Fluoropolymers are some of the

Transcription

1 3c Fluoropolymer Fluoropolymers are some of the most versatile engineering materials known and, since their discovery over 70 years ago, have been used in nearly every field of modern industry, technology, and science. Their non-stick properties became commonly recognized by the consuming public when E. I. DuPont began marketing his Teflon brand product for use on cookware, as a fiber treatment for stain resistance, and in other household applications. Fluoropolymer material is recognized for its excellent resistance to heat up to 500 F continuously. Lesser known is its usefulness in extremely cold temperatures. Fluoropolymer will remain reasonably flexible to -00 F. ecause fluoropolymers are almost universally inert to industrial chemicals and solvents, their use for corrosion protection has become one of their largest growth areas. With few exceptions, fluoropolymer tubing can handle virtually any corrosive chemical in use today. Newge Industries a wide assortment of tubing products made of fluoropolymers. We can meet most any need for straight tubing, corrugated (for increased bend radii), convoluted (for easier flush cleaning), or retractable coiled fluoropolymer tubing, along with injection-molded PF compression fittings. Fluoropolymer Tubing PTFE, FEP, & PF oiltef oiled FEP tubing orrtef orrugated FEP tubing ontef onvoluted PTFE tubing Pureloc PF compression fittings pplications dhesives & Hot Glue Delivery utomotive able undling hemical Transfer onnector Sleeves orrosives ryogenics Deionized Water Transfer Environmental Sampling Flame Retardant overing Food & everage Processing Internal Sheathing Laboratory & Medical Uses Lighting overs Paint Spray Systems Petrochemical Transfer Pharmaceutical Processing and Packaging Pure ir Systems Pure Water & Fluid Systems Push-Pull able Jacketing Robotics Sight Glass (FEP) Solvent Transfer Wire Insulation More Fluid Transfer Specialists Sign up for our enewsletter at /extrusions

2 Fluoropolymer Tubing PTFE, FEP, & PF Formulations 3c hemically inert; low permeability Manufactured from FD compliant materials for use with food contact surfaces Made in U.S.. Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non-flammable Made without plasticizer which can leach into critical streams Ultra-high-purity grades available for the semiconductor industry What s the difference? PTFE (Polytetrafluoroethylene) a fluorocarbon-based polymer, is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The tubing is translucent white in color. Notes lmost totally inert, FLUOROPOLYMER tubing can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. FLUOROPOLYMER tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. FLUOROPOLYMER s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance. PTFE s translucent white color will vary naturally from lot to lot, however the quality and physical properties do not change. FEP and PF are clearer and can be heat sealed and heat bonded. Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylenejacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through minimum order call for details. ustom Services ut Size olor Overbraid Heat-Form* *FEP & PF only all for more information: or FEP (Fluorinated Ethylene Propylene) resin is pelletized for its hot-melt extrusion process. FEP tubing is known for its gas and vapor permeability properties and excellent UV transmission ratings. While very similar in composition to PTFE, there are a few notable differences. FEP has a lower heat shrink temperature and is clearer and more flexible than PTFE. PF (Perfluoroalkoxy) resin, like FEP, belongs to a class of melt-processible fluoroplastics. PF tubing is also known for its gas and vapor permeability properties and excellent UV transmission ratings. It is similar in composition to FEP but has better heat resistance and a smoother surface. It, too, is clearer and more flexible than PTFE. Physical Properties** PTFE FEP PF Hardness, Shore D Tensile Strength, psi Elongation at reak, % rittle Temperature, F <-450 <-450 <-450 Max. ontinuous Operating Temp., F **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Meet Some of Newge Industries Owners Through an Employee Stock Ownership Plan (ESOP), we re part owners in the company, and that makes your satisfaction an investment in our future. hanthou Voeurn Plastic Manufacturing/Owner 5 years Lori Stiverson Production Planner/Owner year rian Katchur Hose Shop Manager/Owner 4 years

3 3c Fluoropolymer Tubing PTFE, FEP, & PF Formulations Note that sizes are listed first due to the variety of materials offered FLUOROPOLYMER TUING Inch Sizes ID OD WLL /3 /3 /6 /6 3/3 /8 /8 3/6 3/6 /4 /4 5/6 7/6 7/6 / / 9/6 5/8 /6 7/8 -/4 -/ /6 3/3 /8 3/6 5/3 3/6 /4 /4 5/6 5/6 7/6 / / 9/6 9/6 5/8 5/ /8.00 /8-5/ STNDRD LENGTH (FT.) , 00 50, 00 50, 00 50, 00 50, 00 50, 00 50, 00 50, 00 5, 50, 00 5, 50, 00 5, 50, 00 5, 50, 00 5, 50, 00 5, 00 5, 50, 00 5, 50, 00 5, 50, 00 5, 50, Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5 Straight PTFE * WORKING URST FEP * ^^ * WORKING URST PF ^^ ^ WORKING URST *Limited stock item; lead times and minimums may apply call for details. ^vailable in 5 and 00 ft. lengths only. ^^vailable in 50 and 00 ft. lengths only. Sold by standard coil length only. urst pressures are calculated using a 5: safety factor. dd length suffix to part number when ordering. Example: 50 ft. of /6 x I.D./8 O.D. PTFE is part number NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft. Orders for 00 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 00 ft. ll FEP and PF lengths are supplied in single-section packages. OLD indicates the critical dimension for fittings application. FLUOROPOLYMER TUING Metric Sizes ID (MM) OD (MM) WLL (MM) STNDRD LENGTH (FT.) 50, 00 50, 00 50, 00 5, 50, 00 5, 50, 00 5, 50, 00 PTFE * * FEP ^ PF *^^ *Limited stock item; lead times and minimums may apply call for details. ^vailable in 50 ft. lengths only. ^^vailable in 50 and 00 ft. lengths only. Sold by standard coil length only. dd length suffix to part number when ordering. Example: 50 ft. of mm I.D. x 4mm O.D. PTFE is part number NOTE: Orders for 50 ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling 50 ft. Orders for 00 ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling 00 ft. ll FEP and PF lengths are supplied in single-section packages. OLD indicates the critical dimension for fittings application. 3

4 oiltef 3c oiled FEP Tubing Made of chemically inert clear FEP Manufactured from FD compliant materials Heat set into a retractable coil; excellent recoil memory Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing llows flexibility to otherwise semi-rigid fluoropolymer tubing Made in U.S.. D E ll oiltef is made to order call for details Notes lmost totally inert, OILTEF can be used with all industrial solvents, chemicals, and corrosive materials even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer s non-stick property allows transport of viscous, sticky material without line clogging. It also offers outstanding aging resistance. OILTEF is manufactured through a fabrication process which heat sets the coils. The coils should remain stable up to 00 F. t higher temperatures the coils will begin to relax and lose their set. If the application involves elevated temperatures, in-house testing is recommended. OILTEF may be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. are should be taken with steam sterilization to prevent coil relaxation. Testing is recommended. OILTEF can be manufactured from.085" to /" tubing I.D. The coil diameter can be produced from " O.D. to 4" O.D. PF-formulated OILTEF is available by special order * * * * * ID /6 /8 3/6 /4 OD 3/6 /4 5/6 / D^ O.D. OF OIL -/8 -/ -/4-4 E^ MXIMUM VILLE EXPNDED LENGTH; NOT INLUDING TILS, 4, 48, 4, 48, 7, 4, 48, 7 4, 48 *Non-stock item; lead times and minimums apply call for details. ^These dimensions are nominal. dd length suffix to part number when ordering. Example: inches of /6 I.D. x 3/6 O.D. tubing is part number The retracted length is approximately /4 of the maximum expanded length excluding tails. Wall thickness for all standard sizes is /6. Tail length (item ) is 6 for all listed sizes. OLD indicates the critical dimension for fittings application. ustom Services ut Size nd More all for more information Physical Properties** Hardness, Shore D Tensile Strength, psi Elongation at reak, % rittle Temperature, F -450 Min. Operating Temp. for Tubing, F -00 Max. Operating Temp. for Tubing, F 00 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (non-coiled) tubing. See Notes for additional information. 4 More Newge Industries Owners Did you know...? We haven t had a product liability claim since we began manufacturing tubing 0 years ago. braham ooper Warehouse/Owner year Kimly Ourn Silicone Molding Supervisor/Owner 3 years Steve Midgette Director of Finance & Human Resources/Owner 3 years

5 3c orrtef orrugated FEP Tubing Made from FEP fluoropolymer tubing orrugations allow a nearly zero bend radius easily flexed an be extended or compressed without affecting the tube s I.D. Made without plasticizers which can leach into critical streams Made from FD compliant materials Has all the chemical and electrical properties of straight-walled FEP tubing May be overbraided with Kevlar for higher pressures^ Made in U.S.. Preferred direction of flow D MX. ID /4 / 5/8 7/8 -/ UFF LENGTH * -/ -/ Recommended Fittings & lamps Thermobarb barbed fittings Oetiker ear type clamps Kwik lamp nylon double bond hose clamps Worm gear clamps E (Length Including uffs) WLL D ORRUG- TION OD REF. 5/8 5/6 -/6 -/4-7/6-3/6-5/8 WORKING PSI T URST PSI T Specify E dimension at order time. Maximum overall available length: ft. (including cuffs). *Workable I.D. length of the cuff (straight ends). ll lengths supplied with dimension cuffs. ll pressures are calculated and not based on actual testing. OLD indicates the critical dimension for fittings application. More Newge Industries Owners Did you know...? We offer drop shipment and blind drop shipment capabilities. ustom Services ut Size Overbraid nd More all for more information Notes Vacuum Service at : 9.9 in./hg. end Diameter at : / of tubing I.D. Optimal flow is achieved and turbu lence minimized by passing fluids through ORRTEF in the direction of the corrugation angles (as illustrated). ORRTEF is heat sealable, and the cuffs (straight ends) are made to accept standard barbed fittings. The end may be flared or expanded to permit shrink-tight connections. ORRTEF is manufactured in an industrial atmosphere and should be properly sterilized for clean-flow applications. For optimal cleaning of ORRTEF, the tube should be stretched to its maximum length and held vertically (direction of flow: down). Due to the annular corrugations, it may not be possible to remove all traces of particulate from ORRTEF, even under optimal cleaning conditions. ^Overbraiding with Kevlar will permit a minimum increase of six times the listed pressures. Kevlar overbraiding is available for sizes up to 7/8 I.D. call for details. Physical Properties** Hardness, Shore D Tensile Strength, psi Elongation at reak, % rittle Temperature, F -450 Min. Operating Temp. for Tubing, F -00 Max. ont. Svc. Temp. for Tubing, zero pressure, F 00 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (noncorrugated) tubing. hou Tea Silicone Manufacturing/Owner year Steve Kuhns Natl. Sales Mgr. - Plastics/Owner 3 years Josh Ream Silicone Manufacturing Supv./Owner 7 years 5

6 ontef onvoluted PTFE Tubing 3c Translucent PTFE tubing offers excellent chemical and electrical properties vailable from stock with or without a stainless steel wire encircling the O.D. Wire coil provides increased pressure capability and aids in electrical grounding Easily flexed spiral construction allows far greater flexibility than straight wall tubing Spiral construction also allows for easier cleaning Made from FD compliant materials Made in U.S.. (Wall) (uff Length) Notes (ID) D (onvolution OD) F (onvolution ID) ONTEF s helical construction aids in self cleaning when flushed with standard cleaning fluids. The cuffs (straight ends) are made to accept standard barbed fittings. Hose assemblies made to your specifications are available. PTFE s color will vary naturally from lot to lot, but the quality and physical properties do not change. FEP ONTEF for longer continuous lengths up to 500 ft. is available through custom order. ONTEF Without Wire: Vacuum Service: 7 in./hg at. onvolutions are molded into the tubing and will not cold flow into a straight wall under normal conditions. ONTEF With Wire: Vacuum Service: 7 in./hg at. For high vacuum applications, ONTEF can be produced with wire on the I.D. call for details. *See Terms and onditions greement for Limitations Physical Properties** E (Length Including uffs) Hardness, Shore D Tensile Strength at reak, psi 3500 Elongation at reak, % Embrittlement Temperature, F -450 Min. Operating Temp. for Tubing, F -00 Max. Operating Temp. for Tubing, F 500 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (non-convoluted) tubing. Recommended Fittings & lamps Thermobarb barbed fittings Oetiker ear type clamps Kwik lamp nylon double bond hose clamps Worm gear clamps ustom Services ut Size Overbraid nd More all for more information

7 3c ontef onvoluted PTFE Tubing ONTEF Without Wire ID /4 5/6 / 5/8 -/4 -/ -/4 -/ -/ -/ -/ D REF F END RDIUS / - -/4 -/ /4 MX LENGTH (FT.) E dimension to be specified at time of order. ll lengths will be supplied with dimension cuffs. ll pressures are calculated and not based on actual testing. OLD indicates the critical dimension for fittings application. WORKING URST ONTEF With Wire ID /4 5/6 / -/ D REF F END RDIUS / - -/4 - -/4 MX LENGTH (FT.) E dimension to be specified at time of order. ll lengths will be supplied with dimension cuffs. ll pressures are calculated and not based on actual testing. OLD indicates the critical dimension for fittings application. WORKING URST More Newge Industries Owners Did you know...? We ve been in business for over 60 years. Kristin Swinand Marketing ssistant/owner 5 years David Holloway Quality ontrol Technician/Owner 3 years Joshua Mercado Silicone Manufacturing/Owner years nthony Schmidt Warehouse/Owner 7 years e Thach Silicone Molding/ Owner year Nick Scarpill Technical Sales Rep./Owner year 7

8 Pureloc PF ompression Fittings 3c PF body made from virgin, high purity materials Ideally suited for corrosive environments and chemical applications Less surface particulate resulting in cleaner operation Easy to disconnect and reuse Excellent lock and seal ability Numerous configurations available Installation Instructions: D E Pressure (psig) Notes With a fitting body made from virgin, high purity PF fluoropolymer, PURELO is ideal for ultra-pure fluid applications where contaminationfree systems are used. This includes semiconductor manufacturing, food and beverage processing, medical and biomedical, laboratory, chromatography equipment, and the chemical industries. The gripper coupled with the precision-made ferrule provides excellent leak-tight connections and prevents tubing blow-out. Materials of onstruction: Wetted: PF body, PTFE ferrule Non-wetted: PF nut, titanate filled ETFE gripper Pressure Ranges: 5 PSIG (8.6 bar); see chart below Pressure vs. Temperature /8, /4, & / Fluid Temperature ( ) Fluid Temperature ( F) The values above are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Pressure (bar). ut tubing () cleanly at 90.. Push tubing through small end of nut (), small end of gripper (), large end of ferrule (D), and seat tubing end into fitting body as far as it will go (E). 3. Thread nut onto body and finger tighten while assuring that tubing remains seated in bottom of fitting. To complete the installation, tighten nut with a wrench at least one additional turn. void overtightening. Size Recommendations: See chart below; these sizes represent the only fluoropolymer tubing dimensions recommended for use with Pureloc fittings. Fitting Size /8 /4 / Recommended Tubing Size /8 O.D. x /6 I.D. /4 O.D. x 5/3 I.D. O.D. x /4 I.D. / O.D. x I.D. O.D. x 5/8 I.D. More Newge Industries Owners Did you know...? We acknowledge and confirm every order to ensure accuracy. 8 Shaleem hohan Silicone Manufacturing/Owner year Mabory Tav Silicone Molding/ Owner 5 years raig Zelin uyer/planner/ Owner year

9 3c Pureloc PF ompression Fittings Male dapter TUE OD x NPT /8 x /8 /8 x /4 /4 x /8 /4 x /4 /4 x /4 x / x /8 x /4 x x / / x /4 / x / x / / x x / x Female dapter TUE OD x FNPT /8 x /8 /8 x /4 /4 x /8 /4 x /4 /4 x /4 x / x /4 x x / / x /4 / x / x / / x x / x Male 90 Elbow TUE OD x NPT /4 x /8 /4 x /4 x /8 x /4 x x / / x /4 / x / x / / x x / x Female 90 Elbow TUE OD x FNPT /8 x /8 /4 x /4 x /4 x x / / x /4 / x / Union 90 Elbow TUE OD /8 /4 / Reducing 90 Elbow TUE OD x TUE OD x / Nut Replacement Kit ontains one nut, one gripper, and one ferrule TUE OD /8 /4 / continued on next page 9

10 Pureloc 3c PF ompression Fittings Male ranch Tee TUE OD x NPT /4 x /8 /4 x /4 x /8 x /4 x x / / x /4 / x / x / x Male Run Tee TUE OD x NPT /4 x /8 /4 x /4 x /4 / x /4 / x / x Union Tee TUE OD /8 /4 / Union onnector TUE OD Reducing Union onnector TUE OD x TUE OD ulkhead Union TUE OD /8 /4 / /8 x /4 /4 x /4 x / x / / x /8 /4 / More Newge Industries Owners Did you know...? We re solar powered. 4,000 solar panels on our building s rooftop provide one megawatt of electricity annually. 0 Robert Volk Director of Manufacturing/Owner 3 years Lena Liep Silicone Molding/ Owner 3 years lex Kakad Product Marketing Manager/Owner year Michael Horvath Technical Sales Rep./Owner 0 years Khim Kim Silicone Manufacturing/Owner 8 years Khoeuth Som Fabrication/Manufacturing/Owner years

11 3c ustom & Fabrication Services reate Parts ustomized to Meet Your Needs Going beyond basic tubing, hose, and fittings has been an integral part of Newge Industries' business for many years. We possess the capabilities and experience to create custom parts perfectly suited to your application. Postextrusion fabrication and hose assembly opens another range of options for providing parts to your exact specifications at a reasonable cost. ustom oiling ustom Extrusions Overbraiding & Jacketing Hot ond - Thermal onding Heat Formed Shapes Fabrication Services - utting, Slitting, Printing, etc. Hose ssemblies Dip Molded Tubing Molded Silicone omponents nd More Discuss your application with someone from our knowledgeable Sales Team today or % Order ccuracy We know how important order accuracy is to you. That s why we take a number of steps to manufacture and ship your order correctly the first time. From acknowledging and confirming orders, to product quality verification, to the careful examination of custom orders, we do our best to ensure that your order ships accurately. Working our way toward 00%. Marty Golin Technical Sales Rep./Owner years Gene Mcabe ustomer Service Rep. - Software Solutions/Owner 5 years Lawrence Morano Global Sales Manager/Owner year Elvin Naranjo Warehouse/Owner year Tom Slovik Quality ontrol Inspector/Owner 7 years Sophea Tun Silicone Molding/ Owner 5 years Michael rmstrong Warehouse/Owner year

12 More Newge Industries Products Tubing & Hose PV Polyurethane Silicone Fluoropolymer Nylon Polyethylene Polypropylene TPR Viton Latex Hytrel ustom Services ut Size olor oil Overbraid Heat Form Hot ond ssemblies Hardness More Fittings & lamps for Fluoropolymer Pureloc - PF compression fittings. Stock sizes for /8 to O.D. in 3 styles. Made from chemically inert fluoropolymer. Thermobarb Plastic - Precision molded barbed fittings in nylon-6, high density polyethylene, PVDF, polypropylene, reinforced nylon, or reinforced polypropylene. Sizes for /8 to I.D. tubing in 5 styles. Thermobarb rass - Durable brass barbed fittings. Sizes for /8 to I.D. tubing in 0 styles. Oetiker Ear Type lamps - Stainless steel or zincplated carbon steel clamps with a unique breathable design. 35 sizes from 5/3 to -9/6 in 3 styles. Kwik lamp - Nylon double-bond hose clamps. 3 sizes from /4 to 4-/4 nominal O.D. Worm Gear lamps - Stainless steel worm screw clamps. 8 sizes from to 6 in 6 styles. Tubing & Hose utting Tools oiltef, ontef, orrtef, Hot ond, Kwik lamp, Pureloc, Thermobarb, Newge, Fluid Transfer Specialists, The "N" Logo, and dvantapure are trademarks of Newge Industries, Inc. Oetiker reg. TM Oetiker, Inc. Hytrel trademark E. I. du Pont de Nemours and ompany Viton trademark DuPont Performance Elastomers WRRNTY: Newge Industries products are warranted to be free from defects in material and workmanship. ny product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of Newge Industries' products, item for item, which after examination by Newge Industries are deemed defective. Newge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTIE: Newge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-ge. Newge Industries, Inc. 06 Specifications are subject to change without notice. 3/3/6 DISTRIUTOR NER High Purity Tubing & Hose Sanitary tubing, hose, fittings, assemblies, and molded components from our dvantapure division meet the needs of the pharmaceutical, biotech, food and beverage, dairy, cosmetics and fragrances, and chemical industries, as well as other sanitary applications. dvantapure products are available through a network of select distributors. 3c 45 James Way Southampton, P NEWGE ( ) Fax: info@newageindustries.com