2012 / storage systems technical manual

Transcription

1 2012 / 2013 storage systems technical manual

2

3 S T G E R M A I N 11/2012 3

4 4 11/2012

5 S T G E R M A I N Technical features Wardrobe modular system consisting of front panels made of honeycomb panels. The wardrobes can be fi tted with internal accessories, LED lamps, elements for bridge compositions, specific tall units for corner compositions and terminal tall units with depth change. St Germain can be proposed in 4 different versions: 1. wardrobe with hinged doors 2. wardrobe with sliding doors 3. wardrobe with coplanar sliding doors 4. walk-in closet WARDROBE Dimensions - - Hinged door > h. 2322, 2610, 2898 mm / module W. 425, 575, 875, 1175 mm / Total depth: 600 mm. - Sliding door > h. 2322, 2610 mm / module W. 875, 1175, 1775 mm / Total depth: 605, 642 mm. - Coplanar sliding door > h. 2322, 2610 mm / module W. 875, 1175 mm (only pre-confi gured compositions) Total depth: 605 mm. Structure: completely made of wood particle boards with very low formaldehyde emission, class E1, 25 mm. thick with external fi nish in melamine. Shelves: 35 mm. thick. Distance of shelves drilling holes on side panels: mm. Terminal side panels: fi nished on external visible side and frontal edge (please note that the fi nished side panels are lacquered in polished white when used with doors in white Policoat). Plinth and upper fixed front profi le in black colour. The sliding mechanism of sliding and coplanar sliding doors is covered, in the upper part, with black metal. Finish: white melamine - thermo-treated larch-wood melamine. Front panels: the matt lacquered, wood and polyester fi nishes are made of 25 mm. honeycomb board panels with structure in solid wood + honeycomb. Policoat fi nish made of wood particle boards with very low formaldehyde emission, plated with polished metachrylate plate (Policoat): the total door thickness is 22 mm. Hinges have three settings and a device for a controller closure. Finishes: 1) Policoat - 2) Matt lacquer - 3) Wood - 4) Polyester. Accessories - DRAWER UNITS: structure made of 12 mm. black wood particle panels; front panels made of 18 mm. wood particle panels, treated with high quality resin. Carcass made of melamine-coated wood particle boards with very low formaldehyde emission, class E1, 35 mm. thick. Edges in ABS in same colour. Totally extractable drawer glides with integrated soft closure device. Handle, positioned on whole frontal width, is made of extruded aluminium profi le, varnished in matt black. TROUSER-HOLDERS: Frame in wood, white matt lacquered (for wardrobe structures in white melamine) or black matt lacquered (for wardrobe structures in melamine thermo-treated larch-wood). Rods in black PVC, covered with anti-slip transparent varnish. Totally extractable glides with integrated soft closure device. CLOTHES RODS: in black anodised aluminium, moulded supports in matt black nylon. PULL-OUT SHELVES FOR SHIRTS AND TRAYS: frame in wood, matt white lacquered (with structures in white melamine) or matt black (with structures in thermo-treated larch melamine-coated wood), with 35 mm. thick shelf in melamine-coated fi nish and sides in black metal. Totally extractable glides with integrated soft closure device. PULL-DOWN HANGING RAIL: in metal, matt black varnished, with matt black plastic elements. Finish: white melamine - thermo-treated larch-wood melamine (black for internal part of drawers and different details) Lighting - LED lamps, 2,88 W, W. 242 mm, white frame, voltage 24 V. They are supplied with presence sensor with relative automatic switch. Light colour temperature: 3200 Kelvin. WALK-IN CLOSET Dimensions - H.: 2322, 2610, 2898 mm / module W.: 541, 841 mm / Total depth: 530 mm. Structure - UPRIGHTS: in aluminium profi le, matt black varnished, with rack (32 mm. distance) for accessories fastening. BACK PANELS: made of 18 mm. wood particle panels, melamine or matt lacquered fi nishes. SHELVES: made of 35 mm. honeycomb board. The shelves have sides in matt black metal (h. side: 60 mm, upper extended part: 25 mm). BASEMENTS: made of wood particle panels, with low formaldehyde content. The basement is fi tted with adjustable feet and plinth in aluminium, varnished in matt black. Finishes: white melamine - thermo-treated larch-wood melamine - matt lacquered with elements in metal/matt black aluminium. Accessories - DRAWER UNITS: structure made of 12 mm. black wood particle panels; front panels made of 18 mm. wood particle panels In melamine or matt lacquered. Upper panel made of melamine-coated wood particle boards with very low formaldehyde emission, class E1, 35 mm. thick. Totally extractable drawer glides with integrated soft closure device. Handle, positioned on whole frontal width, is made of extruded aluminium profile, varnished in matt black. Version with wheels: 4 castors (2 with brake), drawer back panel in same finish as carcass. TROUSER-HOLDERS: Frame in wood, white matt lacquered (for wardrobe structures in white melamine) or black matt lacquered (for wardrobe structures in melamine thermo-treated larch-wood). Rods in black PVC, covered with anti-slip transparent varnish. Totally extractable glides with integrated soft closure device. CLOTHES RODS: in black anodised aluminium, printed supports in matt black nylon. Finishes: white melamine - thermo-treated larch-wood melamine - matt lacquered (matt black for internal part of drawers and other details). Lighting - LED lamps, 2,88 W, W. 242 mm, white frame, voltage 24 V. They are supplied with presence sensor with relative automatic switch. Light colour temperature: 3200 Kelvin. 11/2012 5

6 S T G E R M A I N Photo details Wardrobe with hinged doors Drawer unit for wardrobe Wardrobe with sliding doors Trouser-holder for wardrobe Shirts tray for wardrobe Pull-down hanging rail for wardrobe Walk-in closet Shelf for walk-in closet 6 11/2012

7 S T G E R M A I N Technical details Melamine structure Melamine structure Middle side panel in melamine, 25 mm. thick Finished terminal side panel, 25 mm. thick Finished hinged / sliding / coplanar sliding door, 22 / 25 mm. thickness 11/2012 7

8 S T G E R M A I N Colours and wood species (for exact colours please see physical samples) The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims. INTERNAL STRUCTURE - (Melamine) 126 White 610 thermo-treated larch-wood POLICOAT - (Polished methacrylate) 003 White MATT LACQUERED 003 White 129 Magnolia 009 Cream 106 Sahara 119 Grey (Lamicolor 1366) 022 Green apple 018 Clay 110 Orange 010 Red 137 Iron 011 Green-Brown 134 Graphite grey (Lamicolor 1397) 013 Night-blue 120 Moka (Lamicolor 15) WOOD - (veneered wood) 028 White larch-wood 029 Light grey larch-wood 030 Grey larch-wood 031 Black larch-wood POLYESTER - (polished lacquered in polyester) 003 White 129 Magnolia 106 Sahara 004 Grey 027 Black 063 Sand 006 Light grey RAL 9002 Note to designer: The essences of larch-wood, white, light grey, grey and black larch-wood are available only in brushed fi nish (relief-effect on surface), not in smooth finish. 8 11/2012

9 S T G E R M A I N NOTE TO DESIGNER Wardrobes with HINGED, SLIDING, COPLANAR SLIDING DOORS Drilling holes diagram for shelves and accessories Detail of shelf position by drilling hole Detail of the special drilling hole for double shirt tray cod. AGKR001 / AGKR002 / AGKR /2012 9

10 S T G E R M A I N NOTE TO DESIGNER Wardrobes with HINGED, SLIDING, COPLANAR SLIDING DOORS Examples of correct positioning of shelves and internal accessories Min. recommended height of compartment for shirts Min. recommended height of compartment for jackets Min. recommended height of compartment for long coat Min. recommended height of compartment for long clothes Example of internal accessories fitting, using fixed shelves in standard position 10 11/2012

11 S T G E R M A I N HINGED DOORS Handles - Typologies and positioning For tall units with double doors, handles only on right door SERIES AND DIMENSIONS POSITIONING MATERIAL DUEMILAOTTO 25 Handle with price increase. Recessed into the door thickness. Please note: NOT available in Policoat and Wood finishes Please note: Duemilaotto in polyester finish. It s available ONLY in white, cod The handle is made of a part in solid Corian joined in the door body, then cut out. Consequently the handle itself remains, as a matter of fact, in white Corian finish, different from the main fi nish on the door itself. Price increase L= 364 mm. Matt lacquered - Polyester (only white, cod. 003) JZMS X36 Handle with price increase. Recessed into the door thickness. 23 Please note: NOT available in Policoat Price increase L= 360 mm Matt lacquered - Wood - Polyester JZMS01 APRILE Handle with price increase Handle in aluminium extruded profi le. It s mounted aligned with door edge, thanks to a special cut-out. Finishes: brushed anodised stainless steel, matt white or matt black varnished. Price increase L= 360 mm Policoat - Matt lacquered - Wood - Polyester JZMS01 11/

12 S T G E R M A I N HINGED DOORS Handles - Typologies and positioning For tall units with double doors, handles only on right door SERIES AND DIMENSIONS POSITIONING MATERIAL APRILE 2 Handle with angled section, in extruded varnished aluminium Finishes: matt white - matt black. L= 370 mm mm. Vertical: ONLY L. 520 mm. Horizontal: the width is a little smaller than the door width (ex. door width: 597 mm > handle width: 520 mm) Horizontal version too TRAVE WK6 Handle bar in extruded aluminium. Finish: naturally anodised. L= 370 mm mm. Vertical: ONLY L. 520 mm. Horizontal: the width is a little smaller than the door width (ex. door width: 597 mm > handle width: 520 mm). WK Pocket-handle in printed varnished zama. Finishes: aluminium varnished - white - black Horizontal version too 12 11/2012

13 S T G E R M A I N HINGED DOORS Technical diagrams Sections The fi xed structural shelf could be moved during the assembly thanks to additional sleeves supplied with. The sleeves not used and mounted in standard position are, in this case, visible. Upon request the structural shelf could be provided in a position different from the standard one. - When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves. Plans /

14 S T G E R M A I N HINGED DOORS Minimum dimensions of the space where the niche wardrobe is fi tted WARDROBE COMPOSITION DIMENSIONS X = wardrobe width Y = wardrobe height Z = wardrobe depth = 600 mm Y Z X X1 Y1 Z1 MINIMUM DIMENSIONS OF THE NICHE X1 = X + 80 mm = min. niche width (with vertical ironware for niche use AGAB001, X1 = X + 20 mm). Y1 for wardrobe compositions with hinged door = Y + 20 mm = min. niche height Z1 = 600 mm = niche depth 14 11/2012

15 S T G E R M A I N HINGED DOORS Modularity Examples of wardrobe compositions - 25 mm. thick side panels included /

16 S T G E R M A I N SLIDING DOORS Handles - Typologies and positioning For door sliding to right side, handle on left - for sliding to left side, handle on right SERIES AND DIMENSIONS POSITIONING MATERIAL DUEMILAOTTO 25 Handle with price increase. Recessed into the door thickness. Please note: NOT available in Policoat and Wood finishes Please note: Duemilaotto in polyester finish. It s available ONLY in white, cod The handle is made of a part in solid Corian joined in the door body, then cut out. Consequently the handle itself remains, as a matter of fact, in white Corian fi nish, different from the main fi nish on the door itself. Price increase L= 364 mm. Matt lacquered - Polyester (only white, cod. 003) JZMS X36 Handle with price increase. Recessed into the door thickness. 23 Please note: NOT available in Policoat Price increase L= 360 mm Matt lacquered - Wood - Polyester JZMS01 APRILE Handle with price increase Handle in aluminium extruded profi le. It s mounted aligned with door edge, thanks to a special cut-out. Finishes: brushed anodised stainless steel, matt white or matt black varnished. Price increase L= 360 mm Policoat - Matt lacquered - Wood - Polyester JZMS /2012

17 S T G E R M A I N SLIDING DOORS Handles - Typologies and positioning For door sliding to right side, handle on left - for sliding to left side, handle on right SERIES AND DIMENSIONS POSITIONING MATERIAL APRILE 2 Handle with angled section, in extruded varnished aluminium Finishes: matt white - matt black. L= 520 mm. PLEASE NOTE! It can be used ONLY in compositions fitted with shelves or clothes rods. Any internal drawer units can be used ONLY when they are less wide than the useful compartment. TRAVE WK6 Handle bar in extruded aluminium. Finish: naturally anodised. WK Pocket-handle in printed varnished zama. Finishes: aluminium varnished - white - black L= 520 mm PLEASE NOTE! It can be used ONLY in compositions fitted with shelves or clothes rods. Any internal drawer units can be used ONLY when they are less wide than the useful compartment. 11/

18 S T G E R M A I N SLIDING DOORS Technical details Sections / / The fi xed structural shelf could be moved during the assembly thanks to additional sleeves supplied with. The sleeves not used and mounted in standard position are, in this case, visible. Upon request the structural shelf could be provided in a position different from the standard one. - When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves. Plants 18 11/2012

19 S T G E R M A I N SLIDING DOORS Minimum dimensions of the space where the niche wardrobe is fi tted WARDROBE COMPOSITION DIMENSIONS X = wardrobe composition width Y = wardrobe composition height Z = wardrobe composition depth = 642 mm Y Z X X1 Y1 Z1 MINIMUM DIMENSIONS OF THE NICHE X1 = X + 80 mm = min. niche width (with vertical ironware for niche use AGAB001, X1 = X + 20 mm). Y1 for wardrobe compositions with sliding door = Y + 80 mm = min. niche height Z1 = 642 mm = niche depth 11/

20 S T G E R M A I N SLIDING DOORS - Modularity Examples of wardrobe compositions - 25 mm. thick side panels included /2012

21 S T G E R M A I N COPLANAR SLIDING DOORS Handles - Typologies and positioning For door sliding to right side, handle on right - for sliding to left side, handle on left SERIES AND DIMENSIONS POSITIONING MATERIAL X36 Handle with price increase Recessed into the door thickness. 23 Please note: NOT available in Policoat. Price increase L= 360 mm Matt lacquered - Wood - Polyester JZMS01 APRILE 2 Handle with angled section, in extruded varnished aluminium Finishes: matt white - matt black. L=: 520 mm mm mm. Vertical: ONLY L. 520 mm. Horizontal: the width is quite smaller than the door width (ex. door width: 915 mm > handle width: 820 mm) TRAVE WK6 Handle bar in extruded aluminium. Finish: naturally anodised. L= 520 mm mm mm. Vertical: ONLY L. 520 mm. Horizontal: the width is quite smaller than the door width (ex. door width: 915 mm > handle width: 820 mm). 11/

22 S T G E R M A I N COPLANAR SLIDING DOORS Technical details Sections = overall dimensions of sliding mechanism The fi xed structural shelf could be moved during the assembly thanks to additional sleeves supplied with. The sleeves not used and mounted in standard position are, in this case, visible. Upon request the structural shelf could be provided in a position different from the standard one. - When vertical dividers are used the position of the structural shelf depends on the divider height itself and has the function of upper covering for the dividers themselves. Plants /2012

23 S T G E R M A I N COPLANAR SLIDING DOORS Minimum dimensions of the space where the niche wardrobe is fi tted WARDROBE COMPOSITION DIMENSIONS X = wardrobe composition width Y = wardrobe composition height Z = wardrobe composition depth = 605 mm Y Z X X1 Y1 Z1 MINIMUM DIMENSIONS OF THE NICHE X1 = X + 80 mm = min. niche width (with vertical ironware for niche use AGAB001, X1 = X + 20 mm). Y1 for wardrobe compositions with coplanar sliding door = Y + 80 mm = min. niche height Z1 = 605 mm. = niche depth 11/

24 S T G E R M A I N COPLANAR SLIDING DOORS - Modularity Examples of wardrobe compositions - 25 mm. thick side panels included * * * * * * : this tall unit cannot be fi tted with pull-out accessories. * 24 11/2012

25 S T G E R M A I N WALK-IN CLOSET Technical details 541 / / / / / / / Side elevations NOMINAL SIZES ROUNDED UP TO mm Plants / / / / / / / /

26 S T G E R M A I N WALK-IN CLOSET Minimum dimensions of the space where the niche wardrobe is fi tted X2 X1 Z1 B WALK-IN CLOSET COMPOSITION DIMENSIONS A = width 1 of walk-in closet composition B = width 2 of walk-in closet composition A Z = walk-in closet depth = 530 mm. Z MINIMUM DIMENSIONS OF THE NICHE X1 = A + 10 mm. = min. niche width X2 = B + 10 mm. = min. niche width Y1 = Y + 10 mm. = min. niche height Z1 = 530 mm. = min. niche depth 26 11/2012

27 S O L F E R I N O 11/

28 28 11/2012

29 S O L F E R I N O Technical features Modular wardrobe system, with high technology hidden within the system itself. Main and innovative feature is the absence of internal vertical structural elements: it s free from any space limitation as middle panels of traditional wardrobes. Solferino can be used in wall version, is a very fl exible and absolutely adaptable system. This wardrobe has an hidden structure in metal and aluminium, melamine internal panels and front panels in honeycomb board wood. Optionally you can have: - side panels or fillers in honeycomb board wood - upper covering panel in finish - internal drawer units in melamine and aluminium - shelves in melamine - pull-out trouser-holders in melamine and aluminium - clothes rods in aluminium. Any possible composition of modules with different heights should be ordered as combinations of single compositions: each composition with same height has always 2 terminal modules, the right and the left one. Each wardrobe module can be proposed in following version: without lighting, with upper LED lighting, with upper and lower LED lighting. - Available heights: 1586, 1936, 2286, 2636 mm (+ 14 mm when the optional upper covering panel is used). - terminal module widths: 468, 543*, 618, 693*, 918, 1218 mm - *The 543 (= mm) and 693 mm (= mm) terminal modules can offer very fl exible and custom composition widths. Please note that, in purely aesthetic terms, the front panels of these modules (543 or 693 mm) are wider than the standard ones (450 or 600 mm) and that the internal fi ttings for these consist of accessories for or multiple modules: so the distance between the accessory and the side panel is 75 mm. (see page 2.5). - middle module widths: 450, 600, 900, 1200 mm. - total depth: 670 mm. Supporting metal structure - Made of metal varnished in matt black. Vertical racks, with cut outs each 35 mm., for hanging and fixing of internal accessories. Connection bars - Made of black anodised extruded aluminium profi le. They are used as structural element for modules assembly, door hinges fi tting seat and seat for fi xing any LED lamps included in single module. Internal back panels - Made of 18 mm. wood particle panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Finishes: 1) white - 2) thermo-treated larch-wood. Accessories - DRAWER UNITS: Made of 16 and 10 mm. wood particle panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Front panels in aluminium, matt black varnished, equipped with handle. Drawer glides are totally extractable, with integrated soft closure device. TROUSER-HOLDERS: structure made of 16 and 10 mm. wood particle panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Runners are totally extractable, with integrated soft closure device. Bars for trouser in black anodised aluminium. CLOTHES RODS: in black anodised aluminium. SHELVES: Made of 10 mm. wood particle black panels, very low formaldehyde content (European Regulation Class EPF-S compliant), treated with high quality resin. Edges in ABS, in same colour. Finish: black. Front and side panels - In honeycomb board wood, 25/26 mm. thick: structure in solid wood + honeycomb. The doors have an inside adjustable anti-warping rod and exclusive black galvanized hinges, with 3 settings. the hinges are fi xed on aluminium upper and lower connection bars. 98 opening. Finishes: 1) Silcover - 2) Mat Plus - 3) Wood - 4) Wood Selection - 5) Polyester. Hinges - The front doors have exclusive black galvanized hinges, with 3 settings and soft closure device. They are fi xed on aluminium upper and lower connection bars. 98 opening. Upper covering panel - Made of 14 mm. MDF wood particle panels. When it is used please consider that the wardrobe is 14 mm. higher. Finishes: 1) Silcover - 2) Mat Plus - 3) Wood - 4) Wood Selection - 5) Polyester. Lighting - The modules with lighting are equipped with LED bars, low voltage (12 V), wide as the same module. These bars are to be fi xed on the specifi c housing on connection bars (lower or upper) of modules. They are supplied with transformer ( V / Hz) and presence sensor, with relative automatic switch. Light colour temperature: 3200 Kelvin. 11/

30 S O L F E R I N O Photo details 30 11/2012

31 S O L F E R I N O Technical details Upper covering panel in fi nish, 14 mm. thick (Optional) Metal structure, matt black varnished 18 mm. melamine upper internal panel Module connection upper bar in black anodised aluminium 18 mm. melamine side internal panel LED upper lighting (Optional) Vertical rack for hanging and fi xing of accessories (distance 35 mm) Kit of 18 mm. melamine back panel 18 mm. melamine lower internal panel lower LED lighting (Optional) Module connection lower bar in black anodised aluminium 26 mm. fi nished side panel (Optional) The fi llers in fi nish can be used alternatively. Finished hinged door, 25 mm. thick 11/

32 S O L F E R I N O Handles - Typologies and standard positioning. SERIES AND DIMENSIONS STANDARD POSITIONING MATERIAL DUEMILAOTTO 25 Handle with price increase. Recessed into the door thickness. L = 180 / Please note: Duemilaotto in polyester finish. It s available ONLY in white, cod The handle is made of a part in solid Corian joined in the door body, then cut out. Consequently the handle itself remains, as a matter of fact, in white Corian fi nish, different from the main fi nish on the door itself Price increase L= 180 mm mm. Silcover - Mat Plus - Wood (only graphite-grey oak, tobacco painted walnut, ebony eco-wood, black eco-wood) - Wood Selection (acacia) - Polyester (only white, cod. 003) JZMS01 X12 - X36 Handle with price increase Recessed into the door thickness. 23 Price increase L= 120 mm (X12) mm (X36) Silcover - Mat Plus - Wood - Wood Selection - Polyester JZMS01 APRILE Handle with price increase Handle in aluminium extruded profi le. It s mounted aligned with door edge, thanks to a special cut out. Finishes: brushed anodised stainless steel, matt white or matt black varnished. Please note: don t use opposing handles on tall units with double door, to avoid any type of interference between handles. In these cases the tall unit is supplied with only one handle on right door Price increase L= 360 mm Silcover - Mat Plus - Wood - Wood Selection - Polyester JZMS /2012

33 S O L F E R I N O Handles - Typologies and standard positioning. SERIES AND DIMENSIONS STANDARD POSITIONING MATERIAL APRILE / = 224 / 381 = 1000 Handle with angled section, in extruded varnished aluminium Finishes: matt white - matt black. L= 370 mm mm. Horizontal version too TRAVE WK6 WK Pocket-handle in printed varnished zama. Finishes: aluminium varnished - white - black. Please note: don t use opposing handles on tall units with double door, to avoid any type of interference between handles. In these cases the tall unit is supplied with only one handle on right door / 520 = 224 / 381 = 25 8 Handle bar in extruded aluminium. Finish: naturally anodised. L= 370 mm mm Horizontal version too 11/

34 S O L F E R I N O Colours and wood species (for exact colours please see physical samples) The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims. INTERNAL PANELS - (Melamine) 130 White 610 thermo-treated larch-wood SILCOVER - (matt lacquered, fi ne textured) 003 White 133 White (Lamicolor 754) 129 Magnolia 009 Cream 131 Sand (Lamicolor 1041) 134 Graphite grey (Lamicolor 1397) 119 Grey (Lamicolor 1366) 011 Green-Brown RAL Moka (Lamicolor 15) 118 Black (Lamicolor 202) 320 Orange 321 Mustard 322 Red 323 Blue 324 Green apple 325 Brick MAT PLUS (M+) - ("Soft touch" matt lacquered) 003 White 129 Magnolia 009 Cream 138 Slate 010 Red 137 Iron 005 Grey Ral Clay 011 Green-Brown RAL Yellow 013 Night-blue 012 Chocolate brown 110 Orange WOOD - (Veneer wood - Eco-wood reconstructed veneer wood) 049 Oak 071 Dark oak 076 Graphite grey oak 099 Ebony eco-wood 100 Black eco-wood 0 Rigatino walnut eco-wood 046 Tobacco painted walnut 045 Larch 028 White larch-wood 029 Light grey larch-wood 030 Grey larch-wood 031 Black larch-wood WOOD SELECTION - (Veneer wood) 052 Acacia wood thermotreated (brushed) POLYESTER - (Polished lacquer, polyester) 003 White 129 Magnolia 106 Sahara 004 Grey 027 Black 063 Sand 006 Light grey RAL 9002 Note to designer: The essences of larch-wood, white, light grey, grey and black larch-wood are available only in brushed fi nish (relief-effect on surface), not in smooth fi nish. The other wood species of the price list are not available in brushed fi nish /2012

35 S O L F E R I N O Technical diagrams Sections Plans Terminal modules Plans Middle modules Plans Back panels Without upper covering panel With upper covering panel Order example 11/

36 S O L F E R I N O Minimum dimensions of the space where the niche wardrobe is fi tted WARDROBE COMPOSITION DIMENSIONS X = wardrobe width Y = wardrobe height (PLEASE NOTE: wardrobe is 14 mm. higher when the fi nished upper covering panel, cod. SQAYAT01, is used - see example B). Y Z = wardrobe depth = 670 mm Z = 670 X Y2 Y2 X1 Y1 Z1 = 670 MINIMUM DIMENSIONS OF THE NICHE X1 = X + 40 mm = min. niche width EXAMPLE A without covering panel EXAMPLE B with covering panel, cod. SQAYAT01 Y1 for wardrobe compositions without covering panel (example A) = Y + 20 mm = min. niche height Y1 for wardrobe compositions with 14 mm. covering panel, cod. SQAYAT01 (example B) = Y + 60 mm = min. niche height Z1 = 670 mm = niche depth - When niches are less deeper please use fi nished side panels or fillers, wide as the composition. Y2 = min. 200 mm = min. height to allow possible adjustments of door anti-warping ties. If not realised the doors have to be taken down for adjustments / 1936 / 2286 / Y Y1 Y / 1936 / 2286 / Y Y2 Y /2012

37 S O L F E R I N O Modularity Examples of wardrobe compositions * = the 525 (actual size: 543 mm) and 675 mm (actual size: 693 mm) wide modules can be fitted with 450 and 600 mm. (or multiple) wide accessories. Any accessory fi tted in 525 or 675 mm. module has a distance of 75 mm. from the inner part of the side panel (450) (450) 918 (900) (900) 468 (450) (900) * (525) 468 (450) 2811 * (525) (900) * 543 (525) (900) 543 (525) 1536 * * (525) * 543 (525) * 543 (525) 618 (600) (1200) 618 (600) (600) 1218 (1200) (1200) * 693 (675) (1200) 918 (900) (900) * 693 (675) (1200) * 693 (675) * 693 (675) * 693 (675) (600) 918 (900) (450) 918 (900) (900) * 543 (525) (450) 918 (900) * 543 (525) * 543 (525) (900) * 693 (675) (675) * * 543 (525) * 543 (525) * 543 (525) * 543 (525) * 543 (525) * 543 (525) 1218 (1200) (1200) 1218 (1200) (1200) 918 (900) (900) 918 (900) (900) * 693 (675) (1200) * 543 (525) (900) * 693 (675) (1200) * 693 (675) * 693 (675) 1218 (1200) (1200) * 543 (525) (900) 618 (600) (1200) * 693 (675) (600) * 693 (675) * 693 (675) 75 Example of accessories fitted on 525 mm (543) and 675 mm (693) terminal modules. * 693 (600) * 693 (600) * 543 (525) * 543 (525) Accessori * Accessories 18 Accessoires Zubehör Accesorios 543 (525) (675) /

38 38 11/2012

39 A N T H E A 11/

40 40 11/2012

41 A N T H E A Technical features The door (hinged and folding doors) and wall partition system is composed of bearing structures with ceiling-mounted telescopic rail, wall-mounted jambs and corner jointing element. The doors and fi xed partition walls are available in 2 different versions: Frame + glass: frame made of extruded profi les In anodised aluminium, brushed stainless steel fi nish with 6 mm. fl oat glass, coated with safety membrane. Finished door: 55 mm. thick honeycomb board wood in following fi nishes 1) pre-treated rough door to be varnished, 2) Silcover, 3) Mat Plus, 4) Wood, 5) Polyester. Rails, jambs and jointing elements in anodised aluminium extruded profi les, brushed stainless steel fi nish. Supplied hardware: sliding carriages with silent bearings; rotating plates in 5 mm. brushed stainless steel profi le; fi xing and adjustment elements for fi xed partition walls in stainless steel and grey nylon. Door handles in anodised aluminium profi le, brushed stainless steel fi nish. 11/

42 A N T H E A Photo details 42 11/2012

43 A N T H E A Typologies (doors or fi xed partition walls) Beginning element Middle element Terminal element Element for corner joining 11/

44 A N T H E A Colours and wood species (for exact colours please see physical samples) The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims. SILCOVER - (matt lacquered, fi ne textured) 003 White 133 White (Lamicolor 754) 129 Magnolia 009 Cream 131 Sand (Lamicolor 1041) 134 Graphite grey (Lamicolor 1397) 119 Grey (Lamicolor 1366) 011 Green-Brown RAL Moka (Lamicolor 15) 118 Black (Lamicolor 202) 320 Orange 321 Mustard 322 Red 323 Blue 324 Green apple 325 Brick MAT PLUS (M+) - ( Soft touch matt lacquered) 003 White 129 Magnolia 009 Cream 138 Slate 010 Red 137 Iron 005 Grey Ral Clay 011 Green-Brown RAL Yellow 013 Night-blue 012 Chocolate brown 110 Orange WOOD - (Veneer wood - Eco-wood reconstructed veneer wood) 028 White larch-wood 029 Light grey larch-wood 030 Grey larch-wood 031 Black larch-wood 076 Graphite grey oak 100 Black eco-wood POLYESTER - (Polished lacquer, polyester) 003 White 129 Magnolia 004 Grey GLASS - 6 mm. thick - (used always with aluminium frame, stainless steel finish) Transparent Note to designer: The essences of larch-wood, white, light grey, grey and black larch-wood are available only in brushed fi nish (relief-effect on surface), not in smooth fi nish /2012

45 A N T H E A Technical details ceiling-mounted rail 2 telescopic rail 3 plug for telescopic rail 4 wall jamb 5 telescopic jamb for hinged door 6 jointing element for rail jamb 7 door rotation riser 8 rotation jointing element 9 covering element for folding door 10 brush strip for covering element 11 rotation arm for door 12 gasket 13 1 folding door 14 2 folding door 15 handle 16 rail track for moving doors 17 block for moving doors 18 housing of block on telescopic rail 19 hinges of folding doors 20 jamb for jointing element on folding door 21 jointing element 22 jamb for jointing element on fi xed door 23 covering element for fi xed door 24 fi xed door 25 upper plate for fi xed door 26 fl oor-mounted plate for fi xed door 27 telescopic jamb on fi xed door 28 fl oor-mounted plate for jointing element 11/

46 A N T H E A Front elevations and sections Fixed partition wall Folding door Hinged door 2-ways jointing element Wall-mounted jamb 2 Fixed partition wall / Door 3 width 4 ceiling-fi xed rail 5 Fixed partition wall / Door height 6 fl oor/ceiling distance 7 jamb for jointing element 8 jointing element 9 height of jamb for jointing element 10 jointing element height 46 11/2012

47 A N T H E A Sections min 92 max 107 min 300 max 1200 min 300 max 1200 min 300 max 1200 Fixed partition wall S1 N1 L1 Hinged door min 92 max 107 min 800 max 1200 min 92 max 107 V1 400 max 320 Folding door L1 min 92 max 107 min 800 max 1200 min 800 max 1200 min 92 max 107 max 320 S1 jamb N1 jointing element L1 width V1 changeable dimension 11/

48 A N T H E A Examples of wall-mounted solutions - Fixed jamb with telescopic jamb and covering element (for both) H. max 3000 mm. (single piece) - Adjustment: + / - 7,5 mm. STANDARD jamb REDUCED jamb 7,5 7,5 7,5 7, min 92,5 min 32,5 max 107,5 max 47, /2012

49 A N T H E A Technical details of wall-mounted solutions Built-in jamb for door Door jamb Wall-mounted, built-in pivot pin Wall-mounted pivot pin for door Wall-mounted fi xed door Wall-mounted, built-in reduced profi le Wall-mounted reduced profi le Wall-mounted solution, without jamb for fi xed door 11/

50 A N T H E A Technical details of jointing elements Module Module /2012

51 A N T H E A Technical details Section of frame door + glass with upper telescopic rail (recessed) min 2000 / max /

52 A N T H E A Adjustments Jamb adjustment ,5 7,5 7,5 7,5 Fixed door adjustment /2012

53 A N T H E A Design criteria To install: - measure the ceiling height at all points, considering the smallest taken measure (Y1, Y2, Y3, Y4, Y5, Y6, Y7, Y8, Y9). - measure the unit width at all points, considering the smallest taken measure (X1, X2, X3, X4). - ensure that ceiling can carry weight of sliding door (max. 60 kg. each). The ceiling and false ceiling have to be levelled for accurate installation and functioning of sliding doors. The fi xed partition walls are self-bearing and height-adjustable, supporting the line on fl oor and ceiling. Walls with frame + glass: H. min. 2000, max W. min. 300, max mm. Walls with fi nished door: H. min. 2000, max W. min. 300, max mm. Hinged doors with frame + glass: H. min. 2000, max W. min. 800, max mm. Finished hinged doors: H. min. 2000, max W. min. 800, max mm. Folding doors with frame + glass: H. min. 2000, max W. min. 1600, max mm. Finished folding doors: H. min. 2000, max W. min. 1600, max mm. 11/

54 A N T H E A Taking dimensions Measure always the minimal height (Y) and width (X) of rooms Ceiling height Y Y X Y X Ceiling height, when built-in rail is used Y Y X 54 11/2012

55 B O I S E R I E 11/

56 56 11/2012

57 B O I S E R I E Technical features The boiserie system consists of a bearing structure with wall-fi xed uprights and panels in different finishes, applied on the same uprights. The system is fitted with accessories, hanged with brackets. Structural uprights - Made of extruded aluminium profi les, naturally anodised fi nish. Height-and depth-adjustable thanks to feet and elements to compensate possible wall unevenness. Black dust protection brush. Covering panels and terminal fillers - Made of wood particle panels, 19 or 20 mm. thick, with low formaldehyde content E1 class, available in: Silcover, Mat Plus, Wood and polyester. Supplied hardware - Feet and depth-adjustable elements in anti-oxidation treated moulded zamak. Brackets for carcasses and shelves made of sheet and tubular steel painted with black epoxy dusts. Units - 3 available versions: 1) fi nished suspended units Wood with drawers or open-faced. Available with frontal panels in transparent glass. 2) Melamine suspended units with aluminium drawers. 3) melamine units arranged for installation on feet, castors or brackets. All drawers are fi tted with totally extractable glides and controlled closure device. Accessories - BASEMENTS: Made of wood particle panels, 15 or 16 mm. thick, with low formaldehyde content E1 class, available in Wood. CLOTHES RODS: in extruded anodised aluminium profi le, natural or black fi nish. FEET or CASTORS: stainless steel feet or castors kit (for drawer units). Shelves - available versions: 1) 60 mm. thick in finish: made of honeycomb board, Silcover, Mat Plus, Wood or polyester finish. 2) 60 mm. thick in fi nish with LED lamp: made of honeycomb board, Silcover, Mat Plus, Wood or polyester fi nish. 3) In anodised aluminium: 15 mm. thick extruded anodised aluminium profiles, natural finish. 4) In wood with sides: made of veneer wood particle panels, Wood finish. 5) 30 mm. thick in fi nish: made of wood particle panels with low formaldehyde content E1 class, Silcover, Mat Plus, Wood or polyester fi nish. 11/

58 B O I S E R I E Colours and wood species (for exact colours please see physical samples) The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims. SILCOVER - (matt lacquered, fi ne textured) 003 White 133 White (Lamicolor 754) 129 Magnolia 009 Cream 131 Sand (Lamicolor 1041) 134 Graphite grey (Lamicolor 1397) 119 Grey (Lamicolor 1366) 011 Green-Brown RAL Moka (Lamicolor 15) 118 Black (Lamicolor 202) 320 Orange 321 Mustard 322 Red 323 Blue 324 Green apple 325 Brick MAT PLUS (M+) - ( Soft touch matt lacquered) 003 White 129 Magnolia 009 Cream 138 Slate 010 Red 137 Iron 005 Grey Ral Clay 011 Green-Brown RAL Yellow 013 Night-blue 012 Chocolate brown 110 Orange WOOD - (Veneer wood - Eco-wood reconstructed veneer wood) 028 White larch-wood 029 Light grey larch-wood 030 Grey larch-wood 031 Black larch-wood 076 Graphite grey oak 100 Black eco-wood Note to designer: The essences of larch-wood, white, light grey, grey and black larch-wood are available only in brushed fi nish (relief-effect on surface), not in smooth finish /2012

59 B O I S E R I E Colours and wood species (for exact colours please see physical samples) The different materials and the different fi nishes in same colour (i.e. white), when matched together, may have inevitable differences in shade. This feature shall not be subject to claims. POLYESTER - (Polished lacquer, polyester) 003 White 129 Magnolia 106 Sahara 004 Grey 027 Black 063 Sand 006 Light grey RAL 9002 GLASS (with frame / aluminium frame) White-varnished Black-varnished Mirror 11/

60 B O I S E R I E Handles - Typologies and standard positioning SERIES AND DIMENSIONS STANDARD POSITIONING MATERIAL APRILE 2 Handle with angled section, in extruded varnished aluminium. Finishes: matt white - matt black. L=520 mm mm mm. The width is a little smaller than the drawer width (ex. drawer front width: 600 mm. > handle width: 520 mm.). TRAVE WK6 Handle bar in extruded aluminium. Finish: naturally anodised. L= 520 mm mm mm. The width is a little smaller than the drawer width (ex. drawer front width: 600 mm. > handle width: 520 mm.) /2012

61 B O I S E R I E Technical details Panels LED LED LED LED min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max / 900 / / 900 / / 900 / / 900 / 1200 LED Terminal panels LED Upright min 2000 / max 2500 min 2501/ max 2700 min 2000 / max 2500 min 2501/ max / 64 8 min 205 / max 594 min 205 / max 594 Shelves 600 / 900 / / 2100 / 2400 / 2700 / / 900 / 1200 / / 2100 / 2400 / 2700 / / 900 / / 900 / / 900 / Accessories for shelves 600 / 900 / / / 1200 Wood units 600 / 900 / / 900 / / 900 / / 900 / 1200 Basements 600 / 900 / /

62 B O I S E R I E How to use brackets and clothes rods with honeycomb board shelves /2012

63 B O I S E R I E Composition examples Linear wall composition with terminal fi ller (A) A A Niche corner wall composition with: Terminal fi ller (A) internal corner fi ller (B) external corner fi ller (C) B B A C A Niche linear wall composition with variable terminal fi llers (D) D D Niche corner wall composition with: terminal fi llers (A) Internal corner fi llers (B) B B A A 11/

64 64 11/2012

65 G R E E N E 11/

66 66 11/2012

67 G R E E N E Door system (Design Piero Lissoni ) Technical details Modular door system with fixed and sliding elements equipped with supporting and sliding beam. Doors Available typologies: fi xed - sliding. Frame in black anodised aluminium profi le. Surfaces in 6 mm thick tempered glass, available in 4 versions. Upper sliding carriages (only on sliding doors, 1 pair each single door). Total load-bearing capacity: 240 kg per pair. Black anodised aluminium handle (height 250 mm, provided only on doors WITH HANDLES). On sliding doors, guide pins to be fixed on the fl oor are provided. Kit for controlled movement of sliding doors (optional, to be ordered separately). Glass fi nishes: 1) Float transparent: 6 mm. thick, tempered. 2) Frosted extralight: 6 mm. thick, tempered, frosted on each side, without the typical green shades of the glass. 3) Smoky grey frosted: 6 mm thick, tempered, frosted on one side. 4) Transparent smoky grey: 6 mm. thick, tempered. 5) Frosted painted extralight: 6 mm thick, tempered, frosted on one side, without the typical green shades of the glass. 6) Special glass: Boffi can assess the possibility of offering glass types different from the ones listed. Please check before their feasibility. Beams Made of black anodised aluminium profi le; available in 5 different installation possibilities. 1) suspended installation> with 2-way rail. For lengths exceeding 3000 mm provide always a middle anti-warping rod, which must be fi xed to the ceiling (rod not provided) 2) wall installation> with 1-way rail. 3) ceiling installation> with 2-way rail. It can be installed with external ceiling fi xing or in proper built-in niche, made in the ceiling. 4) built-in installation for false ceiling > with 1-way or 2-way rail. 5) built-in wall installation for false ceiling > with 1-way or 2-way rail. 11/

68 G R E E N E Door system (Design Piero Lissoni ) Colours and wood species (for exact colours please see physical samples) ALUMINIUM (Anodised extruded aluminium profi le) Door frame / beams Black anodised Glass 6 mm thick, tempered - (used always with aluminium frame, in black anodised fi nish) Door panelling Transparent Frosted extralight Smoky grey frosted Transparent smoky grey Frosted, white painted extralight Frosted, dove-grey painted extralight Frosted, coffee painted extralight 68 11/2012

69 G R E E N E Door system (Design Piero Lissoni ) Measurement taking Measure always the minimum height (H1) and width (L1) of rooms Ceiling height H1 H1 L1 H1 L1 Ceiling height when built-in beam is used H1 L1 H1 H1 L1 11/

70 G R E E N E Door system (Design Piero Lissoni ) Handle Technical details Handle provided only on doors ordered WITH HANDLE. 45 Finish: black satin anodised aluminium Handle - Positioning A = Glass B = Door frame 1000 B A /2012

71 G R E E N E Door system (Design Piero Lissoni ) TYPE 1 2-WAY SUSPENDED BEAM Technical chart and calculation of heights MIN. 200 mm H1 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height * L 7 20 = For lengths exceeding 3000 mm it is necessary to * support the beam through a middle anti-warping rod, anchored to the ceiling (code NVAVA02GR) 30 SIZES CALCULATION H2 = H3 7 11/

72 G R E E N E Door system (Design Piero Lissoni ) TYPE 2 1-WAY WALL BEAM Technical chart and calculation of heights 51 ø H1 4 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION H2 = H /2012

73 G R E E N E Door system (Design Piero Lissoni ) TYPE 3 2-WAY CEILING BEAM Technical chart and calculation of heights ø 6 ø 6 MIN. 100 mm MIN. 100 mm H1 H1 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION H2 = H3 7 11/

74 G R E E N E Door system (Design Piero Lissoni ) TYPE 4 1-WAY BUILT-IN BEAM FOR FALSE CEILING Technical chart and calculation of heights H1 7 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION H2 = H /2012

75 G R E E N E Door system (Design Piero Lissoni ) TYPE 5 2-WAY BUILT-IN BEAM FOR FALSE CEILING Technical chart and calculation of heights H1 7 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION H2 = H /

76 G R E E N E Door system (Design Piero Lissoni ) TYPE 6 1-WAY BUILT-IN WALL BEAM FOR FALSE CEILING Technical chart and calculation of heights ø ø 6 ø H1 7 H2 H3 4 8, H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION 30 H2 = H /2012

77 G R E E N E Door system (Design Piero Lissoni ) TYPE 7 2-WAY BUILT-IN WALL BEAM FOR FALSE CEILING Technical chart and calculation of heights ø ø 6 ø H1 7 H2 H H1 = Ceiling height H2 = Door frame height H3 = Floor / beam height SIZES CALCULATION 30 H2 = H /

78 G R E E N E Door system (Design Piero Lissoni ) Calculation of beam and door width Closed doors 50 L L2 28 L1 Open doors L3 L L2 28 L1 Compatible beams: TYPE 2 L1 = Beam width L2 = Door width L3 = Doorway width L4 = Clear doorway width SIZES CALCULATION - 1 door L1 = L2 + L L2 = L L4 = L3-50 Closed doors 50 L L2 L2 28 L1 Open doors L3 50 L L2 L2 28 L1 Compatible beams: TYPE 2 L1 = Beam width L2 = Door width L3 = Doorway width L4 = Clear doorway width SIZES CALCULATION - 2 doors L1 = (L2 x 2) + L L2 = (L3 + 97) : 2 L4 = L /2012