Ultra fluid dispensing systems and dispensing components
|
|
- Neil Blankenship
- 8 years ago
- Views:
Transcription
1 Ultra Dispensing Systems Price list: November 1, 2005 A NORDSON COMPANY Ultra fluid dispensing systems and dispensing components Ultra dispensers Hand-lever dispense valves...4 Portable hand dispensers...5 Dispensing components Syringe barrels...6 Syringe barrel adapter assemblies...7 Dispensing tips Cartridge reservoir systems...10 Syringe barrel loaders...11 Productivity tools and accessories Special purpose dispensing systems HPx high-pressure dispensing system...15 Mikros pen system...15 For application assistance or to place an order, call Fax: customersupport@efd-inc.com All major credit cards accepted. Shipments are made within 24 hours of receipt of order. FOB East Providence, RI. Net 30 days. Minimum order $50 USD. Prices subject to change. All components produced silicone-free.
2 Ultra dispensing workstation The Ultra 2400 Dispensing Workstation is the most complete system on the market, ships with all necessary hardware for production, and offers a full range of optional dispensing productivity tools. A variety of dispensing components is included with the system. Your EFD Fluid Application Specialist will recommend specific components for your application. The Ultra 2400 Workstation is covered by our Ten Year No-Fault Warranty (requires clean, dry, filtered plant air). Ultra 2400 Series Dispensing system includes Ultra 2400 with work panels, cabinet-mounted syringe barrel holder, wire adapter hose holder, omnidirectional foot pedal, ergonomic hand grip, universal power pack, input air hose and fitting, User s Guide, Quick Start Guide, (1) box of tip caps, (2) boxes of customer-selected Ultra syringe barrel/piston sets, (2) boxes of customer-selected dispense tips, and (1) adapter assembly. Ultra $ 1, to 100 psi (0 to 6.9 bar) air pressure regulator Ultra $ 1, to 15 psi (0 to 1.0 bar) air pressure regulator Ultra $ 1, to 5 psi (0 to 0.34 bar) air pressure regulator Workstation productivity tools See page 12 for a complete line of Ultra 2400 workstation productivity tools: Workstation lamp Hand grip with finger switch Magnification lens And more! Select the components for your Ultra dispensing workstation. Choose (2) syringe barrel/piston sets, (2) boxes of dispense tips and (1) adapter assembly. Filter regulator Proper operation of dispenser requires clean, dry, filtered plant air. Order if your air supply is not filtered. See page 14 for details. 2000F755...$ Five-micron filter regulator 2000F756...$ Regulator with coalescing filter 2000F $ Filter element replacement kit To place an order or for application assistance, call customersupport@efd-inc.com fax or
3 Ultra air-powered fluid dispensers Ultra dispensers are shipped complete with all necessary hardware for production. A wide variety of dispensing component options is included with the dispenser. Your EFD Fluid Application Specialist will recommend specific components for your application. The Ultra 1400 and 870 Series dispensers are covered by our Two Year Limited Warranty (requires clean, dry, filtered plant air). Ultra 1400 Series Features precise digital timer plus analog air and vacuum control. Dispensing kit includes Ultra 1400, cabinet-mounted syringe barrel holder, wire adapter hose holder, foot pedal, power cord, input air hose and fitting, User s Guide, (1) box of tip caps, (2) boxes of customer-selected Ultra syringe barrel/piston sets, (2) boxes of customer-selected dispense tips, and (1) adapter assembly $ All fluids; psi (0 to 6.9 bar) air pressure regulator $ Thin fluids; 0-15 psi (0 to 1.0 bar) air pressure regulator Ultra 870 Series All pneumatic with analog air and vacuum control. Dispensing kit includes Ultra 870, cabinet-mounted syringe barrel holder, wire adapter hose holder, foot pedal, input air hose and fitting, User s Guide, (1) box of tip caps, (2) boxes of customer-selected Ultra syringe barrel/piston sets, (2) boxes of customerselected dispense tips, and (1) adapter assembly $ All fluids; psi (0 to 6.9 bar) air pressure regulator Filter regulator Proper operation of dispenser requires clean, dry, filtered plant air. Order if your air supply is not filtered. See page 14 for details. Ultra 850D All pneumatic, wall-mounted. Dispenser includes foot pedal/air switch, mounting bracket, and introductory supply of Ultra dispensing components. 850D...$ All fluids; psi (0 to 6.9 bar) air pressure regulator 2000F755...$ Five-micron filter regulator 2000F756...$ Regulator with coalescing filter 2000F $ Filter element replacement kit Ultra positive displacement dispensers Ultra 2800 Dispensing System Ultra 2800 Dispensing System uses patented, positive displacement technology to consistently deliver a metered shot. System is all electric; compressed air is not required. Dispensing kit includes Ultra 2800, cabinet-mounted syringe barrel holder, cable guide, foot pedal, power cord, User s Guide, Quick Start Guide, (2) boxes of tip caps, (2) boxes of Ultra syringe barrel/ piston sets, and (2) boxes of customer-selected dispense tips (Specify syringe barrel size)...$ 3, (3cc) (5cc) (10cc) (30cc) 3
4 Hand-lever dispense valves Ultra hand-lever dispense valve systems are shipped complete with all necessary hardware for production. Systems include (1) lever-actuated dispense valve,1.0 liter or 5.0 liter tank reservoir with pressure regulator (1 to 60 psi), all fittings, 10-ft fluid feed tube, disposable plastic tank liner, valve stand, (30) various types and sizes of dispense tips, and operating manual. Hand-lever dispense valve systems 752SYS-1 system...$ 1, For applying cyanoacrylates, anaerobics, paints, white glues and other low to medium viscosity fluids. Wetted valve parts are UHMW polyethylene. Designed to accept one pound bottles of cyanoacrylates, anaerobics and other low viscosity fluids. Supplied with a 1.0 liter tank. 752SYS-4 system...$ 1, Identical to the 752SYS-1 except supplied with a 5.0 liter pressure tank. 752V-HL valve only...$ SYS-1 system...$ 1, For applying grease and sealants at fluid pressures between 100 psi and 300 psi. Wetted valve parts are Teflon, stainless steel and hard-coated aluminum. Note: For fluid pressures over 200 psi, contact your pump supplier for appropriate fluid inlet fitting and fluid feed tubing. 740V-HL valve only...$ HL valve only...$ For applying wood glues, braze pastes and silicones. Wetted valve parts are UHMW polyethylene and hard-coated aluminum. Includes #7543BP fluid inlet fitting, (2) 5180 nozzles, #2186BP tip adapter and (6) 5114TT tapered tips. Order tank and tubing separately. Replacement fluid feed tubing 2025 Clear PE tubing 1/8" ID x 1/4" OD...$ 3.26/ft. 2025UV Black PE tubing 1/8" ID x 1/4" OD /ft Clear Teflon FEP 3/16" ID x 1/4" OD /ft. 2315UV Black PE tubing 1/4" ID x 3/8" OD /ft Clear PE tubing 1/4" ID x 3/8" OD /ft. Replacement fluid inlet fittings 7543BP 1/8 NPT x 1/4 compression elbow polypropylene...$ BP 1/8 NPT x 3/8 compression polypropylene /8 NPT x 3/8 compression elbow brass Replacement tip adapters 2186 Polypro tip adapter for 725-HL...$ Tip adapter for 740V-HL NP Natural polypro tip adapter for 752V-HL BP Black polypro tip adapter for 752V-HL Filter regulator Proper operation of dispenser requires clean, dry, filtered plant air. Order if your air supply is not filtered. See page 14 for details. 2000F755...$ Five-micron filter regulator 2000F756...$ Regulator with coalescing filter 2000F $ Filter element replacement kit Hand-lever valve stand For 752V-HL and 740V-HL hand-lever valves...$ Disposable polypropylene nozzles Plastic nozzles with 1/4 NPT to fit 725-HL valves. Nozzles may be cut as required. Supplied (10) nozzles per package B 2 1/2" long x 1/8" opening $ 9.88 $ B 2 1/2" long x 1/16" opening Metal nozzles 1 1/2" long metal nozzles with 1/4 NPT to fit 725-HL valves. part # gauge ID each /4NPT 7.150" $ /4NPT 8.135" /4NPT " /4NPT " /4NPT " /4NPT "
5 Portable hand dispensers DispensGun Rugged, all-metal DispensGun makes easy, controlled applications of difficult-to-apply fluids. Complete flow control and positive shutoff mean no oozing or dripping. Adjustable grip for smaller hands. DispensGun (Specify syringe barrel size.)...$ DG3 (3cc); DG5 (5cc); DG10 (10cc); DG30 (30cc); DG55 (55cc) DispensGun R 2 1 DispensGun accessories Stand Convenient way to hold or store the DispensGun. Made of heavy gauge wire. PDSTAND...$ Molded field carrying case protects the DispensGun. PDCASE...$ Molded field carrying case DispensGun stand Illuminator Rugged flashlight attachment. Batteries included. PDLIGHT...$ Illuminator R 2 1 HPD hand plunger Use at workbenches, for field repair kits and for assemblies. Replaces fatiguing, inefficient hypodermic syringes that drip, and messy squeeze bottles. Reusable HandPlunger (Specify syringe barrel size.) HPD3K (3cc); HPD10K (10cc); HPD30K (30cc)...$ (1-9) (10-24) 8.67 (25+) HPD5 (5cc)...$ (1-4) (5-9) (10+) HandPlunger Note: Order components separately. To place an order or for application assistance, call or customersupport@efd-inc.com Shipments are made within 24 hours of receipt of order. 5
6 Industrial grade syringe barrels Ultra System syringe barrels and pistons Each box contains the same quantity of barrels and white PE pistons. Dust-free packaging. Select by required barrel style clear, light-block amber or opaque black. Clear barrels Clear barrels Barrel/piston Size White pistons Red pistons* Sets per box cc 5109CP-B 5109CPD-B 50 $ $ $ $ cc 5110CP-B 5110CPD-B cc 5111CP-B 5111CPD-B cc 5112CP-B 5112CPD-B cc 5113CP-B n/a FO CE R R I N T IFI madeby in ED USE RIA the U.S.A. D U S T L * Red pistons for use with Ultra 2800 dispensers only. Note: Translucent amber for UV- and light-sensitive material block 240 to 550 nm. Light block Light block Opaque Barrel/piston amber barrels amber barrels black barrels Sets Size White pistons Red pistons* White pistons per box cc 5109LBP-B 5109LBPD-B 5109UP-B 50 $ $ $ $ cc 5110LBP-B 5110LBPD-B 5110UP-B cc 5111LBP-B 5111LBPD-B 5111UP-B cc 5112LBP-B 5112LBPD-B 5112UP-B cc 5113LBP-B n/a 5113UP-B For cyanoacrylate and very low viscosity fluid applications. Each box contains the same quantity of clear syringe barrels, blue LV Barrier pistons and tip caps. Clear barrels Size Blue LV barrier Sets per box cc 5109LV-B 50 $ $ $ $ cc 5111LV-B A B 3cc 7/16" 2 7/8" 5cc 9/16" 2 11/16" 10cc 3/4" 3 1/2" 30cc 1" 4 9/16" 55cc 1" 6 13/16" A B Syringe barrels without pistons (order pistons separately) Size Clear barrels Qty/ box cc 5109LL-B 50 $ $ $ $ cc 5110LL-B cc 5111LL-B cc 5112LL-B cc 5113LL-B Light block Opaque Size amber barrels black barrels Qty/box cc 5109LB-B 5109UV-B 50 $ $ $ $ cc 5110LB-B 5110UV-B cc 5111LB-B 5111UV-B cc 5112LB-B 5112UV-B cc 5113LB-B 5113UV-B Note: 30cc and 55cc syringe barrels accept the same size barrel pistons, end caps and adapters. 6 ESD-safe syringe barrels Industrial grade, polypropylene syringe barrels, molded silicone-free and produced ESD-safe. These barrels exhibit high conductivity with relatively low loading of carbon black. Static decay rate <0.08 seconds. Surface resistivity <1x10 11 ohms/sq. Size Black Barrels per box cc 5109SD-B 50 $ $ $ $ cc 5111SD-B Note: Standard EFD SmoothFlow pistons are acceptable for use with static dissipative syringe barrels. Order separately.
7 Syringe barrel pistons LV Barrier piston Fittings for adapter assemblies For cyanoacrylates and very low viscosity fluid applications. SnapLok barrel adapter assemblies Adapter assemblies Molded one-piece, acetal adapter head with Buna-N O-ring, flexible polyurethane air hose (3/32" ID x 5/32" OD), male quick-connect and safety clip. 3-ft. hose Size 3-ft. hose 6-ft. hose w/filter trap 3cc 1000Y Y Y5148-F 5cc 1000Y Y Y5149-F 10cc 1000Y Y Y5150-F 30cc, 55cc 1000Y Y Y5152-F price each $ $ $ Replacement adapter head O-rings - (10) O-rings per bag Size Buna-N Viton EPR 3cc 5148R-B... $ RV-B... $ RE-B...$ cc 5149R-B RV-B RE-B cc 5150R-B RV-B RE-B cc, 55cc 5152R-B RV-B RE-B Note: Buna-N is standard for most fluids. Specify Viton or EPR for solvents and reactive fluids. 1000FLT-Y Liquid filter trap (for 3/32" ID hose)...$ MTC Adapter hose safety clip Male quick-connect (for 3/32" ID hose) L Flexible polyurethane tubing (3/32" ID x 5/32" OD) /ft. Size Blue LV Qty/box cc 5109LVP-B 50 $ $ $ $ cc 5111LVP-B Snap-tight barrel storage end caps Unique snap-on design for leakproof barrel sealing. ESD-safe syringe barrel adapter assemblies Molded one-piece, acetal adapter head with Buna-N O-ring, flexible 5/32" OD hose, male quick-connect and ground strap. 3-ft. hose length. Color: black. Size ESD-safe adapter assembly 3cc 1000SD cc 1000SD5150 price each $ Adapter heads Acetal with Buna-N O-rings Size Adapter heads 3cc 5148Y 5cc 5149Y 10cc 5150Y 30cc, 55cc 5152Y price each $ Size End cap Qty/box cc 5109EC-B 50 $ 9.73 $ 8.93 $ 8.53 $ cc 5110EC-B cc 5111EC-B cc, 55cc 5112EC-B Neoprene pistons Size Black Qty/box cc 5109S-B 50 $ $ $ $ cc 5110S-B cc 5111S-B cc, 55cc 5112S-B SafetyLok syringe barrel tip caps Seals syringe barrel output for storage. One size fits all. Tip cap Qty/box B 50 $ 7.37 $ 6.41 $ 5.46 $ 4.69 SmoothFlow polyethylene pistons Size White PE Orange SPE Red PD Qty/box cc 5109PE-B 5109SPE-B 5109PDP-B 50 $ $ 9.38 $ 8.78 $ cc 5110PE-B 5110SPE-B 5110PDP-B cc 5111PE-B 5111SPE-B 5111PDP-B cc, 55cc 5112PE-B 5112SPE-B 5112PDP-B White PE Orange SPE Red PD For application assistance or to place an order, call
8 SafetyLok precision dispensing tips CE R T IFI madeby ED USE EFD dispensing tips incorporate the unique SafetyLok color-coded polypropylene hubs. All tips are manufactured silicone-free and are packaged in transparent boxes for easy part identification. FO R I N in RIA the U.S.A. D U S T L Smooth-flow tapered tips - (50) tips per box For thick fluids. Molded polyethylene with UV block. Gauge ID Tapered Rigid tapered Color " 5114TT-B 5114RTT-B Olive " 5116TT-B 5116RTT-B Grey " 5118TT-B 5118RTT-B Green " 5120TT-B 5120RTT-B Pink " 5122TT-B 5122RTT-B Blue " 5125TT-B 5125RTT-B Red tapered 1-9 $ Precision, passivated stainless steel, burr-free tips - (50) tips per box Free lengths: 0.25" and 0.5" Gauge ID 0.25" length 0.5" length Hub color " B 5114-B Olive " B 5115-B Amber " B 5118-B Green " B 5120-B Pink " B 5121-B Purple " B 5122-B Blue " B 5123-B Orange " B 5125-B Red " B 5127-B Clear " B 5130-B Lavender 0.25" length and 0.5" length 1-9 $ Free lengths: 1" and 1.5" Gauge ID 1" length 1.5" length Hub color " B B Olive " B B Amber " B B Green " B B Pink " B B Purple " B B Blue " B B Orange " B B Red 1" length 1-9 $ " length 1-9 $ Pre-bent 45 and " length 0.5" length 1.5" length Gauge ID 45 angle 90 angle 45 angle Hub color " 5114-B B B Olive " 5115-B B Amber " 5118-B B B Green " 5120-B B Pink " 5121-B B B Purple " 5122-B B Blue " 5123-B B Orange " 5125-B B Red " 5127-B B Clear " 5130-B B Lavender 0.5" length; 45 & $ " length; $ To place an order or for application assistance, call customersupport@efd-inc.com
9 Flexible polypropylene tips (50) tips per box Free lengths: 0.5" and 1.5" Gauge ID 0.5" length 1.5" length Hub color " 5115PPS-B 5115PP-B Amber " 5118PPS-B 5118PP-B Green " 5120PPS-B 5120PP-B Pink " 5125PPS-B 5125PP-B Red 0.5" length 1-9 $ Microdot tips - (50) tips per box Fine gauge, passivated stainless steel, burr-free tips for critical microdot applications. Molded polypropylene hub with UV block. ID.004" (0.09 mm). Gauge 0.25" length Hub color B Yellow Oval tips - (50) tips per box For flat ribbon deposits of thick fluids. 0.5" length. Outlet size is.078 x.016" (1.98 x 0.41 mm). Gauge Oval Hub color OVAL-B Amber Brush tips - sold individually For greases and glues. 2" long with nylon bristles. style standard high flow Soft bristle 5140A 5140HF Stiff bristle 5141A 5141HF price each $ 8.06 Tip installation tool 1.5" length 1-9 $ Tip shields - (10) shields per box For light-sensitive and UV-cure adhesives. Fits over dispensing tip hub. Size Shield Color 3cc 5105 red 5cc to 55cc 5106 black $ $ $ T Tip installation tool (each)...$ PTFE-lined tips - (50) tips per box For cyanoacrylate adhesives. Crimped. 0.5" and 1" length. ID 0.5" Lined 1" Lined Hub color.020" 5121TLCS-B 5121TLC-B Grey.006" 5125TLCS-B 5125TLC-B Pink PTFE-coated tips - (20) tips per box For optical media applications. 0.5 length. Packaged with individual tip covers. Gauge ID 0.5" length Hub color PC-B Purple PC-B Orange Chamfered tips - (50) tips per box Precision, burr-free, passivated stainless steel tips for easy positioning between delicate surfaces. 0.5" length. Gauge Chamfered Hub color CH-B Green CH-B Orange CH-B Red 33* 5133MD-B Clear ESD-safe dispensing tips ESD-safe, smooth-flow polyethylene tapered tips, molded silicone-free. (50) tips per box. Gauge ID Tapered Color " 5118SDTT-B Black " 5120SDTT-B Black " 5125SDTT-B Black ESD-safe, burr-free, passivated stainless steel chamfered tips, molded silicone-free. 0.25" length. (25) tips per box. Gauge ID Chamfered Hub color " 5133CH-B Black ESD-safe, burr-free, passivated stainless steel blunt-end tips, molded silicone-free. 0.25" length. (50) tips per box. Gauge ID Blunt-end Hub color " 5130SD.25-B Black 0.5" PTFE-lined 1-9 $ " PTFE-lined 1-9 $ " PTFE-coated 1-9 $ , 23, 25 gauge 1-9 $ *33 gauge is 0.25 long. 1-9 $ ESD-safe tapered 1-9 $ ESD-safe chamfered 1-9 $ ESD-safe blunt-end 1-9 $
10 Cartridge reservoir systems 5195G Retainer cap gasket 2310 Connecting hose 5195R Retainer cap 5196 Plunger Complete cartridge reservoir assembly Complete cartridge systems include 5 ft. connecting hose, retainer cap, cap gasket, retainer, cartridge, tip adapter, end cap, outlet cap and plunger oz cartridge reservoir system...$ oz cartridge reservoir system oz cartridge reservoir system Disposable cartridge reservoirs C 2.5 oz molded polyethylene cartridge reservoir $ 1.14 $ 0.94 $ C 6 oz molded polyethylene cartridge reservoir C 12 oz molded polyethylene cartridge reservoir Polyethylene cartridge plunger, one size fits all Replacement parts and accessories Dimensions A B 1.58" 3.87" 1.58" 6.93" 1.58" 12.20" B Retainer A Reservoir 5190R 2.5 oz cartridge retainer...$ R 6 oz cartridge retainer R 12 oz cartridge retainer R Cartridge retainer cap (fits all sizes) G Cartridge retainer cap gasket, EPR Cartridge tip adapter B Cartridge tip adapter, nickel-plated brass ft. connecting hose S 10 ft. connecting hose and air shut off valve CH 8 ft. coiled connecting hose CC End cap (fits all sizes) CP Outlet cap (fits all sizes) X Cartridge stand D/700P Cartridge block and pistol grip/switch X 900D/700P 1/10 gallon cartridge assembly for caulking tubes Complete system to accept caulking type cartridge includes 5 ft. connecting hose, retainer cap, retainer, tip and nozzle adapters SYS 1/10 gallon caulking cartridge assembly... $ E Cartridge stand for 1/10 gallon assembly /10 gallon cartridge assembly 2186 Tip adapter Disposable nozzles - (10) nozzles per bag B Polypropylene nozzle 2.5" x.125" $ 9.88 $ B Polypropylene nozzle 2.5" x.062" B Polypropylene nozzle 4.0" x.062" B Polypropylene nozzle 4.0" x.031" To place an order or for application assistance, call Shipments are made within 24 hours of receipt of order. 10
11 Start Stop Power Stop Fill Start Fill Cylinder Pressure POSITION BAND ABOVE LINE 55cc 30cc 10cc cc 3cc Fluid Pressure Syringe barrel loaders 8000BF Automated filling station For fast volumetric filling, the automated 8000BF system makes it easy, accurate and cleaner to fill syringe barrels. System ships complete with microprocessor controller, five-micron filter regulator, fittings, and foot pedal. Accommodates 3cc to 55cc syringes. 8000BF-HPA: High-pressure...$ 4, For use with high pressure (up to 2500 psi) fluid lines 8000BF-HF: High-flow...4, For use with cartridge and tank reservoirs at pressures up to 100 psi (6.9 bar) 8000BF-PW: positive wedge...4, For use with reactive fluids that require disposable fluid path, up to 80 psi (5.5 bar) 8000BF-PW 920 Series syringe barrel loader Each syringe barrel loader comes complete with psi regulator and gauge, retainer and cap assembly with toggle switch, fittings, stand, cartridge with plunger and 5cc, 10cc and 30/55cc size syringe barrel fill level plugs. 922BL: 2.5 oz. cartridge...$ BL: 6 oz. cartridge Barrel Fill Station 920BL: 12 oz. cartridge : cartridge-to-barrel fitting, stainless steel P: cartridge-to-barrel fitting, polypropylene DBL-CAP: material feed tip cap BL 940 Series syringe barrel loader Syringe barrel loader comes complete with 0-60 psi regulator and gauge, retainer and cap assembly with toggle switch, fittings, stand and 5cc, 10cc and 30/55cc size syringe barrel fill level plugs. 940BL: 1/10 gallon caulking tubes...$ : nozzle-to-barrel adapter fitting, stainless steel BL Accessories 5101: funnel...$ B: loading spatula, acetal - (5) per bag BR: storage rack holds (72) 3cc to 5cc syringe barrels BR: storage rack holds (24) 10cc, 30cc and 55cc syringe barrels : luer-to-luer transfer fitting, polypropylene : luer-to-luer transfer fitting, nickel-plated brass Syringe barrel storage rack Luer-to-luer transfer fitting 11
12 Productivity tools and accessories Flex arm syringe barrel holder Mounts to dispenser cabinet; can be adjusted to multiple positions. For Ultra 2400, 1400 and 870 Series dispensers Flexible arm syringe barrel holder... $ Stiff arm syringe barrel holder Mounts to Ultra dispenser cabinet and holds barrel in a fixed position. For Ultra 2400, 1400 and 870 Series dispensers Stiff arm syringe barrel holder... $ FS 2441 Ergonomic hand grip with finger switch/light Trigger the dispense cycle from this grip with built-in touch sensor and high beam penlight. Fits all EFD syringe barrels. For Ultra 2400 Series dispensers. Finger switch patent# U.S. 6,938,795 B FS Ergonomic hand grip with finger switch/light... $ Hand grip only without finger switch (for all dispensers)... $ FS Finger switch Low voltage, push button finger switch controls dispense cycle. Fits all EFD syringe barrels. For Ultra 1400 Series dispensers. 2015FS Finger switch... $ B Replacement syringe barrel holder sleeve 2427-B Barrel holder sleeves (5 pack)...$12.47 Syringe barrel production stand 2856 Stand for Ultra 2800 Series dispensers... $ A Stand for other Ultra dispensers... $ A
13 Workstation lamp Mounts on flex arm and provides targeted lighting on work area. For Ultra 2400 Series dispensers Workstation lamp... $ B Replacement bulb... $ Safety shield Provides splash-guard protection when dispensing toxic fluids. For Ultra 2400 and 2800 Series dispensers Safety shield... $ AM Accessory mount (1 required for use with Ultra 2800)... $ Production extension shelf Provides flat work surface for other tools or dispenser stacking. For Ultra 2400 Series dispensers Production extension shelf... $ Magnifying lens 1.7x magnification mounts on flex arm; perfect for assembly of small parts. For Ultra 2400 and 2800 Series dispenser Magnifying lens... $ AM Accessory mount (1 required for use with Ultra 2800)... $ I/O connector assembly Allows easy connection to dispenser for external control pin for Ultra 2400 and 2800 Series dispensers... $ pin for Ultra 1400 Series dispensers... $ Liquid filter trap Prevent fluid from being sucked back into the dispenser For Ultra 2400 Series dispenser... $ FLT-Y For Ultra 1400 and 870 Series dispensers... $ FLT-Y To place an order or for application assistance, call Shipments are made within 24 hours of receipt of order. Accessories list continued on next page. 13
14 Productivity tools and accessories 2400FT Cleanroom filter muffler Filters output air to meet Fed 209-B (0.5 micron particulates). 2400FT For Ultra 2400 Series dispensers... $ FT For Ultra 1400 and 870 Series dispensers... $ Dispensing tip sampler kit Includes a selection of various types and styles of dispensing tips, SmoothFlow pistons, tip and end caps - (140) pieces Dispensing tip kit... $ Vacuum pickup pen system All-in-one vacuum generator and pen system for picking up and placing small parts. For use with any air-powered dispenser Vacuum pickup pen system...$ VAC Vacuum generator with pickup pen Electric foot pedal provides a steady hand for pick-and-place function. 10VAC Vacuum generator with pickup pen... $ VACTweezer Vacuum pickup tool Useful, low cost pick-and-place tool with Staticide treated kit. Includes (7) tips, (5) pad sizes. VACTweezer Vacuum pickup tool...$ (1-9) $ (10+) 2000F F756 Proper operation of Ultra fluid dispensers and hand-lever valve systems requires dry, clean, filtered factory air. Order if your air supply is not filtered. Five micron filter regulator Provides proper air filtering for all dispensers. Order if you do not have a clean, dry, filtered factory air supply. 2000F755 Five-micron filter regulator...$ Five micron filter regulator with coalescing filter Recommended for systems dispensing cyanoacrylates. Removes liquid aerosols from air supply. 2000F756 Five-micron filter regulator with coalescing filter...$ FLT Coalescing filter assembly only...$ F755-2 Filter element replacement kit...$
15 + + + Special-purpose dispensing systems HPx series high-pressure dispensing system For use with air-powered dispensers. Apply medical adhesives, thick RTV, and epoxies through small gauge tips. Use with Ultra disposable components. HP7x...$ Produces up to 700 psi in an EFD 3cc syringe barrel when connected to a standard 100 psi dispenser. Order EFD 3cc Ultra syringe barrel/piston sets and dispense tips separately. HP4x...$ Produces up to 400 psi in an EFD 10cc syringe barrel when connected to a standard 100 psi dispenser. Order EFD 10cc Ultra syringe barrel/piston sets and dispense tips separately. connect to air-powered dispenser Mikros pen system 5800MP-SYS...$ For use with air-powered dispensers. Unique, lightweight pen with 0.25cc disposable fluid reservoir tips. Complete system includes (1) Mikros pen; (5) each of three sizes of reservoir tips 30, 32, and 33 gauge; (5) loading tubes; (1) piston installation tool and user's guide. 5800MP...$ For use with air-powered dispensers. Unique, lightweight pen used with 0.25cc disposable reservoir tips. Mikros pen and user's guide included. Order reservoir tips separately. fluid reservoir tip connect to air-powered dispenser + Mikros 0.25cc fluid reservoir tips Polypropylene reservoirs with burr-free, passivated stainless steel chamfered tips. Molded silicone-free with UV-blocking agent. Packaged with tip protectors. (25) tips and pistons per box. Gauge ID Chamfered Hub color " 5830CH-B lavender " 5833CH-B grey Polypropylene reservoirs with burr-free, passivated stainless steel blunt-end tips. Molded silicone-free with UV-blocking agent. Packaged with tip protectors. (25) tips and pistons per box. Gauge ID Blunt-end Hub color " 5832-B yellow chamfered reservoir tips 1-9 $ blunt-end reservoir tips 1-9 $ Loading tubes. Clear polymer fill tubes; 1.5" long; (50) tubes per bag B...$ Piston installation tool. Used to easily insert piston into 0.25cc reservoir tip. Acetal. Sold individually $ 9.30 Neoprene finger grip. Sold individually $ 4.32 Mikros pen replacement O-rings. (10) O-rings per bag B Air seal O-ring; Buna-N...$ V-B Air seal O-ring; Viton B Dampening O-ring; Buna-N Every 0.25cc fluid reservoir tip is shipped with tip protector and piston. To place an order or for application assistance, call
16 More EFD products Precision Dispense Valves Engineered for the most demanding mechanical and environmental applications, EFD low-maintenance dispense valve systems provide very reliable dispensing solutions for benchtop applications, machine builders, and a very cost-effective, drop-in retrofit alternative for machine operators info@efd-inc.com MicroCoat Lubrication System EFD s MicroCoat precision LVLP lubrication system was specifically developed for the metal stamping industry. The MicroCoat system applies the exact amount in a fine, even film. Tools last longer and presses run faster microcoat@efd-inc.com UltraTT XYZ System EFD s Ultra TT xyz dispensing systems increase productivity by combining precise assembly fluid application with fast, accurate automated positioning. Easily programmed with a PDA handheld automation@efd-inc.com SolderPlus Switching from flux-cored wired to SolderPlus provides better quality solder joints with reduced costs. SolderPlus dispensed with air-powered dispensing systems delivers precise, repeatable deposits at high speeds without waste solder@efd-inc.com For application assistance or to place an order, call Fax: customersupport@efd-inc.com All major credit cards accepted. Shipments are made within 24 hours of receipt of order. A NORDSON COMPANY For EFD sales and service in over 30 countries, contact EFD USA or go to EFD, Ultra System, Mikros, HP7x, SmoothFlow, LV Barrier, SnapLok, SafetyLok, DispenStand, SolderPlus and VACTweezer are trademarks of EFD, Inc. Teflon and Viton are registered trademarks of DuPont. All prices are listed in US dollars and are subject to change without notice. Specifications are subject to change without notice EFD, Inc. v P1005 EFD Inc., a Nordson Company 977 Waterman Avenue East Providence, RI USA telephone fax info@efd-inc.com
Operating Guide 1000 Series Dispensers
Operating Guide 1000 Series Dispensers 1000XL 1000D A NORDSON COMPANY In the US: 800-556-3484 In the UK: 0800 585733 In Mexico: 001-800-556-3484 Introduction The 1000 Series dispensers provide years of
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationSuitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip. Timing interval from 0.01 to 31 seconds.
JB1113N Pneumatic General Purpose Dispenser Dispensers A popular analog dispenser series featuring dual 110/220V operation. An all-purpose dispenser, versatile and easy to use in a few simple steps hook
More informationREPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
More informationReplacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
More informationBulk Storage the OIL SAFE Way. Three System Types. Establish Best Practice
Bulk Storage the OIL SAFE Way OIL SAFE Bulk Systems are the most feature rich and highest quality lubricant storage and dispensing systems available. Fully Modular and ships ASSEMBLED Three System Types
More informationScotch-Weld PUR Easy 250 Adhesive Applicator
Scotch-Weld September, 2014 Product Description PUR Easy 250 Applicator is a self contained pneumatic applicator designed to dispense 1/10 th gallon(300ml) cartridges of 3M PUR adhesives. PURs are a family
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More informationthe equipment sourcebook volume 6
the equipment sourcebook 2007 volume 6 INTRODUCTION The Equipment Sourcebook Since 97, Henkel Corporation has designed, built, and integrated high quality equipment solutions. From simple hand held devices
More informationLubricant Transfer, Storage & Dispensing
Lubricant Transfer, Storage & Dispensing WHY USE OIL SAFE TRANSFER CONTAINERS? OIL SAFE - TRANSFER CONTAINERS For more than a decade, OIL SAFE has been the oil transfer manage- The color-coded range of
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
More informationELECTRIC PERISTALTIC MORTAR POINTING PUMP
ELECTRIC PERISTALTIC MORTAR POINTING PUMP pointing gun & control valve ACF405 PERISTALTIC PuMP hopper feed roller & tube pump for refurbishment & repair trades heritage & conservation bridge & underground
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationROUGHNECK II Pumpless Drain
SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationthe equipment sourcebook 2008-2009 volume 7
the equipment sourcebook 2008-2009 volume 7 INTRODUCTION The Equipment Sourcebook Since 97, Henkel Corporation has designed, built, and integrated high quality equipment solutions. From simple hand held
More informationThe Equipment Sourcebook 2014 VOLUME 10
The Equipment Sourcebook 2014 VOLUME 10 The Equipment Sourcebook Since 1971, Henkel Corporation has designed, built and integrated high-quality equipment solutions. From simple handheld devices to fully
More informationOPL BASIC. Dosing System for Professional Laundry machines. Contents
OPL BASIC Dosing System for Professional Laundry machines Contents 1 Getting Started. Page 2 2 Installation. Page 4 3 Set Up & Operation. Page 8 4 Maintenance & Accessories. Page 10 5 Troubleshooting Page
More informationCutMaster 102. 6.04 Major External Replacement Parts
CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #
More informationNordson EFD Solutions: Fluid Positioning & Precision Dispensing in Mobile Device and Wearables Manufacturing
Nordson EFD Solutions: Fluid Positioning & Precision Dispensing in Mobile Device and Wearables Manufacturing Introduction As consumers demand thinner, lighter, more sophisticated and durable mobile devices
More informationSystem Accessories Pricing. Page 0 Effective 7/02
System Accessories Pricing Page 0 Effective 7/02 Firetrace Tubing 200005 Firetrace Detection Tubing (FDT) (Per Foot) (Available in continuous lengths up to 333 ft.) Accessories 400001 400004 400061 400060
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationTools. Acid Brushes. Utility Brushes. Brushes For Cleaning Copper Fittings. Brushes For Cleaning Copper Tubing G113 10/06/11
10/06/11 Acid Brushes G113 Manufactured with electrolyte tin plate and filled with 100% pure stiff black horse hair which is firmly crimped to eliminate bristle "fall out" Use with acid, flux and pipe
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationCutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationSciTech, sro Praha Ceník Jour Research tisk 3.1.2000
Ceny bez DPH, balného a poštovného. Jour Research pricelist 08/99 Part Number Description cena CZK 0001-0737 Wash-Pro Upgrade Kit 7098,00 0001-5530 Gas Flow Meter 22932,00 0001-5531 Silicon Connection
More informationHYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
More informationAIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
More informationPP / PE X X X X (X) X PA (X) X
1. Caution! During dispensing from cartridges and syringes, pressure will build up in the tubes. With incorrect handling, this can lead, in the worst case, to bursting of the cartridge or syringe. When
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationSection #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.
Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationWHOLESALE DIRECT INC. 5620 WEST 65TH STREET
Auto Pump V 200 100 0 100 Max Rating Vehicle mount compressor ensures truck air brake system is properly pressurized for immediate dispatch from station Pressure switch regulated operation automatically
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More information20 GALLON WET DRY VACUUM
20 Gallon Wet & Dry Vacuum 110" Water Lift Vac Motor 24" Front Mount Squeegee Assembly 50' Cord Special Tip Pour Feature Warranty Contractor Tool Kit Includes: Wet p/u Tool, Dry p/u Tool, Crevice Tool,
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationrainbowsystem.com Rexair LLC Troy, Michigan 2011 Rexair LLC R14388A-0 Printed in U.S.A.
rainbowsystem.com Rexair LLC Troy, Michigan 2011 Rexair LLC R14388A-0 Printed in U.S.A. customer care number As part of Rexair s Customer Care program, each AquaMate receives a Customer Care serial number
More information7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
More informationKNC Model 3666 Automatic Pressure Calibration System
KNC Model 3666 Automatic Pressure Calibration System Product Description The Model 3666 Automatic Pressure Calibration (APC) System by King Nutronics Corporation is a portable secondary standards laboratory
More informationINSPECTION, MAINTENANCE AND RECHARGE SERVICE MANUAL P/N 16303
WATER MIST HAND PORTABLE FIRE EXTINGUISHERS Model B270 ¾ Gallon Model B272 2 ½ Gallon INSPECTION, MAINTENANCE AND RECHARGE SERVICE MANUAL P/N 6303 All fire extinguishers should be installed, inspected
More informationTANKER & STORAGE TANK PRODUCTS
Flotech Overfill Detection Products Overfill detection for road tankers is a secondary emergency shut-off system used to prevent overfilling of tanker compartments during the terminal loading process.
More informationNational- Spencer Inc.
9-27-2010 National- Spencer Inc. 19.2V HEAVY DUTY GREASE GUN PRODUCT SPECIFICATION Charger Input Power 110 VAC Battery Output Power 19.2V Battery Capacity 1500 MAH Battery Pack Charge Time 1 Hour Maximum
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationModel 1210C Battery Powered Pump Shown. Description
12 Volt DC Rotary Vane Pump Series 1200C Model 1210C Battery Powered Pump Shown Description of Included Models Model Number FR1205C FR1210C FR1211C FR2410C FR2411C Description Basic 12 volt DC pump with
More informationCuring Lights HALOGEN CURING LIGHTS 5.2 L.E.D. CURING LIGHTS 5.3 LIGHT GUIDES 5.5 RADIOMETERS 5.6 ACCESSORIES FOR CURING LIGHTS 5.
Curing Lights 5 HALOGEN CURING LIGHTS 5.2 L.E.D. CURING LIGHTS 5.3 LIGHT GUIDES 5.5 RADIOMETERS 5.6 ACCESSORIES FOR CURING LIGHTS 5.6 Halogen Curing Lights Optilux 501 The most versatile and high power
More informationAutomated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
More information2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.
CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationVolkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 17 Engine-Lubrication system (Page GR-17)
17 Engine-Lubrication system (Page GR-17) Lubrication system components, removing and installing Oil pan, removing and installing Oil pressure and oil pressure switch, checking Dynamic oil pressure warning
More informationUNITOR VACUUM cleaners
UNITOR VACUUM cleaners Unitor VCD15 a compact, heavy-duty dry vacuum cleaner for accommodation areas The smallest unit in the Unitor range, the VCD15 is purpose-made for use on cruise and passenger vessels.
More informationHOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS
HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY
More information1998½-2007 Dodge Ram 5.9L Cummins
9 January 2014 1081130-33 Dodge Cummins Low Fuel Pressure Alarm Light Kit (I-00143) 1 1998½-2007 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester
More informationLine to Refrigerator Ice/Water Dispenser
Standard 18 Line to Refrigerator Ice/Water Dispenser Pump Module Bottled Water How The System Works The FLOJET Bottled Water Dispensing System was designed to pump water from a commercially available 5-gallon
More informationSection 8 Storage Tanks & Equipment
Section Storage Tanks & Equipment Table of Contents Section Storage Tanks & Equipment Above Ground Horizontal Tanks... -1-4 Containment Sumps...-5 Fillrite AC & Transfer Pumps... -9-10 Fillrite Diesel
More informationTUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1
Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationNITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
More informationG R O U P. ISO 9001:2008 Certified
If Your Fluid Storage Area Looks Like This... IFH Has a Better Solution. G R O U P Innovative Fluid Handling Group ISO 9001:2008 Certified Take the Innovative Approach: The IFH Fluid Storage and Dispensing
More information5-Other arc welding WELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...
More informationLED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
More informationAccessories. Fittings 2. Products assembly 4. Tube Spike 3/5 mm 8 T.N.L. 9. Vacuum Breaker 10. Line Flush Valve 11. Pressure Indicator 12
Accessories For irrigation systems Version 1.0 Fittings 2 Products assembly 4 Tube Spike 3/5 mm 8 T.N.L. 9 Vacuum Breaker 10 Line Flush Valve 11 Pressure Indicator 12 Fittings Manifold 8 outlets To distribute
More informationA SUPERIOR SOLUTION TO DRUM AND STEEL TANK USAGE
A SUPERIOR SOLUTION TO DRUM AND STEEL TANK USAGE The U.L.C. Listed C142.14-03 Cubet container provides a unique solution to storage and dispensing fluids. The Cubet s logical and integrated design allows
More informationOASIS-PLUS 120V READ ALL INSTRUCTIONS BEFORE OPERATING READ ALL INSTRUCTIONS BEFORE OPERATING OZONE IS A POWERFUL OXIDIZER AND MUST BE USED WITH CARE
OASIS-PLUS 120V INFORMATION & OPERATING INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE OPERATING READ ALL INSTRUCTIONS BEFORE OPERATING OZONE IS A POWERFUL OXIDIZER AND MUST BE USED WITH CARE 56041852 WARNING:
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationUsed Fluid Handling Portable Used-Oil Gravity Drains
Portable Used-Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationFull Technical Catalog For Closed-loop Sampling System
Full Technical Catalog For Closed-loop Sampling System Full Technical Catalog For Closed-loop Sampling System FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
More informationSelf Purging Liquid Trap (SPLT ) User s Manual
Self Purging Liquid Trap (SPLT ) User s Manual High pressure liquids and gases are potentially hazardous. Energy stored in these liquids and gases can be released unexpectedly and with extreme force. High
More informationProduct Data. Model 575 Series Submersible Level Transmitters ELECTRONIC PRESSURE MEASUREMENT PRODUCTS DESCRIPTION FEATURES APPLICATIONS
EPP - 1 DECRIPTION The odel 575 is used in general water/wastewater applications. The transmitter is offered in a standard non-clogging snub nose end, flush diaphragm or protected flush diaphragm with
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationTROPHY SERIES START WITH CONFIDENCE. FINISH WITH A TROPHY. Application Versatility Robust Design Ergonomics. Start with Confidence. End with a Trophy.
TROPHY SERIES Application Versatility Robust Design Ergonomics Start with Confidence. End with a Trophy. START WITH CONFIDENCE. FINISH WITH A TROPHY. Application Versatility and Consistent Championship
More informationPulseJetter Drain Cleaner
PulseJetter Drain Cleaner DRAIN LINE MAINTENANCE PJ-600 The PJ-600 Drain Cleaner is compact and rugged entry-level drain cleaner. It can be stored in a small utility closet and easily carried to the work
More informationCubetainer. The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments
Cubetainer The competition can t stack up to Snyder! Stackable Tanks, Stands and Containments Providing Bulk Storage Solutions for Motor Oil, Lubricants, Hydraulic Fluids, ATF, Antifreeze & DEF www.snydercubetainer.com
More informationOverseas orders under $500.00 are asked to pre-pay by credit card, or orders over $500.00 can be prepaid with a wire transfer.
For our complete line of tools and accessories, visit our online store at www.virtual-ii.com HOW TO ORDER By Telephone Our sales department is available from 7:00 AM to 5:00 PM (MST), Monday through Thursday
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More informationDelivers the BEST SPRAY FINISH available on the market today! MADE IN THE USA WITH GLOBAL COMPONENTS
& Delivers the BEST SPRAY FINISH available on the market today! MADE IN THE USA WITH GLOBAL COMPONENTS Graco Handheld Sprayers the Best Choice for Small TrueCoat II sprayers are the fastest and easiest
More informationSCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT
REV. 05-04- SCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT GENERAL Kit Numbers 95-08B, 9006-09B, 876-0A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories
More informationIndex by Product or Item Number
191 & ANZ023N01 LOCTITE Standard Nozzle Adapter/Check Valve/Jam Nut 18, 110 1C LOCTITE 1C Hysol Epoxy Adhesive 43 1X LOCTITE 1X Hysol Hot Melt Adhesive 14, 16 55 LOCTITE 55 Pipe Sealing Cord 148 101 LOCTITE
More information2700 DUST CONTROL MACHINE:
700 DUST CONTROL MACHINE: 30016 PAGE 1 700 DUST CONTROL MACHINE: 30016 11 17 9 15 8 16 10 1 13 7 6 1 1 30 OLD STYLE BATERY BOX 8 3 5 3 7 0 18 19 31 3 9 5 1 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
More informationTTC-IIS Series Up to 11 LPM Free Flow
66 Up to 11 LPM Free Flow Typical Applications Gas Analysis Anesthesia Monitors CO 2 Monitors Patient Monitoring Wound Therapy Urinalysis Trace Detection Medical/Training Mannequins Degassing Product Specifications
More informationGuide to Setting up a Lube Room
Guide to Setting up a Lube Room ForFluids.com Section 1 : Introduction When the inspector comes around, what do you want him to see? this Having a clean and safe work area helps operations. If an inspector
More informationCataLoG No. weight o.d. i.d. GLaSSwaRe
Lead weights with Vikem Vinyl Coating Protect and Stabilize Expensive Glassware Stabilizes vessels in water baths and on benchtops Added insurance against tipping and possible chemical spills Closed ring
More informationAFE424 SERVICE PARTS
This is the parts list for the AFE. When looking up part numbers, always check the complete model and serial numbers to be certain of ordering the correct parts. The Air Cooled model has also been manufactured
More informationModels SFP33 & SFP32 Pressure Transmitters
SFP33 Flow-Through Pressure Transmitter SFP32 Single-Ended Pressure Transmitter DS-PR-SFP-eng April, 2016 Data Sheet Models SFP33 & SFP32 Pressure Transmitters Pressure Brooks Seal Free Pressure Measurement
More informationCSD WATER REMOVAL FILTERS FOR DIESEL
CSD CSD WATER REMOVAL FILTERS FOR DIESEL Remove water to extend fuel injector life & increase combustion fuel efficiency Remove free water to saturation point with high single pass efficienc (achieve
More informationMaster Catalogue I August 2011
Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems 58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile
More informationTUTORIAL. REbUILdING. REAR CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-2
Part #: HT-2 1965-82 CORVETTE O-RING CONVERSION REAR CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette
More informationFMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters
FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters M-4270/0707, pg. 2 of 29 READ THIS MANUAL COMPLETELY BEFORE ATTEMPTING TO CONNECT OR OPERATE YOUR FLOW SENSOR. FAILURE TO DO SO MAY
More informationElectronic Wallmount Faucet 1500T4 & 1501T4 Series
Electronic Wallmount Faucet 1500T4 & 1501T4 Series Specification: (example) Battery (4 C cell) or Hardwire (24 VAC) infrared electronic handwash system H 2OPTICS technology no external adjustments required
More informationMEASURE AND CONTROL. Model 413 077 - Grease control gun Grease control gun with rigid stem and 3 jaw connector (1124). 1/4 NPTF inlet.
grease control guns non-metered Grease control handles Grease control guns Steel and aluminum high pressure control gun with ergonomic grip. Maximum working pressure: 7140 psi. Inlet thread: 1/4 NPTF,
More informationTABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)
CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.
More informationnot appearance. ADHESIVE SYSTEMS CORIAN As an integral part of its sheet and shape products, DuPont has developed a special adhesive.
CORIAN JOINT ADHESIVE SYSTEM 8.1 CORIAN JOINT ADHESIVE SYSTEM As an integral part of its sheet and shape products, DuPont has developed a special adhesive. The DuPont Corian covers seam performance, not
More information