Work Assist. Section 5. Contents. Work Assist Accessories 5.02 Application Chart

Transcription

1 Section 5 Contents Accessories 5.02 Application Chart Accessories 5.03 RAM Mounts 5.07 Fork Level Indicator 5.11 Forklift Laser Guidance System 5.11 Forklift Covers & Enclosures 5.12 New Items: Work Assist Pole - p Fan Kits - p Storage Tray - p Laptop Holder - p Accu-Tilt - p Hard Wired Laser - p Forklift Enclosure - p Note: (q)(5) (1998) of the Occupational Safety and Health Act (OSHA) requires that All parts of any such industrial truck requiring replacement shall be replaced only by parts equivalent as to safety with those used in the original design.

2 Accessories Accessories Application Chart Work Assist Accessories Accessory Clamp & Mounting Plate (RF) Adjustable Mounting Arm System Clamp, Accessory Clip Pad Clip Pad & Hook Clip Pad, Desktop Cup Holder Fan Fire Extinguisher Hook Hook, Utility Light Console Area Light, Dome Light, Flashing Light, Strobe Light, Work Mirror, Rear View Pocket Shrink Wrap Holder Shrink Wrap Tray Storage Module - Battery Cover Mount Storage Module - Magnetic Mount Storage Net Behind Seat Storage Tray, Upper or Lower Terminal Mounting Plate (RF) Tube Tube, Extended C-5 FC4000/4500 PC4500 PE4000/4500 PR4500 PW3500 RC5500 RR/RD5000/5200/5700, RM/RMD6000 SC4000/4500/5200 SH5500/SHR5500 SP3000/3200/3400/ 3500/4000 SR ST3000 SX3000 TR4500 TSP6000/6500/7000 WAVE WP Crown One Source

3 Accessories Tubes Description Model Accessory Rail Kit LH or RH SP 3000 Series Work Assist Pole PC Standard Work Assist Tube Kit PE 4000 Series Works Assist Tube Extension Kit PE/PR 4000 Series Standard Work Assist Tube Kit; PR 4500 Note: Electrical kit is P.N Right Tube Assembly Kit RR/RD 5000/S Series Description Model Work Assist Tube Kit RR/RD 5000/S Series TT Mast ST/SX TL Mast ST/SX " Work Assist Tube Kit RC " Work Assist Tube Kit RC Work Assist Tube Kit SR5200 Note: Plug for tubes is P.N Clamp Used on C5 Pneumatic, 45º angle Used on C5 Pneumatic, in line w/truck mtg Interface with RAM Mounting System Clamp P.N. Arm P.N. Mounting XXX xxx Plate Optional Accessory The new Crown Ball Mount design (P.N XXX) allows you to add the RAM mounting system to the Crown Work Assist clamps and accessories. The addition of the RAM mounting system allows you to position your accessories for the best access and prevent damage due to shock and vibration. See RAM mount pages Terminal Mounting Plates , -002 & Description Model Mounting Bracket RR/RD 5000/S Series LXE Mounting Bracket RR/RD 5000/S Series Norand Mounting Bracket RR/RD 5000/S Series Telxon Adjustable Bar & RR/RD 5000/S Series Mounting Bracket # Mounting Plate FC4000 Series, SC4000/5000 Series, SP3000/4000 Series, PE/PR4000 Series, RR/RD5000 Series, C5, TSP6000 /7000 Series #-Works with Crown RAM; includes clamps; needs hardware Description Model # Universal Mounting Plate C5 Cushion, FC4000 Series, SC4000 Series, RC3000/RC5500, RM/RMD6000/S, SP3000 Series, PE/PR4000 Series, RR/ RD5000/S Series/ TSP6000/7000 Series # Mounting Bracket C5 Cushion, FC4000 Series, SC4000 Series, RC3000/RC5500, RM/RMD6000/S, SP3000 Series, PE/PR4000 Series, RR/ RD5000/S Series, TSP6000/7000 Series # Universal Terminal Mounting Kit Bracket Data Log ESR 4500/5000 C5 Cushion, FC4000 Series, SC4000 Series, RC3000/RC5500, RM/RMD6000/S, SP3000 Series, PE/PR4000 Series, RR/ RD5000/S Series/ TSP6000/7000 Series Note: Optional recommended ball mount size: 2.25" - P.N Work Assist 5.03

4 Accessories Clip Pad Includes clamp Used on SH/SHR Used on WP 3000 Note: Optional recommended ball mount size: 2.25" - P.N Clip Pad, Clamp-On Used on PC 4500, E-Steer. Note: Optional recommended ball mount size: 2.25" - P.N Clip Pad and Hook Includes clamp No clamp; includes plate to use on SH/SHR 5500 Note: Optional recommended ball mount size: 2.25" - P.N Hook For use with RF, includes clamp Does not include clamp, includes plate used on SH/SHR 5500 Note: Optional recommended ball mount size: 1.5" - P.N Note: Optional recommended ball mount size: 1" - P.N Pocket Gray; includes clamp Gray; used on Wave; 1 pocket kit Gray; used on Wave; 2 pocket kit Gray; used on SH/SHR 5500 kit Orange; used on WP Gray pocket only Orange pocket only Fire Extinguisher Kit Includes fi re extinguisher. Used on SC 4000/5000 Series, FC 4000 Series, C5 & RC 5500 Cup Holder, Clamp-On Used on PC 4500 E-Steer, FC 4000 Series, SC 4000 & 5000 Series, C5 Note: Optional recommended ball mount size: 1.5" - P.N Adjustable Arm System Kit Note: Used on TSP 6000/7000 & SR Shrink Wrap Holder Kit - Mounts on Pole Model PC S SC 5200 Note: Optional recommended ball mount size: 2.25" - P.N (PE 4000) (RC 5500) Fan Kits Type Model V PE V PE 4500, PR V ST/SX 3000 (Mounted on work platform) V SH/SHR V FC 4000 Series, SC 4000 Series V RC V RM/RD 6000/S V, w/drive Thru Overhead Guard FC 4000, SC 4000 Series V, w/drive Thru FC 4000 Series Overhead Guard V FC 4000 Series Note: Optional recommended ball mount size: 1.5" - P.N Fan Only Type Model V with switch C V with switch PE 4000 Series, ST/SX 3000, RR V with switch RC V without switch PE 4000 Series V with switch SC 4000 Series, FC 4000 Series, RR V without switch FC 4000 Series, SC 4000 Series, RC V with switch FC 4000, TSP V without switch FC 4000 Series, TSP 6000 Fan & Worklight Kit V without switch PE 4500AC, PR Crown One Source

5 Accessories Dome Light Used on RM/RMD 6000/S, RC Will also need to order plate , 2 of , 2 of , 2 of , 2 of and clamp Cup Holder, Bolt-On Used on PC 4500, E-Steer. Shrink Wrap Holder, Bolt-On Used on PC 4500, E-Steer Fire Extinguisher Kit - Drive Thru Rack Includes fi re extinguisher. Used on FC 4000 Series & SC 4000/5000 Series Storage Module - Battery Cover Mount Mounts to bolt-on load backrest Mounts to hinged load backrest Storage Tray Clip Pad, Bolt-On Used on PC 4500, E-Steer. Storage Module - Battery Cover Mount Tray only Used on trucks with no load backrest; includes one long bracket Used on trucks with no load backrest; includes two side brackets Used on trucks with Flex Seat - FC 4000 series, SC 4000 series Used on trucks with Suspension Seat - FC 4500, SC 4500, SC 5200 Storage Tray Upper & Lower Kits S Upper Storage Tray S Lower Storage Tray Storage Module, Magnetic Mount S Includes tray, magnet and hardware. Can put two together and put on pallet truck battery cover. Used on PC 4500, TR Replacement Magnet Note: U-clamps only, Clip Pad, Desktop Housing Spring Screw (qty. 2) Used on RC 5500 Shrink Wrap Tray Used on PE 4000 Series, PW 3500, PR 4500 Utility Hook Note: Includes two hooks and warning labels. Bracket Assembly for Mirror, Rear View Note: Used on TSP 6000/7000, SP 4000 Order Separately - Clamp Screw (Qty.4) - Mirror Mirror Kit Note: Includes left- & right-hand brackets, 2 mirrors, and hardware to mount. Mounts on overhead guard. Used on C5, FC 4000/4500 & SC 4000/45000/5200. Work Assist 5.05

6 Accessories Storage Net Behind Seat S Also order: - 4 inserts screws wall hooks Strobe Light Kit Color Amber Red Blue Flashing Light Kit Programmable Security Lock This keypad offers an enhanced level of security to deter unauthorized or untrained personnel from operating the vehicle. A four digit Personal Identifi cation Number can be assigned for up to 200 operators that use the vehicle. Supervisor can lockout vehicle through keypad and can program keypad to turn vehicle OFF automatically if vehicle is idle for prolonged periods. Power input is 15 amps externally fused, 48 volts maximum. Power output is 10 amps maximum. Operating temperature range is -40 to +85 degrees Celsius. Work Platform Accessories: Work Platform Tray (P.N ) Used on ST/SX (PE 4000) Front Worklight Kits Number Description Model Drive Thru Overhead Guard FC 4000 Series Standard Overhead Guard Mounted FC 4000 Series Drive Thru SC 4000 Overhead Guard Standard Overhead Guard Mounted SC 4000 Series * Mounted on Work Assist Pole PE 4000 Series Mounted on Work Assist Pole PR 4500 & PE Mounted on Work Assist Pole ST/SX 3000 *Does not include mounting brackets Snap-On Platform W x L (in) x x x Used on ST/SX 3000 Remote Number Mast Type Application ST/SX 3000, TL Ground ST/SX 3000, TT Ground ST 3000, TL Mast Platform ST 3000, Sideshift, Platform TL Mast SX 3000, TL Mast Platform ST 3000, TT Mast Platform ST 3000, Sideshift, Platform TT Mast SX 3000, TT Mast Platform Tool Retractor Capacity lbs. ( kg) Extended rope length ft Crown One Source

7 RAM Mounts Protect your electronic devices by using the RAM Mounting System. RAM mounts utilize a patented rubber ball and socket design which isolates and dampens shock and vibration up to 50G of shock. Adjustable positioning features can not be matched by another mounting method. Mounting bases quickly attach and fi t every OEM lift cage or overhead guard made. All backed by a lifetime manufacturer's warranty. Made in USA. 1" Ball Holds up to 2 lbs 1.5" Ball Holds up to 4 lbs 2.25" Ball Holds up to 10 lbs How to Order: = Vehicle Attachment Vehicle Attachments Arm Adapter Holder Assembly Crown Ball Base Rubber ball connected to oval base with mounting holes aligned to work with Crown Accessories. See pages 5.03 & No. Description " ball with 2.52" x 1.85" oval base " ball with 2.52" x 1.85" oval base " ball with 2.52" x 1.85" oval base 2.5" Diameter Magnetic Base Has pre-drilled holes, including the AMP's hole pattern. The magnetic base contains 3 rare earth magnets that hold fi rm to ferrous metals. The adapter designed to conceal the magnets is made of a durable plastic composite to prevent scratching the mounting surface. Description " ball Round Base with Rubber Ball Consists of a rubber ball connected to a fl at round base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Description " ball with " diameter base " ball with 2 1 2" diameter base " ball with " diameter base " ball with " diameter base, reinforced steel V Base Ball and Straps Fits circular and square rails from 1" to a max of 2.1" diameter. To mount, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a fi rm hold on the rail. Description " ball " ball 3.25" Diameter Suction Cup Suction cup designed to have an extra hold on any smooth, non-porous surface. For best results mount the suction cup on glass or non-porous plastic surface. Description " ball Diamond Drill Down Base with Rubber Ball Consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has 2 holes 1.912" from center to center, matches the industry standard AMP's hole pattern and will connect to a large variety of RAM mount and third party cradles. Description " ball Work Assist 5.07

8 Vehicle Attachments Rubber Ball with Clamp Base - 4" Fits on square rails up to 4" wide and 2 1 8" deep. Can fi t much smaller rails if needed by angling. Description " ball " ball " ball Rubber Ball with Clamp Base - 2.5" Fits on square rails up to 2.5" wide. Description " ball " ball Measure upright support as shown in image. Select clamp base which most closely matches the widest dimension. Overhead Guard Mount The Overhead Guard Mount is the ideal way to get a ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Two popular ball sizes: 1.5" & 2.25" diameter may be attached to the same plate for multiple applications. Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Requires a square base: 1.5" ball (P.N ) or 2.25" ball (P.N or P.N ) Arms Double Ball Socket Arm, Short The short double socket arm, has a socket at both ends that fi ts ball bases. RAM socket technology allows for almost infi nite adjustment and perfect viewing angles. Works With Overall Length " ball 2.38" " ball 3.5" " ball " Double Ball Socket Arm, Standard Has socket at both ends that fi ts ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. Allows for almost infi nite adjustment and perfect viewing angles. Works With Overall Length " ball 3.69" " ball 5.625" " ball 8.375" Double Ball Socket Arm, Long Has a socket at both ends that fi ts ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infi nite adjustment and perfect viewing angles. Works With Overall Length " ball 6" " ball 9.125" " ball " Adjustable Socket with Octagon Socket Consists of double 1" diameter open ball sockets with a 360 rotation point at the center & a connecting swivel joint that rotates forward and back 180. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fi t. Works With Overall Length " ball 6.25" 5.08 Crown One Source

9 Adapters Round Base with Rubber Ball Consists of a rubber ball connected to a fl at round base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Description " ball with " diameter base " ball with 2 1 2" diameter base " ball with " diameter base " ball with " diameter base, reinforced steel Square Base with Rubber Ball Rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Description " ball " ball " ball (reinforced steel) Square Base with Rubber Ball Rubber ball, connected to a 3.625" square plate with a 75x75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Description " ball " ball Diamond Drill Down Base with Rubber Ball Consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has 2 holes 1.912" from center to center, matches the industry standard AMP's hole pattern and will connect to a large variety of RAM mount and third party cradles. Description " ball Holders X-Grip Universal Holder Has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. Dimensions: width " ", depth 0.875". No ball base adapter required. Description " ball X-Grip Universal for 5" Phablets Has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. Compatible and interchangeable with a wide range of mounts. Dimensions: width 1.75"-4.5". No ball base adapter required. Description " ball Tough-Claw with X-Grip Holder Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four-leg design that sports great holding power without hiding your smartphone behind foam pads and plastic Power-Grip Universal Scanner Gun Cradle Compatible with a wide range of ruggedized 2D barcode scanners. Accommodates pistol grip scanner guns with a maximum pistol grip of 1.4". Internal dimensions 3.47" x 2.16" x 4.9". Requires ball adapter Universal Finger-Grip Phone/Radio Holder Designed to hold a large amount of cell phones & electronic devices comes with 3 sets of 4 fl exible rubber coated fi ngers placed along sides to grip your device. Fingers open by squeezing ends to open small fi nger arms. Bottom of the holder includes back plate that adds support to the device being held by the mount. Spine plate contains universal AMPs and 1.5" x 2" hole patterns. Min/Max with top & bottom plates: Height 5.25" to 6". Plates can be removed for larger devices. Requires ball base adapter RAM-X-Grip III Universal Clamping Cradle for 10" Tablets Spring loaded holder for large tablets, with or without a case. Accommodates netbooks as well. Dimensions: Tray Depth Tray Thickness Tray Width (Expansion) Side Clamp Arm Height 6.0" 1.0" 8.56" " 2.75" max No ball base adapter required Universal Holder for Scanner Guns and Handheld Computers Specially designed cradle that will hold most types of gun scanner handles. On the side of the cradle is a spring loaded lever that will securely hold the gun scanner in the cradle. Designed for pistol grip scanners. Requires ball base adapter Tab-Tite Kit for Large Tablets Fits most 10" tablets. Includes 2 sets of interchangeable cups to give the user a custom fi t. Spring loaded. Cradle dimensions: Height Max. Width Max. Edge Depth 8.50" " 7.75" 0.56" 8.75" " 8.25" 1.10" Requires ball base adapter Work Assist 5.09

10 Holders Holders Tab-Lock Kit for Large Tablets Same as except locks for theft deterrent. Cradle dimensions: Height Max. Width Max. Edge Depth 8.00" " 6.80" 0.50" 8.25" " 7.75" 0.56" Requires ball base adapter Tab-Tite Kit for Small Tablets Fits most 7-8" tablets. Includes 3 sets of interchangeable cups to give the user a custom fi t. Spring loaded retention to hold device securely on the forklift. It is compatible with the following tablets with or without skins, sleeves or cases: Archos 7, Asus EEE Pad Memo, Asus Tough-ETBW11AA, Barnes & Nobel NOOKcolor, BlackBerry Playbook, Dell Streak 7, HTC Flyer, Google Nexus 7, Samsung Galaxy. Cradle is compatible with any tablet that will fi t the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle dimensions: Height Max. Width Max. Edge Depth 6.80" " 5.31" 0.125" " 7.00" " 4.70" 0.125" " 7.30" " 5.31" 1.06" Requires ball base adapter Features: 1. Support cups contain open slots to fi t tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Universal X-Grip II Tablet Holder with 1.5" Ball for Small Tablets Four leg design has great holding power and does not hide your tablet behind foam pads or plastic. Spring loaded holder and 1.5" rubber ball connect to the back of the base. Includes extra easy access grip knobs located on the back of the holder for quick release of your tablet. This holder expands and contracts for perfect fi t of most 7" tablets. Min. Width Max. Width Depth 2.25" 5.75" 0.875" Note: Devices 2.25" in width must be a minimum of 7" in height to fi t. No ball base adapter required. Universal Laptop Mount Tough Tray II Spring loaded holder for large tablets, with or without a case. Accommodates netbooks as well. Dimensions: Tray Tray Tray Width Side Clamp Depth Thickness (Expansion) Arm Height 6.0" 1.0" 8.56" " 2.75" max Requires ball base adapter Universal Laptop Tough Tray Holder with Flat Retaining Arm Spring loaded expandable tray that accommodates 10 to 16 inch wide laptops. Includes four fl at side clamping arms that allow your laptop to close completely while in the tray. These arms can be moved both vertically and horizontally allowing for a custom fi t for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics. Tray Tray Depth Thickness Side Clamp Arm Height 10.0" 2.125" 0.5" to 1.75" Tab-Lock Kit for Small Tablets Same as except locks for theft deterrent. Cradle dimensions: Height Max. Width Max. Edge Depth 6.55" " 5.31" 0.125" " 6.75" " 4.70" 0.125" " 7.05" " 5.31" 1.06" Requires ball base adapter Locking Knob - Locks the Arms Includes a brass thread for 1" or 1.5" socket arms, thus allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Thread Size Works With " - 20 thread 1" ball arm " - 18 thread 1.5" ball arm Mount Assembly Universal Mount with 2 Round Bases Consists of one double socket arm and two round bases that contain the universal AMP's hole pattern. Has adjustment points at both ends of the double socket arm; this allows for almost infi nite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all ipad cradles. Ball Base Double Socket Arm Overall Height Ball Size " 1" " 1.5" 5.10 Crown One Source

11 Fork Level Indicator Accu-Tilt Accu-Tilt is a Fork Tilt Level Indicator that is made for all makes and models of lift trucks. The Accu-Tilt shows the operator the level of the forks at all times thereby reducing potential damage by piercing product or racking and increasing productivity by eliminating the guess work. Additionally, the Accu-Tilt s Fork Tilt Level Indicator will also indicate to the operator the correct fork angle to travel with a load as well as parking the lift truck. Forklift Laser Guidance System The Forklift Laser Guidance System provides operators a continuous visual reference of fork position which aids in increasing safety, accuracy, and productivity, while reducing product damage. The laser projects a line or dot onto the pallet or product indicating the level of the forks which allows operator heightened visibility and more accurate fork placement. Laser Models: Basic Standard - Basic standard Cold Storage - Designed for low-temperature and high-moisture environments Height Control - Designed only to operate at 7' and above Laser Types: Line - Best for low-light areas such as warehouses Dot - Best for cold storage and outdoor usage Features: Contains two rechargable nickel metal hydride batteries Charger included Shuts off after 4 mins without movement, saving battery life Automated vibration controlled start INSTALL IN LESS THAN 5 MINUTES Heavy duty Self contained Quick battery change Mounting: Single laser, dual laser, and hard wired series units mount directly to the forklift carriage in less than fi ve minutes. Fork mount laser units attach to the fork directly. Batteries: 50+ continuous hours of life per battery Quick charge 3 hours; full charge in 8 hours Batteries are double shrink wrapped for durability Forklift Laser Guidance Systems Laser Series Power Source Laser Type Description Water Resistant Seal Cold Storage Height Control Single Battery Dot D Basic Std Single Battery Dot D Cold Storage - Water Resistant Single Battery Dot D Height Control Single Battery Dot D Basic Std - Fork Mount Single Battery Dot D Cold Storage - Water Resistant - Fork Mount Single Battery Dot D Height Control - Fork Mount Single Battery Dot D Height Control - Cold Storage - Water Resistant Single Battery Line Basic Std Single Battery Line Water Resistant Single Battery Line Height Control Single Battery Line Basic Std - Fork Mount Single Battery Line Water Resistant - Fork Mount Single Battery Line Height Control - Fork Mount Single Battery Line Height Control - Water Resistant Single Hard Wired Dot D Basic Std Single Hard Wired Dot D Cold Storage - Water Resistant Single Hard Wired Dot D Height Control Single Hard Wired Dot D Height Control - Cold Storage - Water Resistant Single Hard Wired Line Basic Std Single Hard Wired Line Water Resistant Single Hard Wired Line Height Control Single Hard Wired Line Height Control - Water Resistant Dual Battery Line & Dot Basic Std Dual Battery Dot & Dot Cold Storage - Water Resistant Dual Battery Line & Dot Height Control Dual Battery Dot & Dot Height Control - Cold Storage - Water Resistant Dual Hard Wired Line & Dot Hard Wired - Basic Std Dual Hard Wired Dot & Dot Hard Wired - Cold Storage - Water Resistant Dual Hard Wired Line & Dot Hard Wired - Height Control Fork Mount Work Assist 5.11

12 Forklift Laser Guidance System Single Laser Series Number Description Laser Type Basic Std Line D Basic Std Dot Water Resistant Line D Cold Storage - Water Resistant Dot Height Control Line D Height Control Dot Height Control - Water Resistant Line D Height Control - Cold Storage - Water Resistant Dot Fork Mount Laser Series Number Description Laser Type Basic Std Line D Basic Std Dot Water Resistant Line D Cold Storage - Water Resistant Dot Height Control Line D Height Control Dot Fork mount lasers are designed for the non-standard fork carriages. Lasers are mounted directly to the fork of the lift truck. Dual Laser Series Number Description Laser Type Basic Std Dot & Line Cold Storage - Water Resistant Dot & Dot Height Control Dot & Line Height Control - Cold Storage - Dot & Dot Water Resistant Hard Wired - Basic Std Dot & Line Hard Wired - Cold Storage - Water Resistant Dot & Dot Hard Wired - Height Control Dot & Line The dual laser feature is designed for repetitive moving of product. This feature incorporates two distinct lasers to aid the operator. The fi rst laser directs the forks into the pallet and the second laser guides the pallet onto the rack. Accessories Description Rechargable NIMH Batteries Solid-State Charger Face Plate Assembly Power Plug Adapter (works in Australia, China & New Zealand) Hard Wired Laser Series Number Description Laser Type Basic Std Line Basic Std - Orange; includes cable and deutsch connector Line D Basic Std Dot Water Resistant Line Water Resistant - Orange; includes cable and deutsch Line connector D Cold Storage - Water Resistant Dot Height Control Line D Height Control Dot Height Control - Water Resistant Line D Height Control - Cold Storage - Water Resistant Dot Oil and water resistant wires are hard wired directly into truck battery with voltage systems between DC. Matching pigtails are provided for power connection. (Wiring for mast not included.) Experienced personnel are recommended for self-installation. Forklift Covers & Enclosures Forklift Enclosures - Atrium Number Description Size Standard - Super Clear Vinyl Fits up to 6,000 lbs Large - Super Clear Vinyl Fits 6,000-12,000 lbs XL - Super Clear Vinyl 12,000 lbs+ Great for the yard and warehouse. Keeps the rain or dust away from the operator. Zippered doors can be shut or unzipped and folded back into place while working. Universal for most lifts. UV yellow inhibitor. Freeze point fl exibility. Marine grade stitching. Attaches in seconds. Super clear material. Forklift Storage Cover Number Description Size Forklift Storage Cover Fits up to 8,000 lbs 100"L x 45"W x 80"H This is manufactured from the most durable fabrics and is great for the yard or warehouse, keeping your lift s resale value high. Slips on in seconds. Get a better resale value. Easy access zipper. Strong, durable non-rip fabric. Anti-loft/anti-moisture vents. Sizing straps for secure fi t. Strong elastic bottom hem. Forklift Cap Covers Number Description Size Super Clear Tinted Vinyl 52.5" L x 46" W Super Clear Vinyl 40" L x 45.5" W Attaches with built-in bungee cords; just wrap around roof poles and attach back to itself. Attaches in seconds. Fits all lifts. Super clear material. Absorbs impacts. Protection from sun (tinted version only). Protection from rain and falling debris. Great for all warehouses and yards. ATTACHES IN SECONDS, FITS ALL LIFTS 5.12 Crown One Source

13 PROTECT YOUR OPERATOR WITH CROWN S DURABLE SOFT CABIN Work Assist st MAXIMUM FLEXIBILITY AND VALUE IN ANY APPLICATION You need to keep your product moving in unpredictable weather conditions. Rely on Crown s C-5 Series with soft cabin to protect your operators because when operators are comfortable, productivity increases. Crown s C-5 Series with soft cabin protects your largest investment your operators during changing weather conditions without compromising visibility and safety. Work Assist 5.13

14 KEEP YOUR PRODUCT MOVING WITH C-5 SERIES SOFT CABIN Our modular soft cabin construction enables you to select a customized solution with the following features... Safety glass windshield with wiper and washer Acrylic top Soft side zipper style doors and rear window can be rolled up or down as weather conditions change These options are available when you purchase a new truck or as an aftermarket add-on. Safety glass windshield with wiper and washer kit Acrylic top kit Soft rear window kit Soft left and right doors kit Entry assist handle kit Harness kit VISIT CROWN.COM Order all kits OR for CALL a full cabin YOUR LOCAL CROWN DEALER FOR MORE DETAILS. PROTECT Y0UR LARGEST INVESTMENT AND KEEP YOUR PRODUCT MOVING WITH CROWN'S C-5 SERIES WITH SOFT CAB. VISIT CROWN.COM OR CALL YOUR LOCAL CROWN DEALER FOR MORE DETAILS Crown One Source