Asynchronous streaming media
|
|
|
- Angel Hunter
- 8 years ago
- Views:
Transcription
1 NIA Graduate Program: Spring 2015 FULL COURSE LIST GEORGIA TECH Aerospace Engineering (MS and PhD) AE 6012 Q Turbulent Flows Menon *TR 1:30-3:00 PM AE 6042Q Computational Fluid Dynamics Ruffin *MW 9:00-11:00 AM AE 6344 Q Aircraft Design II Mavris *MW 3:00-7:00 PM AE 6361 Q Propulsion System Design I Tai/Schutte *MWF 11:00-12:00 AM AE 6445Q Combustor Fundamentals Scarborough *MWF 1:00-2:00 PM AE 6520Q Advanced Flight Dynamics Clarke *TR 1:30-3:00 PM AE 6760Q Acoustics I Cunefare *TR 1:30-3:00 PM AE 6766Q Combustion Sun *TR 8:00-9:30 AM AE 8803QGE Special Topics: Optimization for Design of Engineered SyGerman *MWF 1:00-2:00 PM AE 8803QSA Special Topics: Wind Engineering Sankar *TR 9:30-11:00 AM *Synchronous (live) course received or delivered from NIA. + Course instructor on-site at NIA NORTH CAROLINA STATE UNIVERSITY Mechanical and Aerospace Engineering (MS and PhD) MAE Graduate Preparation: Engineering Statics and Dynamics MAE Graduate Preparation: Thermodynamics and Fluids MAE Graduate Preparation: Engineering Structures and Vibrations MAE 501 Advanced Engineering Thermodynamics MAE 518 Acoustic Radiation I MAE 521 Linear Control and Design for Mimo Systems MAE 535 Design of Electromechanical Systems MAE 543 Fracture Mechanics MAE 562 Physical Gas Dynamics MAE 586 Project Work in Mechanical Engineering MAE Special Topics: Fundamentals of Product Design MAE Special Topics: Mechanical Design Engineering Electrical and Computer Engineering (courses only) ECE 506 Architecture of Parallel Computers ECE 515 Digital Communications
2 ECE 516 ECE 520 ECE 521 ECE 534 ECE 535 ECE 542 ECE 544 ECE 552 ECE 573 ECE 575 ECE 579 ECE 592 System Control Engineering Digital Asic Design Computer Design and Technology Power Electronics Design of Electromechanical Systems Neural Networks Design of Electronic Packaging and Interconnects Renewable Electric Energy Systems Internet Protocols Introduction to Wireless Networking Introduction to Computer Performance Modeling Special Topics: Electric Motor Drives ECE 712 ECE 719 ECE 736 ECE 751 ECE 776 Engineering (courses only) EGR EGR EGR EGR Industrial & Systems Engineering (courses only) ISE 501 ISE 540 ISE 541 ISE 553 ISE 589 ISE 716 Integrated Circuit Design for Wireless Communications Advanced Microwave Designs Power Systems Stability and Control Detection and Estimation Theory Design & Performance Evaluation of Network Systems & Services Engineering Leadership and Strategic Change Managing New High-Tech Product Launches Statistical Engineering Using Six Sigma DMAIC Process Managerial Finance for Engineers Introduction to Operations Research Human Factors in Systems Design Occupational Safety Engineering Modeling and Analysis of Supply Chains Special Topics: Simulation Modeling with SIMIO Automated Systems Engineering ISE 723 ISE 748 Production Planning, Scheduling and Inventory Control Quality Engineering
3 ISE 754 Logistics Engineering Materials Sciences and Engineering (courses only) MSE 500 Modern Concepts in Materials Science MSE 555 Polymer Technology and Engineering MSE 556 Composite Materials MSE 565 Introduction to Nanomaterials MSE 580 Materials Forensics MSE 702 Defects in Solids MSE 705 Mechanical Behavior of Engineering Materials MSE 757 Radiation Effects on Materials Defects, Diffusion and Ion Implantation in MSE 770 Semiconductors Advanced Topics: High Temperature Deformation of MSE Materials Advanced Topics: Mechanical Properties of MSE Nanostructured Materials These courses are offered asynchronously and utilize WEB accessible streaming or CDROMs delivered to the student. For updates on asynchronous courses go to: + Course instructor on-site at NIA
4 NORTH CAROLINA A&T UNIVERSITY Computer Engineering CSC 506 Architecture of Parallel Computers CSC 510 Software Engineering CSC 541 Advance Data Structures CSC 573 Internet Protocols CSC 575 Introduction to Wireless Networking CSC 579 Introduction to Computer Performance Modeling CSC Special Topics: Social Computing CSC Special Topics: Advanced Algorithms CSC 600 Computer Science Graduate Orientation CSC 750 Service-Oriented Computing Design & Performance Evaluation of Network Systems CSC 776 & Services CSC Special Topics: Social Computing CSC Special Topics: Advanced Algorithms These courses are offered asynchronously and utilize WEB accessible streaming or CDROMs delivered to the student. For updates on asynchronous courses go to: OLD DOMINION UNIVERSITY Mechanical and Aerospace Engineering ( MS and PhD) MAE 503 Flight Mechanics Newman *XX TR 1:00-2:15 PM MAE 507 Ground Vehicle Aerodynamics Britcher *XX TR 9:30-10:45 AM MAE 602 Fluid Dynamics and Aerodynamics Ahmed *XX MW 1:00-2:15 PM MAE 603 Advanced Mechanics of Solids Hou *XX TR 2:45-4:00 PM MAE 672 Design of Experiments Landman *XX TR 1:30-2:45 PM MAE 746/846 Advanced Control Methodologies Newman *XX MW 5:00-6:15 PM MAE 780/880 Engineering Optimization Hou *XX M 4:20-7:00 PM MAE 787/887 Life Cycle Engineering Bao *XX TR 5:45-7:00 PM * Synchronous (live) course received or delivered from NIA XX ONLINE Course. Primarily received at desktop.
5 UNIVERSITY OF MARYLAND Aerospace Engineering ( MS and PhD) ENAE 633 Helicopter Dynamics Chopra *TR 9:30-10:45 AM ENAE 652 Computational Structural Mechanics Lee *MW 5:10-6:25 PM ENAE 656 Aeroelasticity Haas *F 2:00-5:00 PM ENAE 788F Selected Topics in Aerospace Engineering; Introduction to Aviation for Pilot Training Bechara *T 4:00-6:40 PM * Synchronous (live) course received or delivered from NIA +Course instructor on-site at NIA UNIVERSITY OF VIRGINIA Civil Engineering CE 6010 Computational Methods in Civil Engineering Lung XX TR 5:00-6:15 PM Chemical Engineering (courses only) ChE 6618 Chemical Reaction Engineering Koenig XX MW 5:00-6:15 PM Electrical and Computer Engineering (MS and Ph.D.) ECE 7858 Digital Control Systems Tao XX MW 3:30-4:45 PM ECE 6502 Photovoltaics Gupta XX TR 2:00-3:15 PM Materials Sciences and Engineering (MS and Ph.D) MSE 7340 Phase Transformations Soffa XX MW 5:00-6:15 PM MSE 6020 Defects and Microstructure in Materials Zhigilei XX TR 3:30-4:45 PM MSE 6320 Deformation and Fracture of Structural Materials Agnew XX TR 5:00-6:15 PM Mechanical and Aerospace Engineering (MS and Ph.D) MAE 6710 Finite Element Analysis Panzer XX MW 6:30-7:45 PM MAE 6430 Statistics for Engineers & Scientists Richards On-line course (asynchronous) MAE 7860 Digital Control Systems Tao XX MW 3:30-4:45 PM Systems Engineering (MS and Ph.D.) SYS 6014 Decision Analysis Patek XX MW 6:30-7:45 PM Almost all CGEP courses from UVA are delivered in a real-time, interactive format. UVA believes that there is educational value in real-time intereaction between faculty and students and between students. CGEP students are stronly encouraged to attend their UVA coures in real-time. CGEP students are discouraged from enrolling in UVA CGEP degree programs if they believe they will not be able to usually attend classes in real-time.
6 VIRGINIA TECH Aerospace and Ocean Engineering (MS and Ph.D) AOE 5114 High Speed Aerodynamics Grossman XX ARR AOE 5144 Boundary-Layer Theory Schetz XX ARR AOE 5304 Advanced Naval Architecture McCue-Weil XX ARR AOE 5305 Marine Engineering Hudson XX ARR AOE 5314 Naval Ship Sys Design & Effect Brown XX ARR XX - Online Course Civil and Environmental Engineering (MS and Ph. D.) CEE 4114 Fundamentals of Public Health Engineering Vikesland XX W 4:00-6:45 PM CEE 5724 Environmental Monitoring and Sampling Gallagher XX T 7:00-9:45 PM CEE 5984 SS: Sustnbl Transprtn Infrastr Flintsch XX R 7:00-9:45 PM Electrical Computer Engineering (MS and Ph.D) ECE 4644 Satellite Communications MacKenzie XX MW 4:00-5:15 PM ECE 5164 Introduction to Space Science I: The Solar Wind and Magnetosphere Clauer +*TR 9:30-10:45 AM ECE 5764 Applied Linear Control Southward TR 12:30-1:45 PM ECE 5984 Artificial Intelligence & Engineering Apps. Vanemann XX M 7:00-9:45 PM Engineering ENGR 5004 Systems Engineering Process Vanemann XX M 7:00-9:45 PM Industrial Systems Engineering (MS and Ph.D.) ISE 5134 Management Information Systems Geraghty XX R 4:00-6:45 PM ISE 5174 Engineering Project Management Harmon XX T 4:00-6:45 PM Materials Science and Engineering (MS and Ph.D.) MSE 5016 MSE Seminar Asryan ARR MSE 5234 Mater Sci Surfaces Interfaces Kelley *MW 12:30-1:45 PM Mechanical Engineering (MS and Ph.D.) ME 5324 Radiation Heat Transfer Mahan *TR 11:00-12:15 PM ME 5424 Turbomachinery O'Brien *TR 8:00-9:15 AM ME 5564 Applied Linear Control Southward ARR ME 5714 Digital Signal Processing Wicks *MWF 10:10-11:00 AM ME 5734 Advanced Engineering Acoustics Fuller *+ TR 2:00-3:15 PM ME 6104 Advanced Topics in Thermodynamics von Spakovsky *TR 9:30-10:45 AM ME 6434 Computational Fluid Dynamics Heat Transfer Tafti *TR 12:30-1:45 PM
7 # Courses are available for graduate credit *Synchronous (live) course received or delivered from NIA XX ONLINE course. Primarily received at desktop. + Course instructor on-site at NIA. **Synchrounous (live) course delivered at the Peninsula Graduate Center MSE and ME courses are delivered at NIA Headquarters.
NIA Graduate Program: Fall 2015 FULL COURSE LIST
GEORGIA TECH NIA Graduate Program: Fall 2015 FULL COURSE LIST Aerospace Engineering (MS and PhD) AE 6009 Q Vicious Fluid Flow Menon TR9:35am-10:55am AE 6030 Q Unsteady Aerodynamics Smith TR 1:35pm - 2:55pm
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings
College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings Master of Engineering Program Requirements: The student must complete a total of 30 credit hours
COMMONWEALTH GRADUATE ENGINEERING PROGRAM FALL 2011 COURSE OFFERINGS in REGION 2000
COMMONWEALTH GRADUATE ENGINEERING PROGRAM FALL 2011 COURSE OFFERINGS in REGION 2000 In conjunction with George Mason University, Old Dominion University, University of Virginia (U.Va.), Virginia Commonwealth
Aerospace Engineering
West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering
MASTER OF ENGINEERING Mechanical Engineering Program
MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.
Welcome to The College of Engineering at Virginia Tech. Information Session
Welcome to The College of Engineering at Virginia Tech Information Session Virginia Tech Engineering Student Traits Creativity Plan to study Interest in Math and Science Teamwork Are You Ready? Challenging
Guidelines for Course Selection MS Degree Students
Guidelines for Course Selection MS Degree Students For an MS degree in the Mechanical and Industrial Engineering Department (MIE) a minimum of 30 credits are required. For an MS Thesis student, up to 9
Class of 2016 Second Year Common CORE - 2013-2014
2013-2014 Engineering and Applied Science Calendar Class of 2016 Second Year Common CORE - 2013-2014 APSC 200 Engineering Design and Practice II F 3-0-1 4 APSC 293 Engineering Communications F.25-0-.75
Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering
Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:
THE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING
THE DANIEL GUGGENHEIM SCHOOL OF AEROSPACE ENGINEERING COLLEGE OF ENGINEERING AEROSPACE ENGI- ING Scott Horowitz, MS AE 1979, PhD AE 1982, enjoyed a successful career as a NASA astronaut, flying in four
Departments and Specializations
Departments and Specializations Department Post Specialization Areas Aerospace Engineering: Only candidates with a clear focus on one or more of the specified areas will be considered Experimental Structural
MECHANICAL ENGINEERING
MECHANICAL ENGINEERING THE MECHANICAL ENGINEERING MAJOR AT A GLANCE: If you want to design and build things, then you should consider majoring in Mechanical Engineering. Mechanical Engineering is, more
Department of Mechanical Engineering. Master s Degree Program in Aerospace Engineering
Department of Mechanical Engineering Master s Degree Program in Aerospace Engineering 2014-2015 McGill University June 15, 2015 Contents 1 Introduction 3 2 Degree Requirements 4 3 Core Courses 5 3.1 Candidates
When should I declare a major? Students who have not declared a major should do so by the third semester.
PRE-REGISTRATION FAQ FALL 2013 March 18, 2013 Mechanical Engineering (BSME) Requirements and Courses What are the BSME degree requirements? The best way for a student to track degree requirements is to
SECOND YEAR. Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300) 3 TOTAL 3 TOTAL 6. MASTER OF ENGINEERING IN ELECTRICAL ENGINEERING (MEng EE) FIRST YEAR
MASTER OF SCIENCE IN ELECTRICAL ENGINEERING (MS EE) FIRST YEAR Elective 3 Elective 3 Elective 3 Seminar Course (EE 296) 1 TOTAL 12 TOTAL 10 SECOND YEAR Major Subject 3 Thesis (EE 300) 3 Thesis (EE 300)
Spring 2016 Course Registration Information for MS Mechanical Engineering
Spring 2016 Course Registration Information for MS Mechanical Engineering Congratulations on your acceptance to MS Mechanical Engineering program at Northeastern University! At this time we suggest that
Aerospace Engineering
West Virginia University 1 Aerospace Engineering Degrees Offered Masters of Science, Aerospace Engineering (M.S.A.E.) Doctor of Philosophy, Aerospace Engineering (Ph.D.) Educational objectives of the departmental
Types of Engineering Jobs
What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link
How To Understand Engineering
ENGINEERING YOUR FUTURE Dr. Vlasov 1 Outline 1. Importance of Engineering 2. Major Engineering Disciplines 3. Engineering Functions 4. Engineering Majors 5. Statistical Overview Dr. Vlasov 2 Importance
PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Sr./I.D No.
PPIMT DATE SHEET GJU EXAMINATION DEC. 2014 M = Morning (10:00 A.M. to 01:00 P.M.) And E = Evening (02:00 P.M to 05:00.P.M.) Date of Exams. Class Paper code Nomenclature Sr./I.D No. Sessi on 08.12.2014
MMAE Co- terminal Degrees Summary
MMAE Co- terminal Degrees Summary Co- terminal Degrees within MMAE (MAS = master of engineering, i.e. non- thesis masters): BS Mechanical Engineering + MAS Mechanical and Aerospace Engineering BS Aerospace
Subject Name. Exam Date. Session CONTROLLER OF EXAMINATIONS
CY2111 GE2111 GE2112 HS2111 MA2111 PH2111 CY2161 GE2151 HS2161 MA2161 ME2151 PH2161 AE22 AE22 AE22 AE22 MA2211 ME22 AE2251 AE2252 AE2253 AE2254 AE2255 MA2264 AE23 AE23 AE23 AE23 EE2365 GE21 AE21 AE22 AE23
Mechanical and Aerospace Engineering Graduate Program. Graduate Student Handbook. Academic Year 2013-2014
Mechanical and Aerospace Engineering Graduate Program Graduate Student Handbook Academic Year 2013-2014 Mechanical and Aerospace Engineering Graduate Program School for Engineering of Matter, Transport
Graduate Programs in Mechanical and Aerospace Engineering
Graduate Programs in Mechanical and Aerospace Engineering Space System Engineering Aerodynamics & Computational Fluid Dynamics (CFD) Aerospace Structures and materials Dynamics, Vibration and Controls
Wright State University
Wright State University of Engineering and Computer Science Graduate Programs Quarters to Semesters For Further Information Contact of Engineering and Computer Science Wright State University 05 Russ Engineering
INTERNATIONAL GRADUATE PROGRAMMES
University of Trento Department of Industrial Engineering INTERNATIONAL GRADUATE PROGRAMMES MASTERMAT - MATERIALS ENGINEERING MASTERMECH - MECHATRONICS ENGINEERING international.unitn.it/mastermat international.unitn.it/mastermech
Master's Programs. Applied Chemisty. Subject
Master's Programs Applied Chemisty Optional Advanced Seminar in Materials Science and Engineering I Advanced Seminar in Materials Science and Engineering II Special Project in Materials Science and Engineering
Curriculum Vita. Bachelor of Science, Mechanical Engineering, 1985 North Carolina State University, Raleigh, North Carolina
Curriculum Vita Gregory K. Watkins, Ph.D., PE Department of Mechanical and Mechatronic Engineering and Sustainable Manufacturing California State University Chico Voice: 530.898.4388 Fax: 530.898.4070
Faculty of Applied Science and Engineering University of Toronto. Chapter 7. Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter 1.
Chapter 5 Chapter 4 Chapter 3 Chapter 2 Chapter MECHANICAL ENGINEERING (Offered by the Department of Mechanical and Industrial Engineering. For a listing of Academic Staff in the Department, please refer
MINOR IN SUSTAINABLE ENERGY SYSTEMS AT CORNELL
Contacts Curriculum Development: Prof. J. W. Tester Director, Energy Institute jwt45@cornell.edu Administration: Carol Casler Chem. & Bio. Engr. 120 Olin Hall cad1 @cornell.edu 607-255-8656 MINOR IN SUSTAINABLE
Poznan University of Technology Faculty of Electrical Engineering
Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16
James L. Salmon, Ph.D., P.E. Senior Engineer 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE
James L. Salmon, Ph.D., P.E. 513-376-7974 direct 513-254-5949 mobile jsalmon@caulfieldeng.com PROFESSIONAL EXPERIENCE Current Caulfield Engineering, LLC Naperville, Illinois Dr. Salmon specializes in the
Mechanical Engineering PhD / MASc / MEng
Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate ii Ryerson
B.E. (OLD) (All Branches) Term-I & II Examinations,May/June, 2016
(OLD) (All Branches) Term-I & II NORTH MAHARASHTRA UNIVERSITY, JALGAON Circular No. 108 of 2016 Programme of [ All Branches ( Term-I & II ) Course:Jully 2008 Examinations, May/June, 2016 1) Candidates
DOCTORATE OF PHILOSOPHY
DOCTORATE OF PHILOSOPHY ENGINEERING SCIENCE WITH CONCENTRATION IN CONSTRUCTION MANAGEMENT Course Requirements Ph.D. 54 credit hours (with a BS degree) The Construction Management concentration requirements
Plan of Study for Acoustical Engineering Concentration in Multidisciplinary Engineering. 120 credits. ABET accredited (BSE).
Plan of Study for Acoustical Engineering Concentration in Multidisciplinary Engineering. 120 credits. ABET accredited (BSE). Credits First year Engineering Program: If the common first year program in
Department of Electrical and Computer Engineering Checklist for MSEE Degree
Department of Electrical and Computer Engineering Checklist for MSEE Degree Student name: ; email: Month/year enrolled: ; Graduation date: I certify that the information contained on this form is correct.
Assistant Professor: Rs.12,000-420-18,300/- plus allowances as admissible to Central Government employees.
Indian Institute of Technology Kharagpur 721302 Faculty Openings The Institute invites applications from Indian nationals, possessing excellent academic background, commitment to quality teaching and potential
Foundation Year for Engineering, Physics and Geophysics. Faculty of Engineering, Science and Mathematics
Foundation Year for Engineering, Physics and Geophysics Faculty of Engineering, Science and Mathematics Development of electronic technology Who is the course for? The Foundation Year is the first year
HANDBOOK FOR THE APPLIED AND COMPUTATIONAL MATHEMATICS OPTION. Department of Mathematics Virginia Polytechnic Institute & State University
HANDBOOK FOR THE APPLIED AND COMPUTATIONAL MATHEMATICS OPTION Department of Mathematics Virginia Polytechnic Institute & State University Revised June 2013 2 THE APPLIED AND COMPUTATIONAL MATHEMATICS OPTION
Masters of Engineering Degree
Annex 2 Masters of Engineering Degree The curriculum in the Master of Engineering Program is structured to provide a foundation of advanced engineering topics while allowing students flexibility to meet
Vorarlberg University of Applied Sciences - Dornbirn, Austria
The Magellan Exchange GRADUATE/MASTER Course Offerings in English List is as up-to-date as possible as of 30 November 2015 (Variation may occur; please use this as a general guide only. Credits and course
Mechanical Engineering (BS)
UNIVERSITY OF SOUTH ALABAMA MECHANICAL ENGINEERING (BS) 1 Mechanical Engineering (BS) Degree Requirements First Year EH 101 MA 125 4 hrs CH 131 4 hrs EG 101 2 hrs Gen Ed* Spring 17 EH 102 MA 126 4 hrs
The Hong Kong Polytechnic University
The Hong Kong Polytechnic University Faculty of Engineering An Opportunity to Earn Two Master s Degrees in One Year A concurrent enrolment program leading to a Master of Science (MSc) degree awarded by
College of Engineering Mechanical Engineering Depart. rtment. Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies
Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies College of Engineering Mechanical Engineering Depart rtment Master of Science in Mechanical Engineering Mechanical
PROPOSED CHANGES TO THE AEROSPACE ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016
PROPOSED CHANGES TO THE AEROSPACE ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016 Type of Change Academic Change 1. IF THE ANSWER TO ANY OF THE FOLLOWING
MECHANICAL ENGINEERING
MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Program coordinator Mechanical Engineering 19/11/2015 1 CONTENT MASTER MECHANICAL ENGINEERING
The Department of Electrical and Computer Engineering (ECE) offers the following graduate degree programs:
Note that these pages are extracted from the full Graduate Catalog, please refer to it for complete details. College of 1 ELECTRICAL AND COMPUTER ENGINEERING www.ece.neu.edu SHEILA S. HEMAMI, PHD Professor
GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S
GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. 200 YELLOW PLACE ROCKLEDGE, FL 32955 PHONE 321-631-3550 FAX 321-631-3552 www.mainstream-engr.com TABLE OF CONTENTS CORPORATE EXPERIENCE...3
Graduation Check Off Sheet, Electrical Engineering, Year 2013-2014 (Class of 2017)
Graduation Check Off Sheet, Electrical, Year 201-201 (Class of 2017) Student: Advisor: 1. Total credit hours 12. Overall GPA 2.0 2. Passing grade in all courses. Department GPA 2.0 Required Courses (enter
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and
STEM DEGREES (Degree title name has to be exactly as here) Acoustical Engineering Acoustical Engineering & Music Actuarial Science Aeronautical and Astronautical Engineering Aeronautical Engineering Aeronautical
Department of Aerospace Engineering Indian Institute of Science Bangalore
Department of Aerospace Engineering Indian Institute of Science Bangalore Brief Outline of Department The department of Aerospace Engineering is one of the oldest departments in the country encompassing
Virginia Tech s New Practice-Oriented Aerospace Engineering Master s Degree
Session 0502 Virginia Tech s New Practice-Oriented Aerospace Engineering Master s Degree W.H. Mason and B. Grossman Department of Aerospace and Ocean Engineering and Multidisciplinary Analysis and Design
Oct 2016. May 2016. Dec 2016. Jun 2016. Sept 2016. Jul 2016. Nov 2016. Aug 2016
Undergraduate Master Course Schedule ERAU Worldwide-Department of Online Learning offers undergraduate Online courses twelve terms a year (Terms have monthly starts). All undergraduate Online courses are
Course Selection Guide For Mechanical Engineering Majors
2013-2014 Course Selection Guide For Mechanical Engineering Majors University of Connecticut Department of Mechanical Engineering School of Engineering Table of Contents Table of Contents Introduction
Graduate School of Science and Technology
Contents Master's Course 2 Three Common Courses 2 Materials and Life Science Course 2 Computer and Information Science Course 3 Electrical and Mechanical Engineering Course 3 Doctor's Course 5 Materials
College of Engineering
College of Engineering Academic Programs College of Engineering ADMINISTRATIVE OFFICER Milton R. Bryant, Dean ADMINISTRATIVE STAFF Shield B. Lin, Associate Dean FACULTY Cajetan M. Akujuobi, Electrical
Engineering Outreach. eo.uidaho.edu UNIVERSITY OF IDAHO CATALOG FALL 2016. Professional Online Education
Engineering Outreach UNIVERSITY OF IDAHO CATALOG FALL 2016 Professional Online Education GET STARTED! Visit our Get Started web page at /get-started for a list of steps to take before classes begin. You
BACHELOR OF SCIENCE IN ELECTRICAL AND ELECTRONIC ENGINEERING DEGREE PROGRAMME
SEMESTER 1 BACHELOR OF SCIENCE IN ELECTRIL AND ELECTRONIC ENGINEERING DEGREE PROGRAMME CE 101 Structural Mechanics I C 3 3/4 CE 10 Fluid Mechanics I C 3/4 EE 101 Electrical Engineering C 3/4 EE 10 Electronics
M.S. in Electrical Engineering
1 M.S. in Electrical Engineering Degree Requirements Bridge Program Students who have earned a Bachelor of Science in Engineering Technology (B.S.E.T.) degree, or who lack an appropriate background may
IIST Ph.D. Programme January 2016 for Masters and Bachelors Degree holders
INDIAN INSTITUTE OF SPACE SCIENCE AND TECHNOLOGY (Declared as Deemed to be University under section 3 of the UGC act 1956) Government of India, of Space, Thiruvananthapuram 695547 IIST Ph.D. Programme
FACULTY OF ENGINEERING AND INFORMATION SCIENCES
FACULTY OF ENGINEERING AND INFORMATION SCIENCES ENGINEERING INFORMATION & COMMUNICATION TECHNOLOGY MATHEMATICS & STATISTICS PHYSICS ENGINEERING Master of Engineering go.uow.edu.au/meng 083844B ENTRY REQUIREMENTS
The purpose of this text is to provide information on engineering education, both at undergraduate and graduate level and professional licensure in
ENGINEERING EDUCATION IN THE UNITED STATES The purpose of this text is to provide information on engineering education, both at undergraduate and graduate level and professional licensure in engineering
Engineering Disciplines
Engineering Overview The Field - Engineering Disciplines - Preparation - Accreditation - Day in the Life - Earnings - Employment - Career Path Forecast - Professional Organizations The Field Engineers
Cornell University. School of Chemical and Biomolecular Engineering. Masters of Engineering Program Course Curriculum
Cornell University School of Chemical and Biomolecular Engineering Masters of Engineering Program Course Curriculum August 2012 2 Purpose of the Program The goal of the Masters of Engineering (M. Eng.)
Depth and Excluded Courses
Depth and Excluded Courses Depth Courses for Communication, Control, and Signal Processing EECE 5576 Wireless Communication Systems 4 SH EECE 5580 Classical Control Systems 4 SH EECE 5610 Digital Control
Distance Learning Program
Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance
ELECTRICAL ENGINEERING GRADUATE MANUAL. MASTERS & Ph.D. REQUIRMENTS
ELECTRICAL ENGINEERING GRADUATE MANUAL MASTERS & Ph.D. REQUIRMENTS ELECTRICAL ENGINEERING AND COMPUTER SCIENCE DEPARTMENT ELECTRICAL AND COMPUTER ENGINEERING June 2014 Revision TABLE OF CONTENTS 1. THE
Electronic & Electrical Engineering. The Traditional BE Degree Programme. Information for Stage 3 Students March 2016. Your Choices Now Electrical
& The Traditional BE Degree Programme Stage 1 Stage 2 Stage 3 Stage 4 Information for Stage 3 Students March 2016 Elec. Eng. BE BE UCD School of and Scoil na hinnealtóireachta Leictrí agus Leictreonaí
Diploma in Electrical Engineering DEE
Diploma in Electrical Engineering DEE Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design I Electro Magnetic fields Analog
Electrical and Computer Engineering (ECE)
Department of Electrical and Computer Engineering Contact Information College of Engineering and Applied Sciences B-236 Parkview Campus 1903 West Michigan, Kalamazoo, MI 49008 Phone: 269 276 3150 Fax:
Space Engineering. Discover your future in engineering. Faculty of Engineering and Information Technologies. Dr Doug Auld, Snr Lecturer
Discover your future in engineering Faculty of Engineering and Information Technologies Dr Doug Auld, Snr Lecturer Space Engineering Page 1 Scientists discover the world that exists; Engineers create the
JOINT DOCTORAL PROGRAM IN ENGINEERING AND INDUSTRIAL APPLIED MATHEMATICS
JOINT DOCTORAL PROGRAM IN ENGINEERING AND INDUSTRIAL APPLIED MATHEMATICS Conducted by California State University, Long Beach, and Claremont Graduate University JDP STUDENT HANDBOOK Contents Introduction...
di Milano the PhD Bovisa
PhD School of the Politecnico di Milano Regulations of the PhD Programme in Aerospace Engineeringg Cycle XX XX Location: Milano Bovisa 1 Proposal of a PhD Programme (PhD) administered at the Politecnico
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy 1.0 Introduction India s growing energy needs mixed with world s order for reducing
Doctor of Philosophy in Systems Engineering
Doctor of Philosophy in Systems Engineering Coordinator Michael P. Polis Program description The Doctor of Philosophy in systems engineering degree program is designed for students who plan careers in
Master of Science (Electrical Engineering) MS(EE)
Master of Science (Electrical Engineering) MS(EE) 1. Mission Statement: The mission of the Electrical Engineering Department is to provide quality education to prepare students who will play a significant
ACADEMIC AFFAIRS COUNCIL ******************************************************************************
Attachment I ACADEMIC AFFAIRS COUNCIL AGENDA ITEM: 4.D.2 DATE: April 16, 2009 ****************************************************************************** SUBJECT: Intent to Plan SDSMT PhD in Mechanical
Opportunities for PhD Students
Opportunities for PhD Students Australia Lecturer / Senior Lecturer / Associate Professor in Construction Management Faculty of Architecture, Building and Planning, University of Melbourne, Australia Associate
SCHOOL OF ENGINEERING BACHELOR S DEGREE IN AEROSPACE ENGINEERING
SCHOOL OF ENGINEERING BACHELOR S DEGREE IN WELCOME TO UNIVERSIDAD EUROPEA DE MADRID Welcome to Universidad Europea de Madrid, a young, dynamic institution, fully prepared to meet the challenges of today
Graduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
Fundamentals of Motor Vehicle Fire Investigation
An interactive, hands-on course on the fundamentals of fire science and evidence analysis techniques. Register today! NEW Fundamentals of Motor Vehicle Fire Investigation October 26-28, 2009 Exponent,
Tek-Tips & Eng-Tips Media Kit
Tek-Tips & Eng-Tips Media Kit Since 1998 NetHawk Interactive, Incorporated has provided technology marketers with the only dedicated team of professionals in the world exclusively representing their interests
ENGINEERING AT CAMBRIDGE
ENGINEERING AT CAMBRIDGE GEOFF PARKS DIRECTOR OF UNDERGRADUATE ADMISSIONS ENGINEERING Engineers are ingenious people who apply science and technology to the fulfilment of human needs and aspirations Engineers
And. and Control. Free Elective. Free elective
INTI COLLEGE WICHITA STATE UNIVERSITY BRITISH DEGREE PROGRAM ACC 262: Accounting I ACCT 210: Financial Accounting ACCT 220: Managerial Accounting ACC 363: Accounting II CSC 162: Computing I ACCT 320: Accounting
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2015-2016 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1,
Engineering Technology Division xxx
7 xxx The offers a wide range of programs. These programs prepare students to successfully move to challenging and critical positions requiring technical expertise in a modern and evolving world. Students
ENGINEERING PHYSICS I. JUSTIFICATION
ENGINEERING PHYSICS An Interdisciplinary Program Jointly Offered by the School of Engineering and the Department of Physics, College of Liberal Arts and Sciences I. JUSTIFICATION Technology is a driving
PROPOSED CHANGES TO THE ELECTRICAL ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016
PROPOSED CHANGES TO THE ELECTRICAL ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016 Type of Change Academic Change 1. IF THE ANSWER TO ANY OF THE
NATIONAL SUN YAT-SEN UNIVERSITY
NATIONAL SUN YAT-SEN UNIVERSITY Department of Electrical Engineering (Master s Degree, Doctoral Program Course, International Master's Program in Electric Power Engineering) Course Structure Course Structures
Coursework for MS leading to PhD in Electrical Engineering. 1 Courses for Digital Systems and Signal Processing
work for MS leading to PhD in Electrical Engineering 1 s for Digital Systems and Signal Processing EE 801 Analysis of Stochastic Systems EE 802 Advanced Digital Signal Processing EE 80 Advanced Digital
CATALOG CHANGES - F13. The Department of Ocean and Mechanical Engineering offers programs of study leading to the following degrees:
CATALOG CHANGES - F13 Ocean and Mechanical Engineering Department: The following changes are necessary to update the catalog. The first change is to include the combined BSME to MS degree program in the
AEROSPACE ENGINEERING SERIES, GS-0861
TS-124 May 1993 General Schedule Position Classification Flysheet AEROSPACE ENGINEERING SERIES, GS-0861 Theodore Roosevelt Building 1900 E Street, NW Washington, DC 20415-8330 Classification Programs Division
Indian Institute of Technology Hyderabad. Standing Advertisement No. IITH/2013/Faculty/5
Indian Institute of Technology Hyderabad Standing Advertisement No. IITH/2013/Faculty/5 This is a standing advertisement. There is no specific requirement on when a candidate can submit an application.
Program Academic program code
4101 Aerospace Engineering (4 Years, Bachelor of Technology) 4102 Agricultural and Food Engineering (4 Years, Bachelor of Technology) 4103 Biological Sciences and Bioengineering (4 Years, Bachelor of Technology)
ELECTRONICS AND COMMUNICATIONS ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis)
ELECTRONICS AND COMMUNICATIONS ENGINEERING GRADUTE PROGRAM FOR MASTER S DEGREE (With Thesis) PREPARATORY PROGRAM* CEE 201 Electrical Circuits 3+0 4 6 CEE 202 Introduction to Control Systems 2+2 3 5 CEE
DEPARTMENT OF MECHANICAL ENGINEERING 170 DODGE HALL (248) 370-2210
466 SCHOOL OF ENGINEERING AND COMPUTER SCIENCE DEPARTMENT OF MECHANICAL ENGINEERING 170 DODGE HALL (248) 370-2210 Chairperson: Gary C. Barber Professors emeriti: Robert Edgerton, Michael Y.Y. Hung, Gilbert
Undergraduate Biomedical Engineering Curriculum University of North Carolina at Chapel Hill, 2014-2015
Undergraduate Biomedical Engineering Curriculum University of North Carolina at Chapel Hill, 2014-2015 First two years Fall: BMME 101 Frontiers of Biomedical Engineering (strongly recommended but not required;