CP500 CONTROL PANELS. Web pages and Applets Step 2

Transcription

1 CP500 CONTROL PANELS Web pages and Applets Step 2 Type des. Prep Fr. BERTRAND 06/2005 Doc. Kind Function Description No. Of P Appr. / Resp. dept. Title Web pages and Applets Step2 6 Doc no. Lang. Rev. Ind. Entrelec 1SBC159100M0202_Ch2 En 1

2 Summary 1. Function and area of use About the Start Up document Technical description Configuring an FTP server Configuring a Web server Downloading the terminal applet and the HTML file Reflecting the operator terminal in the web browser...6 Entrelec 1SBC159100M0202_Ch2 En 2

3 Installation of the card and configuration of the IP connection is already described on STEP1: TCP/IP Configuration. 1. Function and area of use The operator terminal can be used as a web server. Using a terminal applet, the operator terminal can be reflected in the web browser Microsoft Internet Explorer. Version 1.00 of the terminal applet can also be reflected in Netscape Navigator. The terminal reflection has the same function as the real operator terminal and is used in the same way. The operator terminal has to have an expansion slot (available on CP551 without slot) to support the function. 2. About the Start Up document This Start Up document should not be considered as a complete manual. It is an aid to be able to start up a normal application quickly and easily. For further information we refer to the manual of the operator terminal. 3. Technical description The terminal applet creates a reflection of the operator terminal. The operator terminal with its project is then shown in the web browser. Object status can then be altered, recipes written and so on by using the computer s mouse and keyboard. All the functions supported in the operator terminal are also supported in the terminal applet. Two files are required for the operator terminal reflection to work: ***appl.cab ***.htm The files are specific for each type of operator terminal and can be obtained from your closest distributor of operator terminals and are include in the CP500 Soft. Note: The ***appl.cab file shall not be decompressed manually; this is done in the browser. For the terminal applet to work the latest version of Microsoft Virtual Machine (ver. 5.0 or later) must be used. The file can be downloaded from Entrelec 1SBC159100M0202_Ch2 En 3

4 4. Configuring an FTP server In your project on CP500Soft, in the Setup menu select / Network / Services. Mark! FTP Server and click Exit. The configuration of the FTP server is now complete. 5. Configuring a Web server Select Network / Services in the Setup menu. Mark! Web Server and click Exit. The configuration of the web server is now complete. Then download the project to the operator terminal. Entrelec 1SBC159100M0202_Ch2 En 4

5 6. Downloading the terminal applet and the HTML file This section describes how to download the terminal applet and the HTML file to the operator terminal. In the following example the program FTP Client is used. The program is included in the additional software tools. Start the FTP Client program in the CP tools program group of the additional software tools. Select Comm Settings in the Options menu. Click New in the Communication setting window. Enter a name for the connection. Enter the IP address of the operator terminal you want to speak with. (See Chap 2: Configuration of address TCP/IP in Step1) Click OK, and then click OK once more. Click Connect. The operator terminal now functions as an FTP server. The HTML library is marked in the Terminal Files field. Look for the two files that were downloaded earlier (***.htm and ***appl.cab) in the PC Files field. The files are downloaded to the terminal by marking them and clicking < Send. Entrelec 1SBC159100M0202_Ch2 En 5

6 7. Reflecting the operator terminal in the web browser Start the web browser Internet Explorer. The IP address stated in section 6 is entered in the address field followed by the HTML file of the operator terminal, in this case: /***.htm. Click on the icon for the operator terminal in the middle of the screen. Click OK to display a window reflecting the operator terminal. The operator terminal now functions as a web server. The terminal applet creates a reflection of the operator terminal. The status of objects can be changed, recipes entered and so on using the computer's mouse and keyboard. All functions that are supported in the operator terminal are also supported in the terminal applet. Entrelec 1SBC159100M0202_Ch2 En 6