8 th International Conference on Flat Bottom Tanks. November 6 7, 2012, Munich, Germany. TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH

Transcription

1 International Conferences 8 th International Conference on Flat Bottom Tanks November 6 7, 2012, Munich, Germany Supported by: TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH

2 The conference The aim of the 8 th International Conference on Flat bottom Tanks is to prepare for the implementation of new rules and regulations, as from 2015 additional requirements concerning pollution control need to be considered. Planners and operators are faced by the abolition of the existing technical rules for storage plants with burnable liquids by the end of 2012, the new regulations on water act, which will be implemented in 2013, and the current introduction of European standards. Presentations with practical relevance from German and international speakers respond to these topics. The conference addresses to Chemical and mineral oil industry as well as energy provider companies Constructors of plants with flat bottom tanks Manufacturers of flat bottom tanks Specialized companies and suppliers for flat bottom tanks Government agencies and associations responsible for environmental protection, prevention of water pollution and building legislation Experts Conference Chairman Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich Interested companies have the opportunity to present their products and services in the exhibition which will be held parallel to the conference.

3 Agenda on Tuesday, November 6, :30 Welcome Winfried Schock, TÜV SÜD Industrie Service GmbH, Munich, DE 9:45 Introduction Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich, DE Emission Reduction and Control Standards, Activities and Experience Reports 10:15 The amendment of the 20 th German Federal Emission Protection Directive (BImschV), legal immission control requirements for storage tanks with gasoline, blended fuels and naphtha Karen Pannier, Umweltbundesamt, Dessau, DE 10:45 Influence of venting technology on emission reduction Michael Davies, Braunschweiger Flammenfilter GmbH, DE 11:15 Coffee break 11:45 Alternative emission reduction methods at storage tanks with volatile hydrocarbons Thomas Schirmer, Ingenieurbüro Imhof GmbH, Mühlheim am Main, DE 12:15 Vapour reduction by the use of full contact and/or pontoon type internal floating roofs and aluminium domes international experience Mario Strache, Elsont Group, Storage Tank Equipment, Buochs, CH 14:00 Detection methods for product emissions and odorours substances Norbert Botz, BAYERNOIL Raffineriegesellschaft mbh, Neustadt, DE International Requirements for Construction and Operation of Flat Bottom Storage Tanks 14:30 The United States Environmental Protection Agency's Oil Spill Prevention Program and regulations for aboveground storage tanks Mark W. Howard, U.S. Environmental Protection Agency's (USEPA), Wahington, DC, USA (inquired) 15:00 Overview of the legislation and standards in Slovenia regarding flat bottom tanks planing and construction Ales Povse, Petrol, Ljubljana, SLO 15:30 Coffee break 16:15 Inspection and maintenance according to EEMUA 159 guideline Jan de Jong, D&C engineering, Alblasserdam, NL, Chairman of EEMUA Storage Tank Committee 17:00 Laser scanning as a complement to Magnetic Flux Leakage inspections Vincent Lesueur, SCOPEO, Le Havre, FRA 17:30 End of first conference day 19:00 Evening Programme 12:45 Lunch

4 Agenda on Wednesday, November 7, 2012 Tank Farm Design and Organisational Responsibilities 8:30 Federal standard ordinance on facilities for handling substances hazardous to water current state Thomas Wagner, Bayerisches Landesamt für Umwelt, Augsburg, DE New VdTÜV-Merkblatt Storage facilities with stationary tanks, filling and emptying facilities 9:00 Legal framework, structure, potential for fire safety, construction requirements for bunds and storage rooms Dr. Hermann Dinkler, VdTÜV - Verband der TÜV e.v., Berlin, DE 9:30 Protective strip, planning of zones, retention of water for firefighting, flame arresters, active storage Dr. Dirk-Hans Frobese, Physikalisch-Technische Bundesanstalt, Braunschweig, DE 10:00 Learning from accidents Mark Hailwood, Karlsruhe, DE 10:30 Coffee break 11:00 Fires and explosions at bulk petroleum storage facilities: What has happened after Buncefield? Marshall Mott-Smith, Mott-Smith Consulting Group LLC, Tallahassee, FL, USA 11:20 Overview of standards and rules which have to be respected for flat bottom storage tanks in Germany Peter Ball, TÜV SÜD Industrie Service GmbH, Munich, DE New Challanges 11:50 The latest revision of EN Jan de Jong, D&C engineering, Alblasserdam, NL 12:05 Seismic design: application of Eurocodes to storage tanks for liquefied gases according to EN Richard Albert, Aachen, DE 12:30 Lunch 13:45 References to the seismic calculation and structural design of cylindrical flat bottom tanks Dr. Burkhard Hänelt, Ingenieurbüro Dr. Hänelt + Dr. Münzer, Bad Bramstedt, DE 14:15 Performance-based seismic design of tanks with Energy-Dissipating Anchors Dr. Praveen K. Malhotra, P.E., StrongMotions Inc., Sharon, MA, USA 14:45 Lightning and static protection for above ground storage tanks Bruce Kaiser, Ligtning Master Corporation, Clearwater, FL, USA 15:05 Faom agents for E10 fire fighting and for foam-systems conform with EN Martin Gorski, Fabrik chemischer Präparate von Dr. Richard Sthamer GmbH & Co.KG, Hannover, DE 15:30 Outlook and farewell Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich, DE

5 Participation fee 850, plus current VAT (if applicable) The registration fee includes conference documentation, lunch and drinks during breaks as well as the evening event. Conference venue Alte Kongresshalle Theresienhöhe Munich, Germany You will receive travel and hotel information with the confirmation of your registration Registration and information TÜV SÜD Akademie GmbH International Conferences Susanne Hummler Westendstraße Munich, Germany Phone Fax å

6 Registration by Fax or and on 8 th International Conference on Flat Bottom Tanks November 6 7, 2012, Munich, Germany Name and Title (if applicable) First Name Company Department VAT No. (mandatory for EU member states excl. Germany). This number should be used for all services purchased from TÜV SÜD Akademie GmbH. Street Country / Zip Code / City Phone Yes, I hereby agree to receive further information via via Phone Note: According to Art. 28 BSDG (German Data Protection Act) you may withdraw your consent to the use of your personal data for advertising purposes by TÜV SÜD Akademie GmbH informally, at any time and free of charge. TÜV SÜD Akademie GmbH, AC-TuK, Westendstr. 160, Munich (Germany); congress@tuev-sued.de; Fax: Invoice address (if different from above): Name / Company Address Registration fee: 850, plus current VAT (if applicable) Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge. In case of cancellation beyond this deadline and up to the third working day prior the event, 50 % of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to participate in the event, the full amount of the invoice shall be due. I accept changes in the programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH. Date Signature