MEDICAL DEVICES SECTOR MANUAL FOR THE TECHNICIAN. Language: ENGLISH Cod: 9046 STEAM STERILIZER SERENA THE NEW GENERATION

Transcription

1 MEDICAL DEVICES SECTOR MANUAL FOR THE TECHNICIAN Language: ENGLISH Cod: 9046 STEAM STERILIZER SERENA THE NEW GENERATION Autoclave SERENA/Manual for technician/rev.02/ Pagina 1

2 SUMMARY 1. ACCESS TO THE MENU WITH PASSWORD LOGO SERIAL NUMBER SW VERSION CALIBRATION CHAMBER PRESSURE T1 CHAMBER TEMPERATURE PROBE T2 CHAMBER- TEMPERATUREPROBE T3 VAPORIZER T4 BODY T5 RESISTANCE T6 RADIATOR CONDUCTIVITY METER INCREASE BAR TIMED REFILLING VACUUM MAX VACUUM DRY VAPORIZER TEMPERATURE IRON TEMPERATURE CHAMBER IRON TEMPERATURE CHAMBER IRON TEMPERATURE DRYING PHASE EXTERNAL RESISTANCE TEMPERATURE RADIATOR TEMPERATURE CHECK ACTUATORS FUSES SCHEME TECHNICAL EQUIPMENT CALIBRATION AND ALIGNMENT COLD PROBES ALIGNMENT PROBES ALIGNMENT ON TEMPERATURE CALIBRATION RESET COUNTERS SPARE PARTS Autoclave SERENA/Manual for technician/rev.02/ Pagina 2

3 1. ACCESS TO THE MENU WITH PASSWORD PASSWORD Warning! Menu without security! For authorized technician only.. SETTINGS CONFIGURATIONS Contact the Manufacturer for access to the password. We recommend the extreme confidentiality of the same! After entering the password hold START until the display turns on. Press START and the following screen will open 1.0 LOGO LOGO SERIAL NUMBER SW VERSION CALIBRATION INCREASE BAR FILLING Autoclave SERENA/Manual for technician/rev.02/ Pagina 3

4 We do not recommend change the logo, but only to display it. LOGO S E R E N A O N L Y B C Y C L E 1.1 SERIAL NUMBER LOGO SERIAL NUMBER SW VERSION CALIBRATION INCREASE BAR FILLING We do not recommend change the serial number. SERIAL NUMBER SW VERSION LOGO SERIAL NUMBER SW VERSION CALIBRATION INCREASE BAR FILLING Autoclave SERENA/Manual for technician/rev.02/ Pagina 4

5 We do not recommend change the SW version. SW VERSION CALIBRATION Warning! Before proceeding to calibration, the machine must be completely cold and preheating must be switched off! LOGO SERIAL NUMBER The following screen will appear SW VERSION CALIBRATION INCREASE BAR FILLING CHAMBER PR. T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE By using a certified instrument, adjust the calibration so that the data on the display corresponds to the test instrument CHAMBER PRESSURE CHAMBER PR mbar 1000 mbar Autoclave SERENA/Manual for technician/rev.02/ Pagina 5

6 1.3.2 T1 CHAMBER TEMPERATURE PROBE CHAMBER PR. T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T1 CHAMBER +0.2 C C To proceed to the alignment of the sensors T1 and T2, see pg T2 CHAMBER- TEMPERATUREPROBE PR.CHAMBER T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T2 CHAMBER +0.2 C C Autoclave SERENA/Manual for technician/rev.02/ Pagina 6

7 1.3.4 T3 VAPORIZER PR. CHAMBER T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T3 VAPORIZER +0.9 c C T4 BODY CHAMBER PR. T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T4 BODY +0.3 C C Autoclave SERENA/Manual for technician/rev.02/ Pagina 7

8 1.3.6 T5 RESISTANCE PR. CHAMBER T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T5 RESISTANCE +0.6 C C T6 RADIATOR T1 CHAMBER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T6 RADIATOR T6 RADIATOR +0.1 C C Autoclave SERENA/Manual for technician/rev.02/ Pagina 8

9 1.3.8 CONDUCTIVITY METER T2 CHAMBER T3 VAPORIZER T4 BODY T5 RESISTANCE T6 RADIATOR CONDUCTIVITY METER Warning! By a certified instrument verify the quality of water in the tank. Take a small amount of water from the blue grasp and proceed with the verification. THE FIRST THREE NUMBERS are used for calibration. Act with up / down arrow to change so that the other three numbers correspond to the value found with the certificated instrument. Values are expressed in µs. CONDUCTIVITY METER micro 1.4 INCREASE BAR LOGO SERIAL NUMBER SW VERSION CALIBRATION INCREASE BAR REFILLING It detects the pressure (P) during vacuum phases. INCREASE BAR 1300 mbar Autoclave SERENA/Manual for technician/rev.02/ Pagina 9

10 1.5 TIMED REFILLING SERIAL NUMBER SW VERSION CALIBRATION INCREASE BAR TIMED REFILLING TIMED REFILLING 090 s ONLY IN THE MANUAL REFILLING:The value indicates the seconds that remains active the pump for filling water clean. To change the values act on up / down arrow. 1.6 VACUUM MAX SW VERSION CALIBRATION INCREASE BAR TIMED REFILLING VACUUM MAX It is the max depression that the sterilizer must achieve in the vacuum phases. It is also the point of alarm in case the vacuum does not occur. VACUUM MAX 0250 mbar Autoclave SERENA/Manual for technician/rev.02/ Pagina 10

11 1.7 VACUUM DRY CALIBRATION INCREASE BAR TIMED REFILLING VACUUM MAX VACUUM DRY The values (D) indicate the range in which the bacteriological filter is activated VACUUM DRY MIN 0240 mbar MAX 0400 mbar 1.8 VAPORIZER TEMPERATURE TIMED REFILLING VACUUM MAX VACUUM DRY VAPORIZER TEMPERATURE The following screen will appear: The values indicate the range in which occurs the injection of water that becomes steam. VAPORIZER TEMPERATURE MIN 150 C MAX 160 C 1.9 IRON TEMPERATURE CHAMBER 121 The values indicate he temperature during all the phases EXCLUDED THE DRY, that is the DRYING PHASE. Autoclave SERENA/Manual for technician/rev.02/ Pagina 11

12 VACUUM MAX VACUUM DRY VAPORIZER TIMED IRON TEMPERATURECHAMBER 121 The values indicate the range in which the resistance tries to maintain the temperature of the metal The following screen will appear. IRON TEMPERATURE CHAMBER 121 MIN 110 C MAX 117 C 1.10 IRON TEMPERATURE CHAMBER 134 The values indicate the temperature during all the phases EXCLUDED THE DRY, hat is the DRYING PHASE. VACUUM MAX VACUUM DRY VAPORIZER TEMPERATURE IRON TEMPERATUE CHAMBER 134 IRON TEMPERATURE CHAMBER 134 MIN 132 C MAX 138 C The values indicate the range in which the resistance tries to maintain the temperature of the metal Autoclave SERENA/Manual for technician/rev.02/ Pagina 12

13 1.11 IRON TEMPERATURE DRYING PHASE IRON TEMPERATURE CHAMBER 121 IRON TEMPERATURE CHAMBER 134 IRON TEMPERATURE DRYING PHASE IRON TEMPERATURE DRYING PHASE 115 C The value indicates the temperature ONLY during the DRYING phase EXTERNAL RESISTANCE TEMPERATURE IRON TEMPERATURE CHAMBER 121 IRON TEMPERATURE CHAMBER 134 IRON TEMPERATURE DRYING PHASE EXTERNAL RESISTANCE TEMEPRATURE EXTERNALE RESISTANCE TEMPERATURE MIN 140 C MAX 145 C The values indicate the range within which the resistance band is still active. Autoclave SERENA/Manual for technician/rev.02/ Pagina 13

14 1.13 RADIATOR TEMPERATURE IRON TEMPERATURE DRYING PHASE EXTERNAL RESISTANCE TEMPERATURE RADIATOR TEMEPRATURE RADIATOR TEMPERATURE MIN 080 C MAX 085 C The values indicate the range of the temperature of the drain water 1.14 CHECK ACTUATORS IRON TEMPERATURE DRYING PHASE EXTERNAL RESISTANCE TEMPERATURE RADIATOR TEMPERATURE CHECK ACTUATORS CHECK A E Autoclave SERENA/Manual for technician/rev.02/ Pagina 14

15 PRESS START to verify the actuators 2 CHECK ACTUATOR: A => clean water above the minimum level B => clean water above the maximum level C => dirty water tank full E => open door D => door approached F => closed door EV VAC => 3-way electro valve EV LOAD => vaporizer pump EV DSCH => water drain electro valve EV VAP => not connected EV BYPS => bypass electro valve EV FLT => bacteriological filter electro valve EV RETE (NETWORK) => purifier electro valve VENT => condenser fan P. VAC => vacuum pump P. LOAD => charging pump clean water tank R. CHAM => resistance chamber R.VAP => vaporizer resistance CLOSE DOOR => the engine is in the closed position and the micro are activated OPEN DOOR => it opens and closes the door without considering the pressure. Warning! Before opening the door verify that the pressure of the chamber is under vacuum or ambient pressure. IMPORTANT NOTE: do not hold START when you do NOT hear the engine noise (ENGINE UNPROTECTED). If you are unable to open the door in any way, proceed as follows: SETTINGS-> CONFIGURATION-> PASSWORD -> CHECK ACTUATOR -> OPEN DOOR -> START press the button and release immediately when open the door! In the process disappears F and appear the E. Release the button just disappears the F and opens the door. Do not hold pressed the button when appears the E! Otherwise, the motor of the door BURNS (menu without protection!). Use this procedure to open the door in case of EMERGENCY! MENU WITHOUT PROTECTION! Danger of burning the motor of the door! Press ESC to exit and return to the main menu Warning! If the controls do not respond properly, it is necessary to check the two fuses alongside the electronic card. The correct positioning of the fuses is marked by a small noise of joints. Small vibrations of the writings on the display indicate that there are anomalies in some component. Water consumption: 1 lt every 2200 cycles -> 0,45 cc for 1 cycle Autoclave SERENA/Manual for technician/rev.02/ Pagina 15

16 3 FUSES SCHEME T1: Transformer F1 (250V T3,15A 5X20): It protects the power P. load, P. Vacuum, Fan, E.V. system, E.V. bacteriological filter, E.V. by pass, E.V. vaporizer, E.V. drainage, E.V. load vaporizer pump, E.V. vacuum pump F2 (250V T3,15A 5X20): It protects the power P. load, P. Vacuum, Fan, E.V. system, E.V. bacteriological filter, E.V. by pass, E.V. vaporizer, E.V. drainage, E.V. load vaporizer pump, E.V. vacuum pump F3 (250V T500mA 5X20): It protects the power of the display and the SD card low-voltage components BT: Battery (VARTA CR2032 3Vdc) 4 TECHNICAL EQUIPMENT MINIMUM EQUIPMENT THAT THE TECHNICIAN MUST HAVE AT DISPOSAL FOR THE CALIBRATION: CERTIFIED THERMOMETER WITH PROBE NO MORE THAN 3.2 mm INSTRUMENT FOR MEASURING THE ENVIRONMENTAL PRESSURE INSTRUMENT FOR MEASURING THE QUALITY 'OF WATER TESTER TO VERIFY THE CONSUMPTION TESTER TO CHECK THE SHORT CIRCUITS AND RESISTANCES ALWAYS KEEP AN ORIGINAL PACKING AVAILABLE FOR EVENTUAL SHIPMENT OF THE STERILIZER Note: All instruments must have the calibration certificate not expired! INSTRUMENT FOR MEASURING THE QUALITY 'OF WATER Autoclave SERENA/Manual for technician/rev.02/ Pagina 16

17 5 CALIBRATION AND ALIGNMENT OPTIONS ->OPENING DOOR -> START OPENING DOOR START Once pressed START, use the arrows UP / DOWN to VISUALIZE THE TEMPERATURE T1 c Tv c Tr c Pr mb. Volt T2 c Tm c Tc c Vo im. Micron A DF Press INFO button to visualize the technician data with the door closed T1 chamber probe temperature Tv vaporizer probe temperature Tr chamber resistance temperature Pr chamber mb pressure T2 chamber probe temperature Tm chamber metal temperature Tc condenser temperature Vo water quantity volume Autoclave SERENA/Manual for technician/rev.02/ Pagina 17

18 The data shown in the first line (eg +1.1 C) corresponds to the delta T of Calibration. The data shown in the second row (eg C) corresponds to the temperature detected at that time. 5.0 COLD PROBES ALIGNMENT To align the probes temperatures, proceed as follow: 1. Remove the outer casing 2. Unscrew the cap of ¼ placed on the top of the sterilization chamber 3. Introduce a certified thermometer 4. Start a 134 universal sterilization cycle 5. Wait until the maintenance phase is reached and the temperature has stabilized 6. About half of the PPH phase, press the info button to view the temperatures T1 and T Record the temperature of the certified thermometer of T1 and T2 Example: CERTIFIED THERMOMETER SHOWS T1 and T2 SHOWS At the end of the sterilization cycle, go to the SETUP menu and provide the CALIBRATION. As in the example T1 should be increased of +5 and T2 of At this point, the probes should be perfectly aligned 10. Make a further test cycle to ensure that the alignment is done properly. Autoclave SERENA/Manual for technician/rev.02/ Pagina 18

19 5.1 PROBES ALIGNMENT ON TEMPERATURE a) Start the sterilization cycle at 134 PRIONE b) In the middle of the sterilization phase (STR), proceed as follows: - Press and hold INFO. Within 5 seconds after you pressed INFO, press and release at least 5 times, pressing UP (UP ARROW). The menu T1 appears. - From now on, whenever you press INFO, it enters the pages T1-T2-INFO - To return to the usual mode, press and hold INFO for more than 5 seconds. c) At a pressure of mbar, align the temperature to Autoclave SERENA/Manual for technician/rev.02/ Pagina 19

20 6 CALIBRATION SETTINGS -> CONFIGURATIONS -> PASSWORD (hold START for 5 seconds till the menu appears) - >CALIBRATION Proceed with the calibration using UP / DOWN buttons Press ESC to confirm LOGO SERIAL NUMBER SOFTWARE VERSION CALIBRATION INCREASE BAR TEMP. REFILLING. VACUUM MAX VACUUM DRY VAP. TEMPERATURE. IRON CHAMBER TEMP. 121 IRON CHAMBER TEMP 134 IRON TEMP. DRYING PHASE TEMP.EXT. RESISTANCE RADIATOR TEMP. ACTUATORS CHECK LOGO it is possible to change the pre-existing logo SERIAL NUMBER it is the serial number given to the machine SOFTWARE VERSION it is assigned by the provider and identifies a type of software installed CALIBRATION the most important calibrations are PR - T1, T2 and μs INCREASE BAR it is the maximum pressure during the vacuum peaks TIMER FILLING Min 000s Max 180s It is the time in which the filling clean water pump is primed. MAX VACUUM (0300mb) It is the maximum vacuum that the machine reaches more an x time. If does not go under it the machine goes into alarm DRY VACUUM min 0500mb max 0900mb vacuum during drying phase When it reaches the 0500mb it opens the valve of the bacteriological filter till 0900mb VAPORIZER TEMPERATURE min 140 C, max 150 C The vaporizer is turned on until the beginning of sterilization. The pump that will produce steam injects water between the two temperatures established. 121 CHAMBER IRON TEMPERATURE min 120 C, max 125 C max It is the metal temperature of the chamber during the 121 cycle 134 CHAMBER IRON TEMPERATURE min 132 C, max 138 C max It is the metal temperature of the chamber during the 134 cycle IRON TEMPERATURE DRYING PHASE It is the metal temperature of the chamber during the drying phase115 EXTERNAL RESISTANCE TEMPERATURE min. 140 C, max 145 C It is the maximum temperature that the resistance can reach RADIATOR TEMPERATURE min. 080 C, max 085 C It is the maximum temperature for condensing the steam The values shown are purely indicative and subject to change. Before the amendment contact the manufacturer for updated data 7 RESET COUNTERS The machine is equipped with counters that indicate the time when is important to change some details, such as the door gasket and the bacteriological filter. Once proceeded with the replacement of spare parts, it is important to reset the counter to zero by performing the following operation -> MAINTENANCE: - Position on the counter - Simultaneously press the down and up arrow for a few seconds until it resets Autoclave SERENA/Manual for technician/rev.02/ Pagina 20

21 8 SPARE PARTS 5189 ELECTRONIC POWER BOARD ASSEMBLY Nr. Cod. Description Q.ty ELECTRIC BOX SPACER M3X SCREW M5X10 TBCE NUT M SPACER M3X SPACER M3X SCREW M3X SCREW M5X CROSS CABLE DOOR AND WATER WIRING ACTUATOR AMPI8 WIRING ACTUATOR AMPI6 WIRING ELECTR. POWER BOARD F3 FUSE T500mA5x F1 F2 FUSE T3,15 5X BATTERY CR2032 3Vdc 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 21

22 5081/ /23lt. PHASE 1 Nr. Cod. Description Q.ty BACTERIOLOGICAL FILTER F JUNCTION BLACK F JUNCTION WITE DOOR COVER INSIDE COVER FILTER 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 22

23 5081/ /23lt. PHASE 1 Nr. Cod. Description Q.ty DOOR MICROSWITCH INOX CHAMBER 18lt INOX CHAMBER 23lt T1-T2 PT1000 PROBE SAFETY VALVE 2,5bar PLUG M 1/ L CONNECTION M 6/4 1/ CONNECTION M 6/4 1/ CROSS CONNECTION MF 1/ CONNECTION M 6/8 1/4 (From ) 1 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 23

24 5081/ /23lt. PHASE 1 Nr. Cod. Description Q.ty ALLUMINIUM BELT 23lt ALLUMINIUM BELT 18lt HEATER THERMOSTAT HEATER HEATING PROBE PT COVER CHAMBER 18lt COVER CHAMBER 23lt PT1000 PROBE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 24

25 5081/ /23lt. PHASE 1 Nr. Cod. Description Q.ty MICROSWITCH UNIT ELECTRIC MOTOR UNIT 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 25

26 5197 DOOR ASSEMBLY Nr. Cod. Description Q.ty Nr. Cod. Description Q.ty HINGE PIVOT CAST DOOR NUT M HINGE FLANGE WASHER Ø6X SCREW VTE 8X65 UNI 5737 ZB SCREW TSP M5X DOOR BLOCK WASHER Ø10.5X20X INOX SHELL DOOR BRACKET FOR STUD RING FOR STUD SCREW M5X SILICON GASKET WASHER Ø5X15X LARGEST STUD 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 26

27 5198 SD CARD AND PRINT CABLE ASSEMBLY Nr. Cod. Description Q.ty CONTROL BRACKET SCREW M3X WASHER Ø SCREW M3X SPACER M3X SPACER M3X POWER CABLES PRINTER LABELLER WIRING GREEN SWITCH SD CARD BOARD SD CARD WIRING SD CARD 4GB 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 27

28 5186 TRASNDUCER ASSEMBLY Nr. Cod. Description Q.ty TRANSDUCER SUPPORT TRANSDUCER 18/ COPPER WASHER ¼ CONNECTION F 6/4-1/ TRANSDUCER CABLE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 28

29 5151 USED WATER TANK ASSEMBLY Nr. Cod. Description Q.ty PLASTIC TANK LEVEL FLOAT PROBE HOSE 8 1/ CONNECTION INOX 1/ TANK COVER SPRING BLOCK 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 29

30 5149 FILL WATER TANK ASSEMBLY Nr. Cod. Description Q.ty PLASTIC TANK LEVEL FLOAT PROBE TEFLON HOSE 6X4X L CONNECTION 6-1/ CONNECTION INOX 1/ HOSE 8 1/ TANK COVER SPRING BLOCK 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 30

31 5244 WATER DRAIN HOSE 5245 FILL WATER HOSE 5364 EMERGENCY FILL WATER HOSE Nr. Cod. Description Q.ty EMERGENCY FILL WATER HOSE NUT 8/6-1/ TRASPARENT SILICON HOSE FUNNEL FILL WATER HOSE TRASPARENT SILICON HOSE QUICK CONNECTION Ø8mm WATER DRAIN HOSE RED SILICON HOSE QUICK CONNECTION Ø8mm 1 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 31

32 5363 DISPLAY ASSEMBLY Nr. Cod. Description Q.ty DISPLAY FRONT COVER SCREW 3.9X9.5 TSP DISPLAY WIRING DISPLAY PROTECTION KEYBOARD 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 32

33 5695 STEAM GENERATOR AND VOLUMETRIC COUNTER ASSEMBLY Nr. Cod. Description Q.ty Nr. Cod. Description Q.ty C THERMOSTAT L CONNECTION FOR PUMP ONE WAY VALVE SILICON HOSE Ø5X9 L= N.C. SOLENOID VALVE 1/ FILTER 1/ STEAM GENERATOR SUPPORT EARTH CABLE VIBRATION PUMP STEAM GENERATOR CABLE PUMP SUPPORT HOSE CLAMP T CONNECTION SHORT SPRING VOLUMETRIC COUNTER /F HEATING HELEMENT SILICON HOSE Ø5X9 L= STEAM GENERATOR FRAME FELT FIBERGLASS PT1000 PROBE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 33

34 5333 COIL 18lt. ASSEMBLY Nr. Cod. Description Q.ty SCREW 4X16 TSP COIL SUPPORT RADIATOR NUT M FAN 18LT SCREW 3,9X13 TCI PT1000 PROBE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 34

35 5191 COIL 23lt. ASSEMBLY Nr. Cod. Description Q.ty SCREW 5X20 TSEI RADIATOR FAN 23LT SCREW 3,9X13 TCI COIL SUPPORT PT1000 PROBE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 35

36 5181 SOLENOIDS VALVES ASSEMBLY Nr. Cod. Description Q.ty Nr. Cod. Description Q.ty SOLENOIDS VALVES SUPPORT SILICON HOSE 7X13 L= N.C. SOLENOID VALVE 1/ T CONNECTION 1/ L CONNECTION HOSE 1/ SILICON HOSE 7X13 L= SILICON HOSE 8X5 L= CONNECTION HOSE 1/ WAY SOLENOID VALVE ONE WAY VALVE L CONNECTION 6/4-1/ L CONNECTION HOSE 1/ L CONNECTION 1/8 2 Autoclave SERENA/Manual for technician/rev.02/ Pagina 36

37 5154 FILL WATER PUMP ASSEMBLY Nr. Cod. Description Q.ty Nr. Cod. Description Q.ty T CONNECTION WATER CONDUCTIVITY METAL CLAMP SPRING CENTRAL BRIDGE WATER FILTER TANK SUPPORT VIBRO-PUMP MAMMUT FASTON 12 PLACE /8 CONNECTION SILICON HOSE 7X13 L= RUBBER ANTI-VIBRATION SILICON HOSE 7X13 L= WATER CONDUCTIVITY WIRE 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 37

38 Nr. Cod. Description Q.ty FUSE 5X20T 12A EARTH TERMINAL PG9 NUT ELECTRIC CABLE WITH PLUG FUSE TERMINAL FIX CABLE PG9 1 Autoclave SERENA/Manual for technician/rev.02/ Pagina 38

39 5305 VACUUM PUMP 23lt. ASSEMBLY Nr. Cod. Description Q.ty VACUUM PUMP SUPPORT RED SILICON HOSE L=500mm VACUUM PUMP 23LT VACUUM PUMP PROTECTION WATER FILTER GROUP RED SILICON HOSE L=50mm T CONNECTION M RED SILICON HOSE L=200mm SILICON HOSE 8x5 L=20mm 2 Autoclave SERENA/Manual for technician/rev.02/ Pagina 39

40 lt. Nr. Cod. Description Q.ty VACUUM PUMP SUPPORT VACUUM PUMP 18LT T CONNECTION M WATER FILTER GROUP RED SILICON HOSE L=50mm 2 Autoclave SERENA/Manual for technician/rev.02/ Pagina 40

41 5104 VACUUM PUMP 18lt. Autoclave SERENA/Manual for technician/rev.02/ Pagina 41