Refrigeration & Air Conditioning



Similar documents
Refrigeration & HVAC

National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook

Heating, Ventilation, Air Conditioning and Refrigeration (HVACR)

Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system

AUTOMOTIVE AIR CONDITIONING SYSTEM.

Refrigeration & Air-conditioning Technician

P. A. Hilton Ltd REFRIGERATION & AIR CONDITIONING VAPOUR COMPRESSION HEAT PUMPS VENTILATION VOCATIONAL

SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING

Elements Elements describe the essential outcomes.

Automotive & Commercial. Air Conditioning & Refrigeration Courses 2015

GENERAL INFORMATION FOR REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ).

DIABLO VALLEY COLLEGE CATALOG

Training Centre is at the back of KFC in Three Rivers. Next to Telkom

Heating and Air Conditioning

Part A: Fluid properties

MACHINES FOR REFRIGERATION AND AIR CONDITIONING

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS

Refrigeration, Air Conditioning and Appliance Servicing

MINNESOTA WEST COMMUNITY & TECHNICAL COLLEGE COURSE OUTLINE

Any Service Technician Can Fix It A Good Service Technician Can Figure Out What s Wrong With It.

COMPETENCY ANALYSIS PROFILE Refrigeration and Air Conditioning Systems Mechanic - Branch 1 313A


Indoor coil is too warm in cooling mode or too cold in heating mode. Reversing valve or coil thermistor is faulty

Elements Elements describe the essential outcomes.

Low GWP Replacements for R404A in Commercial Refrigeration Applications

ECOCIAT. Domestic hot water heat recovery unit

AUTOMOTIVE AIR CONDITIONING

COURSE TITLE : REFRIGERATION AND AIR CONDITIONING COURSE CODE : 4029 COURSECATEGORY : A PERIODS/WEEK : 5 PERIODS/SEMESTER : 90 CREDITS : 4 OBJECTIVES

Fully automatic air conditioning service! Bosch ACS 600, 601 and 650 for the workshop

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE. ACHP 104 Refrigeration & Air Conditioning Service II

Federal Wage System Job Grading Standards for Air Conditioning Equipment Operating, Table of Contents

Section 7. Evaporator thermistor. Under-and-over pressure safety switches. Connections to the ECU

Air Conditioner Water Heater - A Product of HotSpot Energy LLC

HVAC-02, Air Conditioning Troubleshooting and Repair

GLYCOL CHILLER SYSTEM TROUBLESHOOTING 101

Test Code: 8297 / Version 1

EU F-Gas Regulation Guidance Information Sheet 5: Stationary Air-conditioning and Heat Pumps

Automobile Air Conditioning Primer

MIDLAND COLLEGE SYLLABUS DEMR 1323 AUTOMOTIVE HEATING AND AIR CONDITIONING 2-4

SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM

Skills Canada National Competition Instructions and Competition Details 38 Refrigeration and Air Conditioning / Post - Secondary May 27-30,

Name: Air Conditioning, Heating and Refrigeration ( )

Air Conditioning System

Cold Room & Refrigeration System (Casserole Assembly) No of units: 1

SECTION HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT

Training courses 2016

COOLSIDE box R410A. conditioned server - racks for direct installation into the room INVERTER E C

AUTOMATIC CONTROL HEATING, VENTILATION AND AIR CONDITIONING SYSTEM

Nordic Heat Pump Product Guide

Refrigerant Choices for Commercial Refrigeration. Finding the Right Balance

Refrigerant Charging Unit ICOGD. 020AH1000 Operating Manual. FR İ-COLD Rev. 00

Perfection for Professionals: Air Conditioner Service with Bosch ACS 751 and 651

Failure code manual. content

HEATING, VENTILATION & AIR CONDITIONING

Air conditioning, electrical testing

Heater and Air Conditioner, Blend Air System, Troubleshooting 83.06

AIR CONDITIONING EFFICIENCY F8 Energy eco-efficiency opportunities in Queensland Foundries

CoolTeg Plus Chilled Water (CW) version: AC-TCW

HVAC Career Ladder, Curriculum and Job Descriptions

Building Energy Systems. - HVAC: Heating, Distribution -

EL DORADO UNION HIGH SCHOOL DISTRICT Educational Services ADVANCED AUTOMOTIVE TECHNOLOGY (541) Trades & Industrial Education

Chris Clement 701 Bayou Lane Thibodaux, LA

REQUIREMENTS FOR CERTIFICATION SCHEME FOR SERVICING QUALITY FOR CHILLERS AIR-CONDITIONING INSTALLATIONS GOVERNMENT BUILDINGS

VOCATIONAL TRAINING UNITS 2013 CATALOG

In the compression-refrigeration loop (air conditioning), which is likely to be warmer? 1. Condenser coil 2. Evaporator coil

Addendum to Florida Academy Catalog for: HVAC Fundamentals HVAC Advanced Fundamentals

Precision for Professionals: Air Conditioner Service with Bosch ACS 751, 651 and 551

Table Z. Troubleshooting Chart for Air Conditioners. Cause

Troubleshooting HVAC/R systems using refrigerant superheat and subcooling

SECTION HEAT PUMPS

COMPRESSOR REPLACEMENT PROCEDURE

SERVICE MANUAL SPLIT SYSTEM ROOM AIR CONDITIONER SHARP CORPORATION SHARP CORPORATION CONTENTS

Customized Assessment Blueprint

EVANS ELECTRONIC TEMPERATURE CONTROL TROUBLESHOOTING GUIDE for systems equipped with electric coolant valve and external PC board.

CONTENTS 1. IMPORTANT NOTICE 2 2. TECHNICAL SPECIFICATION 3 3. OPERATION DETAILS 4 4. ELECTRICAL SCHEMATIC DIAGRAM EXPLOSION VIEW 16 6

CLASS B AIR CONDITIONING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION

AIR-COOLED CHILLERS APPLIED SYSTEMS. EUWA*5-24KAZW - EUWY*5-24KAZW -

Training Syllabus to Instruct/Prepare for the ASE Transit Bus HVAC Test

SYLLABUS FOR SIX MONTHS - FULL TIME CERTIFICATE COURSE IN REFRIGERATION AND AIR-CONDITIONING. Effective From :- UNDER DEVELOPMENT.

SASO XXXX:2016. (Including the modifications approved in Saudi Council Board No. XXX/2016) LARGE CAPACITY AIR CONDITIONERS

Fujitsu General New Zealand Ltd

ADVANCED TRAINING INSTITUTE, HYDERABAD PR04/F01

HVAC Claims: Repair vs. Replacement

Classification and Qualification STANDARDS

UEENEEJ164A Analyse the operation of HVAC air and hydronic systems

Air Conditioning. The opportunity for energy efficiency. Low cost actions to reduce energy usage now

Refrigeration Basics 101. By: Eric Nelson

Presentation Outline. Common Terms / Concepts HVAC Building Blocks. Links. Plant Level Building Blocks. Air Distribution Building Blocks

ASHRAE Boston Chapter Meeting Designing AC Refrigeration Systems Lessons Learned February 11, 2014

Chapter 5. Components, Symbols, and Circuitry of Air-Conditioning Wiring Diagrams

POLICY BULLETIN Tecumseh Compressor Company Compressor Group

NSN

UA-NJ Air Conditioning & Refrigeration Division Training Curriculum

Heat Pump Training System

SERVICE INSTRUCTION R410A. SPLIT TYPE ROOM AIR CONDITIONER Universal Floor / Ceiling Duct / Cassette Wall Mounted / Floor type INVERTER MULTI

2. AIRCONDITIONING AND REFRIGERATION

Ground-breaking conversion of critical Data Room WaterChiller from R22 to R422D / MO29

Transcription:

& Air Conditioning

The Fundamentals of Commercial Trainers Air Conditioning Systems Semi-Hermetic Air Compressors Controls Automotive Air Conditioning Chilled Water Air Conditioning Plant More and more countries are using Air Conditioning in their offices, homes and cars. systems, for example, for keeping food products fresh and computer rooms operable, are now in everyday use around the world. The importance of these systems and their increasing use means that there is a growing requirement to train Engineers and Technicians on the operation and maintenance of associated products. Feedback s wide range of refrigeration equipment cover a variety of techniques and disciplines, suitable for technicians and engineers alike. They provide a hands on approach, whilst showing the fundamentals of refrigeration principles. - 98 -

39-301 SYSTEM Training This transportable, bench mounted apparatus teaches students the fundamentals of the refrigeration cycle. Using authentic, commercial grade it allows the student to perform fault finding and servicing exercises using a safe and accessible system. The unit constitutes a vapour compression refrigeration system that emulates the plant and control system of a typical small commercial chiller or walk in cold store. Students are able to learn how to perform the safe recovery and recharging of refrigerant and use the system to practice the repair and replacement of pipework. The unit comprises a 0.5 hp condensing unit, forced air evaporator, thermostatic expansion valve and an electronic thermostat controller. Service ports for the fitting of optional manifold service gauges are provided. A basic version of this product suitable for refrigerant handling only is also available (see ordering guide). Subject Areas The fundamentals of refrigeration The vapour ompression cycle Basic thermodynamics Refrigerant handling Setting refrigeration controls Setting system superheat system fault diagnosis pipework design and manufacture Small commercial refrigerator electrical wiring and circuit diagnoses Commercial refrigeration installation, servicing and repair Uses commercial grade Suitable for both technician training and vocational teaching Portable design permits on-site training Uses non-ozone depleting gas (R134a) Open frame design allows hands-on access to all areas Available for either 110 V or 230 V mains supply - 99 -

39-305 SYSTEM Air-Conditioning Trainer Uses actual automotive Suitable for both technician and vocational teaching Portable design Uses non-ozone depleting HFC refrigerant Enables hands-on access to all Simulates four common faults Variable speed motor simulates car engine Available for either 110 V or 230 V mains connection Feedback Instruments automotive air conditioning trainer enables students to understand the operation of a typical system whilst learning the principles of refrigeration. By using authentic, students learn how to perform fault finding and servicing using a safe and accessible system. The product has been designed specifically with hands-on training in mind and can also be used by students to perform the safe recovery and recharging of refrigerant. A digitally controlled electric motor simulates the vehicle engine, therefore making the unit ideal for the classroom training environment. Complete with compressor, condenser, receiver dryer, expansion valve and evaporator, the unit is pre-installed with R134a type refrigerant. The system is furnished with high and low-side pressure service ports that facilitate connection of an optional gauge set or for the recovery and re-charging of refrigerant. Subject Areas The fundamentals of refrigeration The vapour compression cycle Refrigerant handling system fault diagnosis Air conditioning installation, servicing and repair controls - 100 -

39-306 SYSTEM Air Conditioning Trainer Feedback Instruments Air Conditioning and Heat Pump Demonstrator is a genuine commercial air conditioner built onto a rigid frame for bench or floor mounting. The unit will demonstrate the principles of air conditioning, reverse cycle heat pump technology and refrigeration. The unit comes ready to run pre-charged with environ mentally friendly non-polluting R404a refrigerant. The front and top panels of the outdoor unit are sectioned, illuminated and have a transparent covering to enable observation of the internal and electronic PCB. Students can carry out the following exercises: system pump down, recovery of the refrigerant charge, pressure testing, evacuating and recharging. The system can also be used as a model to teach air conditioning installation considering location, mounting and electrical connection. Subject Areas The fundamentals of refrigeration The principle of heat pumps The vapour compression cycle Refrigerant handling Setting refrigeration controls system fault diagnosis Air conditioning installation, servicing and repair Uses commercial grade Suitable for technician training Portable design permits on-site training Unit is pre-charged with non-ozone depleting refrigerant (R404a) Open frame design allows hands-on access to all areas Can be used to teach refrigerant handling skills Available for either 110 V or 230 V mains supply Teaching material supplied - 101 -

39-307/39-308 39-307 & Air conditioning Controls Simulator 39-307 Commercial and Air-Conditioning Controls Skills Trainer - This trainer is an authentic, self-contained bench mounted small refrigeration system complete with thermostat, pressure controls and fans. The system teaches students how to diagnose common faults with refrigeration controls and wiring as well as how to set up and calibrate the controls correctly. There are fifteen faults for the student to trace using a multi-meter and the provided wiring diagram. The unit is supported by manuals that explain how to trace each fault and set up the controls. Includes complete refrigeration circuit Diagnosis of common faults Uses R134a non-ozone depleting refrigerant Suitable for on-site technician training Teaching material and digital multi-meter supplied 39-308 Hermetic Compressor Fault simulator 39-308 Hermetic Compressor Fault Simulator - Feedback Instruments' Hermetic Compressor Fault Simulator is a bench mounted unit designed to enable students and technicians to diagnose common electrical faults associated with small single-phase hermetic refrigeration compressors. There are a total of fifteen faults that can be assigned to the unit by push - 102 - button and these can be traced by the student by following and using the multi-meter and supplied manual. The unit is charged with N2 OFN and is completely non-polluting. Simulates common compressor faults Uses N2 OFN non-ozone depleting refrigerant Suitable for on-site technician training Uses commercial grade Teaching material supplied Supplied with digital multi-meter and current clamp meter

39-310 SYSTEM Chilled Water Trainer Feedback Instruments Chilled Water Air Conditioning Skills Trainer is a complete water chiller plant consisting of water chiller, primary circuit and secondary circuit. It can be used to demonstrate the principles of chilled water systems but can also be used as a training aid in the selection of chilled water equipment and the setting up and commissioning of chilled water systems. There is also an optional 1 Hr DVD available to support this product. The rig is supplied with a training manual that has balancing exercises for the students. The unit is designed to fit through a pair of standard swing double doors if the cassette unit and top frame is removed. The cassette unit is coupled onto the hydronic system via two self-sealing couplers, to allow the cassette to be removed without loss of glycol in the system. The top frame is also easily removable to allow the rig to be moved through a standard double door. The system has one fixed speed pump housed inside water chiller unit. It also has additional dummy circuits that can be used to carry out flow experiments. primary and secondary circuits Covers principles of cold water a.c. Suitable for technician training Portable design permits on-site training Teaching material supplied Introduction to chilled water systems - 103 -