CONTENTS Microbalances MXA/1.......................................... 3 Microbalances MXA/F.......................................... 4 Analytical balances XA......................................... 5 Analytical balances XA/X........................................ 6 Analytical balances WAS/X....................................... 7 Analytical balances AS/X......................................... 8 Analytical balances AS.......................................... 9 Precision balances WPX........................................ 10 Precision balances WPX/G....................................... 11 Precision balances WLX........................................ 12 Precision balances WTX........................................ 13 Precision balances PS/C/2....................................... 14 Precision balances PS/C/1....................................... 15 Precision balances WLC/C/2...................................... 16 Precision balances WLC........................................ 17 Precision balances APP/X....................................... 19 Precision balances APP/C....................................... 20 Precision balances WTB........................................ 21 Jeweller's balances PS/CT....................................... 22 Jeweller's balances AS/CT....................................... 23 Pharmaceutical balances WXD..................................... 24 Pharmaceutical balances WPX..................................... 25 Pharmaceutical balances PS/C2.................................... 26 Pharmaceutical balances PS/C1.................................... 27 Moisture analyzers MAC........................................ 28 Moisture analyzers MAX........................................ 29 Mass comparators WAX 21/KO..................................... 30 Mass comparators WAX 210-5100/KO................................. 31 Mass comparators WPP 21/KO..................................... 32 Mass comparators HX 510-2100/KO.................................. 33
MICROBALANCES MXA/1 MXA/1 series of balances has been designed to meet high requirements for measuring small masses with high readability. They are equipped with graphic display with extended user menu. In order to guarantee proper accuracy of measurements, has been applied automatic system of calibration. M i c r o b a l a n c e c o n s i s t s o f t w o components. One of them contains electronic modules, and the other precise mechanical measuring system. Such a solution guarantees elimination of temperature changes influencing the indications of the micro balance. Balances are equipped with esthetic, cylindrical shaped weighing chamber with small glass draught shield. All elements of the weighing chamber are manufactured from glass or metal which minimalizes the influence of electrostatic charges on weighing result. Microbalance is equipped with user friendly menu. User has access to multiple functions and measuring units which allow for specification of working requirements. Microbalance software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Balance series MXA is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard. GLP Filling Statistics Air Buoyancy Correction Infrared sensors Pipette calibration GLP procedures Microbalances MXA/1 series is equipped with infrared sensors enabling opening of measuring chamber door and activating user defined functions of tare or printout. o 95 80 173 95 210 335 370 Weighing chamber dimensions Stabilization time Calibration MXA 5/1 5 g 1 µg 2 µg ±3 µg MXA 11/1 11 g 1 µg 3 µg ±5 µg MXA 21/1 21 g 1 µg 5 µg ±10 µg ø 30 mm ø 90 90 mm 20 s automatic (internal) +18 - +30 C MXA 31/1 31 g 1 µg 5 µg ±10 µg ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTERS KAFKA PRINTERS KYOLINE FOOT BUTTON FOR TARE OR PRINT FUNCTIONS COMPUTER SOFTWARE: PW-WIN, RAD-KEY, REC-FS
MICROBALANCES MXA/F MXA/F series of balances has been designed to meet high requirements for measuring small masses with high readability (d = 1 µg). They are equipped with graphic display with extended user menu. In order to guarantee proper accuracy of measurements, has been applied automatic system of calibration. M i c r o b a l a n c e c o n s i s t s o f t w o components. One of them contains electronic modules, and the other precise mechanical measuring system. Such solution guarantees elimination of temperature changes influencing the indication of the micro balance. Microbalances series MXA/F are offered with one capacitie - 5g, (with readability 1 µg.). Balances are equipped with esthetic, cylindrical shaped weighing chamber with aluminum draught shield. All elements of the weighing chamber are manufactured from glass or metal which minimalizes the influence of electrostatic charges on weighing result. Microbalance is equipped with user friendly menu. User has access to multiple functions and measuring units which allow for specification of working requirements. Microbalance software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Balance series MXA is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard. Filling Statistics Air Buoyancy Correction o 130 160 80 210 335 360 Weighing chamber dimensions Stabilization time Calibration MXA 5/F 5 g 1 µg 2 µg ±3 µg o 100 mm o 118 50 mm 20 s automatic (internal) +18 - +30 C ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTERS: KAFKA 1 MICROBALANCE SHIELD FOOT BUTTON FOR TARE OR PRINT FUNCTIONS COMPUTER SOFTWARE: PW-WIN, RAD-KEY, REC-FS
ANALYTICAL BALANCES XA XA series presents the professional level of analytical balances. This balance is equipped with backlit graphic display with extended user menu. The accuracy of measurement is guaranteed by automatic internal calibration dependant on time and temperature changes. Analytical balances series XA are offered with following capacities: -100, 160, 220, 310 g (readability 0,); -100 g and 210 g (readability 0,0); -60/220 g (readability 0,01/0, - moveable fine range). Advantages of XA series is possibility of creation of GLP procedures as standard printout and freely definable user printout. User has access to big weighing chamber with two sliding glass side doors and sliding top glass door. Each scale is equipped with RS 232, PS/2 output and additional display output as standard. The quality of balances series XA has been confirmed by European certificate EC type Approval. Balances have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. Filling Animal weighing Statistics Formulation Air buoyancy correction Minimal load Sensitivity drift Calibration XA 110 100 g 0,0-100 g 0,025 mg ±0,05 mg XA 210 210 g 0,0-210 g 0,03 mg ±0, XA 60/220 60/220 g 0,01/0, -220 g 0,02/0, ±0,05/0,2 mg XA 100 100 g 0, -100 g +10 - +50 C 0, ±0,2 mg XA 160 160 g 0, -160 g 0, ±0,2 mg XA 220 220 g 0, -220 g 0, ±0,2 mg XA 310 310 g 0, -310 g 0,2 mg ±0,3 mg 2 ppm/ C in temperature +18 - +30 C internal (automatic) o 85 mm o 85 mm o 85 mm o100 mm o100 mm o100 mm o100 mm ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTER KAFKA PRINTER EPSON DENSITY KIT FOR SOLIDS AND LIQUIDS PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS ADDITIONAL LCD DISPLAY EXTERNAL RECHARGEABLE BATTERY WITH CHARGER COMPUTER SOFTWARE: PW-WIN 2004 COMPUTER SOFTWARE: RAD-KEY 2000
ANALYTICAL BALANCES XA/X * XA/X balances are equipped with big backlit graphic display with extended menu, 12-keys membrane keyboard, big weighing chamber with sliding upper glass door and side glass door. Balance accuracy is guaranteed by automatic internal calibration dependant on time and temperature changes. Balances have possibility of disconnecting the head from weighing chamber. This solution considerably reduces vibrations transferred to weighing chamber and decreases dimensions of device. Filling Animal weighing XA/X balances enable to generate GLP procedures, these balances have RS 232 socket, PS/2, possibility of connecting additional display and possibility of weighing loads outside the main weighing platform (so called under-hook weighing). Statistics XA/X series- professional level analitycal balances New electronics and technological solutions! New intuitive operation and user friendly software of balances! Formulation Air buoyancy correction Pipette calibration GLP GLP procedures 167 228 190 161 Under-hook weighing 222 294 285 202 484 Minimal load Sensitivity driftt Output signal Calibration XA 110/X * 100 g 0,0-100 g 0,025 mg ±0,05 mg 85 mm XA 210/X * 210 g 0,0-210 g 0,03 mg ±0, 85 mm XA 60/220/X * 60/220 g 0,01/0, -220 g 0,02/0, ±0,05/0,2 mg XA 100/X * 100 g 0, -100 g +10 - +50 C 0, ±0,2 mg XA 160/X * 160 g 0, -160 g 0, ±0,2 mg XA 220/X * 220 g 0, -220 g 0, ±0,2 mg XA 310/X * 310 g 0, -310 g 0,2 mg ±0,3 mg 2 ppm/ C in temperature +18 - +30 C RS 232 internal (automatic) 85 mm 100 mm 100 mm 100 mm 100 mm * balances verified from december 2008. ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTER KAFKA PRINTER KYOLINE PRINTER EPSON DENSITY KIT FOR SOLIDS AND LIQUIDS PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS ADDITIONAL LCD DISPLAY EXTERNAL RECHARGEABLE BATTERY WITH CHARGER COMPUTER SOFTWARE: PW-WIN 2004 COMPUTER SOFTWARE: RAD-KEY 2000
ANALYTICAL BALANCES WAS/X WAS/X series represents professional level of analytical balances. It is equipped with big backlit display with extended menu. Accuracy of balances is guaranteed by automatic internal calibration, depending on time and temperature changes. Analytical balances series WAS/X are offered with capacities 110, 160 and 220 g with readability of 0,1mg. Advantages of balances series WAS/X are possibility of generation of GLP procedures as standard printout or freely adjustable printout. User can perform measures in big weighing chamber equipped with sliding doors and sliding top glass. Each balance has RS 232, PS/2 output and possibility of connection of additional display as standard. Quality of balances series WAS/X has been confirmed by European certificate EC Type Approval. Balances have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. Filling Animal weighing Statistics Formulation 172 172 335 230 335 210 Minimal load Sensitivity drift Calibration WAS 110/X 110 g 0, -110 g WAS 160/X 160 g 0, -160 g +18 - +30 C 0,2 mg ±0,3 mg 2 ppm/ C in temperature +15 - +35 C internal (automatic) 85 mm WAS 220/X 220 g 0, -220 g Anti-vibration table (mild steel or stainless steel) Printers: KAFKA 1, KAFKA 1Z, KAFKA SQ Printer EPSON: TM-U220D, TM-U220B, TM-U220A kit for solids and liquids Rack for under-hook weighing PS/2 keyboard External TARE or PRINT keys operated by feet Additional LCD display External rechargeable battery with charger Computer software: PW-WIN 2004, RAD-KEY 2000
ANALYTICAL BALANCES AS/X Balances series AS/X represent standard level of analytical balances. They are equipped with backlit graphic display. Accuracy and precise measurement of the balances are determined by automatic internal calibration, dependant on time and temperature changes. Analytical balances AS/X series are offered with following capacities: 110, 160, 220, 310 g with readability of 0,, 60 g with readability of 0,0 and 60/220 g with readability of 0,01/0,. AS/X balances are equipped with optional pipette calibration as well as automatic door opening system. GLP procedure of these balances is a report from calibration process of the balance, and this information has unchangeable shape (no modification possible). User has access to big measuring chamber with sliding doors and sliding top glass. Each balance is equipped with RS 232 output and possibility of connection of additional display as standard. Balances are equipped with possibility of weighing loads outside the main weighing platform (so called under hook weighing). This means of mass measuring is an alternative for loads with non-standard dimensions and shapes and those which create magnetic field. Under hook weighing is also applied for density procedures. Filling Animal weighing Statistics Formulation 172 172 335 230 335 210 Minimal load Sensitivity drift Calibration AS 110/X 110 g 0, -110 g 0, ± 0,3 mg 85 mm AS 160/X 160 g 0, -160 g +10 - +45 C 0,15 mg ± 0,3 mg AS 220/X 220 g 0, -220 g 0,15 mg ± 0,3 mg 2 ppm/ C in temperature +15 - +35 C internal (automatic) 85 mm 85 mm AS 310/X 310 g 0, -310 g 0,2 mg ± 0,3 mg 85 mm ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTERS: KAFKA 1, KAFKA 1Z, KAFKA SQ PRINTER EPSON: TM-U220D, TM-U220B, TM-U220A DENSITY KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER-HOOK WEIGHING ADDITIONAL LCD DISPLAY EXTERNAL RECHARGEABLE BATTERY WITH CHARGER COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000
ANALYTICAL BALANCES AS Balances series AS represent standard level of analytical balances. They are equipped with backlit LCD display. Accuracy and precise measurement of the balances are determined by internal calibration, dependant on time and temperature changes. Analytical balances AS series are offered with following capacities: 110, 160, 220, 310 g with readability of 0,1 m g and 60/220 with readability 0,1/0,0 and 100 g with readability 0,0. GLP procedure of these balances is a report from calibration process of the balance, and this information has unchangeable shape (no modification possible). User has access to big measuring chamber with sliding doors and sliding top glass. Each balance is equipped with RS 232 output and possibility of connection of additional display as standard. Balances have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. 172 172 335 230 335 210 Minimal load Sensitivity drift Calibration AS 60/C/2 60 g 0,0-60 g 0,02 mg ± 0,05 mg AS 60/220/C/2 60 g/220 g 0,0/0, -220 g 0,02/0, ± 0,05/0,2 mg AS 110/C/2 110 g 0, -110 g +10 - +45 C 0, ± 0,3 mg AS 160/C/2 160 g 0, -160 g 0,15 mg ± 0,3 mg 2 ppm/ C in temperature +15 - +35 C internal (automatic) 85 mm AS 220/C/2 220 g 0, -220 g 0,15 mg ± 0,3 mg AS 310/C/2 * 310 g 0, -310 g 0,2 mg ± 0,3 mg * non-verified balance ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTERS: KAFKA 1, KAFKA 1Z, KAFKA SQ PRINTER EPSON: TM-U220D, TM-U220B, TM-U220A DENSITY KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER-HOOK WEIGHING ADDITIONAL LCD DISPLAY EXTERNAL RECHARGEABLE BATTERY WITH CHARGER COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000
PRECISION BALANCES WPX WPX series constitute for two groups of balances for which the main common feature is big graphic backlit display with extender user menu. Accuracy of balances is guaranteed by automatic internal calibration, depending on time and temperature changes. First group of balances is equipped with weighing pan 128 128 mm, small glass draft shield, and readability of 1 mg. an option for these balances is glass draft shield with sliding doors, which substantially improves working conditions, particularly in case of breeze. Second group of balances is equipped with weighing pan 195 195 mm and readability. Scales have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. Filling Animal weighing Statistics Formulation Minimal load Sensitivity drift Calibration WXD 200/2000 2000 g 0,02 g 0,001/0,01 g -2000 g 0,01/0,01 g ±0,002/0,01 g 128 128 mm WPX 250 250 g 0,02 g 0,001 g -250 g 0,001 g ±0,002 g 128 128 mm WPX 450 450 g 0,02 g 0,001 g -450 g 0,001 g ±0,002 g WPX 650 650 g 0,02 g 0,001 g -650 g +15 - +30 C 0,001 g ±0,002 g WPX 1500 1500 g 0,5 g 0,01 g -1500 g 2 ppm/ C in temperature +18 - +30 C internal (automatic) 128 128 mm 128 128 mm 195 195 mm WPX 2500 2500 g 0,5 g 0,01 g -2500 g WPX 4500 4500 g 0,5 g 0,01 g -4500 g 0,01 g 0,01 g 0,01 g ±0,02 g ±0,002 g195 195 mm5 ±0,02 mm g195 195 mm5 mm ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
BALANCES FOR CEREALS DENSITY WPX/G 5 4 2 1 3 6 1.base for measuring container 2.measuring container of 1l volume 3.knife 4.ring 5.filling device 6.charging vessel WPX/G balances is designed for density of grains. They are equipped with system of automatic internal calibration, 195 195 mm weighing pan and big backlit graphic display with extender user menu. The density of grains in loose form is performer with application of precision balance series WPX 4500/G and a density measuring device of 1l volume. The density is calculated automatically by the software of balance (in accordance to tables for density measuring devices for grains). can be performed for following grains: wheat, oats, barley, rye. Balance, as a precise measuring device is equipped with control procedures complying with ISO/GLP, memory with high capacity (reduction tables for grains), possibility of cooperation with printer or computer. Advantages of balances series WPX are possibility of generation of GLP procedures Balances are equipped with RS 232, PS/2 output and possibility of connection of additional display as standard. Scales have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. 88 165 Filling Animal weighing Statistics Formulation Minimal load Calibration Display WPX 4500/G 4500 g 0,5 g 0,01 g -4500 g 0,02 g ±0,02 g195 195 mmm +15 - +30 C internal (automatic) graphic (backlit) DENSITY DETERMINATION KIT FOR GRAINS: ANTI-VIBRATION TABLE (MILD STEEL OR STAINLESS STEEL) PRINTERS: KAFKA 1, KAFKA 1Z, KAFKA SQ PRINTER EPSON: TM-U220D, TM-U220B, TM-U220A CITIZEN LABEL PRINTER PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING ADDITIONAL LCD DISPLAY EXTERNAL RECHARGEABLE BATTERY WITH CHARGER SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
PRECISION BALANCES WLX Balances series WLX are offered with capacities from 6 to 120 kg and readabilities 0,1-2 g. They are offered with graphic display, RS 232, and computer keyboard PS/2 output as standard equipment of this balance. There is also possibility of connection of an additional display. Filling Animal weighing Statistics Formulation 300 400 400 500 400 300 500 400 291 393 310 419 346 493 368 519 346 493 368 519 291 393 310 419 Stabilization time Display WLX 6/12/C1/R WLX 6/12/C1/K 6/12 kg 0,1/0,2 g -12 kg 0,2/0,4 g ±0,2/0,4 g 290 360 mm WLX 12/30/C1/R WLX 12/30/C1/K 12/30 kg 0,2/0,5 g -30 kg 0,4/1 g ±0,4/1 g 2 s +15 - +30 C graphic (backlit) WLX 30/60/C2/R WLX 60/120/C2/R WLX 30/60/C2/K WLX 60/120/C2/K 30/60 kg 60/120 kg 0,5/1 g 1/2 g -60 kg -120 kg 1/2 g 2/4 g ±1/2 g ±2/4 g 400 500 mm "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER PC KEYBOARD PS/2 RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
PRECISION BALANCES WTX Balances series WTX are dual range weighing instruments, which allow for of mass with high resolution in first and second weighing range. All of WTX balances are equipped with stainless steel weighing pan and backlit graphic display providing good reading of weighing indications. Weighing part of this series of balances is a load cell class C3 (d=e=3000). Each balance series WTX is equipped with RS 232 and RS485 outputs, PS/2 socket and additional LCD display plug. Advantages of WTX series is possibility of generating GLP reports as standard and non standard, freely definable shape. Balances series WTX have option of implementing special software (for labeling or counting and labeling) with extended structure of data bases. Data base capacity for labeling software: 2000 assortments, 100 operators, 1000 labels, 500 contractors. Data base capacity for counting and labeling software: 2500 assortments, 100 operators, 1000 labels. Filling Animal weighing Statistics Formulation WTX range is offered with possibility of weighing loads under the weighing pan, so called under hook weighing. It is an alternative for weighing loads with non standard dimensions, and those creating magnetic field. This means of weighing is also used in case of density procedure. * Display WTX 0,6/1,5/A2 0,6/1,5 kg 0,2/0,5 g -1,5 kg 0,2/0,5 g ± 0,2/0,5 g WTX 1,5/3/A2 1,5/3 kg 0,5/1 g -3 kg 0,5/1 g ± 0,5/1 g 195 195 mm 0 - +40 C graphic (backlit) WTX 3/6/A2 3/6 kg 1/2 g -6 kg 1/2 g ±1/2 g * repeatability conceived as standard deviation PRINTERS: KAFKA 1, KAFKA 1Z, KAFKA SQ PRINTER EPSON: TM-U220D, TM-U220B, TM-U220A PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING ADDITIONAL LCD DISPLAY COMPUTER SOFTWARE: PW-WIN 2005 COMPUTER SOFTWARE: RAD-KEY 2000
PRECISION BALANCES PS/C2 Balances series PS are equipped with 12 key front panel and LCD backlit display. Pan dimension is this series is 195 195 or 128 128 mm with a glass shield over the weighing pan which protects the load against possible breeze. Each balance has RS 232 and additional display outputs as standard. GLP procedure is available in a form of a report from balance calibration. shape of the printout is modifiable. User name, project name, print of date and time, and print frame are user defined on printout. Balances marked as C/2 are equipped with system of internal automatic calibration. Summing function Balances are equipped with optional weighing of loads outside the weighing pan, so called under hook weighing. it is an alternative for weighing loads with non standard dimensions or made of magnetic substances. Under hook weighing is additionally applied in case of density procedure. Minimal load PS 200/2000/C/2 200/2000 g 1/ -2000 g 1/ ±2/ PS 110/C/2* 110 g -110 g ±2 mg PS 210/C/2* 210 g -210 g ±2 mg PS 360/C/2* 360 g -360 g ±2 mg PS 600/C/2* 600 g -600 g ±2 mg PS 750/C/2 750 g -750 g 1,5 mg ±3 mg PS 1000/C/2 1000 g -1000 g 1,5 mg ±3 mg Sensitivity drift 128 128 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C * verified balances Minimal load PS 1200/C/2* 1200 g 500 mg -1200 g PS 2100/C/2* 2100 g 500 mg -2100 g PS 3500/C/2* 3500 g 500 mg -3500 g PS 4500/C/2* 4500 g 500 mg -4500 g PS 6000/C/2* 6000 g 500 mg -6000 g ± ± ± ± 15 mg ± Sensitivity drift 195 195 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C * verified balances ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000 R A D W A G 2 6-6 0 0 a dr o m B ra c k a S t r e e t P2O 8L A N DP h o n e : + 4 8 4 8 3 8 4Fa 8 x 8 : 0 0+ 4 8 4 8 3 8 5 0w 0w1 w. 0ra d w a g. c o m e - m a i l : e x p oa rd t w@ arg. c o m
PRECISION BALANCES PS/C1 Balances series PS are equipped with 12 key front panel and LCD backlit display. Pan dimension is this series is 195 195 or 128 128 mm with a glass shield over the weighing pan which protects the load against possible breeze. Each balance has RS 232 and additional display outputs as standard. GLP procedure is available in a form of a report from balance calibration. shape of the printout is modifiable. User name, project name, print of date and time, and print frame are user defined on printout. Balances marked as C/1 are equipped with system of external calibration. Summing function Balances are equipped with optional weighing of loads outside the weighing pan, so called under hook weighing. it is an alternative for weighing loads with non standard dimensions or made of magnetic substances. Under hook weighing is additionally applied in case of density procedure. Minimal load PS 200/2000/C/1 200/2000 g 1/ -2000 g 1/ ±2/ PS 60/C/1* 60 g -60 g ±2 mg PS 110/C/1* 110 g -110 g ±2 mg PS 210/C/1* 210 g -210 g ±2 mg PS 360/C/1 360 g -360 g ±2 mg PS 510/C/1 510 g -510 g ±2 mg PS 750/C/1 750 g -750 g 1,5 mg ±3 mg PS 1000/C/1 1000 g -1000 g 1,5 mg ±3 mg Sensitivity drift 128 128 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C * verified balances Minimal load PS 600/C/1* 600 g 500 mg -600 g ± PS 1200/C/1* 1200 g 500 mg -1200 g ± PS 2100/C/1* 2100 g 500 mg -2100 g ± PS 3500/C/1 3500 g 500 mg -3500 g ± PS 4500/C/1 4500 g 500 mg -4500 g ± PS 6000/C/1 6000 g 500 mg -6000 g 15 mg ± Sensitivity drift 195 195 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C * verified balances ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000
PRECISION BALANCES WLC C/2 Balances series WLC C/2 are designed for fast and precise mass in laboratory and industrial conditions. They can also be used in areas with no access to mains (230V), as their standard equipment they includes internal rechargeable battery and RS 232 output. All kinds of this balance (pan size: 128 128, and 195 195 mm) are equipped with stainless steel weighing platform and backlit LCD display providing good reading of weighing result. Balances have possibility of weighing loads outside weighing platform (so called under hook weighing). where a load is hanged under the instrument. This is an alternative for weighing loads with non-standard dimensions and shapes. This means of weighing is also useful for of density of solids and liquids with application of standard functions of the balance. Caps lock of max indication Measurement in Newton A1 version A2 version WLC 0,6/A1/C/2 Calibration Stabilization time Display 0,6 kg 0,01 g -0,6 kg 0,02 g ±0,2 g 128 128 mm WLC 1/A2/C/2 WLC 1,2/A2/C/2 * 1 kg 0,01 g -1 kg 0,03 g ±0,03 g 1,2 kg 0,02 g -3 kg 0,02 g ± 0,02 g 195 195 mm, and accumulator internal (automatic) 3 s +15 - +30 C LCD (backlit) WLC 3/A2/C/2 * 3/6 kg 0,05 g -6 kg 0,05 g ± 0,05 g WLC 6/A2/C/2 * 6 kg 0,1 g -6 kg 0,2 g ±0,2 g * verified balances "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
PRECISION BALANCES WLC Balances series WLC are designed for fast and precise mass in laboratory and industrial conditions. They can also be used in areas with no access to mains (230V), as their standard equipment they includes internal rechargeable battery and RS 232 output. All kinds of this balance (pan size: 128 128, 125 145, 195 195, 290 360 and 400 500 mm) are equipped with stainless steel weighing platform and backlit LCD display providing good reading of weighing result. Balances WLC A2 have possibility of weighing loads outside weighing platform (so called under hook weighing). where a load is hanged under the instrument. This is an alternative for weighing loads with non-standard dimensions and shapes. This means of weighing is also useful for of density of solids and liquids with application of standard functions of the balance. Caps lock of max indication Measurement in Newton WLC 0,6/B1* WLC 1,2/B1* WLC 1/A2 WLC 1,2/3/A2* WLC 2/A2 WLC 3/6/A2* WLC 6/A2 Stabilization time Display Stabilization time Display 0,6 kg 0,01 g -0,6 kg 0,01 g ±0,01 g 1,2 kg 0,02 g -1,2 kg 0,02 g ±0,02 g 125 145 mm 1,2/3 kg 0,02/0,05 g -3 kg 0,02/0,05 g ± 0,02/0,05 g, and accumulator 3 s 3/6 kg 0,05/0,1 g -6 kg 0,05/0,1 g ± 0,05/0,1 g +15 - +30 C LCD (backlit) 195 195 mm, and accumulator 3 s +15 - +30 C LCD (backlit) WLC 6/12/A2* 6/12 kg 0,1/0,2 g -12 kg 0,1/0,2 g ± 0,1/0,2 g WLC 6/C1/R WLC 6/12/C1/R* WLC 12/C1/R WLC 12/30/C1/R* WLC 30/C1/R WLC 30/60/C2/R* WLC 60/C2/R WLC 60/120/C2/R* WLC 120/C2/R WLC 6/C1/K WLC 6/12/C1/K* WLC 12/C1/K WLC 12/30/C1/K* WLC 30/C1/K WLC 30/60/C2/K* WLC 60/C2/K WLC 60/120/C2/K* WLC 120/C2/K 6 kg 0,1 g -6 kg 0,3 g ±0,3 g 6/12 kg 0,1/0,2 g -12 kg 0,1/0,2 g ± 0,1/0,2 g 1 kg 0,01 g -1 kg 0,03 g ±0,03 g 12 kg 0,2 g -12 kg 0,6 g ±0,6 g 12/30 kg 0,2/0,5 g -30 kg 0,2/0,5 g ± 0,2/0,5 g "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" RACK FOR UNDER HOOK WEIGHING SUITCASE FOR BALANCE COMPUTER SOFTWARE PW-WIN 2005, RAD-KEY 2000, REC-FS 2000 2 kg 0,01 g -2 kg 0,03 g ±0,03 g 30 kg 0,5 g -30 kg 1,5 g ±1,5 g 30/60 kg 0,5/1 g -60 kg 0,5/1 g ± 0,5/1 g 290 360 mm 400 500 mm 6 kg 0,1 g -6 kg 0,2 g ±0,2 g 60 kg 1 g -60 kg 3 g ±3 g WLC 10/A2 WLC20/A2 60/120 kg 1/2 g -120 kg 1/2 g ± 1/2 g 10 kg 0,1 g -10 kg 0,2 g ±0,2 g 20 kg 0,1 g -20 kg 0,2 g ±0,2 g * verified balances 120 kg 2 g -120 kg 6 g ±6 g * verified balances
B1 version A2 version 125 145 291 393 310 419 346 493 368 519 78 160 130 244 174 /K version /R version 300 400 400 500 400 300 500 400 346 493 368 519 291 393 310 419
PRECISION BALANCES APP/X Precision balances series APP/X are offered in two solutions, weighing platform dimensions either 300 250 mm or 285 365 mm. Depending on the type, balances are equipped with backlit graphic display. Each series of APP/X balances is offered with following capacities: 8 and 25 kg. Independently on version, APP/X balance is based on electromagnetic measuring system, external calibration (internal for scales X/2) and RS 232 output. Balance casing is made of aluminum, weighing pan is in stainless steel technology. Balances series APP have under hook weighing as standard solution. Filling Animal weighing Statistics Formulation 365 ~140 120 405 285 300 250 Reapatability Operation time Calibration weight Display APP 8/X APP 8/X/2 8 kg 0,01 g -8 kg 0,01 g ± 0,02 g APP 25/X APP 25/X/2 25 kg 0,1 g -25 kg 0,1 g ± 0,1 g 300 250 mm 365 285 mm +15 - +40 C 3 s 5 kg 10 kg LCD (backlit) "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER * PC KEYBOARD PS/2 * FOOT BUTTON FOR TARE OR PRINT FUNCTIONS * LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK CALIBRATION WEIGHT COMPUTER SOFTWARE: PW-WIN 2005 COMPUTER SOFTWARE: RAD-KEY 2000 *except for balances with LCD display
PRECISION BALANCES APP/C Precision balances series APP/C are offered in two solutions, weighing platform dimensions either 300 50 mm or 285 365 mm. Depending on the type, balances are equipped with backlit LCD display. Each series of APP/C balances is offered with following capacities: 8, 25, 30 and 6/35 kg. Independently on version, APP/C balance is based on electromagnetic measuring system, external calibration (internal for scales C/2) and RS 232 output. Balance casing is made of aluminum, weighing pan is in stainless steel technology. Balances series APP have under hook weighing as standard solution. 365 ~140 120 285 405 300 250 Reapatability Operation time Calibration weight Display APP 8/C APP 8/C/2 8 kg 0,01 g -8 kg 0,01 g ± 0,02 g 300 250 mm 5 kg APP 25/C APP 25/C/2 * 25 kg 0,1 g -25 kg 0,1 g ± 0,1 g APP 30/C - 30 kg 0,1 g -30 kg 0,2 g ± 0,3 g 365 285 mm +15 - +40 C 3 s 10 kg 10 kg LCD (backlit) APP 6/35/C APP 6/35/C * 6/35 kg 1/5 g -35 kg 1/5 g ±1/5 g 10 kg * verified balances "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK CALIBRATION WEIGHT COMPUTER SOFTWARE: PW-WIN 2005 COMPUTER SOFTWARE: RAD-KEY 2000
PRECISION BALANCES SERIES WTB WTB balances are designed for fast and precise of mass in laboratory conditions. They can be used in locations where no power (230V) is accessible as they are equipped with internal rechargeable battery. Balances are equipped with stainless steel weighin pan, RS 232 output and backlit LCD display. Weighing animals Summing function +/- control Peak hold of maximal indication ř 115 78 78 160 130 244 174 125 145 160 130 244 174 Maximal capacity Display WTB 200 200 g 0,001 g -200 g 0,003 g ±0,003 g +15 - +30 C and 6 AA NiMH accumulator 115 mm WTB 2000 2000 g 0,01 g -2000 g 0,03 g ±0,03 g 125 145 mm LCD (backlit) WTB 3000 3000 g 0,01 g -3000 g 0,03 g ±0,03 g 125 145 mm RACK FOR HEAD LCD ADDITIONAL DISPLAY "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" TABLE FOR SCALE EXTERNAL RECHARGEABLE BATTERY PACK COMPUTER SOFTWARE: PW-WIN, RAD-KEY, REC-FS, LS-FS RS 232/RS 485 CONVERTER EXTERNAL POWER OUTPUT
JEWELLERY BALANCES PS Jewellery balances series PS are equipped with backlit LCD display and weighing pan 128 128 mm with glass draught shield and readability. Second group of jewelerry balances has weighing pan 195 195 mm and readability 10 mg. GLP procedure of these balances is a report from calibration process of the balance, and this information has unchangeable shape. Each balance is equipped with RS 232 output. Balances are equipped with possibility of weighing loads outside the main weighing platform (so called under hook weighing). This means of mass measuring is an alternative for loads with non-standard dimensions and shapes and those which create magnetic field. Under hook weighing is also applied for density procedures. Minimal load Reapatability Sensitivity drift Display PS 510/C/1/CT PS 510/C/2/CT PS 2100/C/1/CT PS 2100/C/2/CT 510 g / 2550 ct 2100 g / 10500 ct 0,02 g / 0,1 ct 0,5 g / 2,5 ct 0,001 g / 0,005 ct 0,01 g / 0,05 ct -510 g / -2550 ct 2100 g / -10500 ct 0,001 g / 0,005 ct 0,01 g / 0,05 ct ±0,001 g / 0,005 ct ±0,01 g / 0,05 ct 128 128 mm 195 195 mm 2 ppm/ C in temperature +15 - +35 C +15 - +30 C LCD (backlit) ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000
JEWELLERY BALANCES AS Analytical balances AS series are offered with following capacities: 140 g, 240 g and 320 g with readability of 0,2 mg. They are equipped with anti breeze draught shield with sliding glass doors and backlit LCD display. These balances have system of internal automatic calibration (C2 version) activated on time and temperature changes. Balances are equipped with possibility of weighing loads outside the main weighing platform (so called under hook weighing). This means of mass measuring is an alternative for loads with non-standard dimensions and shapes and those which create magnetic field. Under hook weighing is also applied for density procedures. Summing function Minima load Reapatability Sensitivity drift Calibration AS 140/C/1/CT AS 140/C/2/CT * 140 g / 700 ct 0,004 g / 0,02 ct 0,0002 g / 0,001 ct -140 g / -700 ct 0,0002 g / 0,001 ct ±0,0002 g / 0,001 ct AS 240/C/1/CT AS 240/C/2/CT * 240 g / 1200 ct 0,004 g / 0,02 ct 0,0002 g / 0,001 ct -240 g / -1200 ct +15 - +30 C 0,0002 g / 0,001 ct ±0,0002 g / 0,001 ct 2 ppm/ C in temperature +15 - +35 C internal (C2 version) or external (C1 version) 85 mm AS 320/C/1/CT AS 320/C/2/CT * 2100 g / 10500 ct 0,004 g / 0,02 ct 0,0002 g / 0,001 ct -320 g / -1600 ct 0,0004 g / 0,002 ct ±0,0004 g / 0,002 ct * verified balances ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING SUITCASE FOR BALANCE LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000
PHARMACEUTICAL BALANCES WXD Pharmaceutical balances WXD have weighing pan 128 128 mm, big graphic, backlit display with extended user menu and readability 1mg. Accuracy of balances is guaranteed by automatic internal calibration, depending on time and temperature changes. Advantages of pharmaceutical balances series WXD is possibility of generation of GLP procedures as standard printout or freely adjustable printout. Each balance has RS 232, PS/2 output and possibility of connection of additional display as standard. Quality of balances series WXD has been confirmed by European certificate EC Type Approval. Scales have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. Filling Animal weighing Statistics Formulation Minimal load Reapatability Calibration WXD 200/2000 2000 g 0,02 g 0,001/0,01 g -2000 g 0,002/0,01 g ±0,002/0,01 g 128 128 mm +15 - +30 C internal (automatic) ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING ANTI DRAUGHT SHIELD LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
PHARMACEUTICAL BALANCES WPX Pharmaceutical balances WPX have weighing pan 195 195 mm, big graphic, backlit display with extended user menu and readability 10mg. Accuracy of balances is guaranteed by automatic internal calibration, depending on time and temperature changes. Advantages of pharmaceutical balances series WPX is possibility of generation of GLP procedures as standard printout or freely adjustable printout. Each balance has RS 232, PS/2 output and possibility of connection of additional display as standard. Quality of balances series WPX has been confirmed by European certificate EC Type Approval. Scales have possibility of weighing loads under the weighing pan, i.e. under-hook weighing. In such case the mass of load is measured under the pan. It is an alternative for loads with non-standard dimensions, shapes and loads which create magnetic field. Under-hook weighing is also applied for density of materials. Filling Animal weighing Statistics Formulation Minimal load Reapatability Calibration Display WPX 4500 4500 g 0,5 g 0,01 g -4500 g 0,02 g ±0,02 g 195 195 mmm +15 - +30 C internal (automatic) graphic (backlit) ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" CITIZEN LABEL PRINTER DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS PC KEYBOARD PS/2 FOOT BUTTON FOR TARE OR PRINT FUNCTIONS RACK FOR UNDER HOOK WEIGHING ANTI DRAUGHT SHIELD LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
PHARMACEUTICAL BALANCES PS/C2 Pharmaceutical balances series PS are equipped with 12 key front panel and LCD backlit display. Pan dimension is this series is 195 195 or 128 128 mm with a glass shield over the weighing pan which protects the load against possible breeze. Each balance has RS 232 and additional display outputs as standard. GLP procedure is available in a form of a report from balance calibration. shape of the printout is modifiable. User name, project name, print of date and time, and print frame are user defined on printout. Balances marked as C/2 are equipped with system of internal automatic calibration. Summing function Balances are equipped with optional weighing of loads outside the weighing pan, so called under hook weighing. it is an alternative for weighing loads with non standard dimensions or made of magnetic substances. Under hook Minimal load Sensitivity drift PS 110/C/2 110 g -110 g ±2 mg 128 128 mm PS 4500/C/2 4500 g 500 mg -4500 g ± 195 195 mm PS 2100/C/2 2100 g 500 mg -2100 g ± 195 195 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000 R A D W A G 2 6-6 0 0 a dr o m B ra c k a S t r e e t P2O 8L A N DP h o n e : + 4 8 4 8 3 8 4Fa 8 x 8 : 0 0+ 4 8 4 8 3 8 5 0w 0w1 w. 0ra d w a g. c o m e - m a i l : e x p oa rd t w@ arg. c o m
PHARMACEUTICAL BALANCES PS/C1 Pharmaceutical balances series PS are equipped with 12 key front panel and LCD backlit display. Pan dimension is this series is 195 195 or 128 128 mm with a glass shield over the weighing pan which protects the load against possible breeze. Each balance has RS 232 and additional display outputs as standard. GLP procedure is available in a form of a report from balance calibration. shape of the printout is modifiable. User name, project name, print of date and time, and print frame are user defined on printout. Summing function Balances are equipped with optional weighing of loads outside the weighing pan, so called under hook weighing. it is an alternative for weighing loads with non standard dimensions or made of magnetic substances. Under hook weighing is additionally applied in case of density procedure. Minimal load Sensitivity drift PS 60/C/1 60 g -60 g ±2 mg 128 128 mm PS 1200/C/1 1200 g 500 mg -1200 g ± 195 195 mm PS 110/C/1 110 g -110 g ±2 mg 195 195 mm 2 ppm/ C in temperature +18 - +30 C +15 - +30 C ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" DENSITY DETERMINATION KIT FOR SOLIDS AND LIQUIDS RACK FOR UNDER HOOK WEIGHING LCD ADDITIONAL DISPLAY EXTERNAL RECHARGEABLE BATTERY PACK SUITCASE FOR BALANCE COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000, REC-FS 2000 R A D W A G 2 6-6 0 0 a dr o m B ra c k a S t r e e t P2O 8L A N DP h o n e : + 4 8 4 8 3 8 4Fa 8 x 8 : 0 0+ 4 8 4 8 3 8 5 0w 0w1 w. 0ra d w a g. c o m e - m a i l : e x p oa rd t w@ arg. c o m
MOISTURE ANALYZER MAC Moisture analyzers are measuring devices specially designed for of moisture content of relatively small samples of various materials. Moisture analyzer MAC enables: easy access due to backlit LCD display drying profile (standard, mild, step, rapid). finish mode (manual, humidity stabilization, automatic, time defined). GLP/GMP printouts and reports halogen or infrared lamps standard and non-standard applications optimization of work due to halogen lamps mode Maximal capacity of moisture analyzer series MAC is 210 g /. Moisture content is measured with accuracy 0,01% (0,001% for samples up to 1,5g). Maximal drying temperature equals 160 C (an extra cost option is moisture analyzer for drying with temperature 250 C). 158 335 210 Reading unit Max mass of sampling Accuracy of moisture reading Drying chaber dimensions Range of drying temperature Drying modes Auto switch off options Aditional functions Power of heating device Power suply Display MAC 50/1 50 g 0, -50 g 50 g 0,01 / 0,001 % MAC 50 50 g -50 g 50 g MAC 110 110 g -110 g 110 g 120 120 20 mm o 90 mm max. 160 C (optionally max. 250 C) 4 drying modes (standard, quick, stepped, mild) 3 modes(manual, automatic, time defined) sample identification 400 W +15 - +40 C 230V AC or 120V AC LCD (backlit) 0,01 % MAC 210 210 g -210 g 210 g ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" PC KEYBOARD PS/2 DISPOSABLE PANS CONTROL TERMOMETER CALIBRATION WEIGHT COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
MOISTURE ANALYZER MAX Moisture analyzers are measuring devices specially designed for of moisture content of relatively small samples of various materials. Moisture analyzer MAX is equipped with backlit graphic display, due to which the user interface is clear and easy to use. User menu includes data base with 99 drying procedures, where each entry has its programmed name (for instance material name, its number, ID, etc). Moisture analyzer MAX enables: easy access due to backlit graphic display; standard and non-standard applications; available languages Polish, English, German, French, Spanish, Russian, Czech; communication with usage of PC keyboard; data base with 99 drying procedures; drying profile (standard, mild, step, rapid); finish mode (manual, automatic, time defined); visualization of drying process GLP/GMP printouts and reports halogen or infrared lamps Maximal capacity of moisture analyzer series MAX is 50 g /0,. Moisture content is measured with accuracy 0,01%(0,001% for samples up to 1,5g). Maximal drying temperature equals 160 C (an extra cost option is moisture analyzer for drying with temperature 250 C). 158 335 210 Reading unit Max mass of sampling Accuracy of moisture reading Drying chaber dimensions Range of drying temperature Drying modes Auto switch off options Aditional functions Power of heating device Power suply Display MAX 50/1 50 g 0, -50 g MAX 50 50 g -50 g 50 g 50 g 0,01/0,001 % (0,001 % for samples up to 1,5 g) 120 120 20 mm o 90 mm max. 160 C (optionally max. 250 C) 4 drying modes (standard, quick, stepped, mild) 3 modes (manual, automatic, time defined) sample identification, drying diagram 400 W +15 - +40 C graphic (backlit) ANTI-VIBRATION TABLE "KAFKA" THERMAL PRINTER NEEDLE PRINTER "EPSON" PC KEYBOARD PS/2 DISPOSABLE PANS CONTROL TERMOMETER CALIBRATION WEIGHT COMPUTER SOFTWARE: PW-WIN 2005, RAD-KEY 2000
MASS COMPARATOR WAX 21/KO Mass comparators are devices designed for determining the differences between masses of calibration weight (B) and reference weight (A). Comparators are most often used in measuring laboratories for calibration of weights and masses. Radwag offers comparators designed for calibration of weights and masses class E2, F1, F2, M1 according to OIML R111, with masses from 1mg to 20g with readability 1 µg. Comparator WAX21/KO consists of two components. One of them holds the electronic module, and the other precise mechanical measuring system Such solution guarantees elimination of temperature influence (warming of electronic elements) on the indications of comparator. Comparator is equipped with big graphic display with user friendly menu in Polish and English language. In order to guarantee proper accuracy of measurements, a half-automatic system of external calibration with calibration weight has been applied. Comparator is equipped with esthetic, cylindrical shaped weighing chamber with glass draught shield. All elements of the weighing chamber are manufactured from glass or metal which minimalizes the influence of electrostatic charges on weighing result. Comparator is equipped with user friendly menu. The software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Each comparator is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard. 163 111 ø 90 167 80 90 144 169 446 335 210 Comparator is in high degree influenced by external conditions like temperature, breeze and vibrations. For the purpose of proper operation conditions, it is necessary to use the comparator in a room with very precise temperature control (laminar air-conditioning) and place of usage should be free from any vibrations. Comparators do not undergo Legal Metrological Control. Main criterion if evaluation is repeatability. The software is equipped with application for estimating average deviation by two methods: ABA or ABBA, for maximally 20 repetitions. After running the procedure, the software generates the report with results. Maximal capacity Range of electromagnetic compensation Stabilization time Calibration Calibration range according to OIML R111 WAX 21/KO 21 g 1 µg 1 µg (for max= 1mg - 20mg), 3 µg (for m ax= 50mg - 5g), 5 µg (for max= 10g - 20g) 0...21 g 10...20 s external 1mg-20g (E2,F1,F2,M1)
WAX 210-5100 MASS COMPARATORS Mass comparators are devices designed for determining the differences between masses of calibration weight (B) and reference weight (A). Comparators are most often used in measuring laboratories for calibration of weights and masses. Radwag offers comparators designed for calibration of weights and masses class E1, E2, F1, F2, M1 according to OIML R111, ranging from 100g to 5000g with readability from 0.01mg to 1mg. Main part of the comparator is precise mechanical measuring system which is separated from electronic circuits. Such solution guarantees elimination of temperature influence (warming of electronic elements) on the indications of comparator. Comparator is equipped with big graphic backlit display with user friendly menu in Polish and English language In order to guarantee proper accuracy of measurements, a half-automatic system of external calibration with calibration weight has been applied. Comparator is equipped with esthetic weighing chamber with glass anti-draught protection. All elements of the weighing chamber are manufactured from glass or metal which minimalizes the influence of electrostatic charges on weighing result. Comparator is equipped with user friendly menu. The software allows for composition of GLP procedures as standard printout or as freely definable non-standard printout. Each comparator is equipped with RS 232, PS/2 output and possibility of connecting additional display as standard. 179 136 56 421 193 201 421 538 Comparator is in high degree influenced by external conditions like temperature, breeze and vibrations. For the purpose of proper operation conditions, it is necessary to use the comparator in a room with very precise temperature control (laminar air-conditioning) and place of usage should be free from any vibrations. Comparators do not undergo Legal Metrological Control. Main criterion if evaluation is repeatability. The software is equipped with application for estimating average deviation by two methods: ABA or ABBA, for maximally 20 repetitions. After running the procedure, the software generates the report with results. Maximal capacity Range of electromagnetic compensation Stabilization time Calibration Calibration range according to OIML R111 WAX 210/KO 210 g 0,0 0,0 0...20 g 10...20 s external 50-200g (E2,F1,F2,M1) 100-200g (E1) WAX 510/KO 510 g 0, 0, 0...20 g 10...20 s external 50-500g (F1,F2,M1) 500g (E2) WAX 2100/KO 2100 g 0, 0, 0...200 g 2...10 s external 500g-2kg (E2, F1, F2, M1) 1-2kg (E1) WAX 5100/KO 5100 g 0,5 mg 0...200 g 2...10 s external 5kg (E2,F1,F2,M1) 1-2kg (F1,F2,M1)