XenMobile Logs Collection Guide

Transcription

1 XenMobile Logs Collection Guide 1

2 Contents Summary... 3 Background... 3 How to Collect Logs from Server Components... 4 Support Bundle Contents... 4 Operations Supported for Server Components... 5 Configurations in App Controller to collect logs via 3rd party tools ios and Android How to Collect Logs for MDX wrapping issues How to Collect Logs from Client Devices ios Devices Worx Home Logs Overriding/Resetting logging level How to Collect Logs on ios Devices using Xcode How to Collect System Logs on ios Devices via Configuration Utility Tool How to Collect Crash Logs on ios Devices Using itunes Sync Using Device Diagnostics How to Collect System Logs on ios Devices (prior to ios 7) Android Devices Worx Home Logs Overriding/Resetting logging level Collecting Logs via Command Line (ADB) Collecting Logs using Eclipse ADT Bundle Windows Phone Collecting Exchange Active Sync Logs from Outlook Web Access (OWA) for Mobile Devices More Information

3 Summary The purpose of this document is to illustrate the log collection process on different XenMobile components. Background Understanding logging helps you to send useful information to technical support when you run into issues using Worx Home and WorxMail. What is logging, and why is it good? Logging is a useful tool for capturing information about an app's usage that helps determine the problem when something doesn't work right or there is a problem with the app. When you contact customer support, they will likely ask you to send them logging information so they can troubleshoot the issue and help you solve the problem. By default, logging data is collected about WorxMail while you use the app, WorxMail keeps a log of what you do when you use the app, such as when you send , change settings, accept meeting invitations, and so on. Do I have to enable logging, or is it already on? For both Worx Home and WorxMail, basic logging is on by default. How do I enable logging? Best Practices If you are working on a reproducible problem, you should first delete the old log files prior to reproducing the issue to capture the logs for the issue accurately. Also, this helps since there is a limited buffer to store the logs and to avoid running into the size limit on attachments which may vary by servers. If the client you are attempting to use to send the logs fails, try a different one. 3

4 How to Collect Logs from Server Components Support Bundle Contents Support bundle from XenMobile servers will be collected and stored in App Controller. All support bundles will be compressed into one file. The support bundles will be cleaned up during logoff, session expiry or during reboot of App Controller. Support bundles are not encrypted. Upload to TaaS (Citrix Insight Services) ᵒ All support bundles will be compressed into one file before upload. ᵒ A manifest file will be created in the compressed XenMobile bundle Support bundles from XenMobile Device Manager, App Controller and NetScaler Gateway servers contain system and deployment details, log files, thread and memory information, installed patches and other diagnostic information. A detailed list of information to be collected is given below. 1. NetScaler Server Support bundle a. NetScaler System information b. NetScaler Gateway logs c. NetScaler Gateway database information d. NetScaler Gateway core information e. NetScaler Trace files 2. AppController Server Support bundle a. Auditlogs with information for customers to get an overall picture of what is happening in the system b. Debugfile with information required for DEV during debugging 3. XenMobile Device Manager Server Support bundle a. Logs i. From C:\Program Files (x86)\citrix\xenmobile Device Manager\tomcat\logs b. Configuration files i. From C:\Program Files (x86)\citrix\xenmobile Device Manager\tomcat\webapps\zdm\WEB- INF\classes 1. Cluster_configuration 2. Ew-Config.properties 4

5 3. Pki.xml 4. Log4j 5. Push_services 6. Oscache ii. From C:\Program Files (x86)\citrix\xenmobile Device Manager\tomcat\conf iii. Server.xml c. Information collected as part of helper.jsp i. Patches ii. Cluster Info iii. Thread Dump iv. Thread Dump V2 v. Push Service Status (if IOS) d. Server details (Windows) i. OS Version ii. number of cores (CPU) iii. Memory iv. Page file settings v. Interfaces settings (speed, ipv4, ipv6 (enabled) vi. Disk space Operations Supported for Server Components App Controller NetScaler Gateway XenMobile Device Manager Generate Support Bundle and download to client Connectivity Checks Generate Support Bundle and upload to TaaS 5

6 1. To access XenMobile Server Support page, open a browser and login to AppController 9.0 admin ControlPoint: SERVER>:4443/ControlPoint/main.html. After successful login, navigate to Support Page by removing main.html and adding Support SERVER>:4443/ControlPoint/Support Click on + to add the Server details NetScaler Gateway: Management IP needs to be provided with root credentials. 2. AppController: ControlPoint IP/URL and administrator credentials need to be provided. 3. XenMobile Device Manager: IP/FQDN of XenMobile Device Manager Server and administrator login credentials need to be provided. Select the operation that needs to be performed. Ensure the Server checkbox is checked. 3. Operation 1: Select the server and choose the operation to Generate support bundles and download to client 4. 6

7 Download and Save all the generated support bundles to client machine which is in one single zip file. 5. For details on the Support Bundle content refer to the Support Bundle Contents section. 6. these logs to Citrix Support Team. Operation 2: Select the server and choose the operation to Perform Connectivity Checks 7. Note: Connectivity checks cannot be performed on App Controller. Please refer to Operations Supported for Server Components section above. 8. 7

8 Operation 3: Generate Support Bundle and upload to Citrix Insight Services Server 9. 8

9 In case if you already have a Service Request Number (SR Number) from the TaaS server for which you want to link these support bundle, check the option Provide Service Request Details 10. Provide the SR details and click on Apply button. Click on Start button on the Support Page to generate Support Bundle

10 Configurations in App Controller to collect logs via 3rd party tools ios and Android To collect logs using the third party tools, the below configuration is required on App Controller. Set the default log output to console in the app details of the app for which you need the logs. Step 1. Login to App Controller Administrator Control Point Select the mobile app for which you want the logs to be sent to console Click on Edit option and navigate to Policies and make changes as shown below: 10

11 How to Collect Logs for MDX wrapping issues To collect logs for troubleshooting issues related to wrapping please refer to MDXToolkit Documentation: CTX How to Collect Logs from Client Devices ios Devices Worx Home Logs Pre-requisites: WorxMail needs to be configured on this device while sending logs using Send using WorxMail option item #4 below. If there are issues sending logs with WorxMail, turn off this setting and use native mail to send the logs. Step Log into Worx Home and tap on the > icon 1. 11

12 In the Support screen, tap the Support icon 2. 12

13 Select the app for which you need assistance

14 Generate and send the logs

15 Enter the address you want to send the attached logs.zip file and tap on Send button 5. When the arrives it should contain two attachments if an MDX app was selected, Worx Home.zip and <AppName>.zip, where <AppName> is the name of the application you selected in previous step. (e.g. - WorxMail app is chosen here). 6. On extracting the above Logs.zip file, there will be a folder containing logs for the MDX app that was chosen above. 15

16 Overriding/Resetting logging level IMPORTANT: 1. Changing the log level to a higher level is advised only to reproduce an issue. 2. Ensure that after the issue has been reproduced, the log level has been reset to the default level. 3. Increasing the log level and not resetting to default level can result in battery drain and/or performance issues. The logging parameters are set for each app via the policy on the App Controller. The default levels should be sufficient for most cases, but if necessary you may temporarily override the logging level. To do so, follow above steps until you reach the Support screen in Worx Home to arrive at the Choose App screen then select the app to gather the logs and perform the following steps: Step 1. On the Create Log screen, tap on the Settings icon at top right corner to change the logging level. 16

17 2. On the Log Settings screen, tap on Level to modify the level settings Note: The default level is 4 17

18 3. On the Select Level page, change the level to 6 or higher 4. Go back to the Log Settings screen by tapping on the back arrow icon 18

19 5. Save the log setting 19

20 6. Reproduce the issue in the application, and then tap the back-button to return to the Choose App screen. 20

21 7. Send the Logs 8. Note: If an MDX app was selected, then following sequence of events occur: i. The selected MDX app gets launched. ii. New log level gets applied to the app. iii. Once new log level is applied, Worx Home app is launched. 21

22 How to Collect Logs on ios Devices using Xcode Step 1. Download Xcode from the Apple App Store on to your Mac 22

23 2. Connect your ios device to your Mac and then open Xcode. Select Window>Organizer. 3. In the Organizer window, click Devices on the top bar to display the devices organizer. 23

24 4. On the left navigation bar, in the ipad section, select Console to view the Console logs. NOTE: The Device Logs pane in the Organizer contains information about app crashes. You might have to unplug your device and plug it again to refresh the crash list. 5. Ensure the logs are cleared first by using Clear option on left corner to capture the issue accurately 24

25 6. Reproduce the issue. Click Save Log As on right hand corner and Save the logs. the logs and attach it from the location where you saved the logs. 25

26 How to Collect System Logs on ios Devices via Configuration Utility Tool Step 1. Download and Install iphone Configuration Utility Tool. This tool is available for Windows and Mac: Note: This tool can be used for both ipad and iphone. 2. Ensure the System Requirements and Supported Languages requirements are met. Run the installer and follow the wizard to complete installation. 26

27 3. After the installation is complete, launch the Configuration Utility tool. 4. Click on your device under Devices section. 5. Then click on Console on the top navigation bar to view the logs. 6. Ensure the logs are cleared first by using Clear option on left corner to capture the issue accurately. Reproduce the issue 27

28 7. Click Save Console As on right hand corner and Save the logs. Attach and the logs. 28

29 How to Collect Crash Logs on ios Devices Using itunes Sync Step 1. Sync your ios device to itunes 2. On the Mac, navigate to Finder>Go >Go to Folder and type in the location as ~/Library/Logs/CrashReporter/MobileDevice/<DEVICE_NAME> where ~ is your Home folder 3. Select all files with the problematic application *.crash, *.plist or *.ips files archive the files and send to Citrix Support for analysis. 29

30 4. To collect the crash logs on your On Windows, navigate to the Run window and type: %userprofile%\appdata\roaming\apple Computer\Logs\CrashReporter\MobileDevice\<DEVICE_NAME> Where the <DEVICE_NAME> is the name of your device. NOTE: AppData folder is hidden by default. 5. Select all files with the problematic application *.crash, *.plist of *.ips files (for ios 7 or newer) archive the files and the files to Citrix Support for further analysis. NOTE: If itunes is not available, you can manually select the content in the crash file on the device following the steps below. 30

31 Using Device Diagnostics Step 1. To collect the crash logs on your ios device, go to Settings > General > About. 2. Tap Diagnostics & Usage Data. 31

32 3. Tap LatestCrash.plist to open the log NOTE: The related Crash logs for Worx Home, WorxMail, Citrix Receiver etc., may also be needed for investigating the issue. 4. Double tap the LatestCrash.plist log, select Select All, and then Copy to copy the log. Note: Select All option is not available on ios 7 or later. 32

33 5. Next, open WorxMail or the native mail client and paste the log by double tapping the message content area. the log by taping on the Send button. NOTE: If the WorxMail is not launching, you can use the native mail client of the device to send the logs. 33

34 How to Collect System Logs on ios Devices (prior to ios 7) Note: The current available version of System Console is not supported with ios 7 or later. Step 1. From the itunes App Store, download the System Console app on to your ios device and then start the app. 34

35 2. Try to reproduce the issue on the Worx app. 35

36 3. In the System Console app, click forward icon (top right corner). Tap Log. NOTE: The related Crash logs for Worx Home, WorxMail, Citrix Receiver etc., may also be needed for investigating the issue. 36

37 4. the log. 37

38 Android Devices Worx Home Logs Pre-requisites: WorxMail needs to be configured on this device while sending logs using Send using WorxMail option item #4 below. If there are issues sending logs with WorxMail, turn off this setting and use native mail to send the logs. NOTE: This is also applicable to Samsung Knox devices. Step 1. Log into Worx Home and tap on the > icon 2. In the Support screen, tap the Support icon under Need Help? 38

39 3. Choose the App for which you want to send the logs. 4. Send logs for the chosen app. 5. Enter the address to whom you want to send the attached logs.zip file and tap on Send button 39

40 6. When the arrives it should contain two attachments if an MDX app was selected, Worx Home.zip and <AppName>.zip, where <AppName> is the name of the application you selected in previous step. (e.g. - WorxMail app is chosen here). 40

41 Overriding/Resetting logging level IMPORTANT: 1. Changing the log level to a higher level is advised only to reproduce an issue. 2. Ensure that after the issue has been reproduced, the log level has been reset to the default level. 3. Increasing the log level and not resetting to default level can result in battery drain and/or performance issues. The logging parameters are set for each app via the policy on the App Controller. The default levels should be sufficient for most cases, but if necessary you may temporarily override the logging level. To do so, follow above steps until you reach the Support screen in Worx Home to arrive at the Choose App screen then select the app to gather the logs and perform the following steps: Step 1. On the Create Log screen, tap on the Settings icon at top right corner to change the logging level. 41

42 2. On the Log Settings screen, tap on Level to modify the level settings Note: The default level is 4 3. On the Select Level page, change the level to 6 or higher 42

43 4. Go back to the Log Settings screen by tapping on the back arrow icon 5. Save the log setting 43

44 6. Reproduce the issue in the application, and then tap the back-button to return to the Choose App screen. 7. Send the Logs 8. Note: If an MDX app was selected, then following sequence of events occur: i. The selected MDX app gets launched. ii. New log level gets applied to the app. iii. Once new log level is applied, Worx Home app is launched. 44

45 Collecting Logs via Command Line (ADB) 1. Install the Android Debug Bridge using 2. Instructions on installing Android Debug Bridge are located here: 3. Run the following commands: adb logcat -c" (This clears the logs.) 4. Reproduce the issue. 5. Then run the following command to capture the logs in a file: adb logcat -d > Name_of_Log_File.txt" To gather VERBOSE logging: adb shell setprop log.tag.worxhome VERBOSE Note: If you cannot see the device or see a message waiting for device please ensure the USB Debugging is enabled on the device. Instructions to achieve this are available in next section step#4 through step#6. 45

46 Collecting Logs using Eclipse ADT Bundle Pre-requisites: Java JDK 7 or later must be installed Step 1. Download and install Eclipse with built-in ADT (Android Development Tools): 2. Install Android USB drivers on the machine for your device if it is a Samsung device. For example: Samsung USB Driver for Windows machine: Windows 3. Browse to the location where ADT bundle was downloaded. Run SDK Manager as Administrator. Ensure that the Google USB Driver is installed. 46

47 4. Enable Unknown sources on the device under Settings > Security > Unknown Sources. 5. Enable USB Debugging on the device under Settings > Developer Options > USB Debugging. 6. Attach your Android device to the machine using USB. Run Eclipse as Administrator. 47

48 7. Get and view the logs using Log Cat (Under Window>Show View>LogCat) 8. Clear the existing logs using the Clear Log option located at the right corner of the window. Reproduce the issue on your device. NOTE: It is important to delete any previous logs since there is a limited buffer to store the logs. 48

49 9. Save the logs to a location on your machine. the logs with the steps to reproduce the problem. 49

50 Windows Phone Pre-requisites: Please ensure that native is configured on the device Step 1. Login to Windows Phone. Then go to Worx Home application. 50

51 2. To gather the logs, tap on the at bottom of the screen to see other options 3. Tap on Support option 51

52 4. Choose the application for which you need to gather the logs 5. Enter the address to whom you want to send the attached WorxHome_SupportBundle.zip file and tap on Send 52

53 6. When the arrives it should contain an attachment for both Worx Home and if an MDX app was selected, WorxH_log and <App log> for the application you selected in previous step. (e.g. - WorxWeb app is chosen here). WorxHome logs: For MDX apps: 53

54 Collecting Exchange Active Sync Logs from Outlook Web Access (OWA) for Mobile Devices Step 1. Log into OWA (Outlook Web Access) using browser. 2. Click on the Options on the top right corner and select See All Options. 3. Select the Phone tab under See All Options screen. A list of all mobile devices are shown that have Exchange Active Sync configured. 54

55 4. Select the Device on which WorxMail is installed and then click on Start Logging. 5. A popup appears. Select Yes 6. Now go back to the device and reproduce the issue. After repro ing the issue, log in to OWA and go to the options screen again. Select the same device and click on Retrieve Log. 55

56 7. An is sent to your inbox with the logs as attachments. 8. the logs. 56

57 More Information For details on XenMobile MDXToolkit Documentation, please refer to CTX For details on XenMobile Server Support FAQ, please refer to CTX For details on collecting logs for 8.6 and 8.7 XenMobile releases, please refer to CTX For details on collecting logs for 8.5 XenMobile release, please refer to CTX