Adviesverkoopprijslijst incl. BTW
|
|
|
- Gerald Nicholas Rodgers
- 7 years ago
- Views:
Transcription
1 Adviesverkoopprijslijst incl. BTW 2015
2 Bb Trompetten STUDENT bore, nickel-silver mouthpipe, hand lapped nickel-silver slides, 1st slide saddle, adjustable 3rd slide ring, 4.75 seamless yellow brass bell L Gelakt 1.395, S Verzilverd 1.595,00 STUDENT bore, gold-brass mouthpipe, hand lapped nickel silver slides, 1st slide saddle, adjustable 3rd slide ring, 4.75 seamless gold-brass bell L Gelakt 1.395, S Verzilverd 1.595,00 SPECIAL bore, yellow-brass mouthpipe, hand lapped nickel-silver slides, 1st slide saddle, adjustable 3rd slide ring, 4.75 seamless gold-brass bell SP Verzilverd 1.775,00 CAPRI bore, nickel-silver mouthpipe, hand lapped nickel-silver slides, adjustable 3rd slide ring, 4.75 two-piece yellow-brass bell L Gelakt 1.750, TL Gelakt 1st slide trigger 1.875, S Verzilverd 1.975, TS Verzilverd 1st slide trigger 2.100,00 II bore, gold-brass mouthpipe, hand lapped gold-brass slides, 1st slide saddle, adjustable 3rd slide ring, 4.75 two-piece yellow-brass bell S Verzilverd 1.950, bore, nickel-silver mouthpipe, hand lapped nickel-silver slides, 1st slide saddle, adjustable 3rd slide ring, 4.75 two-piece yellow-brass bell L Gelakt 2.775, S Verzilverd 3.025, PROTEUS.460 bore, custom gold brass mouthpipe, hand lapped nickel-silver slides, fixed 1st & 3rd slide rings, #137 two-piece yellow-brass bell with special heat treatment S Verzilverd 3.150,00 2
3 Bb Trompetten bore, #125 yellow-brass mouthpipe, handlapped yellow-brass inside slides, square crook tuning slide, 1st slide saddle, 3rd slide ring, #137 hand hammered one-piece yellow-brass bell L Gelakt 3.750, S Verzilverd 3.975, bore, #125 yellow-brass mouthpipe, handlapped yellow-brass inside slides, square crook tuning slide, 1st slide saddle, 3rd slide ring, #172 hand hammered one-piece heavy gold-brass bell L Gelakt 3.750, S Verzilverd 3.975, bore, #125R reverse yellow-brass mouthpipe, handlapped yellow-brass inside slides, round crook tuning slide, 1st slide saddle, 3rd slide ring, #137 hand hammered one-piece yellow-brass bell L Gelakt 3.750, S Verzilverd 3.975,00 ARTIST.459 bore, custom yellow-brass mouthpipe, handlapped yellow-brass inside slides, 1st slide saddle, 3rd slide ring, #137 hand hammered one-piece yellow-brass bell with special heat treatment Verzilverd, 24k Gouden trim 4.625,00 ARTIST MIKE VAX.459 bore, custom yellow-brass mouthpipe, hand lapped yellow-brass inside slides, tuning slide venturi, 1st slide saddle, 3rd slide ring, #172 hand hammered one-piece lightweight gold-brass bell MV - L Gelakt 4.350, MV - S Verzilverd 4.600,00 GENESIS.462 bore, dual interchangeable leadpipe system, handlapped yellow-brass inside slides, 1st slide saddle, 3rd slide ring, flare, hand hammered one-piece yellow-brass bell with large throat, heavy plate bracing, oval crook tuning slide L Gelakt 5.050, S Verzilverd 5.050,00 3
4 C Trompetten bore, #125 yellow-brass mouthpipe, handlapped yellow-brass inside slides, square crook tuning slide, 1st slide saddle, 3rd slide ring, #29 hand hammered one-piece yellow-brass bell L Gelakt 3.750, S Verzilverd 3.975, bore, #125 yellow-brass mouthpipe, handlapped yellow-brass inside slides, square crook tuning slide, 1st slide saddle, 3rd slide ring, #29 hand hammered one-piece heavy gold-brass bell L Gelakt 3.750, S Verzilverd 3.975, bore, #125R reverse yellow-brass mouthpipe, handlapped yellow-brass inside slides, round crook tuning slide, 1st slide saddle, 3rd slide ring, #137 hand hammered one-piece yellow-brass bell L Gelakt 3.750, S Verzilverd 3.975,00 Bb / A Piccolo Trompetten bore, nickel-plated brass Bb & A tuning bits (cornet shank), 4 valves, hand lapped nickel-silver inside slides, short style, open bend yellow-brass bell L Gelakt 3.700, S Verzilverd 3.950, bore, nickel-plated brass Bb & A tuning bits (trumpet shank), 4 valves, 3rd slide ring, hand lapped yellow-brass inside slides, 4 two-piece copper bell L Gelakt 4.000, S Verzilverd 4.225,00 4
5 Speciale modellen HERITAGE M bore, yellow-brass mouthpipe, 4 3/4 seamless gold brass bell, chord rings. Inclusief koffer M L Gelakt 775, M S Verzilverd 1.000, Losse G-pomp Gelakt 100, Verzilverd 125,00 ELITE M2003E.459 bore, yellow-brass mouthpipe, #172 hand hammered yellow brass bell, chord rings. Inclusief koffer M2003E - L Gelakt 1.300, M2003E - S Verzilverd 1.525,00 HERALD bore, nickel silver mouthpipe, 4 3/4 detachable yellow brass bell, banner rings. Inclusief koffer L Gelakt 1.950, S Verzilverd 2.175,00 5
6 Bb Cornetten STUDENT bore, gold-brass mouthpipe, 1st slide saddle, adjustable 3rd slide ring, hand lapped nickel-silver inside slides, 4.75 seamless yellow-brass bell L Gelakt 1.395, S Verzilverd 1.595,00 STUDENT bore, gold-brass mouthpipe, 1st slide saddle, adjustable 3rd slide ring, hand lapped nickel-silver inside slides, 4.75 seamless gold-brass bell L Gelakt 1.395, S Verzilverd 1.595,00 CAPRI bore, gold-brass mouthpipe, 1st slide trigger, adjustable 3rd slide ring, hand lapped gold-brass inside slides, 4.75 yellow-brass bell L Gelakt 1.925, S Verzilverd 2.150,00 II bore, yellow-brass mouthpipe, 1st slide saddle, adjustable 3rd slide ring, hand lapped gold-brass inside slides, 4.75 yellow-brass bell S Verzilverd 1.950, bore, gold-brass mouthpipe, 1st slide saddle, adjustable 3rd slide ring, hand lapped nickel-silver inside slides, 4.75 two-piece yellow-brass bell L Gelakt 3.025, S Verzilverd 3.250, bore, gold-brass mouthpipe, 1st & 3rd slide trigger, hand lapped yellow-brass inside slides, 4.75 seamless copper bell L Gelakt 3.150, S Verzilverd 3.400,00 6
7 Eb Cornet bore, gold-brass mouthpipe, 1st slide saddle, 3rd slide ring, hand lapped nickel-silver inside slides, 4.75 seamless copper bell L Gelakt 3.375, S Verzilverd 3.600,00 C Cornet bore, gold-brass mouthpipe, 1st slide saddle, 3rd slide ring, hand lapped nickel-silver inside slides, 4.75 one-piece hand hammered yellow-brass bell L Gelakt 3.250, S Verzilverd 3.500,00 7
8 Bb Bugels CAPRI bore, nickel-plated yellow-brass mouthpipe, 1st slide trigger, adjustable 3rd slide ring, hand lapped nickel-silver inside slides, 6.5 yellow-brass bell L Gelakt 2.275, S Verzilverd 2.525, bore, nickel-plated yellow-brass mouthpipe, hand lapped nickel-silver inside slides, 6.5 yellow-brass bell L Gelakt 2.750, S Verzilverd 2.975,00 Optie 3rd Slide Trigger 175, bore, nickel-plated yellow-brass mouthpipe, 4th valve, hand lapped nickel-silver inside slides, 6.5 yellow-brass bell L Gelakt 3.100, S Verzilverd 3.350, bore, yellow-brass mouthpipe, 3rd slide trigger, hand lapped nickel-silver inside slides, 6.5 two-piece yellow-brass bell L Gelakt 3.550, S Verzilverd 3.775, GB.420 bore, yellow-brass mouthpipe, 3rd slide trigger, hand lapped nickel-silver inside slides, 6.5 two-piece gold-brass bell GB - L Gelakt 3.700, GB - S Verzilverd 3.950, bore, yellow-brass mouthpipe, 3rd slide trigger, hand lapped nickel-silver inside slides, 6.5 two-piece gold-brass bell. NEW L Gelakt 4.800,00 8
9 Bb Trombones STUDENT bore, yellow-brass round bow tuning slide, 8 yellow-brass bell with soldered rim, nickel-silver (chrome plated) inside slides, nickel-silver outside slides L Gelakt 1.295,00 STUDENT bore, yellow-brass round bow tuning slide, 8 gold-brass bell with soldered rim, nickel-silver (chrome plated) inside slides, nickel-silver outside slides L Gelakt 1.295, bore, yellow-brass tuning slide bow, 8 22 gauge yellow-brass bell with soldered rim, nickel-silver (chrome plated) inside slides, lightweight yellow-brass outside slides L Gelakt 3.050, Y.500/508 dual bore, yellow-brass bow tuning slide, 7,75 23 gauge yellow-brass bell with soldered rim, nickel-silver (chrome plated) inside slides, nickel silver outside slide with yellow-brass end crook. 3 interchangeable leadpipes Y - L Gelakt 3.350, R.500/508 dual bore, yellow-brass bow tuning slide, gauge red-brass bell with soldered rim, nickel-silver (chrome plated) inside slides, nickel silver outside slide with yellow-brass end crook. 3 interchangeable leadpipes R - L Gelakt 3.350,00 9
10 Bb / F Trombones 1036 F.525 bore, single conventional rotor, open wrap F attachment, 8 22 gauge yellow-brass bell with soldered rim, F - L Gelakt 3.875,00 CAPRI /.547 dual bore, single conventional rotor, closed wrap F attachment, 8 23 gauge red-brass bell with unsoldered rim, L Gelakt 2.475,00 II /.547 dual bore, single conventional rotor, open wrap F attachment, 8,5 22 gauge red-brass bell with unsoldered rim, L Gelakt 2.550,00 10
11 Bb / F Trombones CAPRI bore, conventional rotor, open wrap F attachment, 8 23 gauge yellow-brass bell with soldered rim, L Gelakt 2.725,00 II bore, conventional rotor, closed wrap F attachment, 8,5 22 gauge yellow-brass bell with soldered rim, L Gelakt 2.600, F.547 bore, single conventional rotor, open wrap F attachment, 8,5 22 gauge yellow-brass bell with soldered rim, F - L Gelakt 3.875, FR.547 bore, single conventional rotor, open wrap F attachment, 8,5 22 gauge red-brass bell with unsoldered rim, FR - L Gelakt 3.875,00 11
12 Bb / F Trombones 4047 DS.547 bore, Getzen PowerBore Rotor, open wrap F attachment, 8,5 yellow-brass bell with soldered rim, B Mandrel nickel-silver inside slides, yellow-brass outside slides with oversized yellow brass end crook. Special Features: DS yellow brass Edge Bracing* Asymmetrical Bracing on bell section for harmonic resonance* Vintage Mount Vernon fixed brass leadpipe DS Gelakt 6.275, IB IAN BOUSFIELD Bell Section: - 8,5 Rose brass bell with unsoldered rim; B Mandrel - Rose brass tuning slide, single radius taper - Yellow brass bell braces, nickel silver tuning slide braces - DS yellow brass Edge Bracing - Neckpipe: Longer construction with attention to balance in harmonic series - Patented harmonic brace: Singular harmonic pillar system design - Getzen PowerBore Rotor Slide Section: bore - Inner handslide: Solid nickel silver construction cork barrel assembly - Leadpipe: Yellow brass, open pipe designed to offset rotor and end crook compression - Outher slides: brass - Over sleeves: Nickel silver providing longer wear points. - End crook: Nickel silver crook with 3 width creates more intimate feel by bringing bell closer to the ear - Cross brace: Special material and dimensions reduce slide weight and aid resonance IB Gelakt 6.275, AF.547 bore with 3 interchangeable leadpipes, single Axial flow valve, open wrap F attachment, 8,5 22 gauge yellow-brass bell with soldered rim, nickel-silver inside slides, yellow-brass outside slides with nickel-silver end crook AF - L Gelakt 5.750, AFR.547 bore with 3 interchangeable leadpipes, single Axial flow valve, open wrap F attachment, 8,5 22 gauge red-brass bell with soldered rim, nickel-silver inside slides, yellow-brass outside slides with nickel-silver end crook AFR - L Gelakt 5.750,00 12
13 Bas Trombones 1052 FD.562 bore with 3 interchangeable leadpipes, 2 independent rotary valves, open wrap F/Gb/D attachment, 9,5 23 gauge yellow-brass bell with unsoldered rim, FD - L Gelakt 5.575, FDR.562 bore with 3 interchangeable leadpipes, 2 independent rotary valves, open wrap F/Gb/D attachment, 9,5 23 gauge red-brass bell with unsoldered rim, FDR - L Gelakt 5.575, FD.562 /.578 dual bore with 3 interchangeable leadpipes, 2 dependent rotary valves, open wrap F/D attachment, 9,5 23 gauge yellow-brass bell with soldered rim, nickel-silver inside slides, lightweight yellow-brass outside slides with nickel-silver end crook FD - L Gelakt 5.575, FDR.562 /.578 dual bore with 3 interchangeable leadpipes, 2 dependent rotary valves, open wrap F/D attachment, 9,5 23 gauge red-brass bell with soldered rim, nickel-silver inside slides, lightweight yellow-brass outside slides with nickel-silver end crook FDR - L Gelakt 5.575, AF.562 /.578 dual bore with 3 interchangeable leadpipes, dual Axial flow valves, open wrap F/Gb/D attachment, 9,5 22 gauge yellow-brass bell with soldered rim, AF - L Gelakt 8.775, AFR.562 /.578 dual bore with 3 interchangeable leadpipes, dual Axial flow valves, open wrap F/Gb/D attachment, 9,5 22 gauge red-brass bell with soldered rim, AFR - L Gelakt 8.775,00 13
14 Ventiel Trombone bore, yellow-brass tuning slide crook, 7 3/4 two piece yellow brass bell. Inclusief koffer L Gelakt 3.050, Losse schuif Gelakt 1.000,00 Bariton G bore, 3 valve, nickel silver pistons, 10 yellow brass bell. Inclusief koffer G L Gelakt 3.850, G S Verzilverd 4.425,00 14
BAN D ORCHE STR A NORGE. Gjelder fra 1. mai 2015. #YamahamusicNorway NO.YAMAHA.COM
NORGE Gjelder fra 1. mai 2015 BAN D ORCHE STR A NO.YAMAHA.COM Valid from 01.05.2015 #YamahamusicNorway This pricelist replaces all previous lists. Yamaha reserve the right to change prices and specifications
CHAPTER 1 GENERAL SETUP OF THE AVERAGE SHOP
CHAPTER 1 GENERAL SETUP OF THE AVERAGE SHOP When we speak of the necessary tools in the average one man shop, we must bear in mind that the small hand tools, which comprise the tool box layout of the average
Ted Brown Music Instrument Repair Price List 2015
Ted Brown Music Instrument Repair Price List 2015 Prices include a $2.00 Shop Supply Fee The minimum shop charge is $22.00 Estimates are $15.00 All prices subject to change without notice BRASS PLAYING
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.com (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans
8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
INSTALLATION INSTRUCTIONS P-TRAP SUPPLY KIT Model: RH-3016 These instructions are a guideline for a basic installation
INSTALLATION INSTRUCTIONS P-TRAP SUPPLY KIT Model: RH-3016 These instructions are a guideline for a basic installation Recommended Installation by a Professional Plumbing Contractor To find proper fit
PROEL PROEL PROEL TURBOSOUND L.T.D. PROEL S.P.A.
wind instruments Index Flutes Clarinets Saxophones Trumpets Flugelhorns French Horns Trombones Tuba Euphonium 4 6 8 12 14 15 16 18 19 Timeless Classic 01 12 L azienda Ida Maria Grassi iniziò a produrre
Drill String Design. The following topics will be discussed
Drill String Design The following topics will be discussed Kelly Drill pipe Drill collars Accessories; heavy wall drill pipe, jars, stabilizers, reamers, shock sub and bit sub Drill bits 1 Kelly Used to
The Physics of Music: Brass Instruments. James Bernhard
The Physics of Music: Brass Instruments James Bernhard As a first approximation, brass instruments can be modeled as closed cylindrical pipes, where closed means closed at one end, open at the other Here
2. AIRCONDITIONING AND REFRIGERATION
2. AIRCONDITIONING AND REFRIGERATION 1. INTRODUCTION Air Conditioning and Refrigeration is an important area where in lot of self-employment opportunities are available. Now a day there is hardly a house
Tools. Acid Brushes. Utility Brushes. Brushes For Cleaning Copper Fittings. Brushes For Cleaning Copper Tubing G113 10/06/11
10/06/11 Acid Brushes G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe
Carton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
Join the one-time chance to get ABM-Parts for factory costs in a direct sale!
SPECIAL SUMMER SALES FOR ALL Clearance / Overstock We need space in our warehouse for the new product collection. Join the one-time chance to get -Parts for factory costs in a direct sale! These bridges
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Model Marine Engine Requires No Castings
Model Marine Engine Requires No Castings EXHAUST PORTS No. 29 No. 31 CROSSHEAD-GUIDE BRACKET No. 29 (STEAM PORT) CYLINDER BLOCK R CYLINDER COVERS No.31 CYLINDER SUPPORT No.29 (STEAM PORT) VALVE LINER VENT,
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Vacuum chucking. MDAE Woodturning Center Course Number 95537001
Purpose of vacuum chucking Vacuum chucking MDAE Woodturning Center Course Number 95537001 Completing the foot of a vessel Re chucking a completed object Quick securing for additional steps (sanding) How
THE RANGE... supplied by S P O R T
THE RANGE... supplied by S P O R T Underlever Spring Powered Air Rifles HW97K Weihrauch s legendary spring powered Field Target rifle. Underlever action. A scope only Karbine air rifle. Fixed barrel precision,
Cabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
54mm X 54mm BORE AND STROKE
SECTION III TUNING 54mm X 54mm BORE AND STROKE WRITTEN BY MICHAEL SCUTT Short Stroke 54 x 54 Tuning information The following deals with building and tuning of a 54mm x 54mm Bantam motor and in particular,
TECHNICAL SERVICE MANUAL
TECHNICAL SERVICE MANUAL HEAVY-DUTY PUMPS SERIES 4195 AND 495 SIZES GG - AL SECTION TSM 144 PAGE 1 of 10 ISSUE D CONTENTS Introduction....................... 1 Safety Information.................... 2
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
Tonal Analysis of Different Materials for Trumpet Mouthpieces
Greg Formosa PHYS 199 POM Project Write-up Tonal Analysis of Different Materials for Trumpet Mouthpieces INTRODUCTION: Trumpets have been noted as one of the oldest instruments in the world, and ever since
Commercial Gas Cooking Thermostats
BJWA Series Commercial Gas Thermostat A223 Commercial Gas Cooking Thermostats Designed specifically for heavy-duty commercial oven and griddle applications Hi-Temp thermostat with steel bulb and capillary
TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER
TWO-WAY DIVERTER WITH THREE-WAY HAND SHOWER 1. BEFORE YOU BEGIN A. HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and
Merk/model Model jaar Art. nr. Omschrijving Prijs excl. BTW ASTON MARTIN. Prijs incl. BTW AUDI. Page 1 of 121
Merk/model Model jaar Art. nr. Omschrijving Prijs excl. BTW ASTON MARTIN VANTAGE 4.3 V8 COUPE 2005 and later Prijs incl. BTW Eindsierstuk Hi-Flow Sports Cats MSAM101 LH Hi-Flow Sports Catalyst Assembly
INSTRUMENTY DĘTE MTP www.silesiamusiccenter.pl www.mtp-music.de
INSTRUMENTY DĘTE MTP www.silesiamusiccenter.pl www.mtp-music.de 2013 1 Gesamtkatalog_2013.indd 1 3/9/2013 5:32:50 PM Spis treści JUNIOR Line MTP Bb slide trumpet mod. 1800 L 4 MTP Bb soprano saxophone,
WHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
AMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
BSA Goldstar Parts - Price List April 2016. 65-1137 Exhaust Lifter Cable 15.00. 65-1163 Exhaust Lifter Cable Holder S/S 9.00
Rocker Boxes 65-1137 Exhaust Lifter Cable 15.00 65-1163 Exhaust Lifter Cable Holder S/S 9.00 2-443 Exhaust Lifter Cable Holder Nut S/S 0.50 65-401 Exhaust Lifter Spindle Felt 2.00 65-387 Exhaust Lifter
Table of Contents. 3-5... Hastings Piston Rings. 6... Nomenclature. 7... Piston Ring Functions. 8... File Fit End Gap & Plastigage
Table of Contents 3-5... Hastings Piston Rings 6... Nomenclature 7... Piston Ring Functions 8... File Fit End Gap & Plastigage 9... Premium Ductile & Steel Rings by Diameter 19... Claimer Series by Diameter
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Table of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1
Table of contents BRAZED TURNING TOOLS Toolholders 2 Tips 6 Rods 8 9 1 ISO External holders General turning External Ordering Tip According to ISO243-1975 (DIN 4982-198) h b l 1 f 1 f 2 a p r ε γ 1) λ
BRASS OF THE ORCHESTRA WORKSHEET
BRASS OF THE ORCHESTRA WORKSHEET THE TRUMPET The history of the trumpet can be traced back to when people used wood, and animal horns to their voice. These primitive instruments were mostly, and were also
SECTION F HALOGEN LAMPHOLDERS HALOGEN LAMPHOLDERS. 1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104
1850 Wilson Avenue, Toronto, Ontario, Canada, M9M 1A1 Ph: 416-741-7336 Fax: 416-741-9104 SECTION F HALOGEN LAMPHOLDERS F1 HALOGEN LAMPHOLDERS Halogen Sockets Halogen Lamps F2 Bi-Pin Halogen G4/GZ4 Base
Flex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
Ariva Powerful Marketing Displays. Exhibit & Display Solutions
Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
Switches SWITCHES SWITCHES
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
Building a Small Horizontal Steam Engine
T Building a Small Horizontal Steam Engine HE small engine described in this article was built by the writer in his spare time about an hour a day for four months and drives the machinery in a small shop.
BRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
EQUIPMENT SET UP RECURVE BOW
EQUIPMENT SET UP RECURVE BOW Archery Australia Inc Coaching and Standards Committee Proudly Sponsored By EQUIPMENT SET UP RECURVE BOW It is important that equipment to be used must be set up correctly
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
Ceta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
MASTER CYLINDER. Section 2. Master Cylinder. Tandem Master Cylinder. Master Cylinder
MASTER CYLINDER Master Cylinder The master cylinder converts the motion of the brake pedal into hydraulic pressure. It consists of the reservoir tank, which contains the brake fluid; and the piston and
How to Make a Turkey Trumpet Call
How to Make a Turkey Trumpet Call By Marvin Hasenak Of Hasenak Game Calls mhasenak@yahoo.com Specail thanks to Marvin Dogcatcher on the boards for this excellent tutorial. Marvin is also a Master Predator
Taking Critical Measurements:
: Unfortunately today, the vast majority of appraisals seriously lack vital and critical measurements. It is caused by a combination of not knowing any better and out-and-out sheer laziness. Once again
GIBRALTAR 6000 Series Cymbal Stands
GIBRALTAR 6000 Series Cymbal Stands Gibraltar Upgrades 6000 Series Cymbal Stands with Swing Nut fast cymbal mounting system. Professional in features yet light enough in weight and mass for easy transport.
Metallized Particle Interconnect A simple solution for high-speed, high-bandwidth applications
Metallized Particle Interconnect A simple solution for high-speed, high-bandwidth applications The MPI Material Advantage Advantages: High-Density - Scalable Pitches down to 0,8 mm pitch possible - Scalable
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
MGA Alternator Conversion
MGA Alternator Conversion Installation Instructions For 1955 to 1962 MGA PART # 130-078 and #130-088 440 Rutherford St. P.O. Box 847 Goleta, CA 93117 1-800-667-7872 FAX 805-692-2525 www.mossmotors.com
Reliable Metal Bending
Reliable Metal Bending Since 1984 Welcome to Bendpro CNC Mandrel Bending Our commitment to you... P3 Accuracy Guaranteed Quick response quotes F.I.S. freight inclusive pricing Short lead-times 25+ years
Quick response concealed horizontal sidewall sprinkler
January 1, 2011 Sprinkler 63a 1. DESCRIPTION Viking Quick Response Concealed Horizontal Sidewall Sprinkler VK408 is a small solder link and lever spray sprinkler designed for installation on concealed
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
DUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS
ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
Welding and cutting torches - light version page 2. standard version page 4. 3-tube cutting torches and attachments (nozzle mix type) page 7
Welding and cutting torches - light version page 2 Welding and cutting torches - standard version page 4 3-tube cutting torches and attachments (nozzle mix type) page 7 Pressure regulators page 8 Safety
2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
The Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
American Band College of Sam Houston State University
Max McKee Executive Director (541) 840-4888 Scott McKee Managing Director (541) 778-4880 Paul Kassulke Director of Operations (541) 778-3161 Visit us @ www.bandworld.org Another ABC Presentation American
EPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
Self-aligning ball bearings
Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate
TEGAM Test Leads Work With Most Manufacturers Four-wire Ohmmeters
TEGAM Test Leads Work With Most Manufacturers Four-wire Ohmmeters INTRODUCTION Precision measurements require accurate, reliable connections all the way to the device under test. TEGAM manufactures precision
BROKEN VANE REPLACEMENT VT SERIES
BROKEN VANE REPLACEMENT VT SERIES VT 3.10 UP TO VT 3.40 VT 4.10 UP TO VT 4.40 VT VACUUM PUMP DT PRESSURE BLOWER Vacuum Pumps Compressors Becker Vacuum Pumps are leaders in their field in dependability
Complete units. Complete underfloor box for one Modul 45 socket and two data connection sockets. Complete service outlets
Complete underfloor box for one Modul 45 socket and two data connection sockets Screed height 105-165 mm In the field of complete service outlets, the GE 1 and GET 1 models are a universal, high-quality
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819
VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,
Where to order engine kits The displacer cylinder CONTINUED
By Harry Walton OCUS sunlight on this model engine, and it runs at full speed, fueled by Fthe biggest nuclear reactor in the solar system the sun. Power is ample to drive a midget water pump or spin a
Flexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
How Do I Replacing My Rear Brake Pads and Rotors?
How Do I Replacing My Rear Brake Pads and Rotors? WARNING! Always have the vehicle under inspection on level ground, in park with the emergency brake on. Always wear protective eyewear, gloves and necessary
FLO W C ONTROLS. OPTIO NS: Electroless Nickel Plated Stem Viton Seals BSPT & Metric O D Tube Connections Knurled A luminum Knob w ith Locknut
A ngle Flo w C ontrols A ngle Flo w Control valves are designed to provide accurate flo w control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant,
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
Sheet Metal Design: Beyond Bends and Flanges
11/30/2005-8:00 am - 9:30 am Room:Pelican 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Sheet Metal Design: Beyond Bends and Flanges Anthony B. Rodriguez - KETIV Technologies MA31-2
4 Installation Requirements
4 Installation Requirements 9 4.1 Code Reference The authority having jurisdiction should be referenced to determine what law, ordinance or code shall apply in the use of flexible duct. Ducts conforming
DSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
BUTTERFLY VALVES. An industry leader in underground and in-plant applications. STYLE 4500 3 24 STYLE 1450 30 54. Consult factory for sizes 60 120
An industry leader in underground and in-plant applications. BUTTERFLY VALVES STYLE 4500 3 24 STYLE 1450 30 54 Consult factory for sizes 60 120 C504 Class 150B & 250B M&H Valve is a division of McWane,
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
Rear Disc Kit. Front Caliper
Caliper and Wheel Kit 52-0600 1973-85 FX-FLH Chrome Rear Wheel/Brake Assembly includes chrome 16 x 3.0 Wheel Assembly, chrome caliper, chrome 51T sprocket with bolts, 10 or 11 1 /2 rear drill brake disc,
Ford Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
How to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
Degree Key System. Technical Manual
Degree Key System Technical Manual Copyright 03-04, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission
Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat
Document No. 155-068P25 TH 193-4 Powers Controls Free Energy Band TH 193 HC Heating/Cooling Room Thermostat 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 193 HC thermostats are proportional dual
DiscPlus DX195 and DX225 Air Disc Brakes
Revised 11-04 Technical Bulletin Revised 1 Technical 11-04 Bulletin DiscPlus DX195 and DX225 Air Disc Brakes Inspection, Installation and Diagnostics Air Disc Brake Inspection Intervals and Procedures
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
GEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
Compliant Terminal Technology Summary Test Report
Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4