This is to attest that

Transcription

1 This is to attest that CANADIAN STANDARDS ASSOCIATION OPERATING AS CSA GROUP NO. 10, KEYAN ROAD, SCIENCE PARK LUO GANG DISTRICT, GUANGZHOU GUANGDONG PEOPLE S REPUBLIC OF CHINA Testing Laboratory TL-464 has met the requirements of the IAS Accreditation Criteria for Testing Laboratories (AC89), has demonstrated compliance with ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories, and has been accredited, commencing January 23, 2016, for the test methods listed in the approved scope of accreditation. (see laboratory s scope of accreditation for fields of testing and accredited test methods) This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See for current accreditation information, or contact IAS at C.P. Ramani, P.E., C.B.O President

2 IAS Accreditation Number Accredited Entity Address Contact Name Telephone Effective Date of Scope January 23, 2016 TL-464 Canadian Standards Association Operating As CSA Group No. 10, KeYan Road, Science Park Guangdong People s Republic of China Wayne Thomas Accreditation Manager FIELDS OF TESTING Plumbing (WaterSense) Plumbing Products Test methods referenced in EPA WaterSense Specifications for: - Showerheads - Tank Type High Efficiency Toilets - Flushing Urinals - High Efficiency Lavatory Faucets Commercial PRSV ASME/CSA Standards: A /CSA B45.2, A /CSA B45.1, A /CSA B125.1, A /CSA B125.2, A /CSA B125.6, A /CSA B45.1 and A /CSA B45.4, A /CSA B125.16, A /CSA B45.15, A /CSA B45.16; ASME Standards: A ; A ,A and A :2004 (R2010); ASSE Standards: ASSE1002 and ASSE 1014, ASSE_ , ASSE 1017, ASSE 1061, ASSE 1069, ASSE 1070; CSA Standards: B45.0, B45.3, B45.5, B45.11, B64.1.1,B125.3, B137 series, B181.1, B181.2; ANSI/IAPMO Standards: IAPMO/ANSI Z , IAPMO/ANSI Z124.6,IAPMO Standard IGC 172, IAPMO/ANSI Z1157, IAPMO/ANSI Z124.5; European Standards: EN31, EN33, EN997, EN1112, EN13310, EN14428, EN14527, EN B3:F40, EN200, EN274-1, EN 817, EN 1111; Australian and New Zealand Standards: AS/NSZ 1730, AS/NSZ 3662,AS 1756, AS1589, AS 2887, AS3498, AS3688, ATS , ATS ; ASTM Standards: D1785, D2241, D2466, D2661, D2665, F876, F877, F1807; NSF/ANSI Standards: 14; Page 2 of 15

3 Gas Controls ANSI Standard: ANSI Z21.20 and ANSI Z21.23; ANSI/CSA Standards: Z21.15/CSA 9.1, Z21.18/CSA 6.3, Z21.21/CSA 6.5, Z21.24/CSA 6.10, Z21.41/CSA 6.9, Z21.54/CSA 8.4, Z21.69/CSA 6.16, Z21.77/CSA 6.23, Z 21.78/CSA 6.20, Z21.80/CSA 6.22 and Z21.92/CSA 6.29; CSA Standard: 3.16; CAN/CGA Standards: CAN/CGA 8.1, CAN/CGA 8.3, CAN1-6.4 and CGA CR91-002; ASME Standards: B16.33 and B16.44; UL Standards: 21, 144 and 569; European Standards: EN88-1, EN 88-2, EN1106, EN 125, EN 126, EN257, EN12864, EN13611 and DS EN 161; Australian Standards: AS 2613, 4617, 4618, 4619, 4621, 4622, 4624, 4627, 4631, 4620/AG204 and 4629/AG 214; Gas Appliances AS/NZS 1869 ANSI Standards: Z21.1,Z and Z21.42; ANSI/CSA Standards: Z21.58/CSA 1.6, Z21.63/CSA 11.3, Z21.72/CSA 11.2, Z21.73/CSA 11.1, Z21.89/CSA 1.18, Z21.97/CSA 2.41, Z83.7/CSA 2.14, Z83.11/CSA 1.8 and Z83.26/CSA 2.37; CSA Standards: 2.09, 3.90, 4.98, 8.96 and 9.96; CAN Standards: CAN1-1.1, and CAN1-2.23; CGA Standard: IR 58; TIL Standard: TIL R-21; European Standards: EN , EN , EN 203-1, EN , EN , EN , EN , EN , EN , EN , EN , EN , EN , EN , EN 449, EN 484, EN 497, EN 498, EN 521,DS EN 437 and DS EN 14543; Australian Standards: AS 2658, AS 4551, AS 4553, AS 4554, AS 4555, AS 4557, AS 4558/AG 108, AS 4563 (limited to wind velocity less than 50 km/h), AS 4565, AS 4643 and, AS 5262/AG 404; SASO Standards: UAE.S GSO 1049 and UAE.S 1050; Page 3 of 15

4 Electrical Appliances and Accessories CSA Standards: C22.2 No (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA (300Vac/dc,30A), C22.2 No. 24, C22.2 No. 33, C22.2 No.36, C22.2 No.42 (except Clauses 8.11, 8.12, 8.13, 8.14, 8.22, 8.26, 8.27, 8.28, 8.29, 8.34), No.46 (except Clauses 6.16 and 6.17), No.164 (except Clause ), C22.2 No. 55 (except Clauses 6.10, 6.14, and 6.15), C22.2 No.61, C22.2 No.63, C22.2 No , C22.2 No. 66.1/66.2/66.3 (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc,30A]), C22.2 No.68, C22.2 No. 71.2, C22.2 No.72, C22.2 No. 73, C22.2 No. 77 (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A. No ability to perform Clause 5.8 Limited short-circuit test), C 22.2 No. 94, C22.2 No. 94.1, C22.2 No. 94.2, C22.2 No. 100 (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A), C 22.2 No. 108, C22.2 No.109, C22.2 No.113, C22.2 No.120, C22.2 No.139, C22.2 No.140.3, C22.2 No. 147, C22.2 No.153 (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc,30A]), C22.2 No.158 (except Clauses 6.10, and 6.13), C22.2 No (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA [300Vac/dc,30A]), C22.2 No.188 (except Clauses 7.10, 7.11, 7.14), C22.2 No 205, C22.2 No.223 (except Hot Flaming Oil), C22.2 No.243, C22.2 No. 247, CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , CAN/CSA-C22.2 No , C22.2 No and C22 No ; CSA SPE 1000, UL Standards: UL 50, UL 50E, UL 73, UL 82, UL 197, UL 207, UL 250, UL 325, UL 399, UL 429, UL 486C, UL 498 (except Section 55, 56, 57, 78, 92, 116, 123, 137H, 137I), UL 499, UL 507(except Par 67.2 and Par 92.1A), UL 561, UL 773A, UL 778, UL 817 (Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power: 9kVA (300Vac/dc,30A), UL 858 (except Par 66 and Par 67), UL 859, UL 873, UL 875 (except Par ), UL 982, UL 987, UL , UL , UL (Motors, rated max 500VAC 5HP 40 A, 300VDC 30 A. No ability to perform Clause 37 Limited short-circuit test), UL 1017, UL 1026, UL 1054 (except Section 21), UL 1059, UL 1081, UL 1082, UL 1278 (except Par 57), UL 1310 (except Hot Flaming Oil), UL 1659, Page 4 of 15

5 Electrical Appliances and Accessories (continued) UL 1977 (except Section 20), UL 2021 and UL / / [Max Rated Voltage: 300Vac/dc; Max Rated Current: 60A; Max Resistance Load Power:9kVA (300Vac/dc, 30A)], UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL , UL IEC standard: IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC , IEC IEEE Standard: IEEE 112 Test Procedure for Polyphase Induction Motors and Generators IEEE 114 Test Procedure for Single-Phase Induction Motors Household and Commercial Appliances NFPA 79 CSA Standards: C22.2 No. 150, C22.2 No. 167, C22.2 No. 168, C22.2 No. 187(except Ozone test), C22.2 No , CSA C22.2 No , CSA C22.2 No , CSA C22.2 No. 117, C22.2 No. 195, CSA C22.2 No. 236, CSA C22.2 No. 92; UL Standards: 621, 749, 763, 867(except Ozone test), 921, 1083, and 923; ANSI/UL Standards: ANSI/UL 471, ANSI/UL 474, ANSI/UL 484, ANSI/UL 1995, ANSI/UL , ANSI/UL , ANSI/UL and ANSI/UL 964 Lighting Products NSF/ANSI Standards: NSF/ANSI 7 CSA Standards: C22.2 No. 9.0 (except Clauses 13.32, 13.33, and 13.37), 12, 37, 74, 84, 141, 207, (except Clauses , 16.8, 16.11, and 16.12),250.4, 250.7, , 256 and 1993; TIL Standards: B-68, B-70, B-79, B-79A and B-81; Electronic Products Information Technology Equipment UL Standards: 48, 153, 234, 588 (except Section 89), 924, 962, 935, 1018 (except Section 53), 1029, Subject 1029A, 1574, 1598 (except Section , 16.8, 16.11, and 16.12), 1598B, 1598C, 1786, 1838, 1993, 2108, 2388 and 8750 CAN/CSA/UL/IEC/EN Standards: C22.2 No / UL / IEC / EN (For 2 nd edition, except Clauses , , , 4.2.8, , ) Page 5 of 15

6 Audio, Video and Similar Electronic Apparatus Electrical Equipment for Measurement, Control and Laboratory Use CAN/CSA/UL/IEC/EN Standards: / UL / IEC / EN (For 7 th edition, except Clauses 6, 7.2, 8.18, 8.22, 14.2, 14.4, 14.5,14.12, 16.1, 18; For 8 th edition, except Clauses 6, 7.2, 8.17, 8.21, 14.3, 14.5, 14.6,14.13, 16.1, 18) General Requirements: CSA/CAN Standard: CSA B-81, CAN/CSA C22.2 No (For 2 nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3 rd edition, except Clauses , , 11.6, 12, , 14.8) CSA C22.2 No CAN/CSA-C22.2 No (Except Clause ) CSA CAN/CSA-C22.2 NO (For 3 rd edition, except Clause14.101) CSA CAN/CSA-C22.2 NO (Except Clause ) CSA CAN/CSA-C22.2 NO (Except Clause 11.3) UL Standard: UL (For 2 nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3 rd edition, except Clauses , , 11.6, 12, , 14.8) UL UL (Except Clause ) UL (For 3 rd edition, except Clause14.101) UL (Except Clause ) UL / EN (Except Clause 11.3) Medical Electrical Equipment EN Standards: EN (For 2 nd edition, except Equipment of Measurement Category III or IV, and for outdoor use, and provided with high pressure fluid, radiation, or hazardous acoustic level. For 3 rd edition, except Clauses , , 11.6, 12, , 14.8) EN (Except Clause ) EN (For 3 rd edition, except Clause14.101) EN (Except Clause ) EN (Except Clause 11.3) CAN/CSA Standards: CAN/CSA-C22.2 No / CAN/CSA-C22.2 No M90 (R2006) (except clause 29, 30, 31, 33, 34, 36, 44.7, 44.8, 48, 59); CAN/CSA-C22.2 No (Edition 3.0) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); CAN/CSA-C22.2 No (Edition 3.1) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); CAN/CSA-C22.2 No :2008 (R2014); CAN/CSA-C22.2 No :2011 (except clause 12); CAN/CSA-C22.2 No (R2015) (except clause , 202); CAN/CSA-C22.2 No :2012 (except clause , 202); Page 6 of 15

7 Medical Electrical Equipment (continued) UL Standards: UL (except clause 29, 30, 31, 33, 34, 36, 44.7, 44.8, 48, 59); ANSI/AAMI Standards: ANSI/AAMI ES (Edition 3.0) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); ANSI/AAMI ES (Edition 3.1) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); ANSI/AAMI HA :2011 (except clause 12) IEC/EN Standards: IEC :1988+ A1: A2:1995 / EN :1990+A1: A2:1995 (Edition 2.0) (except clause 29, 30, 31, 33, 34, 36, 44.7, 44.8, 48, 59); IEC :2005 / EN :2006 (Edition 3.0) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); IEC :2005+A1 / EN :2006+A1 (Edition 3.1) (except Clause , 10.2, 11.2, 11.6, 11.7, 17); IEC :2006 (Edition 2.0); IEC :2010 (Edition 3.0); IEC 62366:2007; IEC :2006; IEC :2006+A1:2012; IEC/EN :2010 (except clause 12); IEC :1987+A1:2001 (except clause 36); IEC :2012 (except clause , 202); IEC :2009 (except clause , 202); IEC :2009+A1:2013 (except clause , 202); EN : 1997+A2:2009; EN : A1: 2009; EN : A1: 2009 (except clause ); EN : 2003; IEC 62304:2006 ISO Standards: ISO :2012 (except clause 11); ISO :2009 (except clause , 202); ASTM Standards: ASTM E ; ASTM E ; ASTM E (except clause 5.2, 5.4); ASTM E :2011 (except clause 5.3) Component Acceptance Service CSA COMPONENT ACCEPTANCE SERVICE NO. 5A Wire and Cable Testing CSA Standards: C22.2 No. 38 (except Clauses 4.10, 5.3, 5.13, , , 5.22, 5.23, 7), CSA C22.2 No. 48, C22.2 No. 49 (except Clauses , , , , , 5.2.1, 5.2.9), CSA C22.2 No. 51, CSA C22.2 No. 75, CSA C22.2 No. 127(except Clauses , , , 6.3.3, 6.3.4, , , , ), CSA C22.2 No. 130, CSA C22.2 No. 131, CSA C22.2 No. 210 (except Clauses 11.16, 11.17), CSA C22.2 No. 214 (except Clause 7.13), and CSA C22.2 No. 271 (except Clauses 6.3, 6.13, 6.20); CSA C , CSA C22.2 No , CSA C22.2 No.197-M1983 UL Standards: 44, 62, 83, 244, 1441, 444, 515, 758 (except Clauses 25, 28, 32, 33, and 36), 1673; CSA Energy Efficiency Verification (EEV) Program ANSI/IEEE 515 and ANSI/IEEE CSA Standards: C300, C381.1, C390, C747, C749, C815, C827, and C62301 Page 7 of 15

8 ENERGY STAR Program Requirements Lighting (except Electromagnetic and Radio Frequency Interference, Air Tight for Restricted Air Flow, and Mercury Content): ANSI C , Specifications for Performance of Self-Ballasted Compact Fluorescent Lamps; ANSI C American National Standard for Fluorescent Lamps Guide for Electrical Measurements; ANSI C Electric Lamps Specifications for the Chromaticity; ANSI C Chromaticity of Solid State Lighting Products; ANSI C Specification of Chromaticity of Solid State Lighting Products; ANSI C Electric Lamps, High Intensity Discharge, Methods of Measuring Characteristics; ANSI/NEMA C Method of Measurement of Fluorescent Lamp Ballasts; ANSI C Ballast For High Intensity Discharge Lamps - Methods of Measurement; ANSI C High-Frequency Fluorescent Lamp Ballasts; ANSI C Harmonic Emission Limits Related Power Quality Requirements for Lighting; ANSI/IEEE C (01-May-1991), Recommended Practice for Surge Voltages in Low Voltage AC Power Circuits, Category A, 7 Strikes; ASTM G , Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials; CIE Method of Measuring and Specifying Color Rendering of Light Sources CIE Colormetry Standard; CIE The Measurement of Luminous Flux; CIE Measurement of LEDs; CIE Measurement of LEDs; IEEE P1789 IEEE Recommending Practices for Modulating Current in High Brightness LEDs for Mitigating Health Risks to Viewers; CSA Standard CSA-22.2 No.37-M1989 (R2004) Christmas Tree and Other Decorative Lighting Outfits; IES Standards: IES LM Approved Method for the Electrical and Photometric Measurements of Fluorescent Lamps; IES LM-9-09 Electric and Photometric Measurements of Fluorescent Lamps; IES LM Photometric Testing of Outdoor Fluorescent Luminaires; IES LM Photometric Testing of Outdoor Fluorescent Luminaires; IES LM IESNA Technical Memorandum on Light Emitting Diode (LED) Sources and Systems; IES LM Practical Guide to Colorimetry of Light Sources; IES LM Photometric Testing of Reflector-Type Lamps; Page 8 of 15

9 ENERGY STAR Program Requirements (continued) IES Standards: IES LM Photometric Testing of Roadway Luminaires Using Incandescent Filament and High Intensity Discharge (HID) Lamps; IES LM Photometric Testing of Floodlights Using Incandescent Filament or Discharge Lamps; IES LM Approved Method for Life Performance Testing of Fluorescent Lamps; IES LM Life Testing of Fluorescent Lamps; IES LM Approved Method for Photometric Testing of Indoor Fluorescent Luminaries; IES LM Approved Method for Photometric Testing of Indoor Fluorescent Luminaries; IES LM Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps; IES LM Approved Method for Life Testing of High Intensity Discharge (HID) Lamps; IES LM Life Testing of Incandescent Filament Lamps; IES LM High Intensity Discharge Lamps-Total Flux Measurements; IES LM Guide to Lamp Seasoning; IES LM Guide to Spectroradiometric Measurements; IES LM IES Approved Method for Spectroradiometric Measurement Methods for Light Sources; IES LM Guide to Spectroradiometric Measurements; IES LM Approved Method for Life Testing of Single-Ended Compact Fluorescent Lamps; IES LM Life Testing of Compact Fluorescent Lamps; IES LM Life Testing of Compact Fluorescent Lamps; IES LM Electrical and Photometric Measurements of Single- Ended Compact Fluorescent Lamps; IES LM Electrical and Photometric Measurements of Single- Ended Compact Fluorescent Lamps; IES LM Electrical and Photometric Measurements of Single- Ended Compact Fluorescent Lamps; IES LM Approved Method for Electrical and Photometric Measurements of Solid- State Lighting Products, Sections 9, 10, 11 and 12; IES LM , Characterization of LED Light Engines and LED Lamps for Electrical and Photometric Properties and a Function of Temperature; IES LM Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires; IES TM IESNA Technical Memorandum on Light Emitting Diode (LED) Sources and Systems; IES TM Projecting Long-Term Lumen Maintenance of LED Packages; UL 153 Portable Luminaires; UL 588 Standard for Seasonal and Holiday Decorative Products; UL 1993 Self-Ballasted Lamps and Lamp Adapters; Page 9 of 15

10 ENERGY STAR Program Requirements (continued) ENERGY STAR Online CBCP, Tool for Calculating Minimum Center Beam Intensity; ENERGY STAR Elevated Temperature Life Test (ETLT); ENERGY STAR Ambient Temperature Life Test (ATLT); ENERGY STAR Elevated Temperature Light Output Ratio; ENERGY STAR Start Time Test; ENERGY STAR Run Up Time Test; ENERGY STAR Program Requirements for Decorative Light Strings Test Procedure and Eligibility Criteria Version 1.5 Appendix A US DOE 10 CFR 429 Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment (restricted to Compact Fluorescent Lamps); US DOE 10 CFR 430 Appendix W to Subpart B Energy Conservation Program for Consumer Products (Restricted to Compact Fluorescent Lamps); Battery Chargers ENERGY STAR Program Requirements Product Specification for Battery Charging Systems Version 1.1 IEC Standard : Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 1: Nickel-cadmium. Ed January 2006 IEC Standard : Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal hydride. Ed April 2003 IEC Standard 61960: Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications. Ed December 2003 Televisions ENERGY STAR Program Requirements for Televisions Version 6.1 IEC 62301, Ed 2.0: Household Electrical Appliances Measurement of Standby Power CEA-2037: Determination of Television Average Power Consumption (December 2009). CEA: Procedure for DAM Testing; Audio/Videos Method for Audio/Video, ENERGY STAR Program Requirements Product Specification for Audio/Video, Version 3.0; IEC 62087, Ed 3.0: Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment; Computers ENERGY STAR Program Requirements Product Specification for Computers Version 6.1. ENERGY STAR Computer Test Method, ENERGY STAR Program Requirements Product Specification for Computers, Version6.1, page 11; EPRI Generalized Test Protocol for Calculating the Energy Efficiency of Internal AC-DC and DC-DC Power Supplies (for products that have internal, multi-output, or single output with integral cooling power supplies) IEC 62301, Ed.2.0: Household Electrical Appliances - Measurement of Standby Power; Page 10 of 15

11 ENERGY STAR Program Requirements (continued) Energy Efficiency Displays/Monitors ENERGY STAR Program Requirements Product Specification for Displays Version 6.0; Imaging Equipment ENERGY STAR Program Requirements Eligibility Criteria Version 2.0; Residential Refrigerators and Freezers ENERGY STAR Program Requirements Product Specification for Residential Refrigerators and Freezers Eligibility Criteria Version 5.0 and 10 CFR 430, Subpart B, Appendix A, A1, B, B1; Commercial Refrigerators and Freezers ENERGY STAR Program Requirements Product Specification for Commercial Refrigerators and Freezers Eligibility Criteria Version 3.0; Water Coolers ENERGY STAR Program Requirements Product Specification for Water Coolers Eligibility Criteria Version 2.0; Water Heater Energy Star Program Requirements, Product Specification for Residential Water Heater Dehumidifiers ENERGY STAR Program Requirements Product Specification for Dehumidifiers Eligibility Criteria Version 3.0; Air Source Heat Pump and Central Air-conditioner Equipment EPA ENERGY STAR Program Requirements Product Specification for Air Source Heat Pump and Central Air-conditioner Equipment Eligibility Criteria, Version 4.1 CSA C358 - Energy Consumption Test Methods for Household Electric Ranges; CSA C370 - Cooling Performance of Portable Air-conditioners; CSA C390 - Test methods, marking requirements, and energy efficiency levels for three-phase induction motors CSA C747 - Energy efficiency test methods for small motors CSA C656 - Performance Standard for Split-System And Single- Package Central Air-conditioners and Heat Pumps; CSA C744 - Standard For Packaged Terminal Air-conditioners and Heat Pumps; AHRI 1200-Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets; ANSI/AHRI 210/240-Performance Rating of Unitary Air-conditioning & Air-Source Heat Pump Equipment; ANSI/ASHRAE 37-Methods of Testing for Rating Unitary Air-conditioning and Heat Pump Equipment; Page 11 of 15

12 Energy Efficiency (continued) ANSI/ASHRAE 72 - Method of Testing Commercial Refrigerators and Freezers 10CFR-Appendix A to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Electric Refrigerators and Electric Refrigerator-Freezers; 10CFR-Appendix B to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Freezers; 10CFR-Appendix E to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Water Heaters 10CFR-Appendix M to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Central Air-conditioners and Heat Pumps; 10CFR-Appendix X to Subpart B of Part 430 Uniform Test Method for Measuring the Energy Consumption of Dehumidifiers; 10CFR-Appendix A to Subpart C of Part 431 Uniform Test Method for the Measurement of Energy Consumption of Commercial Refrigerators, Freezers, and Refrigerator-Freezers 10CFR-Appendix B to Subpart C of Part 431 Amended Uniform Test Method for the Measurement of Energy Consumption of Commercial Refrigerators, Freezers, and Refrigerator-Freezers DOE document 10 CFR Part 431 Subpart B - Energy Efficiency Program for Certain Commercial and Industrial Equipment - Electric Motors DOE document 10 CFR Part 431 Subpart X - Energy Efficiency Program for Certain Commercial and Industrial Equipment - Small Electric Motors SASO 2663-Energy Labelling and Minimum Energy Performance Requirements for Air-conditioners; SASO 2664-Energy Performance and Capacity of Household Refrigerators, Refrigerator-Freezers, and Freezers; IEC Household refrigerating appliances Characteristics and test methods Part 1: General requirements IEC Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements IEC Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume Page 12 of 15

13 Energy Efficiency (continued) ISO 5151 Non-ducted air conditioners and heat pumps - Testing and rating for performance EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 2: Test conditions EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods EN Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 4: Operating requirements, marking and instructions EN Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance RTE INEN 009 Household Appliances For Refrigeration RTE INEN 2206 Household Refrigerating Appliances with or Without Frost. Refrigerators With or Without Low-Temperatures Compartment. Specifications And Inspection RTE INEN 2297 Frozen Food Storage Cabinets and Household Food Freezers. Specifications And Inspection RTE INEN 035 Energy Efficiency In Household Refrigerating Appliances. Energy Consumption, Test Methods And Labeling Report. RTE INEN 072 Energy Efficiency for Non-ducted Air Conditioners COVENIN 178 Refrigerators and Freezers Requirements and Test Methods COVENIN 3193 Refrigerators, Refrigerators - Freezers Energy Consumption Test Methods and Capacity Measurements COVENIN 3235 Refrigerators, Refrigerators Freezers, and Freezers. Labeling and Energy Consumption report COVENIN 1299 Window Type Air Conditioners - Requirements COVENIN 3537 Window Type Air Conditioners Test Method Page 13 of 15

14 Energy Efficiency (continued) COVENIN 3560 Window Type Air Conditioners Labeling and Energy Efficiency Report COVENIN 3538 Air Conditioners Cooling Capacity Test Methods, Energy Consumption and Energy Efficiency. UNIT 1138 Energy Efficiency for Household Electrical Refrigerators - Specification and Labeling. UNIT 1170 Energy Efficiency Air Conditioners and Heat Pumps Specification and Labeling SANS 941 Energy Efficiency of Electrical And Electronic Apparatus SANS Household Refrigerating Appliances - Characteristics And Test Methods SANS Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods UAE.S Labeling - Energy Efficiency Label For Electrical Appliances, Part 1: Household Air Conditioners UAE.S Labeling - Energy Efficiency Label For Electrical Appliances, Part 3: Household Refrigerating Appliances SASO 2681-Non Ducted Air-conditioners and Heat Pumps - Test And Rating Performance; Hazardous Location SASO 2682-Ducted Air-conditioners and Air to Air Heat Pumps-Testing and Rating for Performance CSA Standard C22.2 No.14, 2013 Industrial Control Equipment; CSA C22.2 No.235, 2004 Supplementary Protectors; CSA C22.2 No.60, 1990 Arc Welding Equipment; CSA E Third Edition Arc Welding Equipment - Part 1: Welding Power CSA B44.1, 2011 Elevator and Escalator Electrical Equipment CSA B Portable Containers for Gasoline and Other Petroleum Fuels; UL Standard 508 Seventeenth Edition Industrial Control Equipment; UL 508A Second Edition Industrial Control Panels; UL 551 Eighth Edition Transformer-Type Arc-Welding Machines Sources; UL 1077 Sixth Edition Supplementary Protectors for Use in Electrical Equipment; UL First Edition Arc Welding Equipment; Part 1: Welding Power Sources ASME A Elevator and Escalator Electrical Equipment Page 14 of 15

15 Occupational Safety Portable and Mobile Ladders ANSI ASC A14.2, ANSI ASC A14.5, ANSI ASC A14.7 and CSA Z11 Protective Footwear ASTM Standard: F 2413; CAN/CSA Standard: Z195, Z334 Adhesive labels CSA Standard: C22.2 No Safety Marking and Labeling UL Standard: UL 969 Systems Page 15 of 15