Class of Term 7 - Spring 2015 Semester Course Instructor Course Civil Instructor Choose two electives from the following options: Civil OOGE
|
|
|
- Penelope Gordon
- 8 years ago
- Views:
Transcription
1 Course COMPLEMENTARY STUDIES Instructor 8151 Technology,Sustainable Society & International Development (Distance) TBA Course Civil Instructor 7704 Design of Steel Structures Adluri S 7713 Hydrology and Water Resources Snelgrove K Highway Engineering Dhar, A. Choose two electives from the following options: 6718 Environmental Geotechniques Zhang H Hydrotechnical Engineering Snelgrove K. **A student may take up to 2 OOGE option electives in a student s program. A student may take other technical courses with permission from the discipline chair. Civil OOGE 7704 Design of Steel Structures Adluri S 8691 Advanced Petroleum Production Eng. TBA U:\UGS Operations\Class Schedules\2015 Spring\Spring2015Schedule-MASTER - Term 7 Course List Page 1 of 5
2 Computer 7804 Computer Engineering Design Project I Czarnuch, S 7894 Concurrent Programming Slawneh, S Choose two electives from the following options: 7855 Communications Electronics TBA 7952 Robotics and Automation Sharan, A Introduction to LSI Design/ASIC Design Zhang L. Electrical 7803 Electrical Engineering Design Project I Khan, N. Choose three electives from the following options: 7844 Power System Analysis Jeyasurya, B Communications Electronics TBA 7856 Renewable Energy Systems Iqbal T Robotics and Automation Sharan, A. U:\UGS Operations\Class Schedules\2015 Spring\Spring2015Schedule-MASTER - Term 7 Course List Page 2 of 5
3 Electrical OOGE 7650 Offshore Oil and Gas Engineering Project I TBA Choose one OOGE Elective from the following options: 8691 Advanced Petroleum Production Eng. TBA Choose one elective from the following options: 7844 Power System Analysis Jeyasurya, B Renewable Energy Systems Iqbal T Robotics and Automation Sharan, A ** 7650 students will attend classes with 7803/7804. Contact the Department Head for further information if necessary. U:\UGS Operations\Class Schedules\2015 Spring\Spring2015Schedule-MASTER - Term 7 Course List Page 3 of 5
4 Mechanical 7926 Mechanical Project I Nakhla, S Instrumentation and Experimental Design De Silva, B 7953 Mechatronics II Mann, G. In addition to the three required course listed above, all students must register for two Technical Stream Courses. The recommended courses are as follows: Mechanics and Materials 7911 Industrial Materials Shirokoff, J Mechanical Components Design II Yang, J. 7934/7706 Finite Element Analysis Sharan, A. Mechatronics 7929 Mechanical Components Design II Yang, J Robotics & Automation Sharan. A Petroleum Technical Stream 8691 Advanced Petroleum Producation Engineering TBA Thermo Fluids 7901 Heat Transfer II Pope K Mechanical Equipment Pope K. U:\UGS Operations\Class Schedules\2015 Spring\Spring2015Schedule-MASTER - Term 7 Course List Page 4 of 5
5 ONAE 7000 Ocean Systems Design Walker D Ocean Engineering Materials Shirokoff, J Marine Hydrodynamics Peng H Seakeeping and Maneuvering of ocean Vehicles Qiu W Choose one elective from the following options: 7003 Small Craft Design Walker D. Or a technical Elective approved by the discipline chair Process 7621 Process Dynamics and Control Ahmed S Process Engineering Project I TBA 8677 Process Plant Design and Economics TBA In addition to the three required course listed above, all students must register for two Technical Stream Courses. The recommended courses are as follows: Petroleum Technical Stream Choose one electives from the following options: 8691 Advanced Petroleum Production Engineering TBA Process Technical Stream 7623 Process Simulation Ahmed, S. U:\UGS Operations\Class Schedules\2015 Spring\Spring2015Schedule-MASTER - Term 7 Course List Page 5 of 5
Subject Module. Department
POSTGRADUATE LEURE-TYPE MODULES PER DEPARTMENT CIVIL ENGINEERING 10785 812 15 Advanced Bitumen Technology R 3 777 CIVIL ENGINEERING 10809 711 15 Advanced geotechnics R 3 777 CIVIL ENGINEERING 10809 811
Proposal for Transition Programs in Electrical and Computer Engineering
Proposal for Transition Programs in Electrical and Computer Engineering Approved by Faculty Council 2007 November 28 and by the Senate Committee on Undergraduate Studies 2007 December 20 Introduction The
Welcome to The College of Engineering at Virginia Tech. Information Session
Welcome to The College of Engineering at Virginia Tech Information Session Virginia Tech Engineering Student Traits Creativity Plan to study Interest in Math and Science Teamwork Are You Ready? Challenging
Offshore Engineering - Master's Degree Programme, 5 years
Offshore Engineering - Master's Degree Programme, 5 years Credits: 300 credits Level: Master's degree (5 years) Offered by: Faculty of Science and Technology, Department of Mechanical and Structural Engineering
College of Engineering Mechanical Engineering Depart. rtment. Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies
Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies College of Engineering Mechanical Engineering Depart rtment Master of Science in Mechanical Engineering Mechanical
Release: 1. MEM80112 Graduate Diploma of Engineering
Release: 1 MEM80112 Graduate Diploma of Engineering MEM80112 Vocational Graduate Diploma of Engineering Modification History Release 1 This qualification supersedes MEM80111. Additional elective units
Offshore Engineering - Master's Degree Programme, 5 years
Offshore Engineering - Master's Degree Programme, 5 years Credits: 300 credits Level: Master's degree (5 years) Offered by: Faculty of Science and Technology, Department of Mechanical and Structural Engineering
MASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
MECHANICAL ENGINEERING
MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Program coordinator Mechanical Engineering 19/11/2015 1 CONTENT MASTER MECHANICAL ENGINEERING
Engineering Technology Division xxx
7 xxx The offers a wide range of programs. These programs prepare students to successfully move to challenging and critical positions requiring technical expertise in a modern and evolving world. Students
Department of Mechanical Engineering
About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs
How To Understand Engineering
ENGINEERING YOUR FUTURE Dr. Vlasov 1 Outline 1. Importance of Engineering 2. Major Engineering Disciplines 3. Engineering Functions 4. Engineering Majors 5. Statistical Overview Dr. Vlasov 2 Importance
Core Subjects (CS) Compulsory Subjects (CPS) Optional Subjects (OS)
UNDERGRADUATE DEGREE PROGRAMME IN MECHANICAL ENGINEERING School of Industrial Engineering, Albacete. Higher Technical School of Industrial Engineering, Ciudad Real and Polytechnic University School, Almadén
GRADUATE STUDIES RESEARCH. &Memorial University. Where people and ideas become.
GRADUATE STUDIES RESEARCH &Memorial University Where people and ideas become. Graduate Studies and Research Introduction 1 Newfoundland and Labrador and City of St. John s 2 Memorial University of Newfoundland
Complete course list. Taught
Complete course list Taught Course name Available awards Mode Advanced Materials MSc/PgDip/PgCert Full-time/Part-time Advanced Mechanical Engineering MSc Full-time/Part-time Advanced Motorsport Engineering
Engineering Disciplines
Engineering Overview The Field - Engineering Disciplines - Preparation - Accreditation - Day in the Life - Earnings - Employment - Career Path Forecast - Professional Organizations The Field Engineers
Questions and Answers. On the Mechanical Engineering program at SUNY Korea
Questions and Answers On the Mechanical Engineering program at SUNY Korea 1. What is mechanical engineering? (Prepared by the Mechanical Engineering department at SUNY Korea, Song-do, South Korea) March
Co-operative Education Degree Program (Engineering) Employer Handbook AN INSTITUE OF THE UNIVERSITY OF TASMANIA
Co-operative Education Degree Program (Engineering) Employer Handbook Version v1.03 AN INSTITUE OF THE UNIVERSITY OF TASMANIA Table of Contents Purpose of the Employer Handbook... 3 What is Co-operative
Credit exemptions for diplomas granted in Singapore in engineering, science and technology
s for diplomas Informatics College complete degree Cyber Security Bachelor of (Electrical and Mechatronic) (Electrical and Electronic) (Electrical and Systems ) ( and Communications) (Computer Systems)
Mechanical Engineering
Engineering-1 Mechanical Engineering Faculty: Paliwal, Chair, Chang, Facas, Grega, Sepahpour, Shih, Wang, Yan The Department of Mechanical Engineering offers an academic program leading to a Bachelor of
Admission of Students for Ph.D. Degree and Master s Degree with Scholarship in 2015 Fall semester
Admission of Students for Ph.D. Degree and Master s Degree with Scholarship in 2015 Fall semester About Yangtze University Yangtze University is a multidisciplinary comprehensive institution of higher
News. (Please inserts news description, e.g., graduation events, award ceremony, and project presentation) Events Event Name Event date
1.0 CONTINUOUS INFORMATION COLLECTION News Photo Description (Please inserts news description, e.g., graduation events, award ceremony, and project presentation) Events Event Name Event date 2.0 DEPARTMENTAL
School of Engineering
Engineering-1 School of Engineering Dean: Steven Schreiner; Assistant Dean: Martha H. Stella Click the appropriate links for Biomedical Engineering courses, Civil Engineering courses, Computer & Electrical
NIA Graduate Program: Fall 2015 FULL COURSE LIST
GEORGIA TECH NIA Graduate Program: Fall 2015 FULL COURSE LIST Aerospace Engineering (MS and PhD) AE 6009 Q Vicious Fluid Flow Menon TR9:35am-10:55am AE 6030 Q Unsteady Aerodynamics Smith TR 1:35pm - 2:55pm
ELECTRICAL ENGINEERING DEGREE. List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO
ELECTRICAL ENGINEERING DEGREE List of subjects available for 2014/2015 SCHOOL OF ENGINEERING / ESCUELA DE INGENIERÍA INDUSTRIAL UNIVERSITY OF VIGO 1 Degree: Site: (V12G320V01) Bachelor's Degree in Electrical
MAINSTREAM PROGRAMMES OFFERED AT UTM JOHOR BAHRU AND UTM KUALA LUMPUR CAMPUS SEMESTER II SESI 2015/2016 (February 2016)
MAINSTREAM PROGRAMMES OFFERED AT UTM AND UTM SEMESTER II SESI 05/06 (February 06) TYPE OF PROGRAMMES OFFERED Mainstream programmes Mainstream programmes +Industrial PhD Off Campus programmes Special Mainstream
Aerospace Engineering
West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering
OFFICIAL MASTER DEGREE PROGRAMME "ARCHITECTURAL TECHNOLOGY" Syllabus
OFFICIAL MASTER DEGREE PROGRAMME "ARCHITECTURAL TECHNOLOGY" Syllabus The studies that lead to the qualifications of the Official Master Degree in Technology in the Architecture are structured in 4 thematic
School of Engineering Supplementary/Assessment Extension Examination List Sem 1, 2012
School of Engineering Supplementary/Assessment Extension Examination List Sem 1, 2012 Unit Code Unit Name Student ID X/DA 308572 ChE 312 Process Synthesis and Design I 14241343 X 308572 ChE 312 Process
1. UUV-AUV-ROV-USV 1.1. UUV ( Unmanned Underwater Vehicle )
1. UUV-AUV-ROV-USV 1.1. UUV ( Unmanned Underwater Vehicle ) Unmanned underwater vehicles (UUV), are any vehicles that are able to operate underwater environment without a human occupant. These vehicles
Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored)
Qualifying Degree and Seat Matrix for admission to M.Tech. (Part Time and Sponsored) Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Applied Mechanics Aeronautical 00 05 Aerospace
Department of Civil Engineering Doctor of Philosophy (Ph.D.) Degree Requirements Area of Study: Water Resources Engineering
Department of Civil Engineering Doctor of Philosophy (Ph.D.) Degree Requirements Area of Study: Water Resources Engineering The Doctor of Philosophy (Ph.D.) degree requires 64 credit hours of approved
Faculty of Applied Science and Engineering University of Toronto. Chapter 7. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1.
Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter MECHANICAL ENGINEERING (Offered by the Department of Mechanical and Industrial Engineering. For a listing of Academic Staff in the Department, please refer
electrical and computer engineering AT CURTIN
Bachelor of in: Electrical Power Electronic and Communication Computer Systems Double Degrees degrees with Computer Science degrees with Physics degrees with Commerce electrical and computer engineering
CIVIL ENGINEERING EDUCATION IN CYPRUS
CIVIL ENGINEERING EDUCATION IN CYPRUS A brief review Cyprus Universities Offering Accredited Programs Cyprus University (State) -CU Department of Civil and Environmental Engineering Cyprus University of
Engineering Technology Division
93 xxx The Engineering Technology division of the Higher Colleges of Technology offers a wide range of programs at the Diploma, Higher Diploma and Bachelor of Applied Science levels. These programs prepare
Engineering Management
Graduate Catalog 2010-2011 College of 1 Management Chin-Sheng Chen, Professor and Program Director Ronald Giachetti, Associate Professor Shih-Ming Lee, Associate Professor Master of Science in Management
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and Astronautical Engineering Aeronautical Engineering Aeronautical
Class of 2016 Second Year Common CORE - 2013-2014
2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75
B.Eng. (Civil Engineering) Degree Requirement - Cohort 2014/2015
B.Eng. (Civil Engineering) Degree Requirement - Cohort 2014/2015 In order to graduate with the B.Eng. (Civil) degree, students are required to: Complete a minimum of 162 MCs with a CAP 2.0 Pass the modules
Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015. NIT Agartala
Eligibility Matrix for admission to MTech./MArch./MPlan./MDes./MURP/MBA Programmes under DASA-2015 (All other criteria for admission are as per DASA-2015 norms). NIT Agartala Sl No. Department Postgraduate
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings Master of Engineering Program Requirements: The student must complete a total of 30 credit hours
Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics
Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year
Waterloo Engineering Design Case Studies Group
Waterloo Engineering Design Case Studies Group Colin Campbell, Steve Lambert, Oscar Nespoli University of Waterloo, Ontario, Canada (http://design.uwaterloo.ca) 1. Abstract In this paper we provide an
1B Students in Mechanical Engineering So What s Ahead? Mechanical Engineering Degree Requirements, Electives, Options, etc.
Department of Mechanical & Mechatronics Engineering 1B Students in Mechanical Engineering So What s Ahead? Mechanical Engineering Degree Requirements, Electives, Options, etc. Some People in Mechanical
Proposal for Combined BSME/MSE Program in Department of Civil and Mechanical Engineering at IPFW
Proposal for Combined BSME/MSE Program in Department of Civil and Mechanical Engineering at IPFW 1. Names of the multiple-degree program - Combined Bachelor of Science in Mechanical Engineering and Master
Asynchronous streaming media
NIA Graduate Program: Spring 2015 FULL COURSE LIST GEORGIA TECH Aerospace Engineering (MS and PhD) AE 6012 Q Turbulent Flows Menon *TR 1:30-3:00 PM AE 6042Q Computational Fluid Dynamics Ruffin *MW 9:00-11:00
NAVAL ARCHITECTURE, OCEAN AND MARINE ENGINEERING
NAVAL ARCHITECTURE, OCEAN AND MARINE ENGINEERING NAVAL ARCHITECTURE, OCEAN AND MARINE ENGINEERING Naval Architects, Ocean and Marine Engineers deal with the world s largest moving structures and most powerful
INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING
Czech Technical University in Prague Faculty of Engineering Assiut University INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING Assiut University awards at
ACADEMIC REQUIREMENTS FOR PROFESSIONAL ENGINEER REGISTRATION IN CANADA
ACADEMIC REQUIREMENTS FOR PROFESSIONAL ENGINEER REGISTRATION IN CANADA Roger Toogood Dept. of Mechanical Engineering, University of Alberta, Edmonton, Canada roger.toogood@ualberta.ca Abstract: Engineers
PROGRAMME REGULATIONS. Programme Schedule. Bachelor of Engineering Technology. 1. Programme Schedule. 2. Programme Specific Admission
PROGRAMME REGULATIONS Programme Schedule Bachelor of Technology To be read in conjunction with the Bachelors Generic Regulations. All academic issues in relation to the Bachelor of Technology will be carried
Mechanical Engineering (BS)
UNIVERSITY OF SOUTH ALABAMA MECHANICAL ENGINEERING (BS) 1 Mechanical Engineering (BS) Degree Requirements First Year EH 101 MA 125 4 hrs CH 131 4 hrs EG 101 2 hrs Gen Ed* Spring 17 EH 102 MA 126 4 hrs
College of Science and Technology. Department of Applied Engineering and Technology
College of Science and Technology Department of Applied Engineering and Technology Who are we? All AET programs are applied engineering and technology-based with the majority of courses providing quality
Concentration in Bioengineering - Chemical Engineering Program Guide 03/10/05
Concentration in Bioengineering - Chemical Engineering Program Guide 03/10/05 There are three basic components to earning a concentration in bioengineering: A. two courses that are part of the standard
Guidelines for Course Selection MS Degree Students
Guidelines for Course Selection MS Degree Students For an MS degree in the Mechanical and Industrial Engineering Department (MIE) a minimum of 30 credits are required. For an MS Thesis student, up to 9
Bachelor of Science (BSc), Information Technology (IT) Semester-based Layout of the Program
DEGREE PROGRAMS OUTLINE Advanced School of Systems and Data Studies (ASSDAS) Bachelor of Science (BSc), Information Technology (IT) Semester-based Layout of the Program PROGRAM Information Technology QUALIFICATION
Poznan University of Technology Faculty of Electrical Engineering
Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16
Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics
![Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics](/thumbs/31/15234787.jpg "Seat Matrix for M.Tech [Part-Time & Sponsored] Programmes. Department Programme Qualifying Degree Part Time Sponsored Applied Mechanics Mechanics")
Ekksrhyky usg: jk Vªh; izks ksfxdh lalfkku bykgkckn bykgkckn&211004 [Hkkjr] Motilal Nehru National Institute of Technology Allahabad Allahabad-211004 [India] Seat Matrix for M.Tech [Part-Time & Sponsored]
Types of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
University of Windsor Senate. 5.4.1: University of Windsor Degree Completion Programs for Study Group Foundation Diploma Graduates
University of Windsor Senate Sa110211-5.4.1 5.4.1: University of Windsor Degree Completion Programs for Study Group Foundation Diploma Graduates Item for: MOTION: Approval That the proposed degree completion
Tek-Tips & Eng-Tips Media Kit
Tek-Tips & Eng-Tips Media Kit Since 1998 NetHawk Interactive, Incorporated has provided technology marketers with the only dedicated team of professionals in the world exclusively representing their interests
Number Percent Occurred in a highway or street construction work zone: 492 58.5 Vehicle or equipment-related 465 55.3 Other event 27 3.2 Occurred outside a work zone: 349 41.5 Vehicle or equipment-related
www.aau.dk www.esbjerg.aau.dk Danish Subsea Center Introduction to debate at meeting in Danish Subsea Network 17 th of June 2013
1 Danish Subsea Center Introduction to debate at meeting in Danish Subsea Network 17 th of June 2013 Welcome Presentation Anders Schmidt Kristensen M.Sc. in Mechanical Eng. from Aalborg University in 1993
Diploma in Electrical Engineering DEE
Diploma in Electrical Engineering DEE Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design I Electro Magnetic fields Analog
B. Eng. (Hons.) Chemical Engineering (Minor: Environmental Engineering)
B. Eng. (Hons.) Chemical Engineering (Minor: Environmental Engineering) 1. Introduction Chemical engineering is a broad based discipline that extends to numerous areas of technology and development. Chemical
DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002)
DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002) COURSE DESCRIPTION PETE 512 Advanced Drilling Engineering I (3-0-3) This course provides the student with a thorough understanding of
FACULTY OF ENGINEERING AND INFORMATION SCIENCES
FACULTY OF ENGINEERING AND INFORMATION SCIENCES ENGINEERING INFORMATION & COMMUNICATION TECHNOLOGY MATHEMATICS & STATISTICS PHYSICS ENGINEERING Master of Engineering go.uow.edu.au/meng 083844B ENTRY REQUIREMENTS
Offshore technology- Industrial Asset Management - Master's Degree Programme
Offshore technology- Industrial Asset Management - Master's Degree Programme Credits: 120 credits Level: Master's degree (2 years) Offered by: Faculty of Science and Technology, Department of Mechanical
RESUME for Dr. Walter L. Kuehnlein
RESUME for Dr. Walter L. Kuehnlein Born 1959 Nationality: German Languages: German, English Involvement Chairman of ATC 2016, www.arctictechnologyconference.org Chairman of the Board of Directors of the
Chemical Engineering Dual Degree Courses & Credits Distribution
Chemical Engineering Dual Degree Courses & Credits Distribution Credits Distribution: UG Category Total Credits Basic Sciences 22 Engineering Arts and Science 18 Humanities and Social Sciences 1 Programme
Offshore Technology- Industrial Asset Management - Master's Degree Programme
Offshore Technology- Industrial Asset Management - Master's Degree Programme Credits: 120 credits Level: Master's degree (2 years) Offered by: Faculty of Science and Technology, Department of Mechanical
Associate Engineer AEng AMIEI. Application for the registered title
Associate Engineer AEng AMIEI Application for the registered title This page to be retained by applicant Why should you become an Associate Engineer? Your ability to apply and practice your engineering
EDITH COWAN UNIVERSITY
EDITH COWAN UNIVERSITY Master OF Engineering Edith Cowan University Edith Cowan University is Western Australia s second largest university, with a diverse mix of local, interstate and international students.
Course scheme of the bachelor and master degree programme of Sales Engineering and Product Management at the RUHR-UNIVERSITÄT BOCHUM
RUHR-UNIVERSITÄT BOCHUM Course scheme of the bachelor and master degree programme of Sales Engineering and Product Management at the RUHR-UNIVERSITÄT BOCHUM valid from WS 09/10 Modul Modul-description
INTERNATIONAL GRADUATE PROGRAMMES
University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech
The energy and sustainability concentration emphasizes the mechanical aspects of energy conversion and management.
Elective Concentrations The program in Mechanical Engineering is designed to appeal to students with a wide variety of interests and professional goals. By an appropriate choice of elective courses, students
Course Provider Type Course Title cost Address of Course Location Zip Code of Course Location Fletcher Technical Community College Face2Face Advanced
Course Provider Type Course Title cost Address of Course Location Zip Code of Course Location Fletcher Technical Community College Face2Face Advanced Diesel Electrical Systems $ 254.44 310 St. Charles
Powering up your ENERGY business processes
Powering up your ENERGY business processes Powering up your ENERGY business processes In these diffi cult economic times where ecological concerns are rapidly increasing, companies race to optimize performance
An Intercampus Graduate School of Marine Sciences and Technology
Session 2478 An Intercampus Graduate School of Marine Sciences and Technology Eugene E. Niemi, Jr. University of Massachusetts Lowell I. Introduction Four of the colleges that make up the University of
Programmes with quality approval by the ECPU SCHOOL OF ENGINEERING AND APPLIED SCIENCES NICOSIA
Update: Wednesday, 14 th September, 2015 A private university with license of Operation may offer programs that will be automatically recognized by the state, without submit them to ECPU for the evaluation
P. O. BOX 62000-00200 NAIROBI TELEPHONE: 067-52181-4, 52711, fax: 067 52197 Office of the Deputy Vice Chancellor (Administration) INTERNAL ADVERT
P. O. BOX 62000-00200 NAIROBI TELEPHONE: 067-52181-4, 52711, fax: 067 52197 Office of the Deputy Vice Chancellor (Administration) INTERNAL ADVERT JKU/ADM/3E 21 st January, 2015 Jomo Kenyatta University
Fields of Research/Training Petroleum Economics & Foreign Appraisal, Geoscience Research, Basin Research. Refining, Pet. Products, Petrochemicals
Oil & Gas 1. Keshava Deva Malaviya Institute of Petroleum Exploration (KDMIPE) 2. The Indian Institute of Petroleum (IIP) 3. Geodata Processing and Interpretation Center (GEOPIC) 4. Institute of Drilling
Australian. Professional Engineering Programs. Accredited by. Engineers Australia
Australian Professional Engineering Programs Accredited by Engineers Australia (Last updated: 24 April 2013) Introduction Accreditation of Australian Professional Engineering Programs The Institution of
Graduate Studies and Research. Graduate Programmes 2015
Graduate Programmes 2015 Contents Types of graduate research degree 1 Minimum admission requirements 2 Tutiton Fees 3 Funding and Scholarships 3 Prospective research areas by research thrusts/clusters
www.tu.kielce.pl Fields of stu dy in English:
Kielce, the city where the University of Technology is located, lies in the very heart of Poland in central Europe, half the way between Warsaw and Cracow. The nearby Świętokrzyskie Mountains are one of
Bachelor of Engineering Technology
Bachelor of Technology with endorsements in: Civil Electrical Mechanical Wintec code: SC1001 MoE: WK2611 Level: 7 Credits: 360 Owner: Centre for Industrial Design Effective Date: January 20 These regulations
OUR CONVERSATION TODAY
OUR CONVERSATION TODAY Our goal is to raise the level of awareness around the natural gas supply chain among key stakeholders in order to facilitate positive working relationships and more informed decision
Center for Dynamic Data Analytics (CDDA) An NSF Supported Industry / University Cooperative Research Center (I/UCRC) Vision and Mission
Photo courtesy of Justin Reuter Center for Dynamic Data Analytics (CDDA) An NSF Supported Industry / University Cooperative Research Center (I/UCRC) Vision and Mission CDDA Mission Mission of our CDDA
Ocean Engineering Program Graduate Curriculum at Texas A&M University
Ocean Engineering Program Graduate Curriculum at Texas A&M University The Ocean Engineering Program offers three graduate degrees in coastal and ocean engineering. These are the Master of Engineering,
Hydrodynamic Loads on Two-Dimensional Sheets of Netting within the Range of Small Angels of Attack
Hydrodynamic Loads on Two-Dimensional Sheets of Netting within the Range of Small Angels of Attack by Mathias Paschen & Karsten Breddermann 10 th International Workshop Methods for the Development and
University of Évora BES CHAIR in Renewable Energies
University of Évora BES CHAIR in Renewable Energies Presentation and Activities overview March 2014 Pedro Horta (phorta@uevora.pt) BES Chair in Renewable Energies Chairman: Prof. Manuel Collares Pereira
Professionals in oil, gas and power projects LEADING IN OIL, GAS AND POWER PROJECTS
Professionals in oil, gas and power projects LEADING IN OIL, GAS AND POWER PROJECTS More successful with STAR, the expert in Oil, Gas and Power Projects Projects in Oil, Gas and Power generating industries
ASNE Intelligent Ships Symposium X. Navy Research @Villanova. Dr. Gary A. Gabriele Drosdick Endowed Dean of Engineering
ASNE Intelligent Ships Symposium X Navy Research @Villanova Dr. Gary A. Gabriele Drosdick Endowed Dean of Engineering Some numbers and highlights 930 Undergraduate Students 400 Graduate Students 61 Tenured
Careers in Engineering Guide
Careers in Engineering Guide the brighter choice WHY ENGINEERING? An engineering degree is a big challenge to take on. There is no denying it s an intensive subject to study, but all the hard work does
How To Understand And Understand Mechanical Engineering At Wpi
Mechanical Engineering Scientists discover the world that exists; engineers create the world that never was. Theodore von Karman Mechanical Engineering at WPI John M. Sullivan, Jr. Associate Department
What can I do with a degree in... Engineering
What can I do with a degree in... Engineering The Department of Physics offers a spectrum of courses reflective of both the integral character of physics in the liberal arts curriculum and its essential
ANNEX 8-A PROFESSIONALS
ANNEX 8-A PROFESSIONALS 1 Computer Hardware 2 Design Engineers 2 Computer network products developer 3 Recorder developer 4 Hard disk developer 5 Controller developer 6 Computer products Engineers 7 Computer
Program Academic program code
4101 Aerospace Engineering (4 Years, Bachelor of Technology) 4102 Agricultural and Food Engineering (4 Years, Bachelor of Technology) 4103 Biological Sciences and Bioengineering (4 Years, Bachelor of Technology)
ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015
DEPARTMENT OF TECHNICAL EDUCATION : CHENNAI 600 025 ADMISSION TO PG (MBA / MCA / M.E. / M.TECH. / M.ARCH. / M.PLAN) DEGREE COURSES 2014-2015 ELIGIBLE QUALIFICATION(S) FOR PG DEGREE COURSES PRESCRIBED BY
A Grid-enabled Workflow System for Reservoir Uncertainty Analysis
UCoMS A Grid-enabled Workflow System for Reservoir Uncertainty Analysis Emrah Ceyhan, Gabrielle Allen, Chris White, Tevfik Kosar* Center for Computation & Technology Louisiana State University June 23,