ENGINEERING MATERIALS LABORATORY SECTION

Transcription

1 AGGREGATE Page No. : 1 of 34 DCL CHLORIDE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SULPHATE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SIEVE ANALYSIS OF FINE AND COARSE AGGREGATE (WET) SPECIFIC GRAVITY & WATER ABSORPTION OF FINE AGGREGATE DM BS 812 : 1988 P117 " Appendix C " BS EN : BSEN : 2012 ANNEX C ASTM C128 : FULLY CRUSHED FACES OF AGGREGATE DMS - 7 : 2001(R-07) PARTIALLY CRUSHED FACES OF AGGREGATE DMS - 8 : 2001(R07) TEN PERCENT FINES (DRY) BS 812 : 1990 P111 T7.1 (AD-04:2002) TEN PERCENT FINES (SOAKED) BS 812 :P ELONGATION INDEX OF AGGREGATE BS 812 : 1990 P105 S AGGREGATE CRUSHING VALUE BS 812 : 1990 P110 ( AD-03:2002) SOUNDNESS ASTM C88 : LOS ANGELES ABRASION (SMALL SIZE COARSE AGGREGATE) LOS ANGELES ABRASION (LARGE SIZE COARSE AGGREGATE) PARTICLE DENSITY / WATER ABSORPTION ( COARSE AGGREGATE ) ASTM C131 : ASTM C535 : BS 812 : 1995 P2 T5.3, 5.4 AMD10379/r LIQUID LIMIT BS 1377 : Part 2:1990 : T4.5 AMD 9027 :

2 AGGREGATE Page No. : 2 of 34 DCL DM 61 PLASTIC LIMIT BS 1377 : Part 2:1990 :T5.3 AMD 9027 : PLASTICITY INDEX BS 1377: Part2: 1990: T5.4 AMD 9027 : SAMPLING OF AGGREGATE ASTM D SAND EQUIVALENT OF SOILS & FINE AGGREGATE MATERIAL FINER THAN 75 MICRONS SIEVE BY WASHING ASTM D2419 : ASTM C117 : SIEVE ANALYSIS (DRY) ASTM C136 : CLAY LUMPS & FRIABLE PARTICLES IN AGGREGATE ASTM C142 / C142 M : FLAKINESS INDEX OF AGGREGATE BS 812 : 1989 P105 S SHELL CONTENT OF COARSE AGGREGATE BSEN : SAMPLING OF AGGREGATE ASTM D ORGANIC MATTER CONTENT BS 1377 : P3 (1990)AMD 9028:(1996) ORGANIC IMPURITIES IN FINE AGGREGATE ASTM C40/C40M SIEVE ANALYSIS OF MINERAL FILLER ASTM D546 : PARTICLE DENSITY (FILLER) BS 812 P2:1995 T5.7 AMD 10397: COATING AND STRIPPING TEST ASTM D1664 : 1980 ( R1985 )

3 AGGREGATE Page No. : 3 of 34 DCL DM SPECIFIC GRAVITY & WATER ABSORPTION OF COARSE AGGREGATE MATERIAL FINER THAN mm IN FINE & COARSE AGGREGATE BY WASHING PARTICLE DENSITY / WATER ABSORPTION ( FINE AGGREGATE ) ASTM C 127 : BSEN : 2012 ANNEX C BS 812 : 1995 P2 T SAMPLING OF AGGREGATE BS 812 : 1989 P SIEVE ANALYSIS (DRY) BSEN : 2012 ANNEX C ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY SIEVE ANALYSIS OF FINE AND COARSE AGGREGATE.(WET) LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE BULK DENSITY & VOIDS IN AGGREGATE - RODDING BULK DENSITY & VOIDS IN AGGREGATE - JIGGING BULK DENSITY & VOIDS IN AGGREGATE - LOOSE SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS ph OF SOIL AND SOIL- AGG./LIGHTWEIGHT EXPANDABLE CLAY AGG. BUILDING GLASS-SHADING COEFFICIENT- (OUTSOURCE) TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES BS ISO : ASTM C 136 : CL : BS 8493 : A1 : ASTM C 29 / C 29 M : 2009 CLAUSE ASTM C 29/ C 29 M : 2009, CLAUSE ASTM C 29/ C 29M :2009 CLAUSE ASTM E 1980: AASHTO T (2008) NFRC BS EN :

4 ASPHALT BULK SAMPLE AGGREGATE Page No. : 4 of 34 DCL DM 829 DETERMINATION OF ACID SOLUBLE CHLORIDE SALT IN AGGREGATE BS EN : COMPACTION FRACTION VALUE OF AGGREGATE FLAT & ELONGATED PARTICLES IN COARSE AGGREGATE. UNCOMPACTED VOID CONTENT OF FINE AGGREGATE. BS 8301 :1985 APPENDIX - D ASTM D 4791 METHOD B AASHTO T , METHOD -A SAMPLING OF BITUMINOUS PAVING MIXTURES ASTM D979 : THEORETICAL MAX. SP. GR. & DENSITY (Gmm GENERAL) THEORETICAL MAX. SP. GR. & DENSITY (Gmm SUPPLEMENTAL) EXTRACTION OF BITUMEN FROM BITUMINOUS PAV. MIX.( CENTRIFUGE ) ASTM D2041 : 1991 (AD- 02 : 2002) ASTM D2041 : 1991 (AD-02 : 2002) ASTM D2172 : 1992 MA C SIEVE ANALYSIS OF EXTRACTED AGGREGATE ASTM D ASPHALT CONTENT OF HOT MIX ASPHALT BY THE IGNITION METHOD (WEARING COURSE) ANALYSIS OF MIXTURES BY IGNITION METHOD AND SIEVE ANALYSIS OF EXTRACTED AGGREGATE (WEARING COURSE) ASTM D (METHOD A) ASTM D (METHOD A); ASTM D

5 ASPHALT BULK SAMPLE Page No. : 5 of 34 DCL DM ANALYSIS OF BIT. MIXTURES BY IGNITION METHOD AND SIEVE ANALYSIS OF EXTRACTED AGGREGATE (CUT-OUT W/C) ANALYSIS OF MIXTURES BY IGNITION METHOD AND SIEVE ANALYSIS OF EXTRACTED AGGREGATE (BASE COURSE) ANALYSIS OF BIT. MIXTURES BY IGNITION METHOD AND SIVE ANALYSIS OF EXTRACTED AGGREATE (CUT-OUT B/C) ASTM D (METHOD A); ASTM D ASTM D (METHOD A); ASTM D ASTM D (METHOD A); ASTM D ANALYSIS OF BITUMINOUS PAVING MIXTURES BY CENTRIFUGE & SIEVE ANALYSIS ASTM D2172/2172M-11MTD A CL & ASTM D EFFECT OF WATER ON BIT.-COATED AGG.USING BOILING WATER ASTM D 3625/D 3625M ANALYSIS OF BIT.MIX.BY CENTRIFUGE&S.A.OF EXT.AGG.(AC/BC) ANALYSIS OF BIT.MIXT.BY CENTRIFUGE&S.A OF EXT.AGG.(ACWC-CUT OUT) ANALYSIS OF BIT.MIXT.BY CENTRIFUGE&S.A OF EXT.AGG.(ACBC-CUT OUT) ASTM D 2172/D2172M-11 & ASTM D ASTM D 2172/D2172M-11 & ASTM D ASTM D 2172/D2172M-11 & ASTM D

6 ASPHALT GYRATORY SAMPLE ASPHALT CORE SAMPLE Page No. : 6 of 34 DCL DM 33 SAMPLING OF BITUMINOUS PAVING MIXTURES ASTM D979 : THEORETICAL MAX. SP. GR. & DENSITY (Gmm SUPPLEMENTAL) SPECIMENS THICKNESS / DIAMETER OF COMPACTED BIT.PAVING MIX. ASTM D2041 : 1991 (AD-02 : 2002) ASTM D3549/D3549M BULK SPECIFIC GRAVITY & DENSITY (WAX) ASTM D1188 : 1989 (AD-01 : 2002) BULK SPECIFIC GRAVITY & DENSITY (SSD) ASTM D2726 : VOIDAGE CONTENT DETERMINATION DMS - 9 : RUTTING SUSCEPTIBILITY OF HMA USING THE ASPHALT PAYEMENT ANALYZER AASHTO T , ASTM D DMS 9-01(R-07) ASTM D TEST WITNESSING N/A BULK SPECIFIC GRAVITY & DENSITY (WAX) ASTM D1188 : 1989 (AD-01 : 2002) BULK SPECIFIC GRAVITY & DENSITY (SSD) ASTM D2726 : VOIDAGE CONTENT DETERMINATION DMS - 9 : PREPARATION OF ASPHALT SPECIMENS BY GYRATORY - COMPACTOR. STM FOR INDIRECT TENSILE (IDT) OF BITUMINOUS MIX. AASHTO TP4-00 CLAUSE ASTM D ASTM D DMS (R07) ASTM D RUTTING SUSCEPTIBILITY OF HMA USING THE ASPHALT PAYEMENT ANALYZER DETERMINING RUTTING SUSCEPTIBILITY (WET) OF HMA USING THE APA AASHTO T , ASTM D DMS 9-01(R-07) ASTM D DMS ,ASTM D ,ASTM D ,DMS9-2001(2007)

7 ASPHALT LAB MIX SAMPLE Page No. : 7 of 34 DCL DM STABILITY & FLOW ( RESISTANCE TO PLASTIC FLOW OF BIT.MIX.) THEORETICAL MAX. SP. GR. & DENSITY (Gmm GENERAL) ASTM D1559 : ASTM D2041 : 1991 (AD- 02 : 2002) STABILITY AT DIFFERENT IMMERSION TIMES ASTM D1559 : BULK SPECIFIC GRAVITY & DENSITY (WAX) ASTM D1188 : 1989 (AD-01 : 2002) BULK SPECIFIC GRAVITY & DENSITY (SSD) ASTM D2726 : MARSHALL PREPARATION OF COMPACTED BIT.SPECIMEN (PER BLOW) ASTM D6926 : VOIDAGE CONTENT DETERMINATION DMS - 9 : LOSS ON STABILITY DETERMINATION DMS - 10 : PREPARATION OF ASPHALT SPECIMEN BY GYRATORY COMPACTOR ASPHALT CONTENT OF HOT MIX ASPHALT BY THE IGNITION METHOD (WEARING COURSE) LABORATORY PREPARATION OF BITUMINOUS PAVING MIXTURES ANALYSIS OF COMPACTED PAVING MIXTURES (WAX METHOD) AASHTO TP4: ASTM D (METHOD A) DMS - 5 : 1999 (R-2001) ASTM D ,ASTM D ,DMS9-01(2007),ASTM D ,ASTM D AIR VOIDS AT REFUSAL (WAX) ASTM D1188:1989(DM AD01),DMS-9: AIR VOIDS AT REFUSAL (SSD) ASTM D ; DMS 9-01(R07) : ASTM D ASPHALT CONTENT OF HOT MIX ASPHALT BY IGNITION METHOD (BASE COURSE) ASTM D (METHOD A)

8 ASPHALT MARSHALL SAMPLE ASPHALT LAB MIX SAMPLE Page No. : 8 of 34 DCL DM 565 ANALYSIS OF COMPACTED PAVING MIXTURE ASTM D ; ASTM D ; ASTM D ; DMS 9-01(R07) LOSS OF STABILITY 568 LOSS OF STABILITY WITH VOIDAGE 667 RUTTING SUSCEPTIBILITY OF HMA USING THE ASPHALT PAYEMENT ANALYZER ASTM D ; ASTM D ;ASTM D ; DMS 10-01(R07) ASTM D ; ASTM D ; ASTM D ;DMS9-01(R07);DMS10-01(R07) AASHTO T , ASTM D DMS 9-01(R-07) ASTM D DETERMINING RUTTING SUSCEPTIBILITY (WET) OF HMA USING THE APA DMS ,ASTM D ,ASTM D ,DMS9-2001(2007) TEST WITNESSING N/A STABILITY & FLOW ( RESISTANCE TO PLASTIC FLOW OF BIT.MIX.) SPECIMENS THICKNESS / DIAMETER OF COMPACTED BIT.PAVING MIX. ASTM D1559 : ASTM D3549/D3549M STABILITY AT DIFFERENT IMMERSION TIMES ASTM D1559 : BULK SPECIFIC GRAVITY & DENSITY (WAX) ASTM D1188 : 1989 (AD-01 : 2002) BULK SPECIFIC GRAVITY & DENSITY (SSD) ASTM D2726 : MARSHALL PREPARATION OF COMPACTED BIT.SPECIMEN (PER BLOW) ASTM D6926 : VOIDAGE CONTENT DETERMINATION DMS - 9 :

9 BITUMEN ASPHALT MARSHALL SAMPLE Page No. : 9 of 34 DCL DM 365 LOSS ON STABILITY DETERMINATION DMS - 10 : ANALYSIS OF COMPACTED PAVING MIXTURES (WAX METHOD) ASTM D ,ASTM D ,DMS9-01(2007),ASTM D ,ASTM D ANALYSIS OF COMPACTED PAVING MIXTURE ASTM D ; ASTM D ; ASTM D ; DMS 9-01(R07) LOSS OF STABILITY 568 LOSS OF STABILITY WITH VOIDAGE STM FOR INDIRECT TENSILE (IDT) OF BITUMINOUS MIX. PERCENT AIR VOIDS IN COMPACTED BITUMINOUS PAVING MIXTURES EFFECT OF MOISTURE ON ASPHALT CONCRETE PAVING MIXTURES ASTM D ; ASTM D ;ASTM D ; DMS 10-01(R07) ASTM D ; ASTM D ; ASTM D ;DMS9-01(R07);DMS10-01(R07) ASTM D ASTM D DMS (R07) ASTM D ASTM D 3203/D 3203M ASTM D 4867 / D 4867M PENETRATION OF BITUMINOUS MATERIALS ASTM D5 / D5M SAYBOLT FUROL VISCOSITY OF PETROLEUM PRODUCTS ASTM D88 : 2007 (R2013) FLASH POINT ASTM D92-12 b : CL KINEMATIC VISCOSITY OF ASPHALT ASTM D2170/2170M SPECIFIC GRAVITY & DENSITY OF SEMI - SOLID BITUMINOUS MATERIAL ASTM D70 : SOFTENING POINT OF BITUMEN ASTM D36 / D36 M

10 BITUMEN Page No. : 10 of 34 DCL DM SAYBOLT FUROL VISCOSITY OF EMULSIFIED ASPHALT ASTM D : cl. 7.1 PROC. B VISCOSITY OF ASPHALT BY BROOKFIELD THERMOSEL APPARATUS ASTM D4402/D4402M RHEOLOGICAL PROPERTIES OF ASPHALT BY DYNAMIC SHEAR AASHTO TP WATER VAPOR TRANSMISSION OF INSULATION ASTM E96-00 MATERIALS TENSILE PROPERTIES OF BITUMEN SHEET FOR ROOF WATER PROOFING BS EN P1 : ACCELERATED AGING OF ASPHALT BINDER USING PAV AASHTO PP EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT (RTFO) ASTM D e TENSILE PROPERTIES OF THIN PLASTIC SHEETING ASTM D882: TENSILE - TEAR STRENGTH OF MODIFIED BITUMINOUS SHEET MATERIAL ASTM D5147:2002 CLAUSE TENSILE PROPERTIES OF FLEXIBLE SHEETS FOR BTTU. WATER PROFING MEMBRANE ASTM D4073 :1994 R LOW TEMPERATURE FLEXIBILITY OF MODIFIED BITUMINOUS SHEET MATERIAL ASTM D5147:02a CLAUSE COMPOUND STABILITY OF MODIFIED BITUMINOUS SHEET MATERIAL ASTM D5147:02a CLAUSE UNIFORMITY TEST FOR EMULSIFIED BITUMEN ASTM D , Section RESIDUE BY EVAP,VOLATILE & VOLATILIZATION TEST FOR EMULSIFIED BITUMEN ASTM D Section 8, 9 & DRYING TIME TEST FOR EMULSIFIED BITUMEN ASTM D Section

11 BITUMEN Page No. : 11 of 34 DCL DM 678 BRUSH APPLICATION BEHAVIOR TEST FOR EMULSIFIED BITUMEN ASTM D , Section WET FLOW TEST FOR EMULSIFIED BITUMEN ASTM D Section WET FILM CONTINUITY TEST FOR EMULSIFIED BITUMEN RESISTANCE TO FREEZING TEST ON EMULSIFIED BITUMEN HEAT RESISTANCE TEST FOR EMULSIFIED BITUMENS DIRECT FLAME TEST EMULSIFIED BITUMENS USED AS PROTECTIVE COATING RESISTANCE TO VOLATILIZATION TEST ON EMULSIFIED BITUMEN VOLATILES BY EVAPORATION TEST ON EMULSIFIED BITUMEN RESIDUE BY EVAPORATION TEST ON EMULSIFIED BITUMEN RESISTANCE TO WATER TEST ON EMULSIFIED BITUMENS USED AS PROTECTIVE COATING ASH CONTENT TEST EMULSIFIED BITUMENS USED AS PROTECTIVE COATING SOLUBILITY OF ASPHALT MATERIALS IN TRICHLOROETHYLENE ASTM D Section ASTM D , SECTION ASTM D , SECTION ASTM D SECTION ASTM D SECTION ASTM D , SECTION ASTM D , SECTION ASTM D SECTION ASTM D , SECTION ASTM D DUCTILITY OF BITUMINOUS MATERIALS ASTM D RESIDUE BY EVAPORATION OF EMULSIFIED ASPHALT (TACK COAT) SOLUBILITY OF BITUMINOUS MAT'L IN TRICHLOROETHYLENE(TACK COAT) ASTM D ASTM D

12 BITUMEN Page No. : 12 of 34 DCL DM FLASH POINT OF CUTBACK ASPHALT WITH TAG ASTM D OPEN CUP APPARATUS WATER IN PETROLEUM PTODUCTS AND BITUMINOUS MAT. BY DISTILLATION ASTM D95-05 (R10) DUCTILITY CUTBACK ASPHALTIC PRODUCTS RESIDUE (PRIME COAT) ASTM D SOLUBILITY OF CUTBACK ASPHALTIC PRODUCTS RESIDUE(PRIME COAT)IN ASTM D TRICHLOROETHYLENE PENETRATION TEST ON RESIDUE OF CUTBACK MATERIAL (PRIME COAT) ASTM D5 /D5M SOLUBILITY OF CUTBACK ASPHALTIC PROD. ASTM D RESIDUE(TACK COAT)IN TRICHLOROETHYLENE DUCTILITY OF CUTBACK ASPHALTIC PRODUCTS RESIDUE (TACK COAT) PENETRATION TEST ON RESIDUE OF CUTBACK MATERIAL (TACK COAT) DISTILLATION OF CUTBACK ASPHALTIC (BITUMINOUS) PRODUCTS ASTM D ASTM D 5 /D5M ASTM D DISTILATION OF EMULSIFIED ASPHALT ASTM D VOLATILE ORGANIC COMPOUNDS (VOC) CONTENT BY GCMS (OUTSOURCE) FLEX.OF HOT APPLIED SEALANTS&FILLERS FOR JOINTS&CRACKS FLOW OF HOT APPLIED SEALANTS & FILLERS FOR JOINT & CRACKS US EPA SW 846/8260 B ASTM D CL ASTM D CL

13 BLOCK BITUMEN Page No. : 13 of 34 DCL DM ASPH.COMP. OF HOT APPLIED SEALANTS,FILLERS FOR JOINTS&CRACKS DUCTILITY OF SEALANTS,FILLERS FOR JOINTS & CRACKS SOFTENING POINT OF SEALANTS,FILLERS FOR JOINTS & CRACKS VISC. OF SEALANTS,FILLERS FOR JOINTS&CRACKS AT ELEVATED TEMP. ASTM D CL ASTM D ASTM D36/D36M ASTM D 4402 /D4402M TEST WITNESSING N/A ELASTIC RECOVERY OF BITUMINOUS MATERIALS BY DUCTILOMETER SG.OR DENSITY OF CUTBACK ASPHALTS BY HYDROMETER METHOD ASTM D6084/D6084M ASTM D 3142/D 3142M CONE PENETRATION (NON-IMMERSED) ASTM D CLAUSE ELASTIC RECOVERY OF POLYMER-MODIFIED BINDER BY DUCTILOMETER ASTM D 6084/D 6084 M-13 (DM addendum No.11 ) COMPRESSIVE STRENGTH OF SOLID MASONRY BLOCKS COMPRESSIVE STRENGTH OF HOLLOW MASONRY BLOCKS BS 6073 : 1981 P2 Ap. B AMD BS 6073 : 1981 P2 Ap. B AMD4508 : COMPRESSIVE STRENGTH OF FILLER BLOCKS BS 6073 : 1981 P2 Ap. B AMD DIMENSION OF SOLID MASONRY BLOCKS BS 6073 : 1981 P1 Ap. A AMD

14 BLOCK Page No. : 14 of 34 DCL DM 5 DIMENSION OF HOLLOW MASONARY BLOCKS BS 6073 : 1981 P1 Ap. A AMD DIMENSION OF FILLER BLOCKS BS 6073 : 1981 P1 Ap. A AMD DENSITY OF BLOCKS BS 6073 : 1981 P2 Ap. C AMD CHLORIDE CONTENT OF CONCRETE BLOCKS BS 1881 : 1988 P COMPRESSIVE STRENGTH OF PAVING BLOCKS - BS 6717 : 1993 P1 Anx. A & B NON RECTANGULAR COMPRESSIVE STRENGTH OF PAVING BLOCKS - BS 6717 : 1993 P1 Anx. A & B RECTANGULAR DIMENSION OF PAVING BLOCKS - NON RECTANGULAR BS 6717 : 1993 P1 Anx. A DIMENSION OF PAVING BLOCKS - RECTANGULAR BS 6717 : 1993 P1 Anx. A SAMPLING OF BLOCKS WI-IC WATER ABSORPTION OF PAVING BLOCKS BS 1881 : 1983 P122 AMD WATER ABSORPTION OF PAVING BLOCKS ASTM C a SULPHATE CONTENT INHARDENED CONCRETE BS 1881 P124 : (1988 ) AD- 06 (2002) CHLORIDE CONTENT IN HARDENED CONCRETE BS 1881 P124 : (1988 ) ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS ISO : MOISTURE CONTENT DETERMINATION ASTM C e WATER VAPOR TRANSMISSION OF INSULATION MATERIALS ASTM E

15 BLOCK Page No. : 15 of 34 DCL DM 465 WATER ABSORPTION ASTM C272 : 2001 (Reapproved 2007) BEHAVIOR OF MATERIAL IN A VERTICAL TUBE FURNACE AT 750 C COMPRESSIVE STRENGTH OF BRICK AND STRUCTURAL CLAY TILES WATER ABSORPTION OF BRICK AND STRUCTURAL CLAY TILES ASTM E136 : ASTM C 67-13a cl ASTM C67-13a cl DIMENSION OF MASONRY UNITS BSEN : COMPRESSIVE STRENGTH OF AUTOCLAVED AERATED CONCRETE DRY DENSITY OF AUTOCLAVED AERATED CONCRETE DRYING SHRINKAGE OF AUTOCLAVED AERATED CONCRETE DETERMINATION OF GROSS DRY DENSITY OF MASONRY UNITS DETERMINATION OF COMPRESSIVE STRENGTH OF MASONRY UNIT DETERMINATION OF NET DRY DENSITY OF MASONRY UNITS THERMAL TRANSMISSION PROPERTIES BY HEAT FLOW METER (AAC BLOCK) BS EN 679 : BSEN BSEN BS EN : 2000 CLAUSE BS EN : 2011 ; DMS BS EN : 2000 CLAUSE ASTM C-518 : COMPRESSIVE STRENGTH OF MASONRY PRISM ASTM C COMPRESSIVE STRENGTH OF CONCRETE MASONRY UNIT & RELATED UNIT DIMENSION OF CONCRETE MASONRY UNITS & RELATED UNIT MEASUREMENT OF ABRASION RESISTANCE (WIDE WHEEL TEST) ASTM C140-09a ASTM C140-09a BS EN 1338:2003 (E)-ANNEX G, AMD

16 CEMENT BLOCK Page No. : 16 of 34 DCL DM LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE BS 8493 : A1 : SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS ASTM E 1980: VERIFICATION OF VISUAL ASPECT FOR PAVING BSEN 1338:03 ANNEX-J/DMS-1:P4:11 ANNEX-B BLOCK TEST WITNESSING N/A THERMAL TRANSMISSION PROPERTIES BY ASTM C 177: HOTPLATE APPARATUS STEADY-STATE THERMAL PROP.GUARDED HOT ISO 8302:1991 (E) PLATE APP. DIMENSION OF PAVING BLOCKS- DMS 1 PART 4 :2013 ANNEX A RECTANGULAR COMPRESSIVE STRENGTH OF PAVING BLOCKS- DMS 1 PART 4:2013 ANNEX A.2.1 & B RECTANGULAR DIMENSION OF PAVING BLOCKS - NON DMS 1 PART 4:2013 ANNEX A RECTANGULAR COMPRESSIVE STRENGTH OF PAVING BLOCKS - DMS 1 PART 4:2013 ANNEX A.2.2 & B NON RECTANGULAR DETERMINATION OF WATER ABSORPTION OF DMS 1 PART 4:2013 ANNEX C PAVING BLOCKS. 111 CONSISTENCY OF CEMENT BS EN 196-3:2005 +A1 : 2008 Clause SETTING TIME OF CEMENT BS EN : A1 : 2008 Clause SOUNDNESS OF CEMENT BS EN : A1 : 2008 Clause CHLORIDE CONTENT OF CEMENT BSEN 196 -P2 :

17 CERAMIC TILES CEMENT Page No. : 17 of 34 DCL DM ANALYSIS OF CEMENT BY X-RAY FLUORECENC SPECTROMETRY ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS ISO : BS ISO : MAKING TEST SPECIMENS - PRISMS BS EN : COMPRESSIVE STRENGTH OF CEMENT BS EN : 2005 CLAUSE FLEXURAL STRENGTH OF CEMENT BS EN : 2005 CLAUSE DETERMINATION OF FINENESS OF CEMENT BS EN : COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTARS ASTM C109/C109M DENSITY OF CEMENT BS EN NC: CEMENT TESTING FOR HEAT OF HYDRATION (OUTSOURCE) BS : IGNITABILITY TEST - SINGLE-FLAME SOURCE TEST FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS BS EN ISO : BS EN : WATER ABSORPTION PF CERAMIC TILES BS EN ISO : 1997 CLAUSE MODULUS OF RUPTURE AND BREAKING STRENGTH OF CERAMIC TILES SURFACE SCRATCH HARDNESS ACCORDING TO MOHS SCALE BS EN ISO : BS EN :

18 CERAMIC TILES Page No. : 18 of 34 DCL DM LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS SLIP RESISTANCE OF PEDESTRIAN SURFACES (PENDULUM METHOD) BS 8493 : A1 : ASTM E 1980: BS : 2002+A1: LENGTH & WIDTH OF CERAMIC TILES UAE S GSO ISO : 2007 CLAUSE STRAIGHTNESS OF SIDES OF CERAMIC TILES UAE S GSO ISO :2007 CLAUSE SURFACE QUALITY OF CERAMIC TILES UAE S GSO ISO : 2007 CLAUSE THICKNESS OF CERAMIC TILES UAE S GSO ISO : 2007 CLAUSE SURFACE FLATNESS OF CERAMIC TILES UAE S GSO ISO : 2007 CLAUSE RECTANGULARITY OF CERAMIC TILES UAE S GSO ISO : 2007 CLAUSE RESISTANCE TO THERMAL SHOCK OF CERAMIC TILES CHEMICAL RESISTANCE OF CERAMIC TILES- UNGLAZED TILES CHEMICAL RESISTANCE OF CERAMIC TILES- GLAZED TILES BS EN ISO : BS EN ISO : CLAUSE BS EN ISO : CLAUSE

19 CONCRETE - CUBE Page No. : 19 of 34 DCL DM 117 SAMPLING HARDENED CONCRETE (CORING ON FLOORS) BS 1881 : 1983 P120 AMD NORMAL CURING OF TEST SPECIMEN BS 1881 : 1983 P111 AMD COMPRESSIVE STRENGTH OF CONCRETE CUBES WATER ABSORPTION OF HARDENED CONCRETE BS 1881 : 1983 P116 AMD BS : SULPHATE CONTENT INHARDENED CONCRETE BS 1881 P124 : (1988 ) AD- 06 (2002) CHLORIDE CONTENT IN HARDENED CONCRETE BS 1881 P124 : (1988 ) TYPE OF CEMENT BS 1881 P124 : (1988 ) AD- 06 (2002) ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE IO ASTM C INITIAL SURFACE ABSORPTION OF CONCRETE BS 1881 : P208 : DEPTH OF PENTRATION OF WATER FOR CONCRETE TESTING HARDENED CONCRETE: PART 3 :C/S OF TEST SPECIMEN CONCRETE PETROGRAPHIC ANALYSIS (OUTSOURCE) BS EN : BS EN : ASTMC 856 & APG-SR TEST WITNESSING N/A SAMPLING HARDENED CONCRETE ( CORING ) BS 1881:1983:P 120 AMD 6109: EVALUATION OF CURTAIN WALL TESTING REPORTS (OUTSOURCE) NA

20 CONCRETE - HARDENED CONCRETE - FRESH Page No. : 20 of 34 DCL DM 124 SAMPLING OF FRESH CONCRETE ON SITE BS 1881 : 1983 P101 AMD SLUMP TEST OF FRESH CONCRETE BSEN : MAKING TEST CUBES FROM FRESH CONCRETE BS 1881 : 1983 P108 AMD MAKING TEST CYLINDERS FROM FRESH BS 1881 : 1983 P110 AMD CONCRETE MIXING & SAMPLING FRESH CONCRETE IN THE BS : LAB 379 MAKING TEST SPECIMENS - PRISMS BS EN : BLEEDING OF CONCRETE ASTM C 232 / C 232 M AIR CONTENT OF FRESH CONCRETE - PRESSURE METHOD MAKING AND CURING SPECIMENS FOR STRENGTH TESTS BS EN : BS EN : SAMPLING FRESH CONCRETE BS EN : SAMPLING HARDENED CONCRETE (CORING ON FLOORS) SAMPLING HARDENED CONCRETE ( CORING ON WALLS, COLUMNS ) BS 1881 : 1983 P120 AMD BS 1881 : 1983 P120 AMD NORMAL CURING OF TEST SPECIMEN BS 1881 : 1983 P111 AMD

21 CONCRETE - HARDENED Page No. : 21 of 34 DCL DM 132 SPLITTING TENSILE STRENGTH OF CYLINDRICAL CONCRETE ASTM C496/ C 496 M DENSITY OF HARDENED CONCRETE BS 1881 : 1983 P114 AMD COMPRESSIVE STRENGTH OF CONCRETE CORES WATER ABSORPTION OF HARDENED CONCRETE TRANSVERSE STRENGTH & WATER ABSORPTION FOR TERRAZO TILES BSEN : BS : BS 4131 : 1973 Ap. A & B SAMPLING PRECAST CONCRETE KERBS BS 7263 : 1994 P1 C MEASUREMENT OF DIMENSIONS OF PRECAST CONCRETE KERBS TRANSVERSE STRENGTH OF PRECAST CONCRETE KERBS WATER ABSORPTION OF PRECAST CONCRETE KERBS BS 7263 : 1994 P1 Anx. A BS 7263 : 1994 P1 Anx. B BS 7263 : 1994 P1 Anx. C SULPHATE CONTENT INHARDENED CONCRETE BS 1881 P124 : (1988 ) AD- 06 (2002) CHLORIDE CONTENT IN HARDENED CONCRETE BS 1881 P124 : (1988 ) TYPE OF CEMENT BS 1881 P124 : (1988 ) AD- 06 (2002) ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS ISO :

22 CONCRETE ADDITIVES CONCRETE - HARDENED Page No. : 22 of 34 DCL DM 427 ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE IO ASTM C FLEXURAL STRENGTH OF CONCRETE PRISMS BS EN : PART 5 : WATER VAPOR TRANSMISSION OF INSULATION MATERIALS ASTM E INITIAL SURFACE ABSORPTION OF CONCRETE BS 1881 : P208 : DEPTH OF PENTRATION OF WATER FOR CONCRETE THERMAL TRANSMISSION PROPERTIES BY HEAT FLOW METER (AAC BLOCK) MAKING SPECIMEN FOR THERMAL CONDUCTIVTY LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS CONCRETE PETROGRAPHIC ANALYSIS (OUTSOURCE) BS EN : ASTM C-518 : BS 8493 : A1 : ASTM E 1980: ASTMC 856 & APG-SR SAMPLING HARDENED CONCRETE ( CORING ) BS 1881:1983:P 120 AMD 6109: CONSISTENCY OF CEMENT BS EN 196-3:2005 +A1 : 2008 Clause SETTING TIME OF CEMENT BS EN : A1 : 2008 Clause SOUNDNESS OF CEMENT BS EN : A1 : 2008 Clause

23 CONCRETE ADDITIVES Page No. : 23 of 34 DCL DM 255 CHLORIDE CONTENT OF CEMENT BSEN 196 -P2 : ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS ISO : MAKING TEST SPECIMENS - PRISMS BS EN : COMPRESSIVE STRENGTH OF CEMENT BS EN : 2005 CLAUSE FLEXURAL STRENGTH OF CEMENT BS EN : 2005 CLAUSE DETERMINATION OF FINENESS OF CEMENT BS EN : WATER REQUIREMENT OF FUEL ASH BS 3892 PART1:1997 ANNEX E DENSITY OF CEMENT BS EN NC: MOISTURE CONTENT OF FUEL ASH BS 3892 PART 1:1997 ANNEX C STRENGTH FACTOR OF FUEL ASH BS 3892 PART 1:1997 ANNEX F ACTIVITY INDEX OF FLY ASH BSEN : WATER REQUIRED FOR FLY ASH BSEN : ACCELERATED POZZILANIC STRENGTH ACTIVITY INDEX WITH OPC ASTM C-1240:05 CLAUSE BULK DENSITY OF SILICA FUME ASTM C CLAUSE DENSITY OF SILICA FUMES ASTM C CLAUSE FINESS OF CEMENT BY 45 um SIEVE ASTM - C 430:96 (Re 2003) MOISTURE CONTENT OF SILICA FUMES ASTM C

24 MORTAR CONCRETE ADDITIVES Page No. : 24 of 34 DCL DM 714 FINENESS BY WET SIEVING BSEN : VOLATILE ORGANIC COMPOUNDS (VOC) CONTENT BY GCMS (OUTSOURCE) CHLORIDE CONTENT OF ADMIXTURES( OUT SOURCE ) SPECIFIC GRAVITY OF LIQUID (OUT SOURCE ) US EPA SW 846/8260 B BS EN : ASTM C 494/494M - 10 CLAUSE COLOUR OF ADMIXTURES ( OUT SOURCE ) VISUAL ph OF LIQUID ADMIXTURES ( OUT SOURCE ) BS 1377 :1990 PART 3 CL.9 :AMD.9028: SOLID CONTENT OF ADMIXTURES (OUT SOURCE ) ASTM C SPECIFIC GRAVITY OF LIQUID ADMIXTURE ASTM C 494/C494M-13 CLAUSE ph OF AQUEOUS SOLUTIONS (ADMIXTURE) GSO ISO 4316 : MAKING TEST CUBES FROM FRESH CONCRETE BS 1881 : 1983 P108 AMD COMPRESSIVE STRENGTH OF CONCRETE CUBES ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS 1881 : 1983 P116 AMD BS ISO : MAKING TEST SPECIMENS - PRISMS BS EN : COMPRESSIVE STRENGTH OF CEMENT BS EN : 2005 CLAUSE FLEXURAL STRENGTH OF CEMENT BS EN : 2005 CLAUSE

25 MORTAR Page No. : 25 of 34 DCL DM THERMAL TRANSMISSION PROPERTIES BY HEAT FLOW METER (THERMAL COND) COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTARS THERMAL TRANSMISSION PROPERTIES BY HEAT FLOW METER (AAC BLOCK) ASTM C518 : ASTM C109/C109M ASTM C-518 : FLEXURAL STRENGTH OF HARDENED MORTAR BSEN : COMPRESSIVE STRENGTH OF HARDENED MORTAR BSEN : DRY BULK DENSITY OF HARDENED MORTAR BSEN : WATER ABSORPTION OF HARDENED MORTAR BSEN : FLOW OF HYDRAULIC MORTAR ASTM C ADHESIVE STRENGTH OF MORTER BSEN : IGNITABILITY TEST - SINGLE-FLAME SOURCE TEST FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS BS EN ISO : BS EN : FLUIDITY TEST OF GROUT BSEN-445:2007 CLAUSE FLUID DENSITY TEST OF GROUT BSEN 445:2007 CLAUSE BLEEDING TEST OF GROUT BSEN 445:2007 CLAUSE VOLUME CHANGES TEST OF GROUT BSEN 445:2007 CLAUSE LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE VOLATILE ORGANIC COMPOUNDS (VOC) CONTENT BY GCMS (OUTSOURCE) BS 8493 : A1 : US EPA SW 846/8260 B

26 ROCK MORTAR Page No. : 26 of 34 DCL DM 777 TEST WITNESSING N/A ADHESIVES FOR TILES-TENSILE ADHESION STRENGTH BS EN 1348 : ADHESIVES FOR TILES - OPEN TIME BS EN 1346 : ADHESIVES FOR TILES - DETERMINATION OF SLIP TENSILE ADHESION STRGTH. FOR GROUT& ADHESIVES OF CERAMIC TILES DET.OF SLIP FOR GROUTS AND ADHESIVES OF CERAMIC TILES DET.OF OPEN TIME FOR GROUTS AND ADHESIVE OF CERAMIC TILES SPECIFIC GRAVITY & WATER ABSORPTION OF FINE AGGREGATE BS EN 1308 : BS ISO :2013(E) CLAUSE 3,4.4 & ANNEX A BS ISO ::2013 (E) CLAUSE 3,4.2 ANNEX A BS ISO :2013(E) CLAUSE & ANNEX A ASTM C128 : SOUNDNESS ASTM C88 : LOS ANGELES ABRASION (SMALL SIZE COARSE ASTM C131 : 2006 AGGREGATE) LOS ANGELES ABRASION (LARGE SIZE COARSE ASTM C535 : 2009 AGGREGATE) PARTICLE DENSITY / WATER ABSORPTION ( COARSE AGGREGATE ) BS 812 : 1995 P2 T5.3, 5.4 AMD10379/r SAMPLING HARDENED CONCRETE (CORING ON BS 1881 : 1983 P120 AMD FLOORS) SPECIFIC GRAVITY & WATER ABSORPTION OF COARSE AGGREGATE ASTM C 127 :

27 SOIL IN-SITU TEST PRODUCTS ROCK Page No. : 27 of 34 DCL DM 376 ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY BS ISO : POINT LOAD STRENGTH INDEX OF ROCK ASTM D UNCONFINED COMPRESSIVE STRENGTH OF COHESIVE SOIL USING LOAD FRAME METHOD BS 1377 : PART7 : CL.7.2 : SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS ASTM E 1980: FLEXURAL STRENGTH OF DIMENSION STONE ASTM C880/C880 M WATER ABSORPTION & BULK SPECIFIC GRAVITY OF DIMENSION STONE ASTM C97/C INSITU CBR BS 1377 :PART9: 1990: T 4.3AMD 8264: CONE PENETRATION TEST (PER METER) DIN 4094 : P2 : 1980 & DIN 4094 : P1 : STANDARD PENETRATION TEST (PER METER) BS 1377:Part9 : 1990:T 3.3 AMD 8264: INSITU DENSITY (SMALL POURING CYLINDER) BS 1377 :Part9: 1990:T 2.1 AMD 8264: INSITU DENSITY ( LARGE POURING CYLINDER ) BS1377:P9:cl.2.2:Amd 8264:95(AD-09:2011) SIEVE ANALYSIS (WET) BS 1377 : Part 2 : 1990:T 9.2 : AMD9027: SAMPLING OF SOIL FROM BOREHOLE (BY USING STANDARD PENETRATION EQUIPMENT (PER METER) BS

28 SOIL LABORATORY TEST PRODUCTS Page No. : 28 of 34 DCL DM CHLORIDE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SULPHATE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SPECIFIC GRAVITY & WATER ABSORPTION OF FINE AGGREGATE BS 812 : 1988 P117 " Appendix C " BS EN : ASTM C128 : FULLY CRUSHED FACES OF AGGREGATE DMS - 7 : 2001(R-07) PARTIALLY CRUSHED FACES OF AGGREGATE DMS - 8 : 2001(R07) TEN PERCENT FINES (DRY) BS 812 : 1990 P111 T7.1 (AD-04:2002) ELONGATION INDEX OF AGGREGATE BS 812 : 1990 P105 S AGGREGATE CRUSHING VALUE BS 812 : 1990 P110 ( AD-03:2002) SOUNDNESS ASTM C88 : LOS ANGELES ABRASION (SMALL SIZE COARSE ASTM C131 : 2006 AGGREGATE) LOS ANGELES ABRASION (LARGE SIZE COARSE ASTM C535 : 2009 AGGREGATE) LIQUID LIMIT BS 1377 : Part 2:1990 : T4.5 AMD 9027 : PLASTIC LIMIT BS 1377 : Part 2:1990 :T5.3 AMD 9027 : PLASTICITY INDEX BS 1377: Part2: 1990: T5.4 AMD 9027 : SAND EQUIVALENT OF SOILS & FINE AGGREGATE ASTM D2419 : FLAKINESS INDEX OF AGGREGATE BS 812 : 1989 P105 S SAMPLING OF AGGREGATE ASTM D

29 SOIL LABORATORY TEST PRODUCTS Page No. : 29 of 34 DCL DM 239 CALIFORNIA BEARING RATIO (CBR) BS 1377: Part4:1990: T.7 AMD : LINEAR SHRINKAGE BS 1377 : Part2: 1990: T6.5 AMD 9027: DRY DENSITY / MOISTURE CONTENT RELATIONSHIP (4" MOULD) DRY DENSITY / MOISTURE CONTENT RELATIONSHIP (6" MOULD) BS 1377 : Part4:1990 T.3.5 AMD : BS 1377 : Part4:1990: T. 3.6 AMD : SIEVE ANALYSIS (WET) BS 1377 : Part 2 : 1990:T 9.2 : AMD9027: SIEVE ANALYSIS (DRY) BS 1377:1990 P2 T ORGANIC MATTER CONTENT BS 1377 : P3 (1990)AMD 9028:(1996) ACID SOLUBLE SULPHATE OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) ACID SOLUBLE CHLORIDE OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) WATER SOLUBLE SULPHATE OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) PH VALUE OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) DRY DENSITY / MOISTURE CONTENT RELATIONSHIP (VIBRATING HAMMER) SPECIFIC GRAVITY & WATER ABSORPTION OF COARSE AGGREGATE BS 1377 : Part4: 1990 : T.3.7 AMD : ASTM C 127 : WATER SOLUBLE CHLORIDE OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) CARBONATE CONTENT OF SOIL BS 1377 : P3 (1990)AMD 9028:(1996) ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE SPECTOMETRY CEMENT CONTENT OF CEMENT STABILIZED MATERIALS BS ISO : BS 1924 : PART 2 : CL 5.1 :

30 SOIL LABORATORY TEST PRODUCTS Page No. : 30 of 34 DCL DM DIRECT SHEAR TEST OF SOIL-SAND (SMALL SHEARBOX) DIRECT SHEAR TEST OF SOIL-CLAY (SMALL SHEARBOX) DIRECT SHEAR TEST OF SOIL-SAND (SMALL SHEARBOX) DIRECT SHEAR TEST OF SOIL-CLAY (SMALL SHEARBOX) UNCONFINED COMPRESSIVE STRENGTH OF COHESIVE SOIL USING LOAD FRAME METHOD ASTM D3080: ASTM D3080 : BS 1377 : PART 7 : CL.4 : 1990 (SINGLE STAGE) BS 1377 : PART 7 : CL.4 : 1990 (SINGLE STAGE) BS 1377 : PART7 : CL.7.2 : LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS ph OF SOIL AND SOIL- AGG./LIGHTWEIGHT EXPANDABLE CLAY AGG. BS 8493 : A1 : ASTM E 1980: AASHTO T (2008) DETERMINATION OF MOISTURE CONTENT BS 1377 PART 2:1990 cl 3.2 AMD 9027: PREPARATION OF TEST SPECIMEN OF COMPACTED SOIL BS 1377 PART 1:1990 CL 7.7 AMD 8258:

31 STEEL Page No. : 31 of 34 DCL DM 293 MASS OF ZINC COATING ON STEEL WIRE BS EN & 2 (2009) THICKNESS OF COATING OF GALVANIZED STEEL TENSILE TEST OF HIGH TENSILE STEEL WIRE & STRAND BS EN ISO 1461 : BS 5896:1980 (APPENDIX A5);DMS 031: TENSILE TEST OF CARBON STEEL BARS BS 4449 : REBEND FOR CARBON STEEL BARS BS 4449 : 1997 TEST E MASS OF ZINC COATING OF FERROUS MATERIALS (GRAVIMETRIC METHOD) BS EN ISO 1460 : TENSILE TESTING OF METALIC MATERIALS BSEN LONGITUDINAL TENSILE PROPERTIES OF FIBER DMS REIFORCED POLYMER BAR TENSILE OF STEEL STRAND - UNCOATED SEVEN WIRE ASTM A416/A416M-10 & A1061/A1061M-09;DMS CHEMICAL ANALYSIS OF CARBON & LOW ALLOY STEEL BY OPTICAL EMISSION ASTM E SPECTROMETRY CHEMICAL ANALYSIS OF CARBON & LOW ALLOY STEEL BY OPTICAL EMISSION ASTM E415 : SPECTROMETRY TENSILE TEST OF STEEL FOR THE RIENFORCEMENT OF CONCRETE BS EN ISO : REBEND TEST OF STEEL FOR THE RIENFORCEMENT OF CONCRETE BS EN ISO : 2010 CLAUSE 6 & TENSILE TEST FOR CARBON STEEL BAR FOR CONCRETE ASTM a clause 6 to 14: Annex BEND TEST FOR CARBON STEEL BAR FOR CONCRETE ASTM A a cl 15 & Annex

32 STEEL Page No. : 32 of 34 DCL DM MSMT.OF THE GEOMETRICAL CHAR.& RELATIVE RIB AREA OF STEEL BAR MEASUREMENT OF PROJECTED RIB AREA OF DE FORMED STEEL BAR BS EN ISO : BS 4449 :1997 : ANNEX C TENSILE STRENGTH TEST OF STEEL COUPLER DMS : RIB MEASUREMENT OF DEFORMED STEEL BAR ASTM A615/A615M -13 cl TENSILE TEST OF METALLIC MATERIALS ASTM A a cl 6 to STM FOR BRINELL HARDNESS OF METALLIC ASTM E MATERIALS(OUTSOURCE) CHEMICAL ANALYSIS FOR CAST ANCHOR (OUT CHEM 1001 AUH/OES-ICP SOURCE) CHEMICAL ANALYSIS OF MATERIALS BY ICP- NA OES(OUTSOURCE) 777 TEST WITNESSING N/A DETERMINATION OF EPOXY COATING THICKNESS (OUT SOURCE) PULL-OFF STRENGTH OF COATINGS-PORTABLE TESTERS-OUTSOURCE LOAD TEST ON MANHOLE AND GULLY TOPS (OUTSOURCE) CHEMICAL ANALYSIS OF STAINLESS STEEL BY ATOMIC EMISSION CHEMICAL ANALYSIS OF STAINLESS STEEL BY ATOMIC EMISSION 814 TENSILE TEST OF MULTI-WIRE STEEL STRAND BS EN ISO 2808: ASTM D BS EN 124: ASTM E ASTM E ASTM A 416/A416M-12a, A1061/A1061M-09 & DMS

33 STEEL Page No. : 33 of 34 DCL DM RIB MEAS'NT.OF STEEL FOR THE REINF`NT.OF CONC.RIBBED BARS TENSILE TEST OF STEEL FOR THE REINF`OF CONC.-RIBBED BARS SURFACE BURNING CHAR.OF BLDG.MATLS- HARDNESS TEST(OUTSOURCE) BEND&REBEND TEST OF_STEEL FOR THE REINF`.OF CONC.-RIBBED BARS STANDARD TEST METHOD FOR WEIGHT OF ZINC COATING BS EN ISO :10 CL.10&11&UAE.S.GSO ISO :07 CL.6 BS EN ISO :10 CL.5 & UAE.S.GSO ISO :07 CL ASTM E 84-10e BS EN ISO :10 CL.6&7/ UAE.S.GSO ISO :07 CL9.2& ASTM A 90/90M TENSILE TEST ON ANCHOR BOLT (OUTSOURCE) BS EN ISO : MECH. PROP. OF BOLTS WITH SPECIFIED PROP. CLASSES(OUTSOURSE) BS EN ISO : TENSILE TEST ON ANCHOR BOLT (OUTSOURSE) ASTM A HARDNESS TEST (OUTSOURSE) ASTM E 18-08b DETRMINATION OF COATING DRY FILM THICKNESS (DFT) ROCKWELL HARDNESS TEST(SCALES:A,B,C,D,E,F,G,H,K,N,T) OUTSOURCE BS EN ISO 2808:07 CL MTD. 7C & CL MTD. 7D BSEN ISO :

34 WATER Page No. : 34 of 34 DCL DM 296 CHLORIDE CONTENT IN WATER ASTM D METHOD B PH VALUE OF WATER ASTM D TOTAL DISSOLVED SOLIDS (TDS) OF WATER BS 1377 : P3 (1990)AMD 9028:(1996) SULPHATE CONTENT IN WATER ASTM D CHLORIDE CONTENT OF GROUND WATER BS 1377 : P3 (1990)AMD 9028:(1996) SULPHATE CONTENT OF GROUND WATER BS 1377 : P3 (1990)AMD 9028:(1996) PH OF GROUND WATER BS 1377 : P3 (1990)AMD 9028:(1996) TOTAL AND DISSOLVED CARBON DIOXIDE IN WATER ASTM D TEST METHOD A