lista mensal setembro 2012

Transcription

1 lista mensal setembro 2012 A presente -publicação tem por objetivo: - A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das Normas Europeias adotadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadas e já disponíveis. - A divulgação pública dos projetos de Normas Portuguesas, Europeias e Internacionais, com vista à obtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais que possam ser considerados na sequente elaboração, aprovação e homologação das Normas. - A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para que se possa obter, durante o período de inquérito público, os pontos de vista e as contribuições nacionais. - A divulgação da edição e anulação de outros documentos. ÍNDICE 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas Normas Portuguesas anuladas Normas Portuguesas em re-exame Normas Europeias adotadas Normas Europeias Publicadas 2.1 CEN CENELEC CEN/CENELEC ETSI Normas Internacionais publicadas IEC / ISO 60 / Projetos de normas portuguesas 4.1 Projetos em inquérito público Projetos anulados Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) 5.1 Projetos em inquérito público Questionários preliminares Comités Técnicos do CEN. 112 Mod-DNOR-01-08_01 Rua António Gião, CAPARICA Tel Fax

2 ÍNDICE (cont.) 6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Electrotécnica (CENELEC) 6.1 Projetos em inquérito público Propostas de anulação de Normas Proposta de estudo de novas normas - "Vilamoura Procedures" Questionários preliminares Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC) 7.1 Projetos em inquérito público Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 8.1 Projetos em inquérito público Propostas de anulação de Normas Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO) 9.1 Projetos em inquérito público Comités Técnicos da ISO Projetos de normas e propostas de estudo de novas normas da Comissão Electrotécnica Internacional (IEC) 10.1 Projetos em inquérito público Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC) 11.1 Projetos em inquérito público Edição e anulação de outros documentos Normativos 12.1 Diretivas CNQ 193 Mod-DNOR-01-08_01 Rua António Gião, CAPARICA Tel Fax

3 1. Normas Portuguesas 1.1 Normas Portuguesas publicadas Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP EN ISO, NP ISO, NP IEC, NP ISO/IEC, NP EN ISO/IEC, NP HD ou NP ENV, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Homologação e a respectiva data. As Normas Portuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal. A250 / CT 25 NP 4512-INGLÊS:2012 ( 1ª Edição ) Preço: 45,00 EUR Sistema de gestão da formação profissional, incluindo a aprendizagem enriquecida por tecnologia Requisitos Termo de Homologação nº 2012/9999, C10 / CT 1 NP ISO 11005:2012 ( 1ª Edição ) Preço: 10,50 EUR Documentação técnica de produtos Utilização de documentos principais ISO 11005:2010 IDT Termo de Homologação nº 2012/0212, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 17,50 EUR Símbolos gráficos para esquemas Parte 10: Conversores para transmissões hidráulicas e pneumáticas ISO :2002 IDT Termo de Homologação nº 2012/0223, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 14,00 EUR Símbolos gráficos para esquemas Parte 11: Dispositivos para transferência de calor e motores térmicos ISO :2002 IDT Termo de Homologação nº 2012/0224, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 14,00 EUR Símbolos gráficos para esquemas Parte 12: Dispositivos de separação, purificação e mistura ISO :2002 IDT Termo de Homologação nº 2012/0225, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 10,50 EUR Símbolos gráficos para esquemas Parte 13: Dispositivos para transformação de materiais ISO :2004 IDT Termo de Homologação nº 2012/0213, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 10,50 EUR Símbolos gráficos para esquemas Parte 14: Dispositivos para transporte e movimentação de materiais ISO :2004 IDT Termo de Homologação nº 2012/0226, C10 / CT 1 NP ISO :2012 ( 1ª Edição ) Preço: 14,00 EUR Símbolos gráficos para esquemas Parte 15: Esquemas de instalação e mapas de rede ISO :2002 IDT Termo de Homologação nº 2012/0227, C10 / CT 1 NP ISO 15786:2012 ( 1ª Edição ) Preço: 21,00 EUR Desenhos técnicos Representação e cotagem simplificadas de furos ISO 15786:2008 IDT Termo de Homologação nº 2012/0236, C10 / CT 1 NP ISO 29845:2012 ( 1ª Edição ) Preço: 50,00 EUR Documentação técnica de produtos Tipos de documentos ISO 29845:2011 IDT Termo de Homologação nº 2012/0239, C40 / CT 4 NP EN 13772:2012 ( 2ª Edição ) Preço: 14,00 EUR Têxteis e produtos têxteis Comportamento ao fogo - Cortinas e cortinados Medição da propagação da chama de provetes orientados verticalmente com uma larga fonte de ignição EN 13772:2011 IDT Termo de Homologação nº 2012/0168, C40 / CT 4 NP EN ISO 3758:2012 ( 2ª Edição ) Preço: 28,00 EUR Têxteis Simbologia de etiquetagem de conservação (ISO 3758:2012) EN ISO 3758:2012 IDT Termo de Homologação nº 2012/0208, C40 / CT 4 NP EN ISO 6330:2012 ( 3ª Edição ) Preço: 35,00 EUR Têxteis Procedimentos de lavagem e secagem doméstica para ensaio de têxteis (ISO 6330:2012) EN ISO 6330:2012 IDT Termo de Homologação nº 2012/0209, C40 / CT 4 NP EN ISO :2012 ( 2ª Edição ) Preço: 17,50 EUR Têxteis Avaliação da inflamabilidade de artigos de cama Parte 1: Fonte de ignição: cigarro aceso (ISO :2010) EN ISO :2010 IDT Termo de Homologação nº 2012/0164, C40 / CT 4 NP EN ISO :2012 ( 2ª Edição ) Preço: 17,50 EUR Têxteis Avaliação da inflamabilidade de artigos de cama Parte 2: Fonte de ignição: chama equivalente a um fósforo (ISO :2010) EN ISO :2010 IDT Termo de Homologação nº 2012/0165, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

4 C120 / CT 12 NP EN 10058:2012 ( 1ª Edição ) Preço: 10,50 EUR Barras retangulares de aço laminadas a quente para aplicações gerais Dimensões e tolerâncias na forma e dimensões EN 10058:2003 IDT Termo de Homologação nº 2012/0217, C120 / CT 12 NP EN 10059:2012 ( 1ª Edição ) Preço: 10,50 EUR Barras quadradas de aço laminadas a quente para aplicações gerais Dimensões e tolerâncias na forma e dimensões EN 10059:2003 IDT Termo de Homologação nº 2012/0218, C120 / CT 12 NP EN 10060:2012 ( 1ª Edição ) Preço: 10,50 EUR Varões de aço laminados a quente para aplicações gerais Dimensões e tolerâncias na forma e nas dimensões EN 10060:2003 IDT Termo de Homologação nº 2012/0219, C120 / CT 12 NP EN 10061:2012 ( 1ª Edição ) Preço: 10,50 EUR Barras hexagonais de aço laminadas a quente para aplicações gerais Dimensões e tolerâncias na forma e dimensões EN 10061:2003 IDT Termo de Homologação nº 2012/0220, C140 / CT 14 NP 4487:2012 ( 2ª Edição ) Preço: 21,00 EUR Madeira e embalagens de madeira de Resinosas Tratamento fitossanitário pelo calor para eliminação do nemátode da madeira do pinheiro (Bursaphelenchus xylophilus) e outros organismos prejudiciais Termo de Homologação nº 2012/0245, C600 / CT 60 NP EN 14046:2011 ( 1ª Edição ) Preço: 24,50 EUR Embalagem Avaliação da biodegradabilidade aeróbia final e desintegração de materiais de embalagem em condições controladas de compostagem Método por análise do dióxido de carbono libertado EN 14046:2003 IDT Termo de Homologação nº 2011/0100, C800 / CT 80 NP EN ISO 19011:2012 ( 2ª Edição ) Preço: 45,00 EUR Linhas de orientação para auditorias a sistemas de gestão (ISO 19011:2011) EN ISO 19011:2011 IDT Termo de Homologação nº 2012/0193, C800 / CT 80 NP ISO 31000:2012 ( 1ª Edição ) Preço: 28,00 EUR Gestão do risco Princípios e linhas de orientação ISO 31000:2009 IDT Termo de Homologação nº 2012/0200, C810 / CT 81 NP EN :2004+A1:2012 ( 1ª Edição ) Preço: 47,50 EUR Aparelhos de elevação de carga suspensa Equipamentos Parte 2: Equipamentos não eléctricos EN :2004+A1:2010 IDT Termo de Homologação nº 2012/0148, C810 / CT 81 NP EN :2003+A2:2012 ( 1ª Edição ) Preço: 28,00 EUR Aparelhos de elevação de carga suspensa Comandos e postos de comando EN :2003+A2:2008 IDT Termo de Homologação nº 2012/0169, C460 / CT 46 NP 4513:2012 ( 1ª Edição ) Preço: 47,50 EUR Segurança contra incêndios Requisitos do serviço de comercialização, instalação e manutenção de produtos, equipamentos e sistemas de segurança contra incêndio Termo de Homologação nº 2012/0246, C460 / CT 46 NP EN 54-25:2011 /AC :2012 ( 1ª Edição ) Preço: 0,00 EUR Sistemas de detecção e alarme de incêndio Parte 25: Componentes utilizando ligações radioelétricas EN 54-25:2008 /AC :2012 IDT C580 / CT 58 NP EN :2012 ( 2ª Edição ) Preço: 21,00 EUR Sistemas de tubagens de plástico para o abastecimento de água, e para drenagem e saneamento com pressão Polietileno (PE) Parte 1: Aspetos gerais EN :2011 IDT Termo de Homologação nº 2012/0176, C580 / CT 58 NP EN :2012 ( 2ª Edição ) Preço: 28,00 EUR Sistemas de tubagens de plástico para o abastecimento de água, e para drenagem e saneamento com pressão Polietileno (PE) Parte 2: Tubos EN :2011 IDT Termo de Homologação nº 2012/0177, C580 / CT 58 NP EN :2012 ( 2ª Edição ) Preço: 14,00 EUR Sistemas de tubagens de plástico para o abastecimento de água, e para drenagem e saneamento com pressão Polietileno (PE) Parte 5: Aptidão ao uso do sistema EN :2011 IDT Termo de Homologação nº 2012/0178, C870 / CT 87 NP 4506:2012 ( 1ª Edição ) Preço: 10,50 EUR Calibração de seringas Termo de Homologação nº 2012/0180, C1040 / CT 104 NP EN :2010 /Errata :2012 ( 1ª Edição ) Preço: 0,00 EUR Ensaios do betão fresco Parte 11: Betão autocompactável Ensaio de segregação no peneiro C1170 / CT 117 NP EN 13618:2012 ( 1ª Edição ) Preço: 28,00 EUR Ligações flexíveis para instalações de água potável Especificações funcionais e métodos de ensaio EN 13618:2011 IDT Termo de Homologação nº 2012/0076, C1540 / CT 154 NP EN :2012 ( 3ª Edição ) Preço: 14,00 EUR Ensaios das propriedades mecânicas e físicas dos agregados Parte 1: Determinação da resistência ao desgaste (micro-deval) EN :2011 IDT Termo de Homologação nº 2012/0120, C1540 / CT 154 NP EN :2012 ( 2ª Edição ) Preço: 14,00 EUR Ensaios das propriedades mecânicas e físicas dos agregados Parte 4: Determinação dos vazios do fíler seco compactado EN :2008 IDT Termo de Homologação nº 2012/0121, C1540 / CT 154 NP EN :2012 ( 2ª Edição ) Preço: 14,00 EUR Ensaios das propriedades mecânicas e físicas dos agregados Parte 7: Determinação da massa volúmica do fíler Método do picnómetro EN :2008 IDT Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

5 Termo de Homologação nº 2012/0122, C1550 / CT 155 NP EN :2012 ( 1ª Edição ) Preço: 35,00 EUR Colunas de iluminação Parte 3-3: Conceção e verificação Verificação por cálculo EN :2003 IDT Termo de Homologação nº 2012/0181, C1550 / CT 155 NP EN :2012 ( 1ª Edição ) Preço: 35,00 EUR Iluminação pública Parte 3: Cálculo de desempenho EN :2003 IDT;EN :2003 /AC :2005 IDT;EN Termo de Homologação nº 2012/0125, desempenho (IEC 60357:2002, modificada + A1:2006, modificada + A2: A3:2011) EN 60357:2003 IDT;EN 60357:2003 /CORRIGENDUM Jul:2003 IDT; Termo de Homologação nº 2012/0074, E3400 / CT 34 NP EN 60399:2007 /A 1:2012 ( 1ª Edição ) Preço: 7,00 EUR Roscas de filete redondo para suportes com aro de suporte do quebra-luz (IEC 60399:2004/A1:2008) EN 60399:2004 /A 1:2008 IDT Termo de Homologação nº 2012/0172, C1550 / CT 155 NP EN :2012 ( 1ª Edição ) Preço: 17,50 EUR Iluminação pública Parte 4: Métodos de medição de desempenho de iluminação EN :2003 IDT Termo de Homologação nº 2012/0126, C1740 / CT 174 NP ISO 897:2012 ( 1ª Edição ) Preço: 7,00 EUR Fotografia Filmes em rolo e filmes em formatos 126, 110 e 135 Identificação da face portadora da imagem ISO 897:2000 IDT Termo de Homologação nº 2012/0232, C1740 / CT 174 NP ISO 1754:2012 ( 1ª Edição ) Preço: 7,00 EUR Fotografia Câmeras que utilizam filmes e películas de 35 mm Dimensões da imagem ISO 1754:2010 IDT Termo de Homologação nº 2012/0233, C1740 / CT 174 NP ISO 18906:2012 ( 1ª Edição ) Preço: 17,50 EUR Materiais para imagem Filmes fotográficos Especificação para o filme seguro ISO 18906:2000 IDT Termo de Homologação nº 2012/0234, E1700 / CT 17 NP EN 62208:2012 ( 1ª Edição ) Preço: 24,50 EUR Invólucros vazios para conjuntos de aparelhagem de baixa tensão Requisitos gerais (IEC 62208:2011) EN 62208:2011 IDT Termo de Homologação nº 2012/0188, E2300 / CT 23 NP EN :2012 ( 2ª Edição ) Preço: 45,00 EUR Interruptores para instalações elétricas fixas, domésticas e análogas Parte 2-1: Requisitos particulares - Interruptores eletrónicos (IEC :2002, modificada + A1:2008, modificada) EN :2004 IDT;EN :2004 /CORRIGENDUM Dec:2 Termo de Homologação nº 2012/0166, E3200 / CT 32 NP HD :2012 ( 2ª Edição ) Preço: 90,50 EUR Fusíveis de baixa tensão Parte 2: Requisitos suplementares para os fusíveis destinados a serem utilizados por pessoas habilitadas (fusíveis para usos essencialmente industriais) Exemplos de sistemas de fusíveis normalizados de A a J (IEC :2010, modificada) HD :2010 IDT Termo de Homologação nº 2012/0156, E3400 / CT 34 NP EN 60357:2012 ( 1ª Edição ) Preço: 89,50 EUR Lâmpadas de tungsténio halogéneo (exceto veículos) Requisitos de E3400 / CT 34 NP EN :2002 /A 1:2012 ( 1ª Edição ) Preço: 7,00 EUR Lâmpadas de incandescência - Requisitos de segurança Parte 1: Lâmpadas de filamento de tungsténio para uso doméstico e iluminação geral análoga (IEC :1999/A1:2005) EN :2000 /A 1:2005 IDT Termo de Homologação nº 2012/0173, E3400 / CT 34 NP EN :2007 /A 2:2012 ( 1ª Edição ) Preço: 10,50 EUR Lâmpadas de incandescência Requisitos de segurança Parte 3: Lâmpadas de tungsténio-halogéneo (exceto veículos) (IEC :2002/A2:2008) EN :2003 /A 2:2008 IDT Termo de Homologação nº 2012/0184, E3400 / CT 34 NP EN :2007 /A 1:2012 ( 1ª Edição ) Preço: 10,50 EUR Suportes diversos para lâmpadas Parte 1: Requisitos gerais e ensaios (IEC :2004/A1:2008) EN :2004 /A 1:2008 IDT Termo de Homologação nº 2012/0185, E3400 / CT 34 NP EN :2007 /A 2:2012 ( 1ª Edição ) Preço: 10,50 EUR Suportes diversos para lâmpadas Parte 1: Requisitos gerais e ensaios (IEC :2004/A2:2011) EN :2004 /A 2:2011 IDT Termo de Homologação nº 2012/0186, E3400 / CT 34 NP EN 60901:2012 ( 1ª Edição ) Preço: 101,00 EUR Lâmpadas fluorescentes de casquilho único Requisitos de desempenho (IEC 60901: A1: A2: A3: A4:2007) EN 60901:1996 IDT;EN 60901:1996 /A 1:1997 IDT;EN 60901:1996 Termo de Homologação nº 2012/0171, E3400 / CT 34 NP EN 61549:2007 /A 2:2012 ( 1ª Edição ) Preço: 10,50 EUR Lâmpadas diversas (IEC 61549:2003/A2:2010) EN 61549:2003 /A 2:2010 IDT Termo de Homologação nº 2012/0187, E7600 / CT 76 NP EN :2012 ( 2ª Edição ) Preço: 47,50 EUR Segurança de equipamentos laser Parte 2: Segurança de sistemas de comunicações por fibra ótica (SCFO) (IEC : A1: A2:2010) EN :2004 IDT;EN :2004 /A 1:2007 IDT;EN Termo de Homologação nº 2012/0160, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

6 M031 / CT NP EN :2002 /A 1:2012 ( 1ª Edição ) Preço: 7,00 EUR Lâmpadas de incandescência - Requisitos de segurança Parte 2: Lâmpadas de tungsténio-halogéneo para uso doméstico e iluminação geral análoga (IEC :1999/A1:2005, modificada) EN :2000 /A 1:2005 IDT Termo de Homologação nº 2012/0183, M031 / CT NP EN :2012 ( 1ª Edição ) Preço: 17,50 EUR Dispositivos de conexão - Condutores elétricos de cobre Requisitos de segurança para órgãos de aperto roscados e não roscados Parte 2: Requisitos particulares para órgãos de aperto para condutores superiores a 35 mm² até 300 mm² (inclusive) (IEC :2003) EN :2003 IDT Termo de Homologação nº 2012/0191, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

7 1.2 Normas Portuguesas anuladas Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número, parte e data), o título, a correspondência a documentos europeus e/ou internacionais quando existam, o número do Termo de (Anulação, Homologação ou Adoção) e a respetiva data, bem como a referência do documento que a substitui. As anulações das Normas Portuguesas referenciadas tornam-se efetivas no dia seguinte ao da edição desta Lista Mensal. C190 / CT 19 NP EN 1600:2000 ( 1ª Edição ) Consumíveis para soldadura Electrodos revestidos para soldadura manual por arco dos aços inoxidáveis e dos resistentes a temperaturas elevadas Classificação EN 1600:1997 IDT Anulada em: Substituida por: EN ISO 3581:2012 C760 / CT 76 NP ISO 815:2004 ( 1ª Edição ) Borracha vulcanizada ou termoplástica Determinação da deformação residual após compressão às temperaturas ambiente, elevada ou baixa ISO 815:1991 IDT;ISO 815:1991 /CORRIGENDUM :1993 IDT Anulada em: Substituida por: NP ISO 815-1:2011;NP ISO 815-2:2011 E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 1: Aparelhagem EN :2001 IDT;EN :2001 /CORRIGENDUM Mar:20 Anulada em: Substituida por: NP EN :2011 E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 2-1: Procedimentos - Categoria A F/R EN :2001 IDT;EN :2001 /CORRIGENDUM Ma Anulada em: Substituida por: NP EN :2012 E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 2-2: Procedimentos - Categoria A EN :2001 IDT;EN :2001 /CORRIGENDUM Ma Anulada em: Substituida por: NP EN :2012 E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 2-3: Procedimentos - Categoria B EN :2001 IDT;EN :2001 /CORRIGENDUM Ma Anulada em: E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 2-4: Procedimentos - Categoria C EN :2001 IDT;EN :2001 /CORRIGENDUM Ma Anulada em: E2000 / CTE 20 NP EN :2009 ( 1ª Edição ) Métodos de ensaio comuns para cabos submetidos ao fogo Ensaio de propagação vertical de chama em feixes de condutores ou cabos montados verticalmente Parte 2-5: Procedimentos - Categoria D EN :2001 IDT;EN :2001 /CORRIGENDUM Ma Anulada em: Substituida por: EN :2009 M025 / CT NP EN 760:1999 ( 1ª Edição ) Consumíveis para soldadura Fluxos para soldadura por arco submerso Classificação EN 760:1996 IDT Anulada em: Substituida por: EN ISO 14174:2012 C40 / CT 4 NP EN ISO 3758:2006 ( 1ª Edição ) Têxteis Simbologia de etiquetagem de conservação (ISO 3758:2005) EN ISO 3758:2005 IDT Anulada em: Substituida por: EN ISO 3758:2012 C40 / CT 4 NP EN ISO 6330:2010 ( 2ª Edição ) Têxteis Métodos de lavagem e secagem domésticas para ensaio de têxteis (ISO 6330: Amd 1:2008) EN ISO 6330:2000 IDT;EN ISO 6330:2000 /A 1:2009 IDT Anulada em: Substituida por: EN ISO 6330:2012 C140 / CT 14 DNP Guia 1:2012 ( 1ª Edição ) Guia interpretativo da NP 4487:2009 Anulada em: Substituida por: NP 4487:2012 C140 / CT 14 NP 4487:2009 ( 1ª Edição ) Madeira serrada, paletes e outras embalagens de Resinosas Tratamento fitossanitário pelo calor para eliminação do nemátodo da madeira do pinheiro (Bursaphelenchus xylophilus) Anulada em: Substituida por: NP 4487:2012 C190 / CT 19 NP EN ISO 3690:2011 ( 1ª Edição ) Soldadura e processos afins Determinação do teor de hidrogénio no metal fundido da soldadura por arco de aços ferríticos (ISO 3690:2000) EN ISO 3690:2000 IDT Anulada em: Substituida por: EN ISO 3690:2012 C420 / CT 42 NP EN 397:1997 ( 1ª Edição ) Capacetes de protecção para a indústria EN 397:1995 IDT Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

8 Anulada em: Substituida por: EN 397:2012 C420 / CT 42 NP EN 812:2000 ( 1ª Edição ) Bonés de protecção para a indústria EN 812:1997 IDT Anulada em: Substituida por: EN 812:2012 C420 / CT 42 NP EN 966:1998 ( 1ª Edição ) Capacetes para desportos aéreos EN 966:1996 IDT Anulada em: Substituida por: EN 966:2012 C420 / CT 42 NP EN 966:1998 /A 1:2006 ( 1ª Edição ) Capacetes para desportos aéreos EN 966:1996 /A 1:2000 IDT Anulada em: Substituida por: EN 966:2012 C420 / CT 42 NP EN 966:1998 /A 2:2006 ( 1ª Edição ) Capacetes para desportos aéreos EN 966:1996 /A 2:2006 IDT Anulada em: Substituida por: EN 966:2012 EN ISO 13485:2003 IDT Anulada em: Substituida por: EN ISO 13485:2012 C1240 / CT 124 NP EN 13352:2008 ( 1ª Edição ) Especificação de funcionamento de medidores automáticos de nível de reservatórios EN 13352:2002 IDT Anulada em: Substituida por: EN 13352:2012 C1470 / CT 147 NP EN ISO/IEC 17020:2006 ( 1ª Edição ) Critérios gerais para o funcionamento de diferentes tipos de organismos de inspecção (ISO/IEC 17020:1998) EN ISO/IEC 17020:2004 IDT Anulada em: Substituida por: EN ISO/IEC 17020:2012 M091 / CT NP EN :2005+A1:2010 ( 2ª Edição ) Vidro na construção Envidraçados isolantes prefabricados selados Parte 5 : Avaliação da conformidade EN :2005+A1:2008 IDT Anulada em: Substituida por: EN :2005+A2:2010 C420 / CT 42 NP EN 1078:1999 ( 1ª Edição ) Capacetes para ciclistas e para utilizadores de pranchas de rolos e patins de rodas EN 1078:1997 IDT Anulada em: Substituida por: EN 1078:2012 C420 / CT 42 NP EN 1078:1999 /A 1:2006 ( 1ª Edição ) Capacetes para ciclistas e para utilizadores de pranchas de rolos e patins de rodas EN 1078:1997 /A 1:2005 IDT Anulada em: Substituida por: EN 1078:2012 C420 / CT 42 NP EN 1384:2000 ( 1ª Edição ) Capacetes de protecção para desportos hípicos EN 1384:1996 IDT Anulada em: Substituida por: EN 1384:2012 C420 / CT 42 NP EN 1385:2000 ( 1ª Edição ) Capacetes para canoagem-kayak e desportos de águas bravas EN 1385:1997 IDT Anulada em: Substituida por: EN 1385:2012 C420 / CT 42 NP EN 1385:2000 /A 1:2006 ( 1ª Edição ) Capacetes para canoagem-kayak e desportos de águas bravas EN 1385:1997 /A 1:2005 IDT Anulada em: Substituida por: EN 1385:2012 C870 / CT 87 NP EN ISO 13485:2004 ( 1ª Edição ) Dispositivos médicos Sistemas de gestão da qualidade Requisitos para fins regulamentares (ISO 13485:2003) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

9 1.3 Normas Portuguesas em re-exame Com o objetivo de se assegurar a atualidade das normas integrantes do acervo normativo nacional, as Normas Portuguesas devem ser objeto de um re-exame periódico. Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através da Lista Mensal Normas e do site, uma lista de normas portuguesas pertencentes a um determinado escalão etário. Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o título e a respetiva data, bem como o seu autor. Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o possam fazer, para cada uma das normas portuguesas constantes na presente listagem, respondendo aos seguintes pontos, tendo em conta a vossa experiência: 1 - Avaliação em termos de atualidade, a responder em alternativa: A norma portuguesa está atual? A norma portuguesa deve ser revista? A norma portuguesa está obsoleta? 2 - Eventual legislação relacionada: A norma portuguesa está referida em legislação? Se sim, qual? 3 - Comentário NOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendam conveniente, devendo enviar a informação ao Serviço de Normalização ([email protected]). LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

10 1.4 Normas Europeias adotadas Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número do Termo de Adoção e a respetiva data. Os textos das Normas Europeias Adotadas como Normas Portuguesas estão disponíveis para consulta ou aquisição neste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e alemão) e do ETSI (inglês). As adoções das Normas Europeias referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal. EN :2012 ( 2ª Edição ) Domestic cooking appliances burning gas Safety Part 1-2: Appliances having forced-convection ovens and/or grills Termo de Adopção nº2012/ 0783, EN 482:2012 ( 3ª Edição ) Workplace exposure General requirements for the performance of procedures for the measurement of chemical agents Termo de Adopção nº2012/ 0784, EN 671-1:2012 ( 3ª Edição ) Fixed firefighting systems Hose systems Part 1: Hose reels with semi-rigid hose Termo de Adopção nº2012/ 0785, EN 671-2:2012 ( 3ª Edição ) Fixed firefighting systems Hose systems Part 2: Hose systems with lay-flat hose Termo de Adopção nº2012/ 0786, EN 747-1:2012 ( 3ª Edição ) Furniture Bunk beds and high beds Part 1: Safety, strength and durability requirements Termo de Adopção nº2012/ 0787, EN 747-2:2012 ( 3ª Edição ) Furniture Bunk beds and high beds Part 2: Test methods Termo de Adopção nº2012/ 0788, EN 779:2012 ( 3ª Edição ) Particulate air filters for general ventilation Determination of the filtration performance Termo de Adopção nº2012/ 0789, EN :2012 ( 1ª Edição ) Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 26: Roll packaging machines Termo de Adopção nº2012/ 0790, EN :2012 ( 3ª Edição ) Secure storage units Requirements, classification and methods of test for resistance to burglary Part 1: Safes, ATM safes, strongroom doors and strongrooms Termo de Adopção nº2012/ 0791, EN 1467:2012 ( 2ª Edição ) Natural stone Rough blocks Requirements Termo de Adopção nº2012/ 0792, Patient handling equipment used in road ambulances Part 4: Foldable patient transfer chair Termo de Adopção nº2012/ 0795, EN 1912:2012 ( 3ª Edição ) Structural Timber Strength classes Assignment of visual grades and species Termo de Adopção nº2012/ 0796, EN :2012 ( 2ª Edição ) Industrial valves Testing of metallic valves Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements Termo de Adopção nº2012/ 0797, EN 12449:2012 ( 2ª Edição ) Copper and copper alloys Seamless, round tubes for general purposes Termo de Adopção nº2012/ 0798, EN :2012 ( 2ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens Termo de Adopção nº2012/ 0799, EN :2012 ( 3ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen Termo de Adopção nº2012/ 0800, EN :2012 ( 2ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen Termo de Adopção nº2012/ 0801, EN :2012 ( 2ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) Termo de Adopção nº2012/ 0802, EN :2012 ( 2ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens Termo de Adopção nº2012/ 0803, EN :2012 ( 2ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor Termo de Adopção nº2012/ 0804, EN 1468:2012 ( 2ª Edição ) Natural stone Rough slabs Requirements Termo de Adopção nº2012/ 0793, EN 1745:2012 ( 2ª Edição ) Masonry and masonry products Methods for determining thermal properties Termo de Adopção nº2012/ 0794, EN :2012 ( 1ª Edição ) EN :2012 ( 1ª Edição ) Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test Termo de Adopção nº2012/ 0805, EN :2012 ( 1ª Edição ) Thermal solar systems and components Custom built systems Part 1: General requirements for solar water heaters and combisystems Termo de Adopção nº2012/ 0806, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

11 EN :2012 ( 1ª Edição ) Thermal solar systems and components Custom built systems Part 2: Test methods for solar water heaters and combisystems Termo de Adopção nº2012/ 0807, EN 13575:2012 ( 2ª Edição ) Static thermoplastic tanks for the above ground storage of chemicals Blow moulded or rotationally moulded polyethylene tanks Requirements and test methods Termo de Adopção nº2012/ 0821, EN :2012 ( 2ª Edição ) Thermal solar systems and components Custom built systems Part 3: Performance test methods for solar water heater stores Termo de Adopção nº2012/ 0808, EN :2012 ( 1ª Edição ) Thermal solar systems and components Custom built systems Part 4: Performance test methods for solar combistores Termo de Adopção nº2012/ 0809, EN :2012 ( 1ª Edição ) Thermal solar systems and components Custom built systems Part 5: Performance test methods for control equipment Termo de Adopção nº2012/ 0810, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 1: Determination of longitudinal rail restraint Termo de Adopção nº2012/ 0811, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 2: Determination of torsional resistance Termo de Adopção nº2012/ 0812, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 3: Determination of attenuation of impact loads Termo de Adopção nº2012/ 0813, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 4: Effect of repeated loading Termo de Adopção nº2012/ 0814, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 5: Determination of electrical resistance Termo de Adopção nº2012/ 0815, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 6: Effect of severe environmental conditions Termo de Adopção nº2012/ 0816, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 7: Determination of clamping force Termo de Adopção nº2012/ 0817, EN :2012 ( 2ª Edição ) Railway applications Track - Test methods for fastening systems Part 8: In service testing Termo de Adopção nº2012/ 0818, EN :2012 ( 2ª Edição ) Unbound and hydraulically bound mixtures Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling Termo de Adopção nº2012/ 0819, EN :2012 ( 2ª Edição ) Railway applications Track - Performance requirements for fastening systems Part 3: Fastening systems for wood sleepers Termo de Adopção nº2012/ 0820, EN 13629:2012 ( 2ª Edição ) Wood flooring Solid individual and pre-assembled hardwood boards Termo de Adopção nº2012/ 0822, EN 13759:2012 ( 1ª Edição ) Furniture Operating mechanisms for seating and sofa-beds Test methods Termo de Adopção nº2012/ 0823, EN :2012 ( 2ª Edição ) Concrete pavements Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres Termo de Adopção nº2012/ 0824, EN 13951:2012 ( 2ª Edição ) Liquid pumps Safety requirements Agrifoodstuffs equipment; Design rules to ensure hygiene in use Termo de Adopção nº2012/ 0825, EN 13967:2012 ( 2ª Edição ) Flexible sheets for waterproofing Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet Definitions and characteristics Termo de Adopção nº2012/ 0826, EN :2012 ( 2ª Edição ) Agglomerated stone Test methods Part 4: Determination of the abrasion resistance Termo de Adopção nº2012/ 0827, EN :2012 ( 2ª Edição ) Agglomerated stone Test methods Part 5: Determination of freeze and thaw resistance Termo de Adopção nº2012/ 0828, EN :2012 ( 2ª Edição ) Agglomerated stone Test methods Part 6: Determination of thermal shock resistance Termo de Adopção nº2012/ 0829, EN :2012 ( 2ª Edição ) Agglomerated stone Test methods Part 10: Determination of chemical resistance Termo de Adopção nº2012/ 0830, EN :2012 ( 2ª Edição ) Agglomerated stone Test methods Part 12: Determination of dimensional stability Termo de Adopção nº2012/ 0831, EN 14891:2012 ( 2ª Edição ) Liquid-applied water impermeable products for use beneath ceramic tiling bonded with adhesives Requirements, test methods, evaluation of conformity, classification and designation Termo de Adopção nº2012/ 0832, EN 15186:2012 ( 1ª Edição ) Furniture Assessment of the surface resistance to scratching Termo de Adopção nº2012/ 0833, EN :2012 ( 1ª Edição ) Solid recovered fuels Determination of particle size distribution Part 2: Maximum projected length method (manual) for large dimension particles Termo de Adopção nº2012/ 0834, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

12 EN :2012 ( 1ª Edição ) Solid recovered fuels Determination of particle size distribution Part 3: Method by image analysis for large dimension particles Termo de Adopção nº2012/ 0835, EN 15609:2012 ( 2ª Edição ) LPG equipment and accessories LPG propulsion systems for boats, yachts and other craft Termo de Adopção nº2012/ 0836, EN :2010+A1:2012 ( 1ª Edição ) Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN Part 1: Test suite structure and test purposes Termo de Adopção nº2012/ 0837, EN 16150:2012 ( 1ª Edição ) Water quality Guidance on pro-rata Multi-Habitat sampling of benthic macro-invertebrates from wadeable rivers Termo de Adopção nº2012/ 0838, EN 16155:2012 ( 1ª Edição ) Foodstuffs Determination of sucralose High performance liquid chromatographic method Termo de Adopção nº2012/ 0839, EN 16215:2012 ( 1ª Edição ) Animal feeding stuffs Determination of dioxins and dioxin-like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS Termo de Adopção nº2012/ 0840, EN :2006 /A 1:2011 ( 1ª Edição ) Cable trunking systems and cable ducting systems for electrical installations Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings Termo de Adopção nº2012/ 0862, EN :2011 ( 1ª Edição ) Alarm systems - CCTV surveillance systems for use in security applications Part 5-1: Video transmission - General video transmission performance requirements Termo de Adopção nº2012/ 0863, EN :2011 ( 1ª Edição ) Alarm systems - CCTV surveillance systems for use in security applications Part 5-2: IP Video Transmission Protocols Termo de Adopção nº2012/ 0864, EN :2006 /A 1:2011 ( 1ª Edição ) Lead-acid starter batteries Part 1: General requirements and methods of test Termo de Adopção nº2012/ 0865, EN :2011 ( 1ª Edição ) Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 16-1:Type LF3 APC simplex terminated on IEC category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for Category C Termo de Adopção nº2012/ 0866, EN 50443:2011 ( 1ª Edição ) Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems Termo de Adopção nº2012/ 0867, EN :2007 /A 1:2012 ( 1ª Edição ) Three-phase oil-immersed distribution transformers 50 Hz, from 50 kva to kva with highest voltage for equipment not exceeding 36 kv Part 1: General requirements Termo de Adopção nº2012/ 0868, EN :2007 /A 1:2011 ( 1ª Edição ) Three-phase oil-immersed distribution transformers 50 Hz, from 50 kva to kva with highest voltage for equipment not exceeding 36 kv Part 4: Requirements and tests concerning pressurised corrugated tanks Termo de Adopção nº2012/ 0869, EN 50467:2011 ( 2ª Edição ) Railway applications - Rolling stock - Electrical connectors, requirements and test methods Termo de Adopção nº2012/ 0870, EN :2012 ( 1ª Edição ) Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices Part 1: Surge arresters Termo de Adopção nº2012/ 0871, EN 50533:2011 ( 1ª Edição ) Railway applications - Three-phase train line voltage characteristics Termo de Adopção nº2012/ 0872, EN 50563:2011 ( 1ª Edição ) External a.c. - d.c. and a.c - a.c power supplies - Determination of no-load power and average efficiency of active modes Termo de Adopção nº2012/ 0873, EN :1993 /A 44:2012 ( 1ª Edição ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (IEC :1969/A44:2011) Termo de Adopção nº2012/ 0874, EN :1993 /A 45:2012 ( 1ª Edição ) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (IEC :1969/A45:2011) Termo de Adopção nº2012/ 0875, EN :2002 /A 2:2012 ( 3ª Edição ) Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances (IEC :2002/A2:2011) Termo de Adopção nº2012/ 0876, EN :2012 ( 2ª Edição ) Fixed capacitors for use in electronic equipment Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors (IEC :2011) Termo de Adopção nº2012/ 0877, EN :2012 ( 2ª Edição ) Fixed capacitors for use in electronic equipment Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC :2011) Termo de Adopção nº2012/ 0878, EN :2012 ( 2ª Edição ) Fixed capacitors for use in electronic equipment Part 21: Sectional specificat - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC :2011) Termo de Adopção nº2012/ 0879, EN :2012 ( 2ª Edição ) Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

13 (IEC :2011) Termo de Adopção nº2012/ 0880, EN :2012 ( 1ª Edição ) Connectors for electronic equipment - Tests and measurements Part 9-2: Endurance tests - Test 9b: Electrical load and temperature (IEC :2011) Termo de Adopção nº2012/ 0881, EN :2012 ( 1ª Edição ) Connectors for electrical equipment - Tests and measurements Part : Signal integrity tests up to 500 MHz on IEC series connectors - Tests 27a to 27g (IEC :2011) Termo de Adopção nº2012/ 0882, EN :2012 ( 2ª Edição ) Electrical insulating materials - Determination of the effects of ionising radiation Part 5: Procedures for assessment of ageing in service (IEC :2011) Termo de Adopção nº2012/ 0883, EN :2006 /A 1:2012 ( 1ª Edição ) Luminaires Part 2-13: Particular requirements - Ground recessed luminaires (IEC :2006/A1:2011) Termo de Adopção nº2012/ 0884, EN :1994 /A 1:2012 ( 2ª Edição ) Luminaires Part 2: Particular requirements Section 18: Luminaires for swimming pools and similar applications (IEC :1993/A1:2011) Termo de Adopção nº2012/ 0885, EN :2006 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 1: General requirements for basic safety and essential performance Termo de Adopção nº2012/ 0886, EN :2009 /A 11:2011 ( 4ª Edição ) Medical electrical equipment Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories Termo de Adopção nº2012/ 0887, EN :2009 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators Termo de Adopção nº2012/ 0888, EN :2009 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators Termo de Adopção nº2012/ 0889, EN :2009 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers Termo de Adopção nº2012/ 0890, EN :2008 /A 11:2011 ( 3ª Edição ) Medical electrical equipment Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators Termo de Adopção nº2012/ 0891, Termo de Adopção nº2012/ 0892, EN :2008 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment Termo de Adopção nº2012/ 0893, EN :2008 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment Termo de Adopção nº2012/ 0894, EN :2009 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-41: Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis Termo de Adopção nº2012/ 0895, EN :2009 /A 11:2011 ( 3ª Edição ) Medical electrical equipment Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography Termo de Adopção nº2012/ 0896, EN :2009 /A 11:2011 ( 2ª Edição ) Medical electrical equipment Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment Termo de Adopção nº2012/ 0897, EN :2011 ( 4ª Edição ) Automatic electrical controls for household and similar use Part 1: General requirements (IEC :2010, modif) Termo de Adopção nº2012/ 0898, EN :2012 ( 3ª Edição ) Optical fibres Part 2: Product specifications - General (IEC :2011) Termo de Adopção nº2012/ 0899, EN :2011 ( 2ª Edição ) Safety of transportable motor-operated electric tools Part 2-5: Particular requirements for band saws (IEC : A1:2001, modif) Termo de Adopção nº2012/ 0900, EN 61217:2012 ( 2ª Edição ) Radiotherapy equipment - Coordinates, movements and scales (IEC 61217:2011) Termo de Adopção nº2012/ 0901, EN :2012 ( 2ª Edição ) Lamp controlgear Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC :2011) Termo de Adopção nº2012/ 0902, EN :2012 ( 3ª Edição ) Lamp controlgear Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) (IEC :2011) Termo de Adopção nº2012/ 0903, EN :2010 /A 11:2011 ( 3ª Edição ) EN 61701:2012 ( 2ª Edição ) Medical electrical equipment Part 2-33: Particular requirements for Salt mist corrosion testing of photovoltaic (PV) modules the basic safety and essential performance of magnetic resonance (IEC 61701:2011) equipment for medical diagnosis Termo de Adopção nº2012/ 0904, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

14 EN :2012 ( 2ª Edição ) Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 (IEC :2010) Termo de Adopção nº2012/ 0905, Termo de Adopção nº2012/ 0916, EN :2012 ( 1ª Edição ) LCD backlight unit Part 1-2: Terminology and letter symbols (IEC :2011) Termo de Adopção nº2012/ 0917, EN :2012 ( 2ª Edição ) Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 (IEC :2010) Termo de Adopção nº2012/ 0906, EN :2012 ( 1ª Edição ) Industrial communication networks Profiles - Part 5-4: Installation of fieldbuses - Installation profiles for CPF 4 (IEC :2010) Termo de Adopção nº2012/ 0907, EN :2012 ( 2ª Edição ) Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 (IEC :2010) Termo de Adopção nº2012/ 0908, EN :2012 ( 2ª Edição ) Industrial communication networks - Profiles Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 (IEC :2010) Termo de Adopção nº2012/ 0909, EN :2012 ( 2ª Edição ) Industrial communication networks - Profiles Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11 (IEC :2010) Termo de Adopção nº2012/ 0910, EN :2012 ( 1ª Edição ) Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 (IEC :2010) Termo de Adopção nº2012/ 0911, EN :2012 ( 1ª Edição ) Industrial communication networks Profiles - Part 5-14: Installation of fieldbuses - Installation profiles for CPF 14 (IEC :2010) Termo de Adopção nº2012/ 0912, EN :2012 ( 1ª Edição ) Industrial communication networks - Profiles Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15 (IEC :2010) Termo de Adopção nº2012/ 0913, EN :2012 ( 1ª Edição ) Electricity metering equipment - Dependability Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature (IEC :2011) Termo de Adopção nº2012/ 0914, EN :2012 ( 1ª Edição ) Surface Acoustic Wave (SAW) and Bulk Acoustic Wave (BAW) duplexers of assessed quality Part 2 :Guidelines for the use (IEC :2011) Termo de Adopção nº2012/ 0918, EN :2009 /A 11:2011 ( 1ª Edição ) Medical electrical equipment Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use Termo de Adopção nº2012/ 0919, EN :2009 /A 11:2011 ( 1ª Edição ) Medical electrical equipment Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery Termo de Adopção nº2012/ 0920, EN :2012 ( V2.2.1 ) Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment Part 2-2: Specification of environmental tests; Transportation Termo de Adopção nº2012/ 0921, EN :2012 ( V1.3.1 ) Environmental Engineering (EE); Acoustic noise emitted by telecommunications equipment Termo de Adopção nº2012/ 0922, EN :2012 ( V1.2.1 ) Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bands providing voice and/or data communications covering essential requirements under Article 3.2 of the R&TTE directive Termo de Adopção nº2012/ 0923, EN :2012 ( V1.2.1 ) Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Termo de Adopção nº2012/ 0924, EN ISO 179-2:1999 /A 1:2012 ( 1ª Edição ) Plastics Determination of Charpy impact properties Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011) Termo de Adopção nº2012/ 0841, EN ISO 3758:2012 ( 2ª Edição ) Textiles Care labelling code using symbols (ISO 3758:2012) Termo de Adopção nº2012/ 0842, EN :2012 ( 2ª Edição ) Fibre optic active components and devices - Performance standards Part 1: General and guidance (IEC :201X + IEC :2011 ) Termo de Adopção nº2012/ 0915, EN ISO 6330:2012 ( 2ª Edição ) Textiles Domestic washing and drying procedures for textile testing (ISO 6330:2012) Termo de Adopção nº2012/ 0843, EN ISO 6433:2012 ( 2ª Edição ) EN :2012 ( 1ª Edição ) Technical product documentation Part references Industrial communication networks - High availability automation (ISO 6433:2012) networks Part 7: Ring-based Redundancy Protocol (RRP) Termo de Adopção nº2012/ 0844, (IEC :2011) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

15 EN ISO 7214:2012 ( 3ª Edição ) Cellular plastics Polyethylene Methods of test (ISO 7214:2012) Termo de Adopção nº2012/ 0845, EN ISO 10961:2012 ( 1ª Edição ) Gas cylinders Cylinder bundles Design, manufacture, testing and inspection (ISO 10961:2010) Termo de Adopção nº2012/ 0846, Information technology Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 3: Radio frequency identification (RFID) (ISO/IEC :2008) Termo de Adopção nº2012/ 0857, EN ISO 19980:2012 ( 2ª Edição ) Ophthalmic instruments Corneal topographers (ISO 19980:2012) Termo de Adopção nº2012/ 0858, EN ISO :2012 ( 2ª Edição ) Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems (ISO :2012) Termo de Adopção nº2012/ 0847, EN ISO :2012 ( 2ª Edição ) Needle-based injection systems for medical use Requirements and test methods Part 2: Needles (ISO :2012) Termo de Adopção nº2012/ 0848, EN ISO 11930:2012 ( 1ª Edição ) Cosmetics Microbiology Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2012) Termo de Adopção nº2012/ 0849, EN ISO 12846:2012 ( 1ª Edição ) Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) Termo de Adopção nº2012/ 0850, EN ISO :2012 ( 1ª Edição ) Dentistry Periodontal probes Part 1: General requirements (ISO :2012) Termo de Adopção nº2012/ 0859, EN ISO 23125:2010 /A 1:2012 ( 1ª Edição ) Machine tools - Safety Turning machines Amendment 1 (ISO 23125:2010/Amd 1:2012) Termo de Adopção nº2012/ 0860, EN ISO :2012 ( 1ª Edição ) Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters (ISO :2012) Termo de Adopção nº2012/ 0861, HD :2011 ( 1ª Edição ) Low-voltage electrical installations Part 5-52: Selection and erection of electrical equipment - Wiring systems (IEC : corrigendum Fev 2011, modif) Termo de Adopção nº2012/0862, EN ISO 12870:2012 ( 4ª Edição ) Ophthalmic optics Spectacle frames Requirements and test methods (ISO 12870:2012) Termo de Adopção nº2012/ 0851, EN ISO 14045:2012 ( 1ª Edição ) Environmental management Eco-efficiency assessment of product systems Principles, requirements and guidelines (ISO 14045:2012) Termo de Adopção nº2012/ 0852, EN ISO :2012 ( 1ª Edição ) Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values (ISO :2009) Termo de Adopção nº2012/ 0853, EN ISO 19143:2012 ( 1ª Edição ) Geographic information Filter encoding (ISO 19143:2010) Termo de Adopção nº2012/ 0854, EN ISO :2012 ( 1ª Edição ) Geographic information Classification systems Part 1: Classification system structure (ISO :2009) Termo de Adopção nº2012/ 0855, EN ISO :2012 ( 1ª Edição ) Information technology Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary Part 1: General terms relating to AIDC (ISO/IEC :2008) Termo de Adopção nº2012/ 0856, EN ISO :2012 ( 1ª Edição ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

16 2. Normas Europeias Publicadas 2.1 CEN Normas Europeias aprovadas na área não eletrotécnica pelo Comité Europeu de Normalização (CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS). Para cada referência, menciona-se o comité técnico, a designação codificada e o título. EN 13012:2012 ( Ed. 2 ) Petrol filling stations Construction and performance of automatic nozzles for use on fuel dispensers EN 16224:2012 ( Ed. 1 ) Healthcare provision by chiropractors EN ISO :2012 ( Ed. 1 ) Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements (ISO :2012) TC 19 EN ISO :2012 ( Ed. 2 ) Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 1: Watercontaining fluids (ISO :2012) TC 55 EN ISO 6876:2012 ( Ed. 2 ) Dentistry Root canal sealing materials (ISO 6876:2012) TC 55 EN ISO 13017:2012 ( Ed. 1 ) Dentistry Magnetic attachments (ISO 13017:2012) TC 55 EN ISO 13504:2012 ( Ed. 1 ) Dentistry General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) TC 57 EN 303-5:2012 ( Ed. 2 ) Heating boilers Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kw - Terminology, requirements, testing and marking Gas-fired heating boilers Part 1: General requirements and tests TC 121 CEN ISO/TS :2012 ( Ed. 1 ) Health and safety in welding and allied processes Laboratory method for sampling fume and gases Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS :2012) TC 121 EN ISO 5172:2006 /A 1:2012 ( Ed. 1 ) Gas welding equipment Blowpipes for gas welding, heating and cutting - Specifications and tests Amendment 1 (ISO 5172:2006/Amd 1:2012) TC 121 EN ISO :2012 ( Ed. 2 ) Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding (ISO :2012) TC 122 EN ISO :2008 /A 1:2012 ( Ed. 1 ) Ergonomics of human-system interaction Part 410: Design criteria for physical input devices (ISO :2008/AMD1:2012) TC 124 EN 408-:2010+A1:2012 ( Ed. 1 ) Timber structures Structural timber and glued laminated timber Determination of some physical and mechanical properties TC 127 EN :2012 ( Ed. 2 ) Fire resistance tests Part 1: General Requirements TC 129 EN 572-1:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 1: Definitions and general physical and mechanical properties TC 89 EN ISO :2012 /AC :2012 ( Ed. 1 ) Thermal performance of windows, doors and shutters Calculation of thermal transmittance Part 2: Numerical method for frames Technical Corrigendum 1 (ISO :2012/Cor 1:2012) TC 104 EN 934-3:2009+A1:2012 ( Ed. 1 ) Admixtures for concrete, mortar and grout Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling TC 109 EN :2012 ( Ed. 1 ) TC 129 EN 572-2:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 2: Float glass TC 129 EN 572-3:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 3: Polished wired glass TC 129 EN 572-4:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 4: Drawn sheet glass Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

17 TC 129 EN 572-5:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 5: Patterned glass TC 129 EN 572-6:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass TC 129 EN 572-7:2012 ( Ed. 3 ) Glass in building Basic soda lime silicate glass products Part 7: Wired or unwired channel shaped glass TC 129 EN 572-8:2012 ( Ed. 2 ) Glass in building Basic soda lime silicate glass products Part 8: Supplied and final cut sizes TC 139 CEN/TS 16358:2012 ( Ed. 1 ) Paints and varnishes Coating materials and coating systems for exterior wood Assessment of air inclusions/microfoam in coating films TC 139 CEN/TS 16359:2012 ( Ed. 1 ) Paints and varnishes Coating materials and coating systems for exterior wood Assessment of knot staining resistance of wood coatings TC 139 CEN/TS 16360:2012 ( Ed. 1 ) Paints and varnishes Coating materials and coating systems for exterior wood Assessment of film extensibility by indentation of a coating on a wooden substrate TC 139 EN 927-3:2012 ( Ed. 3 ) Paints and varnishes Coating materials and coating systems for exterior wood Part 3: Natural weathering test TC 139 EN ISO :2012 ( Ed. 2 ) Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium (ISO :2012) TC 139 EN ISO :2012 ( Ed. 1 ) Paints and varnishes Drying tests Part 6: Print-free test (ISO :2012) TC 139 EN ISO 13076:2012 ( Ed. 1 ) Paints and varnishes Lighting and procedure for visual assessments of coatings (ISO 13076:2012) TC 139 EN ISO 13632:2012 ( Ed. 1 ) Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement (ISO 13632:2012) TC 139 EN ISO :2012 ( Ed. 1 ) Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection (ISO :2012) TC 142 EN 860-:2007+A2:2012 ( Ed. 1 ) Safety of woodworking machines One side thickness planing machines TC 142 EN 861-:2007+A2:2012 ( Ed. 1 ) Safety of woodworking machines Surface planing and thicknessing machines TC 151 EN ISO 19432:2012 ( Ed. 3 ) Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements (ISO 19432:2012) TC 153 EN 15861:2012 ( Ed. 1 ) Food processing machinery Smokehouses Safety and hygiene requirements TC 160 EN 795:2012 ( Ed. 2 ) Personal fall protection equipment Anchor devices TC 163 EN 997:2012 /AC :2012 ( Ed. 1 ) WC pans and WC suites with integral trap TC 164 CEN/TR 16355:2012 ( Ed. 1 ) Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption TC 164 CEN/TR 16364:2012 ( Ed. 1 ) Influence of materials on water intended for human consumption Influence due to migration Prediction of migration from organic materials using mathematical modelling TC 164 EN 890:2012 ( Ed. 3 ) Chemicals used for treatment of water intended for human consumption Iron (III) sulfate solution TC 164 EN 16037:2012 ( Ed. 1 ) Chemicals used for treatment of water intended for human consumption Sodium hydrogen sulfate TC 164 EN 16038:2012 ( Ed. 1 ) Chemicals used for treatment of water for swimming pools Sodium hydrogen sulfate TC 164 EN 16056:2012 ( Ed. 1 ) Influence of metallic materials on water intended for human consumption Method to evaluate the passive behaviour of stainless steels TC 170 EN ISO 11987:2012 ( Ed. 2 ) Ophthalmic optics Contact lenses Determination of shelf-life (ISO 11987:2012) TC 172 EN ISO 536:2012 ( Ed. 2 ) Paper and board Determination of grammage (ISO 536:2012) TC 188 EN ISO 9856:2003 /A 1:2012 ( Ed. 1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

18 Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012) TC 197 EN ISO :2012 ( Ed. 1 ) Liquid pumps and installation General terms, definitions, quantities, letter symbols and units Part 1: Liquid pumps (ISO :2012) TC 197 EN ISO :2012 ( Ed. 1 ) Liquid pumps and installation General terms, definitions, quantities, letter symbols and units Part 2: Pumping System (ISO :2012) (ISO 20643:2005/Amd 1:2012) TC 234 CEN/TR :2012 ( Ed. 1 ) Implementation Guide for functional standards prepared by CEN/TC 234 Gas infrastructure Part 1: General TC 237 EN :2012 ( Ed. 1 ) Gas meters Conversion devices Part 2: Energy conversion TC 245 EN :2012 ( Ed. 3 ) Leisure accommodation vehicles Caravans Part 1: Habitation requirements relating to health and safety TC 206 EN ISO :2012 ( Ed. 5 ) Biological evaluation of medical devices Part 12: Sample preparation and reference materials (ISO :2012) TC 207 EN 1728:2012 ( Ed. 2 ) Furniture Seating Test methods for the determination of strength and durability TC 207 EN 16122:2012 ( Ed. 1 ) Domestic and non-domestic storage furniture Test methods for the determination of strength, durability and stability TC 215 EN ISO 8359:2009 /A 1:2012 ( Ed. 1 ) Oxygen concentrators for medical use Safety requirements Amendment 1 (ISO 8359:1996/Amd 1:2012) TC 227 EN :2012 ( Ed. 2 ) Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drainability TC 230 EN 16161:2012 ( Ed. 1 ) Water quality Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples TC 230 EN ISO 10870:2012 ( Ed. 1 ) Water quality Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters (ISO 10870:2012) TC 230 EN ISO :2012 ( Ed. 1 ) Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) (ISO :2012) TC 230 EN ISO :2012 ( Ed. 1 ) Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA) (ISO :2012) TC 231 EN ISO 20643:2008 /A 1:2012 ( Ed. 1 ) Mechanical vibration Hand-held and hand-guided machinery - Principles for evaluation of vibration emission Amendment 1: Accelerometer positions TC 245 EN :2012 ( Ed. 3 ) Leisure accommodation vehicles Motor caravans Part 1: Habitation requirements relating to health and safety TC 245 EN 1647:2012 ( Ed. 3 ) Leisure accommodation vehicles Caravan holiday homes Habitation requirements relating to health and safety TC 245 EN :2012 ( Ed. 3 ) Leisure accommodation vehicles 12 V direct current extra low voltage electrical installations Part 1: Caravans TC 245 EN :2012 ( Ed. 3 ) Leisure accommodation vehicles 12 V direct current extra low voltage electrical installations Part 2: Motor caravans TC 247 EN 14597:2012 ( Ed. 2 ) Temperature control devices and temperature limiters for heat generating systems TC 248 EN :2012 ( Ed. 1 ) Textiles Methods for determination of certain aromatic amines derived from azo colorants Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene TC 248 EN ISO 30023:2012 ( Ed. 1 ) Textiles Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) TC 249 EN ISO :2009 /A 1:2012 ( Ed. 1 ) Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles - Amendment 1 (ISO :2009/Amd 1:2012) TC 249 EN ISO :2012 ( Ed. 2 ) Plastics Epoxy resins Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO :2012) TC 249 EN ISO :2012 ( Ed. 2 ) Plastics Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

19 (ISO :2012) bituminous emulsions using the Redwood No. II Viscometer TC 254 EN 13583:2012 ( Ed. 2 ) Flexible sheets for waterproofing Bitumen, plastic and rubber sheets for roof waterproofing Determination of hail resistance TC 256 EN :2009+A2:2012 ( Ed. 1 ) Railway applications Wheelsets and bogies Non powered axles - Design method TC 256 EN 16028:2012 ( Ed. 1 ) Railway applications Wheel/rail friction management Lubricants for trainborne and trackside applications TC 261 CEN/TR 16353:2012 ( Ed. 1 ) Packaging Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children TC 289 EN ISO :2012 ( Ed. 1 ) Leather Physical and mechanical test methods for the determination of soiling Part 2: Tumbling method (ISO :2012) TC 290 EN ISO :2012 ( Ed. 1 ) Geometrical product specifications (GPS) Surface texture: Areal Part 3: Specification operators (ISO :2012) TC 292 CEN/TS 15862:2012 ( Ed. 1 ) Characterisation of waste Compliance leaching test One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions TC 292 CEN/TS 15863:2012 ( Ed. 1 ) Characterisation of waste Leaching behaviour test for basic characterisation Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions TC 292 CEN/TS 15864:2012 ( Ed. 1 ) Characterisation of waste Leaching behaviour test for basic characterisation Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) TC 327 EN 16277:2012 ( Ed. 1 ) Animal feeding stuffs Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide) TC 327 EN 16278:2012 ( Ed. 1 ) Animal feeding stuffs Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE) TC 327 EN 16279:2012 ( Ed. 1 ) Animal feeding stuffs Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE) TC 336 EN 16345:2012 ( Ed. 1 ) Bitumen and bituminous binders Determination of efflux time of TC CSF01 EN ISO 10209:2012 ( Ed. 2 ) Technical product documentation Vocabulary Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012) TC CSB02 EN ISO 6927:2012 ( Ed. 1 ) Buildings and civil engineering works Sealants Vocabulary (ISO 6927:2012) TC CSM11 EN ISO 2739:2012 ( Ed. 3 ) Sintered metal bushings Determination of radial crushing strength (ISO 2739:2012) TC CSF16 EN ISO 7010:2012 ( Ed. 1 ) Graphical symbols Safety colours and safety signs Registered safety signs (ISO 7010:2011) TC AECMA EN :2012 ( Ed. 2 ) Aerospace series Elements of electrical and optical connection - Test methods Part 307: Salt mist TC AECMA EN :2012 ( Ed. 2 ) Aerospace series Elements of electrical and optical connection - Test methods Part 402: Shock TC AECMA EN 3456:2012 ( Ed. 2 ) Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed Sheet and strip, hot rolled - a <= 6 mm TC AECMA EN :2012 ( Ed. 1 ) Aerospace series Fibres and cables, optical, aircraft use - Test methods Part 405: Low/High temperature bend test TC AECMA EN :2012 ( Ed. 1 ) Aerospace series Fibres and cables, optical, aircraft use - Test methods Part 515: Buffer insertion force TC AECMA EN :2012 ( Ed. 1 ) Aerospace series Fibres and cables, optical, aircraft use - Test methods Part 516: Severe cable bend test TC AECMA EN :2012 ( Ed. 1 ) Aerospace series Fibres and cables, optical, aircraft use - Test methods Part 517: Cable tie clamping test EN 16166:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Determination of adsorbable organically bound halogens (AOX) EN 16167:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) EN 16168:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Determination of total nitrogen using dry combustion method EN 16169:2012 ( Ed. 1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

20 Sludge, treated biowaste and soil Determination of Kjeldahl nitrogen EN 16173:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Digestion of nitric acid soluble fractions of elements EN 16174:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Digestion of aqua regia soluble fractions of elements EN 16179:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Guidance for sample pretreatment TC 10 EN 81-21:2009+A1:2012 ( Ed. 2 ) Safety rules for the construction and installation of lifts Lifts for the transport of persons and goods Part 21: New passenger and goods passenger lifts in existing buildings TC 12 EN ISO 12211:2012 ( Ed. 1 ) Petroleum, petrochemical and natural gas industries Spiral plate heat exchangers (ISO 12211:2012) TC 12 EN ISO 12212:2012 ( Ed. 1 ) Petroleum, petrochemical and natural gas industries Hairpintype heat exchangers (ISO 12212:2012) TC 12 EN ISO :2012 ( Ed. 1 ) Petroleum and natural gas industries Site-specific assessment of mobile offshore units Part 1: Jack-ups (ISO :2012) TC 19 CEN/TR 16389:2012 ( Ed. 1 ) Automotive fuels Paraffinic diesel fuel and blends Background to the parameters required and their respective limits and determination TC 104 EN 450-1:2012 ( Ed. 2 ) Fly ash for concrete Part 1: Definition, specifications and conformity criteria TC 125 EN 846-5:2012 ( Ed. 2 ) Methods of test for ancillary components for masonry Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) TC 125 EN 846-6:2012 ( Ed. 2 ) Methods of test for ancillary components for masonry Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) TC 125 EN 846-7:2012 ( Ed. 2 ) Methods of test for ancillary components for masonry Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) TC 127 EN :2012 ( Ed. 1 ) Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows TC 136 EN 892:2012 ( Ed. 3 ) Mountaineering equipment Dynamic mountaineering ropes Safety requirements and test methods TC 136 EN :2012 ( Ed. 1 ) Mountaineering equipment Braking devices Part 1: Braking devices with manually assisted locking, safety requirements and test methods TC 136 EN :2012 ( Ed. 1 ) Mountaineering equipment Braking devices Part 2: Manual braking devices, safety requirements and test methods TC 139 EN ISO :2012 ( Ed. 1 ) Paints and varnishes Drying tests Part 4: Test using a mechanical recorder (ISO :2012) TC 139 EN ISO :2012 ( Ed. 1 ) Paints and varnishes Drying tests Part 5: Modified Bandow-Wolff test (ISO :2012) TC 150 EN ISO :2012 ( Ed. 2 ) Industrial trucks Safety requirements and verification Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO :2011) TC 154 EN :2012 ( Ed. 1 ) Tests for chemical properties of aggregates Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates TC 164 EN 13752:2012 ( Ed. 3 ) Chemicals used for treatment of water intended for human consumption Manganese dioxide TC 187 EN ISO :2012 ( Ed. 1 ) Monolithic (unshaped) refractory products Part 1: Introduction and classification (ISO :2012) TC 189 EN ISO 10772:2012 ( Ed. 1 ) Geotextiles Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions (ISO 10772:2012) TC 189 EN ISO 10776:2012 ( Ed. 1 ) Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012) TC 191 EN ISO 5923:2012 ( Ed. 1 ) Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide (ISO 5923:2012) TC 198 EN :2012 ( Ed. 1 ) Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 17: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

21 Tissue making machines TC 198 EN :2012 ( Ed. 1 ) Safety of machinery Safety requirements for the design and construction of paper making and finishing machines Part 21: Coating machines TC 202 EN 710-:1997+A1:2010 /AC :2012 ( Ed. 1 ) Safety requirements for foundry moulding and coremaking machinery and plant associated equipment TC 203 EN 12842:2012 ( Ed. 2 ) Ductile iron fittings for PVC-U or PE piping systems Requirements and test methods EN ISO 17556:2012 ( Ed. 2 ) Plastics Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (ISO 17556:2012) TC 255 EN ISO :2012 ( Ed. 1 ) Hand-held non-electric power tools Safety requirements Part 7: Grinders (ISO :2012) TC 260 EN :2012 ( Ed. 3 ) Fertilizers Determination of chelating agents in fertilizers by chromatography Part 2: Determination of Fe chelated by o,o-eddha, o,o-eddhma and HBED by ion pair chromatography TC 217 CEN/TS 16384:2012 ( Ed. 1 ) Synthetic sport systems Leaching test TC 234 EN :2012 ( Ed. 2 ) Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar Part 1: General functional requirements TC 234 EN :2012 ( Ed. 2 ) Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) TC 234 EN :2012 ( Ed. 2 ) Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar Part 4: Specific functional requirements for renovation TC 234 EN 12327:2012 ( Ed. 2 ) Gas infrastructure Pressure testing, commissioning and decommissioning procedures Functional requirements TC 243 EN ISO :2012 ( Ed. 1 ) Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration (ISO :2012) TC 247 EN ISO :2012 ( Ed. 4 ) Building automation and control systems Part 5: Data communication protocol (ISO :2012) TC 248 EN ISO 1140:2012 ( Ed. 2 ) Fibre ropes Polyamide 3-, 4-, 8- and 12-strand ropes (ISO 1140:2012) TC 248 EN ISO 1141:2012 ( Ed. 2 ) Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes (ISO 1141:2012) TC 248 EN ISO 1346:2012 ( Ed. 2 ) Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes (ISO 1346:2012) TC 249 TC 261 EN ISO :2012 ( Ed. 2 ) Pallets for materials handling Flat pallets Part 1: Test methods (ISO :2011) TC 261 EN ISO :2012 ( Ed. 1 ) Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests (ISO :2011) TC 261 EN ISO :2012 ( Ed. 1 ) Pallets for materials handling Flat pallets Part 3: Maximum working loads (ISO :2011) TC 264 EN 14211:2012 ( Ed. 2 ) Ambient air Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence TC 264 EN 14212:2012 ( Ed. 2 ) Ambient air Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence TC 264 EN 14625:2012 ( Ed. 2 ) Ambient air Standard method for the measurement of the concentration of ozone by ultraviolet photometry TC 264 EN 14626:2012 ( Ed. 2 ) Ambient air Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy TC 264 EN ISO :2012 ( Ed. 1 ) Indoor air Part 26: Sampling strategy for carbon dioxide (CO2) (ISO :2012) TC 275 CEN/TS :2012 ( Ed. 1 ) Foodstuffs Detection of food allergens by immunological methods Part 3: Quantitative determination of hazelnut with an enzyme immunoassay using polyclonal antibodies and Lowry protein detection TC 278 EN ISO 17263:2012 ( Ed. 1 ) Intelligent transport systems Automatic vehicle and equipment identification System parameters (ISO 17263:2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

22 TC 287 EN ISO :2012 /AC :2012 ( Ed. 1 ) Geographic information Classification systems Part 1: Classification system structure - Technical Corrigendum 1 (ISO :2009/Cor 1:2012) TC 289 EN ISO 17131:2012 ( Ed. 1 ) Leather Identification of leather with microscopy (ISO 17131:2012) TC 290 EN ISO 13102:2012 ( Ed. 1 ) Geometrical product specifications (GPS) Dimensional measuring equipment: Electronic digital-indicator gauge Design and metrological characteristics (ISO 13102:2012) TC 290 EN ISO :2012 ( Ed. 1 ) Geometrical product specifications (GPS) Filtration Part 21: Linear profile filters: Gaussian filters (ISO :2011) TC 292 EN 15875:2011 /AC :2012 ( Ed. 1 ) Characterization of waste Static test for determination of acid potential and neutralisation potential of sulfidic waste TC 305 EN 14491:2012 ( Ed. 2 ) Dust explosion venting protective systems TC 309 CEN ISO/TS 16179:2012 ( Ed. 1 ) Footwear Critical substances potentially present in footwear and footwear components Determination of organotin compounds in footwear materials (ISO/TS 16179:2012) TC 309 CEN ISO/TS 16186:2012 ( Ed. 1 ) Footwear - Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012) TC 309 EN 14602:2012 ( Ed. 2 ) Footwear Test methods for the assessment of ecological criteria TC 338 CEN/TR 16324:2012 ( Ed. 1 ) Technical report of the interlaboratory study for the determination of Besatz in common wheat, rye and durum wheat TC 338 EN ISO 11747:2012 ( Ed. 1 ) Rice Determination of rice kernel resistance to extrusion after cooking (ISO 11747:2012) TC 346 EN 16085:2012 ( Ed. 1 ) Conservation of Cultural property Methodology for sampling from materials of cultural property General rules TC 346 EN 16095:2012 ( Ed. 1 ) Conservation of cultural property Condition recording for movable cultural heritage TC 346 EN 16096:2012 ( Ed. 1 ) Conservation of cultural property Condition survey and report of built cultural heritage TC 352 CEN ISO/TR 11811:2012 ( Ed. 1 ) Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) TC 364 EN :2006+A1:2012 ( Ed. 1 ) Children's high chairs Part 1: Safety requirements TC 364 EN :2006+A1:2012 ( Ed. 1 ) Children's high chairs Part 2: Test methods TC CSS12 CEN/TR 16388:2012 ( Ed. 1 ) Gas-Specific Environmental Document Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle TC CSS99 EN 15933:2012 ( Ed. 1 ) Sludge, treated biowaste and soil Determination of ph TC CSS99 EN 15934:2012 ( Ed. 1 ) Sludge, treated biowaste, soil and waste Calculation of dry matter fraction after determination of dry residue or water content TC CSS99 EN 15935:2012 ( Ed. 1 ) Sludge, treated biowaste, soil and waste Determination of loss on ignition TC CSS99 EN 15936:2012 ( Ed. 1 ) Sludge, treated biowaste, soil and waste Determination of total organic carbon (TOC) by dry combustion TC AECMA EN :2012 ( Ed. 2 ) Aerospace series Elements of electrical and optical connection - Test methods Part 403: Sinusoidal and random vibration TC AECMA EN 3464:2012 ( Ed. 2 ) Aerospace series Titanium alloy Ti-6Al-4V - Annealed - Plate 6 mm < a <_ 100 mm TC AECMA EN :2012 ( Ed. 2 ) Aerospace series Fibres and cables, optical, aircraft use - Test methods Part 510: Bending test Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

23 2.2 CENELEC Normas Europeias aprovadas na área eletrotécnica pelo Comité Europeu de Normalização Eletrotécnica (CENELEC) Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título. BTTF 69-3 EN 50293:2012 ( Ed. 2 ) Road traffic signal systems - Electromagnetic compatibility SR 15 EN :2004 /A 1:2012 ( Ed. 1 ) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC :2003/A1:2011) SR 32B EN :2009 /A 1:2012 ( Ed. 3 ) Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices (IEC :2009/A1:2012) SR 48B EN :2012 ( Ed. 1 ) Connectors for electronic equipment - Tests and measurements Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses (IEC :2012) TC 13 CLC/TR 50579:2012 ( Ed. 1 ) Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 khz khz TC 17B EN :2012 ( Ed. 3 ) Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters (IEC :2011) TC 17B EN :2003 /A 2:2012 ( Ed. 1 ) Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines (IEC :2003/A2:2011) TC 55 EN :2012 ( Ed. 1 ) Specifications for particular types of winding wires Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1, 600 mm (IEC :2012) TC 55 EN :2012 ( Ed. 1 ) Specifications for particular types of winding wires Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180 (IEC :2012) TC 79 EN :2012 ( Ed. 1 ) Alarm systems - CCTV surveillance systems for use in security applications Part 5-3: Video transmission - Analogue and digital video transmission TC 82 EN 50521:2008 /A 1:2012 ( Ed. 1 ) Connectors for photovoltaic systems - Safety requirements and tests BTWG EN :1999 /A 2:2012 ( Ed. 3 ) Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements (IEC :1999/A2:2012) SC 9XB CLC/TR :2012 ( Ed. 1 ) Railway applications - Rolling stock - Intercommunication between vehicles and train/wayside Part 2: Technical contents os standardization work in the field of intercommunication SC 9XA EN 50239:1999 /CORRIGENDUM /AC/Agu.:2012 ( Ed. 1 ) Railway applications - Radio remote control system of traction vehicle for freight traffic SC 9XC EN 50388:2012 /CORRIGENDUM /AC/Aug:2012 ( Ed. 2 ) Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability SC 31-8 EN 50177:2009 /A 1:2012 ( Ed. 3 ) Stationary electrostatic application equipment for ignitable coating powder - Safety requirements SR 33 EN :2012 ( Ed. 1 ) Coupling capacitors and capacitor dividers Part 1: General rules (IEC :2012) SR 40 EN 60717:2012 ( Ed. 1 ) Method for the determination of the space required by capacitors and resistors with unidirectionalterminators (IEC 60717:2012) SR 46 EN :2012 ( Ed. 1 ) Passive RF and microwave devices, intermodulation level measurement Part 1: General requirements and measuring methods (IEC :2012) SR 48B EN :2012 ( Ed. 3 ) Connectors for electronic equipment - Product requirements Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking (IEC :2012) SR 48B EN :2012 ( Ed. 2 ) Connectors for electronic equipment - Product requirements Part 3-110: Detail specification for shielded, free and fixed connectors Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

24 for data transmission with frequencies up to MHz (IEC :2012) rotating machines (IEC :2012) SR 49 EN :2012 ( Ed. 2 ) Surface acoustic wave (SAW) filters of assessed quality Part 2: Guindance for the use (IEC :2012) SR 49 EN :2012 ( Ed. 2 ) Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections Part 1: Plastic moulded enclosure outlines (IEC :2012) SR 56 EN 61124:2012 ( Ed. 2 ) Reliability testing - Compliance tests for constant failure rate and constant failure intensity (IEC 61124:2012) SR 66 EN :2012 ( Ed. 1 ) Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems (IEC :2012) SR 86C EN :2012 ( Ed. 3 ) Optical amplifiers Part 1: Generic specification (IEC :2012) SR 86C EN :2012 ( Ed. 2 ) Fibre optic sensors Part 1: Generic specification (IEC :2012) SR 89 EN :2012 ( Ed. 3 ) Fire hazard testing Part 4:Terminology concerning fire tests for electrotechnical products (IEC :2012) SR 100 EN 62665:2012 ( Ed. 1 ) Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Texture map for auditory presentation of printed texts (IEC 62665: 2012) SR 105 EN :2012 ( Ed. 2 ) Fuel cell technologies Part 2: Fuel cell modules (IEC :2012) SR 110 EN :2012 ( Ed. 1 ) Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type (IEC :2012) SR 110 EN :2012 ( Ed. 1 ) Plasma display panels Part 2-5: Measuring methods - Acoustic noise (IEC :2012) TC 2 EN :2012 ( Ed. 2 ) Rotating electrical machines Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in TC 2 EN :2012 ( Ed. 1 ) Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 1: General architecture (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 2-1: Wire Train Bus (WTB) (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 2-2: Wire Train Bus conformance testing (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 3-1: Multifunction Vehicle Bus (MVB) (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 3-2: MVB - (Multifuntion Vehicle Bus) conformance testing (IEC :2012) TC 9X EN :2012 ( Ed. 1 ) Electronic railway equipment - Train communication network (TCN) Part 3-3: CANopen Consist Network (CCN) (IEC :2012) TC 17AC EN :2012 ( Ed. 2 ) High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kv up to and including 52 kv (IEC :2012) TC 17AC EN :2012 ( Ed. 2 ) High-voltage switchgear and controlgear Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kv (IEC :2012) TC 26A EN :2012 ( Ed. 4 ) Arc welding equipment Part 1: Welding power sources (IEC :2012) TC 31 EN :2012 ( Ed. 4 ) Explosive atmospheres Part 0: Equipment - General requirements (IEC : 2011, modif) TC 31 EN :2012 ( Ed. 1 ) Explosive atmospheres Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

25 matters (IEC :2011) TC 40XB EN 60440:2012 ( Ed. 1 ) Method of measurement of non-linearity inresistors (IEC 60440:2012) TC 46X EN :2012 ( Ed. 1 ) Communication cables - Specifications for test methods Part 4-16: Environmental test methods - Circuit integrity under fire conditions TC 55 EN :2012 ( Ed. 1 ) Specifications for particular types of winding wires Part 60: Polyester glass fibres wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire, temperature index 155 (IEC :2012) (IEC :2012, modif) TC 61 EN :2012 ( Ed. 4 ) Household an similar electrical appliances - Safety Part 2-79: Particular requirements for high pressure cleaners and steam cleaners (IEC :2012, modif) TC 65CX EN :2010 /A 1:2012 ( Ed. 1 ) Industrial communication networks - High availability automation networks Part 1: General concepts and calculation methods (IEC :2010/A1:2012) TC 78 EN 60900:2012 ( Ed. 3 ) Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. (IEC 60900:2012) TC 55 EN :2012 ( Ed. 2 ) Winding wires - Test methods Part 6: Thermal properties (IEC :2012) TC 61 EN :2003 /A 12:2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances TC 61 EN :2010 /A 11:2012 ( Ed. 5 ) Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers TC 61 EN :2010 /A 11:2012 ( Ed. 4 ) Household and similar electrical appliances - Safety Part 2-13 : Particular requirements for deep fat fryers, frying pans and similar applianes TC 61 EN :2003 /A 11:2012 ( Ed. 2 ) Household and similar electrical appliances - Safety Part 2-65: Particular requirements for air-cleaning appliances TC 61 EN :2012 ( Ed. 5 ) Household and similar electrical appliances - Safety Part 2-67: Particular requirements for floor treatment and floor treatment machines for commercial use (IEC :2012, modif) TC 61 EN :2012 ( Ed. 5 ) Household and similar electrical appliances - Safety Part 2-68: Particular requirements for spray extraction machines for commercial use (IEC :2012, modif) TC 61 EN :2012 ( Ed. 5 ) Household and similar electrical appliances - Safety Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, commercial use (IEC :2012, modif) TC 61 EN :2012 ( Ed. 3 ) Household and similar electrical appliances - Safety Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use TC 79 CLC/TS :2012 ( Ed. 1 ) Alarm systems - Intrusion and hold-up systems Part 11: Hold-up devices TC 79 EN :2011 /CORRIGENDUM /AC/Jul:2012 ( Ed. 1 ) Alarm systems - CCTV surveillance systems for use in security applications Part 5-1: Video transmission - General video transmission performance requirements TC 79 EN :2011 /CORRIGENDUM /AC/Jul:2012 ( Ed. 1 ) Alarm systems - CCTV surveillance systems for use in security applications Part 5-2: IP Video Transmission Protocols TC 79 EN :2012 ( Ed. 2 ) Alarm systems - CCTV surveillance systems for use in security applications Part 7: Application guidelines TC 86A EN :2012 ( Ed. 1 ) Optical fibre cables Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (IEC :2012) TC 86A EN :2012 ( Ed. 2 ) Optical fibre cables Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling (IEC :2012) TC 86A EN :2012 ( Ed. 2 ) Optical fibres cables Part 2-21: Indoor optical fibre cables Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC :2012) TC 86BXA EN :2012 ( Ed. 1 ) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple (IEC :2012) TC 86BXA EN :2012 ( Ed. 2 ) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 20: Type LC connector family (IEC :2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

26 TC 86BXA EN :2012 ( Ed. 1 ) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part : Interface standard for LC connectors with protective housings related to IEC (IEC :2012) TC 86BXA EN :2012 ( Ed. 1 ) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 28: Type LF3 connector family (IEC :2012) TC 209 EN :2012 ( Ed. 1 ) Cable networks for television signals, sound signals and interactive services Part 13-1: Bandwidth expansion for broadcast signal over FTTH system (IEC :2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

27 2.3 CEN/CENELEC Normas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC) Para cada referência, menciona-se a designação codificada e o título. TC 1 EN ISO/IEC 17024:2012 ( Ed. 2 ) Conformity assessment - General requirements for bodies operating certification of persons (ISO/IEC/FDIS 17024:2012) TC 3 EN ISO 13485:2012 /AC Jul: ( Ed. 4 ) Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485: corrigendum 1: 2009) TC 3 EN ISO 14971:2012 ( Ed. 4 ) Medical devices - Application of risk management to medical devices (ISO 14971:2007) JWG EMC EN 16212:2012 ( Ed. 1 ) Energy Efficiency and Savings Calculation, Top-down and Bottom-up Methods TC 1 EN :2012 ( Ed. 1 ) Energy audits Part 1: General requirements Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

28 2.4 ETSI Normas Europeias aprovadas e publicadas no setor das Telecomunicações pelo Instituto Europeu de Normalização para as Telecomunicações (ETSI) Para cada referência, menciona-se a designação codificada e o título. ES :2004 ( V1.2.1 ) Access and Terminals (AT); Short Message Service (SMS) for PSTN/ISDN; Short Message Communication between a fixed network Short Message Terminal Equipment and a Short Message Service Centre EG :2000 ( V1.2.2 ) Telecommunications security; A guide to specifying requirements for cryptographic algorithms EG :1997 ( V1.1.1 ) Human Factors (HF); Definitions, abbreviations and symbols EG :1997 ( V1.1.1 ) Methods for Testing and Specification (MTS); ETSI Standards-making; Technical quality criteria for telecommunications standards EG :1999 ( V1.2.1 ) Methods for Testing and Specification (MTS); Specification of protocols and services; Validation methodology for standards using Specification and Description Language (SDL); Handbook EG :2000 ( V1.3.1 ) Corporate Telecommunication Networks (CN); Standardization plan EG :1998 ( V1.5.2 ) Integrated Services Digital Network (ISDN); Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information elements by terminals supporting ISDN services EG :1998 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for point-to-multipoint call/bearer control; Service Description Language (SDL) validation model EG :1997 ( V1.1.1 ) Human Factors (HF); User interface design principles for the Telecommunications Management Network (TMN) applicable to the "G" Interface EG :1997 ( V1.1.1 ) Corporate Telecommunication Networks (CN); Standardization analysis Part 1: Strategy EG :1997 ( V1.1.1 ) Corporate Telecommunication Networks (CN); Standardization analysis Part 2: Enhanced voice and non-voice services EG :1997 ( V1.1.1 ) Business TeleCommunications (BTC); Cordless Terminal Mobility (CTM); Interworking between private and public networks; General principles EG :1998 ( V1.1.1 ) Terrestrial Trunked Radio (TETRA); Security; Lawful Interception (LI) interface; Feasibility study report EG :1997 ( V1.1.1 ) Universal Personal Telecommunication (UPT); UPT phase 2; Network functionalities for feature interaction EG :1999 ( V1.2.2 ) Speech Processing, Transmission and Quality Aspects (STQ); Overall Transmission Plan Aspects for Telephony in a Private Network EG :1997 ( V1.1.2 ) Telecommunications security; Trusted Third Parties (TTP); Requirements for TTP services EG :2003 ( V1.2.4 ) Methods for Testing and Specification (MTS); Implementation Conformance Statement (ICS) proforma style guide EG :1997 ( V1.1.2 ) Multimedia Terminals and Applications (MTA); End-to-end protocols for multimedia information retrieval services; Application walkthrough in a DAVIC system EG :1999 ( V1.2.3 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information elements Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification EG :1997 ( V1.1.1 ) Network Aspects (NA); Universal Personal Telecommunication (UPT); Phase 2: Architecture and functionalities for interworking EG :1998 ( V1.1.1 ) Intelligent Network (IN); Cordless Terminal Mobility (CTM); IN architecture and functionality for the support of CTM Part 1: CTM phase 1 for single public network case EG :1998 ( V1.1.1 ) Intelligent Network (IN); Cordless Terminal Mobility (CTM); IN Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

29 architecture and functionality for the support of CTM Part 2: CTM interworking between public IN EG :1998 ( V1.1.1 ) Intelligent Network (IN); Cordless Terminal Mobility (CTM); IN architecture and functionality for the support of CTM Part 3: CTM interworking between private networks and public INs EG :1998 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); General terminal requirements for the support of applications by B-ISDN access to B-ISDN at kbit/s and kbit/s EG :1998 ( V1.1.1 ) Human Factors (HF); Human factors issues in Multimedia Information Retrieval Services (MIRS) EG :1998 ( V1.1.1 ) Public Switched Telephone Network (PSTN); Method of rating terminal equipment so that it can be connected in series and/or in parallel to a Network Termination Point (NTP) EG :2000 ( V1.1.3 ) A guide to the application of TBR 21 EG :1998 ( V1.1.2 ) Equipment Engineering (EE); Interworking between Direct Current/Isolated (DC/I) and Direct Current/Common (DC/C) electrical power systems EG :1997 ( V1.1.1 ) Universal Personal Telecommunication (UPT); UPT phase 2; Subscriptions, service profiles and information model EG :1998 ( V1.1.1 ) 2-wire analogue voice band interfaces; Multiple line terminal equipment specific characteristics telecommunication; ALgorithm IDentifiers (ALID) EG :1998 ( V1.1.1 ) Universal Personal Telecommunication (UPT); UPT phase 2; Requirements on information flows and protocols for UPT phase 2 EG :1999 ( V1.1.1 ) Intelligent Network (IN); Number Portability Task Force (NPTF); IN and Intelligence Support for Service Provider Number Portability EG :2009 ( V1.3.2 ) Speech and multimedia Transmission Quality (STQ); Specification and measurement of speech transmission quality Part 1: Introduction to objective comparison measurement methods for one-way speech quality across networks EG :1998 ( V1.1.1 ) Human Factors (HF); Framework for the development, evaluation and selection of graphical symbols EG :1999 ( V1.1.1 ) Methods for Testing and Specification (MTS); Use of SDL in ETSI deliverables; Guidelines for facilitating validation and the development of conformance tests EG :2010 ( V2.2.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the R&TTE Directive EG :1999 ( V1.1.1 ) Hybrid Fibre Coax (HFC) access networks Part 1: Interworking with PSTN, N-ISDN, Internet and digital mobile networks EG :2000 ( V1.2.1 ) Private Integrated Services Network (PISN) EG :1999 ( V1.1.1 ) Terminal support interface for harmonized analogue PSTN terminals EG :2000 ( V1.2.1 ) Public Switched Telephone Network (PSTN); Network Termination Point (NTP) analogue interface; Specification of physical and electrical characteristics at a 2-wire analogue presented NTP for short to medium length loop applications EG :2000 ( V1.4.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Master list of codepoints and operation values EG :2006 ( V1.3.1 ) User requirements; Guidelines on the consideration of user requirements when managing the standardization process EG :1999 ( V1.2.1 ) EG :1997 ( V1.1.1 ) Integrated Circuit Cards (ICC); ETSI numbering system for EG :2000 ( V1.1.1 ) Human Factors (HF); Usability evaluation for the design of telecommunication systems, services and terminals EG :1999 ( V1.1.1 ) Intelligent Network (IN); Security studies for Cordless Terminal Mobility (CTM) EG :2000 ( V1.2.2 ) Intelligent Network (IN); IN architecture and functionality for the support of Cordless Terminal Mobility (CTM) Phase 2+; Feature Package 2 (FP2) - Cordless Terminal Mobility (CTM) Point-to-Point (PP) Point to point Short Message Service (SMS) EG :1999 ( V1.1.3 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Master list of codepoints EG :1999 ( V1.1.2 ) Intelligent Network (IN); IN architecture and functionality for the support of Cordless Terminal Mobility (CTM) phase 2 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

30 EG :2000 ( V1.4.3 ) Universal Mobile Telecommunications System (UMTS); Virtual Home Environment (VHE) in the Integrated Services Digital Network (ISDN); Evolved UMTS core network EG :1999 ( V1.1.2 ) Universal Mobile Telecommunications System (UMTS); Mobility Management for evolved fixed networks Part 1: Phase 1 EG :2000 ( V1.1.5 ) Universal Mobile Telecommunications System (UMTS); Framework for IMT2000 networks [ITU-T Recommendation Q.1701] EG :2000 ( V1.1.5 ) Universal Mobile Telecommunications System (UMTS); Network Functional Model for IMT2000 networks [ITU-T Recommendation Q.1711] EG :2000 ( V1.1.2 ) Universal Mobile Telecommunications System (UMTS); Strategies EG :2000 ( V12.2 ) Intelligent Network (IN); Service provider access requirements; Enhanced telephony services EG :2001 ( V1.2.1 ) Fixed Radio Systems; Point-to-Point and Point-to-Multipoint Equipment and Antennas; Identification of European standards (EN), applicable to fixed radio systems, for the essential requirements under the article 3.1 of the 1999/5/EC Directive EG :2009 ( V2.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Guidance for drafting an ETSI System Reference document (SRdoc) EG :2001 ( V1.2.1 ) Methods for Testing and Specification (MTS); Methodological approach to the use of object-orientation in the standards making process EG :2002 ( V1.2.1 ) Services and Protocols for Advanced Networks (SPAN); Service Provider Access; Service Provider Access Requirements in a Fixed and Mobile Environment EG :2001 ( V1.1.1 ) Services and Protocols for Advanced Networks (SPAN); Service Provider Access; Development of standards to support Open Inter-Network Interfaces and Service Provider Access Provider Access Requirements (SPAR); Open Service Access for API requirements Part 1: Version 1 EG :2001 ( V1.1.1 ) Services and Protocols for Advanced Networks (SPAN); Intelligent Networks (IN); Architectures and signalling requirements for IN-based networks interworking with IP-based networks EG :2007 ( V1.2.1 ) User Group; Quality of telecom services Part 1: Methodology for identification of parameters relevant to the Users EG :2007 ( V1.2.1 ) User Group; Quality of telecom services Part 2: User related parameters on a service specific basis EG :2007 ( V1.1.1 ) User Group; Quality of telecom services Part 3: Template for Service Level Agreements (SLA) EG :2002 ( V1.1.1 ) Universal Communications Identifier (UCI); System framework EG :2002 ( V1.1.1 ) Universal Communications Identifier (UCI); Placing UCI in context; Review and analysis of existing identification schemes EG :2008 ( V2.0.0 ) Speech Processing, Transmission and Quality Aspects (STQ); Objectives and principles for the transmission performance of multiple interconnected networks that aim to provide "traditional quality" telephony services EG :1999 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN); H.323/B-ISDN signalling interoperability EG :2001 ( V1.2.2 ) Private Integrated Services Network (PISN); Service profiles of mobile PISN users; General requirements EG :1999 ( V1.1.1 ) Methods for Testing and Specification (MTS); Guide for the use of the second edition of TTCN EG :2003 ( V2.1.1 ) Methods for Testing and Specification (MTS); Guidelines for the use of formal SDL as a descriptive tool EG :2001 ( V1.1.1 ) Services and Protocols for Advanced Networks (SPAN); Service Provider Access; Service Provider Access Management Requirements for Open Network Access EG :2002 ( V1.1.1 ) Services and Protocols for Advanced Networks (SPAN); Service EG :1999 ( V1.1.1 ) Methods for Testing and Specification (MTS); Planning for validation and testing in the standards-making process EG :1998 ( V1.2.1 ) Transmission and Multiplexing (TM); Access networks for residential customers Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

31 EN :2003 ( V1.3.2 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Message Transfer Part (MTP) to support international interconnection Part 1: Protocol specification [ITU-T Recommendations Q.701, Q.702, Q.703, Q.704, Q.705, Q.706, Q.707 and Q.708 modified] EN :2001 ( V1.4.3 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling Connection Control Part (SCCP) (connectionless and connection-oriented) to support international interconnection Part 1: Protocol specification [ITU-T Recommendations Q.711 to Q.716 (1996), modified] EN :2002 ( V1.4.1 ) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); Signalling Connection Control Part (SCCP) (connectionless and connection-oriented class 2) to support international interconnection Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2000 ( V1.2.2 ) Integrated Services Digital Network (ISDN); Primary rate User Network Interface (UNI) Part 1: Layer 1 specification EN :2001 ( V1.3.1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Float-free maritime satellite Emergency Position Indicating Radio Beacons (EPIRBs) operating in the 406,0 MHz to 406,1 MHz frequency band; Technical characteristics and methods of measurement EN :2000 ( V2.1.1 ) Integrated Services Digital Network (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Service description EN :2000 ( V3.1.1 ) Integrated Services Digital Network (ISDN); Calling Line Identification Presentation (CLIP) supplementary service; Service description EN :2002 ( V1.3.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Presentation (CLIP) supplementary service Part 4: Abstract Test Suite (ATS) and partial Protocol Implemlentation extra Information for Testing (PIXIT) proforma specification for the user EN :2002 ( V1.4.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Presentation (CLIP) supplementary service Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2002 ( V1.3.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Restriction (CLIR) supplementary service Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2002 ( V1.4.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Restriction (CLIR) supplementary service Part 6: Abstarct Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2000 ( V2.1.1 ) Integrated Services Digital Network (ISDN); Connected Line Identification Presentation (COLP) supplementary service; Service description EN :2000 ( V1.2.4 ) Integrated Services Digital Network (ISDN);Diversion supplementary services;digital Subscriber Signalling System No. one (DSS1) protocol Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2001 ( V3.1.1 ) Integrated Services Digital Network (ISDN);Diversion supplementary services;digital Subscriber Signalling System No. one (DSS1) protocol Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2001 ( V3.1.1 ) Integrated Services Digital Network (ISDN);Diversion supplementary services;digital Subscriber Signalling System No. one (DSS1) protocol Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :2000 ( V1.2.3 ) Integrated Services Digital Network (ISDN);Diversion supplementary services;digital Subscriber Signalling System No. one (DSS1) protocol Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2003 ( V3.2.1 ) Integrated Services Digital Network (ISDN);Diversion supplementary services;digital Subscriber Signalling System No. one (DSS1) protocol Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2001 ( V2.0.1 ) Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;b-isdn user-network interface layer 3 specification for basic call/bearer control Part 1: Protocol specification [ITU-T Recommendation Q.2931 (1995), modif] EN :2000 ( V8.1.1 ) Digital cellular telecommunications system (Phase 2+); Enhanced Full Rate (EFR) speech processing functions; General description Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

32 (GSM version Release 1999) EN :2000 ( V7.1.1 ) Digital cellular telecommunications system (Phase 2+); Enhanced Full Rate (EFR) speech processing functions; General description (GSM version Release 1998) EN :2000 ( V6.1.1 ) Digital cellular telecommunications system (Phase 2+); Enhanced Full Rate (EFR) speech processing functions; General description (GSM version Release 1997) EN :1999 ( V6.0.1 ) Digital cellular telecommunications system (Phase 2+); ANSI-C code for the GSM Enhanced Full Rate (EFR) speech codec (GSM version Release 1997) EN :2000 ( V7.0.1 ) Digital cellular telecommunications system (Phase 2+); ANSI-C code for the GSM Enhanced Full Rate (EFR) speech codec (GSM version Release 1998) EN :2000 ( V8.0.1 ) Digital cellular telecommunications system (Phase 2+); ANSI-C code for the GSM Enhanced Full Rate (EFR) speech codec (GSM version Release 1999) EN :1999 ( V6.0.1 ) Digital cellular telecommunications system (Phase 2+) (GSM);Full rate speech;processing functions (GSM version Release 1997) EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+); Full rate speech; Processing functions (GSM version Release 1998) EN :2000 ( V8.0.1 ) Digital cellular telecommunications system (Phase 2+); Full rate speech; Substitution and muting of lost frames for full rate speech channels (GSM version Release 1999) EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 1: Protocol specification EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :1999 ( V6.0.1 ) Digital cellular telecommunications system (Phase 2+); Substitution and muting of lost frames for Enhanced Full Rate (EFR) speech traffic channels (GSM version Release 1997) EN :2000 ( V7.0.1 ) Digital cellular telecommunications system (Phase 2+); Substitution and muting of lost frames for Enhanced Full Rate (EFR) speech traffic channels (GSM version Release 1998) EN :2000 ( V8.0.1 ) Digital cellular telecommunications system (Phase 2+); Substitution and muting of lost frames for Enhanced Full Rate (EFR) speech traffic channels (GSM version Release 1999) EN :2000 ( V7.0.1 ) Digital cellular telecommunications system (Phase 2+); Comfort noise aspects for Enhanced Full Rate (EFR) speech traffic channels (GSM version Release 1998) EN :2000 ( V6.1.1 ) Digital cellular telecommunications system (Phase 2+); Discontinuous Transmission (DTX) for Enhanced Full Rate (EFR) speech traffic channels (GSM version Release 1997) EN :1999 ( V6.0.1 ) Digital cellular telecommunications system (Phase 2+); In-band control of remote transcoders and rate adaptors for Enhanced Full Rate (EFR) and full rate traffic channels (GSM version Release 1997) EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Outgoing Call Barring (OCB) supplementary services. Digital Subscriber Signalling System No. one (DSS1) protocol Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2001 ( V1.3.1 ) Integrated Services Digital Network (ISDN). Security tools (SET) procedures. Digital Subscriber Signalling System No. one (DSS1) protocol Part 1: Protocol specification EN :2001 ( V1.3.1 ) Integrated Services Digital Network (ISDN). Security tools (SET) procedures. Digital Subscriber Signalling System No. one (DSS1) protocol Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

33 EN :2001 ( V1.2.1 ) Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :2001 ( V1.2.1 ) Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2001 ( V1.2.1 ) Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :1998 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection Part 1: Protocol specification [ITU-T Recommendation Q.2210 (1996), modified] EN :2000 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; Message Transfer Part (MTP) level 3 functions and messages to support international interconnection; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2001 ( V1.2.1 ) Integrated Services Digital Network (ISDN); Security tools (SET) procedures; Digital Subscriber Signalling System No. one (DSS1) protocol Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :1999 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 1: Protocol specification [ITU-T Recommendation Q (1996), modified] EN :1999 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2000 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :2000 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2000 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Peak cell rate modification by the connection owner Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :2000 ( V1.2.1 ) EN :1998 ( V1.1.4 ) V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) Part 1: Interface specification EN :1998 ( V1.1.5 ) V interfaces at the digital Service Node (SN); Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2000 ( V1.1.2 ) V interfaces at the digital Service Node (SN). Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2000 ( V1.1.2 ) V interfaces at the digital Service Node (SN). Interfaces at the VB5.1 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification EN :1998 ( V1.2.3 ) Q3 interface at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) subscriber lines Part 1: Q3 interface specification EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Operations, Maintenance and Administration Part (OMAP) Part 1: Protocol specification EN :2000 ( V1.2.3 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Operations, Maintenance and Administration Part (OMAP) Part 2: Protocol Implementation Conformance Statment (PICS) proforma specification Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

34 EN :1998 ( V1.1.2 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Signalling Connection Control Part (SCCP); Interoperability test specification EN :1998 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers operating in the maritime mobile service EN :2003 ( V1.6.1 ) Fixed Radio Systems; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz EN :1998 ( V1.1.1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Technical characteristics and methods of measurement for VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC) EN :1998 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; B-ISDN User Part (B-ISUP); Part 1: Overview of the B-ISDN network node interface signalling capability set 2, step 1 [ITU-T Recommendation Q (1996)] EN :1998 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Part 2: Network node interface specification for point-to-multipoint call/connection control [ITU-T Recommendation Q (1996)] EN :1998 ( V1.2.3 ) Broadband Integrated Services Digital Network (B-ISDN);Signalling System No.7.B-ISDN User Part (B-ISUP) Part 3: Support of additional traffic parameters for Statistical Bit Rate (SBR), Available Bit Rate (ABR), ATM Block Transfer (ABT) and Quality of Service (QoS) [ITU-T Recommendations Q (1996), Q (1997), Q (1997) and Q (1997) EN :1998 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Part 4: Look-ahead without state change for the network node interface [ITU-T Recommendation Q (1996)] EN :1998 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Part 5: Support of negotiation during connection setup [ITU-T Recommendation Q (1996) EN :1998 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Part 6: Modification procedures [ITU-T Recommendation Q (1996) EN :1998 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; B-ISDN User Part (B-ISUP) Part 7: ATM end system address [ITU-T Recommendation Q (1996)] EN :1998 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No. 7. B-ISDN User Part (B-ISUP) Part 9: Network generated session identifier [ITU-T Recommendation Q (1996)] EN :1998 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN). Signalling System No.7. B-ISDN User Part (B-ISUP) Part 10: Support of frame relay [ITU-T Recommendation Q.2727 (1996)] EN :2002 ( V1.2.1 ) Private Integrated Services Network (PISN); Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing [ISO/IEC (2002) modified EN :1997 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional models and information flows; Transit counter additional network feature [ISO/IEC 15055(1997) modified] EN :1997 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Transit counter additional network feature [ISO/IEC (1997) modified] EN :1997 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional models and information flows; Circuit-mode multi-rate bearer services [ISO/IEC (1996) modified] EN :2001 ( V1.4.1 ) Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence Code Division Multiple Access (DS-CDMA); Point-to-multipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz EN :1998 ( V1.2.2 ) IIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 1: Protocol specification EN :1998 ( V1.1.3 ) IIntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

35 EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Basic call control; Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Basic call control. Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Basic call control. Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Basic call control. Enhancement at the "b" service entry point for Virtual Private Network (VPN) applications Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional protocol for the support of point for Virtual Private Network (VPN) applications Part 1: Protocol specification EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications Part 2: Protocol Implementation Conformace Statement (PICS) proforma specification EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :1999 ( V1.1.2 ) Telecommunications Management Network (TMN);Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM) switching network element Part 1: Q3 interface specification EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Completion of Calls on No Reply (CCNR) supplementary service. Digital Subscriber Signalling System No. one (DSS1) protocol Part 1: Protocol specification EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Completion of Calls on No Reply (CCNR) supplementary service. Digital Subscriber Signalling System No. one (DSS1) protocol Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Completion of Calls on No Reply (CCNR) supplementary service. Digital Subscriber Signalling System No. one (DSS1) protocol Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :2002 ( V1.2.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR) supplementary service Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2002 ( V1.2.1 ) Integrated Services Digital network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR) supplementary service Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :1999 ( V1.1.4 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional protocol for the support of supplementary services at the "b" service entry point for Virtual Private Network (VPN) applications Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :1998 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Digital Subscriber Signalling System No. one (DSS1) protocol. Generic functional EN :2002 ( V1.3.1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Completion of Calls on No Reply (CCNR) supplementary service Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :1999 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase Part 1: Protocol specification Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

36 [ITU-T Recommendation Q.2962 (1996), modified] EN :1999 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2000 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :1999 ( V1.1.3 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase Part 4: Abstract Test Suite (ATS) and partial Protocol Implementations extra Information for Testing (PIXIT) proforma specification for the user EN :2000 ( V2.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementations extra Information for Testing (PIXIT) proforma specification for the user EN :2000 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :2000 ( V2.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; Negotiation during call/connection establishment phase; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network characteristics; ATM transfer capability and traffic parameter indication Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :2002 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2002 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :2002 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2001 ( V1.3.1 ) Integrated Services Digital Network (ISDN). Signalling System No.7 (SS7). ISDN User Part (ISUP); Application transport mechanism Part 1: Protocol specification [ITU-T Recommendation Q.765, modified] EN :2000 ( V1.1.3 ) Integrated Services Digital Network (ISDN). Signalling System No.7. ISDN User Part (ISUP). Application transport mechanism Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :1998 ( V1.2.2 ) Integrated Services Digital Network (ISDN). Signalling System No.7. ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP) Part 1: Protocol specification [ITU-T Recommendation Q.1600 (1997), modified] EN :2002 ( V1.3.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication Part 1: Protocol specification [ITU-T Recommendations Q (1995), Q (1997), Q (1997), Q (1997) and Q (1997), modified] EN :2002 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2002 ( V1.2.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection EN :2000 ( V1.1.2 ) Integrated Services Digital Network (ISDN). Signalling System No.7. ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP) Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2000 ( V1.1.2 ) Integrated Services Digital Network (ISDN). Signalling System No.7. ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP) Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2000 ( V1.1.2 ) Integrated Services Digital Network (ISDN). Signalling System No.7 (SS7). ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP) Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

37 for Testing (PIXIT) proforma specification EN :2001 ( V1.3.1 ) Fixed Radio Systems; Point-to-multipoint equipment; Frequency Division Multiple Access (FDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz EN :1998 ( V1.1.1 ) Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed (OCB-F) supplementary service; Service description EN :2000 ( V2.1.1 ) Integrated Services Digital Network (ISDN); Outgoing Call Barring-Fixed (OCB-F) supplementary service; Service description EN :1998 ( V1.1.1 ) Integrated Services Digital Network (ISDN); Outgoing Call Barring-User Controlled (OCB-UC) supplementary service; Service description EN :2000 ( V2.1.1 ) Integrated Services Digital Network (ISDN); Outgoing Call Barring-User Controlled (OCB-UC) supplementary service; Service description EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+) (GSM); Subscriber Identity Module (SIM) conformance test specification (GSM version Release 1998) EN :1999 ( V5.4.1 ) Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM version 5.4.1) EN :2000 ( V7.2.1 ) Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM version Release 1998) EN :2000 ( V8.2.1 ) Digital cellular telecommunications system (Phase 2 and Phase 2+) (GSM); Base Station System (BSS) equipment specification; Radio aspects (GSM version Release 1999) EN :1998 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for maritime radiotelephone watch receivers operating on khz EN :1998 ( V1.1.1 ) Telecommunications Management Network (TMN); Scheduling function; Support object classes EN :2012 ( V1.1.2 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to MHz Part 1: Technical characteristics and test methods EN :2012 ( V1.1.2 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) operating in the frequency range 2 483,5 MHz to MHz Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN :2000 ( V1.1.1 ) Digital Audio Broadcasting (DAB); VHF/FM Broadcasting: cross-referencing to simulcast DAB services by RDS-ODA 147 EN :2000 ( V1.1.1 ) Digital Video Broadcasting (DVB); OFDM modulation for microwave digital terrestrial television EN :1999 ( V7.1.2 ) Digital cellular telecommunications system (Phase 2+); User-to-User Signalling (UUS); Service description, Stage 1 (GSM version Release 98) EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+) (GSM);Adaptive Multi-Rate (AMR);Speech processing functions;general description (GSM version Release 1998) EN :2000 ( V7.2.1 ) Digital cellular telecommunications system (Phase 2+); Adaptive Multi-Rate (AMR) speech transcoding (GSM version Release 1998) EN :2000 ( V7.1.1 ) Digital cellular telecommunications system (Phase 2+); Substitution and muting of lost frames for Adaptive Multi Rate (AMR) speech traffic channels (GSM version Release 1998) EN :1999 ( V7.1.1 ) Digital cellular telecommunications system (Phase 2+); Comfort noise aspects for Adaptive Multi-Rate (AMR) speech traffic channels (GSM version Release 1998) EN :2000 ( V7.4.1 ) Digital cellular telecommunications system (Phase 2+) (GSM); Discontinuous Transmission (DTX) for Adaptive Multi-Rate (AMR) speech traffic channels (GSM version Release 1998) EN :1999 ( V7.1.1 ) Digital cellular telecommunications system (Phase 2+) (GSM); Voice Activity Detection (VAD) for Adaptive Multi-Rate (AMR) speech traffic channels; General description (GSM version Release 1998) EN :2000 ( V7.2.1 ) Digital cellular telecommunications system (Phase 2+) (GSM); Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

38 Link Adaptation (GSM version Release 1998) EN :2000 ( V8.0.1 ) Digital cellular telecommunications system (Phase 2+) (GSM); Link Adaptation (GSM version Release 1999) EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+) (GSM); User-to-User Signalling (UUS); Stage 2 (GSM version Release 1998) EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+); User-to-User Signalling (UUS); Stage 3 (GSM version Release 1998) EN :2000 ( V7.4.1 ) Digital cellular telecommunications system (Phase 2+) (GSM); Adaptive Multi Rate (AMR) speech; ANSI-C code for the AMR speech codec (GSM version Release 1998) EN :2003 ( V1.2.1 ) Fixed Radio Systems; Multipoint equipment and antennas; Generic harmonized standard for multipoint digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the Directive 1999/5/EC EN :2001 ( V1.1.1 ) Telecommunications Management Network (TMN); Management interfaces associated with the VB5.2 reference point EN :2000 ( V1.1.1 ) Private Integrated Services Network (PISN); Functional requirements for static circuit-mode inter-pinx connections [ISO/IEC (1998) modified] EN :2003 ( V1.2.1 ) Digital Video Broadcasting (DVB); Specification for the carriage of Vertical Blanking Information (VBI) data in DVB bitstreams EN :2000 ( V1.1.1 ) Broadband Private Integrated Services Network (B-PISN); Inter-exchange signalling protocol; Separated Bearer Control (SBC) EN :2000 ( V7.0.3 ) Digital cellular telecommunications system (Phase 2+); Test sequences for the Adaptive Multi-Rate (AMR) speech codec (GSM version Release 1998) EN :1999 ( V7.0.2 ) Digital cellular telecommunications system (Phase 2+) (GSM); Support of Mobile Number Portability (MNP); Service description; Stage 1 (GSM version Release 1998) EN :2000 ( V7.3.1 ) Digital cellular telecommunications system (Phase 2+); Support of Mobile Number Portability (MNP); Technical Realisation; Stage 2 (GSM version Release 1998) EN :2001 ( V1.2.1 ) Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz covering essential requirements under article 3.2 of the R&TTE directive EN :2001 ( V1.2.1 ) Fixed Radio Systems; Point-to-multipoint equipment; Direct Sequence Code Division/Time Division Multiple Access (DS-CD/TDMA); Point-to-multipoint digital packet radio systems in frequency bands in the range 3 GHz to 11 GHz EN :2002 ( V1.2.1 ) Fixed Radio Systems; Point-to-Point equipments and antennas; Generic harmonized standard for Point-to-Point digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive EN :2002 ( V1.2.1 ) Fixed Radio Systems; Point-to-point packet data equipment; Parameters for radio systems with packet data interfaces for transmission of digital signals operating in the frequency range 7, 8, 13, 15, 18, 23, 26, 28, 32, 38, 52 to 55 GHz EN :2001 ( V1.2.1 ) Fixed Radio Systems; Point-to-point equipment; Parameters for digital radio systems for the transmission of digital signals operating at 52 GHz EN :2001 ( V1.1.1 ) Fixed Radio Systems; Point-to-Point equipment; Parameters for radio systems for the transmission of Sub-STM-0 digital signals operating in the 18 GHz frequency band EN :2009 ( V1.5.1 ) Digital Video Broadcasting (DVB); Interaction channel for satellite distribution systems EN :2000 ( V1.1.1 ) Electromagnetic compatibility and Radio Spectrum Matters (ERM); Harmonized EN for CT1 and CT1+ cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive EN :2000 ( V1.1.1 ) Electromagnetic compatibility and Radio Spectrum Matters (ERM); Harmonized EN for CT2 cordless telephone equipment covering essential requirements under article 3.2 of the R&TTE directive EN :2000 ( V1.1.1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

39 Service and Protocols for Advanced Networks (SPAN); Anonymous Call Rejection (ACR) Supplementary Service; Service description EN :2004 ( V1.2.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private User Mobility (PUM); Call handling Additional Network Feature (ANF) [ISO/IEC (2003), modified] EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer Part 1: Common part Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma EN :2000 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service Class and Parameters indication at call/connection establishment Part 1: Protocol specification [ITU-T Recommendations Q (1999) and Q (1999), modified] EN :2002 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification [ITU-T Recommendations Q B (2000) and Q B (2000), modified] EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer Part 1: Common part Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the packet based convergence layer Part 1: Common part Sub-part 3: Abstract Test Suite (ATS) specification EN :2000 ( V1.1.1 ) Integrated Services Digital Network (ISDN) and Broadband Integrated Services Digital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol Part 1: Protocol specification [ITU-T Recommendation Q.860 (2000), modified] EN :2001 ( V1.1.1 ) Integrated Services Digital Network (ISDN) and Broadband Integrated Services Digital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2002 ( V1.1.1 ) Integrated Services Digital Network (ISDN) and Broadband Integrated Services Digital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2002 ( V1.1.1 ) Integrated Services Digital Network (ISDN) and Broadband Integrated Services Digital Network (B-ISDN); Generic Addressing and Transport (GAT) protocol Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification EN :2002 ( V1.2.2 ) ETSI endorsement of ATM Inter-Network Interface (AINI) signalling specification [ATM Forum Specification ATM Inter-Network Interface (AINI) F-CS (1999), modified] EN :2000 ( V1.1.1 ) ETSI endorsement of ATM inter-network interface (AINI) signalling specification Part 1: Protocol specification [ATM Forum Specification ATM Inter-Network Interface (AINI) F-CS (1999), modified] EN :2002 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user EN :2002 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user EN :2002 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network EN :2002 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the network EN :2000 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); AAL Type 2 Signalling protocol; Capability Set 1 Part 1: Protocol specification [ITU-T Recommendation Q (1999), modified] EN :2001 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); AAL Type 2 Signalling protocol; Capability Set 1; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification EN :2001 ( V1.1.1 ) Broadband Integrated Services Digital Network (B-ISDN); AAL Type 2 Signalling protocol; Capability Set 1; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

40 EN :2002 ( V1.1.2 ) Broadband Integrated Services Digital Network (B-ISDN); AAL Type 2 Signalling Protocol; Capability Set 1 Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification EN :2000 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional models and information flows; Common information Additional Network Feature (ANF) [ISO/IEC (1998), modified] EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 2: Radio Link Control (RLC) sublayer Sub-part 3: Abstract Test Suite (ATS) specification EN :2003 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal location registration supplementary service and wireless terminal information exchange additional network feature [ISO/IEC (1999) modified] EN :2004 ( V1.2.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Common information Additional Network Feature (ANF [ISO/IEC (2003), modified EN :2004 ( V1.2.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Private User Mobility (PUM); Registration supplementary service [ISO/IEC (2003), modified] EN :2000 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional models and information flows; Private User Mobility (PUM); Registration supplementary service [ISO/IEC (2000), modified] EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 1: Basic data transport function Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 1: Basic data transport function Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 1: Basic data transport function Sub-part 3: Abstract Test Suite (ATS) specification EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 2: Radio Link Control (RLC) sublayer; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma EN :2001 ( V1.1.1 ) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol Part 2: Radio Link Control (RLC) sublayer Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Wireless terminal location registration supplementary service and wireless terminal information exchange Additional Network Feature (ANF) [ISO/IEC (2003), modified] EN :2003 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal call handling additional network features [ISO/IEC (1999) modified] EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Wireless terminal call handling Additional Network Feature (ANF) [ISO/IEC (2003), modified] EN :2003 ( V1.1.1 ) Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal authentication supplementary servic [ISO/IEC (1999) modified] EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Wireless terminal authentication supplementary service [ISO/IEC (2003), modified] EN :2001 ( V1.1.1 ) Electromagnetic compatibility and Radio Spectrum Matters (ERM); Digital radio microphones operating in the CEPT Harmonized band MHz to MHz Part 1: Technical characteristics and methods of measurement EN :2001 ( V1.1.1 ) Electromagnetic compatibility and Radio Spectrum Matters (ERM); Digital radio microphones operating in the CEPT Harmonized band MHz to MHz Part 2: Harmonized EN under article 3.2 of the R&TTE Directive EN :2004 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment Part 2: Upper layers EN :2001 ( V1.1.1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

41 Private Integrated Services Network (PISN); Profile Standard for the use of PSS1 (QSIG) in Air Traffic Services networks EN :2001 ( V1.1.1 ) Integrated Service Digital Network (ISDN) Signalling System No.7 (SS7); Bearer Independent Call Control (BICC); Signalling procedures in an ATM/IP/.. backbone network; Capability Set 1 (CS1) Part 1: Protocol specification [ITU-T Recommendations Q.1901 and Q.765.5, modified] EN :2004 ( V1.1.1 ) Corporate telecommunication Networks (CN); Signalling interworking between QSIG and H.323; Call transfer supplementary service [ISO/IEC (2001), modified] EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Use of QSIG at the C reference point between a PINX and an interconnecting network [ISO/IEC (2001), modified] EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Single step call transfer supplementary service [ISO/IEC (2003), modified] EN :2004 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 khz to 315 khz for ultra low power active medical implants (ULP-AMI) and accessories Part 1: Technical characteristics and test methods EN :2004 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 9 khz to 315 khz for ultra low power active medical implants (ULP-AMI) and accessories Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive EN :2004 ( V1.1.2 ) Services and Protocols for Advanced Networks (SPAN); Bearer Independent Call Control (BICC) Capability Set 2 (CS2); Protocol specification [ITU-T Recommendations Q , Q , Q , Q , Q , Q , Q Amendment 1, Q , Q , Q , Q , Q , Q.1950, Q.1970, Q.1990, Q , Q , Q , Q , modified] EN :2008 ( V1.1.2 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar for use on non-solas vessels; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Simple dialog supplementary service [ISO/IEC (2003), modified] EN :2004 ( V1.1.1 ) Private Integrated Services Network (PISN); Inter-exchange signalling protocol; Call identification and call linkage Additional Network Feature (ANF) [ISO/IEC (2001), modified] EN :2004 ( V1.1.2 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band Part 1: Technical characteristics and methods of measurement EN :2004 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band Part 2: Harmonized EN under article 3.2 of the R&TTE Directive EN :2005 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service Part 1: Technical characteristics and test methods EN :2004 ( V1.1.1 ) Satellite Earth Stations and Systems (SES); Harmonized EN for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive EN :2005 ( V1.1.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the analogue television broadcasting service; Harmonized EN under article 3.2 of the R&TTE Directive EN :2004 ( V1.1.1 ) Digital Video Broadcasting (DVB); Transmission System for Handheld Terminals (DVB-H) EN :2007 ( V1.1.1 ) Satellite Earth Stations and Systems (SES); Harmonized EN for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive EN :2008 ( V1.1.2 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for the GSM onboard aircraft system covering essential requirements of Article 3.2 of the R&TTE Directive ES :1999 ( V1.2.1 ) Telecommunications Management Network (TMN); Network level generic class library ES :1999 ( V1.1.1 ) Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT) Part 1: Technical characteristics and test methods for High Data Rate (HDR) data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) band ES :1999 ( V1.1.1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT) Part 2: Technical characteristics and test methods for Low Data Rate (LDR) data transmission equipment operating in the 5,8 GHz Industrial, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

42 Scientific and Medical (ISM) band ES :1998 ( V1.2.1 ) Public Switched Telephone Network (PSTN); Requirements for handset telephony ES :2002 ( V1.1.2 ) Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the Local loop for display and related services; Terminal equipment requirements Part 3: Protocol Implementation Conformance Statement (PICS) proforma specification; On-Hook and Off-Hook ES :2002 ( V1.1.2 ) Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal equipment requirements Part 4: Test Suite Structure and Test Purposes (TSS&TP); On-Hook and Off-Hook ES :2002 ( V ) Access and Terminals (AT); Analogue access to the Public Switched Telephone Network (PSTN); Protocol over the local loop for display and related services; Terminal equipment requirements Part 5: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user; On-Hook and Off-Hook ES :2002 ( V1.2.1 ) Telecommunications security; Lawful Interception (LI); Requirements for network functions ES :2000 ( V1.2.1 ) Speech Processing, Transmission and Quality Aspects (STQ); Transmission characteristics of digital Private Branch exchanges (PBXs) for interconnection to private networks, to the public switched network or to IP gateways ES :1999 ( V1.1.1 ) 2-wire analogue voice band interfaces; Loop Disconnect (LD) dialling specific requirements ES :1999 ( V1.2.1 ) Identification card systems; Telecommunications IC cards and terminals; Additional Telecommunications Features (ATF) ES :1997 ( V1.1.1 ) Identification card systems; Telecommunications IC cards and terminals; Interoperability with synchronous prepaid cards Part 1: Requirements for off-line and on-line configurations ES :1998 ( V1.1.1 ) Multimedia Terminals and Applications (MTA); Application Programming Interface (API) for DAVIC Service Information (SI) ES :1997 ( V1.1.1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Terrestrial Flight Telecommunications System (TFTS); Circuit-mode voice-band data services; Group 3 fax support ES :2001 ( V1.3.1 ) Digital Video Broadcasting (DVB); DVB interaction channel for Cable TV distribution systems (CATV) ES :1998 ( V1.1.2 ) Public Switched Telephone Network (PSTN); Protocol over the local loop for display services; Server Display and Script Services (SDSS) ES :1998 ( V1.1.1 ) Cordless Terminal Mobility (CTM); Numbering and identification ES :1998 ( V1.1.1 ) Network Aspects (NA); Telecommunications Management Network (TMN); Resource management Part 1: Physical resource management ES :1998 ( V1.1.1 ) ES :2003 ( V1.13 ) Speech Processing, Transmission and Quality Aspects (STQ); Distributed speech recognition; Front-end feature extraction algorithm; Compression algorithms ES :1998 ( V1.1.1 ) Human Factors (HF); Universal Personal Telecommunications (UPT); Specification of the minimum Man-Machine Interface (MMI) for Phase 1 UPT ES :1999 ( V1.1.1 ) Transmission and Multiplexing (TM); Passive optical components; Fibre optic mechanical splices for single-mode optical fibre communications systems; Common requirements and conformance testing ES :1998 ( V1.1.1 ) Service provisioning in access networks ES :1998 ( V1.1.1 ) Human Factors (HF); User control procedures in basic call, point-to-point connections, for Integrated Services Digital Network (ISDN) videotelephony ES :1999 ( V1.1.1 ) Transmission and Multiplexing (TM); Passive optical components; Connector-type optical fixed attenuators for single-mode optical fibre communications systems; Common requirements and conformance testing ES :2003 ( V1.3.1 ) Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP); Signalling aspects of charging ES :1998 ( V1.1.1 ) Human Factors (HF); Telecommunications keypads and keyboards; Tactile identifiers ES :2003 ( V2.1.1 ) Human Factors (HF); Procedure for registering a supplementary service code ES :1999 ( V1.1.1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

43 Telecommunications Management Network (TMN); Universal Mobile Telecommunications System (UMTS); Management architecture framework; Overview, processes and principles ES :1999 ( V1.1.1 ) Telecommunications Management Network (TMN); Service Switching Function (SSF) management information model ES :2005 ( V1.3.1 ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications ES :2000 ( V1.1.1 ) Integrated Services Digital Network (ISDN); ISDN service enhancements based on DDI ranges for call diversion supplementary services ES :1999 ( V1.1.1 ) Telecommunications Management Network (TMN); Radio specific performance monitoring information model for Synchronous Digital Hierarchy (SDH) radio relay network element Open Service Access (OSA); Application Programming Interface (API) Part 2: Common Data Definitions (Parlay 3) ES :2005 ( V1.5.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 3: Framework (Parlay 3) ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 4: Call Control SCF (Parlay 3) ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 5: User Interaction SCF (Parlay 3) ES :2006 ( V1.5.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 6: Mobility SCF (Parlay 3) ES :2003 ( V1.4.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 7: Terminal Capabilities SCF (Parlay 3) ES :1999 ( V1.1.1 ) Telecommunications Management Network (TMN); TM-SDH IMnon intrusive monitoring function and supervisory unequipped termination function for the network element view ES :1999 ( V1.1.1 ) Telecommunications Management Network (TMN); X interface; SDH path provisioning and fault management ES :1999 ( V1.1.1 ) ES :1999 ( V1.1.1 ) ES :1999 ( V1.1.1 ) ES :2007 ( V3.1.1 ) Lawful Interception (LI); Handover interface for the lawful interception of telecommunications traffic ES :1999 ( V1.1.1 ) Integrated Services Digital Network (ISDN); File Transfer Profile; B-channel aggregation and synchronous compression ES :2000 ( V1.1.1 ) Public Switched Telephone Network (PSTN); 2-wire analogue voice band switched interfaces; Timed break recall (register recall); Specific requirements for terminals ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 1: Overview (Parlay 3) ES :2006 ( V1.6.1 ) ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 8: Data Session Control SCF (Parlay 3) ES :2003 ( V1.4.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 9: Generic Messaging SCF (Parlay 3) ES :2003 ( V1.4.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 10: Connectivity Manager SCF (Parlay 3) ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface (API) Part 11: Account Management SCF (Parlay 3) ES :2006 ( V1.6.1 ) Open Service Access (OSA); Application Programming Interface API) Part 12: Charging SCF (Parlay 3) ES :2001 ( V1.1.1 ) Terrestrial Trunked Radio (TETRA); TETRA Advanced Packet Service (TAPS) ES :2003 ( V12.1 ) Services and Protocols for Advanced Networks (SPAN); Short Message Service (SMS) for PSTN/ISDN; Service description ES :2007 ( V1.4.2 ) Speech Processing, Transmission and Quality Aspects (STQ); Harmonized Pan-European/North-American approach to loss and level planning for voice gateways to IP based networks ES :1999 ( V1.1.1 ) Telecommunications Management Network (TMN); Information model Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

44 for a VC transport system using a 34 Mbit/s PDH transmission system in accordance with ITU-T Recommendation G.832; ETR 004:1990 ( Ed. 1 ) Business Telecommunications (BT); Overall transmission plan aspects of a private branch network for voice connections with access to the public network ETR 005:1990 ( Ed. 1 ) Terminal Equipment (TE); Technical requirements for data terminal equipment for connection to high speed digital fixed-connection services ETR 006:1990 ( Ed. 1 ) Network Aspects (NA); Numbering and addressing for the Memorandum Of Understanding (MOU) on Integrated Services Digital Network (ISDN) (priorities 1 and 2) ETR 008:1990 ( Ed. 1 ) Network Aspects (NA); The method for the characterisation of the machine-machine interfaces utilised by a Telecommunication Management Network (TMN) ETR 019:1996 ( Ed. 2 ) Transmission and Multiplexing (TM); Specification of new generation high-capacity digital radio systems carrying 2 x STM-1 Synchronous Digital Hierarchy (SDH) signals in frequency bands with 40 MHz channel spacing ETR 020:1991 ( Ed. 1 ) Network Aspects (NA); Numbering and addressing for X.31 services ETR 021:1991 ( Ed. 1 ) Advanced Testing Methods (ATM); Tutorial on protocol conformance testing (Especially OSI standards and profiles) (ETR/ATM-1002) ETR 022:1993 ( Ed. 1 ) Advanced Testing Methods (ATM); Vocabulary of terms used in communications protocols conformance testing ETR 023:1991 ( Ed. 1 ) Intelligent Network (IN); Intelligent networks framework ETR 010:1993 ( Ed. 1 ) ISDN Standards Management (ISM); The ETSI Basic Guide on the European Integrated Services Digital Network (ISDN) ETR 011:1990 ( Ed. 1 ) Network Aspects (NA); The relationship between network component performance and the overall network performance ETR 012:1992 ( Ed. 1 ) Terminal Equipment (TE); Safety categories and protection levels at various interfaces for telecommunication equipment in customer premises ETR 015:1991 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Reference document ETR 016:1991 ( Ed. 1 ) Business Telecommunications (BT); Serveability performance objectives for Private Telecommunications Networks (PTN) ETR 017:1992 ( Ed. 1 ) Terminal Equipment (TE); Requirements for the attachment of Data Terminal Equipment comprising CCITT V. series type interfaces to data circuit-terminating equipment for low and medium data signalling rates ETR 018:1995 ( Ed. 4 ) Integrated Services Digital Network (ISDN); Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information elements by terminals supporting ISDN services ETR 024:1991 ( Ed. 1 ) Signalling Protocols and Switching (SPS); Intelligent Networks switching aspects ETR 025:1992 ( Ed. 1 ) Advanced Testing Methods (ATM); Evaluation criteria procedures for the standardisation of test specifications for European functional standards ETR 026:1992 ( Ed. 1 ) Network Aspects (NA); Terminal selection principles for priority I and II services of MoU - ISDN, applicable in multi-terminal environments at customer premises ETR 027:1991 ( Ed. 1 ) Radio Equipment and Systems (RES); Methods of measurement for private mobile radio equipment ETR 028:1994 ( Ed. 2 ) Radio Equipment and Systems (RES); Uncertainties in the measurement of mobile radio equipment characteristics ETR 029:1991 ( Ed. 1 ) Human Factors (HF); Access to telecommunications for people with special needs Recommendations for improving and adapting telecommunication terminals and services for people with impairments ETR 030:1992 ( Ed. 1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

45 Network Aspects (NA); Interworking aspects of MoU-ISDN Priority services of high radio link transmission quality, including the results of simulations ETR 031:1992 ( Ed. 1 ) Network Aspects (NA); Network aspects of ISDN to ISDN and ISDN internal interworking ETR 032:1991 ( Ed. 1 ) Network Aspects (NA); A standardizations programme for Universal Personal Telecommunications (UPT) ETR 033:1992 ( Ed. 1 ) Network Aspects (NA); Numbering plans for the interconnection of virtual private networks and public networks ETR 034:1991 ( Ed. 1 ) Business Telecommunications (BT); Approval requirements for complex customer premises apparatus and installations connected to the Public ISDN (including principles for the application of the essential requirements to any apparatus) ETR 035:1992 ( Ed. 1 ) Equipment Engineering (EE); Environmental engineering; Guidance and terminology ETR 037:1992 ( Ed. 1 ) Network Aspects (NA); Telecommunications Management Network (TMN); Objectives, principles, concepts and reference configurations ETR 038:1992 ( Ed. 1 ) Business Telecommunications (BT); Open Network Provision (ONP) technical requirements Standardisation requirements for ONP leased lines ETR 043:1992 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Services and facilities requirements specification ETR 044:1992 ( Ed. 1 ) Network Aspects (NA); Reference events for network performance parameters in an ISDN ETR 045:1992 ( Ed. 1 ) Network Aspects (NA); General Configuration and basic functions for the interconnection of Private Telecommunications Networks with the public ISDN ETR 046:1992 ( Ed. 1 ) Network Aspects (NA); Telecommunications management networks modelling guidelines ETR 047:1992 ( Ed. 1 ) Network Aspects (NA); Telecommunications Management Network (TMN); Management services ETR 048:1992 ( Ed. 1 ) Network Aspects (NA); Telecommunications Management Network (TMN); Management services prose descriptions ETR 049:1992 ( Ed. 1 ) Advanced Testing Methods (ATM); State of research in the area of formal test specification methods ETR 050:1993 ( Ed. 2 ) Paging Systems (PS); European Radio Message System (ERMES) ETR 039:1992 ( Ed. 1 ) Human Factors (HF); Human Factors standards for telecommunications applications ETR 051:1992 ( Ed. 1 ) Human Factors (HF); Usability checklist for telephones Basic requirements ETR 040:1992 ( Ed. 1 ) Advanced Testing Methods (ATM); Profile test specifications and conformance test reports ETR 052:1993 ( Ed. 1 ) Terminal Equipment (TE); Service intercommunication requirements for Teletex terminal equipment ETR 041:1992 ( Ed. 1 ) Transmission and Multiplexing (TM); Digital European Cordless Telecommunications (DECT); Transmission aspects 3,1 khz telephony Interworking with other networks ETR 042:1992 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); A guide to DECT features that influence the traffic capacity and the maintenance ETR 053:1996 ( Ed. 2 ) Radio Equipment and Systems (RES); Radio site engineering for radio equipment and systems in the mobile service ETR 053:1996 /C 1: ( Ed. 2 ) Radio Equipment and Systems (RES); Radio site engineering for radio equipment and systems in the mobile service Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

46 ETR 054:1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); The protocol reference model and its relationship with the OSI reference model ETR 055-1:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 1: Principles and objectives ETR 055-2:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 2: General service description on CCITT Recommendation X.28) ETR 059:1993 ( Ed. 1 ) Terminal Equipment (TE); Technical requirements for Packet Switched Public Data Network (PSPDN) indirect access (Based on CCITT Recommendation X.32) ETR 060:1995 ( Ed. 2 ) Signalling Protocols and Switching (SPS); Guidelines for using Abstract Syntax Notation One (ASN.1) in telecommunication application protocols ETR 055-3:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 3: Service aspects of charging, billing and accounting ETR 055-4:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 4: Service requirements on security mechanisms ETR 055-5:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 5: Types of UPT terminals and access devices ETR 055-6:1996 ( Ed. 3 ) Universal Personal Telecommunication (UPT); The service concept Part 6: UPT subscriptions, service profiles and information model ETR 055-7:1996 ( Ed. 2 ) Universal Personal Telecommunication (UPT); The service concept; Part 7: User procedures and user states ETR 062:1993 ( Ed. 1 ) Network Aspects (NA); Baseline document on the integration of Intelligent Network (IN) and Telecommunication Management Network (TMN) ETR 063:1993 ( Ed. 1 ) Business Telecommunications (BT); A survey of analogue accesses to the PSTN not covered by Final draft prets ETR 064:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Requirements on feature interaction and network functionalities ETR 065:1995 ( Ed. 2 ) Universal Personal Telecommunication (UPT); Requirements on charging, billing and accounting ETR 055-8:1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 8: Man-machine interface aspects ETR 055-9:1995 ( Ed. 2 ) Universal Personal Telecommunication (UPT); The service concept; Part 9: Service requirements on UPT numbering, addressing and identification ETR :1992 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 10: Supplementary services ETR :1993 ( Ed. 1 ) Universal Personal Telecommunication (UPT); The service concept Part 11: Service requirements on protection of third parties ETR 056:1993 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); System description document ETR 058:1993 ( Ed. 1 ) Terminal Equipment (TE); Technical requirements for Packet Switched Public Data Network (PSPDN) indirect access (Based ETR 067:1993 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Network considerations and requirements on dialling, routeing and numbering ETR 068:1993 ( Ed. 1 ) Human Factors (HF); European standardization situation of telecommunications facilities for people with special needs ETR 069:1993 ( Ed. 1 ) Radio Equipment and Systems (RES); HIgh PErformance Radio Local Area Network (HIPERLAN); Services and facilities ETR 070:1993 ( Ed. 1 ) Human Factors (HF); The Multiple Index Approach (MIA) for the evaluation of pictograms ETR 071:1993 ( Ed. 1 ) Methods for Testing and Specification (MTS); Semantic relationship between SDL and TTCN; A common semantics representation Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

47 ETR 072:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Connection types and their reference configurations ETR 073:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Evolution towards B-ISDN ETR 074:1993 ( Ed. 1 ) Terminal Equipment (TE); File transfer over the Integrated Services Digital Network (ISDN) ETR 075-1:1994 ( Ed. 1 ) Terminal Equipment (TE); Study and investigation into the feasibility of further harmonization of the requirements and associated tests of ETS (Candidate NET 4) Part 1: Overview and conclusions ETR 075-2:1994 ( Ed. 1 ) Terminal Equipment (TE); Study and investigation into the feasibility of further harmonization of the requirements and associated tests of ETS (Candidate NET 4) Part 2: Comprehensive study ETR 075-3:1995 ( Ed. 1 ) Terminal Equipment (TE); Study and investigation into the feasibility of further harmonization of the requirements and associated tests of ETS (Candidate NET 4) Part 3: Special studies ETR 076:1996 ( Ed. 4 ) Integrated Services Digital Network (ISDN); Standards guide ETR 077:1993 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); Spurious radiation limits to and from satellite earth stations, Very Small Aperture Terminals (VSATs) and Television Receive Only (TVRO) ETR 078:1993 ( Ed. 1 ) Maintenance: Telecommunications management network; TMN interface specification methodology [CCITT Recommendation M.3020 (1992)] Open Document Architecture (ODA); Identification of characteristics Integrated Services Digital Networks (ISDN) for Open Document Architecture (ODA) applications ETR 082:1993 ( Ed. 1 ) Network Aspects (NA); Connectionless Broadband Data Service (CBDS); Complementary information to ETS ETR 083:1993 ( Ed. 1 ) Universal Personal Telecommunication (UPT); General UPT security architecture ETR 084:1993 ( Ed. 1 ) Terminal Equipment (TE); Multimedia & Hypermedia Information Retrieval Services (M&HIRS); Investigation of candidate architectures for M&HIRS ETR 085:1993 ( Ed. 1 ) Transmission and Multiplexing (TM); Generic functional architecture of transport network ETR 086-1:1994 ( Ed. 1 ) Trans European Trunked Radio (TETRA) systems; Technical requirements specification Part 1: Voice plus Data (V+D) systems ETR 086-2:1994 ( Ed. 1 ) Trans European Trunked Radio (TETRA) systems; Technical requirements specification Part 2: Packet Data Optimised (PDO) systems ETR 086-3:1994 ( Ed. 1 ) Trans European Trunked Radio (TETRA) systems; Technical requirements specification Part 3: Security aspects ETR 087:1993 ( Ed. 1 ) Business Telecommunications (BT); Open Network Provision (ONP) technical requirements; Standardisation requirements for ONP leased lines Higher order leased lines ETR 088:1993 ( Ed. 1 ) Network Aspects (NA); Time/type of day dependant scheduling function support object classes ETR 079:1993 ( Ed. 1 ) Private Telecommunication Network (PTN); Supplementary services and additional network features ETR 080:1996 ( Ed. 2 ) Transmission and Multiplexing (TM); Integrated Services Digital Network (ISDN) basic rate access; Digital transmission system on metallic local lines ETR 089:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Principles and requirements for signalling and management information transfer ETR 090:1996 ( Ed. 2 ) ETSI object identifier tree; Common domain; Intelligent Network (IN) domain ETR 081:1993 ( Ed. 1 ) ETR 091:1993 ( Ed. 1 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

48 ETSI object identifier tree; Common domain; Mobile domain ETR 092:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Framework for conformance testing of lower layers in B-ISDN ETR 103:1995 ( Ed. 2 ) European digital cellular telecommunications system (Phase 2); Radio network planning aspects (GSM 03.30) ETR 093:1993 ( Ed. 1 ) Satellite Personal Communications Networks (S-PCN); Possible European standardization of certain aspects of S-PCN; Phase I report ETR 094:1993 ( Ed. 1 ) Methods for Testing and Specification (MTS); Guide for the implementation of ISO/IEC 9646 Conformance Assessment Process (CAP) ETR 094:1993 /C 1:1994 ( Ed. 1 ) Methods for Testing and Specification (MTS); Guide for the implementation of ISO/IEC 9646 Conformance Assessment Process (CAP) ETR 095:1993 ( Ed. 1 ) Human Factors (HF); Guide for usability evaluations of telecommunications systems and services ETR 096:1993 ( Ed. 1 ) Human Factors (HF); Phone Based Interfaces (PBI); Human factors guidelines for the design of minimum phone based user interface to computer services ETR 097:1994 ( Ed. 1 ) Terminal Equipment (TE); Security architecture for the directory ETR 098:1993 ( Ed. 1 ) Terminal Equipment (TE); Review of studies and investigations concerning essential requirements in ETS (NET 4) ETR 099:1993 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); General description of a GSM Public Land Mobile Network (PLMN) (GSM 01.02) ETR 100:1995 ( Ed. 3 ) European digital cellular telecommunications system (Phase 2); Abbreviations and acronyms (GSM 01.04) ETR 102:1996 ( Ed. 2 ) Digital cellular telecommunications system (Phase 2) (GSM); Technical performance objectives (GSM 03.05) ETR 104:1993 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); Support of Videotex (GSM 03.43) ETR 105:1993 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); Support of teletex in a GSM Public Land Mobile Network (PLMN) (GSM 03.44) ETR 106:1996 ( Ed. 3 ) Digital cellular telecommunications system (Phase 2) (GSM); Example protocol stacks for interconnecting Service Centre(s) (SC) and Mobile-services Switching Centre(s) (MSC) (GSM 03.47) ETR 107:1995 ( Ed. 3 ) European digital cellular telecommunications system (Phase 2); Example protocol stacks for interconnecting Cell Broadcast Centre (CBC) and Base Station Controller (BSC) (GSM 03.49) ETR 108:1994 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); GSM Electro Magnetic Compatibility (EMC) considerations (GSM 05.90) ETR 108:1994 /A 1:1995 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); GSM Electro Magnetic Compatibility (EMC) considerations (GSM 05.90) ETR 111:1997 ( Ed. 7 ) Digital cellular telecommunications system (Phase 2) (GSM); Interworking between Phase 1 infrastructure and Phase 2 Mobile Stations (MS) (GSM version 4.9.0) ETR 112:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); B-ISDN principles ETR 113:1993 ( Ed. 1 ) Human Factors (HF); Results of an evaluation study of pictograms for point-to-point videotelephony ETR 114:1993 ( Ed. 1 ) Transmission and Multiplexing (TM); Functional architecture of Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

49 Synchronous Digital Hierarchy (SDH) transport networks ETR 116:1994 ( Ed. 1 ) Human Factors (HF); Human factors guidelines for ISDN Terminal equipment design ETR 128:1995 ( Ed. 2 ) European digital cellular telecommunications system (Phase 2); ETSI object identifier tree; Common domain; Mobile domain; Operation and Maintenance (O&M), managed object registration definition (GSM 12.30) ETR 117:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Asynchronous Transfer Mode (ATM); Signalling ATM Adaptation Layer (AAL) requirements ETR 118:1993 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Switching, exchange and cross-connect functions and performance requirements ETR 119:1993 ( Ed. 1 ) Network Aspects (NA); Open Network Provision (ONP) study on possible new interfaces at the network side of the NT1 ETR 120:1994 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Open channel ETR 121:1994 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Architecture and functionalities for interworking ETR 122:1994 ( Ed. 1 ) Network Aspects (NA); Connectionless Broadband Data Service (CBDS) CBDS over Asynchronous Transfer Mode (ATM) ETR 123:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Parameters and mechanisms provided by the network relevant for charging in B-ISDN ETR 124:1994 ( Ed. 1 ) Error handling for the Directory ETR 130:1994 ( Ed. 1 ) Methods for Testing and Specification (MTS); Interoperability and conformance testing A classification scheme ETR 131:1994 ( Ed. 1 ) Terminal Equipment (TE); An investigation into the need for standardization in the area of stored voice services ETR 132:1994 ( Ed. 1 ) Radio broadcasting systems; Code of practice for site engineering Very High Frequency (VHF), frequency modulated, sound broadcasting transmitters ETR 135:1994 ( Ed. 1 ) Transmission and Multiplexing (TM); Network aspects and applications for a 4 (and n x 4) kbit/s data link in a kbit/s frame ETR 137:1995 ( Ed. 1 ) Intelligent Network (IN); Service and service feature ETR 139:1994 ( Ed. 1 ) Radio Equipment and Systems (RES); Radio in the Local Loop (RLL) ETR 140:1994 ( Ed. 1 ) Television systems; Allocation of Service Identification (SI) codes for Multiplexed Analogue Component (MAC)/Packet services ETR 141:1994 ( Ed. 1 ) Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; The Tree and Tabular Combined Notation (TTCN) style guide ETR 125:1994 ( Ed. 1 ) Introduction to OSI Directory functional standards ETR 126:1994 ( Ed. 1 ) Transmission and Multiplexing (TM); Applications of optical fibre amplifiers in long distance and optical fibre networks ETR 127:1994 ( Ed. 1 ) Equipment Engineering (EE); Electrostatic environment and mitigation measures for Public Telecommunications Network (PTN) ETR 142:1994 ( Ed. 1 ) Methods for Testing and Specification (MTS); Guidance on the production and completion of System Conformance Statement (SCS) proforma ETR 144:1994 ( Ed. 1 ) Universal Personal Telecommunication (UPT); UPT phase 1: Numbering, dialling and evolution for incall ETR 149:1994 ( Ed. 1 ) Network Aspects (NA); Interworking between Metropolitan Area Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

50 Networks (MANs) and Asynchronous Transfer Mode (ATM) networks for the Connectionless Broadband Data Service (CBDS) ETR 160:1995 ( Ed. 1 ) Human Factors (HF); Human Factors aspects of multimedia telecommunications ETR 151:1995 ( Ed. 1 ) Equipment Engineering (EE); ElectroMagnetic Compatibility (EMC) testing of telecommunication equipment above 1 GHz ETR 152:1996 ( Ed. 3 ) Transmission and Multiplexing (TM); High bit-rate Digital Subscriber Line (HDSL) transmission system on metallic local lines; HDSL core specification and applications for kbit/s based access digital sections ETR 161:1995 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Functional description of Virtual Path (VP) cross-connect ETR 162:1995 ( Ed. 1 ) Digital Video Broadcasting (DVB); Allocation of Service Information (SI) codes for DVB systems ETR 153:1994 ( Ed. 1 ) Methods for Testing and Specification (MTS); Guidance on the production and completion of System Conformance Test Report (SCTR) and Protocol Conformance Test Report (PCTR) proforma ETR 154:1996 ( Ed. 2 ) Digital Video Broadcasting (DVB); Implementation guidelines for the use of MPEG-2 Systems, Video and Audio in satellite, cable and terrestrial broadcasting applications ETR 154:1997 ( Ed. 3 ) Digital Video Broadcasting (DVB); Implementation guidelines for the use of MPEG-2 Systems, Video and Audio in satellite, cable and terrestrial broadcasting applications ETR 163:1995 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); The interconnection of Very Small Aperture Terminal (VSAT) systems to Integrated Service Digital Networks (ISDNs) ETR 164:1995 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Intelligent Network (IN); Interaction between IN Application Protocol (INAP) and ISDN User Part (ISUP) version 2 ETR 165:1995 ( Ed. 1 ) Human Factors (HF); Recommendation for a tactile identifier on machine readable cards for telecommunication terminals ETR 166:1995 ( Ed. 1 ) Human Factors (HF); Evaluation of telephones for people with special needs; An evaluation method ETR 155:1995 ( Ed. 1 ) Asynchronous Transfer Mode (ATM); Operation Administration and Maintenance (OAM) functions and parameters for assessing performance parameters ETR 156:1995 ( Ed. 1 ) Asynchronous Transfer Mode (ATM); Multiprotocol interconnect over ATM based subnetworks ETR 157-1:1996 ( Ed. 1 ) Asynchronous Transfer Mode (ATM); Multiprotocol interconnect over ATM based subnetworks ETR 158:1995 ( Ed. 1 ) Network Aspects (NA); European numbering initiatives; Background and strategic directions ETR 167:1995 ( Ed. 1 ) Human Factors (HF); User instructions for public telecommunications services; Design guidelines ETR 168:1995 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Guidelines for the interpretation of ETS (ITU-T Recommendation Q.2931) ETR 169:1995 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); Common Technical Regulations (CTRs) in the satellite earth station equipment field ETR 170:1995 ( Ed. 1 ) Human Factors (HF); Generic user control procedures for telecommunication terminals and services ETR 159:1995 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); Wide area mobility using GSM ETR 171:1995 ( Ed. 1 ) Methods for Testing and Specification (MTS); Proforma for scoping reports Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

51 ETR 172:1995 ( Ed. 2 ) Business TeleCommunications (BTC); Virtual Private Networking (VPN); Services and networking aspects; Standardization requirements and work items ETR 173:1995 ( Ed. 1 ) Terminal Equipment (TE); Functional model for multimedia applications validation techniques for European Telecommunication Standards (ETSs) containing SDL ETR 185:1995 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Profile overview ETR 174:1995 ( Ed. 1 ) European digital cellular telecommunications system (Phase 2); Interworking aspects of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface between Phase 1 and Phase 2 (GSM 09.91) ETR 175:1995 ( Ed. 1 ) Human Factors (HF); User procedures for multipoint videotelephony ETR 176:1995 ( Ed. 1 ) Terminal Equipment (TE); Interworking and interoperability of retrieval services and audiovisual services on narrow band networks ETR 177:1996 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); Possible European standardization of certain aspects of Satellite Personal Communications Networks (S-PCN); Phase 2: Objectives and options for standardization ETR 179:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); UPT management aspects ETR 180:1995 ( Ed. 1 ) Asynchronous Transfer Mode (ATM); Optionality aspects of ATM Adaptation Layer (AAL) type 1 ETR 181:1995 ( Ed. 1 ) Terminal Equipment (TE); Multimedia portfolio; A compilation of multimedia applications and services provided by ETSI members ETR 182:1995 ( Ed. 1 ) Terminal Equipment (TE); Interconnection of directory Management domains ETR 183:1995 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Conformance testing on DECT equipment ETR 184:1995 ( Ed. 1 ) Methods for Testing and Specification (MTS); Overview of ETR 188:1995 ( Ed. 1 ) Private Telecommunication Network (PTN); Cordless Terminal Mobility (CTM); Impact of CTM on fixed PTN ETR 189:1995 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Master list of codepoints and operation values ETR 190:1995 ( Ed. 1 ) Methods for Testing and Specification (MTS); Partial and multi-part Abstract Test Suites (ATS); Rules for the context-dependent re-use of ATSs ETR 191:1995 ( Ed. 1 ) Private Telecommunication Network (PTN); PTN mobility; Use of Universal Personal Telecommunication (UPT) Phase 1; General principles and service aspects ETR 192:1995 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); Modulation and channel coding of 34,368 Mbit/s and 44,736 Mbit/s digital television contribution links via satellite ETR 194:1996 ( Ed. 1 ) Equipment Engineering (EE); Connector for ITU-T defined G.series digital hierarchy interfaces ETR 196:1995 ( Ed. 1 ) Network Aspects (NA); Call forwarding facilities on the fixed public telephone network ETR 197:1995 ( Ed. 1 ) Network Aspects (NA); Baseline document on multimedia services ETR 198:1995 ( Ed. 1 ) Human Factors (HF); User trials of user control procedures for Integrated Services Digital Network (ISDN) videotelephony ETR 199:1995 ( Ed. 1 ) Network Aspects (NA); Enhancement to the modelling and capabilities of the Specialised Resource Function (SRF) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

52 ETR 200:1996 ( Ed. 3 ) Digital cellular telecommunications system (Phase 2) (GSM); Recommended infrastructure measures to overcome specific Phase 1 Mobile Station (MS) faults (GSM 09.94) ETR 212:1995 ( Ed. 2 ) Methods for Testing and Specification (MTS); Implementation Conformance Statement (ICS) proforma style guide ETR 202:1995 ( Ed. 1 ) PPublic Switched Telephone Network (PSTN); Real time clock [CEPT Recommendation T/CS E (1981)] ETR 213:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Service requirements on UPT numbering, addressing and identification ETR 203:1995 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Messages and formats for push-button dialling [CEPT Recommendation T/CS E (1980)] ETR 204:1995 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Automatic sender for push-button multifrequency signalling [CEPT Recommendation T/CS E (1985)] ETR 205:1995 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Multifrequency push-button receiver at subscriber s premises [CEPT Recommendation T/CS E (1983)] ETR 206:1995 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Multifrequency signalling system to be used for push-button telephones [CEPT Recommendation T/CS E (1985)] ETR 207:1995 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Alternative sender for multifrequency signalling system to be used for push-button telephones [CEPT Recommendation T/STI E (1986)] ETR 216:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Subscriptions, service profiles and information model ETR 217:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); User procedures and user states ETR 218:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Man-machine interface ETR 219:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Functional requirements for Dual Tone Multi-Frequency (DTMF) type UPT access devices ETR 220:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Service requirements on security features ETR 221:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Supplementary services ETR 208:1995 ( Ed. 1 ) Human Factors (HF); HF aspects of Universal Personal Telecommunications (UPT); User requirements ETR 209:1996 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Freephone (FPH) supplementary service; Functional capabilities and information flows ETR 210:1995 ( Ed. 1 ) ASN.1 library index; Version ETR 211:1997 ( Ed. 2 ) Digital Video Broadcasting (DVB); Guidelines on implementation and usage of Service Information (SI) ETR 222:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Architecture and functionalities for interworking ETR 223:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Phase 1 (restricted UPT service scenario); Network functionalities for charging, billing and accounting ETR 224:1995 ( Ed. 1 ) Intelligent Network (IN); IN Capability Set 2 (CS2); IN intra-domain management requirements for CS2 ETR 226:1995 ( Ed. 1 ) Radio Equipment and Systems (RES); HIgh PErformance Radio Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

53 Local Area Network (HIPERLAN); Architecture for Time Bound Services (TBS) Transmission and Multiplexing (TM); List of documents relevant to SDH transmission equipment ETR 227:1995 ( Ed. 1 ) Multimedia applications and services; Inband and outband signalling protocols; A survey ETR 240:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Optical Access Networks (OANs); Operations and Maintenance (OAM) of OANs ETR 228:1995 ( Ed. 1 ) Terminal Equipment (TE); Broadband Multimedia Information Retrieval Services ETR 229:1995 ( Ed. 1 ) European digital cellular telecommunications system; Half rate speech; Performance characterization of the half rate speech codec (GSM 06.08) ETR 241:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Functional architecture of 2 Mbit/s based Plesiochronous Digital Hierarchy (PDH) transport networks ETR 242:1995 ( Ed. 1 ) Signalling Protocols and Switching (SPS); Open Network Provision (ONP) standardization for access to the local loop ETR 230:1995 ( Ed. 1 ) Network Aspects (NA); Telecommunications Management Network (TMN); TMN standardisation overview ETR 244:1995 ( Ed. 1 ) Intelligent Network (IN); ETSI workplan for IN; (Mandate BC-T-305, step 1) ETR 231:1995 ( Ed. 1 ) Universal Personal Telecommunication (UPT); UPT routeing ETR 232:1995 ( Ed. 1 ) Security Techniques Advisory Group (STAG); Glossary of security terminology ETR 233:1997 ( Ed. 1 ) Telecommunications security; A directory of security features in ETSI standards ETR 234:1995 ( Ed. 1 ) Security Techniques Advisory Group (STAG); A guide to specifying requirements for cryptographic algorithms ETR 235:1995 ( Ed. 1 ) Security Techniques Advisory Group (STAG); Requirements specification for an encryption algorithm for operators of European public telecommunications networks ETR 237:1996 ( Ed. 1 ) Security Techniques Advisory Group (STAG); Baseline security standards; Features and mechanisms ETR 238:1995 ( Ed. 1 ) ETSI/CENELEC standardization programme for the development of Harmonized Standards related to Electro-Magnetic Compatibility (EMC) in the field of telecommunications ETR 239:1996 ( Ed. 1 ) ETR 246:1995 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Application of DECT Wireless Relay Stations (WRS) ETR 247:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Technical report on statistical approach design ETR 248:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Use of single-mode fibre in the access network ETR 250:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Speech communication quality from mouth to ear for 3,1 khz handset telephony across networks ETR 251:1996 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Signalling System R2; Digital line signalling [CEPT Recommendation T/CS E (1985)] ETR 252:1996 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Signalling System R2; Conversion between analogue and digital versions of line signalling [CEPT Recommendation T/CS E (1984)] ETR 253:1996 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Signalling System R2; Signalling tests via the European Communications Satellite (ECS) [CEPT Recommendation T/CS E (1985)] Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

54 ETR 254:1996 ( Ed. 1 ) Public Switched Telephone Network (PSTN); Signalling System R2; Signalling and circuit supervision via the European Communications Satellite (ECS) [CEPT Recommendation T/CS E (1985)] ETR 261-5:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 5: Experimental evaluation of the CEPT and GSM code schemes ETR 256:1996 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Signalling System No.7; Telephone User Part "Plus" (TUP+) [CEPT Recommendation T/S E (1988)] ETR 257:1996 ( Ed. 1 ) V interfaces at the digital Service Node (SN); Identification of the applicability of existing protocol specifications for a VB5 reference point in an access arrangement with Access Networks (ANs) ETR 258:1996 ( Ed. 1 ) Intelligent Network (IN); Intelligent Network Capability Set 2 (CS2); Scoping of Intelligent Network Application Protocol (INAP) ETR 259:1996 ( Ed. 1 ) Methods for Testing and Specification (MTS); Bibliography of techniques, methodologies and practices used in Standards making ETR 260:1997 ( Ed. 1 ) Network Aspects (NA); Connectionless Broadband Data Service (CBDS); Addressing principles and related aspects for the CBDS ETR 261-1:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 1: General approach and summary of findings ETR 261-2:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 2: Literature review - Memory and related issues for dialling supplementary services using number codes ETR 261-3:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 3: Experimental comparison of two MMIs - Simulated UPT access and prototype ISDN supplementary services ETR 261-4:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 4: Experimental comparison of the effect of categorized and non-categorized formats within user instructions ETR 261-6:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 6: Survey of existing PSTN, ISDN and mobile networks, and a user survey of supplementary service use within Centrex and PBX environments ETR 261-7:1996 ( Ed. 1 ) Human Factors (HF); Assessment and definition of a harmonized minimum man-machine interface (MMI) for accessing and controlling public network based supplementary services Part 7: Experimental evaluation of draft ETS ETR 262:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Asynchronous Transfer Mode (ATM); Video On Demand (VOD) network aspects ETR 263:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Specific interworking functionalities with B-ISDN ETR 264:1996 ( Ed. 1 ) Connectionless Broadband Data Service (CBDS); Asynchronous Transfer Mode (ATM); CBDS over ATM - complementary information to ETS ETR 265:1996 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Technical requirements specification for Direct Mode (DM) ETR 267:1996 ( Ed. 1 ) Methods for Testing and Specification (MTS); Conformance testing specifications; Quality review tables ETR 268:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Physical aspects of long-haul optical systems for 10 Gbit/s capacity ETR 269:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Network level information modelling ETR 270:1996 ( Ed. 1 ) Satellite Earth Stations and Systems (SES); Survey on the need for an ETS for Aircraft Earth Stations (AES) in the Aeronautical Mobile Satellite Service (AMSS) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

55 ETR 271:1996 ( Ed. 1 ) Special Mobile Group (SMG); Universal Mobile Telecommunications System (UMTS); Objectives and overview (UMTS 01.01) ETR 272:1996 ( Ed. 1 ) Terminal Equipment (TE); Audio-visual retrieval services on narrow-band networks; Priority setting and description transmission delay and transmission delay values for components on connections supporting speech communication over evolving digital networks ETR 276:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Open Network Provision (ONP) leased lines; Standardization requirements for Synchronous Digital Hierarchy (SDH) leased lines ETR :1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 1: Uncertainties in the measuremement of mobile radio equipment characteristics Sub-part 1: Introduction ETR :1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 1: Uncertainties in the measuremement of mobile radio equipment characteristics Sub-part 2: Examples and annexes ETR 273-2:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 2: Anechoic chamber ETR 273-3:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 3: Anechoic chamber with a ground plane ETR 273-4:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 4: Open area test site ETR 273-5:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 5: Striplines ETR 273-6:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 6: Test fixtures ETR 273-7:1998 ( Ed. 1 ) ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties Part 7: Artificial human beings ETR 275:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Considerations on ETR 277:1996 ( Ed. 1 ) Security Algorithms Group of Experts (SAGE); Requirements specification for an encryption algorithm for use in audio visual systems ETR 279:1997 ( Ed. 1 ) Satellite Personal Communications Networks (S-PCN); Need and objectives for standards in addition to the ETSs on essential requirements ETR 281:1996 ( Ed. 1 ) Business TeleCommunications (BTC); Background information on the production of the standards defining the Open Network Provision (ONP) minimum set of leased lines ETR 282:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Signalling requirements for Video On Demand (VOD) and multimedia interactive services ETR 283:1996 ( Ed. 1 ) Equipment Engineering (EE); Transient voltages at Interface A on telecommunications direct current (dc) power distributions ETR 283:1996 /C 1:1997 ( Ed. 1 ) Equipment Engineering (EE); Transient voltages at Interface A on telecommunications direct current (dc) power distributions ETR 284:1996 ( Ed. 1 ) Digital cellular telecommunications system (Phase 2) (GSM); Radio link management in hierarchical networks (GSM 05.22) ETR 285:1996 ( Ed. 1 ) Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Functional capabilities and information flows ETR 286:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Applicability of Narrowband Integrated Services Digital Network (N-ISDN) supplementary services to B-ISDN services Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

56 ETR 287:1996 ( Ed. 1 ) Television systems; Code of practice for enhanced Teletext ETR 298:1996 ( Ed. 1 ) Methods for Testing and Specification (MTS); Specification of protocols and services; Handbook for SDL, ASN.1 and MSC development ETR 288:1996 ( Ed. 1 ) Television systems; Code of practice for an Electronic Programme Guide (EPG) ETR 289:1996 ( Ed. 1 ) Digital Video Broadcasting (DVB); Support for use of scrambling and Conditional Access (CA) within digital broadcasting systems ETR 290:1997 ( Ed. 1 ) Digital Video Broadcasting (DVB); Measurement guidelines for DVB systems ETR 291:1996 ( Ed. 1 ) Special Mobile Group (SMG); Universal Mobile Telecommunications System (UMTS); System Requirements (UMTS 01.03) ETR 292:1997 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Technical requirements specification; Network management ETR 293-1:1997 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Air Interface (AI) layer 2 and 3 protocol validation Part 1: Validation of SDL models for Voice plus Data (V+D) ETR 293-2:1998 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Air Interface (AI) layer 2 and 3 protocol validation; Part 2: Validation of SDL models for Packet Data Optimized (PDO) ETR 294:1996 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice and Data (V+D) and Direct Mode Operation (DMO); Mobile Station (MS) Man Machine Interface (MMI ETR 295:1996 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); User requirements for Subscriber Identity Module (SIM) ETR 296:1996 ( Ed. 1 ) Terminal Equipment (TE); Multimedia; Standardization areas to be covered by the Multimedia project ETR 297:1996 ( Ed. 1 ) Human Factors (HF); Human Factors in Videotelephony ETR 299-1:1996 ( Ed. 1 ) ntegrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Network Integration Testing (NIT); ISDN end-to-end testing Part 1: Test Suite Structure and Test Purposes (TSS&TP) specification ETR 299-2:1997 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Network Integration Testing (NIT); ISDN end-to-end testing Part 2: Implementation Conformance Statement (ICS) proforma, Abstract Test Suite (ATS) and partial Implementation extra Information for Testing (IXIT) proforma specification ETR 300-3:2000 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Designers' guide Part 3: Direct Mode Operation (DMO) ETR 300-4:1997 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Designers' guide Part 4: Network management ETR 300-5:1998 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Designers' guide Part 5: Guidance on Numbering and addressing ETR 302:1996 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Supplementary services for multimedia services ETR 303:1997 ( Ed. 1 ) Methods for Testing and Specification (MTS); Test Synchronization; Architectural reference; Test Synchronization Protocol 1 (TSP1) specification ETR 306:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Access networks for residential customers ETR 310:1996 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Traffic capacity and spectrum requirements for multi-system and multi-service DECT applications co-existing in a common frequency band ETR 310:1996 /C 1:1996 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Traffic capacity and spectrum requirements for multi-system and multi-service DECT applications co-existing in a common frequency band Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

57 ETR 313:1996 ( Ed. 1 ) Terminal Equipment (TE); End-to-end protocols for multimedia information retrieval services; Interworking between Digital Audio Visual Council (DAVIC) compliant broadband systems and Videotex systems ETR 328:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Asymmetric Digital Subscriber Line (ADSL); Requirements and performance ETR 314:1996 ( Ed. 1 ) Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards ETR 314:1997 ( Ed. 2 ) Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards ETR 315:1996 ( Ed. 1 ) Universal Personal Telecommunication (UPT); UPT access parameters and identities for the UPT users ETR 316:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Numbering and addressing in B-ISDN ETR 318:1996 ( Ed. 1 ) Intelligent Network (IN); IN Capability Set 1 (CS1); Distributed functional plane ETR 320:1996 ( Ed. 1 ) Intelligent Network (IN); Security requirements for global IN systems ETR 321:1996 ( Ed. 1 ) Intelligent Network (IN); Global functional plane for IN Capability Set 1 (CS1) ETR 322:1996 ( Ed. 1 ) Intelligent Network (IN); Vocabulary of terms and abbreviations for CS-1 and CS-2 ETR 324:1996 ( Ed. 1 ) Universal Personal Telecommunication (UPT); Authentication algorithm for Phase 1; Requirements specification ETR 325:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); General principles and functional requirements for interworking B-ISDN and Narrowband-ISDN (N-ISDN) ETR 326:1996 ( Ed. 1 ) Transmission and Multiplexing (TM); Broadband Integrated Services Digital Network (B-ISDN) access ETR 330:1996 ( Ed. 1 ) Security Techniques Advisory Group (STAG); A guide to legislative and regulatory environment ETR 331:1996 ( Ed. 1 ) Security Techniques Advisory Group (STAG); Definition of user requirements for lawful interception of telecommunications; Requirements of the law enforcement agencies ETR 332:1996 ( Ed. 1 ) Security Techniques Advisory Group (STAG); Security requirements capture ETR 333:1998 ( Ed. 2 ) Human Factors (HF); Text Telephony; Basic user requirements and recommendations ETR 334:1996 ( Ed. 1 ) Human Factors (HF); The implications of human ageing for the design of telephone terminals ETR 335:1997 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); European Backbone Telecommunications Network (EBTN) ETR 336:1997 ( Ed. 1 ) Telecommunications Management Network (TMN); Introduction to standardizing security for TMN ETR 338:1996 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Vocabulary for B-ISDN ETR 339:1997 ( Ed. 1 ) Intelligent Network (IN); IN interconnect business requirements ETR 340:1996 ( Ed. 1 ) Telecommunications security; Guidelines for security management techniques ETR 341:1996 ( Ed. 1 ) Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); Profile overview Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

58 ETR 343:1997 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Extended lower layer protocols; Definition of B and D Channel protocols with proposed Requirements List (RL) and profile specific Implementation Conformance Statement (ICS) Statement (ICS) and Implementation extra Information for Testing (IXIT) proforma specification for interface IA and IB ETS :1994 ( Ed. 1 ) TTerminal Equipment (TE); Basic and recommended additional requirements for terminal equipment supporting Teletex application ETR 344:1997 ( Ed. 1 ) Terminal Equipment (TE); The technical feasibility of a harmonized plug and socket standard for European Public Switched Telephone Network (PSTN) access ETS :1994 ( Ed. 1 ) Terminal Equipment (TE); Test procedures for Teletex ETR 345:1997 ( Ed. 1 ) Human Factors (HF); Characteristics of telephone keypads and keyboards; Requirements of elderly and disabled people ETR 346:1996 ( Ed. 1 ) Terrestrial Trunked Radio (TETRA); Air Interface (AI) layer 2 and 3 protocol validation Part 1: Validation of test suites for Voice plus Data (V+D) ETR 354:1996 ( Ed. 1 ) Digital cellular telecommunications system; Example protocol stacks for interconnecting Service Centre(s) (SC) and Mobile-services Switching Centre(s) (MSC) (GSM version 5.0.0) ETR 359:1996 ( Ed. 1 ) Digital cellular telecommunications system; General network interworking scenarios (GSM version 5.0.0) ETR 360:1997 ( Ed. 1 ) Broadband Integrated Services Digital Network (B-ISDN); Support of multipoint communications in Asynchronous Transfer Mode (ATM) networks ETR 365:1996 ( Ed. 1 ) Digital cellular telecommunications system; Interface protocols for the connection of Short Message Service Centres (SMSCs) to Short Message Entities (SMEs) (GSM version 5.0.0) ETS :1996 ( Ed. 2 ) Public Switched Telephone Network (PSTN); Category II specification for or bits per second duplex modems standardized for use on the PSTN ETS :1991 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Support of packet-mode terminal equipment by an ISDN ETS :1998 ( Ed. 2 ) Integrated Services Digital Network (ISDN); Primary rate User-Network Interface (UNI) Part 3: Implementation Conformance ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Primary rate access - safety and protection Part 1 : General ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Primary rate access - safety and protection Part 2 : Interface Ia - safety ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Primary rate access - safety and protection Part 3 : Interface Ia - protection ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Primary rate access - safety and protection Part 4 : Interface Ib - safety ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Primary rate access - safety and protection Part 5 : Interface Ib - protection ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Basic access - safety and protection Part 1: General ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Basic access - safety and protection Part 2: Interface Ia - safety ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Basic access - safety and protection Part 3: Interface Ia - protection ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Basic access - safety and protection Part 4: Interface Ib - safety ETS :1992 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Basic access - safety and protection Part 5: Interface Ib - protection Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

59 ETS :1997 ( Ed. 2 ) Integrated Services Digital Network (ISDN); ISDN Packet Mode Bearer Services (PMBS); ISDN Virtual Call (VC) and Permanent Virtual Circuit (PVC) bearer services provided by the B-channel of the user access - basic and primary rate ETS :1997 ( Ed. 2 ) Integrated Services Digital Network (ISDN); ISDN Packet Mode Bearer Service (PMBS); ISDN Virtual Call (VC) and Permanent Virtual Circuit (PVC) bearer services provided by the D-channel of the user access - basic and primary rate ETS :1991 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Service Description ETS :1991 ( Ed. 1 ) Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Functional capabilities and information flows Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

60 3. Normas Internacionais publicadas Normas Internacionais aprovadas e publicadas pela Comissão Eletrotécnica Internacional (IEC) e pela Organização Internacional de Normalização (ISO) Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título. IEC TC 3C IEC 62648:2012 ( Ed 1.0 ) Graphical symbols for use on equipment - Guidelines for the inclusion of graphical symbols in IEC publications TC 17B IEC :2007 ( Ed 5.0 ) CONSOLIDADA Low-voltage switchgear and controlgear Part 1: General rules TC 22E IEC :2011 ( Ed 2.0 ) Low-voltage power supplies, d.c. output Part 3: Electromagnetic cpmpatibility (EMC) TC 23H IEC :1999 ( Ed 4.0 ) CONSOLIDADA Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements TC 23H IEC :1999 /A 2:2012 ( Ed 4.0 ) Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements TC 23B IEC :2011 ( Ed 2.0 ) Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment TC 23H IEC :2011 ( Ed 1.0 ) Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) Part 1: General requirements TC 23E IEC 62640:2011 ( Ed 1.0 ) Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses TC 34B IEC 60238:2004 ( Ed 8.0 ) CONSOLIDADA Edison screw lampholders TC 34D IEC/TR 62696:2011 ( Ed 1.0 ) Luminaires - Application of the IK code IEC TC 34A IEC/TR 62778:2012 ( Ed 1.0 ) Application of IEC for the assessment of blue light hazard to light sources and luminaires TC 34A IEC/TS 62504:2011 ( Ed 1.0 ) General lighting - LEDs and LED modules - Terms and definitions TC 46C IEC/TR :2011 ( Ed 1.0 ) Multicore and symmetrical pair/quad cables for digital communications Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables TC 47E IEC :2004 ( Ed 1.0 ) CONSOLIDADA Semiconductor devices Part 16-4: Microwave integrated circuits - Switches TC 59D IEC 60734:2012 ( Ed 4.0 ) Household electrical appliances - Performance - Hard water for testing TC 61C IEC :2010 ( Ed 7.0 ) CONSOLIDADA Household and similar electrical appliances - Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers TC 61C IEC :2010 /A 1:2012 ( Ed 7.0 ) Household and similar electrical appliances - Safety Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers TC 61C IEC :2012 ( Ed 5.0 ) Household and similar electrical appliances - Safety Part 2-34: Particular requirements for motor-compressors TC 34B IEC :2004 ( Ed 4.0 ) CONSOLIDADA Miscellaneous lampholders Part 1: General requirements and tests TC 34A IEC 62717:2011 ( Ed 1.0 ) LED modules for general lighting - Performance requirements TC 34A IEC/PAS :2011 ( Ed 1.0 ) LED - Binning Part 1: General requirements and white grid TC 34D IEC/PAS :2011 ( Ed 1.0 ) Luminaire performance Part 1: General requirements TC 61J IEC :2012 ( Ed 4.0 ) Household and similar electrical appliances - Safety Part 2-67: Particular requirements for floor treatment and floor treatment machines for commercial use TC 61J IEC :2012 ( Ed 4.0 ) Household and similar electrical appliances - Safety Part 2-68: Particular requirements for spray extraction machines for commercial use TC 62D IEC :2012 ( Ed 2.0 ) Medical electrical equipment Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

61 stimulators TC 62D IEC :2011 ( Ed 3.0 ) Medical electrical equipment Part 2-27: Particular requirements for basic safety and essential performance of electrocardiographic monitoring equipment TC 62D IEC/TR 62653:2012 ( Ed 1.0 ) Guideline for safe operation of medical equipment used for haemodialysis treatments TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-2: Application layer service definition - Type 2 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-3: Application layer service definition - Type 3 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-10: Application layer service definition - Type 10 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-12: Application layer service definition - Type 12 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-14: Application layer service definition - Type 14 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-15: Application layer service definition - Type 15 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-18: Application layer service definition - Type 18 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-19: Application layer service definition - Type 19 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 5-20: Application layer service definition - Type 20 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-2: Application layer protocol specification - Type 2 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-3: Application layer protocol specification - Type 3 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-10: Application layer protocol specification - Type 10 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-12: Application layer protocol specification - Type 12 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-14: Application layer protocol specification - Type 14 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-15: Application layer protocol specification - Type 15 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-18: Application layer protocol specification - Type 18 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-19: Application layer protocol specification - Type 19 elements TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-20: Application layer protocol specification - Type 20 elements TC 65C IEC :2010 /A 1:2012 ( Ed 1.0 ) Industrial communication networks - High availability automation networks Part 1: General concepts and calculation methods TC 77B IEC :2006 ( Ed 1.0 ) CONSOLIDADA Electromagnetic compatibility (EMC) Part 4-18:Testing and measurement techniques - Damped oscillatory wave immunity test TC 77A IEC/TR 60725:2012 ( Ed 3.0 ) Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current =75 A per phase TC 86A IEC :2012 ( Ed 1.0 ) Optical fibre cables Part 1-22: Generic specification -Basic optical cable test procedures - Environmental test methods TC 86A IEC :2012 ( Ed 2.0 ) Optical fibre cables Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling TC 86A IEC :2012 ( Ed 2.0 ) Optical fibres cables Part 2-21: Indoor optical fibre cables Detailed specification for multi-fibre optical distribution cables for use in premises cabling TC 65C IEC :2010 ( Ed 2.0 ) specifications Part 6-9: Application layer protocol specification - Type 9 elements TC 86B IEC :2012 ( Ed 1.0 ) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 28: Type LF3 connector family Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

62 TC 86C IEC :2012 ( Ed 2.0 ) Fibre optic sensors Part 1: Generic specification TC 86C IEC/TR :2012 ( Ed 1.0 ) Fibre optic communication system design guides Part 11: Multimode launch conditions TC CISPR/A CISPR :2003 ( Ed 1.0 ) CONSOLIDADA Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to MHz TC CISPR/A CISPR :2003 /A 1:2012 ( Ed 1.0 ) Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to MHz TC 1 IEC :2011 ( Ed 1.0 ) International Electrotechnical Vocabulary Part 802: Ultrasonics TC 2 IEC :2012 ( Ed 2.0 ) Rotating electrical machines Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines TC 2 IEC :2012 ( Ed 1.0 ) Rotating electrical machines Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems TC 9 IEC :2012 ( Ed 3.0 ) Electronic railway equipment - Train communication network (TCN) Part 1: General architecture TC 9 IEC :2012 ( Ed 1.0 ) Electronic railway equipment - Train communication network (TCN) Part 2-1: Wire Train Bus (WTB) TC 9 IEC :2012 ( Ed 1.0 ) Electronic railway equipment - Train communication network (TCN) Part 2-2: Wire Train Bus conformance testing TC 9 IEC :2012 ( Ed 1.0 ) Electronic railway equipment - Train communication network (TCN) Part 3-1: Multifunction Vehicle Bus (MVB) TC 9 IEC :2012 ( Ed 1.0 ) Electronic railway equipment - Train communication network (TCN) Part 3-2: MVB - (Multipurpose vehicle bus) conformance testing TC 9 IEC :2012 ( Ed 1.0 ) Electronic railway equipment - Train communication network (TCN) Part 3-3: CANopen Consist Network (CCN) TC 9 IEC 62621:2011 ( Ed 1.0 ) Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems TC 14 IEC 62032:2012 ( Ed 2.0 ) Guide for the Application, Specification and Testing of Phase-Shifting Transformers TC 20 IEC :2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 406: Miscellaneous tests - Resistance to environmental stress cracking of polyethylene and polypropylene compounds TC 20 IEC :2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 606: Physical Tests - Methods for determining the density TC 20 IEC :2012 ( Ed 1.0 ) Electric and optical fibre cables - Test methods for non-metallic materials Part 607: Physical Tests - Test for the assessment of carbon black dispersion in Polyethylene and Polypropylene TC 22 IEC/TR :2011 ( Ed 4.0 ) Semiconductor converters - General requirements and line commutated converters Part 1-2: Application guide TC 26 IEC :2012 ( Ed 4.0 ) Arc welding equipment Part 1: Welding power sources TC 28 IEC :2006 ( Ed 8.0 ) CONSOLIDADA Insulation co-ordination Part 1: Definitions, principles and rules TC 33 IEC :2012 ( Ed 1.0 ) Coupling capacitors and capacitor dividers Part 1: Common clauses TC 45 IEC 62495:2011 ( Ed 1.0 ) Nuclear instrumentation - Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube TC 49 IEC/TS :2011 ( Ed 2.0 ) Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 2: Piezoelectric and dielectric filters TC 49 IEC/TS :2011 ( Ed 2.0 ) Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics TC 55 IEC :2012 ( Ed 1.0 ) Specifications for particular types of winding wires Part 60: Polyester glass fibres wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire, temperature index 155 TC 56 IEC 61124:2012 ( Ed 3.0 ) Reliability testing - Compliance tests for constant failure rate and constant failure intensity Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

63 TC 57 IEC/TR :2012 ( Ed 1.0 ) Communication networks and systems for power utility automation Part 90-5: Use of IEC to transmit synchrophasor information according to IEEE C TC 57 IEC/TS :2011 ( Ed 2.0 ) Application integration at electric utilities - System interfaces for distribution management Part 2: Glossary TC 61 IEC :2012 ( Ed 3.0 ) Household and similar electrical appliances - Safety Part 2-17: Particular requirements for heated blankets, pads and similar flexible heating appliances TC 61 IEC :2006 ( Ed 2.0 ) CONSOLIDADA Household and similar electrical appliances - Safety Part 2-103: Particular requirements for drives for gates, doors and windows TC 64 IEC :2011 ( Ed 1.0 ) Low-voltage electrical installations Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces TC 66 IEC :2012 ( Ed 1.0 ) Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-091: Particular requirements for cabinet x-ray systems TC 68 IEC :1991 /A 2:2012 ( Ed 1.0 ) Magnetic materials Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip TC 72 IEC :2008 ( Ed 3.0 ) CONSOLIDADA Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls TC 72 IEC :2008 /A 1:2011 ( Ed 3.0 ) Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls TC 76 IEC :2007 /IS H:2011 ( Ed 2.0 ) Safety of laser products Part 1: Equipment classification and requirements TC 76 IEC :2006 ( Ed 2.0 ) CONSOLIDADA Safety of laser products Part 4: Laser guards TC 78 IEC 60900:2012 ( Ed 3.0 ) Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. TC 80 IEC :2012 ( Ed 3.0 ) Global maritime distress and safety system (GMDSS) Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results TC 80 IEC :2012 ( Ed 1.0 ) Global maritime distress and safety system (GMDSS) Part 15: Inmarsat FB500 ship earth station - Operational and performance requirements, methods of testing and required test results TC 80 IEC 62729:2012 ( Ed 1.0 ) Maritime navigation and radiocommunication equipment and systems - Shipborne equipment for long-range identification and tracking (LRIT) - Performance requirements TC 87 IEC 62558:2011 ( Ed 1.0 ) Ultrasonics - Real-time pulse-echo scanners - Phantom with cylindrical, artificial cysts in tissue-mimicking material and method for evaluation and periodic testing of 3D-distributions of void-detectability ratio (VDR) TC 89 IEC :2012 ( Ed 4.0 ) Fire hazard testing Part 4: Terminology concerning fire tests for electrotechnical products TC 91 IEC :2011 ( Ed 1.0 ) Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 3-913: Test methods for interconnection structures (printed boards) - Electronic circuit board for high-brightness LEDs TC 91 IEC/PAS :2011 ( Ed 1.0 ) Printed boards Part 20: Electronic circuit board for high-brightness LEDs TC 93 IEC 61445:2012 ( Ed 1.0 ) Digital Test Interchange Format (DTIF) TC 93 IEC :2012 ( Ed 2.0 ) Delay and power calculation standards Part 1: Integrated circuit delay and power calculation systems TC 93 IEC 61671:2012 ( Ed 1.0 ) Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML TC 93 IEC 62243:2012 ( Ed 2.0 ) Artificial Intelligence Exchange and Service Tie to All Test Environments (AI-ESTATE) TC 93 IEC 62529:2012 ( Ed 2.0 ) Standard for Signal and Test Definition TC 93 IEC 62531:2012 ( Ed 2.0 ) Property Specification Language (PSL) TC 100 IEC :2012 ( Ed 1.0 ) Cable networks for television signals, sound signals and interactive services Part 13-1: Bandwidth expansion for broadcast signal over FTTH system TC 100 IEC 62665:2012 ( Ed 1.0 ) Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Texture map for auditory presentation of printed texts TC 100 IEC 62684:2011 ( Ed 1.0 ) Interoperability specifications of common external power supply Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

64 (EPS) for use with data-enabled mobile telephones TC 101 IEC/TR :2012 ( Ed 1.0 ) Electrostatics Part 1: Electrostatic phenomena - Principles and measurements TC 105 IEC :2012 ( Ed 2.0 ) Fuel cell technologies Part 2: Fuel cell modules TC 17B IEC :2009 /A 1:2012 ( Ed 3.0 ) Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters TC 17B IEC :2011 /CORRIGENDUM Jul:2012 ( Ed 3.0 Low-voltage switchgear and controlgear Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters TC 105 IEC :2012 ( Ed 1.0 ) Fuel cell technologies Part 3-300: Stationary fuel cell power systems - Installation TC 105 IEC/PAS :2011 ( Ed 1.0 ) Fuel cell technologies Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells TC 107 IEC/PAS :2011 ( Ed 1.0 ) Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 1: Lead-free management TC 107 IEC/PAS :2011 ( Ed 1.0 ) Process management for avionics - Aerospace and defence electronic systems containing lead-free solder Part 2: Mitigation of the deleterious effects of tin TC 107 IEC/PAS :2011 ( Ed 1.0 ) Process management for avionics - Aerospace qualified electronic components (AQEC) Part 1: General requirements for high reliability integrated circuits and discrete semiconductors TC 108 IEC :2005 /A 1:2009 ( Ed 2.0 ) CONSOLIDADA Information technology equipment - Safety Part 1: General requirements TC 108 IEC/TR :2011 ( Ed 1.0 ) Audio/video, information and communication technology equipment Part 2: Explanatory information related to IEC TC 110 IEC :2012 ( Ed 1.0 ) Liquid crystal display devices Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type TC 111 IEC 62474:2012 ( Ed 1.0 ) Material declaration for products of and for the electrotechnical industry TC 113 IEC/TS :2012 ( Ed 1.0 ) Nanomanufacturing - Key control characteristics Part 2-1: Carbon nanotube materials - Film resistance TC 116 IEC :2006 ( Ed 2.0 ) CONSOLIDADA Hand-held motor-operated electric tools - Safety Part 2-13: Particular requirements for chain saws TC 17B IEC :2009 ( Ed 3.0 ) CONSOLIDADA Low-voltage switchgear and controlgear Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters TC 17B IEC :2011 /CORRIGENDUM Jul:2012 ( Ed 1.0 ) Low-voltage switchgear and controlgear - Device profiles for networked industrial devices Part 2: Root device profiles for starters and similar equipment TC 34A IEC :2012 ( Ed 2.0 ) Incandescent lamps - Safety specifications Part 3:Tungsten-halogen lamps (non-vehicle) TC 34A IEC 60809:1995 /A 5:2012 ( Ed 2.0 ) Lamps for road vehicles - Dimensional, electrical and luminous requirements TC 34A IEC 61549:2003 /A 3:2012 ( Ed 2.0 ) Miscellaneous lamps TC 34A IEC 62035:1999 ( Ed 1.0 ) CONSOLIDADA Discharge lamps (excluding fluorescent lamps) - Safety specifications TC 34A IEC 62035:1999 /A 2:2012 ( Ed 1.0 ) Discharge lamps (excluding fluorescent lamps) - Safety specifications TC 37A IEC :2000 ( Ed 1.0 ) Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods TC 37A IEC :2000 /A 2:2012 ( Ed 1.0 ) CONSOLIDADA Low voltage surge protective devices Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods TC 46F IEC :2012 ( Ed 1.0 ) Radio-frequency connectors Part 47: Sectional specification - Radio frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) TC 46C IEC/TR 62222:2012 ( Ed 2.0 ) Fire performance of communication cables installed in buildings TC 48D IEC :2012 ( Ed 1.0 ) Modular order for the development of mechanical structures for electronic equipment practices Part 2-5: Cabinet interface dimensions for miscellaneous equipment Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

65 TC 61C IEC :2010 ( Ed 2.0 ) CONSOLIDADA Household and similar electrical appliances - Safety Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor TC 61C IEC :2010 /A 1:2012 ( Ed 2.0 ) Household and similar electrical appliances - Safety Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor TC 62A IEC :2005 /A 1:2012 ( Ed 3.0 ) Medical electrical equipment Part 1: General requirements for basic safety and essential performance TC 62A IEC/TR :2012 ( Ed 1.0 ) Application of risk management for IT-networks incorporating medical devices Part 2-1: Step by step risk management of medical IT-networks - Pratical applications and examples TC 62A IEC/TR :2012 ( Ed 1.0 ) Application of risk management for IT-networks incorporating medical devices Part 2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls TC 62A IEC/TR :2012 ( Ed 1.0 ) Application of risk management for IT-networks incorporating medical devices Part 2-3: Guidance for wireless networks TC 65A IEC :2012 ( Ed 2.0 ) Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements TC 65A IEC :2012 ( Ed 2.0 ) Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning TC 65A IEC :2012 ( Ed 2.0 ) Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC and for equipment for insulation fault location according to IEC TC 65A IEC :2012 ( Ed 2.0 ) Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment TC 65E IEC :2012 ( Ed 1.0 ) Industrial-process measurement and control - Data structures and elements in process equipment catalogues Part 11: List of properties (LOP) of measuring equipment for electronic data exchange - Generic structures TC 65C IEC :2012 ( Ed 2.0 ) Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) TC 65E IEC :2012 ( Ed 1.0 ) OPC unified architecture Part 7: Profiles TC 65E IEC :2012 ( Ed 1.0 ) OPC unified architecture Part 9: Alarms and conditions TC 65E IEC :2012 ( Ed 1.0 ) OPC unified architecture Part 10: Programs TC 86B IEC :2012 ( Ed 4.0 ) Fibre optic interconnecting devices and passive components - Fibre optic spatial switches Part 1: Generic specification TC 86B IEC :2012 ( Ed 3.0 ) Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures TC 86B IEC :2012 ( Ed 1.0 ) Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 26: Type SF connector family TC 86C IEC :2012 ( Ed 1.0 ) Fibre optic active components and devices - Test and measurement procedures Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces TC 86B IEC/TR :2012 ( Ed 1.0 ) Fibre optic interconnecting devices and passive components Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector TC CISPR/A CISPR :2010 ( Ed 3.0 ) CONSOLIDADA Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements TC CISPR/A CISPR :2010 /A 1:2012 ( Ed 3.0 ) Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements TC CISPR/A CISPR/TR 16-3:2010 ( Ed 3.0 ) CONSOLIDADA Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports TC CISPR/A CISPR/TR 16-3:2010 /A 1:2012 ( Ed 3.0 ) Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports TC 9 IEC :2012 ( Ed 1.0 ) Railway applications - Rolling stock equipment - Capacitors for power electronics Part 3: Electric double-layer capacitors TC 14 IEC :2012 ( Ed 1.0 ) Power transformers Part 18: Measurement of frequency response Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

66 TC 15 IEC :2008 ( Ed 3.0 ) CONSOLIDADA Combined flexible materials for electrical insulation Part 3: Specifications for individual materials TC 15 IEC :2008 /A 1:2012 ( Ed 3.0 ) Combined flexible materials for electrical insulation Part 3: Specifications for individual materials TC 15 IEC :2012 ( Ed 3.0 ) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets TC 18 ISO/IEC :2012 ( Ed 1.0 ) Utility connections in port Part 1: High Voltage Shore Connection (HVSC) Systems -- General requirements TC 20 IEC :2012 ( Ed 2.0 ) Electric cables - Calculation of the current rating Part 3-2: Sections on operating conditions - Economic optimization of power cable size TC 22 IEC :2012 ( Ed 1.0 ) Safety requirements for power electronic converter systems and equipment Part 1: General TC 29 IEC 62585:2012 ( Ed 1.0 ) Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter TC 31 IEC :2010 /CORRIGENDUM Jul:2012 ( Ed 1.0 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification - Test methods and data TC 40 IEC 60294:2012 ( Ed 2.0 ) Measurement of the dimensions of a cylindrical component with axial terminations TC 40 IEC 60301:2012 ( Ed 3.0 ) Preferred diameters of wire terminations of capacitors and resistors TC 40 IEC 60440:2012 ( Ed 1.0 ) Method of measurement of non-linearity inresistors TC 46 IEC :2012 ( Ed 1.0 ) Passive r.f. and microwave devices, intermodulation level measurement Part 3: Measurement of passive intermodulation in coaxial connectors TC 46 IEC :2012 ( Ed 1.0 ) Passive r.f. and microwave devices, intermodulation level measurement Part 4: Measurement of passive intermodulation in coaxial cables TC 49 IEC 61240:2012 ( Ed 2.0 ) Piezoelectric devices - Preparation of outline drawings of surface-mounted device (SMD) for frequency control and selection - General rules TC 55 IEC :2012 ( Ed 1.0 ) Specifications for particular types of winding wires Part 0-8: General requirements - Polyester glass-fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire TC 55 IEC :2012 ( Ed 4.0 ) Specifications for particular types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer TC 55 IEC :2012 ( Ed 2.0 ) Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 TC 55 IEC :2012 ( Ed 2.0 ) Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 TC 55 IEC :2012 ( Ed 2.0 ) Specifications for particular types of winding wires Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 TC 55 IEC :2012 ( Ed 1.0 ) Specifications for particular types of winding wires Part 61: Polyester glass fibres wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 TC 55 IEC :2012 ( Ed 1.0 ) Specifications for particular types of winding wires Part 62: Polyester glass fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 TC 59 IEC/PAS :2008 /CORRIGENDUM Jul:2012 ( Ed.1) Household and similar electrical appliances - Test code for the determination of airborne acoustical noise Part 2-15: Particular requirements for household food waste disposers TC 77 IEC/TR :2012 ( Ed 1.0 ) Electromagnetic compatibility (EMC) Part 1-6: General - Guide to the assessment of measurement uncertainty TC 80 IEC 62616:2010 /CORRIGENDUM Jul:2012 ( Ed 1.0 ) Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) TC 90 IEC :2012 ( Ed 2.0 ) Superconductivity Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites TC 100 IEC :2012 ( Ed 1.0 ) Cable networks for television signals, sound signals and interactive services Part 3-1: Methods of measurement of non-linearity for full digital channel load with DVB-C signals Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

67 TC 100 IEC/TS 62592:2012 ( Ed 2.0 ) Encoding guidelines for portable multimedia CE products using MP4 file format with AVC video codec and AAC audio codec TC 105 IEC :2012 ( Ed 2.0 ) Fuel cell technologies Part 6-200: Micro fuel cell power systems - Performance test methods TC 107 IEC/TS :2012 ( Ed 1.0 ) Process management for avionics - Management plan Part 1: Preparation and maintenance of an electronic components management plan TC 112 IEC :2012 ( Ed 3.0 ) Electrical insulating materials - Guide for determining of the effects of ionizing radiation on insulating materials Part 2: Procedures for irradiation and test TC 116 IEC :2006 ( Ed 2.0 ) Hand-held motor-operated electric tools - Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders TC 116 IEC :2006 /A 2:2012 ( Ed 2.0 ) Hand-held motor-operated electric tools - Safety Part 2-3: Particular requirements for grinders, polishers and disk-type sanders Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

68 ISO TC 6 ISO 536:2012 ( Ed 3 ) Paper and board Determination of grammage TC 20 ISO 8816:1993 ( Ed 1 ) Aircraft Solid-state remote power controllers General requirements TC 20 ISO 8843:2005 ( Ed 2 ) Aircraft Crimp-removable contacts for electrical connectors Identification system TC 23 ISO :2012 ( Ed 1 ) Agricultural machinery Safety Part 12: Rotary disc and drum mowers and flail mowers TC 31 ISO 9413:2012 ( Ed 2 ) Tyre valves Dimensions and designation TC 35 ISO :2012 ( Ed 2 ) Paints and varnishes Determination of resistance to liquids Part 3: Method using an absorbent medium TC 35 ISO :2012 ( Ed 1 ) Paints and varnishes Drying tests Part 6: Print-free test TC 35 ISO 13076:2012 ( Ed 1 ) Paints and varnishes Lighting and procedure for visual assessments of coatings TC 35 ISO 13632:2012 ( Ed 1 ) Binders for paints and varnishes Rosin Sampling and sample preparation for colour measurement TC 38 ISO :2012 ( Ed 2 ) Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 1: Water-containing fluids TC 41 ISO 9856:2003 /A 1:2012 ( Ed 1 ) Conveyor belts Determination of elastic and permanent elongation and calculation of elastic modulus AMENDMENT 1 TC 44 ISO 5172:2006 /A 1:2012 ( Ed 1 ) Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests AMENDMENT 1 TC 44 ISO 13585:2012 ( Ed 1 ) Brazing Qualification test of brazers and brazing operators TC 44 ISO :2012 ( Ed 2 ) Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding TC 59 ISO 6927:2012 ( Ed 2 ) Buildings and civil engineering works Sealants Vocabulary TC 61 ISO :2009 /A 1:2012 ( Ed 1 ) Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles AMENDMENT 1 TC 61 ISO :2012 ( Ed 3 ) Plastics Epoxy resins Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins TC 61 ISO :2012 ( Ed 3 ) Plastics Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm TC 61 ISO :2012 ( Ed 1 ) Plastics Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography Part 5: Method using light-scattering detection TC 106 ISO 6876:2012 ( Ed 3 ) Dentistry Root canal sealing materials TC 106 ISO 13017:2012 ( Ed 1 ) Dentistry Magnetic attachments TC 106 ISO 13504:2012 ( Ed 1 ) Dentistry General requirements for instruments and related accessories used in dental implant placement and treatment TC 119 ISO 2739:2012 ( Ed 3 ) Sintered metal bushings Determination of radial crushing strength TC 135 ISO 9712:2012 ( Ed 4 ) Non-destructive testing Qualification and certification of NDT personnel TC 145 ISO 7010:2011 /A 1:2012 ( Ed 1 ) Graphical symbols Safety colours and safety signs Registered safety signs TC 147 ISO 10870:2012 ( Ed 1 ) Water quality Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters TC 147 ISO :2012 ( Ed 1 ) Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) TC 147 ISO :2012 ( Ed 1 ) Water quality Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA) TC 159 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

69 ISO :2008 /A 1:2012 ( Ed 1 ) Ergonomics of human-system interaction Part 410: Design criteria for physical input devices Amendment 1 TC 10 ISO 11005:2010 ( Ed 1 ) Technical product documentation Use of main documents TC 172 ISO 11987:2012 ( Ed 2 ) Ophthalmic optics Contact lenses Determination of shelf-life TC 188 ISO :2012 ( Ed 1 ) Small craft Hull construction and scantlings Part 9: Sailing craft appendages TC 194 ISO :2012 ( Ed 4 ) Biological evaluation of medical devices Part 12: Sample preparation and reference materials TC 195 ISO 19432:2012 ( Ed 2 ) Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements TC 210 ISO :2012 ( Ed 2 ) Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements TC 213 ISO :2012 ( Ed 1 ) Geometrical product specifications (GPS) Surface texture: Areal Part 3: Specification operators ISO :2012 ( Ed 1 ) Leather Physical and mechanical test methods for the determination of soiling Part 2: Tumbling method TC 10 ISO :1999 ( Ed 1 ) Technical drawings General principles of presentation Part 22: Basic conventions and applications for leader lines and reference lines TC 10 ISO :2001 ( Ed 1 ) Technical drawings General principles of presentation Part 30: Basic conventions for views TC 10 ISO :2001 ( Ed 1 ) Technical drawings General principles of presentation Part 34: Views on mechanical engineering drawings TC 10 ISO :2001 ( Ed 1 ) Technical drawings General principles of presentation Part 40: Basic conventions for cuts and sections TC 10 ISO :2001 ( Ed 1 ) Technical drawings General principles of presentation Part 44: Sections on mechanical engineering drawings TC 10 ISO :2001 ( Ed 1 ) Technical drawings General principles of presentation Part 50: Basic conventions for representing areas on cuts and sections TC 10 ISO 7200:2004 ( Ed 2 ) Technical product documentation Data fields in title blocks and document headers TC 10 ISO :2005 ( Ed 2 ) Graphical symbols for diagrams Part 1: General information and indexes TC 10 ISO :2004 ( Ed 1 ) Graphical symbols for diagrams Part 13: Devices for material processing TC 10 ISO :2004 ( Ed 1 ) Graphical symbols for diagrams Part 14: Devices for transport and handling of material TC 10 ISO :2002 ( Ed 1 ) Graphical symbols for diagrams Part 15: Installation diagrams and network maps TC 10 ISO :2010 ( Ed 1 ) Specification for diagrams for process industry Part 1: General rules TC 10 ISO 16792:2006 ( Ed 1 ) Technical product documentation Digital product definition data practices TC 21 ISO 5923:2012 ( Ed 3 ) Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide TC 28 ISO 2137:2007 ( Ed 3 ) Petroleum products and lubricants Determination of cone penetration of lubricating greases and petrolatum TC 31 ISO 7295:1988 ( Ed 2 ) Tyre valves for aircraft Interchangeability dimensions TC 33 ISO :2012 ( Ed 1 ) Monolithic (unshaped) refractory products Part 1: Introduction and classification TC 34 ISO 11747:2012 ( Ed 1 ) Rice Determination of rice kernel resistance to extrusion after cooking TC 35 ISO :2012 ( Ed 1 ) Paints and varnishes Drying tests Part 4: Test using a mechanical recorder TC 35 ISO :2012 ( Ed 1 ) Paints and varnishes Drying tests Part 5: Modified Bandow-Wolff test TC 38 ISO 1140:2012 ( Ed 4 ) Fibre ropes Polyamide 3-, 4-, 8- and 12-strand ropes TC 38 ISO 1141:2012 ( Ed 4 ) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

70 Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes TC 38 ISO 1346:2012 ( Ed 4 ) Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes TC 42 ISO 18913:2012 ( Ed 2 ) Imaging materials Permanence Vocabulary TC 209 ISO :2012 ( Ed 1 ) Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration TC 213 ISO 13102:2012 ( Ed 1 ) Geometrical product specifications (GPS) Dimensional measuring equipment: Electronic digital-indicator gauge Design and metrological characteristics TC 51 ISO :2011 ( Ed 2 ) Pallets for materials handling Flat pallets Part 1: Test methods TC 51 ISO :2011 ( Ed 1 ) Pallets for materials handling Flat pallets Part 2: Performance requirements and selection of tests TC 51 ISO :2011 ( Ed 1 ) Pallets for materials handling Flat pallets Part 3: Maximum working loads TC 61 ISO 17556:2012 ( Ed 2 ) Plastics Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved TC 104 ISO 6346:1995 ( Ed 3 ) Freight containers Coding, identification and marking TC 115 ISO :2012 ( Ed 1 ) Liquid pumps and installation General terms, definitions, quantities, letter symbols and units Part 1: Liquid pumps TC 219 ISO 10874:2009 ( Ed 1 ) Resilient, textile and laminate floor coverings Classification TC 221 ISO 10772:2012 ( Ed 1 ) Geotextiles Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions TC 221 ISO 10776:2012 ( Ed 1 ) Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, under load ISO 17131:2012 ( Ed 1 ) Leather Identification of leather with microscopy ISO/IEC TC CASCO ISO/IEC 17024:2012 ( Ed 2 ) Conformity assessment - General requirements for bodies operating certification of persons TC 115 ISO :2012 ( Ed 1 ) Liquid pumps and installation General terms, definitions, quantities, letter symbols and units Part 2: Pumping system TC 118 ISO :2012 ( Ed 1 ) Hand-held non-electric power tools Safety requirements Part 7: Grinders TC 121 ISO 8359:1996 /A 1:2012 ( Ed 1 ) Oxygen concentrators for medical use Safety requirements AMENDMENT 1 TC 138 ISO :2011 ( Ed 1 ) Plastics piping systems for renovation of underground gas supply networks Part 1: General TC 146 ISO :2012 ( Ed 1 ) Indoor air Part 26: Sampling strategy for carbon dioxide (CO2) TC 204 ISO 17263:2012 ( Ed 1 ) Intelligent transport systems Automatic vehicle and equipment identification System parameters TC 205 ISO :2012 ( Ed 4 ) Building automation and control systems Part 5: Data communication protocol Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

71 4. Projetos de normas portuguesas Os projetos de normas estão organizadas por Grupos classificativos, indicando-se a referência e o respetivo título. 4.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a correspondência europeia ou internacional, quando exista, e a data limite para a apresentação de comentários. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

72 4.2 Projetos anulados Para cada referência menciona-se a designação, a correspondência europeia e/ou internacional, bem como o documento que o substitui, quando exista. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

73 5. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS) Os projetos de normas e as propostas de estudo de novas normas estão organizadas por "Comités" Técnicos do CEN e do ECISS. 5.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. pren 16252:2012 Machines for compacting waste materials or recyclable fractions Horizontal baling presses Safety requirements Data Limite: pren 16281:2012 Child protective products Consumer fitted child resistant locking devices for windows and balcony doors Safety requirements and test methods Data Limite: pren 16310:2012 Engineering services Terminology to describe engineering services for buildings, infrastructure and industrial facilities Data Limite: pren 16311:2012 Engineering services Terminology to describe engineering services for industrial products Data Limite: pren ISO/IEC 17067:2012 Conformity assessment Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC/DIS 17067:2012) Data Limite: TC 10 pren 12015:2012 Electromagnetic compatibility Product family standard for lifts, escalators ans moving walks Emission Data Limite: TC 10 pren 12159:2012 Builders hoists for persons and materials with vertically guided cages Data Limite: TC 10 pren ISO 14798:2011 Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology (ISO 14798:2009) Data Limite: TC 10 pren ISO :2012 Energy performance of lifts, escalators and moving walks Part 1: Energy measurement and verification (ISO/FDIS :2012) Data Limite: pren ISO :2012 Petroleum and natural gas industries Completion fluides and materials Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions (ISO/FDIS :2012) Data Limite: TC 12 EN ISO 19902:2007 /pra 1:2012 Petroleum and natural gas industries Fixed steel offshore structures (ISO 19902:2007/DAM 1:2012) Data Limite: TC 19 prcen/tr 16435:2012 Liquid petroleum products Oxygenates blending in line with actual EN 228 requirements Data Limite: TC 19 pren 1601:2012 Liquid petroleum products Unleaded petrol Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) Data Limite: TC 19 pren 12662:2012 Liquid petroleum products Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters Data Limite: TC 19 pren 14274:2012 Automotive fuels Assessment of petrol and diesel quality Fuel quality monitoring system (FQMS) Data Limite: TC 19 pren 14275:2012 Automotive fuels Assessment of petrol and diesel fuel quality Sampling from retail site pumps and commercial site fuel dispensers Data Limite: TC 19 pren 15721:2012 Ethanol as a blending component for petrol Determination of higher alcohols, methanol and volatile impurities Gas chromatographic method Data Limite: TC 12 TC 19 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

74 pren 16294:2012 Petroleum products and fat and oil derivatives Determination of phosphorus content in fatty acid methyl esters (FAME) Optical emission spectral analysis with inductively coupled plasma (ICP OES) Data Limite: TC 19 pren 16423:2012 Liquefied petroleum gases Determination of dissolved residue Gas chromatographic method using liquid, oncolumn injection Data Limite: TC 19 pren ISO 5163:2012 Petroleum products Determination of knock characteristics of motor and aviation fuels Motor method (ISO/DIS 5163:2012) Data Limite: TC 19 pren ISO 5164:2012 Petroleum products Determination of knock characteristics of motor fuels Research method (ISO/DIS 5164:2012) Data Limite: TC 19 pren ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO/FDIS 12922:2012) Data Limite: TC 19 pren ISO 22854:2012 Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline Multidimensional gas chromatography method (ISO/DIS 22854:2012) Data Limite: TC 23 pren ISO 3807:2012 Gas cylinders Acetylene cylinders Basic requirements and type testing (ISO/DIS 3807:2012) Data Limite: TC 23 EN ISO 7225:2007 /pra 1:2012 Gas cylinders Precautionary labels (ISO 7225:2005/FDAM 1:2012) Data Limite: TC 23 pren ISO 10297:2012 Gas cylinders Cylinder valves Specification and type testing (ISO/DIS 10297:2012) Data Limite: TC 23 pren ISO 10462:2012 Gas cylinders Acetylene cylinders Periodic inspection and maintenance (ISO/DIS 10462:2012) Data Limite: TC 23 pren ISO 11120:2012 Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design construction and testing (ISO/DIS 11120:2012) Data Limite: TC 23 pren ISO 13088:2012 Gas cylinders Acetylene cylinder bundles Filling conditions and filling inspection (ISO 13088:2011) Data Limite: TC 23 EN ISO :2001 /pra 1:2012 Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification (ISO :2001/DAM 1:2012) Data Limite: TC 33 pren 1191:2012 Windows and doors Resistance to repeated opening and closing Test method Data Limite: TC 33 pren 1527:2012 Building hardware Hardware for sliding doors and folding doors Requirements and test methods Data Limite: TC 33 pren 1935:2012 Building hardware Single-axis hinges Requirements and test methods Data Limite: TC 33 pren 12428:2012 Industrial, commercial and garage doors Thermal transmittance Requirements for the calculation Data Limite: TC 33 EN 13120:2009 /pra 1:2012 Internal blinds Performance requirements including safety Data Limite: TC 33 pren 15684:2012 Building hardware Mechatronic cylinders Requirements and test methods Data Limite: TC 33 pren 16035:2012 Hardware performance sheet (HPS) Identification and summary of test evidence to facilitate the interchangeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows Data Limite: TC 33 pren 16433:2012 Internal blinds Protection from strangulation hazards Test methods Data Limite: TC 33 pren 16434:2012 Internal blinds Protection from strangulation hazards Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

75 Requirements and Test methods for safety devices Data Limite: TC 38 pren 252:2012 Field test method for determining the relative protective effectiveness of a wood preservative in ground contact Data Limite: TC 47 pren 267:2012 Forced draught burners for liquid fuels Data Limite: TC 47 pren ISO :2012 Safety and control devices for oil burners and oil burning appliances Particular requirements Part 1: Automatic and semi-automatic valves (ISO/DIS :2012) Data Limite: TC 49 EN :2008+A2:2010 /pra 3:2012 Domestic cooking appliances burning gas Part 1-1: Safety - General Data Limite: TC 50 pren :2012 Lighting columns Part 3-1: Design and verification - Specification for characteristic loads Data Limite: TC 50 pren :2012 Lighting columns Design and verification Part 3-2: Verification by testing Data Limite: TC 50 pren :2012 Lighting columns Design and verification Part 3-3: Verification by calculation Data Limite: TC 51 pren :2012 Hydraulic road binders Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria Data Limite: TC 51 pren :2012 Hydraulic road binders Part 3: Conformity evaluation Data Limite: TC 52 EN 71-1:2011 /pra 1:2012 Safety of toys Part 1: Mechanical and physical properties Amendment 1: "Legibility of warnings" including "correction of specification for Gauss-meter" Data Limite: TC 52 EN 71-1:2011 /pra 2:2012 Safety of toys Part 1: Mechanical and physical properties Amendment 2: Acoustics Data Limite: TC 52 EN 71-1:2011 /pra 3:2012 Safety of toys Part 1: Mechanical and physical properties Amendment 3: Toy books Data Limite: TC 52 pren 71-3:2012 Safety of toys Part 3: Migration of certain elements Data Limite: TC 52 pren 71-5:2012 Safety of toys Part 5: Chemical toys (sets) other than experimental sets Data Limite: TC 52 pren 71-12:2012 Safety of toys Part 12: N-nitrosamines and N-nitrosatable substances Data Limite: TC 52 pren 71-13:2012 Safety of toys Part 13: Olfactory board games, gustative board games, cosmetic kits and gustative kits Data Limite: TC 52 pren 71-14:2012 Safety of toys Part 14: Trampolines for domestic use Data Limite: TC 53 pren :2012 Temporary works equipment Part 4: Protection fans for scaffolds - Performance requirements and product design Data Limite: TC 54 EN :2009 /pra 2:2012 Unfired pressure vessels Part 3: Design Data Limite: TC 54 EN :2009 /pra 5:2012 Unfired pressure vessels Part 3: Design Data Limite: TC 54 EN :2009 /pra 2:2012 Unfired pressure vessels Part 4: Fabrication Data Limite: TC 55 pren ISO 3665:2012 Photography Intra-oral dental radiographic film and film packets Manufacturer specifications (ISO 3665:2011) Data Limite: TC 55 pren ISO 12836:2012 Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy (ISO/FDIS 12836:2012) Data Limite: TC 55 EN ISO :2005 /pra 1:2012 Dentistry Periodontal curettes, dental scalers and excavators Part 2: Periodontal curettes of Gr-type - Amendment 1: Colour coding (ISO :2005/FDAM 1:2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

76 Data Limite: TC 55 pren ISO 14457:2012 Dentistry Handpieces and motors (ISO/FDIS 14457:2012) Data Limite: TC 55 pren ISO 16498:2012 Dentistry Minimal dental implant data set for clinical use (ISO/DIS 16498:2012) Data Limite: TC 55 pren ISO 17304:2012 Dentistry Polymerisation shrinkage: Method for determination of polymerisation shrinkage of polymer-based restorative materials (ISO/DIS 17304:2012) Data Limite: TC 55 pren ISO :2012 Dentistry Periodontal probes Part 2: Designation (ISO/FDIS :2012) Data Limite: TC 55 pren ISO 28888:2012 Dentistry Screening method for erosion potential of oral rinses on dental hard tissues (ISO/DIS 28888:2012) Data Limite: TC 55 pren ISO 29022:2012 Dentistry Adhesion Notched-edge shear bond strength test (ISO/DIS 29022:2012) Data Limite: TC 58 EN 161:2011 /pra 1:2012 Automatic shut-off valves for gas burners and gas appliances Special requirements to determine performance level (PL) Data Limite: TC 70 pren :2012 Mobile fire extinguishers Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN Data Limite: TC 72 pren 54-31:2012 Fire detection and fire alarm system Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors Data Limite: TC 74 EN :2007 /pra 1:2012 Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 1: Steel flanges Data Limite: TC 79 pren 250:2012 Respiratory equipment Open-circuit self-contained compressed air diving apparatus Requirements, testing, marking Data Limite: TC 79 pren 12021:2012 Respiratory protective devices Compressed gases for breathing apparatus Data Limite: TC 88 pren 822:2012 Thermal insulating products for building applications Determination of length and width Data Limite: TC 88 pren 823:2012 Thermal insulating products for building applications Determination of thickness Data Limite: TC 88 pren 824:2012 Thermal insulating products for building applications Determination of squareness Data Limite: TC 88 pren 825:2012 Thermal insulating products for building applications Determination of flatness Data Limite: TC 88 pren 826:2012 Thermal insulating products for building applications Determination of compression behaviour Data Limite: TC 88 pren 1602:2012 Thermal insulating products for building applications Determination of the apparent density Data Limite: TC 88 pren 1603:2012 Thermal insulating products for building applications Determination of dimensional stability under constant normal laboratory conditions (23 C/ 50 % relative humidity) Data Limite: TC 88 pren 1604:2012 Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions Data Limite: TC 88 pren 1605:2012 Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions Data Limite: TC 88 pren 1606:2012 Thermal insulating products for building applications Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

77 Determination of compressive creep Data Limite: TC 88 pren 1607:2012 Thermal insulating products for building applications Determination of tensile strength perpendicular to faces Data Limite: TC 88 pren 1608:2012 Thermal insulating products for building applications Determination of tensile strength parallel to faces Data Limite: TC 88 pren 1609:2012 Thermal insulating products for building applications Determination of short term water absorption by partial immersion Data Limite: TC 88 pren 12085:2012 Thermal insulating products for building applications Determination of linear dimensions of test specimens Data Limite: TC 88 pren 12086:2012 Thermal insulating products for building applications Determination of water vapour transmission properties Data Limite: TC 88 pren 12087:2012 Thermal insulating products for building applications Determination of long term water absorption by immersion Data Limite: TC 88 pren 12088:2012 Thermal insulating products for building applications Determination of long term water absorption by diffusion Data Limite: TC 88 pren 12089:2012 Thermal insulating products for building applications Determination of bending behaviour Data Limite: TC 88 pren 12090:2012 Thermal insulating products for building applications Determination of shear behaviour Data Limite: TC 88 pren 12091:2012 Thermal insulating products for building applications Determination of freeze-thaw resistance Data Limite: TC 88 pren 12430:2012 Thermal insulating products for building applications Determination of behaviour under point load Data Limite: TC 88 pren 12431:2012 Thermal insulating products for building applications Determination of thickness for floating floor insulating products Data Limite: TC 88 pren 13162:2012 Thermal insulation products for buildings Factory made mineral wool (MW) products Specification Data Limite: TC 88 pren 13163:2012 Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification Data Limite: TC 88 pren 13164:2012 Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification Data Limite: TC 88 pren 13165:2012 Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification Data Limite: TC 88 pren 13166:2012 Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification Data Limite: TC 88 pren 13167:2012 Thermal insulation products for buildings Factory made cellular glass (CG) products Specification Data Limite: TC 88 pren 13168:2012 Thermal insulation products for buildings Factory made wood wool (WW) products Specification Data Limite: TC 88 pren 13169:2012 Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification Data Limite: TC 88 pren 13170:2012 Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification Data Limite: TC 88 pren 13171:2012 Thermal insulation products for buildings Factory made wood fibre (WF) products Specification Data Limite: TC 88 EN 14303:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification Data Limite: TC 88 EN 14304:2009 /pra 1:2012 Thermal insulation products for building equipment and Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

78 industrial installations Factory made flexible elastomeric foam (FEF) products Specification Data Limite: TC 88 EN 14305:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification Data Limite: TC 88 EN 14306:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification Data Limite: TC 88 EN 14307:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification Data Limite: TC 88 EN 14308:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification Data Limite: TC 88 EN 14309:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification Data Limite: TC 88 EN 14313:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification Data Limite: TC 88 EN 14314:2009 /pra 1:2012 Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification Data Limite: TC 88 pren :2012 Thermal insulating products for buildings In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Part 1: Specification for the rigid foam spray system before installation Data Limite: TC 88 pren :2012 Thermal insulating products for buildings In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Part 2: Specification for the installed insulation products Data Limite: TC 88 pren :2012 Thermal insulating products for buildings In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Part 1: Specification for the rigid foam dispensed system before installation Data Limite: TC 88 pren :2012 Thermal insulating products for buildings In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Part 2: Specification for the installed insulation products Data Limite: TC 88 pren :2012 Thermal insulating products for building equipment and industrial installations In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Part 1: Specification for the rigid foam dispensed system before installation Data Limite: TC 88 pren :2012 Thermal insulating products for building equipment and industrial installations In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Part 2: Specification for the installed insulation products Data Limite: TC 88 pren :2012 Thermal insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Part 1: Specification for the rigid foam spray system before installation Data Limite: TC 88 pren :2012 Thermal insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Part 2: Specification for the installed insulation products Data Limite: TC 88 pren 15501:2012 Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification Data Limite: TC 88 pren 15732:2012 Light weight fill and thermal insulation products for civil engineering applications (CEA) Expanded clay lightweight aggregate products (LWA) Data Limite: TC 88 pren 16069:2012 Thermal insulation products for buildings Factory made products of polyethylene foam (PEF) Specification Data Limite: TC 89 pren ISO 12569:2012 Thermal performance of buildings and materials Determination of specific airflow rate in buildings Tracer gas dilution method (ISO/FDIS 12569:2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

79 Data Limite: TC 89 EN ISO 12570:2000 /pra 1:2012 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Amendment 1 (ISO 12570:2000/DAM 1:2012) Data Limite: TC 89 pren ISO 12571:2012 Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties (ISO/DIS 12571:2012) Data Limite: TC 89 pren ISO 12571:2012 Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties (ISO/DIS 12571:2012) Data Limite: TC 89 pren ISO 12631:2012 Thermal performance of curtain walling Calculation of thermal transmittance (ISO/FDIS 12631:2012) Data Limite: TC 89 pren ISO 15758:2012 Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems (ISO/DIS 15758:2012) Data Limite: TC 92 pren ISO :2012 Water meters for cold potable water and hot water Part 1: Metrological and technical requirements (ISO/DIS :2012) Data Limite: TC 92 pren ISO :2012 Water meters for cold potable water and hot water Part 2: Test methods (ISO/DIS :2012) Data Limite: TC 92 pren ISO :2012 Water meters intended for the metering of cold potable water and hot water Part 3: Test report format (ISO/DIS :2012) Data Limite: TC 92 pren ISO :2012 Water meters intended for the metering of cold potable water and hot water Part 4: Non-metrological requirements not covered in ISO (ISO/DIS :2012) Data Limite: TC 92 pren ISO :2012 Water meters intended for the metering of cold potable water and hot water Part 5: Installation requirements (ISO/DIS :2012) Data Limite: TC 98 pren 280:2012 Mobile elevating work platforms Design calculations Stability criteria - Construction - Safety - Examinations and tests Data Limite: TC 102 pren 13060:2012 Small steam sterilizers Data Limite: TC 102 pren 14180:2012 Sterilizers for medical purposes Low temperature steam and formaldehyde sterilizers Requirements and testing Data Limite: TC 102 pren 16442:2012 Controlled environment storage cabinet for disinfected thermolabile endoscopes Data Limite: TC 102 pren ISO :2012 Sterilization of health care products Chemical indicators Part 1: General requirements (ISO/DIS :2012) Data Limite: TC 102 EN ISO :2009 /pra 1:2012 Washer-disinfectors Part 1: General requirements, terms and definitions and tests (ISO :2006/DAM 1:2012) Data Limite: TC 104 prcen/tr 16443:2012 Backgrounds to the revision of EN 450-1:2005+A1:2007 Fly ash for concrete Data Limite: TC 104 pren 206:2012 Concrete Specification, performance, production and conformity Data Limite: TC 104 pren :2012 Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 5: Concrete injection Data Limite: TC 104 pren :2012 Testing hardened concrete Part 13: Determination of secant modulus of elasticity in compression Data Limite: TC 106 pren 203-1:2012 Gas heated catering equipment Part 1: General safety rules Data Limite: TC 106 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

80 pren :2012 Gas heated catering equipment Part 2-7: Specific requirements - Salamanders and rotisseries Data Limite: TC 107 EN 488:2011 /pra 1:2012 District heating pipes Preinsulated bonded pipe systems for directly buried hot water networks Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene Data Limite: TC 113 prcen ISO/TR 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (ISO/DTR 16491:2012) TC 113 pren 12900:2012 Refrigerant compressors Rating conditions, tolerances and presentation of manufacturer's performance data Data Limite: TC 113 pren :2012 Testing methodologies of cooling equipment for insulated means of transportation Part 1: Mechanical refrigeration systems with forced air circulation evaporator or convection and optional heating devices Data Limite: TC 114 pren ISO :2012 Safety of machinery Safety-related parts of control systems Part 2: Validation (ISO/FDIS :2012) Data Limite: TC 114 pren ISO :2012 Safety of machinery Pressure-sensitive protective devices Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO/DIS :2012) Data Limite: TC 119 EN ISO 6346:1995 /pra 3:2012 Freight containers Coding, identification and marking Amendment 3 (ISO 6346:1995/FDAM 3:2012) Data Limite: TC 121 pren 14700:2012 Welding consumables Welding consumables for hard-facing Data Limite: TC 121 pren ISO 2553:2012 Welding and allied processes Symbolic representation on drawings Welded, brazed and soldered joints (ISO/DIS 2553:2012) Data Limite: TC 121 pren ISO 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test (ISO/FDIS 4136:2012) Data Limite: TC 121 pren ISO 5817:2012 Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections (ISO/DIS 5817:2012) Data Limite: TC 121 pren ISO 5826:2012 Resistance welding equipment Transformers General specifications applicable to all transformers (ISO/DIS 5826:2012) Data Limite: TC 121 pren ISO :2012 Water-cooled secondary connection cables for resistance welding Part 3: Test requirements (ISO/FDIS :2012) Data Limite: TC 121 pren ISO 9016:2012 Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination (ISO/FDIS 9016:2012) Data Limite: TC 121 pren ISO :2012 Soft soldering fluxes Test methods Part 10: Flux efficacy test, solder spread method (ISO/FDIS :2012) Data Limite: TC 121 EN ISO 9539:2010 /pra 1:2012 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes Amendment 1 (ISO 9539:2010/DAM 1:2012) Data Limite: TC 121 pren ISO 13588:2012 Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology (ISO/FDIS 13588:2012) Data Limite: TC 121 pren ISO 14555:2012 Welding Arc stud welding of metallic materials (ISO/DIS 14555:2012) Data Limite: TC 122 pren ISO 15535:2012 General requirements for establishing anthropometric databases (ISO/FDIS 15535:2012) Data Limite: TC 123 pren ISO 19900:2012 Petroleum and natural gas industries General requirements for offshore structures (ISO/DIS 19900:2012) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

81 TC 124 pren 336:2012 Structural timber Sizes, permitted deviations Data Limite: TC 124 pren :2012 Timber structures Strength graded structural timber with rectangular cross section Part 1: General requirements Data Limite: TC 124 EN :2010 /pra 1:2012 Timber structures Strength graded structural timber with rectangular cross section Part 2: Machine grading - Additional requirements for initial type testing TC 126 pren ISO :2012 Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation (ISO/DIS :2012) Data Limite: TC 126 pren ISO :2012 Acoustics Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor (ISO/DIS :2012) Data Limite: TC 126 pren ISO :2012 Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation (ISO/DIS :2012) Data Limite: TC 127 pren :2012 Test methods for determining the contribution to the fire resistance of structural members Part 2: Vertical protective membranes Data Limite: TC 127 pren :2012 Test methods for determining the contribution to the fire resistance of structural members Part 3: applied protection to concrete members Data Limite: TC 127 pren :2012 Test methods for determining the contribution to the fire resistance of structural members Part 4: Applied passive protection to steel members Data Limite: TC 127 pren :2012 Test methods for determining the contribution to the fire resistance of structural members Part 8: Applied reactive protection to steel members Data Limite: TC 127 pren :2012 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assesmblies, including their elements of building hardware Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows Data Limite: TC 128 pren 502:2012 Roofing products from metal sheet Specification for fully supported roofing products of stainless steel sheet Data Limite: TC 128 pren 505:2012 Roofing products from metal sheet Specification for fully supported roofing products of steel sheet Data Limite: TC 128 pren 1013:2012 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings Requirements and test methods Data Limite: TC 128 pren 14783:2012 Fully supported metal sheet and strip for roofing, external cladding and internal lining Product specification and requirements Data Limite: TC 129 pren :2012 Glass in building Heat soaked thermally toughened alkaline earth silicate safety glass Part 1: Definition and description Data Limite: TC 129 pren :2012 Glass in building Heat soaked thermally toughened alkaline earth silicate safety glass Part 2: Evaluation of conformity/product standard Data Limite: TC 129 pren :2012 Glass in building Thermally toughened soda lime silicate channel shaped safety glass Part 1: Definition and description Data Limite: TC 129 pren :2012 Glass in building Thermally toughened soda lime silicate channel shaped safety glass Part 2: Evaluation of conformity/product standard Data Limite: TC 129 pren :2012 Glass in building Painted glass for internal use Part 1: Requirements Data Limite: TC 129 pren :2012 Glass in building Painted glass for internal use Part 2: Evaluation of conformity Data Limite: TC 130 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

82 EN :2008 /pra 1:2012 Water based surface embedded heating and cooling systems Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods Data Limite: TC 130 pren :2012 Fan assisted radiators, convectors and trench convectors Part 1: Technical specifications and requirements Data Limite: TC 130 pren :2012 Fan assisted radiators, convectors and trench convectors Part 2: Test method and rating for thermal output Data Limite: TC 130 pren :2012 Fan assisted radiators, convectors and trench convectors Part 3: Test method and rating for cooling capacity Data Limite: TC 131 pren 676:2012 Forced draught burners for gaseous fuels Data Limite: TC 133 prcen/ts 13388:2012 Copper and copper alloys Compendium of compositions and products Data Limite: TC 133 pren 1977:2012 Copper and copper alloys Copper drawing stock (wire rod) Data Limite: TC 133 pren 12420:2012 Copper and copper alloys Forgings Data Limite: TC 133 pren 12450:2012 Copper and copper alloys Seamless, round copper capillary tubes Data Limite: TC 133 pren 15616:2012 Copper and copper alloys Determination of cadmium content Flame atomic absorption spectrometric method (FAAS) Data Limite: Textile floor coverings Classification of machine-made pile rugs and runners Data Limite: TC 134 EN ISO 24342:2012 /pra 1:2012 Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles Amendment 1 (ISO 24342:2007/FDAM 1:2012) Data Limite: TC 136 prcen/tr 16467:2012 Playground equipment accessible for all children Data Limite: TC 136 pren :2012 Swimming pool equipment Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment Data Limite: TC 136 pren :2012 Swimming pool equipment Part 11: Additional specific safety requirements and test methods for movable pool floors and movable bulkheads Data Limite: TC 136 EN :2009+A1:2012 /pra 2:2012 Floating leisure articles for use on and in the water Part 2: Consumer information Data Limite: TC 137 pren 13936:2012 Workplace exposure Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour Requirements and test methods Data Limite: TC 137 pren ISO 13137:2012 Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods (ISO/DIS 13137:2012) Data Limite: TC 137 pren ISO 13137:2012 Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods (ISO/DIS 13137:2012) Data Limite: TC 133 pren :2012 Copper and copper alloys Determination of copper content Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 % Data Limite: TC 134 pren 1307:2012 Textile floor coverings Classification Data Limite: TC 134 pren 14215:2012 TC 138 pren :2012 Non Destructive Testing Characterisation and verification of ultrasonic phased array systems Part 2: Probes Data Limite: TC 138 pren :2012 Non-destructive testing Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 1: Tangential radiographic inspection Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

83 TC 138 pren :2012 Non-destructive testing Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Part 2: Tangential radiographic inspection Data Limite: TC 138 pren ISO 2400:2012 Non-destructive testing Ultrasonic testing Specification for calibration block No. 1 (ISO/FDIS 2400:2012) Data Limite: TC 138 pren ISO :2012 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials (ISO/DIS :2012) Data Limite: TC 138 pren ISO :2012 Non-destructive testing Penetrant testing Part 3: reference test blocks (ISO/DIS :2012) Data Limite: TC 138 pren ISO 16946:2012 Non-destructive testing Ultrasonic testing Specification for step wedge calibration block (ISO/DIS 16946:2012) Data Limite: TC 139 pren 16402:2012 Paint and varnishes Assessment of emissions of substances from coatings into indoor air Sampling, conditioning and testing Data Limite: TC 139 pren ISO :2012 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Determination by measurement of the dry-film density (ISO/DIS :2012) Data Limite: TC 139 pren ISO :2012 Paints and varnishes Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO/FDIS :2012) Data Limite: TC 139 pren ISO 15091:2012 Paints and varnishes Determination of electrical conductivity and resistance (ISO/FDIS 15091:2012) Data Limite: TC 139 pren ISO 15091:2012 Paints and varnishes Determination of electrical conductivity and resistivity (ISO/FDIS 15091:2012) Data Limite: TC 139 pren ISO 15110:2012 Paints and varnishes Artificial weathering including acidic deposition (ISO/FDIS 15110:2012) Data Limite: TC 139 pren ISO 15184:2012 Paints and varnishes Determination of film hardness by pencil test (ISO/FDIS 15184:2012) Data Limite: TC 139 pren ISO 16925:2012 Paints and varnishes Determination of the resistance of coatings to high-pressure water-jetting (ISO/DIS 16925:2012) Data Limite: TC 139 pren ISO 16927:2012 Paints and varnishes Determination of the overcoatability and recoatability of a coating (ISO/DIS 16927:2012) Data Limite: TC 140 pren ISO 15189:2012 Medical laboratories Requirements for quality and competence (ISO/FDIS 15189:2012) Data Limite: TC 142 pren 691-1:2012 Woodworking machines Safety - Safety of woodworking machines Part 1: Common requirements Data Limite: TC 142 pren :2012 Safety of woodworking machines Band sawing machines Part 1: Table band saws and band re-saws Data Limite: TC 142 pren :2012 Safety of woodworking machines Band sawing machines Part 2: Log sawing machines Data Limite: TC 142 pren :2012 Safety of woodworking machines Circular sawing machines Part 3:Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches Data Limite: TC 142 pren 12750:2012 Safety of woodworking machines Four sided moulding machines Data Limite: TC 144 EN 15503:2009 /pra 1:2012 Garden equipment Garden blowers, vacuums and blower/vacuums Safety Data Limite: TC 144 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

84 pren 16246:2012 Agricultural machinery Backhoes Safety Data Limite: TC 144 EN ISO 10517:2009 /pra 1:2012 Powered hand-held hedge trimmers Safety (ISO 10519:2009/DAM 1:2012) Data Limite: TC 145 pren 289:2012 Plastics and rubber machines Compression moulding machines and transfer moulding machines Safety requirements Data Limite: TC 145 pren 16474:2012 Plastics and rubber machines Tyre curing presses Safety requirements Data Limite: TC 150 pren :2012 Rough-terrain trucks Safety requirements and verification Part 3: Additional requirements for variable reach trucks fitted with elevating work platform Data Limite: TC 150 EN 1755-:2000+A1:2009 /pra 2:2012 Safety of industrial trucks Operation in potentially explosive atmospheres Use in flammable gas, vapour, mist and dust Data Limite: TC 150 pren :2012 Industrial trucks Safety requirements and verification Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks Data Limite: TC 150 pren :2012 Industrial trucks Safety requirements and verification Part 5: Supplementary requirements for pedestrianpropelled trucks Data Limite: TC 151 EN 474-1:2006+A1:2009 /pra 3:2012 Earth-moving machinery Safety Part 1: General requirements Data Limite: TC 151 pren ISO 6165:2012 Earth-moving machinery Basic types Identification and terms and definitions (ISO/FDIS 6165:2012) Data Limite: TC 153 pren :2012 Food processing machinery Basic concepts Part 1: Safety requirements Data Limite: TC 153 pren 1674:2012 Food processing machinery Dough sheeters Safety and hygiene requirements Data Limite: TC 153 pren 12043:2012 Food processing machinery Intermediate provers Safety and hygiene requirements Data Limite: TC 153 pren 12268:2012 Food processing machinery Band saw machines Safety and hygiene requirements Data Limite: TC 153 pren 12463:2012 Food processing machinery Filling machines and auxiliary machines Safety and hygiene requirements Data Limite: TC 153 EN 13289:2001 /pra 1:2012 Pasta processing plants Dryers and coolers Safety and hygiene requirements Data Limite: TC 153 EN 13378:2001 /pra 1:2012 Pasta processing plants Pasta presses Safety and hygiene requirements Data Limite: TC 153 EN 13379:2001 /pra 1:2012 Pasta processing plants Spreader, stripping and cutting machine, stick return conveyor, stick magazine Safety and hygiene requirements Data Limite: TC 153 pren 13871:2012 Food processing machinery Cubes cutting machinery Safety and hygiene requirements Data Limite: TC 153 pren 15165:2012 Food processing machinery Forming machines Safety and hygiene requirements Data Limite: TC 154 EN :2009 /pra 1:2012 Tests for chemical properties of aggregates Part 1: Chemical analysis Data Limite: TC 154 pren 13055:2012 Lightweight aggregates for concrete, mortar, grout, bituminous mixtures, surface treatments and for unbound and bound applications Data Limite: TC 154 pren 13450:2012 Aggregates for railway ballast Data Limite: TC 154 pren 16236:2012 Evaluation of Conformity (EoC) of Aggregates Factory Production Control Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

85 Data Limite: TC 155 prcen ISO/TR 27165:2012 Thermoplastics piping systems Guidance for definitions of wall constructions for pipes (ISO/DTR 27165:2012) TC 155 prcen/ts :2012 Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 7: Guidance for the assessment of conformity Data Limite: TC 155 prcen/ts 14541:2012 Plastics pipes and fittings Characteristics for utilisation of non-virgin PVC-U, PP and PE materials Complementary element Data Limite: TC 155 EN :2010 /pra 1:2012 Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 3: Fittings Data Limite: TC 155 EN :2011 /pra 1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 2: Pipes Data Limite: TC 155 EN :2011 /pra 1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 3: Fittings Data Limite: TC 155 pren 15383:2012 Plastics piping systems for drainage and sewerage Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) Manholes and inspection chambers Data Limite: TC 155 pren ISO 9080:2012 Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO/FDIS 9080:2012) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 7: Lining with spirally-wound pipes (ISO :2011) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 1: General (ISO/DIS :2012) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 3: Lining with close-fit pipes (ISO/DIS :2012) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for renovation of underground gas supply networks Part 1: General (ISO :2011) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for renovation of underground gas supply networks Part 3: Lining with close-fit pipes (ISO :2011) Data Limite: TC 155 pren ISO :2012 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 1: General (ISO/FDIS :2012) Data Limite: TC 156 pren 13142:2012 Ventilation for buildings Components/products for residential ventilation Required and optional performance characteristics Data Limite: TC 156 pren 16445:2012 Ventilation for buildings Air diffusion Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet Data Limite: TC 158 pren 1080:2012 Impact protection helmets for young children Data Limite: TC 158 pren 16471:2012 Firefighters helmets Helmets for wildland fire fighting Data Limite: TC 158 pren 16473:2012 Firefighters helmets Helmets for technical rescue Data Limite: TC 161 prcen ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/DTR 18690:2012) Data Limite: TC 161 pren ISO 13287:2012 Personal protective equipment Footwear Test method for slip resistance (ISO/FDIS 13287:2012) Data Limite: TC 161 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

86 pren ISO 17249:2012 Safety footwear with resistance to chain saw cutting (ISO/DIS 17249:2012) Data Limite: TC 161 pren ISO 20346:2012 Personal protective equipment Protective footwear (ISO/DIS 20346:2012) Data Limite: TC 162 pren 374-4:2012 Protective gloves against chemicals and micro-organisms Part 4: Determination of resistance to degradation by chemicals Data Limite: TC 162 pren :2012 Motorcyclists' protective clothing against mechanical impact Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods Data Limite: TC 162 pren :2012 Motorcyclists' protective clothing against mechanical impact Part 2: Motorcyclists' back protectors - Requirements and test methods Data Limite: TC 162 pren :2012 Motorcyclists' protective clothing against mechanical impact Part 4: Motorcyclists' inflatable protectors - Requirements and test methods Data Limite: TC 162 pren :2012 Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn Data Limite: TC 162 pren :2012 Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held Data Limite: TC 162 pren :2012 Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn Data Limite: TC 162 pren 13594:2012 Protective gloves for professional motorcycle riders Requirements and test methods Data Limite: TC 162 pren :2012 Protective Clothing Body Armour Part 1: General requirements Data Limite: TC 162 pren :2012 Protective Clothing Body Armour Part 2: Bullet resistance, requirements and test methods Data Limite: TC 162 pren :2012 Protective Clothing Body Armour Part 3: Knife and Spike Resistance, Requirements and test methods Data Limite: TC 162 pren ISO :2012 Immersion suits Part 1: Constant wear suits, requirements including safety (ISO/FDIS :2012) Data Limite: TC 162 pren ISO :2012 Immersion suits Part 2: Abandonment suits, requirements including safety (ISO/FDIS :2012) Data Limite: TC 162 pren ISO :2012 Immersion suits Part 3: Test methods (ISO/FDIS :2012) Data Limite: TC 163 pren 35:2012 Pedestal and wall-hung bidets with over-rim supply Connecting dimensions Data Limite: TC 164 pren 896:2012 Chemicals used for treatment of water intended for human consumption Sodium hydroxide Data Limite: TC 164 pren 897:2012 Chemicals used for treatment of water intended for human consumption Sodium carbonate Data Limite: TC 164 pren 898:2012 Chemicals used for treatment of water intended for human consumption Sodium hydrogen carbonate Data Limite: TC 164 pren 1421:2012 Chemicals used for treatment of water intended for human consumption Ammonium chloride Data Limite: TC 164 pren 12120:2012 Chemicals used for treatment of water intended for human consumption Sodium hydrogen sulfite Data Limite: TC 164 pren 12121:2012 Chemicals used for treatment of water intended for human consumption Sodium disulfite Data Limite: TC 164 pren 12123:2012 Chemicals used for treatment of water intended for Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

87 human consumption Ammonium sulfate Data Limite: TC 164 pren 12124:2012 Chemicals used for treatment of water intended for human consumption - Sodium sulfite Data Limite: TC 164 pren 12125:2012 Chemicals used for treatment of water intended for human consumption Sodium thiosulfate Data Limite: TC 164 pren 12126:2012 Chemicals used for treatment of water intended for human consumption Liquefied ammonia Data Limite: TC 164 pren 12173:2012 Chemicals used for treatment of water intended for human consumption Sodium fluoride Data Limite: TC 164 pren 12386:2012 Chemicals used for treatment of water intended for human consumption Copper sulfate Data Limite: TC 164 pren :2012 Influence of materials on water intended for human consumption Influence due to migration Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials Data Limite: TC 164 pren 12905:2012 Products used for treatment of water intended for human consumption Expanded aluminosilicate Data Limite: TC 164 pren 12906:2012 Products used for treatment of water intended for human consumption Pumice Data Limite: TC 164 pren 12909:2012 Products used for treatment of water intended for human consumption Anthracite Data Limite: TC 164 pren 12910:2012 Products used for treatment of water intended for human consumption Garnet Data Limite: TC 164 pren 12912:2012 Products used for treatment of water intended for human consumption Barite Data Limite: TC 164 pren 12913:2012 Products used for treatment of water intended for human consumption Powdered diatomaceous earth Data Limite: TC 164 pren 12914:2012 Products used treatment of water intended for human consumption Powdered perlite Data Limite: TC 164 pren 15028:2012 Chemicals used for treatment of water intended for human consumption Sodium chlorate Data Limite: TC 164 pren 15029:2012 Products used for treatment of water intended for human consumption Iron (III) hydroxide oxide Data Limite: TC 164 pren 15030:2012 Chemicals used for treatment of water intended for human consumption Silver salts for intermittent use Data Limite: TC 164 pren 15091:2012 Sanitary tapware Electronic opening and closing sanitary tapware Data Limite: TC 164 pren 15482:2012 Chemicals used for treatment of water intended for human consumption Sodium permanganate Data Limite: TC 164 pren 15768:2012 GC-MS identification of water leachable organic substances from materials in contact with water intended for human consumption Data Limite: TC 164 pren 16070:2012 Products used for treatment of water intended for human consumption Natural Zeolite Data Limite: TC 164 pren 16145:2012 Sanitary tapware Extractable outlets for sink and basin mixers General technical specification Data Limite: TC 164 pren 16146:2012 Sanitary tapware Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 General technical specification Data Limite: TC 164 pren 16399:2012 Chemicals used for treatment of swimming pool water Sodium thiosulfate Data Limite: TC 164 pren 16400:2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

88 Chemicals used for treatment of swimming pool - Hydrogen peroxide Data Limite: TC 164 pren 16401:2012 Chemicals used for treatment of swimming pool water Sodium chloride used for electrochlorinator systems Data Limite: TC 164 pren 16409:2012 Chemicals used for treatment of water for human consumption Dolomitic lime Data Limite: TC 164 pren 16421:2012 Influence of materials on water for human consumption Enhancement of microbial growth (EMG) Data Limite: TC 165 pren 295-1:2012 Vitrified clay pipe systems for drains and sewers Part 1: Requirements for pipes, fittings and joints Data Limite: TC 165 pren 295-2:2012 Vitrified clay pipe systems for drains and sewers Part 2: Evaluation of conformity and sampling Data Limite: TC 165 pren 295-4:2012 Vitrified clay pipe systems for drains and sewers Part 4: Requirements for adaptors, connectors and flexible couplings Data Limite: TC 165 pren 295-5:2012 Vitrified clay pipe systems for drains and sewers Part 5: Requirements for perforated pipes and fittings Data Limite: TC 165 pren 295-6:2012 Vitrified clay pipes systems for drain and sewers Part 6: Requirements for components of manholes and inspection chambers Data Limite: TC 165 pren 295-7:2012 Vitrified clay pipe systems for drains and sewers Part 7: Requirements for pipes and joints for pipe jacking Data Limite: TC 165 pren :2012 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 2: System S - Dimensions Data Limite: TC 165 pren :2012 Small wastewater treatment systems for up to 50 PT Part 6: Prefabricated treatment units for septic tank effluent Data Limite: TC 165 pren :2012 Management and control of operational activities in drain and sewer systems outside buildings Part 1: Cleaning Data Limite: TC 165 pren :2012 Management and control of cleaning operations in drains and sewers Part 2: Rehabilitation Data Limite: TC 165 pren :2012 Flexible couplings Part 1: Performance requirements Data Limite: TC 165 pren :2012 Flexible couplings Part 2: Materials and dimensions for metal banded flexible couplings Data Limite: TC 166 EN 1859:2009 /pra 1:2012 Chimneys Metal chimneys Test methods Data Limite: TC 166 pren :2012 Chimneys Accessories Part 7: Rain caps - Requirements and test methods Data Limite: TC 168 pren ISO 16841:2012 Steel wire ropes Pulling eyes for rope installation Types and minimum requirements (ISO/DIS 16841:2012) Data Limite: TC 169 pren 16237:2012 Classification of non-electrical sources of incoherent optical radiation Data Limite: TC 169 pren 16268:2012 Perfomance of reflecting surfaces for luminaires Data Limite: TC 169 pren 16276:2012 Evacuation Lighting in Road Tunnels Data Limite: TC 170 pren ISO :2012 Ophthalmic optics Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods (ISO/DIS :2012) Data Limite: TC 170 pren ISO 9394:2012 Ophthalmic optics Contact lenses and contact lens care products Determination of biocompatibility by ocular study with rabbit eyes (ISO/FDIS 9394:2012) Data Limite: TC 170 pren ISO :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

89 Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 2: Commercial information (ISO/FDIS :2012) Data Limite: TC 170 pren ISO :2012 Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 3: Technical information (ISO/FDIS :2012) Data Limite: TC 170 pren ISO :2012 Ophthalmic implants Intraocular lenses Part 1: Vocabulary (ISO/FDIS :2012) Data Limite: TC 170 pren ISO :2012 Ophthalmic implants Intraocular lenses Part 2: Optical properties and test methods (ISO/DIS :2012) Data Limite: TC 170 EN ISO :2008 /pra 1:2012 Ophthalmic implants Intraocular lenses Part 4: Labelling and information - Amendment 1 (ISO :2008/FDAM 1:2012) Data Limite: TC 170 pren ISO :2012 Ophthalmic implants Intraocular lenses Part 7: Clinical investigations (ISO/DIS :2012) Data Limite: TC 170 pren ISO 11980:2012 Ophthalmic optics Contact lenses and contact lens care products Guidance for clinical investigations (ISO/FDIS 11980:2012) Data Limite: TC 170 pren ISO 13666:2012 Ophthalmic optics Spectacle lenses Vocabulary (ISO/FDIS 13666:2012) Data Limite: TC 170 pren ISO :2012 Ophthalmic optics Contact lenses Part 2: Tolerances (ISO/FDIS :2012) Data Limite: TC 172 pren 643:2012 Paper and board European list of standard grades of paper and board for recycling Data Limite: TC 172 pren 16418:2012 Paper and board Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2) Data Limite: TC 172 pren 16453:2012 Pulp, paper and paperboard Determination of phthalates in extracts from paper and paperboard Data Limite: TC 172 pren ISO 5270:2012 Pulps Laboratory sheets Determination of physical properties (ISO/FDIS 5270:2012) Data Limite: TC 175 pren 14076:2012 Timber stairs Terminology Data Limite: TC 175 pren 16449:2012 Wood and wood-based products Calculation of sequestration of atmospheric carbon dioxide Data Limite: TC 175 pren 16481:2012 Timber stairs Structural design Calculation method Data Limite: TC 178 pren 1341:2012 Slabs of natural stone for external paving Requirements and test methods Data Limite: TC 178 pren 1342:2012 Setts of natural stone for external paving Requirements and test methods Data Limite: TC 178 pren 1343:2012 Kerbs of natural stone for external paving Requirements and test methods Data Limite: TC 181 EN 1949:2011 /pra 1:2012 Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles Data Limite: TC 181 pren 16436:2012 Rubber and plastic hoses and tubings for use with propane, butane and their mixtures in the vapour phase Data Limite: TC 183 pren 840-1:2012 Mobile waste and recycling containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design Data Limite: TC 183 pren 840-2:2012 Mobile waste and recycling containers Part 2: Containers with 4 wheels with a capacity up to l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

90 TC 183 pren 840-3:2012 Mobile waste and recycling containers Part 3: Containers with 4 wheels with a capacity up to l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design Data Limite: TC 183 pren 840-4:2012 Mobile waste and recycling containers Part 4: Containers with 4 wheels with a capacity up to l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design Data Limite: TC 183 pren 840-5:2012 Mobile waste and recycling containers Part 5: Performance requirements and test methods Data Limite: TC 183 pren 840-6:2012 Mobile waste and recycling containers Part 6: Safety and health requirements Data Limite: TC 183 pren 16403:2012 Waste management Waste visual elements Data Limite: TC 185 pren ISO 4032:2012 Hexagon nuts, style 1 Product grades A and B (ISO/FDIS 4032:2012) Data Limite: TC 185 pren ISO 4033:2012 Hexagon nuts, style 2 Product grades A and B (ISO/FDIS 4033:2012) Data Limite: TC 185 pren ISO 4034:2012 Hexagon nuts Product grade C (ISO/FDIS 4034:2012) Data Limite: TC 185 pren ISO 4035:2012 Hexagon thin nuts (chamfered) Product grades A and B (ISO/FDIS 4035:2012) Data Limite: TC 185 pren ISO 4036:2012 Hexagon thin nuts (unchamfered) Product grade B (ISO/FDIS 4036:2012) Data Limite: TC 185 pren ISO 7040:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 Property classes 5, 8 and 10 (ISO/FDIS 7040:2012) Data Limite: TC 185 pren ISO 7042:2012 Prevailing torque type all-metal hexagon nuts, style 2 Property classes 5, 8, 10 and 12 (ISO/FDIS 7042:2012) Data Limite: TC 185 pren ISO 7719:2012 Prevailing torque type all-metal hexagon nuts, style 1 Property classes 5, 8 and 10 (ISO/FDIS 7719:2012) Data Limite: TC 185 pren ISO 8673:2012 Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B (ISO/FDIS 8673:2012) Data Limite: TC 185 pren ISO 8674:2012 Hexagon nuts, style 2, with metric fine pitch thread Product grades A and B (ISO/FDIS 8674:2012) Data Limite: TC 185 pren ISO 8675:2012 Hexagon thin nuts (chamfered) with metric fine pitch thread Product grades A and B (ISO/FDIS 8675:2012) Data Limite: TC 185 pren ISO 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO/FDIS 10511:2012) Data Limite: TC 185 pren ISO 10512:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread Property classes 6, 8 and 10 (ISO/FDIS 10512:2012) Data Limite: TC 185 pren ISO 10513:2012 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread Property classes 8, 10 and 12 (ISO/FDIS 10513:2012) Data Limite: TC 185 EN ISO 16047:2005 /pra 1:2012 Fasteners Torque/clamp force testing (ISO 16047:2005/FDAmd 1:2012) Data Limite: TC 188 pren :2012 Conveyor belts Fire simulation flammability testing Part 1: Propane burner tests Data Limite: TC 188 pren ISO 284:2012 Conveyor belts Electrical conductivity Specification and test method (ISO/FDIS 284:2012) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

91 TC 188 pren ISO 1120:2012 Conveyor belts Determination of strength of mechanical fastenings Static test method (ISO/FDIS 1120:2012) Data Limite: TC 188 pren ISO 15147:2012 Light conveyor belts Tolerances on widths and lengths of cut light conveyor belts (ISO/FDIS 15147:2012) Data Limite: TC 189 pren 14574:2012 Geosynthetics Determination of the pyramid puncture resistance of supported geosynthetics Data Limite: TC 189 pren 16416:2012 Geosynthetic clay barriers Determination of water flux index Flexible wall permeameter method at constant head Data Limite: TC 192 EN :2009 /pra 1:2012 Firefighting and rescue service vehicles Part 2: Common requirements - Safety and performance Data Limite: TC 193 pren 828:2012 Adhesives Wettability Determination by measurement of contact angle and surface free energy of solid surface Data Limite: TC 193 pren 1242:2012 Adhesives Determination of isocyanate content Data Limite: TC 193 pren :2012 Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 2: Determination of volatile organic compounds Data Limite: TC 193 pren :2012 Adhesives Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application Part 1: General procedure Data Limite: TC 195 pren ISO :2012 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 1: Gas-phase air cleaning media (ISO/DIS :2012) Data Limite: TC 197 pren 16480:2012 Pumps Minimum required efficiency of rotodynamic water pumps Data Limite: TC 203 prcen/tr 16470:2012 Environmental aspects of ductile iron pipe systems for water and sewerage aspects applications Data Limite: TC 204 EN ISO :2006 /pra 1:2012 Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO :2006/Amd.1:2012) Data Limite: TC 204 EN ISO :2011 /pra 1:2012 Aseptic processing of health care products Part 6: Isolator systems (ISO :2005/DAM 1:2012) Data Limite: TC 205 pren 14683:2012 Medical face masks Requirements and test methods Data Limite: TC 205 pren ISO 4074:2012 Natural latex rubber condoms Requirements and test methods (ISO/DIS 4074:2012) Data Limite: TC 205 pren ISO :2012 Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers (ISO/FDIS :2012) Data Limite: TC 205 pren ISO :2012 Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions (ISO/FDIS :2012) Data Limite: TC 205 pren ISO :2012 Medical electrical equipment Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO :2009) Data Limite: TC 207 EN 716-1:2008 /pra 1:2012 Furniture Children's cots and folding cots for domestic use Part 1: Safety requirements Data Limite: TC 207 EN 716-2:2008 /pra 1:2012 Furniture Children's cots and folding cots for domestic use Part 2: Test methods Data Limite: TC 207 pren :2012 Furniture Chairs and tables for educational institutions Part 1: Functional dimensions Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

92 TC 211 pren ISO 11200:2012 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO/DIS 11200:2012) Data Limite: TC 212 pren :2012 Pyrotechnic articles Theatrical pyrotechnic articles Part 3: Requirements for construction and performance Data Limite: TC 212 pren :2012 Pyrotechnic articles Theatrical pyrotechnic articles Part 4: Minimum labelling requirements and instructions for use Data Limite: TC 212 pren :2012 Pyrotechnic articles Theatrical pyrotechnic articles Part 5: Test methods Data Limite: TC 212 pren :2012 Pyrotechnic articles Fireworks, Category 4 Part 2: Requirements Data Limite: TC 212 pren :2012 Pyrotechnic articles Other pyrotechnic articles Part 1: Terminology Data Limite: TC 212 pren :2012 Pyrotechnic articles Other pyrotechnic articles Part 2: Requirements Data Limite: TC 212 pren :2012 Pyrotechnic articles Other pyrotechnic articles Part 3: Categories and types Data Limite: TC 212 pren :2012 Pyrotechnic articles Other pyrotechnic articles Part 4: Test methods Data Limite: TC 212 pren :2012 Pyrotechnic articles Other pyrotechnic articles Part 5: Minimum labelling requirements and instructions for use Data Limite: TC 215 pren ISO :2012 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets (ISO/DIS :2012) Data Limite: TC 215 pren ISO :2012 Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors (ISO/FDIS :2012) Data Limite: TC 215 pren ISO 5361:2012 Anaesthetic and respiratory equipment Tracheal tubes and connectors (ISO/FDIS 5361:2012) Data Limite: TC 215 pren ISO :2012 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO/DIS :2012) Data Limite: TC 215 pren ISO 11197:2012 Medical supply units (ISO/DIS 11197:2012) Data Limite: TC 215 pren ISO :2012 Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO :2011) Data Limite: TC 216 pren 13697:2012 Chemical disinfectants and antiseptics Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas Test method and requirements without mechanical action (phase 2, step 2) Data Limite: TC 216 pren 14204:2012 Chemical disinfectants and antiseptics Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) Data Limite: TC 216 pren 14349:2012 Chemical disinfectants and antiseptics Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2) Data Limite: TC 216 pren 16437:2012 Chemical disinfectants and antiseptics Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action Test method and requirements (phase 2, step2) Data Limite: TC 216 pren 16438:2012 Chemical disinfectants and antiseptics Quantitative Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

93 surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfec -tants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - (phase 2, step 2) Data Limite: TC 218 pren 13482:2012 Rubber hoses and hose assemblies for asphalt and bitumen Specification Data Limite: TC 218 pren ISO 6808:2012 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids Specification (ISO/DIS 6808:2012) Data Limite: TC 219 pren 12473:2012 General principles of cathodic protection in seawater Data Limite: TC 224 prcen/ts :2012 Identification card systems European Citizen Card Part 1: Physical, electrical and transport protocol characteristics Data Limite: TC 224 pren :2012 Application Interface for smart cards used as Secure Signature Creation Devices Part 1: Basic services Data Limite: TC 224 pren :2012 Application Interface for smart cards used as Secure Signature Creation Devices Part 2: Additional Services Data Limite: TC 226 pren :2012 Road restraint systems Part 4: Performance classes, impact test acceptance criteria and test methods for transitions and removable barrier sections Data Limite: TC 226 pren :2012 Road restraint systems Part 7: Performance classes, impact test acceptance criteria and test methods for terminals of safety barriers Data Limite: TC 226 pren :2012 Road traffic noise reducing devices Test method for determining the acoustic performance Part 1: Intrinsic characteristics of sound absorption Data Limite: TC 226 pren :2012 Road traffic noise reducing devices Test method for determining the acoustic performance Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions Data Limite: TC 226 pren :2012 Road traffic noise reducing devices Test method for determining the acoustic performance Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions Data Limite: TC 227 pren :2012 Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of foreign matter in reclaimed asphalt Data Limite: TC 227 pren :2012 Concrete pavements Part 1: Materials Data Limite: TC 227 pren :2012 Concrete pavements Part 2: Functional requirements for concrete pavements Data Limite: TC 228 pren 12828:2012 Heating systems in buildings Design for water-based heating systems Data Limite: TC 230 pren 16164:2012 Water quality Guidance standard for designing and selecting taxonomic keys Data Limite: TC 230 pren 16260:2012 Water quality Visual seabed surveys using remotely operated and/or towed observation gear for collection of environmental data Data Limite: TC 230 pren :2012 Water quality Performance requirements and conformity test procedures for water monitoring equipment Part 1: Automated sampling devices (samplers) for water and waste water Data Limite: TC 230 pren ISO :2012 Water quality Sampling Part 3: Preservation and handling of water samples (ISO/FDIS :2012) Data Limite: TC 230 pren ISO 6341:2012 Water quality Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) Acute toxicity test (ISO/FDIS 6341:2012) Data Limite: TC 230 pren ISO 7827:2012 Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

94 TC 230 pren ISO 11206:2012 Water quality Determination of dissolved bromate Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011) Data Limite: TC 231 pren 12786:2012 Safety of machinery Rules for the drafting of the vibration clauses of safety standards Data Limite: TC 231 pren ISO :2012 Hand-held portable power tools Test methods for evaluation of vibration emission Part 12: Die grinders (ISO/FDIS :2012) Data Limite: TC 234 pren 12583:2012 Gas infrastructure Compressor stations Functional requirements Data Limite: TC 239 pren :2012 Medical vehicles and their equipment Air ambulances Part 2: Operational and technical requirements of air ambulances Data Limite: TC 240 prcen/tr :2012 Thermal spraying Safety requirements for thermal spraying equipment Part 6: Spray cabin, Handling system, Dust collection, Exhausting system, Filter Data Limite: TC 240 pren :2012 Thermal spraying Safety requirements for thermal spraying equipment Part 1: General requirements Data Limite: TC 240 pren :2012 Thermal spraying Safety requirements for thermal spraying equipment Part 3: Torches for thermal spraying and their connection and supply units Data Limite: TC 240 pren :2012 Thermal spraying Safety requirements for thermal spraying equipment Part 4: Gas and liquid fuel supply Data Limite: TC 240 pren :2012 Thermal spraying Safety requirements for thermal spraying equipment Part 5: Powder and wire feed units Data Limite: TC 240 pren ISO 14920:2012 Thermal spraying Spraying and fusing of self-fluxing alloys (ISO/DIS 14920:2012) Data Limite: TC 242 pren 12397:2012 Safety requirements for cableway installations designed to carry persons - Operation Operation Data Limite: TC 242 pren :2012 Safety requirements for cableway installations to carry personnes Carriers Part 1: Grips, carriers trucks, onboard brakes,cabins,chairs, carriages,maintenance carriers,tow-hangers Data Limite: TC 242 pren :2012 Safety requirements for cableway installations designed to carry persons Carriers Part 2: Slipping resistance tests for grips Data Limite: TC 242 pren :2012 Safety requirements for cableway installations designed to carry persons Carriers Part 3: Fatigue tests Data Limite: TC 246 pren :2012 Agglomerated stone Test methods Part 1: Determination of apparent density and water absorption Data Limite: TC 246 pren :2012 Agglomerated stone Test methods Part 13: Determination of electrical resistivity Data Limite: TC 246 pren 16306:2012 Natural stone test methods Determination of resistance of marble to thermal and moisture cycles Data Limite: TC 247 pren :2012 Open Data Communication in Building Automation, Controls and Building Management Home and Building Electronic Systems Part 2: KNXnet/IP Communication Data Limite: TC 248 prcen/tr 16446:2012 Textiles Safety of children's clothing Guidance on the use of EN 14682:2007 Cords and drawstrings on children's clothing - Specifications TC 248 EN 31092:1993 /pra 1:2012 Textiles Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) Amendment 1 (ISO 11092:1993/FDAM 1:2012) Data Limite: TC 248 pren ISO 105-A11:2012 Textiles Tests for colour fastness Part A11: Determination of colour fasness grades by digital imaging techniques (ISO/FDIS 105-A11:2012) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

95 TC 248 pren ISO 2076:2012 Textiles Man-made fibres Generic names (ISO/DIS 2076:2012) Data Limite: TC 248 pren ISO :2012 Textiles Dyestuffs Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic substances (ISO/DIS :2012) Data Limite: TC 248 pren ISO 20743:2012 Textiles Determination of antibacterial activity of textile products (ISO/DIS 20743:2012) Data Limite: TC 249 prcen/ts 16010:2012 Plastics Recycled plastics Sampling procedures for testing plastics waste and recyclates Data Limite: TC 249 prcen/ts 16011:2012 Plastics Recycled plastics Sample preparation Data Limite: TC 249 EN 438-9:2010 /pra 1:2012 High-pressure decorative laminates (HPL) Sheets based on thermosetting resins (usually called laminates) Part 9 : Classification and specifications for alternative core laminates Data Limite: TC 249 pren :2012 Testing of welded joints in thermoplastics semi-finished products Part 3: Tensile creep test Data Limite: TC 249 pren 13067:2012 Plastics welding personnel Qualification testing of welders Thermoplastics welded assemblies Data Limite: TC 249 pren :2012 Non destructive testing of welded joints of thermoplastics semi-finished products Part 4: High voltage testing Data Limite: TC 249 pren :2012 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 1: Test methods for characterisation of compounds and products Data Limite: TC 249 pren :2012 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 4: Specifications for decking profiles and tiles Data Limite: TC 249 pren :2012 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Part 5: Specifications for cladding profiles and tiles Data Limite: TC 249 pren 16296:2012 Imperfections in thermoplastics welded joints Quality levels Data Limite: TC 249 pren 16465:2012 Plastics Calibration method of black-standard and white-standard thermometers and black-panel and whitepanel thermometers for use in natural and artificial weathering Data Limite: TC 249 pren 16472:2012 Plastics Method for accelerated photoageing using medium pressure mercury vapour lamps Data Limite: TC 249 pren ISO 294-5:2012 Plastics Injection moulding of test specimens of thermoplastic materials Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011) Data Limite: TC 249 pren ISO :2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (ISO/FDIS :2012) Data Limite: TC 249 pren ISO 3385:2012 Flexible cellular polymeric materials Determination of fatigue by constant-load pounding (ISO/DIS 3385:2012) Data Limite: TC 249 pren ISO :2012 Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test (ISO/FDIS :2012) Data Limite: TC 249 pren ISO 5999:2012 Flexible cellular polymeric materials Polyurethane foam for load-bearing applications excluding carpet underlay Specification (ISO/DIS 5999:2012) Data Limite: TC 249 pren ISO :2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications (ISO/FDIS :2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

96 Data Limite: TC 249 pren ISO :2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties (ISO/FDIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO :2011) Data Limite: TC 249 pren ISO :2012 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity (ISO :2005) Data Limite: TC 249 pren ISO :2012 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO :2008) Data Limite: TC 249 pren ISO :2012 Plastics Differential scanning calorimetry (DSC) Part 7: Determination of crystallization kinetics (ISO :2002) Data Limite: TC 249 pren ISO :2012 Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties (ISO/FDIS :2012) Data Limite: TC 249 pren ISO 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics (ISO/FDIS 11963:2012) Data Limite: TC 249 pren ISO :2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide Part 1: General method (ISO/FDIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specification (ISO/FDIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties (ISO/FDIS :2012) Data Limite: TC 249 pren ISO 15527:2012 Plastics Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) Requirements and test methods (ISO 15527:2010) Data Limite: TC 249 pren ISO :2012 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance (ISO/DIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Polyamide (PA) moulding and extrusion materials Part 1: Designation system, marking of products and basis for specification (ISO/DIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Polyethylene (PE) moulding and extrusion materials Part 1:Designation system and basis for specifications (ISO/DIS :2012) Data Limite: TC 249 pren ISO :2012 Plastics Decorative solid surfacing materials Part 1: Classification and specifications (ISO :2008) Data Limite: TC 249 pren ISO :2012 Plastics Decorative solid surfacing materials Part 2: Determination of properties - Sheet goods (ISO :2007) Data Limite: TC 249 pren ISO :2012 Plastics Decorative solid surfacing materials Part 3: Determination of properties - Solid surface shapes (ISO :2007) Data Limite: TC 251 pren ISO 1828:2012 Health informatics Categorial structure for classifications and coding systems of surgical procedures (ISO/FDIS 1828:2012) Data Limite: TC 251 pren ISO 10781:2012 Electronic health record-system functional model (ISO/DIS 10781:2012) Data Limite: TC 251 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

97 pren ISO :2012 Health informatics Personal health device communication Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) (ISO/FDIS :2012) Data Limite: TC 251 pren ISO :2012 Health informatics Personal health device communication Part 10420: Device specialization - Body composition analyzer (ISO/FDIS :2012) Data Limite: TC 251 pren ISO :2012 Health informatics Personal health device communication Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO/FDIS :2012) Data Limite: TC 251 pren ISO :2012 Health Informatics Personal health device communication Part 10472: Device specialization - Medication monitor (ISO/FDIS :2012) Data Limite: TC 251 pren ISO :2012 Health informatics Point-of-care medical device communication Part 30400: Interface profile - Cabled Ethernet (ISO/FDIS :2012) Data Limite: TC 251 pren ISO 13119:2012 Health informatics Clinical knowledge resources Metadata (ISO/FDIS 13119:2012) Data Limite: TC 251 pren ISO 18104:2012 Health informatics Categorical structures for representation of nursing diagnoses and nursing actions in terminological systems (ISO/DIS 18104:2012) Data Limite: TC 251 pren ISO :2012 Health informatics Patient healthcard data Part 2: Common objects (ISO/DIS :2012) Data Limite: TC 251 pren ISO :2012 Health informatics Patient healthcard data Part 3: Limited clinical data (ISO/DIS :2012) Data Limite: TC 251 pren ISO :2012 Health informatics Patient healthcard data Part 4: Extended clinical data (ISO/DIS :2012) Data Limite: TC 252 pren 16120:2012 Child use and care articles Chair mounted seat Data Limite: TC 252 pren 16232:2012 Child use and care articles Infant swings Data Limite: TC 254 pren 13707:2012 Flexible sheets for waterproofing Reinforced bitumen sheets for roof waterproofing Definitions and characteristics Data Limite: TC 254 pren 13956:2012 Flexible sheet for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics Data Limite: TC 254 pren 13984:2012 Flexible sheets for waterproofing Plastic and rubber vapour control layers Definitions and characteristics Data Limite: TC 255 pren ISO :2012 Hand-held non-electric power tools Safety requirements Part 3: Drills and tappers (ISO/FDIS :2012) Data Limite: TC 255 pren ISO :2012 Hand-held non-electric power tools Safety requirements Part 4: Non-rotary percussive power tools (ISO/FDIS :2012) Data Limite: TC 255 pren ISO :2012 Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners (ISO/FDIS :2012) Data Limite: TC 256 EN :2009+A1:2010 /pra 2:2012 Railway applications Wheelsets and bogies - Powered axles Design method Data Limite: TC 256 pren :2012 Railway applications Track - Track geometry quality Part 6: Characterisation of track geometry quality Data Limite: TC 256 pren :2012 Railway applications Methods for calculation of stopping and slowing distances and immobilisation braking Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles Data Limite: TC 256 pren :2012 Railway applications Methods for calculation of stopping and slowing distances and immobilisation braking Part 2: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

98 Step by step calculations for train sets or single vehicles Data Limite: TC 256 pren :2012 Railway applications Brake discs for railway rolling stock Part 3: Brake discs, performance of the disc and the friction couple, classification Data Limite: TC 256 pren :2012 Railway applications External visible and audible warning devices for trains Part 1: Head, marker and tail lamps Data Limite: TC 256 pren :2012 Railway applications External visible and audible warning devices for trains Part 2: Warning horns Data Limite: TC 256 pren :2012 Railway applications Gauges Part 1: General - Common rules for infrastructure and rolling stock Data Limite: TC 256 pren :2012 Railway applications Gauges Part 2: Rolling stock gauge Data Limite: TC 256 pren :2012 Railway applications Gauges Part 3: Obstacle gauges Data Limite: TC 256 pren :2012 Railway applications Classification system for railway vehicles Part 4: Function groups Data Limite: TC 256 pren :2012 Railway applications Measurement of wheel and axle loads Part 1: Interoperable 'in-service' rail vehicles Data Limite: TC 256 pren :2012 Railway applications Track - Trailers and associated equipment Part 2: General safety requirements Data Limite: TC 256 pren :2012 Railway applications Track - Demountable machines and associated equipment Part 2: General safety requirements Data Limite: TC 256 pren :2012 Railway applications Driver's cab Part 3: Design of displays Data Limite: TC 256 pren :2012 Railway applications Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse sound field conditions Data Limite: TC 256 pren :2012 Railway applications Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance Part 2: Intrinsic characteristics - Airborne sound insulation in the laboratory under diffuse sound field conditions Data Limite: TC 256 pren :2012 Railway applications Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse field applications Data Limite: TC 256 pren 16404:2012 Railway Applications Re-railing and recovery requirements for railway vehicles Data Limite: TC 256 pren 16431:2012 Railway applications Track Hollow sleepers and bearers Data Limite: TC 256 pren :2012 Railway applications Ballastless track systems Part 1: General requirements Data Limite: TC 256 pren 16451:2012 Railway applications Braking Brake pad holder Data Limite: TC 256 pren 16452:2012 Railway applications Braking Brake blocks Data Limite: TC 256 pren :2012 Railway applications Fire protection on railway vehicles Part 1: General Data Limite: TC 256 pren :2012 Railway applications Fire protection on railway vehicles Part 2: Requirements for fire behavior of materials and components Data Limite: TC 256 pren :2012 Railway applications Fire protection on railway vehicles Part 3: Fire resistance requirements for fire barriers Data Limite: TC 256 pren :2012 Railway applications Fire protection on railway vehicles Part 4: Fire safety requirements for rolling stock design Data Limite: TC 256 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

99 pren :2012 Railway applications Fire protection on railway vehicles Part 6: Fire control and management systems Data Limite: TC 256 pren :2012 Railway applications Fire protection on railway vehicles Part 7: Fire safety requirements for flammable liquid and flammable gas installations Data Limite: TC 259 pren :2012 Water-tube boilers and auxiliary installations Part 7: Requirements for equipment for the boiler Data Limite: TC 260 pren 12945:2012 Liming materials Determination of neutralizing value Titrimetric methods Data Limite: TC 260 pren :2012 Fertilizers Determination of chelating agents in fertilizers by chromatography Part 1: Determination of EDTA, HEEDTA and DTPA by ion chromatography Data Limite: TC 260 pren 13971:2012 Carbonate and silicate liming materials Determination of reactivity Potentiometric titration method with hydrochloric acid Data Limite: TC 260 pren 16195:2012 Fertilizers Determination of chlorides in the absence of organic material Data Limite: TC 260 pren 16196:2012 Fertilizers Manganimetric determination of extracted calcium following precipitation in the form of oxalate Data Limite: TC 260 pren 16197:2012 Fertilizers - Determination of magnesium by atomic absorption spectrometry Data Limite: TC 260 pren 16198:2012 Fertilizers Determination of magnesium by complexometry Data Limite: TC 260 pren 16199:2012 Fertilizers Determination of the sodium extracted by flame-emission spectrometry Data Limite: TC 260 pren 16328:2012 Fertilizers Determination of 3,4-dimethyl-1H-pyrazole phosphate (DMPP) Method using high-performance liquid chromatography (HPLC) Data Limite: TC 261 pren ISO 13127:2012 Packaging Child resistant packaging Mechanical test methods for reclosable child resistant packaging systems (ISO/FDIS 13127:2012) Data Limite: TC 262 pren ISO :2012 Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO :2010) Data Limite: TC 263 EN :2009 /pra 1:2012 Secure storage units Classification and methods of test for resistance to fire Part 2: Data rooms and data container Data Limite: TC 264 prcen/ts 16429:2012 Stationary source emissions Sampling and determination of hydrogen chloride content in ducts and stacks Infrared analytical technique Data Limite: TC 264 prcen/ts 16450:2012 Ambient air Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) Data Limite: TC 264 pren 12341:2012 Ambient air Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter Data Limite: TC 264 pren 12619:2012 Stationary source emissions Determination of the mass concentration of total gaseous organic carbon Continuous flame ionisation detector method Data Limite: TC 264 pren 16413:2012 Air quality Biomonitoring with lichens Assessing epiphytic lichen diversity Data Limite: TC 264 pren 16414:2012 Air quality Biomonitoring with mosses Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples Data Limite: TC 264 pren ISO 13199:2012 Stationary source emissions Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes Non-dispersive infrared analyser equipped with catalytic converter (ISO/FDIS 13199:2012) Data Limite: TC 264 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

100 pren ISO :2012 Indoor air Part 32: Investigation of buildings for pollutants and other injurious factors - Inspections (ISO/DIS :2012) Data Limite: TC 267 pren :2012 Metallic industrial piping Part 8: Additionnal requirements for aluminium and aluminium alloy piping Data Limite: TC 269 pren :2012 Water-tube boilers and auxiliary installations Part 18: Operating instructions Data Limite: TC 271 pren 1539:2012 Dryers and ovens, in which flammable substances are released Safety requirements Data Limite: TC 274 pren :2012 Aircraft ground support equipment General requirements Part 1: Basic safety requirements Data Limite: TC 274 pren :2012 Aircraft ground support equipment Specific requirements Part 1: Passenger stairs Data Limite: TC 274 pren :2012 Aircraft ground support equipment Specific requirements Part 9: Container/Pallet loaders Data Limite: TC 275 prcen/tr 16468:2012 Food analysis Determination of pesticide residues by GC-MS Retention times and mass spectrometric parameters Data Limite: TC 275 prcen/ts :2012 Foodstuffs Detection of food allergens by immunological methods Part 2: Quantitative determination of hazelnut with an enzyme immunoassay using monoclonal antibodies and bicinchoninic acid-protein detection Data Limite: TC 275 pren 12822:2012 Foodstuffs Determination of vitamin E by high performance liquid chromatography Measurement of a-, s-, y- and õ-tocopherols Data Limite: TC 275 pren :2012 Foodstuffs Determination of vitamin A by high performance liquid chromatography Part 1: Measurement of alltrans-retinol and 13-cis-retinol Data Limite: TC 275 pren 14122:2012 Foodstuffs Determination of vitamin B1 by HPLC Data Limite: TC 275 pren 14152:2012 Foodstuffs Determination of vitamin B2 by HPLC Data Limite: TC 275 pren 14164:2012 Foodstuffs Determination of vitamin B6 by HPLC Data Limite: TC 275 pren ISO 11133:2012 Microbiology of food, animal feeding stuffs and water Preparation, production, storage and performance testing of culture media (ISO/DIS 11133:2012) Data Limite: TC 275 EN ISO 21570:2005 /pra 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods (ISO 21570:2005/DAM 1:2012) Data Limite: TC 278 prcen ISO/TS :2012 Electronic fee collection Charging performance Part 1: Metrics (ISO/DTS :2012) Data Limite: TC 278 prcen/tr 16427:2012 Intelligent transport systems Public transport Traveller Information for Visually Impaired People (TI-VIP) Data Limite: TC 278 pren 16312:2012 Intelligent transport systems Automatic Vehicle and Equipment Registration (AVI/AEI) Interoperable application profile for AVI/AEI and Electronic Register Identification using dedicated short range communication Data Limite: TC 278 pren 28701:2012 Intelligent transport systems Public transport Identification of Fixed Objects in Public Transport (IFOPT) Data Limite: TC 278 pren ISO 17261:2012 Intelligent transport systems Automatic vehicle and equipment identification Intermodal goods transport architecture and terminology (ISO/FDIS 17261:2012) Data Limite: TC 278 pren ISO 17262:2012 Intelligent transport systems Automatic vehicle and equipment identification Numbering and data structures (ISO/FDIS 17262:2012) Data Limite: TC 279 pren 16271:2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

101 Value management Functional expression of the need and functional performance specification Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product Data Limite: TC 281 pren :2012 Appliances, solid fuels and firelighters for barbecueing Part 1: Barbecues burning solid fuels - Requirements and test methods Data Limite: TC 285 pren ISO 14630:2012 Implants chirurgicaux non actifs Exigences générales (ISO/FDIS 14630:2012) Data Limite: TC 285 EN ISO 21536:2009 /pra 1:2012 Non-active surgical implants Joint replacement implants Specific requirements for knee-joint replacement implants (ISO 21536:2007/DAmd 1:2012) Data Limite: TC 285 pren ISO :2012 Cardiovascular implants Endovascular devices Part 2: Vascular stents (ISO/FDIS :2012) Data Limite: TC 286 pren 14071:2012 LPG equipment and accessories Pressure relief valves for LPG pressure vessels Ancillary equipment Data Limite: TC 286 pren 14570:2012 LPG equipment and accessories Equipping of overground and underground LPG vessels Data Limite: TC 286 pren :2012 LPG equipment and accessories Construction and performance of LPG equipment for automotive filling stations Part 3: Refuelling installations at private and industrial premises Data Limite: TC 286 pren 14894:2012 LPG equipment and accessories Cylinder and drum marking Data Limite: TC 286 pren 16119:2012 LPG equipment and accessories Sealing caps and plugs for LPG cylinder and pressure vessel valves Specification and testing Data Limite: TC 287 prcen/tr :2012 Geographic information Spatial Data Infrastructure Service centric view TC 287 pren ISO :2012 Geographic information Reference model Part 1: Fundamentals (ISO/DIS :2012) Data Limite: TC 287 pren ISO 19152:2012 Geographic information Land Administration Domain Model (LADM) (ISO/FDIS 19152:2012) Data Limite: TC 289 pren 16223:2012 Leather Requirements for the designation and description of leather in upholstery and automotive interior applications Data Limite: TC 289 pren 16419:2012 Leather Chamois leather Classification and requirements Data Limite: TC 289 pren ISO 11640:2012 Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing (ISO/FDIS 11640:2012) Data Limite: TC 289 pren ISO 11641:2012 Leather Tests for colour fastness Colour fastness to perspiration (ISO/FDIS 11641:2012) Data Limite: TC 289 pren ISO 11642:2012 Leather Tests for colour fastness Colour fastness to water (ISO/FDIS 11642:2012) Data Limite: TC 289 pren ISO 14268:2012 Leather Physical and mechanical tests Determination of water vapour permeability (ISO/FDIS 14268:2012) Data Limite: TC 289 pren ISO 17070:2012 Leather Chemical tests Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentchlorophenol content (ISO/DIS 17070:2012) Data Limite: TC 289 pren ISO :2012 Leather Determination of ethoxylated alkylphenols Part 1: Direct method (ISO/DIS :2012) Data Limite: TC 289 pren ISO :2012 Leather Determination of ethoxylated alkylphenols Part 2: Indirect method (ISO/DIS :2012) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

102 Data Limite: TC 289 pren ISO 20433:2012 Leather Tests for colour fastness Colour fastness to crocking (ISO/FDIS 20433:2012) Data Limite: TC 290 pren ISO 1101:2012 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out (ISO 1101:2012) Data Limite: TC 290 pren ISO 2692:2012 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO/DIS 2692:2012) Data Limite: TC 290 EN ISO 3040:2012 /pra 1:2012 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones - Amendment 1 (ISO 3040:2009/DAM 1:2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Surface texture: Profile method; Measurement standards Part 2: Software measurement standards (ISO/FDIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMS) Part 10: Laser trackers for measuring point-to-point distances (ISO/DIS :2012) Data Limite: TC 290 EN ISO :2010 /pra 1:2012 Geometrical product specifications (GPS) Dimensional tolerancing Part 1: Linear sizes - Amendment 1 (ISO :2010/DAM 1:2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters: Gaussian regression filters (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Filtration Part 85: Areal morphological: Segmentation (ISO/DIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO/FDIS :2012) Data Limite: TC 290 pren ISO :2012 Geometrical product specifications (GPS) Surface texture: Areal Part 71: Software measurement standards (ISO/FDIS :2012) Data Limite: TC 292 pren 16123:2012 Characterization of waste Guidance on selection and application of screening methods Data Limite: TC 292 pren 16424:2012 Characterization of waste Screening methods for the element composition by portable X-ray fluorescence intruments Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

103 TC 292 pren 16457:2012 Characterization of waste Framework for the preparation and application of a testing programme Objectives, planning and report Data Limite: TC 296 pren 12972:2012 Tanks for transport of dangerous goods Testing, inspection and marking of metallic tanks Data Limite: TC 296 EN 13083:2008 /pra 1:2012 Tanks for transport of dangerous goods Service equipment for tanks Adaptor for bottom loading and unloading Data Limite: TC 296 pren 14564:2012 Tanks for transport of dangerous goods Terminology Data Limite: TC 296 pren 15207:2012 Tanks for the transport of dangerous goods Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage Data Limite: TC 296 pren 15208:2012 Tanks for transport of dangerous goods Sealed parcel delivery systems Working principles and interface specifications Data Limite: TC 297 pren :2012 Free-standing chimneys Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners Data Limite: TC 298 pren :2012 Pigments and extenders Methods of dispersion and assessment of dispersability in plastics Part 6: Determination by film test Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 1: Terms and definitions Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 3: Test conditions Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 4: Test methods Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 5: Requirements Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 6: Calculation of seasonal performances Data Limite: TC 299 pren :2012 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kw Part 7: Specific provisions for hybrid appliances Data Limite: TC 301 pren ISO :2012 Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements (ISO/DIS :2012) Data Limite: TC 301 pren ISO :2012 Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements (ISO/DIS :2012) Data Limite: TC 301 pren ISO :2012 Road vehicles Standardized repair and maintenance information (RMI) terminology Part 1: General information and use case definition (ISO/FDIS :2012) Data Limite: TC 301 pren ISO :2012 Road vehicles Standardized repair and maintenance information (RMI) terminology Part 2: Standardized process implementation requirements, registration authority (ISO/DIS :2012) Data Limite: TC 302 pren ISO :2012 Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks (ISO/DIS :2012) Data Limite: TC 305 pren 16447:2012 Explosion isolation flap valves Data Limite: TC 305 pren ISO/IEC :2012 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirements (ISO/IEC/DIS Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

104 :2012) Data Limite: TC 305 pren ISO/IEC :2012 Explosive atmospheres Part 37: Non-electrical equipment for use in explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISOIEC/DIS :2012) Data Limite: TC 305 pren ISO/IEC :2012 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC/DIS :2012) Data Limite: TC 307 pren ISO 3657:2012 Animal and vegetable fats and oils Determination of saponification value (ISO/DIS 3657:2012) Data Limite: TC 307 pren ISO 3961:2012 Animal and vegetable fats and oils Determination of iodine value (ISO/DIS 3961:2012) Data Limite: TC 307 EN ISO :1995 /pra 1:2012 Rapeseed Determination of glucosinolates content Part 1: Method using high-performance liquid chromatography - Amendment 1 (ISO :1992/DAM 1:2012) Data Limite: TC 308 prcen/tr 16456:2012 Characterization of sludges Good practice of sludge dewatering Data Limite: TC 308 pren :2012 Characterisation of sludges Filtration properties Part 2: Determination of the specific resistance to filtration Data Limite: TC 309 pren ISO 16177:2012 Footwear Resistance to crack initiation and growth Belt flex method (ISO/FDIS 16177:2012) Data Limite: TC 312 pren ISO 9806:2012 Solar energy Solar thermal collectors Test methods (ISO/DIS 9806:2012) Data Limite: TC 315 pren :2012 Spectator facilities Part 6 : Demountable (temporary) stands Data Limite: TC 318 prcen/tr 16469:2012 Hydrometry Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements Data Limite: TC 320 pren 16258:2012 Methodology for calculation and declaration on energy consumptions and GHG emissions in transport services (good and passengers transport) Data Limite: TC 325 prcen/tr :2012 Prevention of crime Urban planning and building design Part 4: Shops and offices TC 329 pren ISO 13293:2012 Recreational diving services Requirements for gas blender training programmes (ISO/FDIS 13293:2012) Data Limite: TC 331 pren 13850:2012 Postal Services Quality of Services Measurement of the transit time of end-to-end services for single piece priority mail and first class mail Data Limite: TC 332 pren ISO 6556:2012 Laboratory glassware Filter flasks (ISO/FDIS 6556:2012) Data Limite: TC 333 EN 15918:2011 /pra 1:2012 Cycles Cycle trailers Safety requirements and test methods TC 336 pren 12597:2012 Bitumen and bituminous binders Terminology Data Limite: TC 337 pren :2012 Sweepers Part 2: Performance requirements and test methods Data Limite: TC 338 pren ISO 5527:2012 Cereals Vocabulary (ISO/DIS 5527:2012) Data Limite: TC 338 pren ISO 20483:2012 Cereals and pulses Determination of the nitrogen content and calculation of the crude protein content Kjeldahl method (ISO/DIS 20483:2012) Data Limite: TC 341 pren ISO :2012 Geotechnical investigation and testing Field testing Part 1: Electrical cone and piezocone penetration test Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

105 (ISO/FDIS :2012) Data Limite: TC 341 pren ISO :2012 Geotechnical investigation and testing Field testing Part 4: Ménard pressuremeter test (ISO/FDIS :2012) Data Limite: TC 341 pren ISO :2012 Geotechnical investigation and testing Field testing Part 5: Flexible dilatometer test (ISO/FDIS :2012) Data Limite: TC 341 pren ISO :2012 Geotechnical investigation and testing Field testing Part 7: Borehole jack test (ISO/FDIS :2012) Data Limite: TC 342 pren ISO 10380:2012 Pipework Corrugated metal hoses and hose assemblies (ISO/FDIS 10380:2012) Data Limite: TC 345 pren ISO 10930:2012 Soil quality Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012) Data Limite: TC 345 pren ISO 11063:2012 Soil quality Method to directly extract DNA from soil samples (ISO 11063:2012) Data Limite: TC 345 pren ISO 11267:2012 Soil quality Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants (ISO/DIS 11267:2012) Data Limite: TC 345 pren ISO :2012 Soil quality Determination of the effects of pollutants on soil flora Part 1: Method for the measurement of inhibition of root growth (ISO :2012) Data Limite: TC 345 pren ISO :2012 Soil quality Determination of the effects of pollutants on soil flora Part 2: Effects of contaminated soil on the emergence and early growth of higher plants (ISO :2012) Data Limite: TC 345 pren ISO 16387:2012 Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction (ISO/DIS 16387:2012) Data Limite: TC 345 pren ISO 22155:2012 Soil quality Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers Static headspace method (ISO 22155:2011) Data Limite: TC 345 pren ISO :2012 Soil quality Sampling of soil invertebrates Part 5: Sampling and extraction of soil macro-invertebrates (ISO :2011) Data Limite: TC 345 pren ISO 28258:2012 Soil quality Digital exchange of soil-related data (ISO/DIS 28258:2012) Data Limite: TC 346 pren :2012 Conservation of cultural heritage Guidelines for management of environmental conditions - Recommendations for showcases used for exhibition and preservation of cultural property Part 1: General requirements Data Limite: TC 346 pren 16141:2012 Conservation of cultural heritage Guidelines for management of environmental conditions Open storage facilities: definition Data Limite: TC 346 pren 16242:2012 Conservation of cultural property Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property Data Limite: TC 346 pren 16455:2012 Conservation of cultural heritage Determination of soluble salts in natural stone and related materials used in cultural heritage Data Limite: TC 353 pren 16425:2012 Simple Publishing Interface Data Limite: TC 353 pren 16426:2012 Simple Query Interface Data Limite: TC 353 pren ISO/IEC :2012 Information technology - Learning, education and training - Metadata for learning resources Part 1: Framework (ISO/IEC :2011) Data Limite: TC 353 pren ISO/IEC :2012 Information technology - Learning, education and training - Metadata for learning resources Part 2: Dublin Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

106 Core elements (ISO/IEC :2011) Data Limite: TC 354 pren :2012 Leisure karts Part 1: Safety requirements and test methods for karts Data Limite: TC 365 prcen/ts 16080:2012 Internet Content and communications filtering software and services Data Limite: TC 383 pren :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications Principles, criteria, indicators and verifiers Part 2: Conformity assessment including chain of custody and mass balance Data Limite: TC 383 pren :2012 Sustainability criteria for the production of biofuels and bioliquids for energy applications Principles, criteria, indicators and verifiers Part 4: Calculation methods of the greenhouse gas emission balance using a life cycle analysis approach Data Limite: TC 387 pren 16104:2012 Food data Structure and interchange format Data Limite: TC CSC01 pren :2012 Vinegar Isotopic analysis of acetic acid and water Part 1: 2H-NMR analysis of acetic acid Data Limite: TC CSC01 pren :2012 Vinegar Isotopic analysis of acetic acid and water Part 2: 13C-IRMS analysis of acetic acid Data Limite: TC CSC01 pren :2012 Vinegar Isotopic analysis of acetic acid and water Part 3: 18O-IRMS analysis of water in wine vinegar Data Limite: TC CST01 pren ISO 7840:2012 Small craft Fire-resistant fuel hoses (ISO/DIS 7840:2012) Data Limite: TC CST01 pren ISO 8469:2012 Small craft Non-fire-resistant fuel hoses (ISO/DIS 8469:2012) Data Limite: TC CSC01 pren ISO 9235:2012 Aromatic natural raw materials Vocabulary (ISO/DIS 9235:2012) Data Limite: TC CST01 pren ISO 10088:2012 Small craft Permanently installed fuel systems (ISO/DIS 10088:2012) Data Limite: TC CSF01 pren ISO :2012 Diagrams for the chemical and petrochemical industry Part 2: Graphical symbols (ISO/FDIS :2012) Data Limite: TC CST01 pren ISO 13297:2012 Small craft Electrical systems Alternating current installations (ISO/FDIS 13297:2012) Data Limite: TC CST01 EN ISO 16147:2002 /pra 1:2012 Small craft Inboard diesel engines - Engine-mounted fuel and electrical components Amendment 1 (ISO 16147:2002/DAM 1:2012) Data Limite: TC CST01 pren ISO 21487:2012 Small craft Permanently installed petrol and diesel fuel tanks (ISO/FDIS 21487:2012) Data Limite: TC CST01 pren ISO 25197:2012 Small craft Electrical/electronic control systems for steering, shift and throttle (ISO/FDIS 25197:2012) Data Limite: TC CSM11 pren ISO 7625:2012 Sintered metal materials, excluding hardmetals Preparation of samples for chemical analysis for determination of carbon content (ISO/FDIS 7625:2012) Data Limite: TC CSM11 pren ISO 13517:2012 Metallic powders Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) (ISO/DIS 13517:2012) Data Limite: TC CSS12 prcen/tr 16478:2012 Surveillance from first commissioning on measuring devices used in natural gas supply to the installa- tions of the activities under the Directive 2003/87/EC establishing a scheme of CO2 emissions trading Data Limite: TC CSN21 pren ISO :2012 Natural gas Determination of composition and associated uncertainty by gas chromatography Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO/DIS :2012) Data Limite: TC CSN21 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

107 pren ISO 10723:2012 Natural gas Performance evaluation for analytical systems (ISO/FDIS 10723:2012) Data Limite: TC ECISS/100 pren ISO 377:2012 Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO/DIS 377:2012) Data Limite: TC ECISS/101 pren ISO 643:2012 Steels Micrographic determination of the apparent grain size (ISO/FDIS 643:2012) Data Limite: TC ECISS/101 pren ISO 9513:2012 Metallic materials Calibration of extensometer systems used in uniaxial testing (ISO/FDIS 9513:2012) Data Limite: TC ECISS/101 pren ISO :2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method (ISO/DIS :2012) Data Limite: TC ECISS/101 pren ISO :2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines (ISO/DIS :2012) Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 1: Zinc and zinc-alloy coated steel barbed wire Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 3: Hexagonal steel wire mesh products for civil engineering purposes Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 4: Steel wire welded mesh fencing Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 5: Steel wire woven hinged joint and knotted mesh fencing Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 6: Steel wire chain link fencing Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 7: Steel wire welded panels for fencing Data Limite: TC ECISS/106 pren :2012 Steel wire and wire products for fencing and netting Part 8: Welded mesh gabion products Data Limite: TC ECISS/108 pren 10107:2012 Grain-oriented electrical steel strip and sheet delivered in the fully processed state Data Limite: TC ECISS/109 EN 10268:2006 /pra 1:2012 Cold rolled steel flat products with higher yield strength for cold forming Technical delivery conditions Data Limite: TC ECISS/110 pren 10255:2012 Non-Alloy steel tubes suitable for welding, threading and other joining methods Technical delivery conditions Data Limite: TC ECISS/110 pren 10358:2012 Unalloyed steel plumbing fittings Fittings with press ends for unalloyed steel tubes Data Limite: TC ECISS/110 pren ISO :2012 Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports (ISO/DIS :2012) Data Limite: TC ECISS/110 pren ISO :2012 Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO/DIS :2012) Data Limite: TC ECISS/110 pren ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems (ISO/FDIS 3183:2012) Data Limite: TC ECISS/110 pren ISO :2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks (ISO/DIS :2012) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

108 TC ECISS/110 pren ISO :2012 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 2: Single layer fusion-bonded epoxy coatings (ISO/DIS :2012) Data Limite: TC ECISS/111 pren :2012 Founding Technical conditions of delivery Part 2: Additional requirements for steel castings Data Limite: TC AECMA pren :2012 Aerospace series Cables, electrical, for general purpose - Operating temperatures between - 55 C and 260 C Part 009: DRA family, single and multicore assembly - Product standard Data Limite: TC AECMA pren 2838:2012 Aerospace series Chloroprene rubber (CR) - Heat resistance Hardness 70 IRHD Data Limite: TC AECMA pren 2839:2012 Aerospace series Chloroprene rubber (CR) - Heat resistance Hardness 80 IRHD Data Limite: TC AECMA pren 2840:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) Mineral oil resistant - Hardness 50 IRHD Data Limite: TC AECMA pren 2841:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant Hardness 60 IRHD Data Limite: TC AECMA pren 2842:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant Hardness 70 IRHD Data Limite: TC AECMA pren 2843:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 50 IRHD Data Limite: TC AECMA pren 2844:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant Hardness 90 IRHD Data Limite: TC AECMA pren 2845:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 50 IRHD Data Limite: TC AECMA pren 2846:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 60 IRHD Data Limite: TC AECMA pren 2847:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 70 IRHD Data Limite: TC AECMA pren 2848:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 80 IRHD Data Limite: TC AECMA pren 2849:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Fuel and synthetic oil resistant Hardness 70 IRHD Data Limite: TC AECMA pren :2012 Aerospace series Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 C or 200 C continuous Part 001: Technical specification Data Limite: TC AECMA pren :2012 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 025: Cable outlet, style A, straight, unsealed, with cable tie strain relief for EN Product standard Data Limite: TC AECMA pren :2012 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 027: Cable outlet, style A, 45, unsealed, with cable tie strain relief for EN Product standard Data Limite: TC AECMA pren :2012 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 038: Manual installation tool, style Z, for installation of stainless steel shield termination band EN , to cable outlet accessories - Product standard Data Limite: TC AECMA pren :2012 Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 005: Size 2 plug - Product standard Data Limite: TC AECMA pren :2012 Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 006: Size 3 receptacle - Product standard Data Limite: TC AECMA pren :2012 Aerospace series Connectors, plug and receptacle, Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

109 electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 007: Size 3 plug - Product standard Data Limite: TC AECMA pren :2012 Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 008: Size 4 receptacle - Product standard Data Limite: TC AECMA pren :2012 Aerospace series Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 C continuous Part 009: Size 4 plug - Product standard Data Limite: TC AECMA pren 3697:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant Hardness 60 IRHD Data Limite: TC AECMA pren 3698:2012 Aerospace series Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant Hardness 70 IRHD Data Limite: TC AECMA pren 3861:2012 Aerospace series Non-metallic materials - Glass transparencies - Material standard Thermally tempered soda lime float glass Data Limite: TC AECMA pren 3862:2012 Aerospace series Non-metallic materials - Glass transparencies - Material standard Chemically tempered soda lime float glass Data Limite: TC AECMA pren 3863:2012 Aerospace series Non-metallic materials - Glass transparencies - Test methods Determination of flatness Data Limite: TC AECMA pren 3866:2012 Aerospace series Non-metallic materials - Glass tranparencies - Test methods Determination of ream and surface ripple Data Limite: TC AECMA pren 4106:2012 Aerospace series Non-metallic materials - Structural adhesive systems - Paste adhesive Technical specification Data Limite: TC AECMA pren :2012 Aerospace series Bonding straps for aircraft Part 001: Technical specification Data Limite: TC AECMA pren 4488:2012 Aerospace series Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking Torque strength 2 Nm Data Limite: TC AECMA pren 4491:2012 Aerospace series Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking Torque strength 16 Nm Data Limite: TC AECMA pren 4492:2012 Aerospace series Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking Torque strength 19 Nm Data Limite: TC AECMA pren 4526:2012 Aerospace series Metallic materials - Test methods Sharp edge-notch tensile testing for sheet and strip Data Limite: TC AECMA pren :2012 Aerospace series Quality management systems Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs Data Limite: TC AECMA pren :2012 Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 004: Description methods Data Limite: TC AECMA pren :2012 Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 011: Reference process description "Data preparation" Data Limite: TC AECMA pren :2012 Aerospace series LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 012: Reference process description ''Ingest'' Data Limite: TC AECMA pren :2012 Aerospace series LOTAR LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 013: Reference process description ''Archival Storage'' Data Limite: TC AECMA pren :2012 Aerospace series LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 014: Reference process description ''Retrieval'' Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

110 TC AECMA pren :2012 Aerospace series LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data Part 015: Reference process description ''Removal'' Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

111 5.2 Questionários preliminares Lista de documentos de referência (RD) objeto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

112 5.3 Comités Técnicos do CEN Lista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais não existe ONS (Organismo de Normalização Setorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ. AECMA European association of aerospace manufacturers CEN/TC 12 Materials, equipment and offshore structures for petroleum and natural gas industries CEN/TC 44 Household refrigerating appliances and commercial refrigerated cabinets CEN/TC 50 Lighting columns and spigots CEN/TC 53 Temporary works equipment CEN/TC 87 Gas fuelled smokers lighters CEN/TC 88 Thermal insulating materials and products CEN/TC 89 Thermal performance of buildings and building components CEN/TC 99 Wallcoverings CEN/TC 105 Valves and fittings to equip radiators CEN/TC 107 Pre-fabricated district heating pipe systems CEN/TC 113 Heat pumps and air conditioning units CEN/TC 123 Lasers and laser related equipment CEN/TC 125 Masonry CEN/TC 128 Roof covering products for discontinuous laying and products for wall cladding CEN/TC 130 Space heating appliances without integral heat sources CEN/TC 135 Execution of steel structures CEN/TC 136 Sports, playground and other recreational equipment CEN/TC 145 Rubber and plastics machines - Safety CEN/TC 146 Packaging machines - Safety CEN/TC 148 Continuous handling equipment and systems - Safety CEN/TC 149 Rail-dependent storage and retrieval equipment - Safety CEN/TC 150 Industrial trucks - Safety CEN/TC 151 Construction equipment and building material machines - Safety CEN/TC 152 Fairground and amusement park machinery and structures - Safety CEN/TC 153 Food processing machinery - Safety and hygiene specifications CEN/TC 156 Ventilation for buildings CEN/TC 163 Sanitary appliances Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

113 CEN/TC 166 Chimneys CEN/TC 167 Structural bearings CEN/TC 169 Lighting applications CEN/TC 197 Pumps CEN/TC 198 Printing and paper machinery - Safety CEN/TC 200 Tannery machinery - Safety CEN/TC 171 Heat cost allocation CEN/TC 173 Brushware CEN/TC 176 Heat meters CEN/TC 177 Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with open structure CEN/TC 178 Paving units and kerbs CEN/TC 182 Refrigerating systems, safety and environmental requirements CEN/TC 183 Waste management CEN/TC 186 Industrial thermoprocessing - Safety CEN/TC 188 Conveyor belts CEN/TC 189 Geotextiles and geotextile-related products CEN/TC 190 Foundry technology CEN/TC 193 Adhesives CEN/TC 195 Air filters for general air cleaning CEN/TC 196 Machines for underground mines - Safety CEN/TC 201 Leather and imitation leather goods and footwear manufacturing machinery - Safety CEN/TC 202 Foundry machinery CEN/TC 216 Chemical disinfectants and antiseptics CEN/TC 217 Surfaces for sport areas CEN/TC 219 Cathodic protection CEN/TC 221 Metallic shop-fabricated tanks CEN/TC 222 Feather and down as filling material for any article, as well as finished articles filled with feather and down CEN/TC 225 Bar coding CEN/TC 226 Road equipment CEN/TC 232 Compressors - Safety CEN/TC 239 Rescue systems CEN/TC 241 Gypsum and gypsum based products CEN/TC 242 Safety requirements for passenger transportation by rope CEN/TC 245 Leisure accommodation vehicles Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

114 CEN/TC 247 Controls for mechanical building services CEN/TC 291 Self-service shopping trolleys CEN/TC 253 Self adhesive tapes CEN/TC 256 Railway applications CEN/TC 259 Medical alarms and signals CEN/TC 263 Secure storage of cash, valuables and data media CEN/TC 270 Internal combustion engines CEN/TC 271 Surface treatment equipment - Safety CEN/TC 273 Logistics CEN/TC 274 Aircraft ground support equipment CEN/TC 277 Suspended ceilings CEN/TC 278 Road transport and traffic telematics CEN/TC 279 Value management - Value analysis, functional analysis CEN/TC 280 Offshore containers CEN/TC 283 Precious metals - Application in jewellery and associated products CEN/TC 288 Execution of special geotechnical works CEN/TC 289 Leather CEN/TC 293 Technical aids for disabled persons CEN/TC 296 Tanks for transport of dangerous goods CEN/TC 297 Free-standing industrial chimneys CEN/TC 301 Electrically propelled road vehicles CEN/TC 303 Floor screeds and in-situ floorings in buildings CEN/TC 305 Potencially explosive atmospheres - Explosion prevention and protection CEN/TC 309 Footwear CEN/TC 310 Advanced manufacturing technologies CEN/TC 313 Industrial centrifugs - Safety requirements (provisional) CEN/TC 314 Mastic asphalt for waterproofing CEN/TC 315 Spectator accomodations CEN/TC 317 Derivates from coal from pyrolisis CEN/TC 318 Hydrometry CEN/TC 320 Transportation services CEN/TC 322 Equipment for metal production and rolling mills - Safety requirements CEN/TC 290 Dimensional and geometrical product specification and verification CEN/TC 323 Raised access floors CEN/TC 324 Castors and wheels Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

115 CEN/TC 325 Prevention of crime by urban planning and building design (provisional) CEN/TC 326 Gas supply for natural gas vehicles (NGV) CEN/TC 328 Standard measuring system for cleaning performance CEN/TC 329 Criteria for describing tourist services in objective tourist information systems CEN/TC 332 Laboratory equipment (provisional) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

116 6. Projetos de normas e propostas de estudo de novas normas do Comité Europeu de Normalização Eletrotécnica (CENELEC) Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos do CENELEC. 6.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. FprEN :2012 High-voltage switchgear and controlgear Part 101: Synthetic testing (IEC :201X) BTTF 62-3 FprEN :2012 Operation of electrical installations Part 1: General requirements Data Limite: BTTF pren :2012 Alcohol interlocks - Test methods and performance requirements Part 1: Instruments for drink-driving-offender programs Data Limite: BTTF pren :2012 Alcohol interlocks - Test methods and performance requirements Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use Data Limite: BTTF pren :2012 Electrical equipment for furnances and ancillary equipment Part 1: Requirements for application design and installation Data Limite: BTTF pren :2012 Electrical equipment for furnances and ancillary equipment Part 2: Requirements for design, development and type approval of safety devices and subsystems Data Limite: SC 9XC EN 50119:2009 /FprA A:2012 Railway applications - Fixed installations - Electric traction overhead contact lines Data Limite: SC 9XB pren :2012 Railway applications - Environmental conditions for equipment Part 1: Equipment on board rolling stock SC 9XC FprEN :2012 Railway applications - Fixed installations - Particular requirements for alternating currente switchgear Part 1: Circuit-breakers with nominal voltage above 1 kv SC 9XC FprEN :2012 Railway applications - Fixed installations - Particular requirements for alternating current switchgear Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kv SC 9XB pren 50153:2012 Railway applications - Rolling stock - Protective provisions relating to electrical hazards Data Limite: SC 9XB pren 50343:2012 Railway applications - Rolling stock - Rules for installation of cabling SC 9XC pren :2012 Railway Applications - Fixed Installations - D.C. surge arresters and voltage limiting devices Part 2: Voltage limiting devices SC 9XB EN :2012 /FprEN 1:2012 Railway applications - Rolling stock equipment - Capacitors for power electronic Part 3: Electric double-layer capacitors (IEC :201X/A1:201X) Data Limite: SC 46XA FprEN :2012 Coaxial cables used in cabled distribution networks Part 8: Repair and substitute of damaged buried cables Data Limite: SC 46XC FprEN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 9-1: Sectional specification for screened cables characterised up to 1000 MHz - Horizontal and building backbone cables Data Limite: SC 46XC FprEN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 10-1: Sectional specification for screened cables characteriszed up to 500 MHz - Horizontal floor and building backbone cables Data Limite: SC 46XC Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

117 FprEN :2012 Multi-element metallic cables used in analogue and digital communication and control Part 11-1: Sectional specification for un-screened cables, characteriszed up to 500 MHz - Horizontal and building backbone cables Data Limite: SC 46XC pren :2012 Multi-pair cables used in high bit rate digital access telecommunication networks Part 2: Indoor multi-pair/quad cables for installation in Multi Dwelling Units shaft supporting universal services, xdsl and applications up to 100 MBits over IP Data Limite: SC 205A pren :2012 Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz Part 4:Low rate wide band services (LRWBS) operating between 2 MHz and MHz - Channel allocations SC 31-1 FprEN :2012 Explosive atmospheres Part 14: Electrical installations design, selection and erection (IEC :201X) Data Limite: SC 31-1 FprEN :2012 Explosive atmospheres Part 17: Electrical installations inspection and maintenance (IEC :201X) Data Limite: SC 31-2 FprEN :2012 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d" (IEC :201X) SR 10 FprEN 62701:2012 Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears (IEC 62701:201X) SR 15 FprEN :2012 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame-retarded, shrink ratio 3:1 - Thick and medium wall (IEC :201X) SR 15 EN :2004 /FprA 1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC :2003/A1:201X) SR 15 FprEN :2012 Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements (IEC :201X) SR 27 FprEN :2012 Safety in electroheating installations Part 4: Particular requirements for arc furnace installations (IEC :201X) Data Limite: SR 27 FprEN :2012 Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements (IEC :201X) Data Limite: SR 27 FprEN :2012 Electrical resistance trace heating systems for industrial and commercial applications Part 2: Application guide for system design, installation and maintenance (IEC :201X) Data Limite: SR 29 FprEN :2012 Hearing instruments and hearing instrument systems - General requirements for basic safety and essential performance (IEC :201X) SR 32C FprEN :2012 Miniature fuses Part 7: Miniature fuse-links for special applications (IEC :201X) SR 32A FprEN 60549:2012 High-voltage fuses for the external protection of shunt capacitors (IEC 60549:201X) Data Limite: SR 32B FprHD :2007 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC :201X) SR 32B FprHD :2012 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K SR 32B HD :2010 /FprA 1:2012 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

118 standardized systems of fuses A to F (IEC :2010/A1:201X) SR 34A EN 60081:1998 /FprA 5:2012 Double-capped fluorescent lamps - Performance specifications (IEC 60081:1997/A5:201X) Data Limite: SR 34A EN 61231:2010 /FprA 1:2012 International lamp coding system (ILCOS) (IEC 61231:2010/A1:201X) Data Limite: SR 34A EN 62031:2008 /FprA 1:2012 LED modules for general lighting - Safety specifications (IEC 62031:2008/A1:201X) SR 34A EN 62035:2000 /FprA 3:2012 Discharge lamps (excluding fluorescent lamps) - Safety specifications (IEC 62035:1999/A3:201X) Data Limite: SR 34A FprEN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications SR 34A FprEN :2012 LED - Binning Part 1: General requirements and white grid (IEC :201X) Data Limite: SR 35 FprEN 62281:2012 Safety of primary and secondary lithium cells and batteries during transport (IEC 62281:201X) Data Limite: SR 36 FprEN 60507:2012 Artificial pollution tests on high-voltage ceramic and glass to be used on a.c. systems (IEC 60507:201X) Data Limite: SR 38 FprEN :2012 Instrument transformers Part 4: Combined transformers (IEC :201X) Data Limite: SR 40 FprEN :2012 Packaging of components for automatic handling Part 4: Stick magazines for electronic components encapsulated in packages of different forms (IEC :201X) SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 2: Sectional specification - Lead-screw actuated and rotary preset potentiometers (IEC :201X) Data Limite: SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 2: Sectional specification: lead-screw actuated and rotary preset potentiometers (IEC :201X) Data Limite: SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 5: Sectional specification - Single-turn rotary low-power wirewound and nonwirewound potentiometers (IEC :201X) Data Limite: SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 5: Sectional specification: single-turn rotary low-power wirewound and nonwirewound potentiometers (IEC :201X) Data Limite: SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 6: Sectional specification - Surface mount preset potentiometers (IEC : 201X) Data Limite: SR 40 FprEN :2012 Potentiometers for use in electronic equipment Part 6: Sectional specification: Surface mount preset potentiometers (IEC : 201X) Data Limite: SR 46F FprEN :2012 Radio-frequency connectors Part 1: Generic specification - General requirements and measuring methods (IEC :201X) Data Limite: SR 47 EN :2006 /FprA 1:2012 Semiconductor devices - Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (IEC :2006/A1:201X) Data Limite: SR 47F FprEN :2012 Semiconductor devices - Micro-electromechanical devices Part 18: Bend testing methods of thin film materials (IEC :201X) Data Limite: SR 47A FprEN :2012 Integrated circuits - Measurement of impulse immunity Part 3: Non-synchronous transient injection method Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

119 (IEC :201X) Data Limite: SR 47 FprEN 62483:2012 Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes (IEC 62483:201X) SR 48B EN :2006 /FprA 1:2012 Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance (IEC :2006/A1:201X) Data Limite: SR 48B FprEN :2012 Connectors for electronic equipment - Product requirements Part 2-109: Circular connectors - Detail specification for connectors M 12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz (IEC :201X) Data Limite: SR 48D FprEN :2012 Mechanical structures for electronic equipment - Tests for IEC and IEC Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks (IEC :201X) SR 49 FprEN :2012 Measurement of quartz crystal unit parameters Part 6: Measurement of drive level dependence (DLD) (IEC :201X) Data Limite: SR 49 FprEN 62276:2012 Single Crystal Wafers for Surface Acoustic Wave (SAW) devices applications - Specicication and measuring method (IEC 62276:201X) Data Limite: SR 51 FprEN 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance (IEC 62358:201X) Data Limite: SR 51 FprEN :2012 High frequency inductive components Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment (IEC :201X) Data Limite: SR 56 FprEN 62551:2012 Analysis techniques for dependability - Petri net techniques (IEC 62551:201X) SR 56 FprEN 62673:2012 Methodology for communication network dependability assessment and assurance (IEC 62673:201X) SR 65B FprEN :2012 Programmable controllers Part 6: Functional safety (IEC :201X) SR 65C FprEN :2012 specifications Part 3-14: Data-link layer service definition - Type 14 elements (IEC :201X) SR 65C FprEN :2012 specifications Part 3-19: Data-link layer service definition - Type 19 elements (IEC :201X) SR 65C FprEN :2012 specifications Part 3-22: Data-link layer service definition - Type 22 elements (IEC :201X) SR 65C FprEN :2012 specifications Part 4-X: Data-link layer protocol specification - Type x elements (IEC X:201X) SR 65A FprEN :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC :201X) SR 65A FprEN :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems (IEC :201X) SR 65A FprEN :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

120 field bus interfaces according to IEC (IEC :201X) SR 65E FprEN 62382:2012 Electrical and instrumentation loop check (IEC 62382:201X) SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC :201X) Data Limite: SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for HAND-HELD and hand-manipulated current sensors for electrical test and measurement (IEC :201X) SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC :201X) Data Limite: SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC :201X) Data Limite: SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes (IEC :201X) Data Limite: SR 66 FprEN :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for laboraty equipment for in vitro diagnostic (IVD) medical equipment (IEC :201X) Data Limite: SR 68 FprEN :2012 Magnetic materials Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip (IEC : A1: A2:2012) Data Limite: SR 68 FprEN :2012 Magnetic materials Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials (IEC :201X) Data Limite: SR 80 FprEN :2012 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) Part 1: Voyage data recorder (VDR) - Performance requirements, methods of testing and required test results (IEC :201X) Data Limite: SR 80 FprEN :2012 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment fo the Automatic Identification System (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques (IEC :201X) SR 85 FprEN 60688:2012 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals (IEC 60688: 201X) Data Limite: SR 85 FprEN :2012 Power quality measurement in power supply systems Part 1: Power Quality Instruments (PQI) (IEC :201X) Data Limite: SR 85 FprEN :2012 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements (IEC :201X) Data Limite: SR 86C FprEN :2012 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC :201X) Data Limite: SR 86C FprEN :2012 Fiber optic active components and devices - Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors (IEC :201X) Data Limite: SR 86C FprEN :2012 Dynamic modules Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized) (IEC :201X) Data Limite: SR 86 FprEN :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

121 Optical circuit boards Part 2-4: Tests - Optical transmission test for optical circuit boards without input/output fibres (IEC :201X) Data Limite: SR 89 FprEN :2012 Fire hazard testing Part 9-1: Surface spread of flame - General guidance (IEC :201X) Data Limite: SR 89 FprEN :2012 Fire hazard testing Part 9-2: Surface spread of flame - Summary and relevance of test methods (IEC :201X) Data Limite: SR 90 FprEN :2012 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC :201X) SR 90 FprEN :2012 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC :201X) SR 90 FprEN :2012 Superconductivity Part 18: Mechanical properties measurement - Room temperature tensile test of Agand/or Ag alloy-sheathedbi-2223 and Bi-2212 composite superconductors (IEC :201X) Data Limite: SR 90 FprEN :2012 Superconductivity Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors (IEC :201X) Data Limite: SR 91 EN :2007 /FprA 1:2012 Attachment materials for electronic assembly Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (IEC :2007/A1:201X) Data Limite: SR 91 FprEN :2012 Materials for printed boards and other interconnecting structures Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified withnon-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad (IEC :201X) Data Limite: SR 91 FprEN :2012 Materials for printed boards and other interconnecting structures Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad (IEC :201X) Data Limite: SR 91 FprEN :2012 Materials for printed boards and other interconnecting structures Part 2-39: Reinforced base materials clad and unclad - Modified epoxide and non-epoxide, woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC :201X) Data Limite: SR 91 FprEN :2012 Materials for printed boards and other interconnecting structures Part 2-40: Reinforced base materials clad and unclad - High Performance, modified, non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly (IEC :201X) Data Limite: SR 91 FprEN :2012 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 1: Erosion test method for metal materials without surface processing (IEC :201X) Data Limite: SR 95 FprEN :2012 Measuring relays and protection equipment Part 27: Product safety requirements (IEC :201X) Data Limite: SR 95 FprEN :2012 Measuring relays and protection equipment Part 121: Functional requirements for distance protection (IEC :201X) Data Limite: SR 95 FprEN :2012 Measuring relays and protection equipment Part 149: Functional requirements for thermal electrical relays (IEC :201X) Data Limite: SR 96 FprEN :2012 Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltage exceeding 1000 V Data Limite: SR 96 EN :2009 /FprA 1:2012 Safety of transformers, reactors, power supply units and similar products for voltages up to V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

122 supply units (IEC :2009/A1:201X) Data Limite: SR 101 EN :2004 /FprA 1:2012 Electrostatics Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors (IEC :2003/A1:201X) Data Limite: SR 104 FprEN :2012 Environmental testing Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC :201X) SR 105 FprEN :2012 Fuel cell technologies Part 5-1: Portable fuel cell power systems - Safety (IEC :201X) Data Limite: SR 105 EN :2010 /FprA 1:2012 Fuel cell technologies Part 6-100: Micro fuel cell power systems - Safety (IEC :2010/A1:201X) Data Limite: SR 110 FprEN :2012 Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification (IEC :201X) Data Limite: SR 110 FprEN :2012 Organic light emitting diode (OLED) displays Part 5-3: Measuring methods of image sticking and lifetime (IEC :201X) SR 110 FprEN :2012 LCD Backlight Unit Part 1-1: Generic specification (IEC :201X) Data Limite: SR 110 FprEN :2012 LED backlight unit Part 2: Electro-optical measurement methods of LED backlight unit for liquid crystal displays (IEC :201X) Data Limite: SR 110 FprEN :2012 3D Display devices Part 1-2: Generic - Terminology and letter symbols (IEC :201X) Data Limite: SR 112 FprEN :2012 Electrical insulating materials - Thermal Endurance Properties Part 1: Ageing procedures and evaluation of test results (IEC :201X) Data Limite: SR 112 FprEN :2012 Electrical insulating materials - Determination of the effects of ionizing radiation Part 1: Radiation interaction and dosimetry (IEC :201X) Data Limite: TC 2 FprEN :2012 Rotating electrical machines Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification (IEC :201X) Data Limite: TC 8X pren 50438:2012 Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks Data Limite: TC 9X FprEN :2012 Railway applications - Energy measurement on board trains Part 1: General TC 9X FprEN :2012 Railway applications - Energy measurement on board trains Part 2: Energy measuring TC 9X FprEN :2012 Railway applications - Energy measurement on board trains Part 3: Data handling TC 9X FprEN :2012 Railway applications - Energy measurement on board trains Part 4: Communication TC 9X FprEN :2012 Railway applications - Energy measurement on board trains Part 5: Conformity assessment TC 9X FprEN :2012 Electronic railway equipment - On board driving data recording system Part 1: System specification (IEC :201X) Data Limite: TC 11 FprEN :2012 Overhead electrical lines exceeding AC 1 kv Part 1: General requirements - Common specifications Data Limite: TC 14 FprEN :2012 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air (IEC :201X) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

123 TC 14 FprEN :2012 Power transformers Part 14: Liquid-immersed power transformers using high-temperature insulation materials (IEC :201X) Data Limite: TC 17B FprEN :2012 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) (IEC :201X) Data Limite: TC 17B EN :1997 /FprA A:2012 Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function Data Limite: TC 17B EN :2005 /FprA 1:2012 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment (IEC :2005/A1:201X) Data Limite: TC 17B FprEN :2012 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (IEC :201X) Data Limite: TC 17D FprEN :2012 Low-voltage switchgear and controlgear assemblies Part 4: Assemblies for construction sites (ACS) (IEC :2012) Data Limite: TC 17B FprEN :2012 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) Part 2: Actuator sensor interface (AS-i) (IEC :2008, modif) Data Limite: TC 17B FprEN :2012 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) Part 7: CompoNet (IEC :2010, modif) Data Limite: TC 17AC FprEN :2012 High voltage switchgear and controlgear Part 4 - Handling procedures for sulphur hexafluoride (SF6) (IEC :201X) TC 17AC EN :2009 /FprA 1:2012 High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers (IEC :2008/A1:201X) Data Limite: TC 17AC FprEN :2012 High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kv up to and including 52 kv (IEC :201X) TC 17AC EN :2009 /FprA 1:2012 High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches (IEC :2008/A1:201X) Data Limite: TC 17AC FprEN :2012 High-voltage switchgear and controlgear Part 110: Inductive load switching (IEC :201X) TC 17AC FprEN :2012 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines (IEC :201X) TC 17AC FprEN :2012 High-voltage switchgear and controlgear Part 201: AC solid-insulated enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv (IEC :201X) Data Limite: TC 17AC FprEN :2012 High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation (IEC :201X) Data Limite: TC 17B FprEN :2012 Low-voltage switchgear and controlgear enclosed equipment Part 1: Enclosed switch outside the scope of IEC for various applications, to provide isolation of electrical equipment during repair and maintenance work (IEC :201X) Data Limite: TC 20 pren 50393:2012 Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kv Data Limite: TC 20 pren :2012 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V Part 2: Specific guidance related to EN cable types Data Limite: TC 20 FprHD 603-S2:2012 Distribution cables with extruded insulation for rated Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

124 voltage from 3,6/6 (7,2) kv up to and including 20,8/36 (42) kv Data Limite: TC 20 FprHD 623-S3:2012 Power cables with extruded insulation and their accessories for rated voltages above 36 kv (Um = 42 kv) up to 150 kv (Um = 170 kv) Data Limite: TC 21X FprEN :2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells Part 1: Nickel-cadmium (IEC :201X) Data Limite: TC 22X FprEN :2012 Uninterruptible power systems (UPS) Part 4: Environmental aspects - Requirements and reporting (IEC :201X) Data Limite: TC 23BX EN :2005 /FprA 1:2012 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements (IEC :2002/A1:2011, modif) Data Limite: TC 23BX FprEN :2012 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment (IEC :2011, modif) Data Limite: TC 23BX EN :2012 /FprA A:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements TC 23BX EN :2012 /FprA A:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories TC 26A FprEN :2012 Arc welding equipment Part 3: Arc striking and stabilizing devices (IEC :201X) Data Limite: TC 26A FprEN :2012 Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements (IEC :201X) Data Limite: TC 31 FprEN :2012 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" (IEC :201X) Data Limite: TC 34Z EN :1993 /FprA 48:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (IEC :1969/A48:201X) Data Limite: TC 34Z EN :1993 /FprA 45:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (IEC :1969/A45:201X) Data Limite: TC 34Z EN :1993 /FprA 46:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (IEC :1969/A46:201X) Data Limite: TC 34Z FprEN :2012 Luminaires Part 1: General requirements and tests (IEC :201X) Data Limite: TC 34Z FprEN :2012 Luminaires Part 2-8: Particular requirements - Handlamps (IEC :201X) Data Limite: TC 34Z FprEN :2012 Luminaires Part 2-22: Particular requirements - Luminaires for emergency lighting (IEC :201X) Data Limite: TC 34Z EN :2008 /FprA 2:2012 Lamp controlgear Part 1: General and safety requirements (IEC :2007/A2:201X) Data Limite: TC 34Z FprEN :2012 Lamp controlgear Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) (IEC :201X) Data Limite: TC 34Z FprEN :2012 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC :201X) Data Limite: TC 34Z FprEN :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

125 Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (IEC :201X) Data Limite: TC 34Z FprEN :2012 Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear (IEC :201X) Data Limite: TC 37A FprEN :2012 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. Part 11: Requirements and tests for SPDs in photovoltaic applications TC 40XB EN :2007 /FprAB B:2012 Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 Data Limite: TC 45B pren 62598:2012 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (IEC 62598:2011) TC 55 FprEN :2012 Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire (IEC :201X) Data Limite: TC 55 FprEN :2012 Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire (IEC :201X) Data Limite: TC 55 EN :2008 /FprA 1:2012 Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminum wire (IEC :2008/A1/201X) Data Limite: TC 55 FprEN :2012 Specifications for particular types of winding wires Part 27: Paper tape covered rectangular copper wire (IEC :201X) Data Limite: TC 55 FprEN :2012 Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 (IEC :201X) Data Limite: TC 55 FprEN :2012 Specifications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wire, class 240 (IEC :201X) Data Limite: TC 55 FprEN :2012 Specification for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 (IEC :201X) Data Limite: TC 55 FprEN :2012 Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 180 (IEC :201X) Data Limite: TC 55 EN :2009 /FprA 1:2012 Winding wires - Test methods Part 3: Mechanical properties (IEC :2009/A1:201X) Data Limite: TC 57 FprEN :2012 Communication networks and systems for power utility automation Part 3: General requirements (IEC :201X) TC 57 FprEN :2012 Communication networks and systems for power utility automation Part 7-410: Basic communication struture - Hydroelectric power plants - Communication for monitoring and control (IEC :201X) Data Limite: TC 57 FprEN :2012 Application integration at electric utilities - System interfaces for distribution management Part 1: Interface architecture and general requirements (IEC :201X) Data Limite: TC 57 FprEN :2012 Application integration at electric utilities - System interfaces for distribution management Part 9: Interface standard for meter reading and control (IEC :201X) Data Limite: TC 57 FprEN :2012 Application integration at electric utilities - System interfaces for distribution management Part 100: Implementation profiles (IEC :201X) Data Limite: TC 57 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

126 FprEN :2012 Energy Management System Application Program Interface (EMS-API) Part 452: CIM Static transmission network model profiles Data Limite: TC 57 FprEN :2012 Energy Management System Application Program Interface (EMS-API) Part 453: Diagram Layout Profile (IEC :2012) Data Limite: TC 57 FprEN :2012 Energy Management System Application Program Interface (EMS-API) Part 552: CIM XML Model Exchange Format (IEC :201X) Data Limite: TC 57 FprEN :2012 Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets (IEC :201X) Data Limite: TC 57 FprEN :2012 Framework for energy market communications Part 351: CIM European market model exchange profile (IEC :201X) Data Limite: TC 59X FprEN :2012 Electric instantaneous water heaters Part 1: General requirements Data Limite: TC 59X EN :2010 /FprA A:2012 Household and similar electrical appliances - Test code for the determination of airborne noise Part 1: General requirements TC 59X FprEN 61121:2012 Tumble dryers for household use - Methods for measuring the performance (IEC 61121:2012, modif) Data Limite: TC 59X FprEN 62512:2012 Electric clothes washer-dryers for household use - Methods for measuring the performance (IEC 62512:201X) TC 59X FprEN 62552:2012 Household refrigerating appliances - Characteristics and test methods (IEC 62552:2007, modif + corrigendum Mar 2008) Data Limite: TC 61 EN :2010 /FprA 1:2012 Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC :2009/A1:201X) TC 61 EN :2010 /FprA 1:2012 Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors (IEC :2008/A1:201X) TC 61 FprEN :2012 Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers (IEC :201X) TC 61 EN :2003 /FprA D:2012 Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Data Limite: TC 61 EN :2010 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines Data Limite: TC 61 EN :2010 /FprA C:2012 Household and similar electrical appliances - Safety Part 2-7: Particular requirements for washing machines Data Limite: TC 61 EN :2003 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Data Limite: TC 61 EN :2009 /FprA 1:2012 Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances (IEC :2008/A1:201X) TC 61 EN :2010 /FprA 1:2012 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers (IEC :2008/A1:201X) Data Limite: TC 61 EN :2006 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines (IEC :2006/A2:201X) TC 61 FprEN :2012 Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids (IEC :201X) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

127 TC 61 FprEN :2012 Household and similar electrical applianes - Safety Part 2-21: Particular requirements for storage water heaters (IEC :201X) TC 61 EN :2003 /FprA C:2012 Household and similar electrical appliances - Safety Part 2-23: Particular requirements for appliances for skin or hair care TC 61 EN :2010 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation TC 61 FprEN :2012 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors (IEC :201X) TC 61 EN :2002 /pra A:2012 Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters Data Limite: TC 61 FprEN :2012 Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters (IEC :201X) TC 61 EN :2002 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-45: Particular requirements for portable heating tools and similar appliances TC 61 EN :2003 /FprAB B:2012 Household and similar electrical appliances - Safety Part 2-86: Particular requirements for electric fishing machines TC 61 EN :2003 /FprA A:2012 Household and similar electrical appliances - Safety Part 2-99: Particular requirements for commercial electric hoods TC 61 EN :2006 /FprA 2:2012 Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC :2004/A2:201X) TC 62 FprEN :2012 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests (IEC :201X) Data Limite: TC 62 EN :2010 /FprA 1:2012 Medical electrical equipment Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability (IEC :2010/A1:201X) Data Limite: TC 62 EN :2007 /FprA 1:2012 Medical electrical equipment Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems (IEC :2006/A1:201X) (IEC :2006) (IEC :2003/A1:200 Data Limite: TC 62 FprEN :2012 Medical electrical equipment Part 2-24: Particular requirements for basic safety and essential performance of infusion pumps and controllers (IEC :2012) Data Limite: TC 62 EN :2010 /FprA 1:2012 Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis (IEC :2010/A1:201X) Data Limite: TC 62 FprEN :2012 Medical electrical equipment Part 2-63: Particular requirements for basic safety and essential performance of dental extra-oral X-ray equipment (IEC :201X) TC 62 FprEN :2012 Medical electrical equipment Part 2-65: Particular requirements for basic safety and essential performance of dental intra-oral X-ray equipment (IEC :201X) TC 62 FprEN :2012 Protective devices against diagnostic medical X-radiation Part 1: Determination of attenuation properties of materials (IEC :201X) Data Limite: TC 62 FprEN :2012 Protective devices against diagnostic medical X-radiation Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

128 Part 2: Translucent protective plates (IEC :201X) Data Limite: TC 62 FprEN :2012 Protective devices against diagnostics medical X- Radiation Part 3: Protective clothing, eyewear and protective patient shields (IEC :201X) Data Limite: TC 64 prhd :2012 Low-voltage electrical installations Part 5-55: Selection and erection of electrical equipment - Other electrical equipment Clause Low-voltage generating sets-stand-alone (IEC :2001, modif) Data Limite: TC 64 FprHD :2012 Low-voltage electrical installations Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits (IEC :2001/A3:201X) (fragment 2) TC 64 HD :2007 /FprA 11:2012 Low-voltage electrical installations Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises TC 64 HD :2010 /FprA A:2012 Low-voltage electrical installations Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces Data Limite: TC 65X FprEN :2012 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters (IEC :201X) TC 65X FprEN :2012 specifications Part 1: Overview and guidance for the IEC and IEC series (IEC :201X) Data Limite: TC 65X FprEN :2012 specifications Part 2: Physical layer specification and service definition (IEC :201X) Data Limite: TC 65X FprEN :2012 specifications Part 3-1: Data-link layer service definition (IEC :201X) TC 65X FprEN :2012 specifications Part 3-2: Data-link layer service definition - Type 2 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 3-3: Data-link layer service definition - Type 3 elements (IEC :20X1) TC 65X FprEN :2012 specifications Part 3 -X: Data-link layer service definition - Type x elements (IEC X:201X) TC 65X FprEN :2012 specifications Part 3-4: Data-link layer service definition - Type 4 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 3-12: Data-link layer service definition - Type 12 elements (IEC :20X1) TC 65X FprEN :2012 specifications Part 3-13: Data-link layer service definition - Type 13 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 3-20: Data-link layer service definition - Type 20 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 3-24: Data-link layer service definition - Type 24 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-1: Data-link layer protocol specification - Type 1 elements (IEC :201X) TC 65X FprEN :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

129 specifications Part 4-2: Data-link layer protocol specification - Type 2 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-3: Data-link layer protocol specification - Type 3 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-4: Data-link layer protocol specification - Type 4 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-11: Data-link layer protocol specification - Type 11 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-12: Data-link layer protocol specification - Type 12 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-13: Data-link layer protocol specification - Type 13 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-14: Data-link layer protocol specification - Type 14 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-19: Data-link layer protocol specification - Type 19 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-20: Data-link layer protocol specification - Type 20 elements (IEC :201X) TC 65CX FprEN :2012 specifications Part 4-22: Data-link layer protocol specification - Type 22 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 4-24: Data-link layer protocol specification - Type 24 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-2: Application layer service definition - Type 2 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-3: Application layer service definition - Type 3 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-4: Application layer service definition - Type 4 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-5: Application layer service definition - Type 5 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-9: Application layer service definition - Type 9 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-10: Application layer service definition - Type 10 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-12: Application layer service definition - Type 12 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-13: Application layer service definition - Type 13 elements (IEC :201X) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

130 TC 65X FprEN :2012 specifications Part 5-14: Application layer service definition - Type 14 elements (IEC :201X) TC 65X pren :2012 TC 65X pren :2012 TC 65X FprEN :2012 specifications Part 5-19: Application layer service definition - Type 19 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-20: Application layer service definition - Type 20 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-23: Application layer service definition - Type 23 elements IEC Ed. 1.0, Specifications (IEC :201X) TC 65CX FprEN :2012 specifications Part 5-22: Application layer service definition - Type 22 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 5-24: Application layer service definition - Type 24 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-2: Application layer protocol specification - Type 2 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-3: Application layer protocol specification - Type 3 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-4: Application layer protocol specification - Type 4 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-5: Application layer protocol specification - Type 5 elementos (IEC :201X) TC 65X FprEN :2012 specifications Part 6-9: Application layer protocol specification - Type 9 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-x: Application layer protocol specification - Type x elements TC 65X FprEN :2012 specifications Part 6-10: Application layer protocol specification - Type 10 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-12: Application layer protocol specification - Type 12 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-13: Application layer protocol specification - Type 13 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-14: Application layer protocol specification - Type 14 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-19: Application layer protocol specification - Type 19 elements (IEC :201X) TC 65X Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

131 FprEN :2012 specifications Part 6-20: Application layer protocol specification - Type 20 elements (IEC :201X) TC 65CX FprEN :2012 specifications Part 6-22: Application layer protocol specification - Type 22 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-23: Application layer protocol specification - Type 23 elements (IEC :201X) TC 65X FprEN :2012 specifications Part 6-24: Application layer protocol specification - Type 24 elements (IEC :201X) TC 65X FprEN :2012 Function blocks Part 1: Architecture (IEC :201X) TC 65X FprEN :2012 Function blocks Part 2: Software tool requirements (IEC :201X) TC 65X FprEN :2012 Industrial communication networks - Profiles Part 1: Fieldbus profiles (IEC :201X) Data Limite: TC 65X FprEN :2012 Industrial communication networks - Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC (IEC :201X) Data Limite: TC 65X FprEN 62703:2012 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:201X) Data Limite: TC 65X FprEN 62734:2012 Industrial communication networks - Wireless communication network and communication profiles - ISA a (IEC 62734:201X) Data Limite: TC 79 FprTS :2012 Alarm systems - Alarm transmission systems and equipment Part 9: Requirements for common protocol for alrm transmission using the Internet protocol Data Limite: TC 79 pren :2012 Alarm systems - Intrusion and hold-up systems Part 10: Application specific requirements for Supervised Premises Transceiver (SPT) TC 79 FprEN :2012 Video surveillance systems for use in security applications Part 1-1: Video system requirements (IEC :201X) Data Limite: TC 79 FprEN :2012 Video surveillance systems for use in security applications Part 1-2: Video transmission - General video transmission - requirements (IEC :201X) Data Limite: TC 79 FprEN :2012 Video surveillance systems for use in security applications Part 2-1: Video transmission protocols - General requirements (IEC :201X) Data Limite: TC 79 FprEN :2012 Video surveillance systems for use in security applications Part 2-2: Video transmission protocols - IP interoperability implementation based on HTTP and REST services (IEC :201X) Data Limite: TC 79 FprEN :2012 Video surveillance systems for use in security applications Part 2-3: Video transmission protocols - IP interoperability implementation based on web services (IEC :201X) Data Limite: TC 82 EN 50530:2010 /FprA A:2012 Overall efficiency of grid connected photovoltaic inverters Data Limite: TC 82 FprEN :2012 Photovoltaic devices Part 8: Measurement of spectral response of a photovoltaic (PV) device (IEC :201X) Data Limite: TC 82 FprEN 62116:2012 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters (IEC 62116:201X) Data Limite: TC 82 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

132 FprEN :2012 Concentrator photovoltaic (CPV) performance testing Part 1: Standard conditions (IEC :201X) Data Limite: TC 82 FprEN 62716:2012 Ammonia corrosion testing of photovoltaic (PV) modules (IEC 62716:201X) Data Limite: TC 86A FprTR 50510:2012 Fibre optic access to end-user - A guideline to buiding of FTTX fibre optic network TC 86A pren 50582:2012 Method of test for resistance to fire of unprotected optical fibre cables for use in emergency circuits (diameter less than or equal to 20 mm) TC 86A FprEN :2012 Optical fibre cables Part 1-23: Generic specification - Basic optical cable test procedures -Cable elements Test Methods (IEC :201X) Data Limite: TC 86A FprEN :2012 Optical fibre cables Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods (IEC :201X) Data Limite: TC 86A FprEN :2012 Optical fibre cables Part 2-20: Indoor cables - Family specification for multi-fibre optical cables (IEC :201X) Data Limite: TC 86A FprEN :2012 Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC :201X) Data Limite: TC 86A FprEN :2012 Optical fibre cables Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables (IEC : 201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-11: Tests - Axial compression (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-14: Tests - Optical power (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-19: Tests - Damp heat (steady state) (IEC :201X) TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-4: Examinations and measurements - Attenuation (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-49: Measurement: Guide pin retention force for rectangular ferrule multi-fibre connectors (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-52: Measurement -Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangle ferrule, single mode fibres (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment (IEC :201X) TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

133 components - Performance standard Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 089-2: Non-connectorised single-mode bidirectional OTDR monitoring WWDM devices for Category C - Controlled environment (IEC :201X) Data Limite: TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C- Controlled environments (IEC :201X) TC 86BXA FprEN :2012 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices Part 1: Generic specification (IEC :201X) Data Limite: TC 88 FprEN :2012 Wind turbines Part 2: Small wind turbines (IEC :201X) Data Limite: TC 88 FprEN :2012 Wind turbines Part 11: Acoustic noise measurement techniques (IEC :201X) TC 100X FprEN :2012 Sound system equipment Part 3: Amplifiers (GMT) (IEC :201X) Data Limite: TC 100X FprA :2012 Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission (IEC :2005/A1:201X) Data Limite: TC 100X FprEN :2012 Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (IEC :2005/A1:201X) Data Limite: TC 100X EN :2009 /FprA 1:2012 Consumer audio/video equipment - Digital interface Part 8: Transmission of ITU-R BT.601 style digital video data (IEC :2008/A1:201X) Data Limite: TC 100X FprEN :2012 Common control interface for networked digital audio and video products Part 5-2: Transmission over networks - Signalling (IEC :201X) Data Limite: TC 100X FprEN 62394:2012 Service diagnostic interface for consumer electronics products and networks - Implementation for ECHONET (IEC 62394:201X) TC 100X FprEN :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and protocols (IEC :201X) Data Limite: TC 100X FprEN :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats (IEC :201X) Data Limite: TC 100X FprEN :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 3: Link protection (IEC :201X) Data Limite: TC 100X FprEN :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions (IEC :201X) Data Limite: TC 100X FprEN :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5-1: DLNA device profile guidelines - General (IEC :201X) Data Limite: TC 100X FprEN :2012 Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 3:Common API TC 100X FprEN :2012 Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification (IEC :201X) Data Limite: TC 100X FprEN :2012 Universal Serial Bus interfaces for data and power Part 2: USB micro-usb cables and connectors specification (IEC :201X) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

134 TC 100X FprEN :2012 Universal Serial Bus interfaces for data and power Part 3: USB battery charging specification (IEC :201X) Data Limite: TC 100X FprEN :2012 Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus cables and connectors class (IEC :201X) Data Limite: TC 106X pren :2012 Measurement of DC magnetic fields, AC magnetic and electric fields from 1 Hz to 100 khz with regard to exposure of human beings - Special requirements for instruments (IEC :201X) Data Limite: TC 108X FprEN 62623:2012 Desktop and notebook computers - Measuring the energy consumption (IEC 62623:201X) TC 116 EN :2011 /FprAB B:2012 Hand-held motor-operated electric tools - Safety Part 2-22: Particular requirements for cut-off machines Data Limite: TC 116 FprEN 6XXXX-3-1:2012 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part 3-1: Particular requirements for transportable table saws (IEC 6XXXX-3-1:201X) Data Limite: TC 116 FprEN 6XXXX-3-6:2012 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part 3-6: Particular requirements for diamond drills with liquid system (IEC 6XXXX-3-6:201X) Data Limite: TC 210 FprEN :2012 Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement Part 1: Apparatus for in-home use Data Limite: TC 210 EN :2004 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (CISPR :2003/A3:201X) Data Limite: TC 210 EN :2004 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances (CISPR :2003/A3:201X) Data Limite: TC 210 EN :2009 /FprA 3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements (CISPR :2008/A3:201X) Data Limite: TC 210 EN :2011 /FprA 1:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (CISPR :2011/A1:201X) Data Limite: TC 210 EN 55020:2007 /FprA 1:2012 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2006/A1:201X) Data Limite: TC 210 FprEN 55035:2012 Electromagnetic compatibility of multimedia equipment - Immunity requirements (CISPR 35:201X) Data Limite: TC 210 EN :2009 /FprA A:2012 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use Part 1: Emissions Data Limite: TC 210 FprEN :2012 Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Conducted disturbances, induced by radio-frequency fields immunity test (IEC :201X) Data Limite: TC 213 EN :2008 /FprA 1:2012 Conduit systems for cable management Part 1: General requirements (IEC :2008/A1:201X) Data Limite: TC 215 EN :2007 /FprAB B:2012 Information technology - Generic cabling systems Part 4: Homes Data Limite: TC 215 EN :2007 /FprAB B:2012 Information technology - Generic cabling systems Part 5: Data centres Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

135 TC 215 pren :2012 Information technology - Generic cabling systems Part 6: Distributed building services TC 215 pren :2012 Information technology - Cabling installation Part 3: Installation planning and practices outside buildings TC 215 FprEN :2012 Information tecchnology - Data centre facilities and infrastructures Part 1: General concepts Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

136 6.2 Propostas de anulação de Normas As propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC. Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

137 6.3 Proposta de estudo de novas normas - "Vilamoura Procedures" Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadas por organismos nacionais membros do CENELEC, com vista à possível elaboração de normas europeias LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

138 6.4 Questionários preliminares Lista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista à sua aceitação como normas europeias. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

139 7. Projetos de Normas e Propostas de Estudo de Novas Normas do Comité Europeu de Normalização (CEN) / Comité Europeu de Normalização Eletrotécnica (CENELEC) 7.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. TC JWGFPR pren :2012 Railway applications - Fire protection on railway vehicles Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

140 8. Projetos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI) 8.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech Part 1: Technical characteristics and methods of measurement Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 4: Specific conditions for fixed radio links and ancillary equipment Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment Part 17: Specific conditions for Broadband Data Transmission Systems Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment Data Limite: pren :2012 Terrestrial Trunked Radio (TETRA); Conformance testing specification Part 1: Radio Data Limite: pren :2012 Terrestrial Trunked Radio (TETRA); Direct Mode Operation (DMO) Part 6: Security Data Limite: pren :2012 Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems Data Limite: pren :2012 Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS) Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 246 GHz Data Limite: pren :2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services Part 1: Common technical requirements Data Limite: pren :2012 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Part 1: Introduction and common requirements Data Limite: pren :2012 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) Data Limite: pren :2012 SAFETY; Remote Power Feeding Installations; Safety requirements for the erection and operation of information technology installations with remote power feeding Data Limite: pren :2012 Advanced Surface Movement Guidance and Control System (A-SMGCS) Part 2: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 2 including external interfaces Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

141 Data Limite: pren :2012 Satellite Earth Stations and Systems (SES); Harmonized EN for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the R&TTE Directive Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

142 8.2 Propostas de anulação de Normas Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

143 9. Projetos de normas e propostas de estudo de novas Normas de Organização Internacional de Normalização (ISO) Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos da ISO. 9.1 Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. FDIS 11640:2012 Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing Data Limite: FDIS 11641:2012 Leather Tests for colour fastness Colour fastness to perspiration Data Limite: FDIS 11642:2012 Leather Tests for colour fastness Colour fastness to water Data Limite: DIS 13574:2012 Industrial furnaces and associated processing equipment Vocabulary Data Limite: FDIS 14268:2012 Leather Physical and mechanical tests Determination of water vapour permeability Data Limite: DIS 17070:2012 Leather Chemical tests Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentchlorophenol content Data Limite: DIS :2012 Leather Determination of ethoxylated alkylphenols Part 1: Direct method Data Limite: Hexagon nuts, style 2 Product grades A and B Data Limite: TC 2 FDIS 4034:2012 Hexagon nuts Product grade C Data Limite: TC 2 FDIS 4035:2012 Hexagon thin nuts (chamfered) Product grades A and B Data Limite: TC 2 FDIS 4036:2012 Hexagon thin nuts (unchamfered) Product grade B Data Limite: TC 2 FDIS 7040:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 Property classes 5, 8 and 10 Data Limite: TC 2 FDIS 7042:2012 Prevailing torque type all-metal hexagon nuts, style 2 Property classes 5, 8, 10 and 12 Data Limite: TC 2 FDIS 7719:2012 Prevailing torque type all-metal hexagon nuts, style 1 Property classes 5, 8 and 10 Data Limite: DIS :2012 Leather Determination of ethoxylated alkylphenols Part 2: Indirect method Data Limite: FDIS 20433:2012 Leather Tests for colour fastness Colour fastness to crocking Data Limite: FDIS 39001:2012 Road traffic safety (RTS) management systems Requirements with guidance for use Data Limite: TC 2 FDIS 4032:2012 Hexagon nuts, style 1 Product grades A and B Data Limite: TC 2 FDIS 8673:2012 Hexagon nuts, style 1, with metric fine pitch thread Product grades A and B Data Limite: TC 2 FDIS 8674:2012 Hexagon nuts, style 2, with metric fine pitch thread Product grades A and B Data Limite: TC 2 FDIS 8675:2012 Hexagon thin nuts (chamfered) with metric fine pitch thread Product grades A and B Data Limite: TC 2 FDIS 10511:2012 Prevailing torque type hexagon thin nuts (with non-metallic insert) TC 2 FDIS 4033:2012 Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

144 TC 2 FDIS 10512:2012 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread Property classes 6, 8 and 10 Data Limite: TC 2 FDIS 10513:2012 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread Property classes 8, 10 and 12 Data Limite: TC 2 ISO 16047:2005 /FDAM 1:2012 Fasteners Torque/clamp force testing AMENDMENT 1 Data Limite: TC 4 ISO 582:1995 /DAM 1:2012 Rolling bearings Chamfer dimensions Maximum values AMENDMENT 1 Data Limite: TC 4 DIS :2012 Rolling bearings Accessories Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves Data Limite: TC 4 DIS :2012 Rolling bearings Accessories Part 2: Dimensions for locknuts and locking devices Data Limite: TC 4 DIS :2012 Rolling bearings Balls Part 1: Steel balls Data Limite: TC 4 DIS :2012 Rolling bearings Balls Part 2: Ceramic balls Data Limite: TC 5 FDIS 10380:2012 Pipework Corrugated metal hoses and hose assemblies Data Limite: TC 6 FDIS 2469:2012 Paper, board and pulps Measurement of diffuse radiance factor (diffuse reflectance factor) Data Limite: TC 6 FDIS 5270:2012 Pulps Laboratory sheets Determination of physical properties Data Limite: TC 6 DIS 23714:2012 Pulps Determination of water retention value (WRV) Data Limite: TC 8 FDIS 3434:2012 Ships and marine technology Heated glass panes for ships' rectangular windows Data Limite: TC 8 FDIS 3730:2012 Shipbuilding and marine structures Mooring winches Data Limite: TC 8 FDIS 11209:2012 Ships and marine technology Large yachts Deck crane and access gangways strength requirements Data Limite: TC 8 DIS :2012 Ships and marine technology Manoeuvring of ships Part 5: Submarine specials Data Limite: TC 8 DIS :2012 Ships and marine technology Manoeuvring of ships Part 6: Model test specials Data Limite: TC 8 FDIS :2012 Ships and marine technology Protective coatings and inspection method Part 1: Dedicated sea water ballast tanks Data Limite: TC 8 FDIS :2012 Ships and marine technology Protective coatings and inspection method Part 2: Void spaces of bulk carriers and oil tankers Data Limite: TC 8 FDIS :2012 Ships and marine technology Protective coatings and inspection method Part 3: Cargo oil tanks of crude oil tankers Data Limite: TC 8 DIS 16165:2012 Ships and marine technology Marine environment protection Terminology relating to oil spill response Data Limite: TC 8 DIS 16446:2012 Ships and marine technology Marine environment protection Adapter for joining dissimilar boom connectors Data Limite: TC 8 FDIS 16548:2012 Ships and marine technology Ship design General guidance on emergency towing procedures Data Limite: TC 8 DIS 16554:2012 Ships and marine technology Marine environment protection Measurement and reporting of underwater sound radiated from merchant ships Data Limite: TC 8 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

145 DIS 16707:2012 Ships and marine technology Marine evacuation systems Determination of capacity Data Limite: TC 8 DIS :2012 Security management systems for the supply chain Electronic port clearance (EPC) Part 1: Message structures Data Limite: TC 10 FDIS :2012 Diagrams for the chemical and petrochemical industry Part 2: Graphical symbols Data Limite: TC 17 DIS 377:2012 Steel and steel products Location and preparation of samples and test pieces for mechanical testing Data Limite: TC 17 FDIS 643:2012 Steels Micrographic determination of the apparent grain size Data Limite: TC 17 DIS 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities Data Limite: TC 17 DIS 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities Data Limite: TC 17 DIS 5950:2012 Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities Data Limite: TC 17 DIS 5951:2012 Hot-rolled steel sheet of higher yield strength with improved formability Data Limite: TC 17 DIS 6316:2012 Hot-rolled steel strip of structural quality Data Limite: TC 17 DIS 6929:2012 Steel products Vocabulary Data Limite: TC 17 DIS 10384:2012 Hot-rolled carbon steel sheet as defined by chemical composition Data Limite: TC 17 DIS 13933:2012 Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emisson spectrometric method Data Limite: TC 20 DIS 5859:2012 Aerospace series Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components Data Limite: TC 20 DIS 6517:2012 Air cargo Certified lower deck containers Design and testing Data Limite: TC 20 ISO 8816:1993 /FDAM 1:2012 Aircraft Solid-state remote power controllers - General requirements Amendment 1 Data Limite: TC 20 ISO 8843:2005 /FDAM 1:2012 Aircraft Crimp-removable contacts for electrical connectors - Identification system Amendment 1 Data Limite: TC 20 DIS 10788:2012 Space systems Lunar simulants Data Limite: TC 20 FDIS 11227:2012 Space systems Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact Data Limite: TC 20 DIS 11505:2012 Surface chemical analysis General procedures for quantitative compositional depth profiling by glow dischargeoptical emission spectrometry Data Limite: TC 20 DIS 13832:2012 Aerospace Wire, aluminum alloy and copper clad aluminum conductors General performance requirements Data Limite: TC 20 DIS 14186:2012 Air cargo Fire containment covers Design, performance and testing requirements Data Limite: TC 20 FDIS 14200:2012 Space environment (natural and artificial) Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO km) Data Limite: TC 20 DIS 15887:2012 Space data and information transfer systems Data systems Lossless data compression Data Limite: TC 20 DIS :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

146 Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing conditions Data Limite: TC 20 DIS 16126:2012 Space systems Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal Data Limite: TC 20 DIS 16127:2012 Space systems Prevention of break-up of unmanned spacecraft Data Limite: TC 20 FDIS 16159:2012 Space systems Launch pad and integration site Facility, system and equipment failure analysis Data Limite: TC 20 DIS 16404:2012 Space systems Programme management Requirements management Data Limite: TC 20 DIS 16698:2012 Space environment (natural and artificial) Methods for estimation of future geomagnetic activity Data Limite: TC 20 DIS 17854:2012 Space data and information transfer systems Flexible advanced coding and modulation scheme for high rate telemetry applications Data Limite: TC 20 DIS 18381:2012 Space data and information transfer systems Lossless multispectral and hyperspectral image compression Data Limite: TC 20 DIS 18382:2012 Space data and information transfer systems Spacecraft onboard interface services RFID-based inventory management systems Data Limite: TC 20 DIS 19631:2012 Aerospace Tube fittings for fluid systems, psi ( kpa) Qualification specification Data Limite: TC 20 DIS 19632:2012 Aerospace series Fitting end, 24 internal cone, external thread, flareless type extra fine thread pitch inch series Design standard Data Limite: TC 20 DIS 22664:2012 Space data and information transfer systems TC (telecommand) space data link protocol Data Limite: TC 20 DIS 22667:2012 Space data and information transfer systems Communications operation procedure-1 Data Limite: TC 20 DIS 22669:2012 Space data and information transfer systems Space link extension (SLE) Return-all-frames service Data Limite: TC 20 DIS 22670:2012 Space data and information transfer systems Space link extension (SLE) Return-channel-frames service Data Limite: TC 20 DIS 26143:2012 Space data and information transfer systems Space link extension (SLE) Return operational control fields service Data Limite: TC 21 FDIS :2012 Fire protection Automatic sprinkler systems Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms Data Limite: TC 21 DIS :2012 Fire protection Automatic sprinkler systems Part 10: Requirements and test methods for domestic sprinklers Data Limite: TC 22 DIS 2974:2012 Diesel engines 60 degree female cones for high-pressure fuel injection components Data Limite: TC 22 DIS :2012 Internal combustion engines Piston rings Part 2: Half keystone rings made of cast iron Data Limite: TC 22 DIS :2012 Internal combustion engines Piston rings Part 4: Half keystone rings made of steel Data Limite: TC 22 FDIS 7641:2012 Road vehicles Trailers up to 3,5 t Calculation of the mechanical strength of steel drawbars Data Limite: TC 22 ISO 10605:2008 /DAM 1:2012 Road vehicles Test methods for electrical disturbances from electrostatic discharge AMENDMENT 1 Data Limite: TC 22 DIS :2012 Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

147 TC 22 DIS :2012 Commercial road vehicles Coupling equipment between vehicles in multiple vehicle combinations Part 3: Strength requirements Data Limite: TC 22 DIS 13052:2012 Road vehicles Trailers up to 3,5t - Requirements for jockey wheels and drawbar supports Data Limite: TC 22 DIS :2012 Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP) Data Limite: TC 22 DIS :2012 Road vehicles Diagnostic communication over K-Line (DoK-Line) Part 2: Data link layer Data Limite: TC 22 DIS :2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale Data Limite: TC 22 DIS :2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 2: Mechanical subsystems Data Limite: TC 22 DIS :2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 3: Electronic subsystems Data Limite: TC 22 DIS :2012 Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 4: User's manual Data Limite: TC 22 FDIS :2012 Road vehicles Ergonomic requirements for the driver's workplace in line-service buses Part 1: General description, basic requirements Data Limite: TC 22 FDIS :2012 Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads Data Limite: TC 22 DIS 17949:2012 Impact test procedures for road vehicles Seating and positioning procedures for anthropomorphic test devices Procedure for the WorldSID 5Oth percentile male side-impact dummy in front outboard seating positions Data Limite: TC 22 DIS :2012 Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements Data Limite: TC 22 DIS :2012 Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements Data Limite: TC 22 FDIS :2012 Road vehicles Standardized repair and maintenance information (RMI) terminology Part 1: General information and use case definition Data Limite: TC 22 DIS :2012 Road vehicles Standardized repair and maintenance information (RMI) terminology Part 2: Standardized process implementation requirements, registration authority Data Limite: TC 22 DIS :2012 Road vehicles Product data exchange between chassis and body work manufacturers (BEP) Part 5: Coding of loader crane bodywork Data Limite: TC 22 FDIS :2012 Diesel engines NOx reduction agent AUS 32 Part 5: Refilling interface for passenger cars Data Limite: TC 22 DIS 1813:2012 Belt drives V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts Electrical conductivity of antistatic belts: Characteristics and methods of test Data Limite: TC 23 DIS :2012 Tractors and machinery for agriculture Seat belts Part 2: Anchorage strength requirements Data Limite: TC 23 DIS 5700:2012 Tractors for agriculture and forestry Roll-over protective structures Static test method and acceptance conditions Data Limite: TC 23 DIS 5718:2012 Harvesting equipment Blades for agricultural rotary mowers Requirements Data Limite: TC 23 DIS :2012 Agricultural tractors Requirements, test procedures and Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

148 acceptance criteria for the operator's field of vision Part 1: Field of vision to the front Data Limite: TC 23 DIS :2012 Agricultural tractors Requirements, test procedures and acceptance criteria for the operator's field of vision Part 2: Field of vision to the side and to the rear Data Limite: TC 23 DIS :2012 Agricultural irrigation equipment Filters for microirrigation Part 2: Strainer-type filters and disc filters Data Limite: TC 23 DIS :2012 Agricultural irrigation equipment Filters Part 3: Automatic self-cleaning strainer-type filters Data Limite: TC 23 ISO 10517:2009 /DAM 1:2012 Powered hand-held hedge trimmers Safety AMENDMENT 1 Data Limite: TC 23 DIS :2012 Tractors and machinery for agriculture and forestry Serial control and communications data network Part 3: Data link layer Data Limite: TC 23 DIS :2012 Tractors and machinery for agriculture and forestry Serial control and communications data network Part 6: Virtual terminal Data Limite: TC 23 DIS :2012 Tractors and machinery for agriculture and forestry Serial control and communications data network Part 10: Task controller and management information system data interchange Data Limite: TC 23 FDIS :2012 Agricultural irrigation equipment Sprinklers Part 3: Characterization of distribution and test methods Data Limite: TC 23 FDIS 16438:2011 Agricultural irrigation equipment Thermoplastic collapsible hoses for irrigation Specifications and test methods Data Limite: TC 23 DIS 27850:2012 Tractors for agriculture and forestry Falling object protective structures Test procedures and performance requirements Data Limite: TC 24 DIS 12154:2012 Determination of density by volumetric displacement Skeleton density by gas pycnometry Data Limite: TC 24 DIS :2012 Measurement and characterization of particles by acoustic methods Part 2: Guidelines for linear theory Data Limite: TC 28 DIS 4261:2012 Petroleum products Fuels (class F) Specifications of gas turbine fuels for industrial and marine applications Data Limite: TC 28 DIS 5163:2012 Petroleum products Determination of knock characteristics of motor and aviation fuels Motor method Data Limite: TC 28 DIS 5164:2012 Petroleum products Determination of knock characteristics of motor fuels Research method Data Limite: TC 28 DIS 9162:2012 Petroleum products Fuels (class F) Liquefied petroleum gases - Specifications Data Limite: TC 28 FDIS 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU Data Limite: TC 28 DIS 16384:2012 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels Dymethylether (DME) Measurement and calculation on boards ships Data Limite: TC 28 DIS 22854:2012 Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline Multidimensional gas chromatography method Data Limite: TC 29 DIS 11529:2012 Milling cutters Designation Shank-type and bore type milling cutters of solid or tipped design or with indexable cutting edges Data Limite: TC 30 FDIS :2012 Water meters intended for the metering of cold potable water and hot water Part 1: Metrological and technical requirements Data Limite: TC 30 FDIS :2012 Water meters intended for the metering of cold potable water and hot water Part 2: Test methods Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

149 Data Limite: TC 30 DIS :2012 Water meters intended for the metering of cold potable water and hot water Part 3: Test report format Data Limite: TC 30 DIS :2012 Water meters intended for the metering of cold potable water and hot water Part 4: Non-metrological requirements not covered in ISO Data Limite: TC 30 DIS :2012 Water meters intended for the metering of cold potable water and hot water Part 5: Installation requirements Data Limite: TC 30 FDIS :2012 Measurement of fluid flow in closed conduits Ultrasonic meters for gas Part 2: Meters for industrial applications Data Limite: TC 31 DIS :2012 Passenger car tyres and rims Part 2: Rims Data Limite: TC 31 ISO 7295:1988 /DAM 1:2012 Tyre valves for aircraft Interchangeability dimensions AMENDMENT 1 Data Limite: TC 31 ISO 9413:2012 /FDAM 1:2012 Tyre valves Dimensions and designation AMENDMENT 1 Data Limite: TC 31 ISO 10231:2003 /DAM 1:2012 Motorcycle tyres Test methods for verifying tyre capabilities AMENDMENT 1 Data Limite: TC 31 DIS 20562:2012 Tyre valves ISO core chambers No. 1, No. 2, No. 3 and No. 4 Data Limite: TC 33 DIS 5017:2012 Dense shaped refractory products Determination of bulk density, apparent porosity and true porosity Data Limite: TC 33 DIS 16334:2012 Monolithic refractory products Determination of resistance to explosive spalling Data Limite: TC 33 DIS 16349:2012 Refractory materials Determination of abrasion resistance at elevated temperature Data Limite: TC 34 DIS 3657:2012 Animal and vegetable fats and oils Determination of saponification value Data Limite: TC 34 DIS 3961:2012 Animal and vegetable fats and oils Determination of iodine value Data Limite: TC 34 DIS 5527:2012 Cereals Vocabulary Data Limite: TC 34 ISO :1992 /DAM 1:2012 Rapeseed Determination of glucosinolates content Part 1: Method using high-performance liquid chromatography AMENDMENT 1 Data Limite: TC 34 DIS 9622:2012 Milk and liquid milk products Guidelines for the application of mid-infrared spectrometry Data Limite: TC 34 FDIS 11132:2012 Sensory analysis Methodology Guidelines for monitoring the performance of a quantitative sensory panel Data Limite: TC 34 DIS 11133:2012 Microbiology of food, animal feed and water Preparation, production, storage and performance testing of culture media Data Limite: TC 34 DIS :2012 Milk and milk products Determination of alkaline phosphatase activity Part 1: Fluorimetric method for milk and milk-based drinks Data Limite: TC 34 DIS 16578:2012 Molecular biomarker analysis General definitions and requirements for microarray detection of specific nucleic acid sequences Data Limite: TC 34 ISO 17372:2008 /DAM 1:2012 Animal feeding stuffs Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography AMENDMENT 1 Data Limite: TC 34 DIS 17758:2012 Instant dried milk Determination of the dispersibility and wettability Data Limite: TC 34 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

150 DIS 20483:2012 Cereals and pulses Determination of the nitrogen content and calculation of the crude protein content Kjeldahl method Data Limite: TC 34 ISO 21570:2005 /DAM 1:2012 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods AMENDMENT 1 Data Limite: TC 35 DIS :2012 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Determination by measurement of the dry-film density Data Limite: TC 35 FDIS :2012 Paints and varnishes Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect Data Limite: TC 35 FDIS :2012 Paints and varnishes Determination of curing characteristics using a free damped oscillation method Part 1: Starting temperature of the curing reaction Data Limite: TC 35 FDIS :2012 Paints and varnishes Determination of curing characteristics using a free damped oscillation method Part 2: Glass transition temperature Data Limite: TC 35 FDIS 15091:2012 Paints and varnishes Determination of electrical conductivity and resistance Data Limite: TC 35 DIS 16925:2012 Paints and varnishes Determination of the resistance of coatings to high-pressure water-jetting Data Limite: TC 35 DIS 16927:2012 Paints and varnishes Determination of the overcoatability and recoatability of a coating Data Limite: TC 35 FDIS 19840:2012 Paints and varnishes Corrosion protection of steel structures by protective paint systems Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces Data Limite: TC 37 FDIS 24611:2012 Language resource management Morpho-syntactic annotation framework (MAF) Data Limite: TC 38 FDIS 105-A11:2012 Textiles Tests for colour fastness Part A11: Determination of colour fasness grades by digital imaging techniques Data Limite: TC 38 DIS 2076:2012 Textiles Man-made fibres Generic names Data Limite: TC 38 ISO 11092:1993 /FDAM 1:2012 Textiles Physiological effects Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) AMENDMENT 1 Data Limite: TC 38 DIS :2012 Textiles Dyestuffs Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic substances Data Limite: TC 38 DIS 20743:2012 Textiles Determination of antibacterial activity of textile products Data Limite: TC 39 DIS :2012 Test conditions for die sinking electro-discharge machines (EDM) Terminology and testing of accuracy Part 1: Single-column machines (cross-slide table type and fixed-table type) Data Limite: TC 39 DIS :2012 Test conditions for die sinking electro-discharge machines (EDM) Terminology and testing of accuracy Part 2: Double-column machines (slide-head type and cross-slide table type) Data Limite: TC 39 DIS :2012 Machine tools Environmental evaluation of machine tools Part 1: Design methodology for energy-efficient machine tools Data Limite: TC 41 FDIS 251:2012 Conveyor belts with textile carcass Widths and lengths Data Limite: TC 41 FDIS 284:2012 Conveyor belts Electrical conductivity Specification and test method Data Limite: TC 41 DIS 1081:2012 Belt drives V-belts and V-ribbed belts, and corresponding grooved pulleys Vocabulary Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

151 TC 41 FDIS 4195:2012 Conveyor belts with heat-resistant rubber covers Heat resistance of covers Requirements and test methods Data Limite: TC 41 FDIS 5285:2012 Conveyor belts Guidelines for storage and handling Data Limite: TC 41 FDIS 9980:2012 Belt drives Grooved pulleys for V-belts (system based on effective width) Geometrical inspection of grooves Data Limite: TC 41 DIS 11749:2012 Belt drive V-ribbed belts for the automotive industry Fatigue test Data Limite: TC 41 FDIS 15147:2012 Light conveyor belts Tolerances on widths and lengths of cut light conveyor belts Data Limite: TC 41 FDIS 16851:2012 Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt Data Limite: TC 41 FDIS 18573:2012 Conveyor belts Test atmospheres and conditioning periods Data Limite: TC 41 DIS 24035:2012 Belt drives Frictional drive belts for the agricultural industry and corresponding pulleys Dimensions Data Limite: TC 42 DIS 12233:2012 Photography - Electronic still picture imaging - Resolution and spatial frequency responses Data Limite: TC 42 DIS 15739:2012 Photography - Electronic still-picture imaging - Noise measurements (Revision ISO 15739:2003) Data Limite: TC 42 FDIS :2012 Graphic technology and photography - Colour characterisation of digital still cameras (DSCs) Part 1: Stimuli, metrology and test procedures Data Limite: TC 42 DIS 18902:2012 Imaging materials - Processed imaging materials - Albums, framing and storage materials (Rev :2007 and Cor. 1:2009) Data Limite: TC 42 DIS 18947:2012 Imaging materials - Photographic reflection prints - Determination of abrasion resistance of photographic images Data Limite: TC 42 DIS :2012 Photography and graphic technology Extended colour encodings for digital image storage, manipulation and interchange Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) Data Limite: TC 43 DIS 362-1:2012 Measurement of noise emitted by accelerating road vehicles Engineering method Part 1: M and N categories Data Limite: TC 43 DIS 11200:2012 Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions Data Limite: TC 43 DIS :2012 Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation Data Limite: TC 43 DIS :2012 Acoustics Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up Part 1: Heavyweight compact floor Data Limite: TC 43 DIS :2012 Acoustics Field measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation Data Limite: TC 44 DIS 2553:2012 Welding and allied processes Symbolic representation on drawings Welded, brazed and soldered joints Data Limite: TC 44 FDIS 4136:2012 Destructive tests on welds in metallic materials Transverse tensile test Data Limite: TC 44 DIS 5817:2012 Welding Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) Quality levels for imperfections Data Limite: TC 44 DIS 5826:2012 Resistance welding equipment Transformers General specifications applicable to all transformers Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

152 Data Limite: TC 44 FDIS 9016:2012 Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination Data Limite: TC 44 FDIS :2012 Soft soldering fluxes Test methods Part 10: Flux efficacy test, solder spread method Data Limite: TC 44 ISO 9539:2010 /DAM 1:2012 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes AMENDMENT 1 Data Limite: TC 44 FDIS 13588:2012 Non-destructive testing of welds Ultrasonic testing Use of automated phased array technology Data Limite: TC 44 DIS 14555:2012 Welding Arc stud welding of metallic materials Data Limite: TC 45 FDIS 1382:2012 Rubber Vocabulary Data Limite: TC 45 FDIS :2012 Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling Data Limite: TC 45 DIS 3385:2012 Flexible cellular polymeric materials Determination of fatigue by constant-load pounding Data Limite: TC 45 DIS 5892:2012 Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification Data Limite: TC 45 DIS 5999:2012 Flexible cellular polymeric materials Polyurethane foam for load-bearing applications excluding carpet underlay Specification Data Limite: TC 45 DIS 6808:2012 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids Specification Data Limite: TC 45 DIS 11619:2012 Polyurethane tubing for use primarily in pneumatic installations Dimensions and specification Data Limite: TC 45 ISO 12243:2003 /DAM 1:2012 Medical gloves made from natural rubber latex Determination of water-extractable protein using the modified Lowry method AMENDMENT 1 Data Limite: TC 45 FDIS 12492:2012 Rubber, raw Determination of water content by the Karl Fischer method Data Limite: TC 45 FDIS 13507:2012 Rubber compounds, raw rubbers and compounding materials Short terms for properties reported in certificates of analysis Data Limite: TC 45 DIS 16301:2012 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools Specification Data Limite: TC 45 DIS 16565:2012 Rubber Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers Data Limite: TC 45 FDIS 18752:2012 Rubber hoses and hose assemblies Wire- or textile-reinforced singlepressure types for hydraulic applications Specification Data Limite: TC 45 DIS 27126:2012 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification Data Limite: TC 45 DIS 27127:2012 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification Data Limite: TC 46 DIS 2789:2012 Information and documentation - International library statistics (Revision ISO 2789:2009) Data Limite: TC 48 FDIS 6556:2012 Laboratory glassware Filter flasks Data Limite: TC 54 FDIS 1342:2012 Oil of rosemary (Rosmarinus officinalis L.) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

153 Data Limite: TC 54 DIS 9235:2012 Aromatic natural raw materials Vocabulary Data Limite: TC 58 DIS 3807:2012 Gas cylinders Acetylene cylinders Basic requirements and type testing Data Limite: TC 58 DIS 5145:2012 Cylinder valve outlets for gases and gas mixtures Selection and dimensioning Data Limite: TC 58 ISO 7225:2005 /FDAM 1:2012 Gas cylinders Precautionary labels AMENDMENT 1 Data Limite: TC 58 DIS 10297:2012 Gas cylinders Cylinder valves Specification and type testing Data Limite: TC 58 DIS 11120:2012 Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design construction and testing Data Limite: TC 58 ISO :2001 /DAM 1:2012 Bouteilles à gaz Filetages parallèles pour le raccordement des robinets sur les bouteilles à gaz Partie 1: Spécifications AMENDEMENT 1 Data Limite: TC 59 DIS :2012 Building and civil engineering Vocabulary Part 1: General terms Data Limite: TC 61 FDIS :2012 Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties Data Limite: TC 61 FDIS 2561:2012 Plastics Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography Data Limite: TC 61 FDIS :2012 Plastics Smoke generation Part 2: Determination of optical density by a single-chamber test Data Limite: TC 61 FDIS :2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 1: Designation system and basis for specifications Data Limite: TC 61 FDIS 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame Data Limite: TC 61 DIS :2012 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height Data Limite: TC 61 FDIS :2012 Plastics Acquisition and presentation of comparable multipoint data Part 2: Thermal and processing properties Data Limite: TC 61 FDIS 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics Data Limite: TC 61 DIS 12856:2012 Plastic railway sleepers (railroad ties) Data Limite: TC 61 FDIS 13636:2012 Plastics Film and sheeting Non-oriented poly(ethylene terephthalate) (PET) sheets Data Limite: TC 61 FDIS :2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions Method by analysis of evolved carbon dioxide Part 1: General method Data Limite: TC 61 FDIS :2012 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 1: Designation system and basis for specifications Data Limite: TC 61 FDIS :2012 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties Data Limite: TC 61 DIS :2012 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance Data Limite: TC 61 DIS :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

154 Adhesives Test methods for isotropically electrically conducting adhesives Part 1: General test methods Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 2: Determination of electrical characteristics Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 3: Determination of heat transfer properties Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 5: Shear fatigue testing Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 6: Pendulum-type impact testing Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 7: Environmental test methods Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 8: Electrochemical-migration test methods Data Limite: TC 61 DIS :2012 Adhesives Test methods for isotropically electrically conducting adhesives Part 9: Determination of high-speed signal-transmission characteristics Data Limite: TC 61 DIS 30021:2012 Plastics Burning behaviour Intermediate-scale fireresistance testing of fibre-reinforced polymer composites Data Limite: TC 63 DIS 12818:2012 Glass packaging Standard tolerances for flaconnage Data Limite: TC 63 DIS 12821:2012 Glass packaging 26 H 180 crown finish Dimensions Data Limite: TC 63 DIS 12822:2012 Glass packaging 26 H 126 crown finish Dimensions Data Limite: TC 67 FDIS 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems Data Limite: TC 67 FDIS :2012 Petroleum and natural gas industries Completion fluides and materials Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions Data Limite: TC 67 DIS 14313:2012 Petroleum and natural gas industries Pipeline transportation systems Pipeline valves Data Limite: TC 67 DIS :2012 Petroleum, petrochemical and natural gas industries Cathodic protection of pipeline systems Part 1: On-land pipelines Data Limite: TC 67 FDIS :2012 Petroleum and natural gas industries Cathodic protection of pipeline transportation systems Part 2: Offshore pipelines Data Limite: TC 67 DIS 19900:2012 Petroleum and natural gas industries General requirements for offshore structures Data Limite: TC 67 ISO 19902:2007 /DAM 1:2012 Petroleum and natural gas industries Fixed steel offshore structures AMENDMENT 1 Data Limite: TC 67 DIS :2012 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 2: Single layer fusion-bonded epoxy coatings Data Limite: TC 69 FDIS :2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes Data Limite: TC 70 DIS :2012 Methods of test for full-flow lubricating oil filters for internal combustion engines Part 13: Static burst pressure test for composite pressure vessel materials Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

155 Data Limite: TC 70 DIS :2012 Methods of test for full-flow lubricating oil filters for internal combustion engines Part 15: Vibration fatigue test with composite materials Data Limite: TC 70 DIS 15619:2012 Reciprocating internal combustion engines Measurement method for exhaust silencers Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio Data Limite: TC 71 FDIS :2011 Environmental management for concrete and concrete structures Part 1: General principles Data Limite: TC 71 FDIS :2012 Grout for prestressing tendons Part 1: Basic requirements Data Limite: TC 71 FDIS :2012 Grout for prestressing tendons Part 2: Grouting procedures Data Limite: TC 71 FDIS :2012 Grout for prestressing tendons Part 3: Test methods Data Limite: TC 84 FDIS :2012 Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers Data Limite: TC 84 FDIS :2012 Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions Data Limite: TC 85 DIS 3925:2012 Unsealed radioactive substances Identification and documentation Data Limite: TC 85 FDIS :2012 Measurement of radioactivity in the environment Air: radon-222 Part 8: Methodologies for initial and additional investigations in buildings Data Limite: TC 85 DIS :2012 Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 2: Radiological protection Data Limite: TC 85 DIS 12799:2012 Nuclear energy Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets Inert gas extraction and conductivity detection method Data Limite: TC 85 DIS 15651:2012 Nuclear energy Determination of total hydrogen content in PuO2 and UO2 powders and UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets Inert gas extraction and conductivity detection method Data Limite: TC 85 DIS 15690:2012 Radiological protection Recommendations for dealing with discrepancies between personal dosimeter systems used in parallel Data Limite: TC 85 DIS 16117:2012 Nuclear criticality safety Estimation of the number of fissions of a postulated criticality accident Data Limite: TC 85 FDIS 16424:2012 Nuclear energy Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements Data Limite: TC 85 DIS 16966:2012 Nuclear energy Nuclear fuel technology Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors Data Limite: TC 85 DIS 51261:2012 Practice for calibration of routine dosimetry systems for radiation processing Data Limite: TC 85 DIS 51631:2012 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations Data Limite: TC 85 DIS 52116:2012 Practice for dosimetry for a self-contained dry-storage gammaray irradiator Data Limite: TC 86 FDIS :2012 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification and selection criteria Data Limite: TC 86 FDIS :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

156 Refrigerating systems and heat pumps Safety and environmental requirements Part 2: Design, construction, testing, marking and documentation Data Limite: TC 86 FDIS :2012 Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Data Limite: TC 86 FDIS :2012 Refrigerating systems and heat pumps Safety and environmental requirements Part 4: Operation, maintenance, repair and recovery Data Limite: TC 86 DIS 16345:2012 Water-cooling towers Testing and rating of thermal performance Data Limite: TC 87 DIS 16420:2012 Cork Cork stoppers for still wines Mechanical and physical specifications Data Limite: TC 87 DIS 17727:2012 Cork Cork stoppers for still wine Sampling plan for the quality control of cork stoppers Data Limite: TC 92 FDIS :2012 Fire resistance tests Elements of building construction Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces Data Limite: TC 92 DIS :2012 External fire exposure to roofs Part 2: Classification of roofs Data Limite: TC 94 DIS :2012 Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 1: Specification for products Data Limite: TC 94 DIS :2012 Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 2: Guidance for use Data Limite: TC 94 FDIS 13287:2012 Personal protective equipment Footwear Test method for slip resistance Data Limite: TC 94 DIS 13994:2012 Clothing for protection against liquid chemicals Determination of the resistance of protective clothing materials to penetration by liquids under pressure Data Limite: TC 94 ISO 16602:2007 /FDAM 1:2012 Protective clothing for protection against chemicals Classification, labelling and performance requirements AMENDMENT 1 Data Limite: TC 94 FDIS :2012 Respiratory protective devices Methods of test and test equipment Part 3: Determination of particle filter penetration Data Limite: TC 94 DIS 17249:2012 Safety footwear with resistance to chain saw cutting Data Limite: TC 94 FDIS :2012 Respiratory protective devices Performance requirements Part 3: Thread connection Data Limite: TC 94 DIS 20346:2012 Personal protective equipment Protective footwear Data Limite: TC 96 FDIS :2012 Cranes Vocabulary Part 2: Mobile cranes Data Limite: TC 96 FDIS :2012 Cranes Design principles for loads and load combinations Part 1: General Data Limite: TC 96 DIS 17440:2012 Cranes General Design Limit states and proof of competence of forged steel hooks Data Limite: TC 98 DIS 13033:2012 Seismic actions on nonstructural components for building applications Data Limite: TC 104 ISO 6346:1995 /FDAM 3:2012 Freight containers Coding, identification and marking Amendment 3 Data Limite: TC 105 DIS 16839:2012 Steel wire ropes Determination of the compliance characteristics of steel wire ropes subjected to lateral load Data Limite: TC 105 DIS 16841:2012 Steel wire ropes Pulling eyes for rope installation Types and minimum requirements Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

157 TC 106 FDIS 10323:2012 Dentistry Bore diameters for rotary instruments such as discs and wheels Data Limite: TC 106 FDIS 12836:2012 Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing the accuracy Data Limite: TC 106 FDIS 13078:2012 Dentistry Dental furnace Test method for temperature measurement with separate thermocouple Data Limite: TC 106 ISO :2005 /FDIS 1:2012 Dentistry Periodontal curettes, dental scalers and excavators Part 2: Curettes parodontales de type Gr AMENDMENT 1: Colour coding Data Limite: TC 106 FDIS 14457:2012 Dentistry Handpieces and motors Data Limite: TC 106 DIS 16498:2012 Dentistry Minimal dental implant data set for clinical use Data Limite: TC 106 DIS :2012 Dentistry Dental dam technique Part 1: Hole punch Data Limite: TC 106 DIS 17304:2012 Dentistry Polymerisation shrinkage: Method for determination of polymerisation shrinkage of polymer-based restorative materials Data Limite: TC 106 DIS 29022:2012 Dentistry Adhesion Notched-edge shear bond strength test Data Limite: TC 107 FDIS 14188:2012 Metallic and other inorganic coatings Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings Data Limite: TC 107 DIS 14920:2012 Thermal spraying Spraying and fusing of self-fluxing alloys Data Limite: TC 108 FDIS 13372:2012 Condition monitoring and diagnostics of machines Vocabulary Data Limite: TC 108 FDIS :2012 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 1: Requirements for assessment parties and the assessment process Data Limite: TC 108 FDIS :2012 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 3: Requirements for training bodies and the training process Data Limite: TC 108 FDIS :2012 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 5: Lubricant laboratory technician/analyst Data Limite: TC 108 DIS :2012 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 8: Ultrasound Data Limite: TC 110 DIS :2012 Industrial trucks Verification of stability Part 5:Single side-loading trucks Data Limite: TC 110 DIS :2012 Indutrial trucks Verification of stability Part 15: Counterbalanced trucks with articulated steering Data Limite: TC 112 DIS 2861:2012 Vacuum technology Dimensions of clamped-type quickrelease couplings Data Limite: TC 114 DIS 3764:2012 Timekeeping instruments Movements Types, dimensions and nomenclature Data Limite: TC 118 FDIS :2012 Hand-held non-electric power tools Safety requirements Part 3: Drills and tappers Data Limite: TC 118 FDIS :2012 Hand-held non-electric power tools Safety requirements Part 4:Non-rotary percussive power tools Data Limite: TC 118 FDIS :2012 Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners Data Limite: TC 118 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

158 FDIS :2012 Hand-held portable power tools Test methods for evaluation of vibration emission Part 12: Die grinders Data Limite: TC 119 FDIS 7625:2012 Sintered metal materials, excluding hardmetals Preparation of samples for chemical analysis for determination of carbon content Data Limite: TC 119 DIS 13517:2012 Metallic powders Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter) Data Limite: TC 121 DIS :2012 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets Data Limite: TC 121 FDIS :2012 Anaesthetic and respiratory equipment Conical connectors Part 2: Screw-threaded weight-bearing connectors Data Limite: TC 121 FDIS 5361:2012 Anaesthetic and respiratory equipment Tracheal tubes and connectors Data Limite: TC 121 DIS :2012 Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source Data Limite: TC 121 DIS 11197:2012 Medical supply units Data Limite: TC 121 DIS 16571:2012 Systems for evacuation of plume generated by medical devices Data Limite: TC 121 DIS 27427:2012 Anaesthetic and respiratory equipment Nebulizing systems and components Data Limite: TC 122 FDIS 3394:2012 Packaging Complete, filled transport packages and unit loads Dimensions of rigid rectangular packages Data Limite: TC 122 FDIS 3676:2012 Packaging Complete, filled transport packages and unit loads Unit load dimensions Data Limite: TC 122 FDIS 13127:2012 Packaging Child resistant packaging Mechanical test methods for reclosable child resistant packaging systems Data Limite: TC 122 DIS :2012 Packaging Numeric Codification of Contents for Electronic Inventories and Manifests of Household Goods and Personal Part 1: Messaging and coding of inventory numbers, locations and exceptions Data Limite: TC 123 DIS :2012 Plain bearings Thin-walled half bearings with or without flange Part 1: Tolerances, design features and methods of test Data Limite: TC 123 FDIS 4383:2012 Plain bearings Multilayer materials for thin-walled plain bearings Data Limite: TC 123 FDIS :2012 Plain bearings Hardness testing of bearing metals Part 1: Multilayer bearings materials Data Limite: TC 123 FDIS :2012 Plain bearings Metallic multilayer plain bearings Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm Data Limite: TC 123 FDIS :2012 Plain bearings Metallic multilayer plain bearings Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm Data Limite: TC 123 FDIS :2012 Plain bearings Testing of the tribological behaviour of bearing materials Part 1: Testing of bearing metals Data Limite: TC 123 FDIS :2012 Plain bearings Testing of the tribological behaviour of bearing materials Part 2: Testing of polymer-based bearing materials Data Limite: TC 126 DIS :2012 Cigarettes Determination of water in smoke condensates Part 2: Karl Fischer method Data Limite: TC 126 FDIS 20193:2012 Tobacco and tobacco products Determination of the width of the strands of cut tobacco Data Limite: TC 127 FDIS 6165:2012 Earth-moving machinery Basic types Identification and terms and definitions Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

159 Data Limite: TC 127 FDIS 10978:2012 Earth-moving machinery Sustainability Terminology, sustainability factors and reporting Data Limite: TC 127 FDIS :2012 Ophthalmic implants Intraocular lenses Part 1: Vocabulary Data Limite: TC 127 DIS :2012 Ophthalmic implants Intraocular lenses Part 7: Clinical investigations Data Limite: TC 127 FDIS 11980:2012 Ophthalmic optics Contact lenses and contact lens care products Guidance for clinical investigations Data Limite: TC 130 DIS :2012 Graphic technology Prepress digital data exchange Part 5: Scene-referred standard colour image data (RIMM/SCID) Data Limite: TC 130 DIS :2012 Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods Data Limite: TC 130 DIS :2012 Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes Data Limite: TC 130 DIS 14298:2012 Graphic technology Management of security printing processes Data Limite: TC 130 DIS 16759:2012 Technologie graphique Quantification et communication relatives au calcul de l'empreinte carbone des produits imprimés Data Limite: TC 131 DIS :2012 Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports Data Limite: TC 131 DIS :2012 Connections for general use and fluid power Ports and stud ends with ISO threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) Data Limite: TC 131 FDIS :2012 Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 Data Limite: TC 131 FDIS :2012 Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 Data Limite: TC 131 DIS :2012 Pneumatic fluid power Determination of flow-rate characteristics of components Part 3: Method for calculating steady-state flow-rate characteristics of assemblies Data Limite: TC 131 FDIS :2012 Hydraulic fluid power Electrically modulated hydraulic control valves Part 2: Test methods for three-port directional flow-control valves Data Limite: TC 132 DIS :2012 Non-destructive testing Penetrant testing Part 3: Reference test blocks Data Limite: TC 135 FDIS 2400:2012 Non-destructive testing Ultrasonic examination Specification for calibration block No. 1 Data Limite: TC 135 DIS :2012 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Data Limite: TC 135 FDIS 16809:2012 Non-destructive testing Ultrasonic thickness measurement Data Limite: TC 135 DIS 16946:2012 Non-destructive testing Ultrasonic testing Specification for step wedge calibration block Data Limite: TC 138 FDIS 9080:2012 Plastics piping and ducting systems Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

160 TC 138 DIS :2012 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 1: General Data Limite: TC 138 DIS :2012 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 3: Lining with close-fit pipes Data Limite: TC 138 FDIS :2012 Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 1: Butt fusion Data Limite: TC 138 FDIS :2012 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 1: General Data Limite: TC 138 FDIS :2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General Data Limite: TC 138 FDIS :2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes Data Limite: TC 138 FDIS :2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 3: Fittings Data Limite: TC 142 DIS :2012 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 1: Gas-phase air cleaning media Data Limite: TC 145 ISO 7001:2007 /DAM 1:2012 Graphical symbols Public information symbols AMENDMENT 1: Symbol PI CF 011: Internet café Data Limite: TC 145 ISO 7001:2007 /DAM 4:2012 Graphical symbols Public information symbols AMENDMENT 4: Symbol PI PF 036: Child health care centre Data Limite: TC 145 ISO 7001:2007 /DAM 5:2012 Graphical symbols Public information symbols AMENDMENT 5: Symbol PI PF 037: Library Data Limite: TC 145 ISO 7001:2007 /DAM 6:2012 Graphical symbols Public information symbols AMENDMENT 6: Symbol PI PF 038: Indoor play area Data Limite: TC 145 ISO 7001:2007 /DAM 7:2012 Graphical symbols Public information symbols AMENDMENT 7: Symbol PI PF 039: Packed lunch room Data Limite: TC 145 ISO 7001:2007 /DAM 10:2012 Graphical symbols Public information symbols AMENDMENT 10: Symbol PI PF 043: Dentist Data Limite: TC 145 ISO 7001:2007 /DAM 11:2012 Graphical symbols Public information symbols AMENDMENT 11: Symbol PI PF 044: Health care centre or doctor Data Limite: TC 145 ISO 7001:2007 /DAM 12:2012 Graphical symbols Public information symbols AMENDMENT 12: Symbol PI PF 045: Accessibility, limited walking capability Data Limite: TC 145 ISO 7001:2007 /DAM 13:2012 Graphical symbols Public information symbols AMENDMENT 13: Symbol PI PF 046: Accessibility, assistance dog Data Limite: TC 145 ISO 7001:2007 /DAM 14:2012 Graphical symbols Public information symbols AMENDMENT 14: Symbol PI PF 047: Accessibility, personal assistant available Data Limite: TC 145 ISO 7001:2007 /DAM 15:2012 Graphical symbols Public information symbols AMENDMENT 15: Symbol PI PF 048: Accessibility, hard of hearing Data Limite: TC 145 ISO 7001:2007 /DAM 16:2012 Graphical symbols Public information symbols AMENDMENT 16: Symbol PI PF 049: Accessibility, vision impaired Data Limite: TC 145 ISO 7001:2007 /DAM 17:2012 Graphical symbols Public information symbols AMENDMENT 17: Symbol PI PF 050: Accessibility, vegetarian food Data Limite: TC 145 ISO 7001:2007 /DAM 18:2012 Graphical symbols Public information symbols AMENDMENT 18: Symbol PI PF 051: Accessibility, blind or low vision Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

161 TC 145 ISO 7001:2007 /DAM 20:2012 Graphical symbols Public information symbols AMENDMENT 20: Symbol PI PF 053: Transportation centre Data Limite: TC 145 ISO 7001:2007 /DAM 21:2012 Graphical symbols Public information symbols AMENDMENT 21: Symbol PI PF 054: Museum Data Limite: TC 145 ISO 7001:2007 /DAM 22:2012 Graphical symbols Public information symbols AMENDMENT 22: Symbol PI SA 003: Indoor swimming pool Data Limite: TC 145 ISO 7001:2007 /DAM 23:2012 Graphical symbols Public information symbols AMENDMENT 23: Symbol PI SA 004: Sports hall Data Limite: TC 145 ISO 7001:2007 /DAM 24:2012 Graphical symbols Public information symbols AMENDMENT 24: Symbol PI TC 008: Natural area with public access Data Limite: TC 145 ISO 7001:2007 /DAM 25:2012 Graphical symbols Public information symbols AMENDMENT 25: Symbol PI TC 009: Hiking trail Data Limite: TC 145 ISO 7001:2007 /DAM 26:2012 Graphical symbols Public information symbols AMENDMENT 26: Symbol PI TF 022: Priority seats for elderly people Data Limite: TC 145 ISO 7001:2007 /DAM 27:2012 Graphical symbols Public information symbols AMENDMENT 27: Symbol PI TF 023: Priority seats for injured people Data Limite: TC 145 ISO 7001:2007 /DAM 28:2012 Graphical symbols Public information symbols AMENDMENT 28: Symbol PI TF 024: Priority seats for people with internal medical conditions Data Limite: TC 145 ISO 7001:2007 /DAM 29:2012 Graphical symbols Public information symbols AMENDMENT 29: Symbol PI TF 025: Priority seats for people with small children Data Limite: TC 145 ISO 7001:2007 /DAM 30:2012 Graphical symbols Public information symbols AMENDMENT 30: Symbol PI TF 026: Priority seats for expecting mothers Data Limite: TC 145 ISO 7001:2007 /DAM 31:2012 Graphical symbols Public information symbols AMENDMENT 31: Symbol PI PF 055: Priority access for elderly people Data Limite: TC 145 ISO 7001:2007 /DAM 32:2012 Graphical symbols Public information symbols AMENDMENT 32: Symbol PI PF 056: Priority access for injured people Data Limite: TC 145 ISO 7001:2007 /DAM 33:2012 Graphical symbols Public information symbols AMENDMENT 33: Symbol PI PF 057: Priority access for people with internal medical conditions Data Limite: TC 145 ISO 7001:2007 /DAM 34:2012 Graphical symbols Public information symbols AMENDMENT 34: Symbol PI PF 058: Priority access for people with small children Data Limite: TC 145 ISO 7001:2007 /DAM 35:2012 Graphical symbols Public information symbols AMENDMENT 35: Symbol PI PF 059: Priority access for expecting mothers Data Limite: TC 145 ISO 7001:2007 /DAM 36:2012 Graphical symbols Public information symbols AMENDMENT 36: Symbol PI PB 006: Dogs should be carried Data Limite: TC 145 ISO 7001:2007 /DAM 37:2012 Graphical symbols Public information symbols AMENDMENT 37: Symbol PI CF 014: Newsstand/News kiosk/newsagent Data Limite: TC 145 ISO 7001:2007 /DAM 40:2012 Graphical symbols Public information symbols AMENDMENT 40: Symbol PI TC 010: Location for campfires Data Limite: TC 145 ISO 7001:2007 /DAM 41:2012 Graphical symbols Public information symbols AMENDMENT 41: Symbol PI TC 011: Bird sanctuary Data Limite: TC 145 ISO 7001:2007 /DAM 42:2012 Graphical symbols Public information symbols AMENDMENT 42: Symbol PI TC 012: Wetland reserve Data Limite: TC 145 ISO 7001:2007 /DAM 43:2012 Graphical symbols Public information symbols AMENDMENT 43: Symbol PI TC 013: Hot spring or hot tub Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

162 TC 145 ISO 7001:2007 /DAM 44:2012 Graphical symbols Public information symbols AMENDMENT 44: Symbol PI TC 014: Audio tour Data Limite: TC 145 ISO 7001:2007 /DAM 45:2012 Graphical symbols Public information symbols AMENDMENT 45: Symbol PI TF 027: Airport bus Data Limite: TC 145 ISO 7001:2007 /DAM 46:2012 Graphical symbols Public information symbols AMENDMENT 46: Symbol PI PF 062: Communication in the specified language Data Limite: TC 145 ISO 7001:2007 /DAM 47:2012 Graphical symbols Public information symbols AMENDMENT 47: Symbol PI PF 063: Recycling - Aluminium cans Data Limite: TC 145 ISO 7001:2007 /DAM 48:2012 Graphical symbols Public information symbols AMENDMENT 48: Symbol PI PF 064: Recycling - Magnetic type of steel Data Limite: TC 145 ISO 7001:2007 /DAM 49:2012 Graphical symbols Public information symbols AMENDMENT 49: Symbol PI PF 065: Recycling - Glass Data Limite: TC 145 ISO 7001:2007 /DAM 50:2012 Graphical symbols Public information symbols AMENDMENT 50: Symbol PI PF 066: Recycling Data Limite: TC 145 ISO 7001:2007 /DAM 51:2012 Graphical symbols Public information symbols AMENDMENT 51: Symbol PI PB 007: Take off your shoes Data Limite: TC 145 ISO 7010:2011 /DAM 119:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 119: Safety sign E027: Medical grab bag Data Limite: TC 145 ISO 7010:2011 /DAM 120:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 120: Safety sign E028: Oxygen resuscitator Data Limite: TC 145 ISO 7010:2011 /DAM 121:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 121: Safety sign E029: Emergency escape breathing device Data Limite: TC 145 ISO 7010:2011 /DAM 122:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 122: Safety sign E030: Shipboard safety equipment Data Limite: TC 145 ISO 7010:2011 /DAM 123:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 123: Safety sign E031: Shipboard general alarm Data Limite: TC 145 ISO 7010:2011 /DAM 124:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 124: Safety sign E032: Shipboard assembly station Data Limite: TC 145 ISO 7010:2011 /DAM 125:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 125: Safety sign E033: Door slides right to open Data Limite: TC 145 ISO 7010:2011 /DAM 126:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 126: Safety sign E034: Door slides left to open Data Limite: TC 145 ISO 7010:2011 /DAM 128:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 128: Safety sign E036: Lifeboat Data Limite: TC 145 ISO 7010:2011 /DAM 129:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 129: Safety sign E037: Rescue boat Data Limite: TC 145 ISO 7010:2011 /DAM 130:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 130: Safety sign E038: Liferaft Data Limite: TC 145 ISO 7010:2011 /DAM 131:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 131: Safety sign E039: Davit-launched liferaft Data Limite: TC 145 ISO 7010:2011 /DAM 132:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 132: Safety sign E040: Lifebuoy Data Limite: TC 145 ISO 7010:2011 /DAM 133:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 133: Safety sign Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

163 E041: Lifebuoy with line Data Limite: TC 145 ISO 7010:2011 /DAM 134:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 134: Safety sign E042: Lifebuoy with light Data Limite: TC 145 ISO 7010:2011 /DAM 135:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 135: Safety sign E043: Lifebuoy with line and light Data Limite: TC 145 ISO 7010:2011 /DAM 136:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 136: Safety sign E044: Lifejacket Data Limite: TC 145 ISO 7010:2011 /DAM 137:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 137: Safety sign E045: Child's lifejacket Data Limite: TC 145 ISO 7010:2011 /DAM 138:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 138: Safety sign E046: Infant's lifejacket Data Limite: TC 145 ISO 7010:2011 /DAM 139:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 139: Safety sign E047: Search and rescue transponder Data Limite: TC 145 ISO 7010:2011 /DAM 140:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 140: Safety sign E048: Survival craft distress signal Data Limite: TC 145 ISO 7010:2011 /DAM 141:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 141: Safety sign E049: Rocket parachute flare Data Limite: TC 145 ISO 7010:2011 /DAM 142:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 142: Safety sign E050: Line-throwing appliance Data Limite: TC 145 ISO 7010:2011 /DAM 143:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 143: Safety sign E051: Two-way VHF radiotelephone apparatus Data Limite: TC 145 ISO 7010:2011 /DAM 144:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 144: Safety sign E052: Emergency position indicating radio beacon Data Limite: TC 145 ISO 7010:2011 /DAM 145:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 145: Safety sign E053: Embarkation ladder Data Limite: TC 145 ISO 7010:2011 /DAM 146:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 146: Safety sign E054: Marine evacuation slide Data Limite: TC 145 ISO 7010:2011 /DAM 147:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 147: Safety sign E055: Marine evacuation chute Data Limite: TC 145 ISO 7010:2011 /DAM 148:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 148: Safety sign E056: Survival clothing Data Limite: TC 145 ISO 7010:2011 /DAM 149:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 149: Safety sign F008: Fixed fire extinguishing battery Data Limite: TC 145 ISO 7010:2011 /DAM 150:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 150: Safety sign F009: Wheeled fire extinguisher Data Limite: TC 145 ISO 7010:2011 /DAM 151:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 151: Safety sign F010: Portable foam applicator unit Data Limite: TC 145 ISO 7010:2011 /DAM 152:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 152: Safety sign F011: Water fog applicator Data Limite: TC 145 ISO 7010:2011 /DAM 153:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 153: Safety sign F012: Fixed fire extinguishing installation Data Limite: TC 145 ISO 7010:2011 /DAM 154:2012 Graphical symbols Safety colours and safety signs - Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

164 Registered safety signs AMENDMENT 154: Safety sign F013: Fixed fire extinguishing bottle Data Limite: TC 145 ISO 7010:2011 /DAM 155:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 155: Safety sign F014: Remote release station Data Limite: TC 145 ISO 7010:2011 /DAM 156:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 156: Safety sign F015: Fire monitor Data Limite: TC 145 ISO 7010:2011 /DAM 157:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 157: Saferty sign M037: Close and secure hatches in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 158:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 158: Safety sign M038: Start engine in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 159:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 159: Safety sign M039: Lower lifeboat to the water in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 160:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 160: Safety sign M040: Lower liferaft to the water in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 161:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 161: Safety sign M041: Lower rescue boat to the water in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 162:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 162: Safety sign M042: Release falls in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 163:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 163: Safety sign M043: Start water spray in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 164:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 164: Safety sign M044: Start air supply in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 165:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 165: Safety sign M045: Release lifeboat gripes in launch sequence Data Limite: TC 145 ISO 7010:2011 /DAM 166:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 166: Safety sign E057: Door opens by pulling on the left-hand side Data Limite: TC 145 ISO 7010:2011 /DAM 167:2012 Graphical symbols Safety colours and safety signs - Registered safety signs AMENDMENT 167: Safety sign E058: Door opens by pulling on the right-hand side Data Limite: TC 145 DIS :2012 Graphical symbols Test methods Part 1: Method for testing comprehensibility Data Limite: TC 146 DIS :2012 Interior air of road vehicles Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Static chamber method Data Limite: TC 146 DIS 13137:2012 Workplace atmospheres Pumps for personal sampling of chemical and biological agents Requirements and test methods Data Limite: TC 146 FDIS 13199:2012 Stationary source emissions Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes Nondispersive infrared analyser equipped with catalytic converter Data Limite: TC 146 DIS :2012 Indoor air Part 21: Detection and enumeration of moulds - Sampling from materials Data Limite: TC 146 DIS :2012 Indoor air Part 29: Test methods for VOC detectors Data Limite: TC 146 DIS :2012 Indoor air Part 30: Sensory testing of indoor air Data Limite: TC 146 DIS :2012 Indoor air Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds Phosphoric acid ester Data Limite: TC 146 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

165 DIS :2012 Indoor air Part 32: Investigation of buildings for pollutants and other injurious factors - Inspections Data Limite: TC 146 DIS 17091:2012 Workplace air Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide Method by measurement of corresponding cations by suppressed ion chromatography Data Limite: TC 146 DIS 25597:2012 Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution Data Limite: TC 147 FDIS :2012 Water quality Sampling Part 3: Preservation and handling of water samples Data Limite: TC 147 FDIS 6341:2012 Water quality Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) Acute toxicity test Data Limite: TC 150 FDIS :2012 Implants for surgery Calcium phosphates Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes Data Limite: TC 150 DIS :2012 Implants for surgery Plasma sprayed coatings of unalloyed titanium Part 1: General requirements Data Limite: TC 150 DIS 15309:2012 Implants for surgery Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices Data Limite: TC 150 ISO 21536:2007 /DAM 1:2012 Non-active surgical implants Joint replacement implants Specific requirements for knee-joint replacement implants AMENDMENT 1 Data Limite: TC 150 FDIS 23317:2012 Implants for surgery In vitro evaluation for apatite-forming ability of implant materials Data Limite: TC 150 FDIS :2012 Cardiovascular implants Endovascular devices Part 2: Vascular stents Data Limite: TC 154 DIS 17369:2012 Statistical data and metadata exchange (SDMX) Data Limite: TC 157 DIS 4074:2012 Natural rubber latex male condoms Requirements and test methods Data Limite: TC 159 FDIS 15535:2012 General requirements for establishing anthropometric databases Data Limite: TC 163 FDIS 12569:2012 Thermal performance of buildings and materials Determination of specific airflow rate in buildings Tracer gas dilution method Data Limite: TC 163 FDIS :2012 Thermal insulation products Exterior insulating systems for foundations Part 1: Material specification Data Limite: TC 163 FDIS 12631:2012 Thermal performance of curtain walling Calculation of thermal transmittance Data Limite: TC 163 DIS 15758:2012 Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe insulation systems Data Limite: TC 164 DIS :2012 Metallic materials Fatigue testing - Variable amplitude fatigue testing Part 1: General principles, test method and reporting requirements Data Limite: TC 164 DIS :2012 Metallic materials Fatigue testing - Variable amplitude fatigue testing Part 2: Cycle counting and related data reduction methods Data Limite: TC 164 ISO 12570:2000 /DAM 1:2012 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature AMENDMENT 1 Data Limite: TC 164 DIS :2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method Data Limite: TC 164 DIS :2012 Metallic materials Instrumented indentation test for Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

166 hardness and materials parameters Part 2: Verification and calibration of testing machines Data Limite: TC 164 DIS :2012 Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks Data Limite: TC 165 DIS 16507:2012 Timber structures Uniform, concentrated static and concentrated impact loads on wood-based roof and floor panel assemblies Test methods Data Limite: TC 171 DIS :2012 Document management - Electronic document file format for long-term preservation Part 3: Use of ISO with support for embedded files (PDF/A-3) Data Limite: TC 171 DIS :2012 Document management - Portable document format Part 2: PDF 2.0 Data Limite: TC 172 DIS :2012 Endoscopes Medical endoscopes and endotherapy devices Part 1: General requirements Data Limite: TC 172 DIS :2012 Ophthalmic optics Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods Data Limite: TC 172 FDIS 9334:2012 Optics and photonics Optical transfer function Definitions and mathematical relationships Data Limite: TC 172 FDIS 9335:2012 Optics and photonics Optical transfer function Principles and procedures of measurement Data Limite: TC 172 FDIS 9394:2012 Ophthalmic optics Contact lenses and contact lens care products Determination of biocompatibility by ocular study with rabbit eyes Data Limite: TC 172 ISO :2007 /DAM 1:2012 Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces AMENDMENT 1 Data Limite: TC 172 FDIS 10341:2012 Ophthalmic instruments Refractor heads Data Limite: TC 172 FDIS :2011 Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 2: Commercial information Data Limite: TC 172 FDIS :2011 Ophthalmic optics Spectacle frames and sunglasses electronic catalogue and identification Part 3: Technical information Data Limite: TC 172 DIS :2012 Ophthalmic implants Intraocular lenses Part 2: Optical properties and test methods Data Limite: TC 172 ISO :2008 /pra 1:2012 Ophthalmic implants Intraocular lenses Part 4: Labelling and information AMENDMENT 1 Data Limite: TC 172 FDIS :2012 Ophthalmic optics Contact lenses Part 2: Tolerances Data Limite: TC 172 FDIS 22665:2012 Ophthalmic optics and instruments Instruments to measure axial distances in the eye Data Limite: TC 173 FDIS :2012 Wheelchairs Part 28: Requirements and test methods for stairclimbing devices Data Limite: TC 173 FDIS :2012 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test methods for all systems Data Limite: TC 176 FDIS 10004:2012 Quality management Customer satisfaction Guidelines for monitoring and measuring Data Limite: TC 176 DIS 10008:2012 Quality Management Customer satisfaction Guidelines for business-to-consumer electronic commerce transactions Data Limite: TC 176 FDIS 10018:2012 Quality management Guidelines on people involvement and competence Data Limite: TC 176 DIS 17582:2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

167 Quality management systems for electoral bodies Requirements Data Limite: TC 178 DIS :2012 Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) Data Limite: TC 178 FDIS :2012 Energy performance of lifts, escalators and moving walks Part 1: Energy measurement and verification Data Limite: TC 180 DIS 9806:2012 Solar energy Solar thermal collectors Test methods Data Limite: TC 181 FDIS :2012 Safety of toys Part 1: Safety aspects related to mechanical and physical properties Data Limite: TC 182 FDIS :2012 Geotechnical investigation and testing Field testing Part 4: Ménard pressuremeter test Data Limite: TC 182 FDIS :2012 Geotechnical investigation and testing Field testing Part 5: Flexible dilatometer test Data Limite: TC 182 FDIS :2012 Geotechnical investigation and testing Field testing Part 7: Borehole jack test Data Limite: TC 184 DIS 16739:2012 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries Data Limite: TC 188 DIS 7840:2012 Small craft Fire-resistant fuel hoses Data Limite: TC 188 DIS 8469:2012 Small craft Non-fire-resistant fuel hoses Data Limite: TC 188 DIS 10088:2012 Small craft Permanently installed fuel systems Data Limite: TC 188 FDIS 13297:2012 Small craft Electrical systems Alternating current installations Data Limite: TC 188 FDIS :2012 Immersion suits Part 1: Constant wear suits, requirements including safety Data Limite: TC 188 FDIS :2012 Immersion suits Part 2: Abandonment suits, requirements including safety Data Limite: TC 188 FDIS :2012 Immersion suits Part 3: Test methods Data Limite: TC 188 ISO 16147:2002 /DAM 1:2012 Small craft Inboard diesel engines Engine-mounted fuel and electrical components AMENDMENT 1 Data Limite: TC 188 FDIS 21487:2012 Small craft Permanently installed petrol and diesel fuel tanks Data Limite: TC 188 FDIS 25197:2012 Small craft Electrical/electronic control system for steering, shift and throttle Data Limite: TC 190 DIS 11267:2012 Soil quality Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants Data Limite: TC 190 FDIS :2012 Soil quality Effects of pollutants on earthworms Part 1: Determination of acute toxicity to Eisenia fetida/eisenia andrei Data Limite: TC 190 FDIS :2012 Soil quality Effects of pollutants on earthworms Part 2: Determination of effects on reproduction to Eisenia fetida/eisenia andrei Data Limite: TC 190 DIS 13859:2012 Soil quality Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Data Limite: TC 190 DIS 13876:2012 Soil quality Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) Data Limite: TC 190 DIS 13913:2012 Soil quality Determination of selected phthalates using capillary gas chromatography with mass spectrometric Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

168 detection (GC/MS) Data Limite: TC 190 DIS 16387:2012 Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction Data Limite: TC 190 DIS 16729:2012 Soil quality Digestion of nitric acid soluble fractions of elements Data Limite: TC 190 FDIS 17155:2012 Soil quality Determination of abundance and activity of soil microflora using respiration curves Data Limite: TC 190 DIS 28258:2012 Soil quality Digital exchange of soil-related data Data Limite: TC 190 DIS 29200:2012 Soil quality Assessment of genotoxic effects on higher plants Vicia faba micronucleus test Data Limite: TC 193 DIS :2012 Natural gas Determination of composition and associated uncertainty by gas chromatography Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons Data Limite: TC 193 FDIS 10723:2012 Natural gas Performance evaluation for analytical systems Data Limite: TC 193 DIS 14532:2012 Natural gas Vocabulary Data Limite: TC 197 DIS :2012 Hydrogen fuel Product specification Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances Data Limite: TC 198 ISO :2006 /DAM 1:2012 Sterilization of health care products - Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices Data Limite: TC 198 DIS :2012 Sterilization of health care products Chemical indicators Part 1: General requirements Data Limite: TC 198 ISO :2005 /DAM 1:2012 Aseptic processing of health care products Part 6: Isolator systems AMENDMENT 1 Data Limite: TC 198 ISO :2006 /DAM 1:2012 Washer-disinfectors Part 1: General requirements, terms and definitions and tests AMENDMENT 1 Data Limite: TC 199 FDIS :2012 Safety of machinery Safety-related parts of control systems Part 2: Validation Data Limite: TC 199 DIS :2012 Safety of machinery Pressure-sensitive protective device Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices Data Limite: TC 201 DIS 16531:2012 Surface chemical analysis Depth profiling Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS Data Limite: TC 202 DIS 15932:2012 Microbeam analysis Analytical electron microscopy Vocabulary Data Limite: TC 204 DIS :2012 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 2: Common platform parameters using CALM Data Limite: TC 204 DIS :2012 Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 3: Requirements, 'Certification authority' approval procedures, and enforcement provisions for the providers of regulated services Data Limite: TC 204 DIS :2012 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 5: Generic vehicle information Data Limite: TC 204 DIS :2012 Intelligent transport systems Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Part 7: Other applications Data Limite: TC 204 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

169 DIS :2012 Intelligent transport systems Communications access for land mobiles (CALM) - ITS station management Part 1: Local management Data Limite: TC 204 DIS :2012 Intelligent transport systems Communications access for land mobiles (CALM) - ITS station management Part 3: Service access points Data Limite: TC 204 FDIS :2012 Intelligent transport systems Communications access for land mobiles (CALM) - ITS station management Part 4: Station-internal management communications Data Limite: TC 204 DIS :2012 Intelligent transport systems Communications access for land mobiles (CALM) - ITS station management Part 5: Fast service advertisement protocol (FSAP) Data Limite: TC 204 DIS :2012 Intelligent transport systems Communication access for land mobiles (CALM) - Non-IP networking Part 1: Fast networking & transport layer protocol (FNTP) Data Limite: TC 204 DIS :2012 Intelligent transport systems Communication access for land mobiles (CALM) - Non-IP networking Part 2: Legacy system support Data Limite: TC 205 FDIS :2012 Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 6: Control Data Limite: TC 205 FDIS 13153:2012 Framework of the design process for energy-saving single-family residential and small commercial buildings with the energy consumption ratio as a criterion Data Limite: TC 205 DIS :2012 Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 1: Design and dimensioning Data Limite: TC 205 DIS :2012 Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 2: Energy calculation Data Limite: TC 206 DIS 14544:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature Determination of compression properties Data Limite: TC 206 DIS 14574:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Mechanical properties of ceramic composites at high temperature Determination of tensile properties Data Limite: TC 206 FDIS 14603:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for open-hole tension of continuous fibre-reinforced ceramic matrix composites at room temperature Data Limite: TC 206 DIS 14604:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) Methods of test for ceramic coatings Determination of fracture strain Data Limite: TC 206 DIS 14605:2012 Fine Ceramics (Advanced ceramics, advanced technical ceramics) Light source for testing semiconducting photocatalytic materials used under indoor lighting environment Data Limite: TC 211 DIS :2012 Geographic information Reference model Part 1: Fundamentals Data Limite: TC 211 FDIS 19117:2012 Geographic information Portrayal Data Limite: TC 211 FDIS 19152:2012 Geographic information Land Administration Domain Model (LADM) Data Limite: TC 212 FDIS 15189:2012 Medical laboratories Requirements for quality and competence Data Limite: TC 213 DIS 2692:2012 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Data Limite: TC 213 ISO 3040:2009 /DAM 1:2012 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones AMENDMENT 1 Data Limite: TC 213 DIS :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

170 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMS) Part 10: Laser trackers for measuring point-to-point distances Data Limite: TC 213 ISO :2010 /DAM 1:2012 Geometrical product specifications (GPS) Dimensional tolerancing Part 1: Linear sizes AMENDMENT 1 Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 20: Linear profile filters: Basic concepts Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 22: Linear profile filters: Spline filters Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 40: Morphological profile filters: Basic concepts Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques Data Limite: TC 213 DIS :2012 Geometrical product specifications (GPS) Filtration Part 71: Robust areal filters: Gaussian regression filters Data Limite: TC 213 FDIS :2012 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities Data Limite: TC 213 FDIS :2012 Geometrical product specifications (GPS) Surface texture: Areal Part 71: Software measurement standards Data Limite: TC 214 DIS 18878:2012 Mobile elevating work platforms Operator (driver) training Data Limite: TC 215 FDIS 1828:2012 Health informatics Categorial structure for classifications and coding systems of surgical procedures Data Limite: TC 215 DIS 10781:2012 Electronic Health Record-System Functional Model, Release 2.0 (EHR FM) Data Limite: TC 215 FDIS :2012 Health informatics Personal health device communication Part 10420: Device specialization - Body composition analyzer Data Limite: TC 215 FDIS :2012 Health informatics Personal health device communication Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) Data Limite: TC 215 FDIS :2012 Health informatics Personal health device communication Part 10472: Device specialization - Medication monitor Data Limite: TC 215 FDIS :2012 Health informatics Point-of-care medical device communication Part 30400: Interface profile - Cabled Ethernet Data Limite: TC 215 FDIS 13119:2012 Health informatics Clinical knowledge resources Metadata Data Limite: TC 215 DIS 18104:2012 Health informatics Categorical structures for representation of nursing diagnoses and nursing actions in terminological systems Data Limite: TC 215 DIS 20301:2012 Health informatics Health cards General characteristics Data Limite: TC 215 DIS 21731:2012 Health informatics HL7 version 3 - Reference information model Release 1 Data Limite: TC 216 FDIS 16177:2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

171 Footwear Resistance to crack initiation and growth Belt flex method Data Limite: TC 219 DIS 17984:2012 Machine-made textile floor coverings Determination of dimensional changes after exposure to heat and/or water Data Limite: TC 219 ISO 24342:2007 /FDAM 1:2012 Resilient and textile floor-coverings Determination of side length, edge straightness and squareness of tiles AMENDMENT 1 Data Limite: TC 223 DIS 22398:2012 Societal security Guidelines for exercises and testing Data Limite: TC 228 FDIS 13293:2012 Recreational diving services Requirements for gas blender training programmes Data Limite: TC 228 DIS 14785:2012 Tourist information offices - Tourist information and reception services - Requirements Data Limite: TC 236 FDIS 21500:2012 Guidance on project management Data Limite: TC TMB DIS :2012 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirements Data Limite: TC TMB DIS :2012 Explosive atmospheres Part 37:Non-electrical equipment for use in explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

172 9.2 Comités Técnicos da ISO Lista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aos quais não existe ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos se encontram disponíveis para consulta no IPQ ISO/TC 4 Rolling bearings ISO/TC 12 Quantities, units, symbols, conversion factors ISO/TC 14 Shafts for machinery and accessories ISO/TC 19 Preferred numbers ISO/TC 20 Aircraft and space vehicles ISO/TC 24 Sieves, sieving and other sizing methods ISO/TC 25 Cast iron and pig iron Manganese and chromium ores ISO/TC 67 Materials, equipment and offshore structures for petroleum and natural gas industries ISO/TC 70 Internal combustion engines ISO/TC 81 Common names for pesticides and other agrochemicals ISO/TC 83 Sports and recreation equipment ISO/TC 85 Nuclear energy ISO/TC 86 Refrigeration ISO/TC 36 Cinematography ISO/TC 37 Terminology (principles and coordination) ISO/TC 41 Pulleys and belts (including veebelts) ISO/TC 42 Photography ISO/TC 47 Chemistry ISO/TC 48 Laboratory glassware and related apparatus ISO/TC 57 Metrology and properties of surfaces ISO/TC 59 Building construction ISO/TC 60 Gears ISO/TC 65 ISO/TC 100 Chains and chain wheels for power transmission and conveyors ISO/TC 101 Continuous mechanical handling equipment ISO/TC 102 Iron ores ISO/TC 110 Industrial trucks ISO/TC 112 Vacuum technology ISO/TC 113 Hydrometric determinations ISO/TC 114 Horology ISO/TC 115 Pumps ISO/TC 116 Space heating appliances Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

173 ISO/TC 117 Industrial fans ISO/TC 118 Compressors, pneumatic tools and pneumatic machines ISO/TC 119 Powder metallurgy ISO/TC 120 Leather ISO/TC 123 Plain bearings ISO/TC 127 Earth-moving machinery ISO/TC 131 Fluid power systems ISO/TC 132 Ferroalloys Technical systems and aids for disabled or handicapped persons ISO/TC 174 Jewellery ISO/TC 175 Fluorspar ISO/TC 177 Caravans ISO/TC 179 Masonry ISO/TC 182 Geotechnics ISO/TC 183 Copper, lead and zinc ores and concentrates ISO/TC 184 Industrial automation systems and integration ISO/TC 185 Safety devices for protection against excessive pressure ISO/TC 137 Sizing system, designations and marking for boots and shoes ISO/TC 153 Valves ISO/TC 154 Documents and data elements in administration, commerce and industry ISO/TC 155 Nickel and nickel alloys ISO/TC 163 Thermal insulation ISO/TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food ISO/TC 167 Steel and aluminium structures ISO/TC 170 Surgical instruments ISO/TC 173 ISO/TC 190 Soil quality ISO/TC 191 Humane animal (mammal) traps ISO/TC 192 Gas turbines ISO/TC 195 Building construction machinery and equipment ISO/TC 197 Hydrogen energy technologies ISO/TC 202 Microbeam analysis ISO/TC 203 Technical energy systems ISO/TC 204 Transport information and control systems ISO/TC 205 Building environmental design Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

174 ISO/TC 206 Fine ceramics ISO/TC 207 Management environnemental ISO/TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines) Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

175 10. Projetos de normas e propostas de estudo de novas normas da Comissão Eletrotécnica Internacional (IEC) Os projetos de normas e propostas de estudo de novas normas estão organizadas por Comités Técnicos Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. SC 17B IEC :2005 /CDV A1:2012 Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment Data Limite: SC 17A FDIS :2012 Industrial systems, installations and equipment and industrial products - Designation of signals SC 17B CDV :2012 Low-voltage switchgear and controlgear Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors Data Limite: SC 17D FDIS :2012 Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites Data Limite: SC 17A CDV :2012 High voltage switchgear and controlgear Part 4 - Handling procedures for sulphur hexafluoride (SF6) SC 17A IEC :2008 /FDIS A1:2012 Industrial systems, installations and equipment and industrial products - Designation of signals Data Limite: SC 17A FDIS :2012 High-voltage switchgear and controlgear Part 101: Synthetic testing SC 17A FDIS :2012 High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kv up to and including 52 kv SC 17A IEC :2008 /CDV A1:2012 High-voltage switchgear and controlgear Part 109: Alternating current series capacitor by-pass switches Data Limite: SC 17A FDIS :2012 High-voltage switchgear and controlgear Part 110: Inductive load switching Data Limite: SC 17A CDV :2012 High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines SC 17C CDV :2012 High-voltage switchgear and controlgear Part 201: AC solid-insulated enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv Data Limite: SC 17C CDV :2012 High-voltage switchgear and controlgear Part 202: High-voltage/low-voltage prefabricated substation Data Limite: SC 17B CDV :2012 Low-voltage switchgear and controlgear enclosed equipment Part 1: Enclosed switch outside the scope of IEC for various applications, to provide isolation of electrical equipment during repair and maintenance work Data Limite: SC 17A FDIS :2012 High-voltage switchgear and controlgear Part : Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers SC 21A CDV :2012 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells Part 1: Nickel-cadmium Data Limite: SC 22H CDV :2012 Uninterruptible power systems (UPS) Part 4: Environmental aspects - requirements and reporting Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

176 SC 23B IEC :2002 /FDIS A2:2012 Plugs and socket-outlets for household and similar purposes Part 1: General requirements Data Limite: SC 23A IEC :2008 /CDV A1:2012 Conduit systems for cable management Part 1: General requirements Data Limite: SC 31J CDV :2012 Explosive atmospheres Part 14: Electrical installations design, selection and erection Data Limite: SC 31J CDV :2012 Explosive atmospheres Part 17: Electrical installations inspection and maintenance Data Limite: SC 31M CDV :2012 Explosive atmospheres Part 36: Non-electrical equipment for use in explosive atmospheres - Basic method and requirements Data Limite: SC 31M CDV :2012 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres - Non electrical type of protection constructional safety ""ch"", control of ignition source ""bh"", liquid immersion ""kh"" Data Limite: SC 31M CDV :2012 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines Data Limite: SC 32C CDV :2012 Miniature fuses Part 7: Miniature fuse-links for special applications SC 32B CDV :2012 Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K SC 32B IEC :2010 /CDV A1:2012 Low-voltage fuses Part 3 - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F SC 32A CDV 60549:2012 High-voltage fuses for the external protection of shunt capacitors Data Limite: SC 34B IEC :1969 /FDIS A48:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps Data Limite: SC 34B IEC :1969 /FDIS A45:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders Data Limite: SC 34B IEC :1969 /FDIS A46:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges Data Limite: SC 34A IEC 60081:1997 /CDV A5:2012 Double-capped fluorescent lamps - Performance specifications Data Limite: SC 34D CDV :2012 Luminaires Part 1: General requirements and tests Data Limite: SC 34D CDV :2012 Luminaires Part 2-8: Particular requirements - Handlamps Data Limite: SC 34D CDV :2012 Luminaires Part 2-22: Particular requirements - Luminaires for emergency lighting Data Limite: SC 34A IEC 61231:2010 /CDV A1:2012 International lamp coding system (ILCOS) Data Limite: SC 34C IEC :2007 /FDIS A2:2012 Lamp controlgear Part 1: General and safety requirements Data Limite: SC 34C FDIS :2012 Lamp controlgear Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) Data Limite: SC 34C CDV :2012 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules Data Limite: SC 34A Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

177 IEC 62031:2008 /FDIS A1:2012 LED modules for general lighting - Safety specifications SC 34A IEC 62035:1999 /CDV A3:2012 Discharge lamps (excluding fluorescent lamps) - Safety specifications Data Limite: SC 34C CDV :2012 Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear Data Limite: SC 34C CDV :2012 Energy performance of lamp controlgear Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear Data Limite: SC 34A CDV :2012 LED - Binning Part 1: General requirements and white grid Data Limite: SC 34A PAS :2012 Cold Cathode Fluorescent Lamps Part 1: Safety Specifications Data Limite: SC 34A PAS :2012 Cold Cathode Fluorescent Lamps Part 2: Performance Specifications Data Limite: SC 45B FDIS 62755:2012 Radiation protection instrumentation - Data format for radiation instruments used in the detection of illicit trafficking of radioactive materials Data Limite: SC 45A FDIS :2012 Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 3: Elongation at break Data Limite: SC 46F CDV :2012 Radio frequency connectors Part 1: Generic specification - General requirements and measuring methods Data Limite: SC 46A FDIS :2012 Coaxial Communication Cables Part 1-119: Electrical test methods - RF power rating SC 46A FDIS :2012 Coaxial communication cables Part 5: Sectional specification for CATV trunk and distribution cables SC 46A FDIS :2012 Coaxial communication cables Part 5-1: Blank detail specification for CATV trunk and distribution cables SC 46A FDIS :2012 Coaxial communication cables Part 8-2: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 34A PAS :2012 External Electrode Fluorescent Lamps Part 1: Safety Specifications Data Limite: SC 34A PAS :2012 External Electrode Fluorescent Lamps Part 2: Performance Specifications Data Limite: SC 45A FDIS 62646:2012 Nuclear power plants - Control rooms - Computer based procedures SC 45B CDV 62709:2012 Radiation protection instrumentation - Measuring the imaging performance of X-ray systems for security screening of humans Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-3: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-4: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-5: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-6: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

178 SC 46A FDIS :2012 Coaxial communication cables Part 8-7: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-8: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 46A FDIS :2012 Coaxial communication cables Part 8-9: Detail specification for type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation Data Limite: SC 47C IEC :2007 /CDV A1:2012 Semiconductor devices - Discrete devices Part 5-5: Optoelectronic devices - Photocouplers Data Limite: SC 47F CDV :2012 Semiconductor devices - Micro-electromechanical devices Part 18: Bend testing methods of thin film materials Data Limite: SC 47A CDV :2012 Integrated circuits - Measurement of impulse immunity Part 3: Non-synchronous transient injection method Data Limite: SC 48B IEC :2006 /CDV A1:2012 Solderless connections Part 2: Crimped connections - General requirements, test methods and practical guidance Data Limite: SC 48B CDV :2012 Connectors for electronic equipment - Product requirements Part 2-109: Circular connectors - Detail specification for connectors M 12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz Data Limite: SC 48D CDV :2012 Mechanical structures for electronic equipment -Tests for IEC and IEC Part 3: Electromagnetic shielding performance tests for cabinets and subracks SC 59D FDIS 62512:2012 Electric clothes washer-dryers for household use - Methods for mesuring the performance SC 62A CDV :2012 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests Data Limite: SC 62A IEC :2010 /CDV A1:2012 Medical electrical equipment Part 1-6: General requirements for basic safety and essentialperformance - Collateral Standard: General requirement for basic safety and essential performance - Collateral standard: Usability Data Limite: SC 62A IEC :2006 /FDIS A1:2012 Medical electrical equipment Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems Data Limite: SC 62D FDIS :2012 Medical electrical equipment Part 2-24: Particular requirements for basic safety and essential performance of infusion pumps and controller Data Limite: SC 62B IEC :2010 /CDV A1:2012 Medical electrical equipment Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis Data Limite: SC 62B FDIS :2012 Medical electrical equipment Part 2-63:Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment SC 62B FDIS :2012 Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment SC 62B CDV :2012 Protective devices against diagnostic medical X-Radiation Part 1: Determination of attenuation properties of materials (Proposed Horizontal Standards) Data Limite: SC 62B CDV :2012 Protective devices against diagnostic medical X-Radiation Part 2: Translucent protective plates (Proposed Horizontal Standards) Data Limite: SC 62B CDV :2012 Protective devices against diagnostics medical X-Radiation Part 3: Protective clothing, eyewear and protective patient shields (Proposed Horizontal Standards) Data Limite: SC 65B CDV :2012 Transmitters for using in industrial-process control Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

179 systems Part 3: Methods for performance evaluation of intelligent transmitters SC 65B FDIS :2012 Programmable controllers Part 6: Functional safety SC 65C CDV :2012 specifications Part 1: Overview and guidance for the IEC and IEC series Data Limite: SC 65C CDV :2012 specifications Part 2: Physical layer specification and service definition Data Limite: SC 65C CDV :2012 specifications Part 3-1: Data-link layer service definition - Type 1 elements SC 65C CDV :2012 specifications Part 3-2: Data-link layer service definition - Type 2 elements SC 65C CDV :2012 specifications Part 3-3: Data-link layer service definition - Type 3 elements SC 65C CDV :2012 specifications Part 3 -x: Data-link layer service definition - Type x elements SC 65C CDV :2012 specifications Part 3-4: Data-link layer service definition - Type 4 elements SC 65C CDV :2012 specifications Part 3-12: Data-link layer service definition - Type 12 elements SC 65C CDV :2012 specifications Part 3-13: Data-link layer service definition - Type 13 elements SC 65C CDV :2012 specifications Part 3-14: Data-link layer service definition - Type 14 elements SC 65C CDV :2012 specifications Part 3-19: Data-link layer service definition - Type 19 elements SC 65C CDV :2012 specifications Part 3-20: Data-link layer service definition - Type 20 elements SC 65C CDV :2012 specifications Part 3-22: Data-link layer service definition - Type 22 elements SC 65C CDV :2012 specifications Part 3-24: Data-link layer service definition - Type 24 elements SC 65C CDV :2012 specifications Part 4-1: Data-link layer protocol specification - Type 1 elements SC 65C CDV :2012 specifications Part 4-2: Data-link layer protocol specification - Type 2 elements SC 65C CDV :2012 specifications Part 4-3: Data-link layer protocol specification - Type 3 elements SC 65C CDV :2012 specifications Part 4-x: Data-link layer protocol specification - Type x elements SC 65C CDV :2012 specifications Part 4-4: Data-link layer protocol specification - Type 4 elements SC 65C CDV :2012 specifications Part 4-11: Data-link layer protocol Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

180 specification - Type 11 elements SC 65C CDV :2012 specifications Part 4-12: Data-link layer protocol specification - Type 12 elements SC 65C CDV :2012 specifications Part 4-13: Data-link layer protocol specification - Type 13 elements SC 65C CDV :2012 specifications Part 4-14: Data-link layer protocol specification - Type 14 elements SC 65C CDV :2012 specifications Part 4-19: Data-link layer protocol specification - Type 19 elements SC 65C CDV :2012 specifications Part 4-20: Data-link layer protocol specification - Type 20 elements SC 65C CDV :2012 specifications Part 4-22: Data-link layer protocol specification - Type 22 elements SC 65C CDV :2012 specifications Part 4-24: Data-link layer protocol specification - Type 24 elements SC 65C CDV :2010 specifications Part 5-2: Application layer service definition - Type 2 elements SC 65C CDV :2012 specifications Part 5-4: Application layer service definition - Type 4 elements SC 65C CDV :2012 specifications Part 5-5: Application layer service definition - Type 5 elements SC 65C CDV :2012 specifications Part 5-2: Application layer service definition - Type 2 elements SC 65C CDV :2012 specifications Part 5-9: Application layer service definition - Type 9 elements SC 65C CDV :2010 specifications Part 5-10: Application layer service definition - Type 10 elements SC 65C CDV :2010 specifications Part 5-x: Application layer service definition - Type x elements SC 65C CDV :2010 specifications Part 5-12: Application layer service definition - Type 12 elements SC 65C CDV :2012 specifications Part 5-13: Application layer service definition - Type 13 elements SC 65C CDV :2010 specifications Part 5-14: Application layer service definition - Type 14 elements SC 65C CDV :2010 specifications Part 5-24: Application layer service definition - Type 24 elements SC 65C CDV :2010 specifications Part 5-23: Application layer service definition - Type 23 elements IEC Ed. 1.0, Specifications SC 65C CDV :2010 specifications Part 5-19: Application layer service definition - Type 19 elements SC 65C CDV :2010 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

181 specifications Part 5-20: Application layer service definition - Type 20 elements SC 65C CDV :2012 specifications Part 5-22: Application layer service definition - Type 22 elements SC 65C CDV :2010 specifications Part 6-2: Application layer protocol specification - Type 2 elements SC 65C CDV :2010 specifications Part 6-3: Application layer protocol specification - Type 3 elements SC 65C CDV :2012 specifications Part 6-4: Application layer protocol specification - Type 4 elements SC 65C CDV :2012 specifications Part 6-5: Application layer protocol specification - Type 5 elementos SC 65C CDV :2010 specifications Part 6-9: Application layer protocol specification - Type 9 elements SC 65C CDV :2010 specifications Part 6-x: Application layer protocol specification - Type x elements SC 65C CDV :2010 specifications Part 6-10: Application layer protocol specification - Type 10 elements SC 65C CDV :2010 specifications Part 6-12: Application layer protocol specification - Type 12 elements SC 65C CDV :2012 specifications Part 6-13: Application layer protocol specification - Type 13 elements SC 65C CDV :2010 specifications Part 6-14: Application layer protocol specification - Type 14 elements SC 65C CDV :2010 specifications Part 6-19: Application layer protocol specification - Type 19 elements SC 65C CDV :2010 specifications Part 6-20: Application layer protocol specification - Type 20 elements SC 65C CDV :2012 specifications Part 6-22: Application layer protocol specification - Type 22 elements SC 65C CDV :2012 specifications Part 6-23: Application layer protocol specification - Type 23 elements SC 65C CDV :2012 specifications Part 6-24: Application layer protocol specification - Type 24 elements SC 65A FDIS :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications SC 65A FDIS :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems SC 65A FDIS :2012 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC SC 65B Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

182 FDIS :2012 Function blocks Part 1: Architecture SC 65B FDIS :2012 Function blocks Part 2: Software tool requirements SC 65C CDV :2012 Industrial communication networks - Profiles Part 1: Fieldbus profiles Data Limite: SC 65C CDV :2012 Industrial communication networks - Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC Data Limite: SC 65E FDIS 62382:2012 Electrical and instrumentation loop check SC 65B CDV 62703:2012 Expression of performance of fluorometric oxygen analyzers in liquid media Data Limite: SC 65C CDV 62734:2012 Industrial communication networks - Wireless communication network and communication profiles - ISA a Data Limite: SC 77B CDV :2012 Electromagnetic compatibility (EMC) Part 4-6:Testing and measurement techniques - Conducted disturbances, induced by radio-frequency fields immunity test Data Limite: SC 86A FDIS :2012 Optical fibre cables Part 1-23: Generic specification - Basic optical cable test procedures -Cable element test methods Data Limite: SC 86A CDV :2012 Optical fibre cables Part 1-24: Generic specification -Basic optical cable test procedures - Electrical test methods Data Limite: SC 86A CDV :2012 Optical fibre cables Part 2-20: Indoor cables - Family specification for multi-fibre optical cables Data Limite: SC 86A FDIS :2012 Optical fibre cables Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling Data Limite: SC 86A FDIS :2012 Optical fibre cables Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) Optical cables Data Limite: SC 86C CDV :2012 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-11: Tests - Axial compression Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-14: Tests - High optical power Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-19: Tests - Damp heat (steady state) SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-4: Examinations and measurements - Attenuation Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-4: Examinations and measurements - Attenuation Data Limite: SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-49: Measurement: Guide pin retention force for rectangular ferrule multi-fibre connectors Data Limite: SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches Data Limite: SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-52: Measurement -Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangle ferrule, single mode fibres Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

183 SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 071-2: Non-connectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled environments Data Limite: SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 089-2: Non-connectorised single-mode bidirectional OTDR monitoring WWDM devices for Category C - Controlled environment Data Limite: SC 86B FDIS :2012 Fibre optic interconnecting devices and passive components - Performance standard Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C- Controlled environments SC 86B CDV :2012 Fibre optic interconnecting devices and passive components - Fibre optic WDM devices Part 1: Generic specification Data Limite: SC 86C CDV :2012 Fiber optic active components and devices - Package and interface standards Part 17: Transmitter and receiver components with dual coaxial RF connectors Data Limite: SC 86C CDV :2012 Dynamic modules Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized) Data Limite: SC CISPR/A CISPR :2003 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements Data Limite: SC CISPR/A CISPR :2003 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements Data Limite: SC CISPR/A CISPR :2008 /CDV A3:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity - Conducteddisturbance measurements Data Limite: SC CISPR/A CISPR :2011 /CDV A1:2012 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty Data Limite: SC CISPR/I CISPR 20:2006 /CDV A1:2012 Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement Data Limite: SC CISPR/I CDV 35:2012 Electromagnetic Compatibility of Multimedia equipment - Immunity Requirements Data Limite: SC CISPR/I PAS 62825:2012 Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 khz to 30 MHz Data Limite: TC 1 IEC :2002 /FDIS A2:2012 International Electrotechnical Vocabulary Part 131: Circuit theory Data Limite: TC 1 IEC :2001 /FDIS A1:2012 International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices (Proposed horizontal standard) TC 1 IEC :2001 /FDIS A1:2012 International Electrotechnical Vocabulary Part 151: Electrical and magnetic devices (Proposed horizontal standard) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

184 TC 2 FDIS :2012 Rotating electrical machines Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00199; symbol S01863 Wireless connection Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00204; symbol S01868 Two-way single pole and single pole switch Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00205; symbol S01869 Two-way single pole switch with dimmer Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00203; symbol S01867 Double two-way single pole switch Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00200; symbol S01864 Stand alone emergency switch equipment Data Limite: TC 3 CDV 60617:2012 Extended procedure for change request C00201; symbol S01865 Foot switch single pole Data Limite: TC 9 FDIS 60571:2012 Railway applications - Electronic equipment used on rolling stock Data Limite: TC 9 IEC :2012 /CDV A1:2012 Railway applications - Rolling stock equipment - Capacitors for power electronic Part 3: Electric double-layer capacitors Data Limite: TC 9 CDV :2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 1: Protective provisions against electric shock Data Limite: TC 9 CDV :2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 2: Provisions against the effects of stray currents caused by d.c. traction systems Data Limite: TC 9 CDV :2012 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit Part 3: Mutual interaction of a.c. and d.c. traction systems Data Limite: TC 9 IEC :2010 /CDV A1:2012 Railway applications - Insulation coordination Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment Data Limite: TC 9 CDV :2012 Electronic railway equipment - On board driving data recording system Part 1: System specification Data Limite: TC 9 CDV 62724:2012 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines Data Limite: TC 10 CDV 62701:2012 Fluids for electrotechnical applications - Recycled mineral insulating oils for transformers and switchgears TC 14 CDV :2012 Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air Data Limite: TC 14 CDV :2012 Power Transformers Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials Data Limite: TC 15 CDV :2012 Flexible insulating sleeving Part 3: Specifications for individual types of sleeving - Sheet 214:Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall TC 15 IEC :2003 /FDIS A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins TC 15 CDV :2012 Heat shrinkable low and medium voltage moulded shapes Part 1: General requirements TC 26 CDV :2012 Arc welding equipment Part 3: Arc striking and stabilizing devices Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

185 Data Limite: TC 26 CDV :2012 Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements Data Limite: TC 27 CDV :2012 Safety in electroheating installations Part 4: Particular requirements for arc furnace installations Data Limite: TC 27 CDV :2012 Electrical resistance trace heating systems for industrial and commercial applications Part 1: General and testing requirements Data Limite: TC 27 CDV :2012 Electrical resistance trace heating systems for industrial and commercial applications Part 2: Application guide for system design, installation and maintenance Data Limite: TC 29 FDIS :2012 Hearing instruments and hearing instrument systems - General requirements for basic safety and essential performance TC 31 FDIS :2012 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d" TC 31 CDV :2012 Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" Data Limite: TC 31 FDIS :2012 Explosive atmospheres Part 33: Equipment protection by special protection 's' Data Limite: TC 35 FDIS 62281:2012 Safety of primary and secondary lithium cells and batteries during transport Data Limite: TC 35 FDIS 62281:2012 Safety of primary and secondary lithium cells and batteries during transport Data Limite: TC 36 CDV 60507:2012 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems Data Limite: TC 38 CDV :2012 Instrument Transformers Part 4: Combined Transformers Data Limite: TC 40 CDV :2012 Packaging of components for automatic handling Part 4: Stick magazines for electronic components encapsulated in packages of different forms TC 40 CDV :2012 Potentiometers for use in electronic equipment Part 2: Sectional specification: lead-screw actuated and rotary preset potentiometers Data Limite: TC 40 CDV :2012 Potentiometers for use in electronic equipment Part 2: Sectional specification: lead-screw actuated and rotary preset potentiometers Data Limite: TC 40 CDV :2012 Potentiometers for use in electronic equipment Part 5: Sectional specification: single-turn rotary low-power wirewound and non-wirewound potentiometers Data Limite: TC 40 CDV :2012 Potentiometers for use in electronic equipment Part 6: Sectional specification: Surface mount preset potentiometers Data Limite: TC 45 CDV 61435:2012 Nuclear instrumentation - High purity germanium crystals for radiation detectors - Basic measurement methods of characteristics Data Limite: TC 46 CDV :2012 Metallic communication cable test methods Part 4-3: Electromagnetic Compatibility (EMC) - Surface transfer impedance - Triaxial method Data Limite: TC 47 IEC :2006 /FDIS A1:2012 Semiconductor devices - Mechanical and climatic test methods Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) Data Limite: TC 47 CDV 62483:2012 Environmental acceptance requirements for tin whisker susceptibility of tin and tin alloy surface finishes TC 49 CDV :2012 Measurement of quartz crystal unit parameters Part 6 : Measurement of drive level dependence (DLD) Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

186 TC 49 FDIS 62276:2012 Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods Data Limite: TC 51 FDIS 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance Data Limite: TC 51 FDIS :2012 High frequency inductive components Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire Data Limite: TC 55 IEC :2008 /CDV A1:2012 Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminum wire Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 27: Paper tape covered rectangular copper wire Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wires, class 240 Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 Data Limite: TC 55 CDV :2012 Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 Data Limite: TC 55 IEC :2009 /CDV A1:2012 Winding wires - Test methods Part 3: Mechanical properties Data Limite: TC 56 FDIS :2012 Communication networks and systems for power utility automation Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control Data Limite: TC 56 FDIS 62551:2012 Analysis techniques for dependability - Petri net techniques TC 56 CDV 62673:2012 Methodology for communication network dependability assessment and assurance TC 56 PAS 62814:2012 Dependability of Software Products Containing Reusable Components - Guidance for Functionality and Tests Data Limite: TC 57 CDV :2012 Communication networks and systems for power utility automation Part 3: General requirements TC 57 FDIS :2012 Standard for N times 64 kbit per second optical fiber interfaces between teleprotection and multiplexer equipment (IEEE C37.94) Data Limite: TC 57 FDIS :2012 Application integration at electric utilities - System interfaces for distribution management Part 1: Interface architecture and general recommendations Data Limite: TC 57 CDV :2012 Application integration at electric utilities - System interfaces for distribution management Part 9: Interfaces for meter reading and control Data Limite: TC 57 CDV :2012 Application integration at electric utilities - System interfaces for distribution management Part 100: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

187 Implementation profiles Data Limite: TC 57 CDV :2012 Energy Management System Application Program Interface (EMS-API) Part 452: CIM Static Transmission Network Model Profiles Data Limite: TC 57 CDV :2012 Energy Management System Application Program Interface (EMS-API) Part 453: Diagram Layout Profile Data Limite: TC 57 CDV :2012 Energy Management System Application Program Interface (EMS-API) Part 552: CIM XML Model Exchange Format Data Limite: TC 57 CDV :2012 Framework for energy market communications Part 301: Common Information Model (CIM) extensions for markets Data Limite: TC 57 CDV :2012 Framework for energy market communications Part 351: CIM European market model exchange profile Data Limite: TC 61 IEC :2009 /FDIS A1:2012 Household and similar electrical appliances - Safety Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances TC 61 IEC :2008 /FDIS A1:2012 Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractor TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers TC 61 IEC :2008 /FDIS A1:2012 Household and similar electrical appliances - Safety Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances TC 61 IEC :2008 /FDIS A1:2012 Household and similar electrical appliances - Safety Part 2-11: Particular requirements for tumble dryers Data Limite: TC 61 IEC :2006 /FDIS A2:2012 Household and similar electrical appliances - Safety Part 2-14: Particular requirements for kitchen machines TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-15: Particular requirements for appliances for heating liquids TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-21: Particular requirements for storage water heaters TC 61 IEC :2009 /FDIS A1:2012 Household and similar electrical appliances - Safety Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods and other cooking fume extractors TC 61 FDIS :2012 Household and similar electrical appliances - Safety Part 2-35: Particular requirements for instantaneous water heaters TC 61 IEC :2004 /FDIS A2:2012 Household and similar electrical appliances - Safety Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections TC 64 IEC :2011 /FDIS A3:2012 Low-voltage electrical installations Part 5-55: Selection and erection of electrical equipment - Other equipment; Clause 557: Auxiliary circuits TC 66 CDV :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials Data Limite: TC 66 FDIS :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement TC 66 CDV :2012 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

188 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring Data Limite: TC 66 CDV :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization Data Limite: TC 66 CDV :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes Data Limite: TC 66 CDV :2012 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-101: Particular requirements for laboratory equipment for in vitro diagnostic (IVD) medical equipment Data Limite: TC 68 CDV :2012 Magnetic materials Part 8-4: Specifications for individual materials - Cold-rolled non-oriented electrical steel strip and sheet delivered in the fully-processed state TC 68 FDIS :2012 Magnetic materials Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials Data Limite: TC 79 CDV :2012 Video surveillance systems for use in security applications Part 1-1: Video system requirements Data Limite: TC 79 CDV :2012 Video surveillance systems for use in security applications Part 1-2: Video transmission - General video transmission - requirements Data Limite: TC 79 CDV :2012 Video surveillance systems for use in security applications Part 2-1: Video transmission protocols - General requirements Data Limite: TC 79 CDV :2012 Video surveillance systems for use in security applications Part 2-2: Video transmission protocols - IP interoperability implementation based on HTTP and REST services Data Limite: TC 79 CDV :2012 Video surveillance systems for use in security applications Part 2-3: Video transmission protocols - IP interoperability implementation based on web services Data Limite: TC 79 CDV :2012 Alarm systems - Alarm and electronic security systems - Video surveillance systems for use in security applications Part 3: Analog and digital video interfaces TC 80 CDV :2012 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) Part 1: Voyage data recorder (VDR) - Performance requirements, methods of testing and required test results Data Limite: TC 80 CDV :2012 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment fo the Automatic Identification System (AIS) Part 2: Self-organising time division multiple access (SOTDMA) techniques TC 82 CDV :2012 Photovoltaic devices Part 8: Measurement of spectral response of a photovoltaic (PV) device Data Limite: TC 82 CDV 62116:2012 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters Data Limite: TC 82 CDV :2012 Concentrator photovoltaic (CPV) performance testing Part 1: Standard conditions Data Limite: TC 82 CDV 62716:2012 Ammonia corrosion testing of photovoltaic (PV) modules Data Limite: TC 85 FDIS 60688:2012 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals Data Limite: TC 85 CDV :2012 Power quality measurement in power supply systems Part 1: Power Quality Instruments (PQI) Data Limite: TC 85 CDV :2012 Power quality measurement in power supply systems Part 2: Functional tests and uncertainty requirements Data Limite: TC 86 Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

189 CDV :2012 Optical circuit boards Part 2-4: Tests - Optical transmission test for optical circuit boards without input/output fibres Data Limite: TC 88 CDV :2012 Wind turbines Part 2: Small wind turbines Data Limite: TC 88 FDIS :2012 Wind turbines Part 11: Acoustic noise measurement techniques TC 89 CDV :2012 Fire hazard testing Part 9-1: Surface spread of flame - General guidance Data Limite: TC 89 CDV :2012 Fire hazard testing Part 9-2: Surface spread of flame - Summary and relevance of test methods Data Limite: TC 90 CDV :2012 Superconductivity Part 5: Matrix tosuperconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires TC 90 CDV :2012 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires TC 90 CDV :2012 Superconductivity Part 18: Mechanical properties measurement - Room temperature tensile test of Agand/or Ag alloy-sheathedbi-2223 and Bi-2212 composite superconductors Data Limite: TC 90 CDV :2012 Superconductivity Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors Data Limite: TC 91 IEC :2007 /CDV A1:2012 Attachment materials for electronic assembly Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly Data Limite: TC 91 FDIS :2012 Materials for printed boards and other Interconnecting structures Part 2-27 Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad Data Limite: TC 91 FDIS :2012 Materials for printed boards and other interconnecting structures Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad Data Limite: TC 91 FDIS :2012 Materials for printed boards and other interconnecting structures Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly Data Limite: TC 91 FDIS :2012 Materials for printed boards and other interconnecting structures Part 2-40: Reinforced base materials, clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly Data Limite: TC 91 CDV :2012 Test method for erosion of wave soldering equipment using molten lead-free solder alloy Part 1: Erosion test method for metal materials without surface processing Data Limite: TC 95 CDV :2012 Measuring relays and protection equipment Part 27: Product safety requirements Data Limite: TC 95 CDV :2012 Measuring relays and protection equipment Part 121: Functional requirements for distance protection Data Limite: TC 95 CDV :2012 Measuring relays and protection equipment Part 149: Functional requirements for thermal electrical relays Data Limite: TC 96 CDV :2012 Safety of transformers, reactors, power supply units and combinations thereof Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltage exceeding 1000 V Data Limite: TC 96 IEC :2009 /CDV A1:2012 Safety of transformers,reactors, power supply units and combinations thereof Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units Data Limite: TC 100 CDV :2012 Sound System equipment Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

190 Part 3: Amplifiers (GMT) Data Limite: TC 100 IEC :2005 /CDV A1:2012 Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (TA 4) Data Limite: TC 100 IEC :2005 /CDV A1:2012 Consumer audio/video equipment - Digital interface Part 6: Audio and music data transmission protocol (TA 4) Data Limite: TC 100 IEC :2008 /CDV A1:2012 Consumer audio/video equipment - Digital interface Part 8: Transmission of ITU-R BT.601 style digital video data (TA 4) Data Limite: TC 100 CDV :2012 Common control interface for networked digital audio and video products Part 5-2: Transmission over networks - Signalling (TA 4) Data Limite: TC 100 CDV 62394:2012 Service diagnostic interface for consumer electronics products and networks - Implementation for ECHONET (TA9) TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and protocols (TA9) Data Limite: TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 1: Architecture and protocols (TA9) Data Limite: TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 2: DLNA media formats (TA9) Data Limite: TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 3: Link protection (TA9) Data Limite: TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 4: DRM interoperability solutions (TA 9) Data Limite: TC 100 CDV :2012 Digital living network alliance (DLNA) home networked device interoperability guidelines Part 5-1: DLNA device profile guidelines - General (TA 9) Data Limite: TC 100 CDV :2012 Terrestrial digital multimedia broadcasting (T-DMB) receivers Part 3:Common API (TA1) TC 100 CDV :2012 Universal Serial Bus interfaces for data and power Part 1: Universal Serial Bus Specification, Revision 2.0 (TA 14) Data Limite: TC 100 CDV :2012 Universal Serial Bus interfaces for data and power Part 2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) Data Limite: TC 100 CDV :2012 Universal Serial Bus interfaces for data and power Part 3: USB Battery Charging Specification, Revision 1.2 (TA 14) Data Limite: TC 100 CDV :2012 Universal Serial Bus interfaces for data and power Part 4: Universal Serial Bus Cables and Connectors Class Document Rev. 2.0 (TA 14) Data Limite: TC 101 IEC :2003 /CDV A1:2012 Electrostatics Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors Data Limite: TC 101 FDIS :2012 Electrostatics Part 4-10: Standard test methods for specific applications - Two-point resistance measurement Data Limite: TC 104 FDIS :2012 Environmental testing Part 2-78: Tests - Test Cab: Damp heat, steady state TC 105 FDIS :2012 Fuel cell technologies Part 5-1: Portable fuel cell power systems - Safety Data Limite: TC 105 IEC :2010 /FDIS A1:2012 Fuel cell technologies Part 6-100: Micro fuel cell power systems - Safety Data Limite: TC 106 CDV :2012 Measurement of DC magnetic fields, AC magnetic and electric fields from 1 Hz to 100 khz with regard to Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

191 exposure of human beings - Special requirements for instruments Data Limite: TC 107 FDIS :2012 Process management for avionics - Atmospheric radiation effects Part 2: Guidelines for single event effects testing for avionics systems TC 116 CDV 6XXXX-3-6:2012 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part 3-6: Particular requirements for diamond drills with liquid system Data Limite: TC 108 FDIS 62623:2012 Desktop and notebook computers - Measurement of energy comsumption TC 108 FDIS 62623:2012 Dimensions of half pot-cores made of ferrite for inductive proximity switches TC 110 CDV :2012 Liquid crystal display devices Part 2-1: Passive matrix monochrome LCD modules - Blank detail specification Data Limite: TC 110 CDV :2012 Organic light emitting diode (OLED) displays Part 5-3: Measuring methods of image sticking and lifetime TC 110 CDV :2012 LCD Backlight Unit Part 1-1: Generic specification Data Limite: TC 110 FDIS :2012 LCD backlight unit Part 2: Electro-optical measurement methods of LED backlight unit Data Limite: TC 110 CDV :2012 3D Display devices Part 1-2: Generic - Terminology and letter symbols Data Limite: TC 112 CDV :2012 Electrical insulating materials - Thermal Endurance Properties Part 1: Ageing procedures and evaluation of test results Data Limite: TC 112 CDV :2012 Electrical insulating materials - Determination of the effects of ionizing radiation Part 1: Radiation interaction and dosimetry Data Limite: TC 116 CDV 6XXXX-3-1:2012 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety Part 3-1: Particular requirements for transportable table saws Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

192 11. Projetos de normas da Organização Internacional de Normalização (ISO)/Comissão Eletrotécnica Internacional (IEC) Os projetos de norma estão organizados por Comité Técnico conjunto ISO/IEC Projetos em inquérito público Para cada referência menciona-se a designação codificada, o título e a data limite para a apresentação de comentários. ISO/IEC TC CABPUB DIS :2012 Conformity assessment - Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems Data Limite: TC JWGFPR pren :2012 Railway applications - Fire protection on railway vehicles Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles Data Limite: Lista mensal documentos Mod-DNOR-01-08_ setembro 2012

193 12. Edição e anulação de outros Documentos Normativos 12.1 Documentos Normativos editados Para cada referência, menciona-se a designação codificada (prefixos DNP TS, DNP TR, DNP Guia, DNP CEN/TS, DNP CEN/TS, DNP CEN Guia, DNP CEN/CLC Guia, DNP CLC/TS, DNP CLC/TR, DNP CLC Guia, DNP CEN/CLC, DNP ENV, DNP CWA, DNP ISO/TS, DNP ISO/TR, DNP ISO Guia, DNP ISO/IEC Guia, DNP IEC/TS, DNP IEC/TR, DNP ISO/PAS, DNP IWA e DNP IEC/PAS, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, o número do Termo de Aprovação e a respetiva data. Os Documentos Normativos referenciados entram em vigor no dia seguinte ao da edição desta Lista Mensal. LISTA VAZIA Lista mensal documentos Mod-DNOR-01-08_ setembro 2012