Enhance Production in 6 Steps Using Preventive Maintenance

Transcription

1 Enhance Production in 6 Steps Using Preventive Maintenance 1

2 Enhance Production in 6 Steps Using Preventive Maintenance Preventive Maintenance (PM) is 30% less expensive than reactive approaches Using an effective PM program, plants can greatly reduce their machine failure rates Preventive maintenance eliminates downtime, prevents costly repairs and improves efficiency The ROI of Preventive Maintenance Production is complicated. After all, thousands of steps occur on the shop floor every shift all of which can have a material impact on the business and come to a grinding halt the moment our equipment stops working. For years, we have been hearing about Preventive Maintenance (PM) and while the proactive process is said to preclude downtime, we have been left to wonder: 1. Does it really work? 2. Can it save our facility time and money? Research within the industry certainly supports the benefits. In fact, it was recently shown that for every $1 spent to improve equipment reliability, there is a $5-10 return to the bottom line 1. This preventive approach to maintenance is approximately 30% less expensive than a reactive one 2. Let s take a look at why PM has such a positive impact and how, using the six steps described below, you can leverage Preventive Maintenance in your own facility. 1. Plan Ahead of Time From our youth, we have heard about the benefits of proper planning this principle stands just as firm on the factory floor. Without a plan in place to check and inspect equipment we are at the mercy of the machine. When it goes down we must stop production to fix it. The process wastes time, often halts manufacturing, and leads to rushing around as we try to control the issue as quickly as possible. There is a better option. The primary objective of PM is to create a simple yet efficient schedule to maintain equipment. The plan should state clear timelines to perform periodic maintenance and be assigned to a set of skilled technicians. With each technician focused on a specific machine(s) at a regular cadence, critical equipment can receive proper priority and maintain a maximum utility level. 2

3 Remaining reliability focused instead of repair focused, will maximize production and minimize the depreciation of your equipment over time. Planning ahead also helps to avoid increasing operations costs and ensures a maximum level of material is processed with high quality results. 2. Benchmark Your Process Maintenance schedules account for as much as 40% of the operational budget 3. Therefore, taking some time to get a realistic perspective of how our process compares to the industry can go a long way in determining the effectiveness of our efforts. Adding credibility to that is an industry case study from 2012 which found Preventive Maintenance significantly enhanced production. In addition to prioritizing critical equipment in the production flow for routine review, PM greatly reduced machine failure rates, ensuring uninterrupted production 4. By evaluating real stories like this, and researching the industry, we can leverage proven practices to enhance our existing abilities. Seek the global leaders in your sector and see what they are doing today that you can apply in your own plant to create a more successful environment. This process will create a clear picture of strengths and opportunities, and take you one step further to an ideal PM program. 3. Set High Standards Planned maintenance leads to premier plant performance. The standards in our plants must be created in line with the goals we wish to accomplish. If you are working toward process improvement, Preventive Maintenance can help you to reduce: Repair Costs Equipment Failures Production Downtime Deterioration in Equipment These are significant achievements for any company. Mean time between failure (MTBF), a process used in many plants to provide accurate and comprehensive failure data, can also assist in bringing you closer to your goals. Working off a computerized maintenance management system (CMMS), the use of MTBF can be crucial in accomplishing your goal of extending equipment life, and is an important standard to consider. Likewise, predictive technologies that determine equipment failure are the key to reducing unplanned downtime, increasing operational efficiency and lowering the risk of expensive reactive work. 3

4 4. Get Executive Buy-in This is as straight forward as it sounds. If you want your Preventive Maintenance plan to work, it must be endorsed at the highest levels. Upper management should view the PM work system as necessary for production in the same way that any other function is essential. Furthermore, the management person directly responsible for Preventive Maintenance must monitor the quality and quantity of work as well as the results. Ongoing improvements should be part of an overall Continuous Improvement effort. This includes, but is not limited to, completing component failure analyses and reviewing all steps required to prevent any potentially subsequent failures. 5. Train the Team The key to successful implementation is to invest in training and improve knowledge at all levels. Preventive Maintenance is a process not a program. We must continue to evolve and optimize production in order to maximize the useful life of our equipment. Effectively executing that strategy requires the company to be on the same page and properly trained. Training the workforce and setting its expectations varies with the philosophies of the plant management of each facility. One thing remains certain: production employees are a significant part of PM systems. They can be, and many times are, the first to see changes in the equipment they operate. Therefore, the overall skill level of the workforce will determine how effective any Preventive Maintenance plan will be. If success is desired, the workforce must be prepared to execute a common philosophy. 6. Perform Ongoing Analysis This leads us to our final step which promotes the perspective that our work is not finished once we figuratively flip the switch with our Preventive Maintenance plan. We must close the loop as well. When an issue is uncovered, it should be addressed immediately and communicated properly. 4

5 Communication can happen in two forms: manual processes of sharing data or a continuous improvement process that provides real-time feedback between operations and management. If the latter is preferred, which it will be for most of us, then Manufacturing Operations Management software is required. Manufacturing Operations software closes the loop through: Real-time Interfacing Direct Database Access Messaging and Notification Automated Asset Management Maintenance SOP Document Retrieval This provides critical business intelligence about your manufacturing operations that can then be shared across the organization and used to improve your process. Understanding the real-time utilization, breakdowns, and run times of equipment will allow you to optimize maintenance and achieve greater visibility into your PM program. Creating a complete solution for maintenance should include a technology platform that can automate order generation, display SOP documents, and provide web-based visualization. Figure 1 TrakSYS Runtime Maintenance Dashboard 5

6 Figure 2 Response Time by Shift and Product Size Taking the Next Steps Preventive Maintenance is proven to eliminate downtime, prevent costly repairs, and improve operational efficiency. The next steps are to apply that knowledge and experience the benefits of a PM program. To accomplish that task, review the technology needed to set your system up for success. Put a Manufacturing Execution System in place to perform predictive maintenance and provide essential insight into the process for a simple and highly effective program. TrakSYS is a leading Manufacturing Operations Management system that significantly improves manufacturing execution, asset utilization, and production. To learn more about reducing the cost of maintenance, or to see a demonstration of the TrakSYS software, visit us online: 6

7 About Parsec Parsec Automation Corp. (Parsec) is the developer of TrakSYS, the leading real-time operations & performance management software. Manufacturing companies worldwide rely on Parsec for flexible and configurable tools to execute manufacturing operations across the value chain more effectively. Without production disruption, TrakSYS helps manufacturers to significantly improve asset utilization and efficiency, increase capacity with no new capital equipment, reduce production costs, decrease lead time, and improve profitability. With measureable ROI, TrakSYS fuels Lean, Six Sigma, TPM, and Operational Excellence efforts. For more information about Parsec, please visit the corporate website at References 1. Harris, T. (2009). Preventive Maintenance Strategy: What It Is, What It Does, and Why You Should Have One. Retrieved from 2. Reducing Operations & Maintenance Costs. Retrieved from siteadmincenter/pm%20central%20web%20documents/plantweb-ops-maint.pdf 3. Jacson, M. (2013). How Effective is Preventative Maintenance in Saving Money? Retrieved from Ab-Samat, H., Jeikuman, L., Basri, E. Harun, N. and Kamarudding, S. (2012). Effective Preventive Maintenance Scheduling: A Case Study. Retrieved from 5. Koo, W., Hoy, T. (2014). Determining the Economic Value of Preventive Maintenance. Retrieved from TM For proven results, contact Parsec now! Marketing@parsec-corp.com Copyright Parsec Automation Corp All trademarks are the property of their respective owners. 7