3.60 CEREC CONNECT INTERNET PORTAL EXPORT

Transcription

1 3.60 CEREC CONNECT INTERNET PORTAL EXPORT

2 Preparation: For posterior teeth you need to image from the farthest distal tooth on the quadrant through the canine. For anterior teeth image from bicuspid through bicuspid. Partial Bite: What we consider the antagonist on CEREC 3D. Take 3 images, 1 of the bite material, 1 of the distal neighbor and 1 of the mesial neighbor. The distal and mesial images must match in the prep and partial bite folders. Antagonist: These are images of the opposing arch. For posterior teeth take images from the farthest distal tooth on the quadrant through the canine. For anterior teeth image from bicuspid through bicuspid.

3 Check Models: Click on the Preparation, Partial Bite and Antagonist buttons to view the model of the images that were taken. If the multiple folders do not stitch, this step will not appear, it will keep you at your Optical Impression screen until there is enough information for the folders to stitch.

4 Trim Preparation: Trim as usual by cutting the distal and mesial neighbors out. (Some offices have had issues with the trim not cutting where the line is, if that occurs often, suggest they draw the trim line in a lasso around the prep area, this seems to work well.)

5 Preparation Margin: Draw the margin as usual. This is the last step before clicking on the Connect button to send. As always, after drawing the line check and make sure it has not fallen off anywhere. Be aware that even though this is the last step before sending, the green arrow will still be active. If you click the arrow it will erase your margin and you will be brought back to the Trim Preparation step. The icon is active in case you are doing a bridge and need to draw more margins. We have asked that this be changed on the next release or service pack.

6 Internet Portal Access: After clicking the Connect icon the Internet Portal Access Login box will display. The office will enter in their User name and Password and click OK.

7 Restoration Data Tab: In this tab the Patient Information and Digital Impression will come over automatically. You will need to select a Tooth Number on the model on the right. You will also need to choose what Restoration Type the case will be along with the Material you would like it milled on. Also be aware that the Stump Shade and Final Shade need to be filled in as well. Click on the Next Step arrow at the bottom right to continue to the next tab.

8 Desired Lab Tab: From this tab select the lab you wish to send the file to under My Favorite Lab. Also in this screen select a Return Date and a Return Time you wish to have the restoration case back. Click Next Step to go forward to the next tab or Previous Step to edit information on a previous page.

9 Additional Notes Tab: Enter any Additional Instructions in the text box provided. Additional Patient Data information can be filled out to enter the Gender and Age of the patient. Photos can also added, click on Browse to locate the patient images you wish to add. After the information has been added and you are ready to upload the file, click on the Add To Cart icon at the bottom or click Previous Step to go back and edit information on a previous tab.

10 Upload Screen: Afclicking the Add To Cart icon an upload status dialogue box will display. Please wait for the next screen to ter display while the file uploads.

11 After the file has been uploaded the software will prompt you to select Go To Cart, Add A New Order From A New Patient or Use Digital Impression Below To Order The Next Tooth (Quadrant). Select the radio button for the step you want and click on the Next Step arrow at the bottom right hand corner of the screen.

12 Cart: Once in the Cart dialogue box, it will display the Addresses where the restoration needs to be sent to when completed and the address where the lab should send the bill. The Order section shows the Order #, Patient Name, My Favorite Lab, Digital Impression, Additional Photos, Restoration Type, # of Units and Options so you can verify this is the correct file information that needs to be sent. Once confirmed that the information is correct, enter in the License Number and Password (use your CEREC Connect user name password), click Submit to send the file.

13 After the file has been sent you will receive a dialogue box stating your order has been sent successfully. Click on the Close button at the bottom to exit out.