Centralized Monitoring Management Platform Manual

Centralized Monitoring Management Platform Manual 1

Contents 1 Products...3 1.1. Summary...3 1.2. Network topology...4 1.3. Application Environment...4 1.4. Related technology...4 2. System Architecture...5 2.1. Centralized Monitoring Management Platform(SmartManager)...5 2.2. Streaming media server transponders(smartss)...6 2.3. Embedded adapters(embedadapter)...6 2.4.PC-DVR SmartDvr...6 2.5. Embedded DVR or DVS...6 3. Install and uninstall...6 4. Software Help...7 4.1. Centralized Monitoring Management Platform Help...7 4.1.1. Software start...7 4.1.2. Login System...7 4.1.3. Main Interface...8 4.1.4. Change the administrative password...9 4.1.5. Remote Login settings...9 4.1.6. Packet Video Configuration...10 4.1.7.Alarm relate setting...12 4.1.8. Electronic Map...14 4.1.9. Image preview operation...15 4.1.10. Remote operation PTZ...18 4.1.11. Remote matrix operation...19 4.1.12. Collect record and playback...20 4.1.13.TV Wall...21 4.1.14. Screen switch...23 4.1.15. Remote configuration...23 4.1.16. Remote replay...24 4.1.17.Browse picture...26 4.1.18. Show alarm log...27 2

1 Products 1.1. Summary SmartManager is a large-scale network monitoring and management software, distributed network topology, and support for streaming media transmitted directly connected to the network server front-end Video Capture: 1, and highly scalable, according to customer demands to expand their control, a control point is a centralized monitoring and management platform. 2, in the user access control, streaming media transmitted adoption of a unified user access control, streaming media server user permissions check, directly connecting the server front-end video capture, video capture server-tested for competence. 3, focus on monitoring and management platform supports multi-screen images and preview images as round, as well as electronic map image preview and joint operation of the police function. 4, in the network to adopt the most advanced technology to complete port in the same network environment than the general quality of the TCP network transmission more efficient, but also support the break-even. 5, support on the market today mainstream board and the mainstream DVR-embedded DVR or DVS. 6, front-end support remote video capture server configuration, remote video capture playback front of a video file servers, remote-control video capture front-end server Haeundae or other related equipment. 7, regular support, as well as video and manual on the server front-end video capture video on mobile alarm linked in a document on video playback, the manner and time of the progress of search and playback in the process of positioning can be arbitrary time intervals operation arbitrary state support Quick Search simultaneously positioning, support cycle broadcast, video editing documents, local amplification and video files can be damaged due to brownout and automatic restoration capabilities. 8, TV wall function. 9, centralized monitoring and management platform in the front-end server records the alarm log, for real-time alarm log. 10, or between management platform to support management platform and front-end servers Video Capture speaking voice and voice broadcasting. 3

1.2. Network topology SmartManager StreamServer EmbeddedAdapter PC-DVR Embedded-DVR EmbeddedDVS 1.3. Application Environment The configuration of the system requirements are as follows Hardware CPU P41.7GHz and above Memory 256MB and above Graphics Geforce 4 64MB and above Software OS Windows2000 WindowsXP windows2003 DX DirectX8.1 and above Disk Space In order to ensure the normal operation of video, hard disk free space may not be less than 80 G. 1.4. Related technology Efficient use of the software in C++ and VCL advanced a combination of all of the OOA / OOD design concept. Efficient use of cross-platform XML parser. Use the thread pool technology, greatly reducing system overhead resources. The use of advanced Copy-On-Write technology, reducing redundant memory overhead. 4

Use of mainframe and client-use completion ports, reduce data transceiver, in connection with the delay time, all data and commands to adopt a port, the elimination of the multinetwork DVR to bring out mapping the routers do not use the port bottleneck. use memory pool technology and reduce the frequency distribution of the memory system overhead. Multithreading mutex adopted advanced literacy recursive locks, compared with the traditional Windows Lock Yong higher performance. Use STL, Template, Template Meta-Programme, will run the system that compile-time expenses, the savings in operating system overhead, a reduction of the code, and increase the flexibility of the program, with more use of safeguard. Extensive use of the universally recognized "Design Patterns", such as: Abstract Factory, Builder, Singleton, Composite, Command, Iterator, Proxy, very conducive to software development. More use of binary tree, hash algorithm, making access and faster processing. Use exception handling mechanism, even if the board is due sdk or applications in a very specific situation, the same procedures can be achieved in the context of abnormal machine and the hardware / software environment to facilitate later revision. Will use skin and functional separation xml and procedures to facilitate rejuvenate. Accordance with the functions of software modules to facilitate the modification and maintenance. A self-extracting RAR installation forms to facilitate the replacement of LOGO and company information. Each channel the same time only one video file, saving disk space. Lock system used in the software during operation, the general operator not to withdraw from the desktop, can be prevented through special methods of procedures, and enhance the robustness of the system. 2. System Architecture 2.1. Centralized Monitoring Management Platform(SmartManager) Monitoring and management platform is focused on the monitoring of the core network, responsible for the front-end board-dvr and embedded DVR or DVS centralized management, 5

including: image preview, remote configuration, remote playback video files, remote-control front-end equipment, alarm Show log on video and playback, electronic maps, video walls, alarm linkage, and so on. 2.2. Streaming media server transponders(smartss) Streaming media server transmitted mainly used in the large-scale network monitoring projects, as a front-end server and the Video Capture centralized monitoring of the network management platform bridge for transmitting video images, including the network data. 2.3. Embedded adapters(embedadapter) Embedded adapter is transmitted streaming media server software packages is transmitted streaming media server and embedded DVR or DVS network bridge for the transponder embedded DVR or DVS streaming media server and network data. 2.4.PC-DVR SmartDvr PC-DVR monitoring and management platform is to focus on the front-end video acquisition server, select a video data acquisition, alarm signal reception, according to the system configuration and implementation of the corresponding joint tasks, configuration and control of video motion detection alarm, sensor alarm, alarm output, PTZ operations, log records and enquiries, playback of video files, network services and management functions (board support for the mainstream market today: Hikvision, Higheasy, Hanbang, Thakral). 2.5. Embedded DVR or DVS Embedded DVR or DVS is to focus on the front-end monitoring and management platform for video capture servers, mainstream support for the market today Embedded DVR or DVS (including: Hikvision, Dahua, etc.). 3. Install and uninstall Install and uninstall very simple installation package is a self-extracting file, double-click the mouse directly install icon will be notified by the successful installation. Uninstall program in the 6

Start menu, the selection "Program" -> "Centralized Monitoring Management Platform" -> "Uninstall", will be able to swap unloading procedures. 4. Software Help 4.1. Centralized Monitoring Management Platform Help 4.1.1. Software start Direct operations in the installation directory under "SmartManager.exe" document will be launched on monitoring and management platform. 4.1.2. Login System In the login dialog box, enter an administrator user name (the default is: system) and password, click on the OK button to start the system. 7

4.1.3. Main Interface The main interface at the top of the main menu and the main menu button, the right to the central display video images, the left side of the channel operation and conventional camera operation, most of the lower part of real-time alarm information display, a yellow window frames for the current video window. 8

4.1.4. Change the administrative password Click on the main menu "System" menu, select "Administrative information" menu, the pop-up "change the administrative information" dialog box, modify End password, click OK button. 4.1.5. Remote Login settings 9

Click on the main menu "Configuration" menu, select "Remote Login settings" menu, or click of a button, the pop-up Remote Login Settings dialog box. 1, add login information: click of a button 2, delete login information: click of a button add remote login information. to delete the selected remote login information. 3, modify login information: click of a button remote login information revision. 4.1.6. Packet Video Configuration 10

Click on the main menu "Configuration" menu, choose "Configuration video division" menu, or click on "routine operation" in the button, the pop-up "video division Settings" dialog. 1 adding video subgroups: adding video division click of a button. 2 delete video subgroups: click of a button to delete video division. 3 adding video display images groups: the left camera icon will be dragged directly access the list can be added the camera channel. 4 Video settings as packet round: Amending the lower part of the value, depending on time round can be set up, check the video to determine which groups will enter the round as group. 11

4.1.7.Alarm relate setting Click on the main menu "configuration", select "Alarm relate setting" menu, the pop-up " Alarm relate setting " dialog. 1 cameras channel alarm linkage: Video Capture selected a server, right click, pop-up menu, choose "channel relate," the camera can be given for each video channel automatic alarm correlation can also manually set up video linkage, as long as check linkage channel video camera on the trip. 2 Set up joint police sensor: a video capture selected server, right click, pop-up menu, select "sensor related", each probe can be automatically linked to the police video (such as: "sensor 1" connection "Camera 1" video), can also be manually set up joint video, as long as the check linkage channel video camera on the trip. 3 Linkage video settings: Laws can be numerical. 12

4 Copied to the other server: click of a button, the pop-up "copy to " dialog box, check the server, click can be identified will be set up replication to other servers. 5 Save Settings: Setting up good, click can be identified. 13

4.1.8. Electronic Map Click on the main menu to the "electronic map" menu, choose "pop-up electronic map" menu or click of a button, can be hidden or pop-up electronic map. 1 Installation of electronic map: click of a button, the pop-up menu configuration organizations can add, modify, delete organizational layers. 2 delete electronic equipment map: click of a button to delete the selected map icon equipment. 3 the preservation of electronic map: click of a button preserve electronic maps installed. 4 withdraw from the electronic map: click of a button hidden electronic map. 5 add electronic map equipment: Conventional operating area of the left side of the camera icon dragged on the map, the camera can be added to the map. 14

6 electronic maps equipment operators: Double-click electronic camera icon on the map, to open the camera image. 7 electronic alarm linkage map: in the electronic map of the election or switching to an electronic map shows that, if the server front-end video acquisition occurred alarm, and the police point has been added to the electronic map, the map will pop up and flashing icon corresponding alarm equipment, double-click the icon to open the corresponding video. 4.1.9. Image preview operation Click on the main menu "Image preview" menu, or operation "Conventional operating" button and pop-up menu, can realize the image preview function. 15

There are three ways to open Preview: 1. Right-click menu "Open Preview." 2. Rejection node to drag the video window on the left. 3. Access nodes in the double-click. 16

More than four menu items are selected based on the current node for the operation of the image, if selected node is the host, is that the mainframe operating below all channels, if the selected channel is only the current channel operation If selected is the streaming media server, it is not gray with the state. 17

Image window is selected as the current window, point operation "channel operating" button or scroll bar can adjust image brightness and color, image and voice volume can be adjusted. 4.1.10. Remote operation PTZ Image window is selected as the current window, if the current window configurations are PTZ, the button was available state: Click the completion of the operation of the same action. The click of a button, the pop-up dialog box, calling the corresponding preset points. 18

4.1.11. Remote matrix operation Remote access to the click of a button matrix operation can be achieved on the remote video matrix control. 19

4.1.12. Collect record and playback 4.1.12.1 Collect record "Conventional operating" Video Capture server list click the right mouse button, the pop-up menu, select "Start Video" menu launched on video, select "Stop Video" menu stop on video. If you choose the server, the server started all channel video, if you select the camera access, video channel started. 4.1.12.2 Collect replay "Conventional operating " Video Capture server list click the right mouse button, the pop-up menu, choose "Local replay" menus, pop-up local playback interface, the specific operation of the light SmartDVR instructions "player instructions." 20

4.1.13.TV Wall Click on Main Menu "Tv wall", select "Tv wall set" menu, or click of a button, the pop-up "TV wall Output Settings" dialog. 21

1. TV wall set up sub-groups: the click of a button, add TV output wall grouped under the group name below actual output channel matrix card number automatically generated output channel list, the click of a button click of a button to delete the selected output sub- Laws selected output division title. Below is the output of each division wall TV output channel, a corresponding output channel. 2. Television set output wall display images: the left side of the camera will be dragged directly on the camera can be selected for the television display output channel added output images. According to the output of each channel of the camera, and automatic segmentation images. The following chart output channel 1 added four camera images, when output to a television, the whole TV screen will be automatically divided into four images, showed that four camera images. 22

3. Polling wall television set output: the lower part of the revised value can be set by polling group output to the TV wall interval. 4. TV wall output operation: the main menu click on the "Tv wall", select "Round robin output" or "Manual output" menu, can be achieved by grouping polling output to a TV wall or manually select group output to a TV wall. 5. If you do not want to continue to export images to TV wall at the main menu can "Tv walls", select "Close output." 4.1.14. Screen switch Click on the main menu "screen switching," choose a different split screen menu can be switched screen number. "Page up" and "Page down" page-provided function. (Hint: PageUp and PageDown can turn the pages) 4.1.15. Remote configuration 4.1.15.1. SmartDVR remote configuration In the " Conventional operations" to select a DVR, right-click, pop-up menu, select "Remote Config" menu or click of a button, if it is on the board of the pop-up card-dvr DVR remote configuration dialogue box. 4.1.15.2. Embedded DVR or DVS remote configuration In the " Conventional operations" to select a DVR, right-click, pop-up menu, select "Remote Config" menu or click of a button, if it is embedded DVR or pop-up on the corresponding DVS brand Embedded Remote Configuration dialog. 23

4.1.16. Remote replay 4.1.16.1. SmartDVR remote replay In the " Conventional operations" to select a DVR, right-click, pop-up menu, select "Remote replay" menu or click of a button, if it is on the board of the pop-up card-dvr DVR remote playback interface. 4.1.16.2. Embedded DVR or DVS remote replay In the " Conventional operations" to select a DVR, right-click, pop-up menu, select "distance intervals" menu or click of a button, if it is embedded DVR or DVS Embedded Remote playback on the pop-up interface, Embedded Remote playback supporting up to four screen playback, each frame of a camera corresponding channel. 24

1. search records files: choose a date, select record types, then check the cameras to channel playback, and click the button search video files, video documents show that in the list delete the selected video files, and click 2., click of a button to clear video file list. Playback video files: Double click in the list of documents or click of a button the records of players selected documents in the playback process click of a button, can be puase, stop, slow, fast forward, frame, capture picture, and other functions, drag image volume can be adjusted. 25

4.1.17.Browse picture Click on the main menu "other", select "See picture" menu or click of a button, the pop-up plug dialog box. 26

4.1.18. Show alarm log Click on the main menu "other", select "Show log information" menu, the pop-up "log management" dialog box. 27