Setup Soft PLC Technical handbook

Transcription

1

2 2 Setup Soft PLC Version V 1.1 Date Author Editing/Illustrations Frick Su/Pa Tools This documentation was created with Microsoft Word 2000 and Adobe Illustrator. Trade mark All product names or trademarks are properties of their respective owners. Copyright andron GmbH All rights reserved. Copying this document, giving it to others and the use or communication of the contents thereof without express authority, are forbidden. Offenders are liable for the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Validity There could be additional functions running in the control who are not mentioned in this documentation. It insists no claim for this functions, in case of a new delivery or a service case. All rights are reserved with respect to the content of this documentation and the availability to the product. Published by andron GmbH, Schlätterstraße 2, D Wasserburg/Bodensee Telefon +49 (0) 8382/9855-0, Fax +49 (0) 8382/ info@andron.de

3 3 Table of contents Revisions... 3 Target settings... 4 Register card Target Platform... 5 Register card Memory Layout... 5 Register card General... 6 Register card Network functionality... 6 Register card Visualization... 6 Library settings... 7 Task configuration... 8 Real Time Kernel settings... 9 Register card Diagnostic... 9 Register card Startup Register card Config Register card Ext. config Register card Access Register card IO Drivers Revisions Version Date Additions and changes Initials V First edition Fr/Su V Layout change to DIN A4 Pa

4 4 Setup Soft PLC Target settings To do the settings start the Soft PLC (CoDeSys) on the desktop for your control. On the register card resources you will find the entry target settings. A double click opens the menu of the target settings. Illustration: Target settings These settings are dependent from the project.

5 5 Register card Target Platform Change the entry configuration as shown on the picture below. If this is not possible, first of all the target system must be installed. Illustration: Target Platform Register card Memory Layout This settings are done automatically by the system and only have to be checked. Illustration: Memory Layout

6 6 Setup Soft PLC Register card General Illustration: General Register card Network functionality Illustration: Network functionality Register card Visualization Illustration: Visualization

7 7 Library settings To add a library select the desired and execute with a right click. To delete a selected library press the key Del. Illustration: Library settings Depending on the control type you have to use the correct library. Currently the following libraries are available: andron library andronic 2060 HMC library HMC 600

8 8 Setup Soft PLC Task configuration Illustration: Task configuration To ensure a cyclic utilization of the system a fixed time slice should be assigned. That means the Soft PLC tries, as selected here, update data each 20 ms.

9 9 Real Time Kernel settings Register card Diagnostic Illustration: Diagnostic This settings are independent from the project. The configuration settings are effective after restarting the Soft PLC.

10 10 Register card Startup Illustration: Startup

11 11 Register card Config Illustration: Config Register card Ext. config Illustration: Ext. config

12 12 Register card Access Illustration: Access Register card IO Drivers Illustration: IO Drivers