2 nd National Workshop on Functional Products - Development and Sales Luleå, October 24-25 2007 Final schedule (v.071021) 2007, Tobias Larsson, tobias@ltu.se 1
Welcome!! With 4 keynotes, one policy speaker (VINNOVA) and 17 papers we ve tried to schedule an interesting program that will create something to talk about during the breaks! Participants from 5 countries! Conference dinner with chocolate tasting session! Enjoy!» Tobias Larsson, Luleå University of Technology» Anna Öhrwall-Rönnbäck, Linköping University» Margareta Groth, VINNOVA 2007, Tobias Larsson, tobias@ltu.se 2
Day 1, 24 Oct! 10.00 : Registration & coffee 30 min! 10.30 : Welcome 10 min» Prof Tobias Larsson, LTU, Conference Chairman» Prof Lennart Karlsson, LTU, Centre Director, Faste Laboratory! 10.40 : Key 1 Service Engineering: background, basis and growth - Innovation with high-level integration of manufacturing and service development 40 min» Prof Yoshiki Shimomura, Tokyo Metropolitan University, Japan! 11.20 : Key 2 Challenges for the efficient aeronautical enterprise 40 min» Adj Prof Ola Isaksson, Volvo Aero Corporation, Sweden! 12.00 : Lunch 60 min! 13.00 : Paper presentation session 20 min / paper» 1. Focusing on the Two Life Cycle Dimensions of Product/Service-Systems Design (Tan, McAloone)» 2. Concept Automation and Decision Support in a Functional Product Development Perspective (Nergård, Andersson, Johansson)» 3. Developing Integrated Product and Service Offerings - A Comparison between Large and Small Manufacturing Firms Business Model Transitions (Öhrwall Rönnbäck, Ölundh Sandström)» 4. PSS for private consumers - User requirements and prerequisites for consumer acceptance (Rexfelt, Hiort af Ornäs, Rosenblad)» 5. Needs as a foundation for lifecycle commitments (Ericson, Larsson)! 14.40 : Break 30 min! 15.10 : Paper presentation session 20 min / paper» 6. Service CAD System to Integrate Product Behavior and Service Activity for Total Value(Hara, Arai, Shimomura)» 7. Cost Evaluation Method for Service Design Based on Activity Based Costing (Kimita, Hara, Shimomura, Arai)» 8. Application of Theoretical Concepts from Product Development in PSS Design (Schendel)» 9. A Design Process Activities basis for Business Decision Support in Design of Hardware Based Services (Löfstrand, Isaksson)» 10. Knowledge Sharing in a Customer-to-Subcontractor Relation (Sandberg, Näsström)! 16.50 : Dr Lars Wärngård, Director of Competence Areas Division, VINNOVA 15 min! 17.05 : End of day 1 presentations! 19.00 : Workshop dinner at Nordkalotten 2007, Tobias Larsson, tobias@ltu.se 3
Day 2, 25 Oct! 08.30 : Key 3 35 min» Prof Tamio Arai, The University of Tokyo, Japan! 09.05 : Paper presentation session 20 min / paper» 11. Achieving Mass Customization through Servicification (Sundin, Lindahl, Comstock, Shimomura, Sakao)» 12. Educating Engineering Designers for a Multidisciplinary Future (Bergström, Ericson, Matzen, Tan)» 13. Open approaches and methods to enable Functional Product Development (Ylinenpää, Larsson)! 10.05 : Break 35 min! 10.40 : Paper presentation session» 14. A Simulation Driven Rotordynamical Design Method Supporting Functional Product Development (Karlberg)» 15. Enabling technologies for distributed collaboration in functional product development (Bergström, Törlind)» 16. Proposal of a Measuring Method of Customer s Attention and Satisfaction on Services (Yoshimitsu, Arai, Shimomura)» 17. Knowledge Engineering for Functional Product Innovation (Larsson, Karlsson, Isaksson)! 12.00 : Lunch 60 min! 13.00 : Key 4 Challenges of Industrial Service Business Development 35 min» Prof Vesa Salminen, Lappeenranta University of Technology, Finland! 13.35 : Workshop summary 25 min» Keynotes and Conference Chair! 14.00 : Workshop close 2007, Tobias Larsson, tobias@ltu.se 4
Presentations 1-9! 1. Focusing on the Two Life Cycle Dimensions of Product/Service-Systems Design» PhD student Adrian TAN & Associate Professor Tim McALOONE Technical University of Denmark, Department of Mechanical Engineering, Lyngby, Denmark! 2. Concept Automation and Decision Support in a Functional Product Development Perspective» Henrik NERGÅRD (1), Petter ANDERSSON (1,2), Christian JOHANSSON (1) (1) Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden (2) Volvo Aero Corporation, Trollhättan, Sweden! 3. Developing Integrated Product and Service Offerings - A Comparison between Large and Small Manufacturing Firms Business Model Transitions» Anna ÖHRWALL RÖNNBÄCK (1) and Gunilla ÖLUNDH SANDSTRÖM (2) (1) Linköping university, Department of Management and Engineering, Linköping, Sweden. (2) Royal Institute of Technology, School of Industrial Engineering and Management, Stockholm, Sweden.! 4. PSS for private consumers - User requirements and prerequisites for consumer acceptance» Oskar REXFELT (1), Viktor HJORT AF ORNÄS (1,2), Elsa ROSENBLAD (1) (1) Dept. of Product and Production Development, Chalmers University of Technology, Gothenburg, Sweden (2) School of Technology and Society, University of Skövde, Skövde Sweden! 5. Needs as a foundation for lifecycle commitments» Åsa ERICSON, Tobias LARSSON Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden! 6. Service CAD System to Integrate Product Behavior and Service Activity for Total Value» Tatsunori HARA (1), Tamio ARAI (1), Yoshiki SHIMOMURA (2) (1) Department of Precision Engineering, The University of Tokyo, Tokyo, Japan (2) Department of System Design, Tokyo Metropolitan University, Tokyo, Japan! 7. Cost Evaluation Method for Service Design Based on Activity Based Costing» Koji KIMITA (1), Tatsunori HARA (2), Yoshiki SHIMOMURA (1), Tamio ARAI (2) (1) Department of System Design, Tokyo Metropolitan University, Tokyo, Japan (2) Department of Precision Engineering, The University of Tokyo, Tokyo, Japan! 8. Application of Theoretical Concepts from Product Development in PSS Design» Dipl.-Ing. Christoph SCHENDEL, Research Associate Technische Universität Darmstadt, Produktentwicklung und Maschinenelemente, Darmstadt, Germany! 9. A Design Process Activities basis for Business Decision Support in Design of Hardware Based Services» Magnus LÖFSTRAND, Ove ISAKSSON Faste Laboratory, Division of Computer Aided Design, Luleå University of Technology, Sweden 2007, Tobias Larsson, tobias@ltu.se 5
Presentations 10-17! 10. Knowledge Sharing in a Customer-to-Subcontractor Relation» Stefan SANDBERG, Mats NÄSSTRÖM Faste Laboratory, Division of Computer Aided Design, Luleå University of Technology, Sweden! 11. Achieving Mass Customization through Servicification» SUNDIN (1), LINDAHL (1), COMSTOCK (1), SHIMOMURA (2), SAKAO (3) (1) Dept. of Management and Engineering, Linköping University, Sweden. (2) Dept. of Mechanical Engineering, Tokyo Metropolitan University, Japan. (3) Dept. of Mechanical Engineering, Darmstadt University of Technology, Germany.! 12. Educating Engineering Designers for a Multidisciplinary Future» Mattias BERGSTRÖM (1), Åsa ERICSSON (1), Matzen (2), Tan (2) (1) Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden (2) Technical University of Denmark, Department of Mechanical Engineering, Lyngby, Denmark! 13. Open approaches and methods to enable Functional Product Development» Håkan YLINENPÄÄ (1), Tobias LARSSON (2) (1) Faste Laboratory, Division of Entrepreneurship, Luleå University of Technology, Sweden (2) Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden! 14. A Simulation Driven Rotordynamical Design Method Supporting Functional Product Development» Magnus KARLBERG Faste Laboratory, Division of Computer Aided Design, Luleå University of Technology, Sweden! 15. Enabling technologies for distributed collaboration in functional product development» Mattias BERGSTRÖM, Peter TÖRLIND Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden! 16. Proposal of a Measuring Method of Customer s Attention and Satisfaction on Services» Yohei YOSHIMITSU (1), Tamio ARAI (1), Yoshiki SHIMOMURA (2) (1) Dept. of Precision Engineering, University of Tokyo, Tokyo, Japan (2) Dept. of Systems Design, Tokyo Metropolitan University, Tokyo, Japan! 17. Knowledge Engineering for Functional Product Innovation» Ola ISAKSSON (1,3), Tobias LARSSON (1), Lennart KARLSSON (2) (1) Faste Laboratory, Division of Functional Product Development, Luleå University of Technology, Sweden (2) Faste Laboratory, Division of Computer Aided Design, Luleå University of Technology, Sweden (3) Volvo Aero Corporation, Trollhättan, Sweden 2007, Tobias Larsson, tobias@ltu.se 6
Participants! About 50 registered participants (2007-10-05) from» Sweden» Denmark» Finland» Japan» Germany 2007, Tobias Larsson, tobias@ltu.se 7
Tobias Larsson Professor Division of Functional Product Development Faste Laboratory Luleå University of Technology E-mail: tobias@ltu.se Cell: +46 70 511 94 16 http://www.ltu.se/tfm/fpd Great ideas grow better below zero! 2007, Tobias Larsson, tobias@ltu.se 8