact arrangement Light weight Low profile mated height Surface mount termination technology Miniature hyperboloid socket contacts Interfacial seal Polarized

More information

Standard Buccaneer - Ethernet

Standard Buccaneer - Ethernet IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version

More information

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density

AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of

More information

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications

More information

QM (1.78mm-.070") CONNECTORS-"MICRO 70"

QM (1.78mm-.070) CONNECTORS-MICRO 70 QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable

More information

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02. Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11

More information

BUCCANEER FOR POWER 400 Series Buccaneer

BUCCANEER FOR POWER 400 Series Buccaneer Sealed to IP68 when mated IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V rating 2.5mm contact engagement

More information

Poke-Home Thru-Wire: WTW

Poke-Home Thru-Wire: WTW Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical

More information

AMP Soft Shell Pin and Socket Connectors

AMP Soft Shell Pin and Socket Connectors Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components

More information

Wire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C)

Wire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C) IDC Connectors for Discrete Wires Trouble-free discrete-wire termination with IDC Sockets that accommodate MIL Plugs. XG5 * Two-slot, IDC construction and insulation barrel offer high reliability and large-current

More information

Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4

Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4 This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable

More information

400 Series - Mini USB Buccaneer

400 Series - Mini USB Buccaneer IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,

More information

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC FH41 Series THine Electronics, Inc. Next-generation chipset (V-by-One HS*) Compatible connector Features 1. Compatibility

More information

AMP Standard Terminals and Splices. RoHS. Ready

AMP Standard Terminals and Splices. RoHS. Ready AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control

More information

Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes

Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can

More information