First Responder Support Tools (FiRST), ios, User Manual Version 3.0

Transcription

1 Table of Contents Purchase and Installation... 2 Purchasing... 2 Registering... 2 Placing Incidents... 3 Location... 3 Improvised Explosive Device (IED) Incident... 3 Access to IED data... 3 User Defined IED... 4 Placing IED... 5 Add Contours... 6 Hazmat Incident... 6 Placing Hazmat... 6 Response Guide... 8 Changing Weather... 9 Move Incidents... 9 Annotations, Points of Interests (POIs) and Roadblocks Place Annotations Query Points of Interest (POIs) Assess Roadblocks Incidents Offline Maps FiRST Sharing Service Join and View Groups Group Permissions and Alerting Preferences Posting Incidents View Group Incidents... 19

2 Purchase and Installation Purchasing FiRST is available on itunes accessible through the itunes application or through the Apps application on your mobile device. Search IED Hazmat to easily find the FiRST app, our link to the app from support tools/id ?mt=8. Volume purchases of the FiRST application are available through the itunes Volume Purchase Program (VPP). Find out more about itunes VPP here: Registering After installation, open the FiRST app to register the application. You must have network connectivity to register the app. *** *** addresses included in the registration dialog will receive an to validate the address. Please check your SPAM/Junk folder if you do not see an a few minutes after registering the application. Users are not required to validate an address to use the application; however, users will not be able to request additional data or capabilities nor can they interact with the FiRST Sharing Service (FSS) without a validated . Note the primary address registered will be the address posted with any incident the user posts to the FSS. 2

3 Placing Incidents Only one incident can be placed on the map at a time. Placing of incidents is done from the initial FiRST screen by selecting Place Incident. Location The location button allows users to search a location via address search, device GPS location, lat/long coordinates, or by scrolling the map under a set of cross hairs. Incidents are placed at the center of the map at the time of placement, but can be moved after placement (see Move Incidents below). Improvised Explosive Device (IED) Incident IED incidents provide standoff for mandatory and shelter in place distances. FiRST includes a set of 8 IED types and distances based on the US Department of Homeland Security (DHS) bomb standoff guide. This data is treated as sensitive information and may not be available for your use. Access to IED data DHS bomb standoff data is automatically authorized for users that validate an address ending in.gov,.mil, or.us. Other users can request access to the data through the application. Users should provide a short justification for their use of the data. Use of the data for response or planning activities in the US is often approved. Access to data by users outside the US will be adjudicated on a case bycase basis by the DHS Office for Bombing Prevention. Note, if after submitting a request for IED data access the user gets a message stating that the user could not be found, it is likely that the user has not validated their registration address. 3

4 *** Once approved for data access, users will receive both an alert on their mobile device and an to their registered addresses stating approval. After approval, users will need to return to the FiRST main screen before access to the IED data is provided. User Defined IED All users are able to create and save their own IED types with associated bomb explosive weights and standoff. Damage and injury contours will be based on the saved IED explosive weights as described in Add Contours. To view or edit the details of an IED, select the blue button to the right of the threat type. 4

5 Placing IED To place an IED, users should first navigate the map to the general area of the incident. Select Place Incident, IED, then select the IED type. The map will display the incident location with Mandatory and Shelter in Place standoff. A legend with the standoff distances will display at the top of the map. Note, standoff distances are stored on the phone in metric units. When the legend shows distances in feet, the value shown may be off by 1 foot higher or lower than defined due to rounding of the metric standoff distance. After placing incidents, users can specify display of US or metric distances in legends by selecting Options, Map Options, US/Metric. Users can also toggle on and off the display of shading within the standoff zones. To change the IED type after placing, select IED at the top of the map screen. 5

6 Add Contours Once an IED is placed on the map, users can display 6 pre defined damage and injury contours around the IED. These contours are based on FEMA 426 (Reference Manual to Mitigate Potential Terrorist Attacks Against Buildings). Users may need to scroll the dialog to see all selection choices. Turn on or off contours and contour legend from the Options, Map Options dialog. By touching the legend, a pop up dialog will display showing the full title for the specific contour. Hazmat Incident Hazmat standoff is based on the 2012 Emergency Response Guidebook (ERG) ( Placing Hazmat To place a Hazmat, users should first navigate the map to the general area of the incident. From the initial FiRST screen, select Place Incident, Hazmat to get to the Hazmat Summary screen. The Hazmat Summary screen allows user to select/confirm the hazmat type, size and time. Each of these selections may affect the standoff distances shown on the map. Select Update Map to display the incident standoff data on the map. The map will display the incident location with Isolate and Protect standoff. A legend with the standoff distances will display at the top of the map. 6

7 To change the hazmat type, users should select the hazmat from the Hazmat Summary screen. The follow on screen provides the list of over 3,000 ERG hazmats. From the top of this screen, users can type in the search box parts of the hazmat name to quickly access the appropriate material. Next to each hazmat name is a favorites star. Press hold the start to define a chemical as a favorite. Press hold again to unselect the hazmat as a favorite. Users can filter the list of hazmats by press hold of the favorite star at the top of the hazmat selection dialog. 7

8 After placing incidents, users can specify display of US or metric distances in legends by selecting Options, Map Options, US/Metric. Users can also toggle on and off the display of shading within the standoff zones. Response Guide Selecting Response Guide from the Hazmat Summary screen provides access to the ERG response guide associated with the selected hazmat. From the upper right of the guide, users can select the telephone icon to access the list of contacts provided with the ERG. Selecting a contact will allow the user to call the contact. Users should consult the Response Guide for additional detail about the selected chemical hazards and response guidance. 8

9 Changing Weather Approximately 600 of the ERG hazmats have inhalation hazards. As such, these hazmats have a Protect distance that is oriented in the direction of winds. For winds that are less than 3 knots (~3.5 mph or 5.5 kph), the protect distances assumes calm winds and defines the protect distances in all directions. User should be careful to understand what winds are being used in defining any downwind protection distances. Users can review and change weather after an incident is placed by selection Options, Weather. Three tabs at the top of the Weather dialog allow users to view Forecast, User Input, and Compass options. Current and Forecast weather is provided from three sources: WeatherBug network of current weather ( Norwegian Meterologisk Institutt ( which provides worldwide weather forecast US National Oceanic and Atmospheric Administration forecast weather for US locations only ( From the weather dialog, users can also select User Input and Compass weather. To use Compass weather, lay the phone flat and aim the phone into the wind, then select Update Map. Weather selections persist in the application until changed by the user. To update current or forecast weather without changing the weather source, users must go to the Weather dialog and select the Update Weather Forecast button. Move Incidents Incidents can be moved in two ways. By selecting the Location button at the top of the map screen, users can select a new location from the Location Search screen. The other method to move the incident is to scroll the map to the desired location of 9

10 the incident, then press hold where the incident should be placed. A dialog will pop up to all the user to Move IED/Hazmat to here. Annotations, Points of Interests (POIs) and Roadblocks Place Annotations To place a point annotation, press hold the map at the location of the annotation. A dialog will appear to allow placement of the annotation. Once placed, selecting the annotation on the map will allow the user to change the text associated with the map pin. Annotation pins are shown as purple. Users can toggle the display of annotations from the Options, Map Options screen. 10

11 Query Points of Interest (POIs) With an incident defined on the map, users can perform a Google Search based on pre defined keywords around the incident location. Search results will be displayed on the map color coded to the keyword type. Access POIs by selecting Options, POIs. From the POI screen, select Run POI Query. Selecting pins on the map provides the name for the POI search result. Keywords used in the Google Search include: Police: Fire: Hospitals: Schools: Government: 11

12 Users must be careful in making decisions solely on the results of the POI search. Data returned from Google Search is not guaranteed to be accurate in content or location. Assess Roadblocks Once an incident is placed on the map, FiRST allows the user to quickly define an initial set of roadblocks necessary to isolate the incident area. Access this functionality by selecting Options, Roadblocks. Invoking roadblocks sends data to the ARA Chokepoint server to perform the analysis and return results. The roadblock functionality uses US census TIGER data ( data/data/tiger.html) and as such is only applicable to US and US territories. The roadblocks provided are a minimum set of roadblocks required to isolate an area of road (defined by the isolated radius) from roads outside an area (defined by the search radius). Users can define the isolated and search radii, which will always be centered at the incident location. Results returned are shown as yellow pins. Selecting a pin provides the street(s) associated with the roadblock. If you initially do not see any results, adjust your map view to show the entire search radii and ensure the isolate radii covers areas that includes roads. 12

13 Users must be careful in making decisions solely on the results of the roadblock results. Data used in the assessment is not always accurate and does not include access through parking lots or driveways. Roadblocks functionality also does not consider traffic direction (ie. It treats all roads as two way roads). Incidents To an incident and all associated POIs, Roadblocks, annotations, contours, and standoff data, select Options, Results. Users will be provided an message that includes a text summary of the incident, an image of the map at the time the option was selected, and attachments of the map Shape and KML files. 13

14 Offline Maps With an incident placed on a map, users can save the map image for later reference by selecting Option, Offline Map. Selecting Capture Map Image allows the user to save the map image with a user defined name. This data can be viewed at a later date, even without network connectivity, by selecting Option, Offline Map, View Saved Maps. *** To view saved maps, select View Saved Maps. The initial screen allows users to filter results among event types. Scroll to the desired map and select Use Map. An image of the captured map will appear. Users can change or delete maps from the buttons in the upper right of the screen. To return to an interactive map, select the Back button. 14

15 FiRST Sharing Service The FiRST Sharing Service (FSS) is a service new in The service allows users of the FiRST app to post incidents and retrieve incidents based on the profile and groups associated with the user. FSS also allows groups to share incident data with external systems. To use the service, a FSS organizational account must first be established. You can find out more at Join and View Groups To post or view incidents to a FSS group (also referred to as Organizations), users must be associated with a group(s). Users also must have validated a registration address. From the main FiRST screen, select Options, FiRST Sharing Service. To join a group, select Join Organization. If you know the group code that you wish to join, you can input it and Submit. If you do not know the group code, you can Browse Public Organizations to find the appropriate organization. If you do not see the organization that you want to join listed, it is either because the organization has not established an FSS account or the organization has selected to not publically display their organization details for users to request joining. Selecting an organization from the list provides information (based on the organization s specified profile) on the organization s contract information and description. Select Apply to Organization to provide a justification for you to join. Submitting the justification will send the justification and the user s FiRST registration details to the FSS Organizational Administrator for adjudication. 15

16 *** Once a request to join an organization is submitted, the FSS Organizational Administrator will receive an to let them know that a request to join is pending. After approval to join the organization, FiRST users will receive an alert indicating the approval and the organization will show up on their My Organization screen. The FSS Organizational Administrator must specify the posting rights for each approved user. 16

17 Group Permissions and Alerting Preferences Users can view their group specified permissions (post incidents internal/external to the group) and specify their alerting preferences. To do this, from the main screen, select Options, FiRST Sharing Service, My Organizations. Select an organization. The follow on screen provides details for the organization and user preferences. Select Submit Changes to save any changes to the settings. Posting Incidents After joining a group, users are allowed to view incidents posted by users associated with the group. Users are allowed to post incidents to the group provided the FSS Organizational Administrator has granted those user rights to the user. 17

18 To post an incident to a group(s), users must first have an incident defined in the FiRST app. Select Options, Post to FiRST Sharing Service. On the following screen, users must name the incident, select one or more groups to post to, define whether the incident can be shared external to the group (based on FSS Organizational Profile), the incident type (operational or exercise), incident time and expiration of the post, any notes for the post, and any images that the user would like to include. Select Post to FSS to send the incident to the FSS server. *** *** 18

19 Once posted, users associated with groups receiving the post will receive an alert that a new post is available. View Group Incidents Users can view posted incidents from the FSS by 1) from the main screen, select Options, FiRST Sharing Service, View Incidents or 2) from an incident map screen, select Options, View Incidents from FSS. Selecting Yes on the next dialog will remove existing incidents on the map. Once selected, a list of posted incidents for any group that the user belongs to will be displayed. Incidents are sorted by incident times. A search field at the top of the list can be used to search any keyword associated with the incident title, type, or group name. 19

20 Upon selecting an incident, the posted incident details are displayed on the map. Note, showing GPS location and injury/damage contours are user preferences. These are not stored as part of the posted incident. Once the posted incident is displayed, the user can manipulate the incident as previously described. Along with viewing incident map details, users can see other data about the posted incident by selecting Options, View Incident Details. Images associated with the post are shown at the bottom of the incident details screen. Selecting an image will open a dialog to see the full size of the image. 20