Data Centre solutions Enhanced Data Centre infrastructure

Transcription

1 Standard Data rack Centre system solutions (SRS) Capabilities Brochure Model DCS14/001 Data Centre solutions Enhanced Data Centre infrastructure

2 Eaton and Cooper united. Energizing a world that demands more. Discover today s Eaton. Powering business worldwide As a As global a global diversifi diversified ed power power management company, company, we we help help customers worldwide manage manage the the power power needed needed for for buildings, aircraft, aircraft, trucks, trucks, cars, cars, machinery and and businesses. Eaton s Eaton s innovative technologies help help customers manage manage electrical, electrical, hydraulic hydraulic and and mechanical power power more more reliably, reliabily, effi efficiently, safely safely and and sustainably. 2 EATON Data Centre Solutions

3 Standard Contents rack system (SRS) Data Centre solutions Eaton energising a world 2 Contents 3 Our capabilities 4 How we can help you 5 Infrastructure solutions 6-7 Platform overview 8-9 Platform features Platform specification Rack technical specification SRS platforms Introduction Basic rack 20 Network rack 20 Active rack 21 Active+ rack 21 Switch rack 22 Switch+ rack 22 Closed loop rack 23 Cabling rack 23 SRS - family table 24 SRS - part number configuration 25 ARS platforms Introduction Basic rack 28 Network rack 28 Active rack 29 Active+ rack 29 Switch rack 30 Switch+ rack 30 Closed loop rack 31 Cabling rack 31 ARS - family table 32 ARS - part number configuration 33 DRS platforms Introduction Basic rack 36 Network rack 36 Active rack 37 Active+ rack 37 Switch rack 38 Switch+ rack 38 Max Rack 39 Closed loop rack 39 Cabling rack 40 DRS - family table 41 DRS - part number configuration 42 Specialist racks Introduction 43 Distribution racks 44 Co Locate/Multi hosting rack into 2 racks ARS - HD-copper cabling & HD-fibre cabling racks 51 DRS - HD-copper cabling & HD-fibre cabling racks 52 2 Post rack system SRS - speciality family & configuration tables 57 ARS - speciality family table 58 ARS - speciality part number configuration 59 DRS - speciality family table 60 DRS - speciality part number configuration 61 Accessories in-rack Introduction 62 General 63 Earthing 64 Cable management in-rack Thermal management in-rack Shelving 73 Security Power distribution in-rack Rack intelligence Thermal management Introduction 86 Passive air Active air Cooling systems Power distribution Overview 97 Data Centre whitespace 98 Other power distribution products 99 Cable management Overview 100 EATON Data Centre Solutions 3

4 Our capabilities Eaton s B-Line Business has over 50 years of experience in providing engineered solutions for Data Centres. Throughout this time, we have witnessed the constant change in IT equipment that puts additional demands on the physical infrastructure of a Data Centre. Data Centres are designed to last 20 plus years, however IT upgrades will necessitate major changes are regularly made during this time. The following guide brings together all of our standard Data Centre solutions in a way that matches the business needs of the diverse range of Data Centre customers. Eaton s B-Line Business has a comprehensive range of products that address the needs of all types of Data Centres businesses from small data closets to large multi megawatt facilities. As there is no such thing as a standard Data Centre, B-Line s standard is to meet the challenges of most Data Centre needs. However, should you require a product or solution not specifically shown in this guide, please contact us to arrange a call with one of our certified Data Centre experts. 4 EATON Data Centre Solutions

5 Standard How we can rack help system you (SRS) Although projects can differ significantly, the return on capital (ROC) is often a complex trade-off involving initial capital (CAPEX), the total cost of ownership (TCO) and operating expense (OPEX). What s your challenge? Physical Infrastructure Adaptability - Data Centres will evolve and change significantly throughout their typical 20 years of beneficial operation. Eaton s B-Line Business has a range of cost-effective flexible solutions, from racks to cable management, specifically designed to be reconfigurable and upgradeable throughout the life of your Data Centre. Scalability - What is your Data Centre business model? Technology will drive a repurposing of your Data Centre every 3 to 5 years. Whatever your need, our Data Centre application team is ready to assist in helping you find the ideal solution to cater for your initial and future state needs. Design Robustness - Eaton s B-Line Business products are designed and manufactured in the UK to all recognised international standards. With over 50 years of experience and multiple accreditations, our products are designed to meet the most exacting performance needs and ensure that IT infrastructure is secure and protected. Power - Ensuring you can protect, deliver, manage and monitor power and energy throughout the entire Data Centre is critical to IT services availability and operational efficiency. Cooling - Virtually every kw of electrical energy consumed by IT equipment is transformed to heat. Managing heat is critical in avoiding downtime, reducing energy consumption and ultimately improving PUE. Eaton s B-Line Business offers a comprehensive range of air management, active and passive cooling products to suit any Data Centre application. Monitoring - You can t manage what you can t measure. Eaton s B-Line Business range of monitoring solutions supports the management of Data Centre power and the cooling of critical equipment, automatically ensuring high availability, optimum environment and operating costs. Security - Data is your most valuable asset and securing it is a priority. Whether you are an Enterprise, Managed Service, or Multi Hosting Data Centre, Eaton s B-Line Business has a range of security products to secure everything from cables to your entire whitespace installation. At Eaton s B-Line Business we are committed to helping our customers solve the complex questions. On the following pages you will understand how our products and services come together to form our Enhanced Data Centre infrastructure solution. Our objective is to provide superior products and services to contribute to your business success. Our products Access to a comprehensive range of rack and infrastructure solutions: - Pre-configured designs to help with product selection - For major projects, a complete range of product configuration tools to tailor our products to your specific needs Comprehensive accessory products to cater for: - Cooling and Air Management - Critical Power - Monitoring and Access Control - Security Our services Advice on EU code of conduct and how we can help improve operating efficiency. Project design reviews including financial modelling and benefit analysis. Project support services including: - Site surveys and layout optimisation - Prince II project management Comprehensive technical support documentation including data sheets and submittal drawings and individual project catalogues. Access to our DCDA trained applications and engineering teams to help you make the tough decisions. EATON Data Centre Solutions 5

6 Infrastructure Standard rack system solutions (SRS) Making an informed choice Eaton s B-Line Business has a comprehensive range of products that address the needs of all types of Data Centres businesses from small data closets to large multi megawatt facilities. The following guide brings together all of our standard Data Centre solutions in a way that matches the business needs of the diverse range of Data Centre customers. Rack Platforms Standard SRS Access ARS Delta 3 DRS Network room - DC1 Power consumption <15kW Gateway to the internet or internal Data Centre IT manager is the sole decision maker Becoming more critical with Cloud computing DC1 SME business - DC2 Power consumption 20-50kW Data Centre is in a mixed use building Not experts at Data Centre management Some are moving to Cloud and hosted Data Centres DC2 Large traditional - DC3 Power consumption 500kW - 5mW Risk adverse - highly redundant Data Centres Will throughly evaluate new technology Most build or refresh infrequently DC3 Multi-tennant - DC4 Power consumption 1-20mW Unpredicatable power and cooling needs Different business models Largest firms manage >1M ft 2 DC4 Cloud / Virtual Computing - DC5 Power consumption 3-30mW Most build or refresh infrequently Will throughly evaluate new technology Risk adverse - highly redundant Data Centres DC5 6 EATON Data Centre Solutions

7 Standard rack system (SRS) Most applicable Least applicable Speciality racks Thermal management Power management Cable management Co Locate 3 into 2 Distribution HD Copper HD Fibre Passive Cooling Active Cooling Basic Intelligent In Rack Outside Rack SRS, ARS, DRS versions ARS, DRS versions ARS, DRS versions ARS, DRS versions SRS, ARS, DRS versions ARS, DRS versions ARS, DRS versions ARS, DRS versions SRS, ARS, DRS versions ARS, DRS versions ARS, DRS versions ARS, DRS versions SRS, ARS, DRS versions ARS, DRS versions ARS, DRS versions ARS, DRS versions SRS, ARS, DRS versions ARS, DRS versions ARS, DRS versions ARS, DRS versions EATON Data Centre Solutions 7

8 Platform - overview STANDARD RACK SYSTEM (SRS) - Page the cost effective solution Today s competitive data market requires cost effective solutions. Eaton s B-Line Business Standard Rack System (SRS) is a fully featured, Data Centre compliant, 4-post rack designed to provide a cost-effective solution while meeting the demands of most data room applications. ACCESS RACK SYSTEM (ARS) - Page for uncompromised accessibilty A long-established solution, Eaton s B-Line Business Access Rack System (ARS) continues to provide the best working and cabling accessibility to optimise cabling density and minimise installation costs. Designed and manufactured in the UK, ARS boasts the broadest range of solutions for Data Centres and Telecomms. DELTA 3 RACK SYSTEM (DRS) - Page reconfigurability and remediation Eaton s B-Line Business Delta 3 Rack System (DRS) offers the optimum infrastructure solution for Data Centre whitespace. Designed to meet the demands of ever increasing equipment density while maintaining the benefits in cabling access and ease of installation associated with ARS. DRS is designed for reconfigurability and remediation, to grow and to change as the IT environment and your Data Centre needs evolve. 8 EATON Data Centre Solutions

9 PLATFORM SPECIFICATION Standard (SRS) Access (ARS) Delta 3 (DRS) Platform technical specifications Static load rating 1,000kg 1,000kg 1,500kg Dynamic load rating 225kg 750kg 750kg Ingress protection rating IP20 IP20 IP20 Flat pack option Yes Yes Yes Standard warranty 12 months 12 months 12 months 42U Height options 47U 52U - 600mm Width options 800mm Depth options Standard finish PLATFORM COMPLIANCE Standards & directive compliance PLATFORM SYSTEM RANGE Applications Earthing and power distribution Access control and monitoring Aisle containment Air management and cooling 1000mm mm mm mm 1200mm 1400mm - - Light grey - Light grey & blue - - Black - EIA 310-E - BS EN60950: BS EN : IEC IEC IEC UL 94V0 - UL listed CE complient - WEEE directive - Basic rack - Network rack - Active rack - Switch rack - Cabling rack - Distribution rack - - Co Locate rack - 3 into 2 rack - - Earthing & bonding - Standard PDUs - Metered PDUs - Intelligent PDUs - In rack UPS - Combination locks - Electronic locking - Intelligent locking - Environmental monitoring - KVM - Hinged doors Basic sliding doors - - Dual sliding doors Auto sliding doors Fixed roof panels - Auto roof panels Fan trays - Passive ducted cooling - Active ducted cooling - In rack heat exchangers - In row heat exchangers Recommended & fully compatible Available and compatible EATON Data Centre Solutions 9

10 Platform - features General racks General rack applications The configuration of the rack is often critical to the effective and efficient operation of the hosted equipment. With a wide range of feature options it can sometimes be a challenge to define what is actually needed or which configuration provides the optimal solution. Using the expertise gained from over 50 years of experience supplying technical enclosures for the data market, Eaton s B-Line Business has developed a range of application led rack platforms to help shorten and simplify the decision making process. Further, many of the application configurations follow industry best practices offering best in class operation and efficiency. We know that application demands change over time so all of our rack platforms and application solutions are modular allowing reconfiguration at any time of the rack s life cycle. Basic Rack Network Rack Active or Active+ Rack Available in 600mm and 800mm wide variants the Basic Rack is usually configured with solid doors front and rear. With the solid doors limiting air flow through the rack a Basic Rack has the capability to support active equipment densities of up to 1.5kW, subject to the room environment*. A Basic Rack has limited overhead service entry points, typically offering entry points capable of servicing cabling volumes of around 120 cables, with optional accessories available to support backbone or patch cabling as appropriate. The base of the rack is typically open and the rack is usually configured with fixed feet. A Basic Rack configuration typically provides the lowest cost configuration option but also has the lowest application flexibility. Available in both 600mm and 800mm wide variants, a Network Rack differs from a Basic Rack in that it is typically configured with vented doors front and rear. Configuring the rack with vented doors allows greater air flow through the rack space, increasing the rack s ability to cope with active equipment densities to around 3kW per rack*. With regards to cabling infrastructure the Network Rack is configured to accept overhead cabling volumes of up to 120 cables and like the Basic Rack has an open base with fixed feet. A Network Rack configuration typically provides greater application flexibility at a moderately higher cost when compared to the Basic Rack. With equipment densities on the rise this configuration provides a more future proof option. The Active Rack and Active+ Rack is a 600mm wide rack configured for conventional server hosting, where the cooling air flow operates in a front to rear direction. The Active Rack is configured with single vented doors front and rear, whilst the Active+ Rack has double vented doors fitted at the rear making it ideal for applications where space may be limited. The Active Rack and Active+ Rack configurations include internal air management baffles promoting the segregation of the cold air feed from the hot air return and the avoidance of hot spots. Air segregation offers improved system efficiency by ensuring the cold air reaches the equipment at the lowest temperature, which promotes improved cooling capabilities, facilitating the housing of equipment densities of up to 5kW per rack*. Overhead service entry points are configured to allow data and power entries to be segregated in volumes of up to 120 cables. An Active Rack or Active+ Rack configuration typically provides for systems with moderate equipment density capabilities for efficient system operation. These configurations also provide the ideal basis for upgrade to contained aisles, offering further improvements in operational efficiency. *Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC EATON Data Centre Solutions

11 Standard rack system (SRS) Cabling Rack Closed Loop Rack Max Rack Switch+ Rack Switch Rack Active+ Rack Active Rack Network Rack Basic Rack Switch or Switch+ Rack Max Rack Cabling Rack The Switch Rack and Switch+ Rack configurations are 800mm wide racks, arranged to deal with multi directional cooling demands, often encountered with network switches, where cooling equipment strategies run front to rear as well as left to right. Switch Racks are configured with single vented doors at the front and double vented doors at the rear and the Switch+ Rack is configured with double vented doors front and rear. Like the Active Rack variants, the Switch Rack and Switch+ Racks incorporate internal air management baffles designed to be able to cope with a mixture of styles of active equipment, whilst still supporting equipment densities of up to 5kW per rack*. Like the Active Rack the Switch Rack and Switch+ Rack are configured to allow overhead data and power entries to be segregated. The default configuration allows the entry of around 120 cables but higher volumes can be accommodated if needed. Like the Active Rack the Switch Rack and Switch+ Racks are able to manage moderate equipment densities and provide the ideal basis for upgrade to contained aisles. The Max Rack is a 1000mm wide rack, specifically designed to support high density switching, backbone cabling and patching applications in a single rack envelope. The Max Rack is configured as standard with double vented doors front and rear, and with internal air management baffles that can support equipment loads of up to 5kW*. The Max Rack configuration offers extensive cable and thermal management features providing the ideal specification to handle multi directional aspiring switches as well as high density cabling support. Designed for dedicated network switch hosting, the Max Rack provides an optimised environment for high density switch applications. The Cabling Rack is a 800mm wide rack, typically configured with solid doors front and rear with the facility to accommodate active equipment densities of up to 1.5kW*. As most cabling structures are passive there is little need to provide higher levels of cooling capability, afforded with vented doors, indeed vented doors in this application could lead to poor installation efficiency. Cabling Racks are configured with overhead service entry points designed to accommodate cabling volumes of more than 120 cables, with optional accessories available to support backbone or patch cabling as appropriate. The Cabling Rack configuration provides the ideal specification for moderate density cabling application, promoting optimum system efficiency. *Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC9.9 EATON Data Centre Solutions 11

12 Platform - features Specialised rack applications Speciality racks In today s industry there are a number of benefits that can be achieved by deploying a single rack platform into a data room environment. These can include: A single look and feel undoubtedly improves the aesthetics of the installation. If you have customers visiting the facility what is the first thing they see in the data room? The ability to easily mix and match rack configuration in a common environment without compromising operational efficiency which in turn helps to lower operational costs. This includes the ability to make common air management schemes, such as aisle containment, across a range of different rack applications. The ability to easily adapt racks to other application formats, providing greater long term flexibility and avoiding the need to prematurely obsolete and replace racks. Commonality enables tighter control and helps simplify the documented change processes. Research shows that human error continues to be one of the top causes of network failures. Common product, simplifies maintenance and reduces spares inventories. Eaton s B-Line Business has over the years developed a range of dedicated speciality rack designs to meet the demands of many uncommon applications. Although these rack designs may be deployed in small numbers they can make the difference to the overall system capability. Importantly they enable installations to be designed and deployed using a single rack platform, leveraging the benefits highlighted above. Distribution Rack HD Copper Cabling Rack HD Fibre Cabling Rack The Distribution Rack is an 800mm wide rack with no external cladding, providing the ideal solution for applications where security is managed at room level rather than at rack level. It can provide a viable alternative to conventional 2-Post or 4-Post racks, whilst still offering the ability to re-configure to another application later. Being an open structure, the Distribution Rack can cope with moderate to high density cabling applications with optional accessories to support backbone and patching structures. Designed to support network switch environments where equipment loads are up to 1.5kW*. Ideally suited to stand-alone applications or dedicated application zones, the Distribution Rack configuration has limited air management capabilities and is not suitable in a hot and cold aisle configuration. A HD Copper Cabling Rack is an 900mm wide by 500mm deep rack with a single sided 19 mounting configuration. The additional rack width provides increased space down each side of the rack allowing over 1,000 network port connections per rack envelope. They provide a unique working and access environment that saves installation time and on-going systems management, especially for newer, higher speed copper cabling technologies. The 500mm deep foot-print allows for two high density racks to be configured back to back in a 1,000mm deep footprint. Based on the same footprint as the HD Copper Cabling Rack the HD Fibre Cabling Rack also has a single sided 19 mounting facility. In the HD Fibre Cabling Rack configuration the 19 mounting facility is offset to the left of the rack, providing increased space on the right hand side of the rack to accommodate and manage larger cable volumes whilst ensuring cable integrity by managing increased cable bend radii requirements. Like the HD Copper Cabling Rack two fibre cabling racks can positioned back to back in a 1000mm deep footprint. *Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC EATON Data Centre Solutions

13 2 Post Rack 4 Bay Co Locate 2 Bay Co Locate 3 into 2 Rack Active 3 into 2 Rack Standard 3 into 2 Rack Frame HD Fibre Cabling Rack HD Copper Cabling Rack Distribution Rack 3 into 2 Rack 2 & 4 Bay Co Locate Rack 2 Post Rack A totally unique space saving system the 3 into 2 Rack is designed to maximise the amount of available U space within a Data Centre or IT environment. The 3 into 2 Rack is based on two 800mm wide racks adapted to allow three pairs of compact 19 rails to be fitted. Typically shipped as two separate 800mm wide racks, which are easily bayed together on site. Ideal for applications where space is limited, including containerised configurations, the 3 into 2 Rack can offer up to 11% more U mounting space when compared to conventional bayed rack configurations. Designed specifically for co location / multi hosting Data Centres the 2-Bay Co Locate Rack and 4-Bay Co Locate Rack provide segregated compartments or bays in a single rack foot-print. Typically configured with vented doors front and rear, the individual bays or compartments can support total rack active equipment loads of up to 5kW* (2.5kW for each bay on a 2-Bay configuration and 1.25kW for each bay on a 4-Bay configuration). Each compartment or bay is configured to be individually managed with separate cable channels and combination locks providing individual bay security. The Co Locate rack configuration allows for service providers to offer rack solutions to customers who do not need a full rack solution. This maximises available space, power and cooling while increasing Total Cost of Ownership (TCO) of the Data Centre whitespace. The 2 Post Rack is a basic rack structure, providing effectively one pair of fixed 19 rails secured to the floor with a simple floor mounting bracket. Typically used as an alternative to the Distribution Rack, the 2 Post Rack is primarily designed for moderate to high density cabling applications, including network switch mounting. These racks are typically available with a range of accessories to support vertical backbone and patch management, including options such as single sided or double-sided vertical cable channels. They are not ideally suited to server type applications as many server configurations typically require four point mounting. The open configuration means that the racks lend themselves to applications where security is managed at room level rather than at rack level. Unit level security options are readily available as common accessories and can be deployed to protect individual system installations including switches and patch panels. Typically suited to network switch type active environments where equipment loads are up to 1.5kW*. Ideally suited for stand-alone applications or dedicated application zones, the 2 Post Rack configuration has limited air management capabilities and can compromise installations if deployed in a hot and cold aisle configuration. They can be bayed together in multiples with cable management mounted between bayed racks. *Equipment heat load density indications assume the room environment is operating within the bounds of the recommendations as detailed by ASHRAE TC9.9 EATON Data Centre Solutions 13

14 Platform - specifications Rack Application Platform Basic Rack Network Rack Active Rack Active+ Rack Width mm Equipment compatibility Backbone cabling Patch cabling Front to rear aspiring active equipment (SERVERS) Multi directional aspiring active equipment (SWITCHES) <120 cables >120 cables <120 cables >120 cables kw kw kw kw kw kw Incoming services and space Thermal management Security Base data cable entry Overhead data cable entry Volume overhead cable entry Base power entry Overhead power entry Upgradable top panels Suit narrow aisle widths < 1000mm Glazed and steel door % vented doors fitted Double doors fitted front Double doors fitted rear Roof fan tray compatible Air baffles fitted as standard Front to rear rack air cooling Multi directional rack air cooling - Ducted cooling upgrade option Aisle containment compatible High density open loop cooling compatible - - High density closed loop cooling compatible - - Contained aisle high density cooling compatible - - Latching side panels Doors fitted Standard key locking Mechanical combination locks Upgradable locking 14 EATON Data Centre Solutions

15 Switch Rack Switch+ Rack Max Rack Cabling Rack Distribution Rack HD Copper Cabling Rack HD Fibre Cabling Rack 3 into 2 Rack 2-Bay Co-Locate Rack 4-Bay Co-Locate Rack EATON Data Centre Solutions 15

16 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN MILLIMETERS. ALL DIMENSIONS AND TOLERANCES ARE PER ASME Y14.5M-1994 THIS DRAWING AND/OR THE TECHNICAL INFORMATION CONTAINED HEREON IS THE PROPERTY OF COOPER B-LINE, INC. ("B-LINE"), AND IS ISSUED IN CONFIDENCE FOR B-LINE ENGINEERING PURPOSES ONLY AND MAY NOT BE REPRODUCED OR USED FOR ANY PURPOSE WHATSOEVER WITHOUT THE EXPRESS WRITTEN PERMISSION OF B-LINE TO THE USER. THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE PROPERTY OF B-LINE AND IS LOANED FOR MUTUAL ASSISTANCE, TO BE RETURNED WHEN ITS' INTENDED PURPOSE HAS BEEN SERVED. UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN MILLIMETERS. ALL DIMENSIONS AND TOLERANCES ARE PER ASME Y14.5M-1994 THIS DRAWING AND/OR THE TECHNICAL INFORMATION CONTAINED HEREON IS THE PROPERTY OF COOPER B-LINE, INC. ("B-LINE"), AND IS ISSUED IN CONFIDENCE FOR B-LINE ENGINEERING PURPOSES ONLY AND MAY NOT BE REPRODUCED OR USED FOR ANY PURPOSE WHATSOEVER WITHOUT THE EXPRESS WRITTEN PERMISSION OF B-LINE TO THE USER. THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE PROPERTY OF B-LINE AND IS LOANED FOR MUTUAL ASSISTANCE, TO BE RETURNED WHEN ITS' INTENDED PURPOSE HAS BEEN SERVED. Rack technical specifications REV SRS Dimensions DESCRIPTION REVISION BY DATE CHANGE NO. 00/00/07 CBH- Sheet1 DIM A DIM C Cabinet size Dim B mm Height U Width mm 42U U 800 Depth mm 800 Dim A mm + Jacking foot + Castors + Plinth Dim C mm Weight kg DIM B 47U U * 600W cabinet configured - vented front & vented rear * 800W cabinet configured - vented front & double vented rear REV: MODEL SOURCE FILE: FUSION 600W ACTIVE RANGE MATERIAL: FINISH: NA mm NA TOLERANCES UNLESS OTHERWISE SPECIFIED: XXX XXX.X ANGLE: BENDS: DO NOT SCALE DRAWING ARS Dimensions REV TITLE: DESCRIPTION DWG NO: REVISION BY Walrow Industrial Estate Highbridge, Somerset England TA9 4AQ SRS CABINET OVERALL DIMENSIONS & WEIGHTS SRS-OD DRAWN BY: CHECKED BY: DATE: SIZE: SHEET: WT/PC: SEE TABLE DA JL 20/01/2014 A3 1 OF 2 DATE 00/00/07 REV: CHANGE NO. CBH- Sheet1 DIM A DIM C Height U Cabinet size Width mm 42U U 800 Depth mm 875 Dim A mm Dim B mm + Skids + Castors + Plinth Dim C mm Weight kg DIM B 47U U U U 800 REV: MATERIAL: VEE SIZE: RAD VEE NA mm TITLE: ANGLE: 0.5 ARS CABINET BENDS: 0.5 * 600W cabinet configured - vented front & vented OVERALL rear DIMENSIONS & WEIGHTS FINISH: * 800W cabinet configured - DO vented NOT SCALE front DRAWING& double vented rear NA DWG NO: REV: ARS-OD MODEL SOURCE FILE: WEIGHT - TEST - 600w ACCESS CABINET TOLERANCES UNLESS OTHERWISE SPECIFIED: XXX 0.5 XXX.X 0.1 INTERNAL RAD R2 = 16mm VEE INTERNAL RAD R4 = 25mm VEE Walrow Industrial Estate Highbridge, Somerset England TA9 4AQ DRAWN BY: CHECKED BY: DATE: SIZE: SHEET: WT/PC: SEE TABLE DA JL 16/01/2014 A3 1 OF 2 16 EATON Data Centre Solutions

17 UNLESS OTHERWISE SPECIFIED, ALL DIMENSIONS ARE IN MILLIMETERS. ALL DIMENSIONS AND TOLERANCES ARE PER ASME Y14.5M-1994 THIS DRAWING AND/OR THE TECHNICAL INFORMATION CONTAINED HEREON IS THE PROPERTY OF COOPER B-LINE, INC. ("B-LINE"), AND IS ISSUED IN CONFIDENCE FOR B-LINE ENGINEERING PURPOSES ONLY AND MAY NOT BE REPRODUCED OR USED FOR ANY PURPOSE WHATSOEVER WITHOUT THE EXPRESS WRITTEN PERMISSION OF B-LINE TO THE USER. THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE PROPERTY OF B-LINE AND IS LOANED FOR MUTUAL ASSISTANCE, TO BE RETURNED WHEN ITS' INTENDED PURPOSE HAS BEEN SERVED. Standard rack system (SRS) Rack technical specifications REV DRS Dimensions DESCRIPTION REVISION BY DATE CHANGE NO. 00/00/07 CBH- Sheet1 DIM A DIM B DIM C Height U Cabinet size Width mm 42U U 800 Depth mm 875 Dim A mm Dim B mm + Skids + Castors + Plinth Dim C mm Weight kg U U MATERIAL: 52U 600 NA mm REV: 00 MODEL SOURCE FILE: DELTA3-600W WEIGHT FINISH: TOLERANCES UNLESS 1000 Walrow Industrial Estate OTHERWISE SPECIFIED: Highbridge, Somerset XXX XXX.X 0.1 England TA9 4AQ TITLE: ANGLE: 1 DRS CABINET BENDS: OVERALL DIMENSIONS & WEIGHTS DO NOT SCALE DRAWING NA U SEE 800TABLE DWG NO: REV: DRS-OD 1000 DRAWN BY: CHECKED BY: DATE: SIZE: SHEET: DA2459 JL /01/ A3 1 OF WT/PC: * 600W cabinet configured - vented front & vented rear * 800W cabinet configured - vented front & double vented rear EATON Data Centre Solutions 17

18 Standard rack system (SRS) Standard racks being installed in a network room SME business Standard (SRS)... the cost effective solution Today s competitive data market requires cost effective solutions. Eaton s B-Line Business Standard Rack System (SRS) is a fully featured, Data Centre compliant, 4-post rack designed to provide a cost-effective solution while meeting the demands of most data room applications. 18 EATON Data Centre Solutions

19 Standard rack system (SRS) Standard SRS features Patented 4-post corner design Bolt together construction with flat packed options Static load rating 1000kg Supplied with two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet fitted as standard Earth bonding kit included as standard Earth bonding compliant EN Various door options to suit application Various roof options to suit application Available in standard light grey or black Jacking feet Castors Rack ID Secure point locking Handle options Adjustable rails Open frame structure Bolt together construction Load rating 1,000kg IP20 environmental rating Available assembled or flat packed Quick to assemble and easy to adjust Standard heights 42U to 47U Width 600mm and 800mm Depths 800mm, 1000mm, 1200mm Door features 3-point hinging Single and double door variants Vented doors incorporate 80% perforated open area section Locking options 3-point Espan locking as standard with keyed alike locks Upgrade options include: - Individually keyed locks - Mechanical combination locks - Electronic locking - Network configurable intelligent locking 4. Side panel features Key locking Lift off sides 5. Mounting technologies 19 square pierced rails 23 mounting option in 800W racks Full width mounting option in 800W racks Rails infinitely adjustable front to rear Fully EIA-310-E compliant 6. Top panel options Range of upgradable top infill panel options including vented, cable entry and fan tray panels Fully customer configurable EATON Data Centre Solutions 19

20 Standard rack system (SRS) SRS Basic - specification Included as standard: Example order code: SB PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Doors configured left hand (LH) hinged as standard Glazed front door Plain steel rear door Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Earth bonding kit Available in standard light grey or black Configuration Basic Rack Width mm Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SB 47U P S L J See pages 6-7 for platform application compatibilty SRS Network - specification Included as standard: Example order code: SN PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Doors configured LH hinged as standard Flat vented doors front and rear Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Earth bonding kit Available in standard light grey or black Configuration Network Rack Width mm Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SN 47U P S L J See pages 6-7 for platform application compatibilty 20 EATON Data Centre Solutions

21 Standard rack system (SRS) SRS Active - specification Included as standard: Example order code: SA PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Doors configured LH hinged as standard Flat vented front and rear door Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Air management baffle kit Earth bonding kit Available in standard light grey or black Configuration Active Rack Width mm 600 Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SA 47U P S L J See pages 6-7 for platform application compatibilty SRS Active+ - specification Included as standard: Example order code: SE PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Single doors configured LH hinged as standard Flat vented front door Double vented rear door Doors fitted with standard key locking swing handle with multi-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Air management baffle kit Earth bonding kit Available in standard light grey or black Configuration Active+ Rack Width mm 600 Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SE 47U P S L J See pages 6-7 for platform application compatibilty EATON Data Centre Solutions 21

22 Standard rack system (SRS) SRS Switch - specification Included as standard: Example order code: SS PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Single doors configured LH hinged as standard Flat vented front door Double vented rear door Doors fitted with standard key locking swing handle with multi-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Air management baffle kit Earth bonding kit Available in standard light grey or black Configuration Switch Rack Width mm 800 Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SS 47U P S L J See pages 6-7 for platform application compatibilty SRS Switch+ - specification Included as standard: Example order code: SP PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Double vented doors front and rear Doors fitted with standard key locking swing handle with multi-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Air management baffle kit Earth bonding kit Available in standard light grey or black Configuration Switch+ Rack Width mm 800 Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SP 47U P S L J See pages 6-7 for platform application compatibilty 22 EATON Data Centre Solutions

23 Standard rack system (SRS) SRS Closed loop - specification Included as standard: Example order code: SL PSGJ Two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Doors configured LH hinged as standard Glazed front door Plain steel rear door Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel rear, all other panels are plain Plain locking side panels both sides Air management baffle kit Earth bonding kit Available in standard light grey or black Configuration Closed loop Rack Width mm Configuration see page 25 Application Depth mm 1200 Build Sides Colour Base 42U P S L J SL 47U P S L J See pages 6-7 for platform application compatibilty SRS Cabling - specification Example order code: SC PSGJ Included as standard: Two pairs of 19 mounting rails Front mounting rails fitted with cable management fingers Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Jacking feet Doors configured LH hinged as standard Glazed front door Plain steel rear door Doors fitted with standard key locking swing handle with 3-point locking Top panels configuration: basic brush entry panel all positions Plain locking side panels both sides Earth bonding kit Available in standard light grey or black Note: Can be configured with B-Line's high density in-line cooling modules, providing high cooling density single racks or pods. Please see thermal management section in this catalogue. Configuration Cabling Rack Width mm 800 Configuration see page 25 Application Depth mm Build Sides Colour Base 42U P S L J SC 47U P S L J See pages 6-7 for platform application compatibilty EATON Data Centre Solutions 23

24 Standard rack system (SRS) SRS - family table SRS Standard rack system SRS Basic SB Network SN Active SA Active+ SE Frame Frame configuration 4 post 4 post 4 post 4 post Doors Front door Glass Flat vented Flat vented Flat vented Rear door Plain steel Flat double vented Top cover - rear Brush strip panel Brush strip panel Brush strip panel Brush strip panel Roof Top cover - middle Top cover - front 1000 deep infill Plain full panel Plain full panel Plain full panel Plain full panel Top cover - front 1200 deep infill Air flow Top and bottom baffles Vertical baffles None None Fitted Fitted Cable support Twist & lock cable management arms Vert cable management fingers single (RCM) Cable spool arms Vert cable management fingers pair (RCM) None None None None SRS Standard rack system SRS Switch SS Switch+ SP Closed Loop SL Cabling SC Frame Frame configuration 4 post 4 post 4 post 4 post Doors Front door Flat vented Plain glazed Plain glazed Flat double vented Rear door Flat double vented Plain steel Plain steel Top cover - rear Brush strip panel Brush strip panel Brush strip panel Roof Top cover - middle Brush strip panel Top cover - front 1000 deep infill Plain full panel Plain full panel Plain full panel Top cover - front 1200 deep infill Plain full panel Air flow Top and bottom baffles Vertical baffles Fitted Fitted Fitted None Twist & lock cable management arms Cable support Vert cable management fingers single (RCM) None None None None Cable spool arms Vert cable management fingers pair (RCM) Fitted front 24 EATON Data Centre Solutions

25 Access Standard rack rack system (ARS) (SRS) SRS - part number configuration Width mm Standard Racks Application Depth mm Build Sides Colour Base 42U racks Basic SB 42U P S L J Network SN 42U P S L J Active SA 42U P S L J Active+ SE 42U P S L J Switch SS 42U P S L J Switch+ SP 42U P S L J Closed Loop SL 42U P S L J Cabling SC 42U P S L J 47U racks Basic SB 47U P S L J Network SN 47U P S L J Active SA 47U P S L J Active+ SE 47U P S L J Switch SS 47U P S L J Switch+ SP 47U P S L J Closed loop SL 47U P S L J Cabling SC 47U P S L J Example Order Code SL P S L J Type U Height Width Depth Build Sides Colour Base P = Assembled & palletised (non configured options) S = With sides B = Black C = Jacking feet & castors K = Flat packed N = Without sides L = Grey J = Jacking feet L = LH side only P = Plinth & jacking feet R = RH side only Q = Option P + castors EATON Data Centre Solutions 25

26 Access rack system (ARS) Typical arrangement for large traditional Data Centre - ducted fed cooling Access (ARS)... for uncompromised accessibilty A long-established solution, Eaton s B-Line Business Access Rack System (ARS) continues to provide the best working and cabling accessibility to optimise cabling density and minimise installation costs. Designed and manufactured in the UK, ARS boasts the broadest range of solutions for Data Centres and Telecomms. 26 EATON Data Centre Solutions

27 Access rack system (ARS) ARS features Patented centre post design Bolt together construction with flat packed options Static load rating 1000kg Supplied with two pairs of 19 mounting rails Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Nylon skids fitted as standard Earth bonding kit included as standard Earth bonding compliant EN Various door options to suit application Various roof options to suit application Available in 3 colour options: - light grey with blue trim - black with black trim - light grey with black trim Roof panel options Colour options Cable management HD cooling Ducted cooling Aisle containment Open frame structure Bolt together construction 1000kg static load rating IP20 environmental rating Quick and easy to adjust Standard heights 42U, 47U and 52U Widths of 600mm and 800mm Depths of 875mm, 1000mm, 1200mm Available assembled or flat packed Door features 2-point hinging Configurable left or right hinged Two point locking with upgrade locking options 1. Single and double door variants 3. Locking options Two point espan locking as standard with keyed alike locks Upgrade options include: - Individually keyed locks - Mechanical combination locks - Electronic locking - Network configurable intelligent locking 4. Side panel features Standard split half depth configuration Easier handling Quick release hinges Secure 5. Mounting technologies Rails fully adjustable front and rear 19 square pierced rails 23 mounting option in 800W racks Full width mounting option in 800W racks Fully EIA0310-E compliant 6. Top panel options Range of upgradable top infill panel options including vented, cable entry and fan tray options Modular top panel configuration EATON Data Centre Solutions 27

28 Access rack system (ARS) ARS Basic - specification Included as standard: Two pairs of 19 mounting rails Example order code: AB PSA Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Nylon skids Doors configured left hand (LH) hinged as standard Doors fitted with standard key locking swing handle with 2-point locking Doors fitted with quick release hinges Glazed front and plain steel rear door Quick release side panels both sides Top panels configuration: basic brush entry panel rear all other panels plain Earth bonding kit Available in standard light grey with blue or black trim or black with black trim Configuration Basic Rack Width mm Configuration see page 33 Application Depth mm Build Sides Colour Base 42U P S A AB 47U P S A 52U P S A See pages 6-7 for platform application compatibilty ARS Network - specification Included as standard: Two pairs of 19 mounting rails Example order code: AN PSA Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Nylon skids Doors configured LH hinged as standard Doors fitted with standard key locking swing handle with 2-point locking Doors fitted with quick release hinges Flat vented front and rear doors Quick release side panels both sides Top panels configuration: basic brush entry panel rear all other panels plain Earth bonding kit Available in standard light grey with blue or black trim or black with black trim Configuration Network Rack Width mm Configuration see page 33 Application Depth mm Build Sides Colour Base 42U P S A AN 47U P S A 52U P S A See pages 6-7 for platform application compatibilty 28 EATON Data Centre Solutions

29 Access rack system (ARS) ARS Active - specification Included as standard: Two pairs of 19 mounting rails Example order code: AA PSA Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Nylon skids Doors configured LH hinged as standard Doors fitted with standard key locking swing handle with 2-point locking Doors fitted with quick release hinge Flat vented doors front and rear Quick release side panels both sides Top panels configuration: basic brush entry panel rear all other panels are plain Air management baffle kit Earth bonding kit Available in standard light grey with blue or black trim or black with black trim Configuration Active Rack Width mm 600 Configuration see page 33 Application Depth mm Build Sides Colour Base 42U P S A AA 47U P S A 52U P S A See pages 6-7 for platform application compatibilty ARS Active+ - specification Included as standard: Two pairs of 19 mounting rails Example order code: AE PSA Unit height labels fitted to front and rear 19 mounting rails (numbered bottom to top) Nylon skids Single doors configured LH hinged as standard Doors fitted with standard key locking swing handle with 2-point locking Doors fitted with quick release hinge Flat vented doors front Double vented doors rear Quick release side panels both sides Top panels configuration: basic brush entry panel rear all other panels are plain Air management baffle kit Earth bonding kit Available in standard light grey with blue or black trim or black with black trim Configuration Active+ Rack Width mm 600 Configuration see page 33 Application Depth mm Build Sides Colour Base 42U P S A AE 47U P S A 52U P S A See pages 6-7 for platform application compatibilty EATON Data Centre Solutions 29