Philip Payne

Transcription

1 Philip Payne

2 The 2000 range of signs has long been specified by radiation protection and M&E professionals in the UK and wider markets because of the simple robust design and flexibility of the range. The range comprises of single, twin and multiple message section variants with surface and flush mounting options.additional features including landscape/portrait mounting and side light options ensure that the specifier can clearly convey a warning or information in any situation. Any text can be incorporated into the signs and with alternative bezel materials available to special order the applications for this range of products is endless. Applications Hospital X-Ray Department Hospital Laser Departments Recording Studios Interview Rooms Police Stations Surgeries Dark Rooms Theatres Conference Rooms Construction EN CE Marked Semi Secret Legends until illuminated High Frequency control gear RAL 9016 polyester powder coating Special finishes on request IP65 versions on request DC versions on request Custom products to order F MARK IP20 CE MARK DC VERSIONS AVAILABLE KG 1KG EXAMPLE CUSTOM PRODUCT 1006 x 155 x 76mm

3 SF 2617FT 2617ST 2618FF 2618SF 2618ST 2850SB 2850SF 2850FB 2850FF 2874SB 2874SBL 2874SF 2874SFL 2875SF 2874FF 2874FB 2874SP 2874SPL 2879SP 2879FP 365 x 90 x 65mm 1 x 8w T5 170 x 98 x 7mm. Back Box: 155 x 80 x 40mm 1 x 10w SBC 157 x 83 x 48mm 1 x 10w SBC 352 x 105 x 8mm. Back Box: 338 x 90 x 65mm 1 x 8w T5 365 x 90 x 90mm 1 x 8w T5 365 x 90 x 90mm 2 x 15w SBC 270 x 154 x 73mm 1 x 6w T5. 2 x 10w, SBC 270 x 154 x 73mm 2 x 6w T5 302 x 185 x 8mm. Back Box: 268 x 150 x 60mm 1 x 6w T5. 2 x 10w, SBC 302 x 185 x 8mm. Back Box: 268 x 150 x 60mm 2 x 6w T5 1 x 8w T5. 2 x 15w, SBC As 2874SB but with side lights 2 x 8w T5 As 2874SF but with side lights 2 x 8w T5 346 x 216 x 8mm. Back Box: 324 x 190 x 60mm 2 x 8w T5 346 x 216 x 8mm. Back Box: 324 x 190 x 60mm 1 x 8w T5.2 x 15w, SBC 2 x 7w PL. 2 x 15w, SBC As 2874SP but with side lights 180 x 240 x 60mm 1 x 7w PL 2 x 10w SBC 270 x 200 x 7mm 1 x 7w PL 2 x 10w SBC 2940S 2940F 326 x 254 x 73mm Combinations of 15w SBC/8w T5 to suit intermittent or continuous use and nature of application x 276 x 8mm. Back box: 326 x 250 x 60mm Combinations of 15w SBC/8w T5 to suit intermittent or continuous use and nature of application 3

4 2000 LED 2615SL 2617SL 2617FL 2618FL 2618SL 365 x 90 x 65mm 3 x Luxeon LED 170 x 98 x 7mm. Back Box: 155 x 80 x 40mm 2 x Luxeon LED 157 x 83 x 48mm 2 x Luxeon LED 352 x 105 x 8mm. Back Box: 338 x 90 x 65mm 3 x Luxeon LED 365 x 90 x 90mm 3 x Luxeon LED 2850SL 270 x 154 x 73mm 2850FL 302 x 185 x 8mm. Back Box: 268 x 150 x 60mm 2874SL 2874SLL 2875SL 2874FL As 2874SL but with side lights 346 x 216 x 8mm. Back Box: 324 x 190 x 60mm 2879SL 2879FL 180 x 240 x 60mm 4 x Luxeon LED 270 x 200 x 7mm. Back Box: 236 x 180 x 64mm 4 x Luxeon LED 2940SL 2940FL 326 x 254 x 73mm 9 x Luxeon LED x 276 x 8mm. Back box: 326 x 250 x 60mm 9 x Luxeon LED 3 Visit for full range.

5 Lamp Replacement High Power LED Retro Kit Regulatory Changes mean that many inefficient types of lamps including tungsten will no longer be available. Spiralling maintenance and energy costs mean that everyone needs to revisit convention. Lamp Replacement High Power LED Retro Kit - How does it work? For years illuminated signs used in radiation and laser protection have used fluorescent and tungsten lamps. Florescent lamps in continuous use applications, such as controlling areas and tungsten lamps for intermittent use for example when diagnostic equipment is actually in operation. Whilst the lamps have provided effective solutions technology has moved on and use of LED s will reduce energy consumption and extend maintenance intervals. So that these benefits can be achieved with minimal installation costs, Philip Payne have devised a range of retro fit kits that can be simply installed with minimal operational disruption. Once installed the retro kits will provide up to 50,000 hours (10 years) of maintenance free illumination and consume a fraction of the energy of previous solutions. The KIT (Fluorescent replacement) Before The kit comprises of all required fixings, electronics and the illuminating strip. 1. Isolate supply to fitting. 2. Replacement kits fix over existing lamp clips. 3. Existing componetry such as lamp holders and starters are simply removed and discarded. 4. The retro kit plate is screwed onto existing fixings. 5. Reconnect the LED strip and savings commence. After Just add The Kit Before After Just add The Kit The KIT (Tungsten replacement) The kit comprises of all required fixings, electronics and the illuminating strip. 1. Isolate supply to fitting. 2. Remove existing divider plate containing the lamp holders and discard. 3. The retro kit plate is screwed onto existing fixings. 4. Reconnect the LED strip to the terminals and let the savings commence.

6 LEGEND EXAMPLES CUSTOM LEGENDS ARE AVAILABLE Controlled Area Do Not Enter Room In Use Do Not Enter Engaged Do Not Enter Laser On Darkroom In Use Interview In Progress Lecture In Progress Conference In Progress Meeting In Progress Darkroom In Use Do Not Enter Room In Use Recording Theatre In Use Laser In Use Quiet Please Caution Laser In Use Protected Area Do Not Enter Mains On X-Ray In Use X-Ray On Next Controlled Area X-Ray No Entry Controlled Area Laser No Entry Controlled Area X-Ray Do Not Enter Controlled Area Laser Do Not Enter Room In Use Do Not Enter Room In Use X-Ray On Laser On Do Not Enter X-Ray In Use Radiation Controlled Area No Entry Philip Payne Philip Payne Ltd A SUBSIDIARY OF F.W. THORPE PLC Thornhill Road Lode Lane Solihull B91 2HB England. Tel: Fax: mail@p-payne.co.uk Philip Payne Ltd registered in England No We reserve the right to alter specifications without prior notice.