International CAD Conference and Exhibition Final Program CAD 13 Volume 10

Transcription

1 International CAD Conference and Exhibition Final Program CAD 13 Volume 10 CAD 13 JUNE 17 20, 2013 UNIVERSITY OF BERGAMO BERGAMO, ITALY

2 International CAD Conference and Exhibition Final Program ISSN CAD 13 Volume 10 Copyright Digital Workflows Inc. Ontario Corp Ormerod Close Dundas, ON L9H 7N7 Canada Tel (905) International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 2 of 226

3 Keynote Speakers Umberto Cugini Politecnico di Milano ITALY Topic: From CAD to Virtual Prototyping: The Evolution of the Approach to Product Development Abstract: Computer Aided Design tools for Mechanical Engineering have been available for over 50 years now. Their history started with simple 2D drafting tools. Today, we are in the era of Virtual Prototyping and Functional Mock Up. There has been an evolution from geometry, which represents statically the shape of machines and components, to functional models, which describe and drive the simulation of the system physical behaviour in real time within interactive environments. In the Product Development Process the evolutions of enabling tools went in the opposite direction: from modeling the documents that synthesize the results of the design process back to the initial problem setting, at an increasingly abstract level. The presentation will go through this evolution pointing out the lessons learned, and provide hints to forecast next steps. Giovanni Ceccarelli Ceccarelli Yacht Design and Engineering ITALY Topic: Yacht Design and Engineering Abstract: Ceccarelli Yacht Design and Engineering is one of the most famous Italian yacht design firms. The company was founded by Epaminonda Ceccarelli, and has now been passed to his son Giovanni. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 3 of 226

4 Jan Larsson Siemens Industry Software Limited UNITED KINGDOM Topic: Embedding of Design and Engineering Intent within CAx Models and Assemblies Abstract: Jan Larsson is the Senior Marketing Director EMEA for Siemens PLM Software s Product Engineering solutions. His presentation will cover the need for a clear strategy when it comes to product and process re use and the value of embedding knowledge into the product engineering process to help innovation while maintaining standards, shorten lead time, and ensure manufacturability. Masaharu Tosu icad Ltd. JAPAN Topic: Ultra Fast 3D CAD System for Machine Design Abstract: Mr. Masaharu Tosu is the General Manager, Research & Development Division, icad Ltd. His speaking topic is "Ultra Fast 3D CAD System for Machine Design. Production facilities and machine tools consist of numerous parts, of the order of several thousands. The geometries of such partes are generally represented by analytic curved surfaces. On the basis of these features, icad has developed a 3D CAD system using Constructive Solid Geometry (CSG) that can display one million parts in 0.2 seconds. he will discuss the superiority of CSG over Boundary Representation (B Rep), and describe the technology underlying icad. Using a notebook PC, a demonstration of how icad performs at high speeds with massive datasets will be given. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 4 of 226

5 Charlie C.L. Wang Chinese University of Hong Kong CHINA Topic: Design for Human Centered Freeform Products: What is the Next? Abstract: Dr. Charlie C. L. Wang is currently an Associate Professor at the Department of Mechanical and Automation Engineering, the Chinese University of Hong Kong, where he began his academic career in He gained his B.Eng. (1998) in Mechatronics Engineering from Huazhong University of Science and Technology, M.Phil. (2000) and Ph.D. (2002) in Mechanical Engineering from the Hong Kong University of Science and Technology. He is a member of ASME and IEEE, and Past Chairman of Technical Committee on Computer Aided Product and Process Development (CAPPD) of ASME. He is currently on the editorial board of Computer Aided Design journal, International Journal of Precision Engineering and Manufacturing, and Journal of the Chinese Institute of Industrial Engineers. Dr. Wang has received a few awards including the ASME CIE Young Engineer Award (2009), the CUHK Young Researcher Award (2009), the CUHK Vice Chancellor's Exemplary Teaching Award (2008), the Best Paper Awards of ASME CIE Conferences (in 2008 and 2001), and the Prakash Krishnaswami CAPPD Best Paper Award of ASME CIE Conference in International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 5 of 226

6 Workshop Emotional Engineering Emotional Engineering is a challenging and fascinating research topic attracting many researchers from various disciplines, including Engineering, Design, Neuroscience, Perception and Cognition, etc. The primary purpose of the EE SIG workshop is to gather a community of researchers and practitioners from different disciplines and sectors interested in exchanging and discussing ideas and issues about the emerging role of emotions in the engineering disciplines in order to share a roadmap for further researches and investigations in this new interdisciplinary field. Participant presentations and ideas will be published and shared with the broader community through the EE SIG web page. Invited speakers Shuichi Fukuda, EE SIG Chair(Stanford University and ASME CIE) Monica Bordegoni, EE SIG Co chair (Politecnico di Milano) Marco Maiocchi (Politecnico di Milano) Alberto Gallace (Università Milano Bicocca) Emotional Engineering SIG (EE SIG) sig International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 6 of 226

7 Sponsors / Exhibitors CAD 13 gratefully acknowledges the generous financial support listed below: Università Degli Studi di Bergamo icad LTD. icad LTD. ( 3D CAD System for Designing Machinery IQ Soft, Inc. ( Custom Development and Software Outsourcing company with headquarters in Ioannina, Greece International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 7 of 226

8 Banquet and Awards Dinner, Monday, June 17, 2013 (included with all registrations) 7:30pm Roof Garden Restaurant of Hotel S. Marco Piazza della Repubblica, Bergamo (GB) The Best Paper Awards, and other Acknowledgements, will be presented at the Banquet. The location is near the listed hotels. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 8 of 226

9 Gala Dinner, Wednesday, June 19, 2013 (separate purchase and reservation) The CAD 13 Gala Dinner will be held at Villa Baiana ( in Moticelli Brusati. Villa Baiana, laid out on three floors, is placed in a wonderful location. It has large halls and terraces with a panoramic view, and is surrounded by a park with ancient trees, among them a very valuable cedar of Lebanon, dated 1784, and a knotty tamarisk dated La Montina, a Franciacorta wine producer ( is also located at this site. The La Montina estate consists of approximately 72 hectares of vineyard spread across 7 different communes of the Franciacorta region. The vineyards lie across low hillsides with soils consisting of calcareous clay and silt. The event includes a visit to the wine cellar and wine tasting. PROGRAM h : Leave the Conference Location by bus h : Visit to the wine cellar The event will start with a guided tour to the wine cellar during which it will be described the Franciacorta complex journey from vineyard to bottle, how much hard work goes into the production of each delicate glassful, about the 70 times that each bottle is carefully handled during its 3 year development in the cellar. h : Aperitif with small appetizers and local products h : Dinner with wine tasting h : Leave Villa Baiana by bus International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 9 of 226

10 Bergamo Map For a higher resolution image refer to the conference web site. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 10 of 226

11 CAD 13 Bus Schedule During the conference, a bus named Special Service CAD 13 will travel from the Hotels to the Conference Site in the morning, and from the Conference Site to the Hotels in the afternoon. The schedule times are listed below: 17 JUNE, 2013 h. 8:00 am from HOTELS to CONFERENCE h. 8:00 am departure from Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:05 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:15 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location. h. 8:20 am from HOTELS to CONFERENCE h. 8:20 am departure from Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:25 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:35 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location. h. 6:20 pm from CONFERENCE to HOTELS h. 6:20 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 6:25 pm arrival at Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 6:30 pm arrival at Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 6:40 pm from CONFERENCE to HOTELS h. 6:40 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 6:45 pm arrival at Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 6:50 pm arrival at Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) 18 JUNE, 2013 h. 8:20 am from HOTELS to CONFERENCE h. 8:15 am departure from Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:20 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:30 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 8:40 am from HOTELS to CONFERENCE h. 8:40 am departure from Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:45 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:55 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 6:20 pm from CONFERENCE to HOTELS h. 6:15 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 6:25 pm arrival at Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 6:30 pm arrival at Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 6:40 pm from CONFERENCE to HOTELS h. 6:40 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 6:50 pm arrival in front of Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 6:55 pm arrival in front of Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 11 of 226

12 19 JUNE, 2013 h. 8:30 am from HOTELS to CONFERENCE h. 8:30 am departure from Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:35 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:45 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 5:30 pm from CONFERENCE to HOTELS h. 5:30 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 5:40 pm arrival in front of Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 5:45 pm arrival in front of Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) 20 JUNE, 2013 h. 8:30 am from HOTELS to CONFERENCE h. 8:30 am departure in front of Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 8:35 am departure from Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) h. 8:45 am arrival of the bus in Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location. h. 4:00 pm from CONFERENCE to HOTELS h. 4:00 pm departure from Piazzale Sant'Agostino Bergamo (Upper Town) CAD'13 Location h. 4:10 pm arrival in front of Hotel Cappello d'oro Viale Papa Giovanni XXIII n 12, Bergamo (Lower Town) h. 4:15 pm arrival in front of Hotel Mercure Viale Papa Giovanni XXIII n 100, Bergamo (Lower Town) Alternatively, and at other times, you can take the Bus ATB Line n.1 (see Bergamo Map), Direction Colle Aperto, Stop Mura. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 12 of 226

13 Conference Rooms Map Ground Floor International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 13 of 226

14 Conference Rooms Map First Floor International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 14 of 226

15 Event Photos Main Entrance Plenary Session Lecture Room International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 15 of 226

16 Best Student Paper Award Flavien Boussuge, Ahmad Shahwan, Jean Claude Léon, Stefanie Hahmann, Gilles Foucault and Lionel Fine Introduced by Wim Bronsvoort and presented by Alex Ntermaris (representing sponsor IQ Soft) Best Overall Paper Award Kenjiro Miura (center) with Al Spence (left) and Wim Bronsvoort (right) International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 16 of 226

17 Umberto Cugini Daniele Regazzoni Janet Spence, Allan Spence, Caterina Rizzi, Giorgio Colombo International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 17 of 226

18 International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 18 of 226

19 Organization General Chair Allan Spence, McMaster University, CANADA Conference Co Chairs Caterina Rizzi, University of Bergamo, ITALY Giorgio Colombo, Politecnico di Milano, ITALY Executive Coordinator Janet Spence, 311 Digital Workflows Inc., CANADA Lead Paper Chair Willem F. Bronsvoort, Delft University of Technology, THE NETHERLANDS Publications Coordinator and Computer Aided Design & Applications Editor in Chief Les Piegl, University of South Florida, USA Paper Co Chairs C. Greg Jensen, Brigham Young University, USA Ajay Joneja, University of Science and Technology, HONG KONG Franca Giannini, CBR IMATI Ge, ITALY Wael Abdelhameed, University of Bahrain, BAHRAIN Amba Bhatt, M. N. National Institute of Technology, Allahabad, UP, INDIA Host Committee Daniele Regazzoni, University of Bergamo, ITALY Davide Russo, University of Bergamo, ITALY Giancarlo Facoetti, University of Bergamo, ITALY Francesco Bassi, University of Bergamo, ITALY Monica Bordegoni, Politechnic of Milan, ITALY Massimo Fucci, Soluzionimpresa, ITALY On Site Assistants Andrea Vitali, University of Bergamo, ITALY Giordano De Vecchi, University of Bergamo, ITALY Roberto Morotti, University of Bergamo, ITALY Marco Ramondino, Polytechnic of Milan, ITALY Simone Bartesaghi, Politechnic of Milan, ITALY International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 19 of 226

20 Long Term Planning Ramy Harik, Lebanese American University, LEBANON Puneet Tandon, PDPM Indian Inst. Information Technology, INDIA Philip Azariadis, University of the Aegean, GREECE Industrial Advisory Board Bob Hedrick, CNC Software, CANADA Jordan Cox, Brigham Young University, USA Ron Fritz, Tech Soft 3D, USA Leslie Gordon, Machine Design, USA Derek Murphy, Studica Limited, CANADA David Kasik, The Boeing Company, USA David Levin, LEDAS, Russia Fenqiang Lin, MachineWorks Ltd., UK John Stuart, PTC, USA Tamas Varady, Geomagic, Inc., USA Guy Haas, TeamEDA, USA William Mondy, Adiana Research and Development, USA International Program Committee Charyar Mehdi Souzani, LURPA ENS CACHAN, FRANCE Nadia Magnenat Thalmann, Nanyang Technological University, SINGAPORE J. Cecil, Oklahoma State University, USA Hui Zhang, Tsinghua University, CHINA Jianmin Zheng, Nanyang Technological University, SINGAPORE Michele Germani, Università Politecnica delle Marche Via Brecce Bianche, ITALY Takashi Kanai, University of Tokyo, JAPAN Shimin Hu, Tsinghua University, CHINA Zhongke Wu, Beijing Normal University, CHINA Anath Fisher, Technion, ISRAEL James Yang, Texax Tech University, USA Tae wan Kim, Seoul National University, KOREA Junhai Yong, Tsinghua University, CHINA Norimasa Yoshida, Nihon University, JAPAN Ahmad Nasri, American University of Beirut, LEBANON Juan Carlos Torres, Universidad Granada, SPAIN Peter Hehenberger, Johannes Kepler University, AUSTRIA Eraldo Jannone da Silva, Universidade de Sao Paulo, BRAZIL International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 20 of 226

21 Academic Advisory Board C.K. Au, Nanyang Technological University, SINGAPORE H. Bao, Zhejiang University, CHINA E. Bohez, Asian Institute of Technology, THAILAND C. Bradley, University of Victoria, CANADA P. Brunet, Universitat Politecnica de Catalunya, SPAIN G. Brunnett, Technische Universität Chemnitz, GERMANY Y. Chen, The University of Hong Kong, HONG KONG S.H. Choi, The University of Hong Kong, HONG KONG C. H. Chu, National Tsing Hua University, TAIWAN R.H. Crawford, University of Texas at Austin, USA W.J.E. Derigent, Centre de Recherche en Automatique de Nancy, FRANCE D. Dutta, University of Illinois at Urbana Champaign, USA C. M. Eastman, Georgia Institute of Technology, USA G. Elber, TECHNION, ISRAEL J.Y.H. Fuh, The National University of Singapore, SINGAPORE R. Gadh, University of California, Los Angeles, USA J. Gao, University of Greenwich at Medway, UK J.S. Gero, University of Sydney, AUSTRALIA S.K. Gupta, University of Maryland, USA B. Gurumoorthy, Indian Institute of Science, INDIA R.F. Harik, Lebanese American University, LEBANON C.M. Hoffmann, Purdue University, USA R. Joan Arinyo, Universitat Politcnica de Catalunya, SPAIN A. Joneja, UST Hong Kong, HONG KONG D. S. Kim, Hanyang University, SOUTH KOREA M. S. Kim, Seoul National University, SOUTH KOREA Y.S. Kim, Sungkyunkwan University, SOUTH KOREA T.R. Kurfess, Georgia Institute of Technology, USA A. Kusiak, The University of Iowa, USA K. Lee, Seoul National University, SOUTH KOREA Y. S. Lee, North Carolina State University, USA W. Ma, City University of Hong Kong, HONG KONG T. Maekawa, Yokohama National University, JAPAN S. Mann, University of Waterloo, CANADA R. R. Martin, University of Wales College of Cardiff, UK H. Masuda, The University of Tokyo, JAPAN C. H. Menq, The Ohio State University, USA International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 21 of 226

22 K. T. Miura, Shizuoka University, JAPAN A. H. Nasri, American University in Beirut, LEBANON S. C. Park, Ajou University, SOUTH KOREA N. M. Patrikalakis, MIT, USA Q. Peng, Zhejiang University, CHINA K. Ramani, Purdue University, USA E. Red, Brigham Young University, USA W. C. Regli, Drexel University, USA G. Renner, Hungarian Academy of Sciences, HUNGARY C. A. Roberts, Arizona State University, USA D. Rosen, Georgia Institute of Technology, USA N. S. Sapidis, University of Western Macedonia, GREECE C. H. Sequin, University of California, Berkeley, USA J. Shen, University of Michigan Dearborn, USA K. Shimada, Carnegie Mellon University, USA K. Sugihara, The University of Tokyo, JAPAN J. Sun, Chinese Academy of Engineering, CHINA W. Sun, Drexel University, USA H. Suzuki, University of Tokyo, JAPAN S. T. Tan, University of Hong Kong, HONG KONG K. Tang, UST Hong Kong, HONG KONG G. Turkiyyah, University of Washington, USA C. C. L. Wang, The Chinese University of Hong Kong, HONG KONG Y. Xiong, Chinese Academy of Sciences, CHINA D. Xue, The University of Calgary, CANADA M. Yang, Korea Advanced Institute of Science and Technology, SOUTH KOREA D. H. Yoon, The University of Michigan Dearborn, USA M. M. F. Yuen, UST Hong Kong, HONG KONG C. W. J. Zhang, University of Saskatchewan, CANADA International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 22 of 226

23 Reviewers and Volunteers The conference sincerely appreciates the efforts of the many peer reviewers, on site assistants, and everyone who volunteered their efforts to successfully bring the conference together. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 23 of 226

24 Presentation Schedule Title (Extended Abstract Number): Author1; Author2; Monday Morning, 17 June :00 8:50 Registration (Room 2) 8:50 9:00 Welcome and Opening Remarks (Room 5), Chair: Allan Spence Prof. Stefano Paleari, Rector of University of Bergamo Introduced by Caterina Rizzi 9:00 10:00 Keynote K1: From CAD to Virtual Prototyping: The Evolution of the Approach to Product Development (Room 5) Speaker: Umberto Cugini, Politecnico di Milano, ITALY Chair: Caterina Rizzi 10:00 10:20 Coffee Break (Room 5 annex) Registration (Room 2) 10:20 12:20 Virtual Prototyping I (A) Chair: Monica Bordegoni (Room 5) Bio Engineering I (B) Chair: Ajay Joneja (Room 1) Geometric Modeling (C) Chair: Ramanathan Muthuganapathy (Room 7) 10:20 10:50 Streamlining Function oriented Prosthesis socket design through Development by Consistent Shape Optimization (5): Francesco Integration of Automotive Function Saverio Frillici; Federico Rotini Architectures with CAD Models (60): Moritz Cohrs; Stefan Klimke; Gabriel Zachmann Substituting Simple Structural Beam Frame Substructures with Equivalent Beam Plate Combinations (77): Steven Tebby; Ahmad Barari; Ebrahim Esmailzadeh 10:50 11:20 Using Augmented 3D Objects Instead Of Proxies In 3D UIs (107): Tom Kuehnert; Stephan Rusdorf; Guido Brunnett Analysis and Evaluation of Limb Alignment in Total Knee Replacement (21): Nilesh Ghongade; Dr. Ravi Warkhedkar; Ashok Shyam Domain Mapping for Volumetric Parameterization using Harmonic Functions (64): Vikash Gupta; Hari K Voruganti; Bhaskar Dasgupta 11:20 11:50 Re engineering of the haptic feedback of a dishwasher door (14): Francesco Ferrise; Serena Graziosi; Guilherme Phillips Furtado; Monica Bordegoni; Dino Bongini FE analysis of contact between stump and socket during simulation of amputee motion (55): Giorgio Colombo; Roberto Morotti; Caterina Rizzi Determining curves in the convex hull from a set of planar freeform closed convex curves (24): Vishwanath A.V.; Ramanathan Muthuganapathy 11:50 12:20 Design of a Desktop Haptic System driven by CAD and Multi body Associativity (68): Mario Covarrubias; Monica Bordegoni A Study on Parametric Shape Modifications of 3D Skeletal Models (23): Jenson YC Lee; Ajay Joneja International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 24 of 226

25 Monday Afternoon, 17 June :20 13:30 Lunch Break (Room 5 annex) 13:30 14:30 Keynote K2: Yacht Design and Engineering (Room 5) Speaker: Giovanni Ceccarelli, Ceccarelli Yacht Design and Engineering Chair: Giorgio Colombo 14:30 14:50 Coffee Break (Room 5 annex) Registration (Room 2) 14:50 16:50 Machining (D) Chair: Christophe Tournier (Room 5) Reverse Engineering (E) Chair: Testsuo Oya (Room 1) Architectural Design (F) Chair: Nan Ching Tai (Room 7) 14:50 15:20 A potential field approach for A Rendering Method of Laser Interactive interior design in collision avoidance in 5 axis milling Scanned Point Clouds of Large Scale Augmented Reality environment (54): Virgile Lacharnay; Christophe Environments by Adaptive Graphic (57): Giandomenico Caruso; Guido Tournier; Pierre Yves Péchard; Primitive Selection (97): Hiroaki Re; Marina Carulli; Monica Claire Lartigue Date; Takashi Maeno; Satoshi Kanai Bordegoni 15:20 15:50 Improved Spiral High Speed Machining of Pockets With Islands (51): Martin Held; Christian Spielberger Feature preserving outermostsurface polygonization from CT images (36): Takashi Michikawa; Masaki Moriguchi; Hiromasa Suzuki Chieh Jen Lin Visual Architectural Topology An Ontology Based Topological Tool in an Architectural Case Library (7): 15:50 16:20 In Situ Measurement and Distributed Computing for Adjustable CNC Machining (95): Allan Spence; Alan Sawula; James Stone; Yu Pin Lin Reconstruction method of trimmed Surfaces with maintaining G1 continuity with adjacent surfaces (26): Yuta Muraki; Katsutsugu Matsuyama; Kouichi Konno; Yoshimasa Tokuyama Notes on Generative modeling, Procedural Symmetry and Constructability of Architectural Design (73): Shen Guan Shih 16:20 16:50 Integration Of Machining Constraints In Design Optimization Of A Guide Vane Cascade (59): Julien Monge; Christian Vessaz; François Avellan; Christophe Tournier High Quality shape fitting for aesthetic modeling based on Class A condition (91): Tetsuo Oya; Hiroki Amemiya; Hideki Aoyama; Masatake Higashi Applications of Luminance Contrast in Architectural Design (9): Nan Ching Tai 16:50 18:00 Vendor Time and Networking (Room 3) Please visit with our vendors and sponsors Registration (Room 2) 18:00 19:30 Free Time 19:30 23:00 Dinner and Awards Banquet: Volunteer Recognition and Best Paper Awards International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 25 of 226

26 Tuesday Morning, 18 June :00 9:00 Registration (Room 2) 9:00 10:00 Keynote K3: embedding of design and engineering intent within CAx models and assemblies (Room 5) Speaker: Jan Larsson, Siemens Industry Software Limited, United Kingdom Chair: Caterina Rizzi 10:00 10:20 Coffee Break (Room 5 Annex) Registration (Room 2) 10:20 12:20 Knowledge/Design Intent (G) Chair: Les Piegl (Room 5) Reverse Engineering II (H) Chair: Jie Shen (Room 1) Meshes (I) Chair: Hiroaki Date (Room 7) 10:20 10:50 An application of enhanced Voxel based path planning for 3D knowledge based design in scanning of mechanical parts (33): automotive seat development (49): Claire Lartigue; Yann Quinsat; Severin Stadler; Mario Hirz Charyar Mehdi Souzani; Alexandre Zuquete Guarato; Shadan Tabibian Extraction of surface feature lines on meshes using normal tensor framework (27): Shoichi Tsuchie; Masatake Higashi 10:50 11:20 Mapping Design Rationale to Support Function Behavior Structure Modeling in Product Design (56): Yan Liang; Ying Liu; Davide Russo REFM: A Reverse Engineering For Manufacturing approach (98): Salam Ali; Alexandre Durupt; Pierre Antoine Adragna; Magali Bosch Weaving a four dimensional mesh model from a series of threedimensional voxel models (93): Masahiko Onosato; Yosuke Saito; Fumiki Tanaka; Ryoji Kawagishi 11:20 11:50 An integrated approach supporting design, simulation and production engineering of connection techniques in automotive body inwhite development (61): Katharina Thum; Mario Hirz; Johannes Mayr Iterative Sampling for Flatness Inspection Using High Density Data Points (79): Ahmad Barari; Sergio Mordo Optimal Rotational Symmetry Cell Mesh Construction for FE Analysis by Symmetry constrained Local Delaunay Refinement (48): Weijuan Cao; Ming Li; Shuming Gao 11:50 12:20 A knowledge guided approach to line curve intersection (13): Les Piegl; Khairan Rajab Local Global Image Binarization for Quality Improvement of Deformed Reconstructing the Cellular Structure Mesh Models for FEA by Density of Polymer Foam Materials (6): and Geometry recovering Phased Michael Greenleaf; Jie Shen; David ODT Smoothing (89): Yoon Hiroki Maehama; Hiroaki Date; Satoshi Kanai International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 26 of 226

27 Tuesday Afternoon I, 18 June :20 13:30 Lunch Break (Room 5 annex) 13:30 15:00 Product Life Cycle Management (J) Chair: Qingjin Peng (Room 5) Curves and Surfaces I (K) Chair: Martin Held (Room 1) Multi User Systems (L) Chair: Wim Bronsvoort (Room 7) 13:30 14:00 An integration of ECO DESIGN guidelines based on structural optimization in a CAD framework (84): Davide Russo; Caterina Rizzi Type Constrained Direct Fitting of Quadric Surfaces (25): James Andrews; Carlo Sequin Data consistency and conflict avoidance in a multi user CAx environment (10): Robert Moncur; C. Greg Jensen; Edward Red; Chia Chi Teng 14:00 14:30 Using 3D CAD models for value visualization: an approach with SIEMENS NX HD3D Visual Reporting (42): Marco Bertoni; Alessandro Bertoni; Henk Broeze; Gilles Dubourg; Clive Sandhurst 14:30 15:00 Interface adaptability for an industrial painting machine (28): Chonglin Hu; Qingjin Peng; Peihua Gu It is time to drop the R from Effective Collaboration through NURBS (52): Les Piegl; Khairan Rajab Multi user CAx by Implementing New Methods of Product Specification and Management (81): Vonn Holyoak; Edward Red; Greg Jensen Curvature Continuous Approximation of Planar Curvilinear Profiles (31): Martin Held; Dominik Kaaser Scalable Integration of Commercial File Types in Multi User CAD (69): Ammon Hepworth; C. Greg Jensen; Glen Phelps; Joshua Bennett; Thomas Nysetvold International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 27 of 226

28 Tuesday Afternoon II, 18 June :00 15:20 Coffee Break (Room 5 annex) Registration (Room 2) 15:20 16:50 CAD CAE Integration (M) Chair: Christopher Tierney (Room 5) Curves and Surfaces II (N) Chair: Kenjiro Miura (Room 1) CAD Education (O) Chair: Ferruccio Mandorli (Room 7) 15:20 15:50 A feature and script based integration of CAD and FEA to support design of variant rich products (78): Joel Johansson Algorithm for directional projection of parametric curves onto B spline surfaces (71): Hai Chuan Song; Jun Hai Yong Collaboration Platforms and the Effectiveness of a Virtual Team: A Case Study (66): Gerardo A. Garcia; Pedro Orta; Héctor R. Siller 15:50 16:20 On the use of machine learning to defeature CAD models for simulation model preparation (53): Florence Danglade; Jean Philippe Pernot; Philippe Véron Quasi Log Aesthetic Curves in Polynomial Bézier Form (12): Norimasa Yoshida; Ryo Fukuda; Toshio Saito; Takafumi Saito Analyzing Adaptive Expertise and Contextual Exercise in Computer Aided Design (86): Xiaobo Peng; Prentiss McGary; Elif Ozturk; Bugrahan Yalvac; Michael Johnson; Lauralee Valverde 16:20 16:50 Managing equivalent representations of design and analysis models (29): Christopher Tierney; Declan Nolan; Trevor Robinson; Cecil Armstrong Designing Log aesthetic Splines with G2 continuity (16): Kenjiro Miura; Dai Shibuya; Gobithaasan R.U.; Shin Usuki Negative knowledge and a novel approach to support MCAD education (15): Ferruccio Mandorli; Harald E. Otto 16:50 18:00 Vendor Time and Networking (Room 3) Please visit with our vendors and sponsors Registration (Room 2) 18:00 Free Evening International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 28 of 226

29 Wednesday Morning I, 19 June :00 9:00 Registration (Room 2) 9:00 10:30 Genetic/Optimization Algorithms (P) Chair: Alexander Martha (Room 5) Curves and Surfaces III (Q) Chair: Norimasa Yoshida (Room 1) CAD Applications (R) Chair: Roberto Raffaeli (Room 7) 9:00 9:30 Particle Swarm Optimization (PSO) Based Topology Optimization of Part Design with Fuzzy Parameter Tuning (20): Jianan Lu; Yonghua Chen High quality approximation technique for two offset surfaces adjoining with G1 continuity (22): Naoyuki Satoh; Katsutsugu Matsuyama; Kouichi Konno; Yoshimasa Tokuyama 9:30 10:00 Optimization of assembly processes Shape Analysis of Cubic Bézier of an automobile wire harness (44): Curves Correspondence to Four Masakazu Kobayashi; Masatake Primitive Cubics (83): Takafumi Higashi Saito; Midori Yamada; Norimasa Yoshida 10:00 10:30 Preprocess Optimization for polypropylene laser sintered parts (19): Thomas Reinhardt; Alexander Martha; Gerd Witt; Peter Köhler Simulating a system of locomotion similar to the architecture of the frog via oblique planes (37): Dina Rochman; Sergio Vazquez Parametric Design and Structural Analysis of Deployable Origami Tessellation (8): Nixon Wonoto; Daniel Baerlecken; Russell Gentry; Matthew Swarts A web based platform to support contract furniture design (76): Maura Mengoni; Margherita Peruzzini; Roberto Raffaeli; Damiano Raponi International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 29 of 226

30 Wednesday Morning II, 19 June :30 11:00 Coffee Break (Room 5 annex) Registration (Room 2) 11:00 12:30 Object Archival and Retrieval (S) Chair: Jerry Fuh (Room 5) Bio Engineering II (T) Chair: Remus Tutunea Fatan (Room 1) Circuit Design (U) Chair: Miri Weiss Cohen (Room 7) 11:00 11:30 A review on 3D Object Retrieval methodologies using a part based representation (96): Panagiotis Theologou; Ioannis Pratikakis; Theoharis Theoharis 11:30 12:00 Unsupervised shape classification of convexly touching coated parts with different geometries (45): Rajalingappaa S; Ramamoorthy B.; Ramanathan Muthuganapathy GPU Parallel Computation of Bio Material Damage (88): Vela Diego; Jie Shen; Chi Chow Computer aided dental setup simulation for orthodontic treatment (106): Hong Tzong Yau; Tsan Jui Yang A Design System for 3D Bending Shape of Flexible Printed Circuit in Electronics Device (87): Rie Ohta; Hiromasa Suzuki; Takashi Michikawa; Yutaka Ohtake; Eiji Ohta; Masayosh Hashima; Yuich Sato Computer Aided 3D ICs Layout Design (47): Katarzyna Grzesiak Kopeć; Maciej Ogorzałek 12:00 12:30 Sampling Strategies for 3D Partial Shape Matching and Retrieval Using Bag of Words Model (18): Yan Wang; W.F. Lu; J.Y.H. Fuh Minimization of Bone Removal Through Optimal Humeral Implant Alignment in Total Elbow Arthroplasty (72): Alexander Heroux; Remus Tutunea Fatan; Shaun Salisbury; Ahmad Barari A Decision Support System for Analog Circuit Design using Genetic Algorithms (32): Miri Weiss Cohen; Michaa Aga International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 30 of 226

31 Wednesday Afternoon, 19 June :30 13:30 Lunch Break (Room 5 annex) 13:30 14:30 Keynote K4: Ultra Fast 3D CAD System for Machine Design (Room 5) Speaker: Masaharu Tosu, General Manager, Research & Development Division, icad Ltd., Japan Chair: Allan Spence 14:30 14:50 Coffee Break (Room 5 annex) Registration (Room 2) 14:50 16:50 Workshop: Emotional Engineering Chair: Monica Bordegoni (Room 5) Emotional Engineering is a challenging and fascinating research topic attracting many researchers from various disciplines, including Engineering, Design, Neuroscience, Perception and Cognition, and others. The purpose of this workshop is to gather a community of researchers and practitioners from different disciplines and sectors interested in exchanging and discussing ideas and issues about the emerging role of emotions in the engineering disciplines in order to share a roadmap for further researches and investigations in this new interdisciplinary field. Panelists and Speakers: Shuichi Fukuda, EE SIG Chair (Stanford University and ASME CIE) Monica Bordegoni, EE SIG Co chair (Politecnico di Milano) Marco Maiocchi (Politecnico di Milano) Alberto Gallace (Università Milano Bicocca) 16:50 17:30 Vendor Time and Networking (Room 3) Please visit with our vendors and sponsors Registration (Room 2) 17:30 23:00 Gala Dinner (Wine tasting at La Montina followed by dinner at Villa Baiana): Buses leave from and return to conference site. For those who have purchased tickets. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 31 of 226

32 Thursday Morning, 20 June :00 9:00 Registration (Room 2) 9:00 10:00 Keynote K5: Design for Human Centered Freeform Products: What is the Next? (Room 5) Speaker: Charlie C.L. Wang, Chinese University of Hong Kong, China Chair: Les Piegl 10:00 10:20 Coffee Break (Room 5 annex) Registration (Room 2) 10:20 12:20 Assembly Design (V) Chair: Joshua Summers (Room 5) Reverse Engineering III (W) (Room 1) Chair: Francesca Campana Rapid Prototyping (X) Chair: Chair:Ahmad Barari (Room 7) 10:20 10:50 Virtual Simulation of Assembly Sequencing using Disassembly Method (46): Wen F. Lu; Yoke San Wong 10:50 11:20 Solving under constrained assembly problems incrementally using a kinematic method (62): Yong Liu; Hai Chuan Song; Jun Hai Yong Knowledge management for the selection of 3D digitizing systems in relation with application requirements (94): Nicolas Audfray; Charyar Mehdi Souzani; Claire Lartigue A development of tailor made design system for arm brace(75): Katsutoshi Ootsubo; Kazuya Kobayashi, G.; Ken Yamaguchi Slice Generation and Data Retrieval Algorithm for Rapid Manufacturing of Heterogeneous Objects (39): Vikas Gupta; Puneet Tandon Robust Slicing Procedure based on Surfel Grid (11): Di Qi; Long Zeng; Matthew, M. F. Yuen 11:20 11:50 Template based geometric transformations of a functionally enriched DMU into FE assembly models (65): Flavien Boussuge; Ahmad Shahwan; Jean Claude Léon; Stefanie Hahmann; Gilles Foucault; Lionel Fine 11:50 12:20 Design Enabler to Recognize Duplicate Geometries in CAD Assemblies (3): Aravind Shanthakumar; Joshua Summers A computational method for bilateral symmetry recognition in asymmetrically scanned human faces (41): Luca Di Angelo; Paolo Di Stefano Direct Slicing of surface models in CAD systems for rapid manufacturing applications (17): Alexander Martha; Peter Köhler Study of a point cloud Adaptive Slicing Approach to Control segmentation with part type Surface Error Factor in Rapid recognition for automatic Prototyping Process (82): Snahungshu tolerance inspection of plastic Sikder; Ahmad Barari; Hossam components via Reverse Kishawy Engineering techniques (92): Francesca Campana; Michele Bici; Luca Tito; Stefano Petriaggi International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 32 of 226

33 Thursday Afternoon, 20 June :10 13:30 Lunch Break (Room 5 annex) 13:30 14:00 Virtual Prototyping II (Y) Chair: Daniele Regazzoni (Room 5) Model Reconstruction (Z) Chair: Masaji Tanaka (Room 1) 13:30 14:00 Methods Of CAD Based Automation A method to analyze 2D vector And Simulation By The Example Of floor plan and reconstruct 3D Virtual Stone Chipping Testing (43): models (101): Markus Ernst; Mario Hirz; Severin Junfang Zhu; Hui Zhang; Yamei Stadler Wen 14:00 14:30 Identification of Weld Beads in Assemblies of B Rep Models (40): Roberto Raffaeli; Marco Mandolini; Michele Germani Reconstruction of 3D geometry of general curved surfaces from a single image (85): Alok Jha; B Gurumoorthy CAD Support (AA) Chair: Niccolò Becattini (Room 7) The importance of geometric trace in the accuracy of models (38): Marisol Anguiano; Carlos Flores; Dina Rochman CAD Feature Extraction Using Opitz Coding System (108): Leila Zehtaban; Dieter Roller 14:30 15:00 Digital Human Models and Virtual Ergonomics to Improve Maintainability (99): Daniele Regazzoni; Caterina Rizzi A Feature Based Method to Reconstruct 3D Models from sketches of Mechanical Parts (80): Masaji Tanaka Question/answer techniques within CAD environments: an investigation about the most effective interfaces (4): Niccolò Becattini; Yuri Borgianni; Gaetano Cascini; Federico Rotini 15:00 15:15 Wrap Up (Room 5) Chair: Allan Spence International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 33 of 226

34 AN ANNUAL, INTERNATIONAL CONFERENCE CONNECTING PEOPLE IN CAD/CAM/CAE RESEARCH, EDUCATION AND BUSINESS 11th Annual CAD Conference June 23 26, 2014 Hong Kong, China It is a pleasure to announce that the 11th annual International CAD Conference and Exhibition will be held at the Hong Kong University of Science and Technology, China, June 23 26, Opened in 1991, The campus occupies a beautifully landscaped 150 acre site on Clear Water Bay peninsula in East Kowloon, less than 30 minutes from Central Hong Kong. It is easily reached by taxi from the Hong Kong International Airport (HKG). Hong Kong is a First Class Asia World City, with many, many towering skyscrapers, a Ladies Market, Tsim Sha Tsui Promenade, Temple Street Night Market, The Big Buddha and Po Lin Monastery, and beautiful views from Victoria Harbour. There are many festivals, and wonderful food. Just beyond is the Pearl River Delta, and of course mainland China. Contributions from all aspects of CAD are expected including Modeling, Analysis, High Performance Graphics, Data Management, Knowledge Engineering, Collaborative Design, Reverse Engineering, and Prototyping. Applications can be in Architecture, Bio Medicine, Civil Engineering, Fashion Industry, Industrial Design, Sustainable Energy Design, etc. International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 225 of 226

35 CORE ORGANIZATION Host Chairs: Ajay Joneja, Hong Kong University of Science & Technology Weiyin Ma, City University of Hong Kong General Chair: Al Spence, McMaster University, CANADA Lead Paper Chair: Wim Bronsvoort, Delft University of Technology, THE NETHERLANDS Journal Publications Chair: Les Piegl, University of South Florida, USA WEBSITES Conference: Journal: IMPORTANT DATES November 4, 2013 Extended Abstract Submission System Opens January 6, 2014 Extended Abstract Submission Deadline: See conference website for details. January 20, 2014 Extended Abstract Decisions February 17, 2014 Invited Journal Manuscript Submission Deadline March 17, 2014 Journal Manuscript Decisions April 11, 2014 Registration and Visa Assistance Deadline At least one author must register by this date. May 2, 2014 Author Submitted Final Materials Deadline June 23 26, 2014 CAD 14 at Hong Kong University of Science and Technology, China International CAD Conference and Exhibition, Final Program CAD 13 Volume 10 Page 226 of 226