hm connectors Type A Male connector
|
|
|
- Avice Pearson
- 7 years ago
- Views:
Transcription
1 Type A Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > cpci Hot-Swap (P1) cpci Telephony Spec (P4) Contact arrangement (see page 75) (see page 198) (see page 199) Coding keys (see page 68) Shroud (see page 66) Cross reference Pin lengths (see page 34) Note CompactPCI P1/P4 For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
2 Type A Female connector a b c d e a b c d e a b c d e Schirmblech lower shield Description Press-fi t technology Performance level II 110 Without shielding With shielding (cpci J1/J4) With shielding (cpci Telephony Spec) Lower shield Also in THTR (see page 202) (see page 203) Coding keys (see page 68) Note CompactPCI J1/J4 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 37
3 Type B25 Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 75) Cross reference Pin lengths (see page 34) (see page 200) (see page 201) Shroud (see page 66) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
4 Type B25 Female connector 24x2=48 2 max x2= x2= x2= a b c d e a b c d e a b c d e Schirmblech lower shield Description Press-fi t technology Performance level II 125 Without shielding With shielding Lower shield Also in THTR (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 39
5 Type B22 Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > cpci Telephony Spec (P5) cpci (P2/P5) cpci (P2/P5) Contact arrangement (see page 75) Cross reference Pin lengths (see page 34) (see page 200) (see page 201) Shroud (see page 66) Note CompactPCI P2/P5 For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
6 Type B22 Female connector Description Press-fi t technology Performance level II 110 Without shielding With shielding Lower shield Also in THTR (see page 202) (see page 203) Note CompactPCI J2/J5 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 41
7 Type B19 Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > cpci (P3) cpci (P3) Contact arrangement (see page 75) Cross reference Pin lengths (see page 34) Note VME J0 and cpci P3 For PCB thickness mm use part number xxx-05 (see page 200) (see page 201) Shroud (see page 66) 42 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
8 Type B19 Female connector a b c d e a b c d e Schirmblech lower shield a b c d e Description Press-fi t technology Performance level II 95 Without shielding With shielding Lower shield Also in THTR (see page 202) (see page 203) Note VME P0 and cpci J3 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 43
9 Type AB25 Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 76) Cross reference Pin lengths (see page 34) (see page 198) (see page 199) Shroud (see page 67) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
10 Type AB25 Female connector Description Press-fi t technology Performance level II 125 Without shielding With shielding Lower shield Also in THTR (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 45
11 Type AB22 Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 76) Cross reference Pin lengths (see page 34) (see page 198) (see page 199) Shroud (see page 67) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
12 Type AB22 Female connector Description Press-fi t technology Performance level II 110 Without shielding With shielding Also in THTR (see page 202) (see page 203) Note CompactPCI RJ5 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 47
13 Type AB19 Male connector 1 9 Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 76) Cross reference Pin lengths (see page 34) (see page 198) (see page 199) Shroud (see page 67) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
14 Type AB19 Female connector Description Press-fi t technology Performance level II 95 Without shielding With shielding Also in THTR (see page 202) (see page 203) Note CompactPCI RJ3 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 49
15 Type C Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 75) Cross reference Pin lengths (see page 34) (see page 200) (see page 201) Shroud (see page 66) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
16 Type C Female connector a b c d e Schirmblech lower shield Description Press-fi t technology Performance level II 55 Without shielding With shielding Lower shield Also in THTR (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 51
17 Type D Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 77) Cross reference Pin lengths (see page 34) (see page 198) (see page 199) Coding keys (see page 68) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
18 Type D Female connector Schirmblech lower shield Description Press-fi t technology Performance level II 176 Without shielding With shielding Lower shield (see page 202) (see page 203) Coding keys (see page 68) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 53
19 Type E Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 77) (see page 200) (see page 201) Cross reference Pin lengths (see page 34) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
20 Type E Female connector Schirmblech lower shield Description Press-fi t technology Performance level II 200 Without shielding With shielding Lower shield (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 55
21 Type DE Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 77) (see page 198) (see page 199) Cross reference Pin lengths (see page 34) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
22 Type DE Female connector Description Press-fi t technology Performance level II 200 Without shielding With shielding Lower shield (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 57
23 Type F Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > Contact arrangement (see page 77) (see page 200) (see page 201) Cross reference Pin lengths (see page 34) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
24 Type F Female connector Schirmblech lower shield Description Press-fi t technology Performance level II 88 Without shielding With shielding Lower shield (see page 202) (see page 203) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 59
25 Type L Male connector Description Press-fi t technology ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
26 Type L Female connector Description Press-fi t technology 6 Without shielding ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 61
27 Type M Male connector Contact arrangement Press-fi t technology Performance level II PCB thickness > 2.2 Without shielding With shielding Contact arrangement (see page 75) Coding keys (see page 68) Cross reference Pin lengths (see page 34) Note For PCB thickness mm use part number xxx ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
28 Type M Female connector 1 Description Press-fi t technology Performance level II 55+3 Without shielding With shielding Lower shield Coding keys (see page 68) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 63
29 Type N Male connector Contact arrangement Press-fi t technology Without shielding ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
30 Type N Female connector Description Press-fi t technology 3 Without shielding ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 65
31 Shroud PCB thickness X Y A B B22 B19 C < 2.4 mm 6.3 mm mm / / / / / mm 4.9 mm mm / / / / / mm 4.5 mm mm / / / / / mm 3.7 mm mm / / / / /1 > 4.8 mm 2.9 mm mm / / / / /1 Different designs and special types Insertion and removal tool (see page 205) 66 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
32 Shroud AB PCB thickness X Y AB25 AB22 (cpci RP 5) AB19 (cpci RP 3) < 2.4 mm 6.3 mm mm / / / mm 4.9 mm mm / / / mm 4.5 mm mm / / / mm 3.7 mm mm / / /1 > 4.8 mm 2.9 mm mm / / /1 Different designs and special types Insertion and removal tool (see page 205) ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 67
33 Coding keys Coding keys Male connector Coding key Code No. Color Female connector Coding key Code No. Color 1236 Nut brown RAL Nut brown RAL Strawberry red RAL 3018 Telephony Spec Strawberry red RAL 3018 Telephony Spec Blue lilac RAL Blue lilac RAL Brilliant blue RAL V cpci Brilliant blue RAL V cpci Reseda green RAL Reseda green RAL Cadmium yellow RAL V cpci Cadmium yellow RAL V cpci Slate gray RAL Slate gray RAL Steel blue RAL Steel blue RAL Pastel orange RAL Pastel orange RAL Ocher yellow RAL Ocher yellow RAL ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
34 CompactPCI connectors I Overview Overview of CompactPCI connectors Female connectors for daughter card Location Shielding Type A J1/rJ1/J4/rJ4 top Type B22 J2/J5 top Type AB22* rj2/rj5 top Type B19 J3 top Type AB19* rj3 top Type A for telephony J4 divided Type A for telephony (mirrored) rj4 divided * For rear transition card applications the AB connectors are used with AB shroud. All connectors are also available without shield. Male connectors for backplanes Position Contact arrangement * Type A Hot Swap P1 CB***BC Type A Hot Swap for Midplane P1 TP***PT Type B22 P2 CBBBBBC Type B22 AB compatible P2/P5 *PPPPP* Type B22 AB compatible P2/P5 *NNNNN* Type B22 AB compatible P2/P5 *SSSSS* Type B19 P3 CBBBBBC Type B19 AB compatible P3 *PPPPP* Type B19 AB compatible P3 *NNNNN* Type B19 AB compatible P3 *SSSSS* Type A for telephony P4 ****** Type A for telephony Midplane P4 ****** Type A P4 TPPPPPT Type A P4 TNNNNNT Type A P4 TSSSSST Type B22 for telephony P5 C*****C Type B22 for telephony, row Z not loaded P5 *****C Type B22 for telephony, row Z not loaded P5 ****** * Different pin lengths in this row/ not loaded. All connectors are also available with row Z unloaded/for other contact arrangements, please contact ept. ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 69
35 CompactPCI connectors I Overview Overview of CompactPCI connectors Coding keys Color Application Male connector backplane Brilliant blue 5 V P Male connector backplane Cadmium yellow 3.3 V P Male connector backplane Strawberry red Telephony P Female connector daughter card Brilliant blue 5 V J Female connector daughter card Cadmium yellow 3.3 V J Female connector daughter card Strawberry red Telephony J Shroud Position Height Base height PCB thickness Type A P1/P mm 6.3 mm < 2.4 mm Type A P1/P mm 4.9 mm mm Type A P1/P mm 4.5 mm mm Type A P1/P mm 3.7 mm mm Type A P1/P mm 2.9 mm > 4.8 mm Type AB22 P2/P mm 6.3 mm < 2.4 mm Type AB22 P2/P mm 4.9 mm mm Type AB22 P2/P mm 4.5 mm mm Type AB22 P2/P mm 3.7 mm mm Type AB22 P2/P mm 2.9 mm > 4.8 mm Type AB19 P mm 6.3 mm < 2.4 mm Type AB19 P mm 4.9 mm mm Type AB19 P mm 4.5 mm mm Type AB19 P mm 3.7 mm mm Type AB19 P mm 2.9 mm > 4.8 mm The height/bottom thickness of the shroud depends on the thickness of the backplane. 70 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
36 Notes ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 71
37 Notes 72 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
38 Notes ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 73
39 Notes 74 ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
40 Fax request Fax request (5+2) Company Phone First name Name Fax Address Signature Estimated quantity required: Number of required samples: Front view Module A z a b c d e f Rear mating zone Front mating zone Male type B 25 B 22 B 19 Please check Module B z a b c d e f Module C z a b c d e f Without rear mating zone With rear mating zone C B A M L K T S R Q P N Assembly reference: In order to achieve cost-effective assembly of the connectors, we recommend that the termination lengths are specified for each row. If only position 1 of a row is specified, the complete row will be equipped with this termination length. Exceptions can be entered at the respective position. Surface: Performance level II according to IEC ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 75
41 Fax request Fax request AB Company Phone First name Name Fax Address Signature Estimated quantity required: Number of required samples: Front view Module AB z a b c d e f Rear mating zone Front mating zone Male type Module AB z a b c d e f Module AB z a b c d e f Without rear mating zone With rear mating zone T S R C B A M L K Q P N Assembly reference: In order to achieve cost-effective assembly of the connectors, we recommend that the termination lengths are specified for each row. If only position 1 of a row is specified, the complete row will be equipped with this termination length. Exceptions can be entered at the respective position. Surface: Performance level II according to IEC ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I
42 Fax request Fax request (8+2) Company Phone First name Name Fax Address Signature Estimated quantity required: Number of required samples: Front view Module D Module F z z a a b c d e f g h b c d e f g h Rear mating zone Front mating zone Male type y y Module E Module DE z a b c d e f g h y z a b c d e f g h y Without rear mating zone With rear mating zone T S R Q P N M L K C B A Assembly reference: In order to achieve cost-effective assembly of the connectors, we recommend that the termination lengths are specified for each row. If only position 1 of a row is specified, the complete row will be equipped with this termination length. Exceptions can be entered at the respective position. Surface: Performance level II according to IEC ept GmbH I Phone +49 (0) / I Fax +49 (0) / I sales@ept.de I 77
Connectors according to IEC 61076-4-101
Definitions Connectors according to IEC 61076-4-101 The hardmetric connector system ept hm 2.0 was developed and manufactured according to the international standard IEC 61076-4-101. Thus the user can
Assembly tools. ept GmbH & Co. KG I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.
192 ssembly tools TC products 194 Hardmetric products 198 ccessories 204 DIN products 206 ccessories 212 PC/104, PC/104-Plus 214 VarPol connectors 214 Power terminals 216 Other tools 218 ept GmbH & Co.
3 U CompactPCI Backplane with 4 Slots
3 U CompactPCI Backplane with 4 Slots State of the art design for a wide range of applications Image for visualization only General Description This standard backplane is member of the ERNI backplane familiy
PC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
Connectors. product overview. Edition 3
Connectors product overview Edition 3 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
HARTING. Electronic Connectors
HARTING Electronic Connectors HARTING Electronic Connectors Global Innovative Technology The HARTING Technology Group has established a reputation for excellence and innovation with decades of experience
6 U CompactPCI Backplane with 8 Slots
6 U CompactPCI Backplane with 8 Slots State of the art design for a wide range of applications General Description This standard backplane is member of the ERNI backplane familiy for use in Compact PCI
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
Edition Perfect combination 9 Power supplies Electronic P Edition kaging www clear order..biz information in the catalogue
9 Power supplies Übersicht PROLINE Overview... 0 Power supplies Cabinets... 1 Wall mounted cases... 2 slimpower AC/DC switched-mode power supply 42 W, 3 HP Compact and low interference Accessories for
ODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F
Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
DOCUMENTATION PD16 CP3-SVE-M75DC-24
» User Guide «CPCI Power Supply Manual PRODUCT DOCUMENTATION PD16 CP3-SVE-M75DC-24 Reference ID: 24139 PD16, Rev. 01 February 28, 2011 If it s embedded, it s Kontron. PD16: CP3-SVE-M75DC-24 CPCI Power
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
PCB TERMINAL BLOCKS. Product Overview
PCB TERMINAL BLOCKS Product Overview AT A GLANCE: THE ENTIRE RANGE Variants: Pin pacing: Terminal blocks, terminal strips (double-, triple-, quadruple-deck terminal strips), disconnect terminal blocks
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
RAL 1002 Sand yellow. RAL 1007 Daffodil yellow. RAL 1015 Lighti vory. RAL 1020 Olive yellow. RAL 1027 Curry yellow. RAL 1035 Pearl Beige
RAL 1000 Green beige RAL 1001 Beige RAL 1002 Sand yellow RAL 1003 Signal yellow RAL 1004 Golden yellow RAL 1005 Honey yellow RAL 1006 Maize yellow RAL 1007 Daffodil yellow RAL 1011 Brown beige RAL 1012
ECR Shelf System Installation Guide Centralized Rack Mount Call Recording
Hardware & Installation Guide Algo Communication Products Ltd. Customer Support and Sales Tel: 1.877.884.2546 Fax: 604.437.5726 Email: sales@algosolutions.com support@algosolutions.com www.algosolutions.com
VOT-320. VOT-320V0xxL VOT-320V0xxH. Quick Installation Guide
VOT-320 VOT-320V0xxL VOT-320V0xxH en Quick Installation Guide VOT-320 Table of Contents en 3 Table of Contents 1 General information 4 2 Parts included 5 3 Unpacking 6 4 Installing and connecting 7 4.1
Green = 0,255,0 (Target Color for E.L. Gray Construction) CIELAB RGB Simulation Result for E.L. Gray Match (43,215,35) Equal Luminance Gray for Green
Red = 255,0,0 (Target Color for E.L. Gray Construction) CIELAB RGB Simulation Result for E.L. Gray Match (184,27,26) Equal Luminance Gray for Red = 255,0,0 (147,147,147) Mean of Observer Matches to Red=255
1978-83 Malibu 1978-87 Monte Carlo 1978-87 El Camino
Important facts about this kit. 1. The dash panel used in this picture is used by permission of Covan's Classic. 2. This kit requires some modification to your original under dash wiring harness. It is
Gold Solo Whistle Cable Kit
Gold Solo Whistle Cable Kit March 2014 (Ver. 1.201) Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging to Elmo Motion
Pantone Matching System Color Chart PMS Colors Used For Printing
Pantone Matching System Color Chart PMS Colors Used For Printing Use this guide to assist your color selection and specification process. This chart is a reference guide only. Pantone colors on computer
KEYLESS ENTRY UPGRADE SECURITY SYSTEM for 2004 TOYOTA HIGHLANDER
KEYLESS ENTRY UPGRADE SECURITY SYSTEM for 2004 TOYOTA HIGHLANDER DEALER SERVICE AND INSTALLATION MANUAL KIT NO. 00016-30915 Contents PARTS LIST... 2 PARTS ILLUSTRATIONS... 2 VEHICLE PREPARATION... 3 INSTALLING
Product Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
1. General Description
. General Description The is a Color Active Matrix with an integral Cold Cathode Fluorescent Lamp(CCFL) back light system. The matrix employs asi Thin Film Transistor as the active element. It is a transmissive
QR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
BUILDING INSTRUCTIONS
etap2hw 38 mm I2C to LCD Interface BUILDING INSTRUCTIONS October 2013 P. Verbruggen Rev 1.01 15-Oct-13 Page 1 Table of Contents Chapter 1 General Information 1.1 ESD Precautions 1.2 Further Supplies 1.3
LIFESTYLE SYSTEM CABLES
Lifestyle 3 II System Bose P/N 143630 shielded dual male plug, male plug to dual male plug, male plug. Audio input cable to music center. 30 Speaker Cables Bose P/N 130915 (BLK) P/N 140236 (WHT) 18 GA.
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
Universal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
Backplanes. AdvancedTCA Switched Fabric Architectures CompactPCI PXI VME VME64x VXI. Switches, Knobs & LEDs. System Platforms. Enclosures & Components
Backplanes AdvancedTCA Switched Fabric Architectures CompactPCI PXI VME VME64x VXI Enclosures & Components Backplanes System Platforms Cabinets Switches, Knobs & LEDs Products & Services ELMA ELECTRONIC
Processor. Installation Guide
Processor Installation Guide Land Instruments International Dronfield, S18 1DJ England Telephone: (01246) 417691 Facsimile: (01246) 410585 Email: infrared.sales@landinst.com Internet: www.landinst.com
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
PARTS & INSTALLATION INSTRUCTIONS MEYER SNOW PLOW LIGHTS
Form 1-696 R1 January, 2003 PARTS & INSTALLATION INSTRUCTIONS MEYER SNOW PLOW LIGHTS PARTS LIST ITEM PART NO. QTY. DESCRIPTION 07033 1 SNOW PLOW LIGHT CARTON 1 07034 1 Snow Plow Light, Pass. Side (No Hardware)
HARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
Enclosures & Components. PCB Accessories
Enclosures & Components PCB Accessories Card Locks and Card Handles Card Holders Middle Parts and Protective Covers Spacers and Mounting Plates Covering Caps and Mounting Brackets System Platforms Backplanes
Instruction Sheet ACS-101. General Description. Specifications. Amplified Broadband UHF Combiner-Splitter. Overall. Antenna Splitter.
ACS-101 Amplified Broadband UHF Combiner-Splitter General Description The ACS-101 (Antenna Combiner Splitter 10 to 1) is an amplified and filtered broadband splitter-combiner. It allows up to 10 base stations
INTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Key features: About this backplane:
Key features: Topology: Full Mesh VPX Backplane compliant to the VITA 46.0 core specification Backplane is supporting subsidiary specifications for protocols as: Serial Rapid IO (VITA 46.3), PCI Express
RTEX Cable 2015/10/1. Motor Business Unit Automotive & Industrial Systems Company Panasonic Corporation
RTEX Cable 2015/10/1 Motor Business Unit Automotive & Industrial Systems Company Panasonic Corporation Cable and Connector Page 2 2015/10/1 Rev. 5 Motor Business Unit, AIS Company The Kind of Ethernet
Elma Bustronic VPX Test Extender User Manual
Elma Bustronic VPX Test Extender User Manual Elma Bustronic used creative engineering to solve a major problem in developing the VPX Extender Board - the lack of a right angle receptacle for VPX in the
Technical Seminar H412
Technical Seminar H412 Nanosecond Impact on Hot-Swap Hank Herrmann - AMP Jack Kelly - Motorola Timothy R. Minnick - AMP 1 Nanosecond Discontinuities......are NOT pin bounce!!! 2 Session Outline of the
Part Name/Description Part Number Quantity. Power Cable 4000950-5 1
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Power Cable 4000950-5 1 Raven Harness Adapter Kit 4100525 1 Installation Instructions
User Manual. ATX12V / EPS12V Power Supply TG-I460R (460W+460W) TG-I550R (550W+550W) Switching Power Supply User Manual
ATX12V / EPS12V Power Supply TG-I460R (460W+460W) TG-I550R (550W+550W) User Manual Table of Contents 1 Introduction 2 General specification 3 Installation 4 Pin assignment & function of connectors 5 Drawing
Document number RS-PRD-00130 Revision 05 Date 20/10/2009 Page 1/30
Date 20/10/2009 Page 1/30 1. Purpose This document describes the field replacement of the footscan plate cable for these models: 2m hi-end plate SN 11/5/xxx 2m pro plate SN 7/5/xxx 0.5m 2003 hi-end plate
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
EH CONNECTOR. 1Certified LR20812 2 R75089 89. Disconnectable Crimp style connectors. Features
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Gold Cello Gold Cello Cable Kit
Gold Cello Gold Cello Cable Kit January 2014 (Ver. 1.101) Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging to Elmo
Edition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue
ratiopacpro Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 06800002 Subracks/ 19" chassis...
power rid B ge C o m p u t e r
power ridge B Computer powerbridge Computer Founded in 1993, Headquartered in Burgwedel / Hannover Distribution of computer boards and systems into telecom, industrial automation, traffic control, and
Product Information. HMC 6 Hybrid Motor Cable
Product Information HMC 6 Hybrid Motor Cable November 2014 HMC 6 Single-cable solution for servo drives Motors normally need two separate cables: One cable for the motor encoder One cable for the motor
LED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers
Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers Colocation Rack Secure, Separate Server Hosting and Housing in Data Centers An intelligent physical infrastructure is required
CHENBRO. RM31408 4-Port 6Gb/s Mini-SAS Backplane 80H10331404A0. User s Manual. Sep / 30 / 2010
CHENBRO RM31408 4-Port 6Gb/s Mini-SAS Backplane 80H10331404A0 Sep / 30 / 2010 1 Copyright Copyright 2010 Chenbro Micom Co., Ltd.. All rights reserved. Unless otherwise indicated, all materials in this
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
TABLE OF CONTENTS FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES... 4 3 DEFINITIONS... 4
TITLE SPECIFICATION FOR MASTER PADLOCKS, CYLINDER LOCKS AND KEYS REFERENCE REV DATE: JAN 2009 PAGE: 1 OF 26 TABLE OF CONTENTS Page FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES...
DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
Relay mounting systems
Page 1 Issued July 1998 Changed since April 1997 Data subject to change without notice RL COMBIFLEX RE 500 (SE 94832) (SE 970140) (SE 950216) Features Suitable for standard 19 rack, flush, semiflush, projection
ULTIMATE SNAP-N-SEAL
ULTIMATE SNAP-N-SEAL F Series Compression Connectors Thomas & Betts introduces the Ultimate Snap-N-Seal Compression Connector, the newest addition to the Snap-N-Seal system. Look for the classic design
List of materials (permanent storage)
0,75 x 1250 25µ Pol. RAL 1000 Green beige 0,75 x 1250 25µ Pol. RAL 1002 Sand yellow 0,75 x 1250 25µ Pol. RAL 1003 Signal yellow 0,75 x 1250 25µ Pol. RAL 1004 Golden yellow 0,75 x 1250 25µ Pol. RAL 1011
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
IMMS-CCC. IMMS-CCC Hardwire Central Interface. Installation Instructions
IMMS-CCC IMMS-CCC Hardwire Central Interface Installation Instructions TABLE OF CONTENTS... Choose a Location... 1 Connections... 2 Operations... 3 Software Configuration... 4 Troubleshooting... 5 Loopback
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
XUSL4E4BB091NS2 XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm
Characteristics XUSL type 4 - Slave2 - For body protection - 4 Beams, Hp = 910 mm Complementary Detection system Kit composition [EAA] effective aperture angle Emission Main Range of product Product or
XBee USB Adapter Board (#32400)
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
Category 6 Solutions. 4. Category 6 Solutions. 09/08 400836IN TrueNet Structured Cabling. Introduction... 4.2. Cable... 4.3. Patch Panels... 4.
Category 6 Solutions Introduction... 4.2 Cable... 4.3 Patch Panels... 4.4 Modules... 4.6 Patch Cords... 4.12 Outlets... 4.16 Faceplates...4.18 4. 1 Search Category 6 Solutions Introduction ADC KRONE s
1970-72 Chevelle. 1970-72 Chevelle. (500645) Gauge Cluster Kit Installation Instructions. (500645) Gauge Cluster Kit Installation Instructions
1970-72 Chevelle (500645) Gauge Cluster Kit Installation Instructions 1970-72 Chevelle (500645) Gauge Cluster Kit Installation Instructions STEP 1: There are 4 small gauges. This is a photo of the bare
2003/2004/2005 TOYOTA COROLLA
2003/2004/2005 TOYOTA COROLLA KEYLESS ENTRY UPGRADE SECURITY SYSTEM INSTALLATION INSTRUCTIONS KIT NO. 00016-30120 SPECIAL NOTE: Installation Sequences After TMS and Safety mandated preparatory steps have
T1 Backhaul Connectivity Solution All Products :: Application Note
Telect 1 RU Customer Interface Panel (CIP) Enables Demarcation, Remote Circuit Maintenance and Trouble Isolation at the Backhaul Node The Application: T1 Demarcation and Testing in Backhaul Environments
Table 1A. Ship Kit List & Quantity
Ship Kit Contents Items in this kit comprise the fiber optic cable plant components to be installed on ships for connection to the pier while the ship is in port. The interconnection boxes installed at
TFM GSMRoute BRI. Quick Installation Guide
TFM GSMRoute BRI Quick Installation Guide Connecting to ISDN Lines Basic Rate ISDN can be connected to the GSMRoute-BRI. Auto detects Point to Point or Point to Multipoint. Auto detects if ISDN circuit
HCR3.2/.. Chipcard reader HOTEL SOLUTION
s 6 332 HOTEL SOLUTION Chipcard reader HCR3.2/.. Chipcard reader for hotel room access control Reads access code on chipcard Transfers access code to room controller Built-in optical display of messages
I STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON
E Series. E Series. Category 6 and 5e. Features
E Series Category 6 and 5e CommScope, world leader in copper and fiber connectivity, offers the E Series product line as the ideal solution to all your infrastructure needs for safe and reliable data transmission.
OPERATING INSTRUCTIONS. VPS Pro Profiling Systems
OPERATING INSTRUCTIONS Profiling Systems EN Operating instructions This work is protected by copyright. All rights reserved by SICK AG. Copying of this work, whether in whole or in part, is only permissible
Trapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
DCS Input/Output Relay Card Series
Input/Output Relay Card Series I/O RELAY CARD (with loopback test function) 8N The 8N series I/O Relay Cards easily and quickly standardize and facilitate installation of the relay board. Loopback test
USER MANUAL MODEL 72-7480
PATTERN GENERATOR Introduction Through the use of portable HDMI pattern generator MODEL 72-7480, you are able to use 48 timings and 34 patterns, and operate it continuously for 6~8 hours after the battery
Subaru Reference. This reference contains the following information: connector pinouts. connector pinouts
Subject: Source: 1993 2010 Impreza, WRX, and Sti and 2002 07 Outback Sport ABS wiring diagrams, harness routing, and connector locations and pinouts Subaru service manuals This reference contains the following
id led 4" square housing FL44
id led 4" square housing FL44 LUMINAIRE MUST BE INSTALLED PRIOR TO DRYWALL CEILING. ALL GRID LUMINAIRES MUST BE SECURED TO STRUCTURE ABOVE. non-emergency optional - bar hangers key sold separately power
VOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
MAGNETOSTICTIVE TRANSDUCER
MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges from 50-4000
Data Sheet Fujitsu PRIMERGY BX400 S1 Blade Server
Data Sheet Fujitsu PRIMERGY BX400 S1 Blade Server Blade Made Easy Fujitsu PRIMERGY BX Blade Servers meet all the requirements of medium-sized companies as well as the branches and data centers of large
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories 2015 PRODUCT CATALOG 2ND EDITION LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories A technically and commercially
PAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
Depending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes: EXTERNAL DIAMETER 27.
ASSEMBLY 1 - EPS V2 POWER UNIT (SOLUTION 5) 1.1 - POSITIONING INSIDE THE SEAT TUBE WITH ELASTIC SUPPORT IN THE SEAT BRACKET TUBE Depending on which elastic support you have you can secure the V2 power
1 Technical Description Lokal-200PC
1 Technical Description Lokal-200PC 1.1 Overview laptop with in-built accummulator USB connection correlator box internal power supply laptop (if the device has been supplied by F.A.S.T.) BNC aerial connection