TOOL TRADES / CONSTRUCTION Page 1 of 7

Transcription

1 TOOL TRADES / CONSTRUCTION Page 1 of 7 Electrical Apprentices Power Pros Electrical, Vancouver Looking for new employees to start work as soon as possible in the Greater Vancouver Area and Lower Fraser Valley Excellent competitive wages RRSP program Flexible hours Exceptional customer base. your resume to: info@powerpros.ca; Electrical Journeyman Service Technician Power Pros Electrical, Vancouver, $30 - $35/hr Looking for Service Van Technicians to start work as soon as possible in the Greater Vancouver Area and Lower Fraser Valley. Qualifications: Journeyman Electrical Red Seal 2 years minimum as a Service Technician Driver License class 5 Great customer service skills. your resume to: info@powerpros.ca; Electrical Project Manager Berts Electric, Aldergrove The Project Manager preforms a wide range of duties and is responsible for project planning, implementing, billing, controlling and evaluating each project. Qualifications: An Electrical trade certificate or Electrical Engineering Degree 5+ years' experience in ELECTRICAL Project Management (estimating experience is an asset but not required) Strong attention to detail Good organizational skills Good computer skills including MS Office / CAD / Bluebeam Strong knowledge of Canadian Electrical code. Apply by December 31, Recruiting@bertselectric.net Electrical Site Superintendent Power Pros Electrical, Vancouver Looking for Site Superintendents to start work as soon as possible in the Greater Vancouver Area and Lower Fraser Valley. Qualifications: Journeyman Electrical Red Seal Has experience running projects, managing a team and working with suppliers, and customers Great verbal and written skills, knowledgeable with computers. your resume: info@powerpros.ca; Electrician (2) Shine Star Electricals, Surrey, $25.50/hr Looking for 2 Fulltime Electricians. Requirements: Secondary school education is required Completion of a four- to five-year apprenticeship program is usually required Or Secondary school with more than 1 years of experience in this field. Apply by Shinestarelectricals@outlook.com; Bear Creek Post Office, Surrey, BC V3W 2P5 Electrician Instructor, P/T Vancouver Career College (Burnaby) Inc., Surrey The Electrical Instructor is responsible for leveraging their expertise and experience to deliver education services to students through: Preparing lesson plans and teaching aids that utilize a variety of teaching methods to promote student success Challenging, engaging, and communicating with students to encourage their participation and learning Coaching, mentoring and tutoring students to maximize student learning and

2 TOOL TRADES / CONSTRUCTION Page 2 of 7 retention Assigning and posting grades. The ideal candidate must possess the following education, experience and competencies: BC Certificate of Qualification with a Red Seal Endorsement or a Certificate of Qualification from another Canadian jurisdiction complete with Red Seal Endorsement A minimum of 5 years experience working in the industry as a journeyperson Strong communication and interpersonal skills, including presentation and group facilitation skills Ability to motivate, engage and inspire students, and committed to student success. To apply, visit: Or careers@campus-support.ca; Ave., Surrey, BC V3T 5T3; Heavy Duty Mechanic Q-Tech, Delta Full Time Ticketed Heavy Duty Mechanic for equipment maintenance in Sawmills and Production plants. Please submit resume with contact information and work experience. No training will be provided so please only apply if you are FULLY TICKETED: Work with repairing and maintaining forklifts, loaders, boom boats Hydraulic diagnostic and repair Maintaining shop and inventory parts for site equipment Project Maintenance Propane certified Red Seal HD mechanic Experience working with hydraulics and LOADERS 5 years minimum experience as a Red Seal Heavy Duty Mechanic Ability to troubleshoot mechanical problems and read schematics Minimum class 5 driver's license. Apply by January 08, carla@q-techservices.com Operator / Mechanic Bradley Smokers, Delta, $12/hr Excellent communication skills and proven ability to plan priorities and keep organized. Mechanical Background, Basic Electrical knowledge and understanding preventive maintenance. Organized and able to handle multiple projects and able to work in a safe manner. If you are a jack of all trades, but master of none, then your skills set will come in handy each and every day. Ability to use all power tools, grinders, drills and pneumatic tools etc. Qualifications: Grade 12 Completion Good communication skills (Read and Write English) Ability to perform each essential duty satisfactorily Some mechanical and electrical aptitude is required Good multitasking skills and have a good team spirit. Apply by December 17, 2015 Phone: Fax: olev@bradleysmoker.com; 8380 River Road, Delta, BC V4G 1B5; Pump & Water Treatment Technician EDS Pumps & Water Treatment Ltd., Langley, $40,000 - $60,000 The successful candidate will have a minimum of 3 years electrical, plumbing, water treatment or pump experience. Additionally they will have good mechanical reasoning skills, be reliable, with a neat appearance, a self-starter and customer service oriented. Those with a strong electrical background are preferred. Additional requirements include: Goal oriented, self- starting and energetic Willingness to participate in the continuing education programs provided by the company Clean, valid drivers license Good communication skills Excellent command of the English language Ability to follow directions* Excellent customer service skills. Preferred Skills: Electronics troubleshooting Equipment maintenance skills Good record keeping abilities Supply management knowledge. Send resume by fax: (604) or water@edspumps.com (Att: Hiring Manager);23184 Fraser Hwy, Langley, BC V2Z 2V1; Drop ins will NOT be interviewed Service Technician (HD/CT Mechanic) VIMAR Equipment, Burnaby The Service Technician performs basic diagnostics, service repairs and maintenance work on customer and/or

3 TOOL TRADES / CONSTRUCTION Page 3 of 7 dealer-owned municipal equipment. This position will be given direction or guidance from the Service Manager. Requirements: Licensed Red Seal CT or HD mechanic Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures Proficient knowledge of mechanical, electrical and hydraulic systems used in the repair of heavy equipment Ability to operate vehicles and equipment used for diagnostic purposes Proficient oral and written communication skills Ability to lift at least 75 lbs. repeatedly High School Diploma or equivalent experience required; Valid drivers' license is required - Class 3 preferred Fork lift license preferred. Send resume to: sales@vimarequipment.com; Closing Date: December 11, 2015 Welder All-Pro Services Ltd., Port Coquitlam, $33/hr Interpret welding process specifications, Operate manual or semi-automatic, fully automated welding equipment, Operate manual or semi-automatic flame-cutting equipment, Operate brakes, shears and other metal shaping, straightening and bending machines, Fit, braze and torch-straighten metal, Operate oxygen arc cutting equipment (arc-air), (AOC), Determine weldability of materials, Operate hoisting and lifting equipment, Operate previously set-up welding machines to fabricate or repair metal parts and products, Operate previously set-up brazing or soldering machines to bond metal or to fill holes, indentations and seams of metal, Start up, shut down, adjust and monitor robotic welding production line, Maintain and perform minor repairs on welding, brazing and soldering equipment. Fax: ; 2552 Davies Avenue, Port Coquitlam, BC V3C 2J9 Welder Pannu Bros Trucking Ltd., Abbotsford, $26.50/hr Welders will operate welding equipment to weld ferrous and non-ferrous metals and specifically: read and interpret blueprints or welding process specifications; operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux-cored arc welding (FCAW), plasma arc welding (PAW), shielded metal arc welding (SMAW), oxyacetylene welding (OAW), resistance welding and submerged arc welding (SAW); operate manual or semiautomatic flame-cutting equipment; operate brazing and soldering equipment; operate metal shaping machines such as brakes, shears and other metal straightening and bending machines; and, repair worn parts of metal products by welding on extra layers. Work experience and/or training: Completion of a minimum (a) three-year welding apprenticeship, or (b) three years of welding experience and high school, college or industry courses in welding. Apply by pannubros.careers@gmail.com; Fraser Highway Abbotsford, BC V4H 1G2 Canada V4X-1H8; Phone: Fax: Welders (2) A 1 Powder Coating Ltd., Surrey, $25 - $30/hr Required 2 permanent and full time Welders. Requirements: Completion of Secondary school is required Completion of three year apprenticeship program or A combination of over three years of work experience in the trade and some college or industry courses in welding is required. Apply by a1powdercoatingltd@gmail.com; # Avenue, Surrey, BC V3W 1B3; Fax: Carpenter Blackline Construction Ltd., New West, $25.50/hr Requirements: Completion of high school Several of experience in the trade Written and Oral English Maintaining, repairing and renovating residential and commercial buildings; Reading and interpreting blueprints, and other drawings to determine specifications and calculate requirements; Preparing layouts in line with codes

4 TOOL TRADES / CONSTRUCTION Page 4 of 7 of buildings; Measuring, cutting, assembling and joining materials made of wood; Building foundations; Fitting and installing trim items, such as doors, stairs, moulding and hardware. jobs.blacklineconstruction@yahoo.ca; 324 Hoult Street New Westminster, BC V3L 4X1; Fax: No phone calls or walk ins Carpenter BOAS Construction Ltd., Burnaby, $25/hr Requirements: Minimum 4 years of experience OR Completion of a three- to four-year apprenticeship program Completion of high school. Send your resume. boasinterior2014@gmail.com; 4309 Canada way, Burnaby, BC V5G 1J3 Carpenter/Finisher and Siding Installer Treo Interior Contractors Inc., Delta Busy construction/ renovation company is looking to add to our team. We are looking for an experienced, professional carpenter/ finisher and siding installer that's well versed in all aspects of siding and rainscreen install. We work with a multitude of products and our projects have quite a bit of variety [from new construction to renovations]. Applicable skills: Rainscreen application including papering, peel and stick, strapping, flashing,caulking [both for aesthetics and water proofing i.e. rod and caulk] window and door install Siding application including hardi-plank, hardi-panel, hardi-shingles,cedar shingles, cedar tongue and groove siding, cedar lap siding, Fry Reglett and Easytrim metal reveal systems,metal corrugated siding soffit install of tongue and groove products. A resume with references is a must and applicants that apply without one will not be contacted. darko@dulex.ca Door Assembler/Sales Person A & A Doors and Mouldings, Surrey Sales person should have a driving licence and fair knowledge of lower main land area. We offer very competitive wages and commission to sales person. Fax resume: ; Or drop off at: ave Surrey Drywall Finishers/Tapers City Projects Ltd., (Brentwood Area) Burnaby Looking for Experienced Drywall Finishers/Tapers for Commercial Tenant Improvement Work. All work in Greater Vancouver. Send resume with summary of achievements and wage expectations to: @cityprojects.ca; (No phone calls please.). Drywall Installer (2) L&N Urban Builder Ltd., North Vancouver, $25/hr Two open permanent full-time positions of a drywall installer/taper. There is no education requirement for this position, but candidates must have at least two years of experience as a taper. Job duties will include measuring and cutting wallboard (drywall/sheetrock/cement board/"flexible drywall") sheets to size; trimming rough wallboard edges to maintain even joints; installation and securing of wallboard sheets, installation of corner beads; filling seams, dents and holes with drywall mud; even and smooth out cured joints etc. hraturbanbuilder@gmail.com; 1290 Keith Road East, North Vancouver, BC V7J 3S3

5 TOOL TRADES / CONSTRUCTION Page 5 of 7 Painters and Decorators (3) Canamark Property Services Ltd., Port Moody, $20 - $25/hr Hiring experienced painters for commercial and residential for full time employment. Three positions are available. Qualifications: Completion of secondary school Minimum of 4 years experience as a Painter (commercial) OR completion of a three to four year apprenticeship program Intermediate English skills Ability to work and communicate with others Ability to instruct apprentices and new workers Ability to work at heights Ability to learn and obey our extensive company safety policy Ability to lift heavy objects. Send your resume via at: job.canamark@hotmail.com; write Painter Job on subject; 3190 St. John's Street 206, Port Moody, British Columbia V3H 2C7 Plumber Journeyman Markim Projects Ltd., Vancouver Journeyman and apprentice plumbers required immediately for various projects all in the lower mainland. Must be able to lay out own work and have there own transportation, hand tools and safety equipment. Wages paid based on experience. markimprojects@shaw.ca Plumbers Journeyman & Apprentice Tap Roots Plumbing & Heating Ltd., Richmond Looking to hire 1st yr to Journeyman plumbers with good work ethic. Must be able to work in new construction, both highrise and woodframe. Must have a valid drivers license and own transportation. This is for a long-term position with room to advance - all depending on yourself! Reply with any experience you have, resume, and when you would be able to start. Contact: Rob. Fax: rob@taproots.ca Project Manager/Estimator, F/T Campbell Construction, Victoria Duty: Provide overall construction management from pre-construction to completion including design, coordination, budget, and schedule in conjunction with the Superintendent Meet with Owners and Architects in a professional manner and have the ability to communicate effectively both the concerns and best interests of the company Lead project meetings with internal and external parties to monitor and support the team's ongoing development and progression Submit project reports to the Finance department and communicate with management about project progress and areas of risk that need to be escalated. Qualifications: BCIT Diploma of Building Technology or equivalent qualifications Estimating experience (Viewpoint, Sage-Timberline, and Excel software) Experience in managing building construction projects. resume to: morley@campbellconstruction.ca; to the attention of the "Corporate Controller". Project Scheduler JJM Construction, Delta The Project Scheduler is responsible for providing on-site and office construction planning, resource optimization and scheduling leadership for multiple activities in different disciplines while maintaining schedules for several projects simultaneously. Qualifications: Post-Secondary Construction Engineering or Management degree or Technical Diploma. Similar construction scheduling experience or equivalent combinations of training and related experience is preferred Minimum one to three (1 -- 3) years' experience in project scheduling/ planning is required Extensive knowledge of and ability to select/ apply resource monitoring and control techniques such as

6 TOOL TRADES / CONSTRUCTION Page 6 of 7 CPM networks scheduling, computer scheduling techniques, as well as an understanding of the nature of process systems, structures and construction technology required Highly proficient in using CPM Scheduling Software and techniques, particularly Primavera P6, Heavy Bid, Microsoft Office, Microsoft Project and proprietary software. AutoCAD and 3D Modeling experience would be an asset Must be legally eligible to work in Canada (Canadian Citizen or valid Permanent Resident) Must possess a valid driver's licence and have a clean driving record. careers@jjmconstruction.com; Competition No: No phone calls please. Roofers Real Longlife Enviro Roofing Corp., Delta, $23/hr Requirements: Minimum secondary school education with a 2 to 3 year apprenticeship training or Over 3 years of work experience as roofer. Apply with resume by enviroroofings@outlook.com or by mail to Street, Delta, BC V4C 6R1; TOMCAT Demolition Lead Hand/Labourer Lower Mainland Looking for interior demolition labours and a lead hand. Full-time work. Must have own tools and a valid BC drivers license. Must be able to work some nights and weekends. Wage based on experience. Call Evan at: Upholsterer WD Western Designers Furnishings Ltd., Vancouver Potential Skilled upholsterers should be able to have knowledge of different types of upholstery fabrics,their suitability for each potential project. To install padding/underlays and fasten covering materials to furniture frames as per designs. Tack, glue or sew ornamental trim,braids or buttons on upholstered items Minimum 2 years experience required. Apply by Phone: Fax: wd_upholstery@telus.net; Auto Body Technician Sudden Impact Auto Body Repair Ltd., Surrey, $26/hr Requirements: Completion of secondary school is required with a combination of over three years of work experience in the motor vehicle body repair trade with high school or college automotive body repair program is required. OR Completion of a three- to four-year motor vehicle body repair apprenticeship program Valid Drivers license. Suddenimpact80@outlook.com; # a ave, Surrey, BC V3W 0L6 Autobody Repair Technician New Profession SVA Collission, Richmond, $25/hr Position Requirements: Completion of Secondary school is preferred Must have at least 3 years of experience as an Autobody Repair, or Completion of 3 years of apprenticeship and/or college program combination in an Autobody Repairer. Send your resumes to: daniel@newprofession.ca; Fax:

7 TOOL TRADES / CONSTRUCTION Page 7 of 7 Bodyman Truck West Collision, Langley Busy commercial collision and paint shop looking for full-time junior bodymen. Willing to train. Opportunity to learn from ticketed Bodyman. Heavy truck experience an asset. Looking for workers to fill weekday and/or weekend shifts. Must work well as a team member. Fax resume and list all relevant experience. Fax: Import Technician Midway Mazda, South Surrey Will consider 4th year apprentice. Applicants to be team oriented, reliable, and well organized. Mazda/ Import experience preferred but not necessary. Fax: Office Cargo Agents Menzies Aviation, Richmond, $13.25/hr Duties: Process cargo manifests and airway bills and/or freight on and off commercial aircraft Operate and use assigned airline computers and systems for data entries Read and interpret aircraft weight and balance loading instructions, hazardous material identification labels, aircraft loading manifests, and cargo routing familiarization. Requirement: Must have high school diploma or equivalent work experience Must be able to speak, read, and write in English Valid driver's license with good driving record / Minimum "N"(7) or class (5). Apply by December 22, Phone: Fax: anthony.ko@menziesaviation.com; 3611 Jericho Road, Richmond, BC V7B 1M3 Truck and Transport Mechanics Pannu Bros Trucking Ltd., Abbotsford, $ $41.25/hr Work experience and/or training: Completion of a minimum (a) four-year truck and transport mechanic or trucktrailer repair apprenticeship, or (b) four years of truck and transport mechanic experience and high school, college or industry courses in truck or heavy duty equipment mechanics. Apply by pannubros.careers@gmail.com; Fraser Highway Abbotsford, BC V4H 1G2 Canada V4X-1H8; Phone: Fax: