Europass Curriculum Vitae

Transcription

1 Europass Curriculum Vitae Personal information Surname(s) / First name(s) Ruocco Gianpaolo Address(es) Vico III Giostra, Tito, Italy Telephone(s) Mobile: Fax(es) (s) gianpaolo.ruocco@unibas.it; Nationality(-ies) Italian Date of birth 1/05/1961 Gender Male Professional experience Date Function Main tasks and responsabilities Name and address of employer Activity field 11/1997 present Associate Professor Teaching held from academic year 1997/98 to date: Engineering Thermodynamics. Teaching held from academic year 2004/05 to date: Alternative Energy Resources in the Industrial Framework. Teaching held from academic year 2005/06 to date: Transport Phenomena. Supervisor of 17 degree Theses in the field of Food Technology. Scuola d Ingegneria, Università degli Studi della Basilicata, Campus Macchia Romana, Potenza Academic teaching in the field of industrial and environmental engineering Date Function Advisor of academic spin-off CFDINNOVA (Università degli Studi della Basilicata) Spin-off presently incubated by BiCube/AREA Science Park (Trieste, Italy) Date Function Head of technology transfer group CFDfood (Università degli Studi della Basilicata) Total amount About 200k Eur Project title and client company Characterization of non-newtonian fluids through a filling valve; Optimization of filling gulping in cartons (Tetra Pak, Modena) Analysis and control of foam formation during filling of carbonated drinks (Sidel, Parma) Shelf-life prolongation of mineral waterd packed in PET (CocaCola, Atene) Optimization of grapes dehydration for passito wines; Seeds separation in wine making (Cantine del Notaio, Rionero in Vulture) Feasibility study of an innovative radiofrequency system for wastewater stabilization in the dairy sector (Pace e Becce, Potenza) Techno-economic feasibility study for the energy saving in industrial oil mills (Rapolla Fiorente, Rapolla) Engineering and optimization of treatment, packaging and transport of fresh fish products (Derado, Matera) Optimization of treatment phases for precious wall decorations (Greenfax, Matera) Optimization of storage and shel-life prolongation of fresh truffles (La Radice, Avigliano) Design of an efficient container for food catering (RR Puglia, Noci) Page 1 / 8 - Curriculum vitæ of

2 European patents Under evaluation: Evolutive kinetics of liquid concentrated foods during direct thermization and dilution A computational tool to assess neurotoxic and carcinogenic molecules formation during food cooking Date 2/2/ /10/2007 Function Advisor of the Commission of Patents and Technological Transfer of the University Tasks Supervision of Commission to grant request of patents and spin-offs. Name and address of employer Università degli Studi della Basilicata, Campus Macchia Romana, Potenza Activity field Institutional management Date 13/11/2002 1/7/2005 Function Director of the University s Scientific Library Tasks Technical and administrative direction of the scientific library: drafting of the service regulations, organization structure, financial management in relation to the academic policies. Name and address of employer Università degli Studi della Basilicata, Campus Macchia Romana, Potenza Activity field Institutional management Date Function Expert Evaluator for Framework Programmes 5 and 6 of the European Community Main task Participation in evaluation panels of projects to be funded within FPs, with reference to energy issues. Name and address of employer Research Directorate-General, European Community, SDME 2/2, Bruxelles Activity field Technical and administrative evaluation of international research projects Date Funzione Tasks Name and address of employer Activity field 1999 present Local Head of Research Activities for the Italian Ministry of University (Projects of Relevant National Interest PRIN Organization, management, coordination of the local research group for the following 4 PRIN projects: Combined modes of heat transfer in gaseous impinging jets Visualization and integrated simulation for the evaluation of heat transfer from impinging jets over plates in innovative configurations Practical applications in process industries of heat and mass exchange due to impinging jets Transport phenomena from plane and modified surfaces Università degli Studi della Basilicata, Campus Macchia Romana, Potenza Scientific research in the engineering field Professional abilities Mother tongue(s) Other languages Italian Self-assessment Understanding Speaking Writing European level (*) English French Spanish Listening B2 Independent C2 C2 Reading Spoken interaction (*) Common European Framework of Reference (CEF) level Spoken production C2 Page 2 / 8 - Curriculum vitæ of

3 Member of associations American Society of Mechanical Engineers (ASME), dal 1990; Institute of Food Technologists (IFT), dal 2004; Associazione Italiana di Tecnologia Alimentare (AITA), dal 2004; Unione Italiana Termofluidodinamica (UIT), dal Referee of scientific journals Teaching abroad Numerical Heat Transfer, ; International Journal of Thermal Sciences, from 2001; Heat and Mass Transfer, froml 2001; International Journal of Heat and Mass Transfer e International Communications in Heat and Mass Transfer, from 2004; Journal of Food Engineering, from 2008; AIAA Journal of Thermophysics and Heat Transfer, froml 2009; Food and Bioprocess Technology, froml 2009; International Journal for Computational Methods in Engineering Science & Mechanics, from 2009; Applied Energy, froml 2011; International Journal of Computational Fluid Dynamics, from 2012; Experimental Thermal Fluid Science, from Institute of Fluid Science, Tohoku University, Sendai (J), in 2004: Heat transfer; Universidad Politécnica de Valencia, Valencia (E), from 2006 to present: Transfer phenomena in Food Processes. Scientific collaborations Ist. Scienze Produzioni Alimentari (ISPA-CNR), Bari, from 2011; Dip. Ingegneria Chimica, Università degli Studi di Salerno, from 2011; Centro Internacional de Métodos Numéricos en Ingenierìa (CIMNE), Universidad Politécnica de Cataluña (UPC), Barcelona (E), from 2010; Universidade Estadual Paulista Júlio de Mesquita Filho, São José do Rio Preto (BR), from 2008; Universidad Politécnica de Valencia, Valencia (E), from 2006; Universidad de Murcia, Murcia (E), from 2008; Universidad Politécnica de Cartagena, Cartagena (E), from 2008; Dip. Scienze Alimenti, Università degli Studi di Udine, from Page 3 / 8 - Curriculum vitæ of

4 Research Activity The research activities of prof. Ruocco in different fields of Engineering Thermodynamics is documented by the following publications. The themes on which the prof. Ruocco was mainly dedicated in the course of his scientific activity are the PHENOM- ENA OF TRANSPORT (momentum, heat, mass), both in environmental and industrial applications. The research was carried out by developing the methodological and applicative aspects through both experimental and numerical investigations. Most of his research has been carried out under national projects funded by the Ministry of University. In 2004 prof. Ruocco founded the research group CFDfood, in order to pursue innovation in engineering food through experimental and computational innovative methodologies. In 2010 prof. Ruocco founded the group CFDINNOVA, which is currently under evaluation for transformation into an academic spin-off. Complete List of Publications Impact analysis of Authorship, executed on 3/19/2013 through excluding selpf-citations Documents: 33, Citations/document: 4.24; h-index: 7; normalized h-index (with respect to full professorship h-index, sector 09/C2): 1.75 Total: 31 International Journals 1 V.P. Manno & G. Ruocco, A performance model of bubbling fluidized bed hydrodynamics, Powder Technology (59) A. Carotenuto, F. Reale & G. Ruocco, Thermal storage from aquifers as energy recovery for space heating and cooling, Heat Recovery Systems & CHP 10 (5/6) A. Carotenuto, F. Reale & G. Ruocco, Heat transfer exchange in a multicavity volumetric solar receiver, Solar Energy 46 (4) A. Carotenuto, F. Reale, G. Ruocco, U. Nocera & F. Bonomo, Final design of a multicavity volumetric solar receiver, Solar Energy Materials A. Carotenuto, F. Reale, G. Ruocco, F. Bonomo & U. Nocera, Thermal behaviour of a multi cavity volumetric solar receiver: design and tests results, Solar Energy 50 (2) O. Manca, V. Naso & G. Ruocco, Effects of temperature-dependent properties on the heat conduction in a semi-infinite medium subjected to a pulsed heat source, The American Society of Mechanical Engineers - Heat Transfer Division O. Manca, S. Nardini, V. Naso & G. Ruocco, Experiments on natural convection and radiation in asymmetrically heated vertical channel, The American Society of Mechanical Engineers - Heat Transfer Division G. Ruocco, Entropy generation in conjugate heat transfer from a discretely heated plate to an impinging confined jet, International Communications in Heat and Mass Transfer (24) G. Ruocco, Impinging jet cooling of a discretely heated conductive board: heat transfer and fluid flow, International Journal of Heat & Technology (15) E. Nino & G. Ruocco, Experimental investigation of the heat exchange to a compartmentalized plug flow, International Journal of Thermal Sciences (38) V. De Luca & G. Ruocco, A transient-spectral thermal model of soil under radiativeinterfering cover, Journal of Agricultural Engineering Research (77) S. Maruyama, E. Nino & G. Ruocco, Analysis of a thermoelectrical device for active heat transfer control, International Journal of Thermal Sciences (40) M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Flow field analysis in a ventilated large enclosure subject to non-homogeneous boundary conditions, Heat Transfer Engineering (24) Page 4 / 8 - Curriculum vitæ of

5 14 M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Simultaneous visualization of flow field and evaluation of local heat transfer by transitional impinging jets, International Journal of Heat and Mass Transfer (46) F. Sarghini & G. Ruocco, Enhancement and reversal heat transfer by competing modes in jet impingement, International Journal of Heat and Mass Transfer (47) M. Angioletti, E. Nino & G. Ruocco, CFD turbulent modeling in jet impingement and its validation by particle image velocimetry and mass transfer measurements, International Journal of Thermal Sciences (44) M. Corcione, E. Habib & G. Ruocco, Heat transfer features of a horizontal slot jet impinging in mixed convection, American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD M.V. De Bonis & G. Ruocco, Modelling local heat and mass transfer in food slabs due to air jet impingement, Journal of Food Engineering (78) C. Dirita, M.V. De Bonis & G. Ruocco, Analysis of food cooling by jet impingement, including inherent conduction, Journal of Food Engineering (81) M.V. De Bonis & G. Ruocco, A generalized conjugate model for forced convection drying based on an evaporative kinetics, Journal of Food Engineering (89) M.V. De Bonis & G. Ruocco, Conjugate fluid flow and kinetics modeling for heat exchanger fouling simulation, International Journal of Thermal Sciences (48) G. Carrieri, M.V. De Bonis, C. Pacella, A. Pucciarelli & G. Ruocco, Modeling and validation of local acrylamide formation in a model food during frying, Journal of Food Engineering (95) F. Marra, M.V. De Bonis & G. Ruocco, Combined microwaves and convection heating: A conjugate approach, Journal of Food Engineering (97) G. Carrieri, M. Anese, B. Quarta, M.V. De Bonis & G. Ruocco, Evaluation of acrylamide formation in potatoes during deep-frying: The effect of operation and configuration, Journal of Food Engineering (98) M.V. De Bonis & G. Ruocco, Heat and mass transfer modeling during continuous flow processing of fluid food by direct steam injection, International Communications in Heat and Mass Transfer (37) M.V. De Bonis & G. Ruocco, An experimental study of the local evolution of moist substrates under jet impingement drying, International Journal of Thermal Sciences (50) M. Pace, M.V. De Bonis, F. Marra & G. Ruocco, Characterization of a combination oven prototype: Effects of microwave exposure and enhanced convection to local temperature rise in a moist substrate, International Communications in Heat and Mass Transfer (38) G. Ruocco, M.V. De Bonis & F. Marra, Combining microwave and jet-impingement in a oven prototype, Procedia Food Science (1) G. Carrieri, M.V. De Bonis & G. Ruocco, Modeling and experimental validation of mass transfer from carbonated beverages in polyethylene terephthalate bottles, Journal of Food Engineering (108) M.V. De Bonis & G. Ruocco, Computational transport phenomena in bioprocessing with the approach of the optimized source term in the governing equations, Heat and Mass Transfer (48) M.V. De Bonis & G. Ruocco, Mass and heat transfer modeling of bio-substrates during packaging, Heat and Mass Transfer DOI /s Total: 6 National Journals 1 A. Carotenuto, F. Reale & G. Ruocco, Evaluation of the thermal performance of a multi-cavity volumetric solar receiver, Energie Alternative HTE 12 (63) A. Carotenuto, F. Reale & G. Ruocco, Utilizzazione di acque da corpi idrici sotterranei come serbatoi termici per macchine di climatizzazione, Condizionamento dell aria, 33 (3) A. Carotenuto, F. Reale, G. Ruocco, U. Nocera & F. Bonomo, Prestazioni di un ricevitore solare EFA, Energie Alternative HTE 12 (68) Page 5 / 8 - Curriculum vitæ of

6 4 G. Carrieri, M.V. De Bonis & G. Ruocco, A computational tool to verify acrylamide formation, Industrie alimentari 47 (476) M.V. De Bonis, G. Carrieri, G. Ruocco, M. Cefola & S. Vanadia, Preservation processes prediction of vegetables in modified atmosphere, Industrie Alimentari 48 (491) G. Carrieri, M.V. De Bonis & G. Ruocco, La modellazione come strumento di analisi ed otimizzazione dello stoccaggio di bevande carbonate, Industrie delle Bevande 40 (236) Total: 20 Contributions in Books and International Conferences with Referee 1 O. Manca, V. Naso & G. Ruocco, Conjugate heat transfer to a laminar confined impinging planar jet, Advanced Computational Methods in Heat Transfer IV, ed. L.C. Wrobel, G. Comini, C.A. Brebbia, A.J. Nowak, Computational Mechanics Publications, Southampton, G. Altieri, V. De Luca & G. Ruocco, Buoyancy effects on conjugate heat transfer due to a laminar impinging jet: preliminary results. In 5th ASME-JSME Thermal Engineering Joint Conference AJTE 99 (San Diego, USA, Mar ) 3 M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Local Heat Transfer to Transitional Impinging Gaseous Jets. In 3rd European Thermal Science Conference, Eurotherm (Heidelberg, Germany, Sep ) 4 M. Cefola, M.V. De Bonis & G. Ruocco, Development of a local measurement of conjugate transport phenomena in foods due to air jet impingement. In Proceedings of the 6th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (Matsushima, Japan, Apr ) 5 M.V. De Bonis & G. Ruocco, Local heat and mass transfer in biomaterials due to air jet impingement: a CFD approach. In Proceedings of the Eurotherm Seminar 77-Heat and Mass Transfer in Food Processing (Parma, Italy, Jun ). Edizioni ETS, Pisa, Italy, M. Cefola, M.V. De Bonis, L. Massignan & G. Ruocco, Mass and heat transfer modelling of food in modified atmosphere. In Proceedings of the Eurotherm Seminar 77- Heat and Mass Transfer in Food Processing (Parma, Italy, Jun ). Edizioni ETS, Pisa, Italy, M.V. De Bonis, G. Altieri, M. Cefola & G. Ruocco, Combined transfer phenomena in 3D modelling of packaged foods. In Proceedings of the 4th International FOOD- SIM Conference (Naples, Italy, Jun ). EUROSIS-ETI Publication, Ghent, Belgium, M.V. De Bonis, C. Calamello & G. Ruocco, Fouling of heat exchangers in the dairy industry by coupling flow and kinetics modeling. In Proceedings of the 4th International FOODSIM Conference (Naples, Italy, Jun ). EUROSIS-ETI Publication, Ghent, Belgium, G. Carrieri, M.V. De Bonis, P. Lupattelli & G. Ruocco, Modeling and experimental validation of local acrylamide formation in fried food. In Proceedings of the 3rd International Symposium CIGR Section VI (Naples, Italy, Sep ). AIDIC, Milano, Italy, paper no M.V. De Bonis, G. Carrieri & G. Ruocco, Innovative computational fluid dynamics modeling of thermal treating to liquid food: bridging transport and kinetics. In Proceedings of the 3rd International Symposium CIGR Section VI (Naples, Italy, Sep ). AIDIC, Milano, Italy, paper no G. Carrieri, M.V. De Bonis & G. Ruocco, Multidimensional modeling of a toxical molecule formation during food frying, In Proceedings of the 2007 COMSOL Conference (Grenoble, France, Oct ). COMSOL, Stockholm, Sweden, Reactor Engineering and reactor design paper 12 M.V. De Bonis & G. Ruocco, A multiphysics approach to fundamental conjugate drying by forced convection, In Proceedings of the 2008 COMSOL Conference (Hannover, Germany, Nov ). COMSOL, Stockholm, Sweden, Reactor Engineering and reactor design paper 13 H.A. Vàquiro, M.V. De Bonis, G. Ruocco, C. Rossellò & J. Bon, Modelling intermittent drying processes. In Proceedings of the 16th International Drying Symposium (Hyderadabad, India, Nov ), paper no. 166 Page 6 / 8 - Curriculum vitæ of

7 14 H.A. Vàquiro, A. Mulet, M.V. De Bonis, G. Ruocco & J. Bon, Ultrasonically assisted intermittent drying for foodstuff: preliminary results. In Proceedings of the 4th Inter- American Drying Conference (Montreal, Canada, Aug ) 15 F. Marra, M.V. De Bonis & G. Ruocco, An integrated computational framework for combined microwave/convection treatment. In Proceedings of the IFT Annual Meeting (Chicago, USA, Jul. 2010) 16 M.V. De Bonis & G. Ruocco, A review of heat transfer simulations in food processing by an optimized kinetics approach, In proceedings of the ASME-ATI-UIT Conference on Thermal and Environmental Issues in Energy Systems (Sorrento, Italy, May, 2010) 17 F. Marra, M.V. De Bonis & G. Ruocco, Numerical modeling of drying aided by multiphysics mechanisms. In proceedings of the European Drying Conference - Eurodrying 2011 (Palma de Mallorca, Oct. 2011) 18 G. Ruocco & M.V. De Bonis, Food processing and control by air jet impingement. In: Handbook of Food Process Design, ed. J. Ahmed and M.S. Rahman. Wiley- Blackwell, Oxford, G. Ruocco, M.V. De Bonis & F. Marra, Modeling RF heating using computational fluid dynamics. In: Radio Frequency: Principles, Practice and Applications, ed. G. Awuah, H.S. Ramaswamy, and J. Tang. CRC, New York (in press) 20 G. Ruocco, In-silico experiments of conjugate momentum, heat and mass transfers. In proceedings of the VII Congreso Español de Ingenieria de Alimentos (Ciudad Real, Nov. 2012) Total: 22 National Conferences 1 P.G. Berardi & G. Ruocco, Campo radiativo in un mezzo assorbente, emittente e scatterante. Atti del 6 Congresso Nazionale sulla Trasmissione del Calore (Bari, 9-11 Giugno 1988) 2 C. Ianniello & G. Ruocco, Valutazione automatizzata della bontà della distribuzione del pubblico in sale da spettacolo. Atti del 17 Convegno Nazionale dell Associazione Italiana di Acustica (Parma, Aprile 1989) 3 G. Ruocco, Impinging jet cooling of a discretely heated conductive board: heat transfer and fluid flow, Atti del 16 Congresso Nazionale sulla Trasmissione del Calore (Torino, Jun ) 4 S. Maruyama, E. Nino & G. Ruocco, Analysis of a Thermoelectrical Device for Active Heat Transfer Control. Atti del 17 Congresso Nazionale sulla Trasmissione del Calore (Ferrara, Jun ) 5 E. Nino & G. Ruocco, Transfer Characteristics of an Axisymmetric Jet Impinging onto a Flat Plate. Atti del 17 Congresso Nazionale sulla Trasmissione del Calore (Ferrara, Jun ) 6 A. Albano, M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, LDV Measurements within a Ventilated Test Room. Atti del 18 Congresso Nazionale sulla Trasmissione del Calore (Como, Jun ) 7 A. Albano, M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Evaluation of local heat transfer and visualization of flow field due to impinging, transitional round jets. Atti del 19 Congresso Nazionale sulla Trasmissione del Calore (Modena, Jun ) 8 A. Albano, M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Flow field analysis in a ventilated large enclosure subject to non-homogeneous boundary conditions. Atti del 19 Congresso Nazionale sulla Trasmissione del Calore (Modena, Jun ) 9 R.M. Di Tommaso, E. Nino & G. Ruocco, Valutazione dei coefficienti di scambio termico locale e visualizzazione di getti gassosi impattanti su piastra piana. Giornate di studie della Associazione Italiana di Velocimetria Laser (Ancona, Nov ) 10 M. Angioletti, R.M. Di Tommaso, E. Nino & G. Ruocco, Extended visualization by PIV of impinging jets on a protrusion, and comparison with simulations. Atti del 20 Congresso Nazionale sulla Trasmissione del Calore (Maratea, Jun ) 11 R.M. Di Tommaso, M. Ferrara, E. Nino & G. Ruocco, Refractive index matching applied to a transparent plate heat exchanger. Atti del 20 Congresso Nazionale sulla Trasmissione del Calore (Maratea, Jun ) Page 7 / 8 - Curriculum vitæ of

8 12 M. Angioletti, E. Nino & G. Ruocco, Validation of CFD turbulent models in jet impingement by Particle Image Velocimetry. Atti del 21 Congresso Nazionale sulla Trasmissione del Calore (Udine, Jun ). Edizioni ETS, Pisa, Italy 13 G. Ruocco, Heat transfer enhancement and reversal by competing modes in jet impingement. Atti del 21 Congresso Nazionale sulla Trasmissione del Calore (Udine, Jun ). Edizioni ETS, Pisa, Italy 14 M.V. De Bonis & G. Ruocco, Innovation in thermal treating to liquid food based on the analysis of transport and kinetic phenomena. Atti del 22 Congresso Nazionale sulla Trasmissione del Calore (Genova, Jun ). Studio64 srl Edizioni Genova, Genova, Italy, M.V. De Bonis, G. Altieri & G. Ruocco, Simulation of an innovative system for postharvest cooling of oranges. Atti del 7 Congresso Italiano di Scienza e Tecnologia degli Alimenti - CISETA (Cernobbio, Sep ). Chiriotti Editori, Pinerolo, Italy, M.R. De Tommaso, M.V. De Bonis & G. Ruocco, The combination of biochemical notations and CFD in describing heat exchanger fouling during milk sterilization. Atti del 7 Congresso Italiano di Scienza e Tecnologia degli Alimenti - CISETA (Cernobbio, Sep ). Chiriotti Editori, Pinerolo, Italy, C. Dirita, M.V. De Bonis & G. Ruocco, Conjugate effect in food cooling by jet impingement: a numerical analysis. Atti del 24 Congresso Nazionale sulla Trasmissione Calore (Napoli, Jun ). Edizioni ETS, Pisa, Italy, M.C. Console, M.V. De Bonis & G. Ruocco, Fundamental analysis of local heat and mass transfer due to a round hot air impinging jet, Atti del 24 Congresso Nazionale sulla Trasmissione Calore (Napoli, Jun ). Edizioni ETS, Pisa, Italy, M.V. De Bonis, C. Dirita & G. Ruocco, Simulation and experimental validation of local heat and mass transfer by jet impingement. Atti del 25 Congresso Nazionale sulla Trasmissione Calore (Trieste, Jun ). Edizioni ETS, Pisa, Italy, M.V. De Bonis & G. Ruocco, Degradation kinetics of fluid bio-systems during direct steam thermization: preliminary results. Atti del 25 Congresso Nazionale sulla Trasmissione Calore (Trieste, Jun ). Edizioni ETS, Pisa, Italy, M.V. De Bonis, G. Carrieri & G. Ruocco, Submerged liquid jet impingement in biotechnology reactors. Atti del 26 Congresso Nazionale sulla Trasmissione Calore (Palermo, Jun ). Paper No M.V. De Bonis, G. Carrieri & G. Ruocco, Computational transport phenomena in food engineering: prespectives and case studies. Atti del 26 Congresso Nazionale sulla Trasmissione Calore (Palermo, Jun ). Paper No 45 Total: 5 Textbooks and Monographs 1 G. Ruocco, Hydrodynamic performance of a bubbling fluidized bed. M.S. dissertation thesis, Tufts University, Medford, Ma., G. Ruocco, Progetto e prova di un ricevitore volumetrico ad aria atmosferica: i meccanismi di scambio, caratterizzazione numerica e sperimentale. Tesi di Dottorato di Ricerca in "Ingegneria dei sistemi termomeccanici", IV ciclo, O. Manca, S. Nardini & G. Ruocco, Thermal design of natural convection in tilted channels with and without radiative effects. De Costanzo Editore, Napoli, G. Ruocco, Un introduzione alla Fisica Tecnica. Liguori Editore, Napoli, G. Ruocco, L energia pulita. In: Energia - problemi e prospettive, ed. E. Mariani, V. Del Giudice, V. Petraccone, G. Ruocco, E. Santamato. Istituto per ricerche ed attività educative, Napoli, 2005 Page 8 / 8 - Curriculum vitæ of