1 Mobilisation and demobilisation 1 Deep boring sum 2 Cone penetration tests sum 3 Miscellenous tests sum
|
|
- Alaina Chase
- 8 years ago
- Views:
Transcription
1 Malaysian Civil Engineering Standard Method of Measurement (MyCESMM) CLASS D: SITE INVESTIGATION WORK Measurement covered under other classes: Excavation not carried out for the purpose of soil investigation work (included in Class F: Earthwork ). Mobilisation and boring for piling (included in Class H: Piling Work ). Survey and setting out (included in Class A: General Items ) FIRST DIVISION SECOND DIVISION THIRD DIVISION Unit 1 Mobilisation and demobilisation 1 Deep boring sum 2 Cone penetration tests sum 3 Miscellenous tests sum 2 Deep boring 1 Plant movement 1 Land nr 2 Miscellaneous plant 2 Hillslopes nr 3 Stable platform over water nr 4 Fixed platform nr 5 Swampy ground nr 2 Boring in soil 1 Water m 2 Water with additives m 3 Air/foam m 3 Drilling in rock 1 Water m 2 Air/foam m 3 Reaming casing m 4 Grouting m3 4 Test 1 Standard penetration test nr 2 Vane shear test nr 3 Pressure meter test nr 4 Field permeability test nr 5 Dynamic cone test m 5 Sampling 1 Disturbed samples nr 2 Undisturbed sample using thin wall tube nr 3 sampler Undisturbed sample using mazier nr 4 sampler Undisturbed sample using piston nr sampler 5 Undisturbed sample using Denison nr sampler 6 Water sample nr 6 Miscellaneous 1 Borehole marker nr Page 44
2 Class D : Site Investigation Works MEASUREMENT RULES DEFINITION RULES COVERAGE RULES M1 The depth of boring, drilling, D1 Plant movement is the shifting C1 Items for plant movement A1 of plant or equipment from one shall be deemed to include borehole/test position to the dismantling and erecting from next position. one position to another. sampling. and testing shall be measured from the Commencing Surface as follows: a) Not exceeding 10 m. D2 Hillslopes is an access with C2 Sampling shall be deemed to b) m. c) m. gradient greater than 15 degrees. include transportation and preservation. d) m. A3 e) m. D3 Small disturbed samples is C3 All field explorations and tests f) Stated exceeding 50 m. less than 5 kg. shall be deemed to include daily field records and sample logging. C4 Items for mobilisation and demobilisation shall be deemed to include provision of all plant, equipment and ancillaries transportation to the Site and removal off the Site upon the completion of the operation. A2 ADDITIONAL DESCRIPTION RULES water sample shall state the volume. disturbed sample shall state the weight of samples. block sample shall state the size of sample. C5 C6 C7 Deep boring shall be deemed to include ground water observation. Boring in soil shall be deemed to include provision of casing where necessary. Drilling in rock shall be deemed to include core boxes and become the property of the Employer, unless otherwise stated. A4 A5 boring in soil shall state nominal diameter of boreholes, inclination angle, boxes, type of boring plant, and depth, as per measurement rule M1. testing shall state the type of test, cycles where applicable, nominal diameter, and the depth, as per measurement rule M1. C8 Movement on land, over water A6 water and swamp area shall be deemed to include stable platform sampling shall state the size, type, and depth, as per measurement rule M1. Page 45
3 Malaysian Civil Engineering Standard Method of Measurement (MyCESMM) FIRST DIVISION SECOND DIVISION THIRD DIVISION 3 Cone penetration tests 1 Plant movement 1 Land nr 2 Hillslopes nr 3 Stable platform over water nr 4 Stable platform over swamp area nr 5 Swampy ground nr 2 Test 1 Mechanical cone m 2 Piezocone m 3 Dissipation test nr Unit 3 Miscellaneous 1 Test location marker nr 4 Miscellaneous test 1 Hand auger 1 Augering in soil m 2 Disturbed sample nr 3 Undisturbed samples using thin wall nr tube sampler 4 Water sample nr 2 Trial pit 1 Excavation nr 2 Small disturbed sample nr 3 Bulk sample nr 4 Block sample nr 5 Water sample nr 3 Testing 1 Mackintosh and JKR probe m 2 Vane shear nr 3 Plate bearing nr 4 In situ CBR nr 5 Pocket penetrometer nr 6 Field density nr 4 Sampling 1 Small disturbed sample nr 2 Bulk sample nr 3 Undisturbed samples using thin wall nr tube sampler 4 Block sample nr 5 Water sample nr Page 46
4 Class D : Site Investigation Works MEASUREMENT RULES DEFINITION RULES COVERAGE RULES A7 ADDITIONAL DESCRIPTION RULES cone penetration test shall state the type, capacity of cone, machine capacity, and depth, as per measurement rule M1. A8 dissipation test shall state the maximum hours of test required. D4 Samples taken from location other than borehole, hand auger C8 Miscellaneous tests shall be deemed to include plant A9 or trial pit shall be classed as movements on the Site. sampling. A10 C9 Hand auger shall be deemed to include ground water observation. C10 Trial pit shall be deemed to include lateral support, ground water observation, logging and mapping of site wall, and backfilling, unless otherwise stated. A11 trial pit shall state the dimensions. micellaneous tests shall state the equipment used, setting up where applicable, method, and depth. plate bearing test shall state the required plate size, test load or pressure, and number of cycles. A12 sampling shall state the location (which is other than borehole, hand auger, and trial pit). Page 47
5 Malaysian Civil Engineering Standard Method of Measurement (MyCESMM) FIRST DIVISION SECOND DIVISION THIRD DIVISION 5 Laboratory tests 1 Classification test 1 Moisture content nr 2 Atterberg's limits. set 3 Specific gravity nr 4 Particle size distribution for fine grained nr soils Unit 5 Particle size distribution for coarse nr grained soils 2 Soil strength tests 1 Unconfined compressive strength test set 2 Unconsolidated undrained triaxial set compression test 3 Consolidated undrained triaxial set compression test with pore water pressure measurement 4 Consolidated drained triaxial set compression test with pore water pressure measurement 5 Direct shear box set 6 Multi reversal shear box set 3 Soil compaction related tests 1 Standard compaction (2.5 kg hammer) set 2 Heavy compaction (4.5 kg hammer) set 3 Vibrating hammer set 4 Unsoaked CBR nr 5 Soaked CBR nr 4 Chemical and electro-chemical tests 1 Organic matter content nr 2 Loss on ignition nr 3 Total sulphate content nr 4 Sulphate content nr 5 Chloride content nr 6 ph value nr 7 Resistivity test nr 8 Contaminants nr 5 Rock strength tests 1 Unconfined compressive strength test nr 2 Unconfined compressive strength with nr Young's Modulus and Poisson's ratio measurement test 3 Point load test nr 4 Petrographic examination test nr 6 Compressibility and permeability tests 1 One dimension consolidation nr 2 Variable head permeability nr 3 Fixed head permeability. nr Page 48
6 Class D : Site Investigation Works MEASUREMENT RULES D5 A set, for soil strength tests, C11 Laboratory tests shall be A13 shall be defined as of three deemed to include preparation specimens ; except for of specimens. unconfined unconfined compressive compresssive test test shall be defined as of two C12 CBR test shall be deemed to be specimens carried out on both ends of A14 each specimen, unless otherwise stated. D6 DEFINITION RULES A set, for soil compaction related test, shall be defined as of five specimen tests from the sama bulk sample. the same bulk sample C13 COVERAGE RULES Special preparation for equipment shall be deemed to be provided separately A15 when expressly stated. ADDITIONAL DESCRIPTION RULES laboratory tests shall state the method of testing and the standard requirements. soil strength tests shall state the size of testing specimen and type of soil sample, i.e. undisturbed or remoulded. direct shear box and multi reversal shear box tests shall state the size of the shear box. A16 contaminants shall state the standard requirements, and the contaminants to be analysed. Page 49
7 Malaysian Civil Engineering Standard Method of Measurement (MyCESMM) FIRST DIVISION SECOND DIVISION THIRD DIVISION 6 Instrumentation 1 Piezometer nr 2 Inclinometer nr 3 Settlement 1 Surface marker nr 2 Settlement plate nr 3 Displacement marker nr Unit 4 Magnetic extensometer nr 5 Deep levelling datum nr 6 Monitoring nr 7 Geophysical survey and mapping 1 Seismic refraction survey 1 Setting out sum 2 Installation and readings spread 3 Preparation of bedrock and soil contour sum maps 2 Resistivity profiling 1 Setting out sum 2 Installation and readings spread 3 Preparation of resistivity profiles sum 3 Geological terrain mapping m2 4 Utilities detection and mapping 1 Locate, detect, and map all utilities and services sum 2 Verification with utilities provider sum 3 Conduct site verification sum 8 Report 1 Preliminary report 1 Soil investigation sum 2 Final report 2 Seismic refraction survey sum 3 Resistivity profiling sum 4 Geological terrain mapping sum 5 Utilities detection and mapping sum 6 Instrumentations sum Page 50
8 Class D : Site Investigation Works MEASUREMENT RULES DEFINITION RULES COVERAGE RULES ADDITIONAL DESCRIPTION RULES M3 Measurement of monitoring in C13 Items for piezometer and A17 Item descriptions for number shall be based on the inclinometer shall be deemed piezometer and inclinometer trips to the location of the to include pre-boring and shall state the type, depth, and instrumentation. installation. material used. C14 Items for monitoring shall be deemed to include preparation of monitoring report. A18 settlement plate shall state the dimensions of plate, depth, and material used. A19 monitoring shall state the personnel and number of trips required. M4 Intervals of geophones for D7 A spread of installation and C15 Setting out for seismic A20 seismic refraction survey shall be measured along the slope. M5 M6 Intervals of electrodes for resistivity profiling shall be measured along the slope. Area measured for geological terrain mapping shall be the plan area. D8 D9 readings for seismic refraction survey shall include a 24-channel seismograph with geophones at not more than 5- metre intervals. Resistivity profiling shall be two-dimensional with electrodes at not more than 5- metre intervals. Geological terrain mapping shall be in accordance with guidelines by the Minerals and Geoscience Department Malaysia. refraction survey and resistivity profiling shall be deemed to include survey coordinates, reduced levels, and topographic profile for each set of installation and readings. C16 Items for verification with utilities provider shall be deemed to include purchasing of necessary documents and verification on the utilities detected, as compared with the records of the utilities provider. installation and readings for seismic refraction survey shall state the interval of geophones, number of shots per set, and the type of shots required. A21 installation and readings for resistivity profiling shall state the type of configuration, number, and interval of electrodes required. A22 Item descriptions for seismic refraction survey and geological terrain mapping shall state the location and area of the site to be investigated. A23 geological terrain mapping shall state the requirement in the Minerals and Geoscience Department guidelines. C17 Items for Soil Investigation Report shall be deemed to include laboratory test results. A24 reports shall state the number of sets and the format required. C18 Items for seismic refraction survey and resistivity profiling report shall be deemed to include geological sections and interpretation of data by specialists. Page 51
CIVL451. Soil Exploration and Characterization
CIVL451 Soil Exploration and Characterization 1 Definition The process of determining the layers of natural soil deposits that will underlie a proposed structure and their physical properties is generally
More informationEurocode 7 - Geotechnical design - Part 2 Ground investigation and testing
Brussels, 18-20 February 2008 Dissemination of information workshop 1 Eurocode 7 - Geotechnical design - Part 2 Ground investigation and testing Dr.-Ing. Bernd Schuppener, Federal Waterways Engineering
More informationINDIRECT METHODS SOUNDING OR PENETRATION TESTS. Dr. K. M. Kouzer, Associate Professor in Civil Engineering, GEC Kozhikode
INDIRECT METHODS SOUNDING OR PENETRATION TESTS STANDARD PENETRATION TEST (SPT) Reference can be made to IS 2131 1981 for details on SPT. It is a field edtest to estimate e the penetration e resistance
More informationTECHNICAL NOTE: SI 01 SPECIFIC REQUIREMENTS FOR THE ACCREDITATION OF INSPECTION BODIES FOR SITE INVESTIGATION
ACCREDITATION SCHEME FOR INSPECTION BODIES TECHNICAL NOTE: SI 01 SPECIFIC REQUIREMENTS FOR THE ACCREDITATION OF INSPECTION BODIES FOR SITE INVESTIGATION Technical Note SI 01: 3 February 2016 The SAC Accreditation
More informationSERVICES 2015 ISO 18001
SERVICES 2015 A family business with a solid foundation of experience, we handle all aspects of site investigation.... Phase 1 Environmental Studies Phase 2 Intrusive Investigations Phase 3 Remediation
More informationFINAL REPORT ON SOIL INVESTIGATION
FINAL REPORT ON SOIL INVESTIGATION FOR PROPOSED CONSTRUCTION AT SS-6B AREA AT HPCL VISAKH REFINERY VISAKHAPATNAM ANDHRA PRADESH J.J. ASSOCIATES(VISAKHAPATNAM) AETP(P) LIMITED #11-6-3, RockDale Layout,
More informationSPECIFICATION FOR DYNAMIC CONSOLIDATION / DYNAMIC REPLACEMENT
SPECIFICATION FOR DYNAMIC CONSOLIDATION / DYNAMIC REPLACEMENT 1.0 SOIL IMPROVEMENT 1.1 General Soil Investigation Information are provided in Part B1 annex as a guide to the Contractor for his consideration
More informationc. Borehole Shear Test (BST): BST is performed according to the instructions published by Handy Geotechnical Instruments, Inc.
Design Manual Chapter 6 - Geotechnical 6B - Subsurface Exploration Program 6B-2 Testing A. General Information Several testing methods can be used to measure soil engineering properties. The advantages,
More informationINSITU TESTS! Shear Vanes! Shear Vanes! Shear Vane Test! Sensitive Soils! Insitu testing is used for two reasons:!
In-situ Testing! Insitu Testing! Insitu testing is used for two reasons:! To allow the determination of shear strength or penetration resistance or permeability of soils that would be difficult or impossible
More informationGUIDELINES FOR GEOTECHNICAL INVESTIGATION OF BRIDGE STRUCTURES. Materials Engineering Report No. 2009-8M (Supersedes Report No.
GUIDELINES FOR GEOTECHNICAL INVESTIGATION OF BRIDGE STRUCTURES Materials Engineering Report No. 2009-8M (Supersedes Report No. 21) F CHOWDHURY GEOMECHANICS AND STRUCTURAL MATERIALS ENGINEER S REHMAN GEOTECHNICAL
More informationModule 1 : Site Exploration and Geotechnical Investigation. Lecture 5 : Geophysical Exploration [ Section 5.1 : Methods of Geophysical Exploration ]
Objectives In this section you will learn the following General Overview Different methods of geophysical explorations Electrical resistivity method Seismic refraction method 5 Geophysical exploration
More informationSite Investigation. Some unsung heroes of Civil Engineering. buried right under your feet. 4. Need good knowledge of the soil conditions
This is an attempt to create a stand alone self learning module on site investigation. Fasten your seat belts. Sit back, relax and enjoy. 1 2 Site Investigation Some unsung heroes of Civil Engineering
More informationHIGHWAYS DEPARTMENT GUIDANCE NOTES ON SOIL TEST FOR PAVEMENT DESIGN
HIGHWAYS DEPARTMENT GUIDANCE NOTES ON SOIL TEST FOR PAVEMENT DESIGN Research & Development Division RD/GN/012 August 1990 HIGHWAYS DEPARTMENT GUIDANCE NOTES (RD/GN/012) SOIL TEST FOR PAVEMENT DESIGN Prepared
More informationSITE INVESTIGATION FACILITIES
SITE INVESTIGATION FACILITIES Drilling Hydraulic rotary & calax drilling rigs100/150mm Diameter boreholes having drilling capacity up to 200m depth. Auger drilling 100/150mm diameter boreholes up to maximum
More informationGeotechnical Investigation using Standard Penetration Test (SPT) in Rangamati, Bandarban and Khagrachari Towns
1. Introduction 1.1 Scope of Work The Asian Disaster Preparedness Centre (ADPC) is implementing the project Seismic Hazard and Vulnerability Mapping for Rangamati, Bandarban and Khagrachari Municipality.
More informationWork Type Definition and Submittal Requirements
Work Type: Highway Materials Testing Geotechnical Laboratory Testing, Geotechnical Laboratory Testing, Standard Penetration (SPT) & Rock Coring, Cone Penetration Test, Solid Stem Auger Drilling, and Materials
More informationGeotechnical Measurements and Explorations Prof. Nihar Ranjan Patra Department of Civil Engineering Indian Institute of Technology, Kanpur
Geotechnical Measurements and Explorations Prof. Nihar Ranjan Patra Department of Civil Engineering Indian Institute of Technology, Kanpur Lecture No. # 13 (Refer Slide Time: 00:18) So last class, it was
More informationKWANG SING ENGINEERING PTE LTD
KWANG SING ENGINEERING PTE LTD 1. INTRODUCTION This report represents the soil investigation works at Aljunied Road / Geylang East Central. The objective of the soil investigation is to obtain soil parameters
More informationCone Penetration Test (CPT)
Cone Penetration Test (CPT) The cone penetration test, or CPT in short, is a soil testing method which will provide a great deal of high quality information. In the Cone Penetration Test (CPT), a cone
More informationHow To Design A Foundation
The Islamic university - Gaza Faculty of Engineering Civil Engineering Department CHAPTER (2) SITE INVESTIGATION Instructor : Dr. Jehad Hamad Definition The process of determining the layers of natural
More informationChapter 4 SUBSURFACE INVESTIGATION GUIDELINES
Chapter 4 SUBSURFACE INVESTIGATION GUIDELINES Final SCDOT GEOTECHNICAL DESIGN MANUAL August 2008 Table of Contents Section Page 4.1 Introduction...4-1 4.2 Subsurface Investigation...4-2 4.2.1 Preliminary
More informationAnirudhan I.V. Geotechnical Solutions, Chennai
Anirudhan I.V. Geotechnical Solutions, Chennai Often inadequate In some cases, excess In some cases, disoriented Bad investigation Once in a while good ones Depends on one type of investigation, often
More informationTENDER NO: PSER:SCT:SNG-C1667:15 VOLUME III PRICE SCHEDULE (REV-00)
TENDER NO: PSER:SCT:SNG-C1667:15 VOLUME III PRICE SCHEDULE (REV-00) FOR Topographical Survey and Geo-Technical Investigation of 1 x 600 MW Unit # 03 Singareni Thermal Power Plant at Adilabad, Telengana.
More informationCOMPENDIUM OF INDIAN STANDARDS ON SOIL ENGINEERING PART 2
(PREVIEW) SP 36 (Part 2) : 1988 COMPENDIUM OF INDIAN STANDARDS ON SOIL ENGINEERING PART 2 IS 1893 : 1979 (Reaffirmed 1987) CODE OF PRACTICE FOR SUBSURFACE INVESTIGATION FOR FOUNDATIONS 1.1 This code deals
More informationGUIDELINE FOR HAND HELD SHEAR VANE TEST
GUIDELINE FOR HAND HELD SHEAR VANE TEST NZ GEOTECHNICAL SOCIETY INC August 2001 CONTENTS Page 1.0 Introduction 2 2.0 Background 2 3.0 Recommended Practice 3 4.0 Undrained Shear Strength 3 5.0 Particular
More informationANNEX D1 BASIC CONSIDERATIONS FOR REVIEWING STUDIES IN THE DETAILED RISK ASSESSMENT FOR SAFETY
ANNEX D1 BASIC CONSIDERATIONS FOR REVIEWING STUDIES IN THE DETAILED RISK ASSESSMENT FOR SAFETY ANNEX D1: BASIC CONSIDERATIONS FOR REVIEWING STUDIES IN DRA FOR SAFETY D1-1 ANNEX D1 BASIC CONSIDERATIONS
More informationUsing AGS digital data transfer format D C Entwisle and S Self
Using AGS digital data transfer format D C Entwisle and S Self Synopsis UK Business model What is the AGS? What is AGS digital data transfer format? Using AGS data UK business model Client Consultant Main
More informationPavements should be well drained both during and upon completion of construction. Water should not be allowed to pond on or near pavement surfaces.
Project No. 208-8719 January, 2009 Ref: 2-8719BR Anthony Hudson - Broadscale Geotechnical Investigation - Proposed Commercial Development - 52 Old Pacific Highway, Pimpama Page 32 iii) Pavements should
More informationModule 1 : Site Exploration and Geotechnical Investigation. Lecture 4 : In-situ tests [ Section 4.1: Penetrometer Tests ] Objectives
Lecture 4 : In-situ tests [ Section 4.1: Penetrometer Tests ] Objectives In this section you will learn the following Penetrometer Tests Standard penetration test Static cone penetration test Dynamic cone
More informationINTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING Volume 3, No 3, 2013
INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING Volume 3, No 3, 2013 Copyright by the authors - Licensee IPA- Under Creative Commons license 3.0 Research article ISSN 0976 4399 Reliability of
More informationQUESTION TO AUDIENCE
Site investigation some aspects of EN1997 Part 2 David Norbury David Norbury Limited BGA Symposium Eurocode 7 Today and Tomorrow, Cambridge, England, March 2011 QUESTION TO AUDIENCE How many of you have
More informationGeotechnical Investigation Test Report
Geotechnical Investigation Test Report Report No. htsc/rcd/ 3457 Dated: - 20/03/2010 Asphalt Standard Penetration Test as per IS 2131 ------------- IS 6403 Soil Job Card No - 1649 Cement Client/Department
More informationTECHNICAL REPORT ON SCALA DYNAMIC CONE PENETROMETER IRREGULARITY
TECHNICAL REPORT ON SCALA DYNAMIC CONE PENETROMETER IRREGULARITY CETANZ Technical Report TR 1 Author(s) SJ Anderson, Geotechnics Ltd Report Date First Issue May 2010 Report Revision Date September 2011
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK skern Road arcroft Doncaster South Yorkshire DN6 8DG
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK skern Road arcroft Doncaster South Yorkshire DN6 8DG
More information2009 Japan-Russia Energy and Environment Dialogue in Niigata S2-6 TANAKA ERINA
Importance of the Site Investigation for Development of Methane Hydrate Hokkaido University Hiroyuki Tanaka Civil Engineer My Background Site Investigation Soil Parameters for Design Very Soft Clay and
More informationCone Penetration Testing (CPT) Michael Bailey, P.G. U.S. Army Corps of Engineers, Savannah District
Cone Penetration Testing (CPT) Michael Bailey, P.G. U.S. Army Corps of Engineers, Savannah District Recommended publications ASTM D 5778-07 Standard Test Method for Electronic Friction Cone and Piezocone
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- 4420798 -Unit title- CONSTRUCTION TECHNOLOGY 2: SUBSTRUCTURE AND REMEDIAL WORKS -Superclass category-
More informationMultiple parameters with one Cone Penetration Test. by Mark Woollard
Multiple parameters with one Cone Penetration Test by Mark Woollard Subjects introduction MW introduction APB introduction CPT portfolio APB onshore CPT equipment near shore CPT equipment offshore CPT
More informationChapter 5 FIELD AND LABORATORY TESTING PROCEDURES
Chapter 5 FIELD AND LABORATORY TESTING PROCEDURES Final SCDOT GEOTECHNICAL DESIGN MANUAL August 2008 Table of Contents Section Page 5.1 Introduction...5-1 5.2 Sampling Procedure...5-1 5.2.1 Soil Sampling...5-1
More informationhs2 Ground A non-technical guide
hs2 Ground Investigations A non-technical guide Contents HS2 ground investigations 1 Essential Q&A 2 2 In-ground investigation techniques 9 2.1 Cable percussion borehole 10 2.2 Rotary core borehole 12
More informationTECHNICAL SPECIFICATION FOR GEOTECHNICAL INVESTIGATION
SHEET 1 OF 50 TECHNICAL SPECIFICATION FOR GEOTECHNICAL INVESTIGATION 1.0 GENERAL 2.0 SCOPE This specification covers the technical requirements for a detailed Geotechnical investigation and submission
More informationVOLUME III GEOLOGY, HYDROGEOLOGY & GEOTECHNICAL REPORT CAPITAL REGION RESOURCE RECOVERY CENTRE
2.0 SITE INVESTIGATION METHODOLOGY The following section summarizes the Site investigation methodology applied during the subsurface investigation and hydrogeological assessment completed at the CRRRC
More informationREPORT. Earthquake Commission. Christchurch Earthquake Recovery Geotechnical Factual Report Merivale
REPORT Earthquake Commission Christchurch Earthquake Recovery Geotechnical Factual Report Merivale REPORT Earthquake Commission Christchurch Earthquake Recovery Geotechnical Factual Report Merivale Report
More informationBuildings Department Practice Note for Registered Contractors 38. Registration of General Building Contractors and Specialist Contractors
Buildings Department Practice Note for Registered Contractors 38 Registration of General Building Contractors and Specialist Contractors This practice note covers solely the registration of general building
More informationGEOTECHNICAL ENGINEERING II. Subject Code : 06CV64 Internal Assessment Marks : 25 PART A UNIT 1
GEOTECHNICAL ENGINEERING II Subject Code : 06CV64 Internal Assessment Marks : 25 PART A UNIT 1 1. SUBSURFACE EXPLORATION 1.1 Importance, Exploration Program 1.2 Methods of exploration, Boring, Sounding
More informationChittagong Hill Tract Development Facilities (CHTDF) United Nations Development Programme
Chittagong Hill Tract Development Facilities (CHTDF) United Nations Development Programme Main Report Deliverable 02 Sub-Surface Properties of Soil Development in Rangamati, Bandarban and Khagrachari Municipality
More informationCEEN 162 - Geotechnical Engineering Laboratory Session 7 - Direct Shear and Unconfined Compression Tests
PURPOSE: The parameters of the shear strength relationship provide a means of evaluating the load carrying capacity of soils, stability of slopes, and pile capacity. The direct shear test is one of the
More informationGeotechnical Standards Eurocodes. An update
Geotechnical Standards Eurocodes. An update Professor Ltd Sussex University EUROCOE 7 (EN 1997) Part 1 published. 2004 National Annex published 2007 Part 2 published Mar 2007 National Annex published 2010
More informationLABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO
LABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO STANDARD IS: 2720 (Part 16) 1979. DEFINITION California bearing ratio is the ratio of force per unit area required to penetrate in to a soil mass with
More informationNuGeneration Ltd Site Investigations
NuGeneration Ltd Site Investigations Introducing the site assessment and radiological characterisation project NuGen has commissioned an engineering consortium - which is a joint venture of IBERDROLA Ingeniería
More information1.0 INTRODUCTION 1 2.0 SCOPE OF WORK 2 3.0 EXECUTION OF FIELD WORK 2 4.0 LABORATORY TESTS 8 5.0 FINDINGS OF THE GEOTECHNICAL INVESTIGATION 9
REPORT ON GEOTECHNICAL INVESTIGATION FOR LPG MOUNDED STORAGE AT VISAKHA REFINERY, MALKAPURAM, VISAKHAPATNAM (A.P) FOR HINDUSTAN PETROLEUM CORPORATION LIMITED CONTENTS SR.NO. DESCRIPTION PAGE NO. 1.0 INTRODUCTION
More informationproduct manual HS-4210 HS-4210_MAN_09.08 Digital Static Cone Penetrometer
HS-4210_MAN_09.08 product manual HS-4210 Digital Static Cone Penetrometer Introduction This Manual covers the measurement of bearing capacity using the Humboldt Digital Static Cone Penetrometer (DSCP).
More informationGUJARAT NARMADA VALLEY FERTILIZER CO. LTD. (GNFC Ltd) TECHNICAL REPORT GEOTECHNICAL INVESTIGATION FOR PROPOSED TDI PLANT AT VILLAGE RAHIYAD, DAHEJ
GUJARAT NARMADA VALLEY FERTILIZER CO. LTD. (GNFC Ltd) TECHNICAL REPORT OF GEOTECHNICAL INVESTIGATION FOR PROPOSED TDI PLANT AT VILLAGE RAHIYAD, DAHEJ BY: DR.K.C.THAKER B.E.(CIVIL) ; M.TECH (S.M.); (I.I.T,
More informationTable of Contents 10.1 GENERAL... 10.1-1
Table of Contents Section Page 10.1 GENERAL... 10.1-1 10.1.1 Overview... 10.1-1 10.1.2 Role of Uncertainty in Property Interpretation... 10.1-1 10.1.3 Role of Drainage in Property Interpretation... 10.1-2
More informationTesting Procedures. Note: Please refer to Table 2 for a list of completed borings.
Testing Procedures Drilling and Sampling: Standard penetration tests (SPT) were conducted for every ten feet of boring advancement. SPT tests were conducted in accordance with ASTM D1586, using a 140 pound
More informationEASTERN KENTUCKY UNIVERSITY Serving Kentuckians Since 1906 Office of Finance & Administration Commonwealth 1410
EASTERN KENTUCKY UNIVERSITY Serving Kentuckians Since 1906 Office of Finance & Administration Commonwealth 1410 Division of Capital Construction 521 Lancaster Avenue & Project Administration Richmond,
More informationINVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT
INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT Sealed tender offers are invited in two separate sealed covers (Technical and Commercial offers) from eligible manufacturers/suppliers or their direct Indian
More informationDEM modelling of the dynamic penetration process on Mars as a part of the NASA InSight Mission
Proceedings of the 4th European Young Geotechnical Engineers Conference (EYGEC), Durham, UK Osman, A.S. & Toll, D.G. (Eds.) 05 ISBN 978-0-9933836-0 DEM modelling of the dynamic penetration process on Mars
More informationEurocode 7 Geotechnical design
BRITISH STANDARD BS EN 1997-2:2007 Eurocode 7 Geotechnical design Part 2: Ground investigation and testing The European Standard EN 1997-2:2007 has the status of a British Standard ICS 91.060.01; 91.120.20
More informationGEOTECHNICAL DESIGN MANUAL
GEOTECHNICAL DESIGN MANUAL CHAPTER 4 GEOTECHNICAL FIELD INVESTIGATION NYSDOT Geotechnical Page 4-1 December 10, 2013 (Intentionally left blank) NYSDOT Geotechnical Page 4-2 December 10, 2013 Table of Contents
More informationUNOPS UNITED NATIONS OFFICE FOR PROJECT SERVICES
UNOPS UNITED NATIONS OFFICE FOR PROJECT SERVICES TERM OF REFERENCE FOR DESIGNING OF KABUL UNIVERSITY PROJECT 3-STOREYS BUILDING LOCATED AT KABUL UNIVERSITY COMPOUND ISSUED FOR TENDER ONLY PROJECT No: 00082000
More informationCone Penetration Testing in Geotechnical Practice. Tom Lunne Peter K. Robertson John J.M. Powell
Cone Penetration Testing in Geotechnical Practice Tom Lunne Peter K. Robertson John J.M. Powell BLACKIE ACADEMIC & PROFESSIONAL An Imprint of Chapman & Hall London Weinheim New York Tokyo Melbourne Madras
More informationEVALUATING THE IMPROVEMENT FROM IMPACT ROLLING ON SAND
EVALUATING THE IMPROVEMENT FROM IMPACT ROLLING ON SAND D.L. Avalle, Broons Hire (SA) Pty Ltd, Australia J.P. Carter, The University of Sydney, Australia Abstract Impact rolling, utilising a non-circular
More informationGEOTECHNICAL DESIGN MANUAL
GEOTECHNICAL DESIGN MANUAL CHAPTER 6 ENGINEERING PROPERTIES OF SOIL AND ROCK NYSDOT Geotechnical Page 6-1 June 17, 2013 (Intentionally left blank) NYSDOT Geotechnical Page 6-2 June 17, 2013 Table of Contents
More informationCHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION 1.1 Introduction The design and construction of foundations require a good knowledge of the mechanical behaviour of soils and of their spatial variability. Such information can be
More informationFOUNDATION INVESTIGATIONS FOR STRUCTURES
FOUNDATION INVESTIGATIONS FOR STRUCTURES 6 INDEX Page I. Overview of MoDOT Practice 1 A. Geotechnical Organization of MoDOT 1 B. Types of Reports 1 C. Special Investigations 2 II. Policy Manuals 3 A. Materials
More informationConstruction Materials Testing. Classes of Test
Construction Materials Testing Classes of Test February 2014 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected by copyright under the Commonwealth of Australia
More informationON THE INTERPRETATION OF SEISMIC CONE PENETRATION TEST (SCPT) RESULTS
Studia Geotechnica et Mechanica, Vol. XXXV, No. 4, 213 DOI: 1.2478/sgem-213-33 ON THE INTERPRETATION OF SEISMIC CONE PENETRATION TEST (SCPT) RESULTS IRENA BAGIŃSKA Wrocław University of Technology, Faculty
More informationKing Saud University College of Engineering Civil Engineering Department DEFORMATION OF PARTIALLY SATURATED SAND. Sultan Musaed Al-Ghamdi
King Saud University College of Engineering Civil Engineering Department DEFORMATION OF PARTIALLY SATURATED SAND By Sultan Musaed Al-Ghamdi Submitted in Partial Fulfillment of The Required For the Degree
More informationCONSULTANCY & MATERIAL TESTING FACILITY
CONSULTANCY & MATERIAL TESTING FACILITY (CIVIL ENGINEERING DEPARTMENT) JAYPEE UNIVERSITY OF ENGINEERING & TECHNOLOGY A.B. ROAD, P.B. NO-1, RAGHOGARH, DIST: GUNA (M.P.) - 473226 Phone: 07544-267051, 267310-314,
More informationFugro monitoring services. If you can t measure it, you can t improve it : Lord Kelvin (1824-1907)
Fugro monitoring services If you can t measure it, you can t improve it : Lord Kelvin (1824-1907) Local presence and global integration Fugro N.V. Onshore Geotechnics Ralf Trapphoff Onshore Geotechnics
More informationSTP883-EB/Nov. 1985. Subject Index
STP883-EB/Nov. 1985 Subject Index A Aas in-situ tests, 209-210 Analytical model technique, 432, 438 Andersen's procedure, 342, 345,349-351 Arabian Gulf soils, 413 ASCE conference, 41 ASTM Standards D 422:385
More informationDr John J M Powell Geolabs Ltd
When or should advanced laboratory testing be routine Dr John J M Powell Geolabs Ltd 7/11/2012 - Doha Routine tests Atterbergs Particle size, density, specific gravity Compaction, CBR Shear box Triaxial
More informationNOTES on the CONE PENETROMETER TEST
GE 441 Advanced Engineering Geology & Geotechnics Spring 2004 Introduction NOTES on the CONE PENETROMETER TEST The standardized cone-penetrometer test (CPT) involves pushing a 1.41-inch diameter 55 o to
More informationMethod Statement FOR. Soil Investigation
Method Statement FOR Soil Investigation PREPARED BY JUNE 2010 Infratech ASTM CO., LTD. TABLE OF CONTENTS Chapter Title Page Table of Contents..1 List of Appendix... 2 List of Table... 2 List of Figures...
More informationThe physical survey is that part of site investigation which aims to determine the physical properties of the ground. These are required:
Chapter 9 In situ testing INTRODUCTION The physical survey is that part of site investigation which aims to determine the physical properties of the ground. These are required: 1. to classify the soil
More informationEARTHWORKS COMPLETION REPORT ELLEN STIRLING PARADE, ELLENBROOK. Ellenbrook, W.A. Georgiou Group Pty Ltd
EARTHWORKS COMPLETION REPORT ELLEN STIRLING PARADE, ELLENBROOK Ellenbrook, W.A. Georgiou Group Pty Ltd GEOTPERT08050AZ-AH 27 March 2013 EARTHWORKS COMPLETION REPORT ELLEN STIRLING PARADE, ELLENBROOK Ellenbrook,
More informationSoil Mechanics. Soil Mechanics
Soil is the most misunderstood term in the field. The problem arises in the reasons for which different groups or professions study soils. Soil scientists are interested in soils as a medium for plant
More informationCaltrans Geotechnical Manual
Cone Penetration Test The cone penetration test (CPT) is an in-situ sounding that pushes an electronic penetrometer into soil and records multiple measurements continuously with depth. Compared with rotary
More informationDynamic probing can have an important role in
The use of the Mackintosh Probe for site investigation in soft soils A. Fakher 1, M. Khodaparast 1 & C.J.F.P. Jones 2 1 Geotechnical Group, Civil Engineering Department, University of Tehran, PO Box: 11365-4563,
More informationHow To Work On A Mine In India
INDRAPRASTHA INSTITUTE OF INFORMATION TECHNOLOGY DELHI (A state university established by Govt. of NCT of Delhi) Okhla, Phase III (Near Govind Puri Metro Station), New Delhi-110020, INDIA Telephone: +91
More informationLocal Authority Building Control Technical Information Note 3 Driven and In-situ Piled Foundations
Local Authority Building Control Technical Information Note 3 Driven and In-situ Piled Foundations Cambridge City Council - East Cambridgeshire District Council - Fenland District Council, Huntingdonshire
More informationMETHOD OF STATEMENT FOR STATIC LOADING TEST
Compression Test, METHOD OF STATEMENT FOR STATIC LOADING TEST Tension Test and Lateral Test According to the American Standards ASTM D1143 07, ASTM D3689 07, ASTM D3966 07 and Euro Codes EC7 Table of Contents
More informationDesign, Testing and Automated Monitoring of ACIP Piles in Residual Soils
Design, Testing and Automated Monitoring of ACIP Piles in Residual Soils Stephen W. Lacz 1, M. ASCE, P.E. and Richard C. Wells 2, F. ASCE, P.E. 1 Senior Professional, Trigon Kleinfelder, Inc., 313 Gallimore
More informationStandard Test Procedures Manual
STP 240-6 Standard Test Procedures Manual Section: PENETRATION TEST & SPLIT- BARREL SAMPLING 1. SCOPE 1.1. Description of Test This method describes the standard penetration test using the split-barrel
More informationSUPPLEMENTAL TECHNICAL SPECIFICATIONS BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS
July 14, 2015 1.0 GENERAL BI-DIRECTIONAL STATIC LOAD TESTING OF DRILLED SHAFTS This work shall consist of furnishing all materials, equipment, labor, and incidentals necessary for conducting bi-directional
More informationSNC-Lavalin Inc. Montcalm Wastewater Pumping Station Upgrades - Geotechnical Report. October 2011
SNC-Lavalin Inc. Montcalm Wastewater Pumping Station Upgrades - Geotechnical Report October 2011 SNC-Lavalin Inc Montcalm Wastewater Pumping Station Upgrades - Geotechnical Report Table of Contents 1.0
More informationIn Situ Subsurface Characterization
27 In Situ Subsurface Characterization J. David Frost Georgia Institute of Technology Susan E. Burns Georgia Institute of Technology 27.1 Introduction 27.2 Subsurface Characterization Methodology 27.3
More informationSOIL INVESTIGATION REPORT
SOIL INVESTIGATION REPORT PROJECT GEOTECHNICAL INVESTIGATION FOR PROPOSED WINDMILL FOUNDATION AT LOCATION JDA-13 AT BALNABA VILLAGE, BHUJ-KUTCH CLIENT M/S SUZLON INFRASTRUCTURES SERVICES LTD PROJECT NO.
More informationCONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST
CONSTANT HEAD AND FALLING HEAD PERMEABILITY TEST 1 Permeability is a measure of the ease in which water can flow through a soil volume. It is one of the most important geotechnical parameters. However,
More informationHow To Test For Soil
UnitedKingdomofGreat BritainandNorthernIreland EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equaljusticefor al,abeterinformedcitizenry,theruleoflaw,worldtradeandworld peace,thislegaldocumentisherebymadeavailableonanoncommercial
More informationInternational Journal of Scientific & Engineering Research, Volume 4, Issue 9, September-2013 409 ISSN 2229-5518
International Journal of Scientific & Engineering Research, Volume 4, Issue 9, September-2013 409 Estimation of Undrained Shear Strength of Soil using Cone Penetration Test By Nwobasi, Paul Awo Department
More informationReport. Geotechnical Investigation Proposed Easy Access Upgrade Marrickville Railway Station Station Street, Marrickville, NSW
Pty Ltd ABN 62 084 294 762 Unit 5/39-41 Fourth Avenue, Blacktown, NSW 2148, Australia Tel : (02) 9679 8733 PO Box 1543, Macquarie Centre. North Ryde, NSW 2113 Fax : (02) 9679 8744 Report Geotechnical Investigation
More informationEnglish version Version Française Deutsche Fassung. Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 1997-2:2007/AC June 2010 Juin 2010 Juni 2010 ICS 91.120.20; 91.060.01 English version Version Française Deutsche Fassung Eurocode 7 - Geotechnical
More informationSoil Classification Through Penetration Tests
Pak. J. Engg. & Appl. Sci. Vol. 9, Jul., 2011 (p. 76-86) Soil Classification Through Penetration Tests A. H. Khan, A. Akbar, K. Farooq, N. M. Khan, M. Aziz and H. Mujtaba Department of Civil Engineering,
More informationA study on the Effect of Distorted Sampler Shoe on Standard Penetration Test Result in Cohesionless soil
ISSN: 319-53 (An ISO 39: 00 Certified Organization) A study on the Effect of Distorted Sampler Shoe on Standard Penetration Test Result in Cohesionless soil Utpal Kumar Das Associate Professor, Department
More informationASSESSMENT OF SHEAR WAVE VELOCITY FROM INDIRECT INSITU TESTS
Proceedings of Indian Geotechnical Conference IGC-2014 December 18-20, 2014, Kakinada, India ASSESSMENT OF SHEAR WAVE VELOCITY FROM INDIRECT INSITU TESTS Kant, L., M. Tech Student, Department of Earthquake
More informationStrength Determination of "Tooth-Paste" Like Sand and Gravel Washing Fines Using DMT
Strength Determination of "Tooth-Paste" Like Sand and Gravel Washing Fines Using DMT David L. Knott, P.E. and James M. Sheahan, P.E. HDR Engineering, Inc. 3 Gateway Center Pittsburgh, PA 15222-1074 Phone:
More informationINTRODUCTION TO SOIL MODULI. Jean-Louis BRIAUD 1
INTRODUCTION TO SOIL MODULI By Jean-Louis BRIAUD 1 The modulus of a soil is one of the most difficult soil parameters to estimate because it depends on so many factors. Therefore when one says for example:
More information