Airfield Ground Lighting Training from ADB

Transcription

1 Airfield. Our Field. Airfield Ground Lighting Training from ADB All persons involved in any activity, including management and maintenance activities, shall have the appropriate and verifiable training, technical knowledge, experience and qualifications relevant to the specific duties they have to perform. In particular, where involved in work on constant current series circuits, they shall be knowledgeable of the specific risks and the safety procedures involved in the work. Competency should be the major factor in the appointment of personnel and continuous assessment and training of each person should be undertaken to maintain competency levels IEC Maintenance of aeronautical ground lighting constant current series circuits The tasks of maintaining lighting aids should be entrusted only to reliable and skilled electricians who have had experience with high voltage series circuits and lighting. Training programs should be established to maintain the competence of maintenance personnel and to keep them abreast of new developments. ICAO Airport Services Manual Part 9- Airport Maintenance Practices ADB Airfield Solutions

2 Optimize your Airside Operations Performance ADB s technological excellence and product reliability can only be realised if our partners are truly focused on competency management at every stage of the life cycle of Airfield Ground Lighting (AGL): from the preliminary design stage to the effective operation of an airport. For airports worldwide, regular training of maintenance and service personnel is imperative in improving their airside operations performance: not only is AGL technology continuously evolving, requiring periodic updates of knowhow, but there is also a clear need to bring maintenance performance to pre-defined levels, in accordance with international standards and regulations such as ICAO, IEC and FAA. Our courses and competence development programs equip organizations like yours and AGL users at every level of their career, with the appropriate tools to stay relevant in airfield ground lighting. Twelve Modular Packages ADB offers dedicated Training Seminars to meet these demands and to support airports in reaching their goals. Through its unequalled experience in the AGL industry, ADB is able to provide the right combination of theoretical context, mixed with a very pragmatic approach on the practical aspects of AGL maintenance. ADB offers twelve modular courses which are organized periodically every year allowing participation either per single module or in consecutive modules. In addition, ADB offers customized courses specifically tailored to individual requirements. These customized courses are designated AGLPlus4. Industry-standard Training All training delivered by ADB is conducted in accordance with the guidelines defined in: ICAO Standards and documents: Training Course Number 101 (Airport Engineering Planning, Design and Construction) AGA ENG Training Course Number 104 (Airport Maintenance Electrical including Airport Lighting and Power Generation) AGA MTC ELC. ICAO Design Manuals Parts 1, 4, 5, 6 & 9 ICAO Annex 14 FAA circulars (current edition) AC AC /26/28/46/53 International Electro-technical Commission (IEC) documents: IEC 61821: Electrical installations for lighting and beaconing of aerodromes Maintenance of aeronautical ground lighting constant current series circuits. IEC 61822: Electrical installations for lighting and beaconing of aerodromes Constant Current Regulators IEC 61823: Electrical installations for lighting and beaconing of aerodromes AGL series transformers IEC TS 61827: Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports IEC TS 62143: Aeronautical Ground Lighting Guidelines for the development of a safety lifecycle methodology. Courses for all career levels Whether you re a newcomer, or an experienced professional, you can benefit from ADB s training packages. Our training packages and programs are designed to be relevant at every level of your career: Join our industry: Entry-level training in AGL Develop: Specialized training for AGL professionals Manage: Management-level training Great Learning Experience ADB trainers have many years of rich field experience, supporting our customers with services such as design and engineering, installation supervision, testing, commissioning and on-site maintenance. The trainer creates an interactive atmosphere where participants can exchange best practices, working on understanding different environments, as well as their own experiences. As you like it Our training programs can be delivered where, when and how you prefer, to suit your specific needs and requirements. Where: on site, or at our training centers at Zaventem, Belgium; Dubai, United Arab Emirates, Tianjin, China and Kuala Lumpur, Malaysia which are equipped to provide an ideal learning environment. When: In addition to the standard sessions listed in our annual training calendar, you can contact your Customer Service Representative or our Training Manager for a customized proposal. How: While standard sessions are in English, we can also deliver most of our training packages in French and Spanish on request.

3 AGLPlus 1: Airfield Ground Lighting Principles All persons involved in the design, installation, commissioning, maintenance and/or operation of AGL products and systems Provide an introduction to the requirements of airfield lighting Give a general overview of AGL products/systems applications (i.e. characteristics, features and functionality) Introduce the international standards Explain the principles of maintenance and safety Definition of Visual Landings Aids Applicable Standards Principles of AGL Airfield Operating Categories The 4 C Operational Performance Typical configurations and working principles Products and Applications Introduction to safety requirements Introduction to Service Manuals, Planned & Preventative Maintenance and Fault-Finding Standard session: 4-day course beginning at 10h00 on day 1, finishing at 15h00 the last day For dates, please consult our annual training calendar. In addition to the standard sessions scheduled in our annual training calendar, this training package can be organized separately, on site or at any of our training centers in French or in Spanish. Other languages are under preparation. AGLPlus 2: Product Training All persons involved in the design, installation, commissioning, maintenance and/or operation of AGL products and systems Demonstrate practical aspects of the theory covered by our AGLPlus1 Explore in detail the functionality, structure, installation and maintenance of products and systems Provide an extensive understanding of product safety Establish practical maintenance processes related to product/systems (in terms of spare parts, tools, frequency, etc) Airfield Series Circuit Approach Lighting Systems Runway Lighting Systems Inset Lights and Applications Elevated Lights and Applications PAPI Constant Current Regulators Taxiway Lighting Systems Surface Movement Guidance Remote Control & Monitoring Systems Circuit Selectors Isolating Transformers & Airfield Cabling Standard session: 5-day course beginning at 10h00 the first day, finishing at 15h00 the last day For dates, please consult our annual training calendar Knowledge of AGL principles and philosophy (AGLPlus 1 course content or equivalent) is mandatory In addition to the standard sessions scheduled in our annual training calendar, this training package can be organized separately, on site or at any of our training centers in French or in Spanish. Other languages are under preparation. It can also be tailor-made and limited to certain products or systems, depending on your installed base.

4 AGLPlus 3: AGL Maintenance Management All persons involved in airport and AGL management, AGL engineering supervisors and maintenance management Provide an in-depth overview of various AGL operation and maintenance aspects, procedures, tools, equipment and practices Explain the differences between corrective and preventive maintenance systems and their impact on airport operations Establish a typical state-of-the-art maintenance structure depending on the installed base (including the function description) Define the roles and responsibilities of each member of the AGL maintenance team (including the competency management) Build awareness of Health & Safety cases, to establish a professional H & S plan Focus on airside safety Definition of Maintenance (preventive and corrective) Maintenance structure Functions description Operational and Maintenance Planning Corrective and Preventive (conditional/ scheduled) maintenance procedures Documentation management Competency management Tools and Equipment Spare parts management Airside Safety, AGL and High Voltage Safety Procedures and Regulations Standard session: 4-day course beginning at 10h00 the first day, finishing at 15h00 the last day For dates, please consult our annual training calendar. Knowledge of AGL principles and philosophy as well as AGL products (AGLPlus 1 & AGLPlus 2 courses or equivalent) is mandatory This training package can be organized separately, on site or at any of our training centers, in French or Spanish on request. Other languages are under preparation. AGLPlus 4: AGL Specialist Specific training tailored to individual requirements All persons involved in the installation, commissioning, maintenance and/or operation of AGL products and systems Provide specialized maintenance and operator training on ADB products and systems that is tailor-made to meet your needs and specifications, and is delivered in accordance with international standards as established by ICAO and other national bodies. The list below provides an example of the types of training we can deliver. ABD has defined standard AGLPlus 4 modules that cover practical training on our product portfolio including description of design characteristics, installation/ commissioning procedures, fault finding & maintenance EL-1: Elevated Lights (1-day session) POW-1: MCR3 (2-day session) IN-1: Inset Lights (1-day session) POW-2: CRE/VIS (2-day session) FLA-1: Flashing System (2-day session) PAP-1: PAPI system (1-day session) JO-1: Cables and Jointing (1-day session) AGL High Voltage Safe Working Procedures PLC Training Competency management training ALCS & SCADA System And any other topics related to the AGL industry that you might need Except for the standard modules listed in the annual training calendar, duration and location of AGLPlus 4 training can be tailormade to suit your requirements Knowledge of AGL principles and philosophy (AGLPlus 1 course or equivalent) is mandatory Excepted for the standard modules listed in our annual training calendar, the AGLPlus 4 training package is always organized separately, on site or at any of our training centers, in different languages on request

5 AGLPlus 5: AGL Design All persons involved in the engineering and design of AGL equipment Provide an introduction to AGL design, products and system characteristics and specifications to meet international standards as established by ICAO and other national bodies such as FAA / EUROCONTROL / EASA / NATO / UK CAA / STAC Applicable Standards Airfield Operating Categories (in terms of AGL requirements) Typical configurations and working principles Functions and applications Electrical engineering Applications engineering and design (e.g. Approach configuration, profile, etc) Typical specifications Mounting systems Systems design 2 weeks but may be split into two sub modules and can be attended separately: AGLPlus 5A general overview and introduction to AGL design AGLPlus 5B detailed engineering competence including practical design exercises For the standard sessions, please consult our yearly training schedule. Knowledge of AGL principles and philosophy as well as AGL products (AGLPlus 1 & AGLPlus 2 courses or equivalent) is mandatory This training package can be organized separately, on site or at any of our training centers on request. AGLPlus 6: AGL Installation and Installation Quality & Awareness All persons involved in the installation and the commissioning of AGL equipment; including all the supervisors/ inspectors of AGL projects. Provide an introduction to AGL installation techniques and methods Practical exposure to installation in accordance with international standards as recognized by ICAO and other national bodies e.g. FAA / EUROCONTROL / EASA / NATO / UK CAA /STAC/ Practical awareness and knowledge of quality issues and experience regarding installation of the AGL primary and secondary circuit equipment and lighting fixtures Applicable Standards Mounting systems Grounding/earthing for a good electrical connection Practical exercises of shallow base installation Testing of installation work Standard session: 5-day course beginning at 10h00 the first day, finishing at 15h00 the last day For dates, please consult our annual training calendar. Knowledge of AGL principles and philosophy as well as AGL products (AGLPlus 1 and AGLPlus 2 courses or equivalent) is mandatory This training package can be organized separately on site upon request (only if all the tools and material are available).

6 Skill enhancement: ADB Competence Management Program With the needs for competence within your maintenance organization constantly evolving due to people turnover, technology changes, and modification of standards, making sure your people have the right skills at the right moment can pose a huge challenge. ADB s Competence Management Programs (CMP) is designed to support airports maintenance organizations optimize their skills. The Competence Management Program is implemented in different phases: Definition of skills objective: together with your maintenance team management, we define the objective in terms of level required for each equipment (basic, advanced, expert) as well as the number of people required per level Assessment of current situation: through specifically designed questionnaires and tests, we evaluate the vcurrent competence of your people. At the end of this first process, we gain a clear view (as shown on the picture) of the existing gaps between your objectives and the current skills of your maintenance team. Training program definition: based on the previous analysis, we design a dedicated training program, covering all topics to be addressed in order to close the gap Training delivery: once the program is set, we work with you to organize the schedule of the training courses. At the end of each session, tests and evaluations are made to make sure that the identified gaps are addressed Follow-up: as competences need to be monitored and maintained, ADB can regularly review the skills of your personnel. When deviations are identified, we propose remedial actions, such as refresher courses. This also allows you to address people turnover issues. Basic - Lights 4 3 Expert - CCR 2 Basic - CCR 1 0 Expert - Lights Advanced - Lights Advanced - CCR Objective / Target Assessment Current situation

7 Information What are the locations (for Standard sessions)? ADB Headquarters in Zaventem, Belgium ADB offices in Dubai, United Arab Emirates ADB offices in Tianjing, PR China ADB offices in Kuala Lumpur, Malaysia How to Register? Reserve your seat in the next seminar now as there are only a limited number of places available. You can register by completing the form on the back and sending it by fax to this number: or by to customerservice@adb-air.com. Conditions The training package includes training syllabus, refreshments and lunches (unless stipulated otherwise in the contract) Accommodation and other expenses are not included (unless stipulated otherwise in the contract) No refund of payment for cancellations received later than 2 weeks before the start of the respective module. The participant can instead attend the course at a later date, or transfer this to another delegate ADB reserves the right to alter content, to change prices, dates, times and venues or cancel any course For standard sessions, a minimum of 5 participants per session will be required. In case any session registers less than 5 participants, ADB reserves the right to reschedule the session, with a notice of 2 weeks.

8 ADB Services As the world leader in the AGL industry, ADB offers you a wide range of services to maximize the reliability and availability of your AGL systems Design: execution of your AGL project design, consultancy services, site surveys Installation and Commissioning: supervision of your AGL installation during project and commissioning by ADB specialists Technical support: telephone support, remote access, on-site technical assistance, hot-line and stand-by contracts Spare parts: rapid deployment of ADB genuine spare parts thanks to dedicated stock. Consultancy services to determine the right stock level on site according your installed base Maintenance: Maintenance by the manufacturer program either punctual or through contracts: a guarantee to maximize availability and increase equipment lifetime AGL Full Service: full maintenance contracts where ADB takes complete responsibility of your AGL infrastructure, including substation and related equipment Upgrades and Retrofits: specially designed solutions to increase equipment lifetime, enhance performance and reduce energy consumption For more information, contact us by sending a fax to the number: or by to customerservice@adb-air.com The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. ADB Airfield Solutions Leuvensesteenweg 585 B-1930 Zaventem Belgium Phone: +32 (0) Fax: +32 (0) info.adb@adb-air.com ADB all rights reserved order number DOCA01011EV3 subject to modifications