Flow Sensors. Convenient, Reliable and Economical Flow Measurement. THORNTON Leading Pure Water Analytics

Transcription

1 THORTO Leading Pure Water nalytics Economical Paddlewheel Hi-Purity PF Ultrasonic Vortex Insertion-type Vortex Convenient, Reliable and Economical Flow Measurement

2 Paddlewheel Reliable and Economical Inline Paddlewheel flow sensors provide continuous flow measurement at a low cost for a variety of solidsfree liquid applications. The open cell rotor is made of PVDF and the shaft and bearing of ceramic material offering superior life and operating performance. The modular quarter-turn electronics assembly makes service and maintenance fast and easy and allows the removal of the electronics without removing the entire sensor body. Insertion Sensor SST PT Thread SST Tri-Clamp In-Line Paddlewheel Specifications Mounting Fitting: Straight Pipe Requirements: Wetted Materials: Flow Ranges: Included with sensor, materials as noted Pipe diameter: 10 x upstream, 3 x downstream PVC versions: PVC, PVDF, Ceramic, Viton Tri-Clamp SST versions: SS, PVDF, Ceramic, EPDM PT Threaded SST version: SS, PVDF, Ceramic 1-33 ft/s ( m/s) Pressure: PVC versions: 140 psig at 122 F (10 bar at 50 C ), except insertion types: 85 psig at 122 F (6 bar at 50 C) SST versions: 230 psig at 212 F (16 bar at 100 C) ccuracy: ± 0.5% of full scale, + 2.5% of reading with standard mean K-factor in reference conditions: water at 20 C (68 F) Linearity: ± 0.5% of full scale, at 32.8 fps (10 m/s ) Repeatability: 0.4% of reading mbient/storage: Temperature: Enclosure Rating: Electronics Enclosure Material: Wiring: PVC version: 32 F to 140 F (0 C to 60 C) SST versions: 14 F to 176 F(-10 C to 80 C) EM 4X and IP65 Polycarbonate Smart version uses standard 770MX patch cables. Cable not provided for Pulse version. Use 3-conductor, 20 gauge shielded cable such as Belden 9364, or equivalent. Maximum recommended cable length is 160 ft (50 m) 2

3 Pipe Size of Included Fitting Pulsed Smart Pulsed Smart True Union Body Style In-Line Paddlewheel PVC, True Union Body Style - See Tables and B ½" ¾" " ¼" ½" " " Insertion type w/saddle " Insertion type w/saddle " Insertion type w/saddle SST Stainless Steel Body with PT Threaded Connections - See Table C ½" ¾" " ¼" ½ " SST, SME - BPE Tri-Clamp Body Style - See Table D ¾" " ½" " ½" Insertion Saddle PT Threaded Body Style Table 8030 style Sensors True Union ut with Solvent Ends (PVC) or Fusion Spigot Ends (PVDF) Orifice D Inches (mm) 0.59 (15) 0.79 (20) 0.99 (25) 1.26 (32) 1.57 (40) 1.97 (50) D D (20) 0.99 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63) 1.69 (43) 2.09 (53) 2.36 (60) 2.91 (74) 3.27 (83) 4.06 (103) 3.55 (90) 3.94 (100) 4.33 (110) 4.33 (110) 4.73 (120) 5.12 (130) (96) 4.18 (106) 4.57 (116) 4.57 (116) 5.00 (127) 5.36 (136) 5.04 (128) 5.67 (144) 6.30 (160) 6.62 (168) 7.41 (188) 8.35 (212) H 3.62 (92) 3.51 (89) 3.52 (89.5) 3.66 (93) 3.82 (97) 4.10 (104) Tri-Clamp Body Style Table B Saddle for 8020 Style Insertion Sensors Orifice D Inches (mm) D B 0 (76) 3.54 (90) 5.66 (144) 4.48 (114) 4.00 (101) 4.33 (110) 6.53 (166) 4.67 (119) 6.00 (152) 6.29 (160) 8.50 (216) 5.17 (131) Body Material: PP/PVC Seal Material: EPDM Table C 8030 Style Female PT Thread Stainless Steel (316L) Sensors Orifice D D (PT) Inches (mm) L H 0.59 (15) 1/ (85) 0.67 (17) 3.62 (92) 0.79 (20) 3.74 (95) 0.72 (18) 3.51 (89) 0.99 (25) (105) 0.72 (18) 3.52 (90) 1.26 (32) 1 1/ (120) 0.83 (21) 3.66 (93) 1.57 (40) 1 1/ (130) 0.79 (20) 3.82 (97) 1.97 (50) (150) 0.94 (24) 4.10 (104) Table D 8030 Style Tri-Clamp Stainless Steel (316L) Sensors Body Size 1 1 1/ /2 Orifice D Inches (mm) 0.79 (20) 0.99 (25) 1.57 (40) 1.97 (50) 2.56 (65) D2 D (16) 0.79 (20) D 0.99 (25) 0.87 (22) 1.71 (44) (51) H 3.51 (89) 3.52 (90) 1.37 (35) 1.71 (44) (51) 6.34 (161) 3.82 (97) 1.87 (48) 2.22 (57) 2.52 (64) 7.56 (192) 4.10 (104) 2.37 (60) 2.78 (71) 5 (78) 8.50 (216) 4.41 (112) 4.69 (119) 5.08 (129) OTE: Installation fittings conform to BS 4825 / SME BPE Standard 3

4 325-Series Compact Sanitary Turbine nother choice for applications demanding SME-BPE-2009 Standard and efficient flow measurement. 325-series flow sensors feature a compact flow sensor body with Tri-Clamp type connections and a magnetic variable reluctance type coil. Wetted Parts: Certification: Pressure: Temperature: Electrical Connection: Process Connections: Linearity: Repeatability: Body 316 SS, Ra 32 microinch (0.8 micrometer) finish; 17.4 ph SS rotor; 15.7 MO ph SS retaining rings; hard carbon composite bearings. SME-BPE 2009 Rated, manufacturers calibration and materials certificates included. 500 psi (35 bar) maximum 450 F (232 C) maximum Smart models have 1.5 ft (0.5 m) cables and require patch cords, maximum length 300 ft (91 m). Pulse input models have 20 ft (6.1 m) twisted cable with 1/2 PTM conduit connector. Wiring may be run up to 2,000 ft (610 m) with 3 conductor, 20 gauge, shielded cable, such as Belden To achieve optimum performance, maintain the SME standard and to protect the bearings from excess turbulence and damage, a minimum of 10 pipe diameters upstream and 5 pipe diameters downstream of turbine size pipe must be used. For example, the 1/4 turbine with Tri-Clamp fittings must have 1/4 inlet and discharge piping. In addition, proper inside diameter flange gasket must be used. Consult Thornton for installation kit if needed. ±0.5% of reading** ±0.1% of reading** Flow Range Tri-Clamp Turbine Dimensions (in.) GPM (LPM) Fitting Size B C D (1.3-13) (1.3-13) (2.8-28) (2.8-28) (4.7-36) (4.7-36) (6.6-60) (6.6-60) ( ) 4-60 (15-227) 6-93 (23-352) (30-492) (57-852) (95-1,514) (151-2,460) /4 1/4 3/8 3/8 1/2 1/2 5/8 5/ / / Pulse Input* Pulse Input* * Pulse input flow sensors for use with M300 FLOW and 770MX (channels 5 and 6 only) do not include Smart Sensor communication and do not use patch cables. separate isolated 12 VDC power supply ( for ) is required when sensor is used with 770MX. Refer to 770MX and M300 FLOW operating manuals for respective wiring instructions. ** Based on manufacturer s calibration in water at 70 C "B" "" C L "D" "C" C L 4

5 PF Vortex Flowmeters Superior low flow rate performance Display: 4-digit LED plus high & low alarm indicators Straight tube requirements: 10 x diameter upstream and 2 x diameter downstream. Wetted materials: PF Perfluoroalkoxy Temperature: F (0-100 C) Viscosity: For liquids more viscous than water, consult Thornton. Electrical connections: 6.5 ft (2 m) cable may be extended with 22 gauge 6-conductor shielded cable up to 325 ft. (100 m) for 770MX pulse input only. Enclosure: EM 4X, IP65 Power supply: One external 12 VDC isolated power supply (P/ , or for US and Canada) is required for one or two pulse input sensors. Certification: CE rated, certificate of accuracy included Flow rate GPM Maximum Pressure psig (bar) Size (L/min.) t 68 F (20 C) t 212 F (100 C) Straight tube end - connections 3/8 in ( ) 100 (7) 58 (4) /2 in (2-20) 145 (10) 100 (7) /4 in (10-70) 100 (7) 58 (4) in (15-150) 70 (5) 43 (3) Male Flaretek end - connections 3/8 in ( ) 100 (7) 58 (7) /2 in (2-20) 145 (10) 100 (7) /4 in (10-70) 100 (76) 58 (4) Female Flaretek end - connections 3/8 in ( ) 100 (7) 58 (7) /2 in (2-20) 145 (10) 100 (7) /4 in (10-70) 100 (7) 58 (4) Straight Tube-End Size Dimensions (mm) D d t ± /8 in. φ 9.52 φ /2 in. φ 12.7 φ /4 in. φ φ in. φ 25.4 φ Flowrate Range for PF Vortex Flowmeters Flaretek-End Size L (male-ends) Dimensions (mm) L (female-ends) 3/8 in /2 in /4 in Size Minimum Flowrate (L/min) Max Flowrate (L/min) cp** * / /2 in /4 in in * Viscosity of water at 20 C ** cp = Viscosity of measurement fluid (in centipoise) Mounting Dimensions (for all models) rrow on body indicates flow direction 50.5 mm 68.5 mm 4-m4x mm Male Flaretek end connection shown in dashed lines (typical both ends) L/min ET VORTEX FLOWMETER 190 mm High Low 54 mm 6.5 ft. (2 m) shield line with heat-proof vinyl insulation Female Flaretek end 32 mm 5

6 Forward-Swept Impeller Sensors with Fittings Economical non-magnetic measurement Mounting fitting: Straight pipe requirements: Electrical connections: Power supply: ccuracy: Repeatability: Included with insertion sensor (flow-thru and socket union type sensors do not require fitting), wetted parts as noted. 10 x diameter upstream and 5 x diameter downstream. Smart models have 1.5 ft (0.5 m) cable and smart connector and use patch cords up to 300 ft (91 m). Pulse input models have 20 ft (6.1 m) cables and may be extended up to 2,000 ft (610 m) using 20 gauge, shielded cable: 2-conductors for socket tee models, 3-conductors for other models. One external 12 VDC isolated power supply is required for one or two pulse input sensors. One kit is required for each and larger pulse input sensor. ± 1% of full scale over operating range ± 0.5% of full scale over operating range Pipe Size of Included Fitting Wetted Materials Flow Range Pressure at Temperature PSIG (bar) F ( C) Ref. o Pulse Input Pulse Input Socket tee 2 Socket tee 3 Socket tee 4 Socket tee 1/2 Socket union Socket union 1 Socket union PVC tee, PPS, ylon, tungsten carbide, EPDM PVC tee, PPS, ylon, tungsten carbide, EPDM PVC tee, PPS, ylon, tungsten carbide, EPDM PVC tee, PPS, ylon, tungsten carbide, EPDM PVDF, Viton, ceramic, Tefzel PVDF, Viton, ceramic, Tefzel PVDF, Viton, ceramic, Tefzel to 6 Repl. Sensor for PVC Pipe, fitting not included* to 6 Repl. Sensor for PVDF Pipe, fitting not included* 1-20 GPM GPM GPM 100 (7) 40 (2.8) 275 (19) 140 (10) 68 (20) & 140 (60) 65 (18) & 220 (104) 228PV PV PV PV *Requires field configuration for pipe size. PVDF Socket Union 2.16 (55 mm) PVC Socket Tee E Minimum Clearance 3.50 (89 mm) B 2.69 (68 mm) D B C C DI 3.59 (91 mm) 6 PVC Size Inches(mm) B C 1/ (142) 3.54 (90) 1.85 (47) 6.12 (155) 3.92 (100) 4.32 (110) 1.85 (47) 2.24 (57) 2.52 (64) PVC Inches(mm) Size (127) 0.63 (143) 6.50 (165) B 5.16 (131) 5.64 (143) 6.83 (173) C 2.38 (60) 2.88 (73) 4.23 (107) D 3.97 (101) 4.20 (107) 4.68 (119) E 5.00 (127) 5.00 (127) 5.00 (127) (187) 7.83 (199) 5.38 (137) 5.10 (130) 5.00 (127)

7 Flat Paddlewheel Low cost measurement Mounting fitting: Straight pipe requirements: Electrical connections: Linearity: Repeatability: Certification: Must be obtained separately except for 1/4" PT models x diameter upstream and 5 x diameter downstream. Smart models have 1.5 ft (0.5 m) cable and smart connector and use patch cords up to 300 ft (91 m). Pulse input models have 25 ft (7.6 m) cables and may be extended up to 200 ft (61 m) for magnetic type and 1,000 ft (305 m) for Hall effect type, using 2-conductor, 22 gauge, shielded cable. 1% FS ± 0.5% of full scale, except ± 0.25% of full scale for 1/4" PT models CE rated, certificate of accuracy included where indicated. Pipe Size Hall Effect & Up Magnetic Wetted Materials 316SS, CD4Mcu, Fluoroloy B 316SS, CD4Mcu, Fluoroloy B Cert. Incl. Y Flow Ranges ft/s (0.1-6 m/s) Pressure at Temperature PSIG (bar) F ( C) 180 (12.4) 25 (1.7) * Specify pipe material, size, and schedule or inside diameter to enable Smart calibration. ** ot for use with 770MX Smart or Pulsed input. For M300 and 200Flow only. Y 1-20 ft/s (0.3-6 m/s) 1-20 ft/s (0.3-6 m/s) 180 (12.4) 25 (1.7) 1500 (103) 68 (20) & 194 (90) 68 (20) & 194 (90) 300 (149) Ref o P P P2 P51530-P0 P51530-P1 P525-1 P525-2 Pulse Input ** ** * * * * * * * Pulse Input ** ** Plastic Metal 1-1/4 X 11-1/2 PSM Thread Sensor Body Diameter 1.05 (26.7 mm) (38.4 mm) (63.5 mm) 7

8 Visit for more information Mettler-Toledo Thornton, Inc. 36 Middlesex Turnpike Bedford, M US Tel Fax Toll-Free: PURE (US and Canada only) thornton.info@mt.com Subject to technical changes. Mettler-Toledo Thornton, Inc. ML0116 Rev.F 11/12 Quality certificate. Development, production and testing to ISO certified ServiceXXL provider. CE Compliant