metal architectural systems
inspiring Every building has a story to tell a character in its own environment, reflecting a unique and carefully considered design. And the building envelope whether bold, sleek, edgy, or classic introduces that story, gives it cover, and invites the outside in. Metal Sales roof and wall systems offer the design versatility to make a remarkable impression. Metal Sales quality products come in a variety of profiles, widths, and gauges. They can be curved, perforated, and color coated to any desired look limited only by your imagination. For discriminating architects, owners, and contractors, looks are just one reason to specify Metal Sales. Equally important, these systems are materially efficient, durable, and virtually maintenance-free. Metal Sales is the premier provider of metal envelope systems with nationwide manufacturing, sales, and distribution facilities. This means that no matter where you re building, Metal Sales is always nearby to provide expert technical support and field service 24/7. And with leading warranties, extensive product testing, and real-world applications, Metal Sales ensures ultimate life-cycle performance. A building envelope from Metal Sales offers the inspired introduction to an engaging story how will you tell yours? Formosa 1140 West Hollywood, A Architect: Lorcan O Herlihy Architects Profile: T16-E Wall 2 OVER PHOTO Arizona State University Walter ronkite School of Journalism and Mass ommunication Phoenix, AZ Architect: HDR Architecture, Ehrlich Architects Profile: T23 Wall
Page Roof Wall Soffit Standing Seam Roof systems 5 Magna-Loc 5 urved Magna-Loc 180 6 Vertical Seam 6 Seam-Loc 24 6 Snap-Loc 24 7 Mini-Batten 7 Image II concealed fastener Flush Face Wall Systems 9 TL-17 Series 9 TL-1222 10 TL Series 11 Soffit Exposed fastener Roof & Wall Systems 13 I72-Panel 13 7/8 orrugated 14 T10 14 T13 15 T16-E 15 T2630 16 T2832 16 TDR-6 17 T23 17 T25 17 V-Line 32 More hoices, More Locations, More onvenience More choices means more possibilities. That s why building professionals turn to Metal Sales for the most ambitious metal roof and wall solutions. We re committed to giving you more to help you create your inspired design. With 21 locations nationwide and the largest sales and service team in the industry, we provide superior customer support, the widest product selection, unmatched value, and the most efficient delivery. Our broad range of metal roof and wall products from industry classics to exotic, edgy profiles are designed to satisfy any aesthetic objective. To help you achieve your vision, the Metal Sales design assistance team works closely with you to find solutions to your unique challenges. We deliver a wealth of technical information built from 50 years of American manufacturing experience to make the design and specification process as easy and convenient as possible. Metal Sales products are manufactured reliably and tested rigorously to meet the needs of highperformance buildings. And with knowledgeable and responsive sales and installation support, you can be confident in the success of your project from start to finish. Explore the possibilities with Metal Sales. Get to know our extensive product and system offerings, straightforward retrofit solutions, high-performance coating and material options, company-wide commitment to sustainability, and unparalleled technical support. Begin your next project with more choices inspired by Metal Sales. www.metalsales.us.com 3
standing seam roof system Silver Oak ellars Napa Valley Winery Oakville, A Architect: Taylor Lombardo Architects, LLP Profile: Vertical Seam Roof Metal Sales standing seam systems deliver clean, linear elegance paired with unmatched quality for a dependable, long-lasting, and beautiful roof. Our multiple system offerings are designed to meet any aesthetic preference, performance requirement, or budget. Structural Standing Seam roof systems are ideal for lower sloping and longer spanning roofs, or where extreme temperature variations exist. They are installed over open framing. Thicker gauge substrate for superior structural strength and durability May be installed directly onto open purlins and serve as a work platform for the installation crew, resulting in a fast, efficient, and easy installation Installed with concealed clips to allow for thermal movement Accommodate blanket insulation for enhanced thermal efficiency Highest wind, fire, and impact resistance of any roof option Economical standing seam options are also available. These have higher slope requirements and are installed over a solid substrate. This catalog includes the most popular profiles. For additional options visit www.metalsales.us.com. 24
Magna-Loc / Magna-Loc 180 Structural standing seam roof system Panel coverages: 16" or 18" Rib height: 2" Gauges: 24 ga. standard, 22 ga. optional Minimum roof slope: 1/2:12 Factory-applied side lap sealant Mechanically seamed side lap oncealed clip designed for thermal movement Accommodates 1/2" to 6" blanket insulation Magna-Loc 16" or 18" overage with Striations Factory-Applied Sealant 2" Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume 16" or 18" overage ontact Metal Sales for load carrying capabilities with Pencil Ribs 2" Factory-Applied Sealant 16" or 18" overage Flat Pan 2" Factory-Applied Sealant 16" or 18" overage Magna-Loc 180 with Striations 2" Factory-Applied Sealant 16" or 18" overage with Pencil Ribs 2" Factory-Applied Sealant 16" or 18" overage Flat Pan 2" Factory-Applied Sealant urved Magna-Loc 180 Structural standing seam roof system Panel coverage: 16 Rib height: 2 Minimum radius: 20-0 Gauge: 24 ga. standard Pre-applied side lap sealant Mechanically seamed side lap oncealed clip designed for thermal movement Accomodates 1/2 to 6 blanket insulation Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume ontact Metal Sales for load carrying capabilities Factory-Applied Sealant 16" overage Factory-Applied Sealant with Striations Pre-Applied Sealant www.metalsales.us.com 2" 5
Vertical Seam Structural standing seam roof system Panel coverages: 12, 16, or 18 Rib height: 1-3/4 Gauges: 26 ga. and 24 ga. standard, 22 ga. optional Snap-together panel system with factory-applied side lap sealant Minimum roof slope over open framing 3:12 Minimum roof slope over solid substrate 1:12 oncealed clip designed for unlimited thermal movement Accommodates up to 4 blanket insulation Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume ontact Metal Sales for load carrying capabilities 12",16" or 18" overage with Striations Factory-Applied Sealant 12",16" or 18" overage Flat Pan Factory-Applied Sealant 1-3/4" 1-3/4" Seam-Loc 24 Structural standing seam roof system Panel coverages: 24 or 18 Rib height: 2-11/16 Gauges: 24 ga. standard, 22 ga. optional Minimum roof slope: 1/4:12 Factory-applied side lap sealant Pittsburgh double flat locking mechanically seamed side lap oncealed clip designed for thermal movement Accommodates 1/2 to 6 blanket insulation Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume ontact Metal Sales for load carrying capabilities Factory-Applied Sealant Factory-Applied Sealant 24" overage 18" overage 2-11/16" 2-11/16" Snap-Loc 24 Structural standing seam roof system Panel coverage: 24 Rib height: 3 Gauges: 24 ga. standard, 22 ga. optional Minimum roof slope: 1/4:12 Factory-applied side lap sealant Snap together panel system oncealed clip designed for thermal movement Accommodates 1/2 to 6 blanket insulation Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume 26 Factory Applied Sealant 24" overage 3"
Mini-Batten Standing seam roof system Panel coverages: 12, 16, or 18 Rib height: 1 and 1-1/2 utilizing a narrow batten cap Gauges: 24 ga. standard, 22 ga. optional Minimum roof slope: 3:12 urved and tapered capability available for 1 Mini-Batten Minimum radius: 4-0 pan and batten oncealed clip designed for thermal movement Applies over solid substrate with 30# felt underlayment Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume 12" 16" or 18" overage 12" 16" or 18" overage 1" Image II oncealed direct-fastened roof system Panel coverages: 12 or 16 Rib height: 1 Gauge: 24 ga. standard, 26 ga. optional Minimum roof slope: 3:12 Applies over solid substrate with 30# felt underlayment Finishes: PVDF (Kynar 500 ) and Acrylic oated Gavalume 1" 12" or 16" overage with Striations 16" overage 1" with Minor Ribs 1" with Minor Ribs www.metalsales.us.com 7
concealed fastener wall systems Grand anyon University Phoenix, AZ Architect: Architekton Profiles: TL-1 Wall oncealed fastener wall systems from Metal Sales provide a high-performance, weathertight, and sleek exterior option. Designers often choose this system for a clean aesthetic, absent of visible fasteners. Panel profiles in this category are made in series, designed for mixing and matching to create an infinite variety of wall configurations. Several panels have flat faces. All others feature box-shaped ribs and/or reveals of varying widths. These panels may be installed either horizontally or vertically and make for an excellent rainscreen in back-ventilated wall design. This catalog includes the most popular profiles. For additional options visit www.metalsales.us.com. 28
TL-17 Series oncealed direct-fastened panel for wall, soffit, fascia, or liner applications Panel coverages: 12 and 18 TL-17 Panel depth: 1-1/2 22-0 maximum length Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional ustom capabilities include: Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester 6" TL-17A TL-1222 oncealed direct-fastened panel for wall, soffit, fascia, or liner applications Panel coverage: 12 4" Panel depth: 1-1/2 25-0 recommended maximum length TL-17 Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional ustom capabilities include: Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester TL-17D 1" 18" overage 2" 2" TL-17 Wide TL-1222 www.metalsales.us.com 9
TL Series oncealed direct-fastened panel for wall, soffit, fascia, or liner applications Panel coverage: 12 TL-1 Panel depth: 1-1/2 40-0 maximum length* Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga. and 20 ga. optional ustom capabilities include: Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester TL-2 * Maximum length is limited only by the possibility of oil canning occurring at longer lengths. To minimize this potential, we recommend specifying 22 ga. or 20 ga. if a long length is desired. Please contact your Metal Sales representative for assistance. TL-3 TL-4 6" TL-9 6" 210 TL-10
Soffit Panel oncealed direct-fastened system for wall, soffit, fascia, or liner applications Panel coverage: 12 Panel Depth: 1 Gauge: 24 ga. standard and 0.032 aluminum Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume with V-Grooves 1" Flat Pan 1" Proto Homes Baldwin Hills, A Architect: Proto Homes Profile: TL-1, T2, TL-1222 Wall www.metalsales.us.com 11
exposed fastener roof & wall systems U San Diego East ampus Office Building San Diego, A Architect: Gensler Products: T10-A, T13-A, TDR-6 anopy Metal Sales exposed fastener panels offer designers the broadest range of profiles, from corrugated to trapezoidal, and box-shaped ribs of varying depths. This provides a diverse palette for unique textures, shapes, and shadow lines. Panels in this category can be used for roofing or installed either vertically or horizontally for walls. These panels may be curved or perforated in highly customized ways to meet the functional and aesthetic needs of a building. This catalog includes the most popular profiles. For additional options visit www.metalsales.us.com. 212
I72-Panel Exposed direct-fastened industrial panel for roof and wall applications Panel coverage: 36 Rib height: 1-1/2 at 7.2 centers Minimum roof slope: 1:12 Gauges: 24 ga. standard, 22 ga. and 20 ga. optional Roof 36" overage 7.2" Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume 36" overage 7.2" Wall 7/8 orrugated Exposed direct-fastened panel for roof and wall applications Panel coverages: 32 roof, 34-2/3 wall Rib height: 7/8 at 2-2/3 centers Gauges: 24 ga. standard, 22 ga. and 20 ga. optional Optional material: stainless steel, aluminum, copper, and weathering steel 32" (Roof overage) ustom capabilities include: Perforated panels for wind screen and liner panels Minimum roof slope: 1:12 Roof 7/8" 2-2/3" 34-2/3" (Wall overage) Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume Wall 7/8" 2-2/3" Perforated panels are an aesthetic design solution for windscreens, balcony railings, ventilation, and concealment screens. onsult with our Technical Services team to achieve the visual effect you desire and the structural integrity your project requires. www.metalsales.us.com 13
T10 Exposed direct-fastened panel for roof, wall, soffit, fascia, and liner applications Panel coverage: 28, 30, and 36 Rib height: 1-1/2 90 vertical box ribs on 4, 6, and 9 centers Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional ustom capabilities include: Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester T10-A T10-B 28" overage 30" overage 4" 6" 30" overage 6" T10-36" overage 9" T10-D T13 Exposed direct-fastened panel for roof and wall applications Panel coverage: 24 Rib height: 3 Trapezoidal rib on 6 and 8 centers Optional material: stainless steel, aluminum, and copper 24" overage Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional Minimum roof slope: 1:12 ustom capabilities include: T13 8" 3" Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester T13-A 24" overage 6" 3" 214
T16-E Exposed direct-fastened panel for roof and wall applications Panel coverage: 36 Rib height: 3/4 Trapezoidal rib on 4-1/2 center Optional material: stainless steel, aluminum, and copper 36" overage Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional ustom capabilities include: 4-1/2" Perforated panels for wind screens and liner panels 3/4" Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester T2630 Exposed direct-fastened panel for roof and wall applications Panel coverage: 30 Rib height: 2 Trapezoidal rib on 6 center Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional 30" overage 6" ustom capabilities include: Perforated panels for wind screens and liner panels 2" Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester www.metalsales.us.com 15
T2832 Exposed direct-fastened panel for roof and wall applications Panel coverage: 32 Rib height: 2 Trapezoidal rib on 8 center Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional Minimum roof slope: 1:12 32" overage 8" ustom capabilities include: Perforated panels for wind screens and liner panels 2" Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester TDR-6 Exposed direct-fastened panel for roof and wall applications Panel coverage: 18 Rib height: 4-1/2 Trapezoidal rib on 6 center Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional 18" overage 6" Minimum roof slope: 1:12 ustom capabilities include: 4-1/2" Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester 216
T23 Exposed direct-fastened panel for roof and wall applications Panel coverge: 32 Rib height: 3 Trapezoidal rib on 8 center Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional ustom capabilities include: Perforated panels for wind screens and liner panels Standard Finish: PVDF (Kynar 500 ) 32" overage 8" 3" Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester T25 Exposed direct-fastened panel for roof and wall applications Panel coverage: 24 Rib height: 4 Trapezoidal rib on 12 center Optional material: stainless steel, aluminum, and copper Gauges: 24 ga. standard, 22 ga., 20 ga., and 18 ga. optional 24" overage ustom capabilities include: Perforated panels for wind screens and liner panels 12" Standard Finish: PVDF (Kynar 500 ) Optional Finishes: Multi-pass PVDF, Print oat Systems, Plastisol, and Polyester 4" V-Line 32 Exposed direct-fastened panel for roof and wall applications Panel coverage: 32 Rib height: 1-3/8 Trapezoidal rib on 4-9/16 center Gauges: 24 ga. standard, 26 ga. and 22 ga. optional Minimum roof slope: 1:12 32" overage Finishes: PVDF (Kynar 500 ) and Acrylic oated Galvalume 4-9/16" 1-3/8" www.metalsales.us.com 17
retrofit harlotte Wood Middle School Danville, A Profile: Magna-Loc Roof The U.S. Green Building ouncil reports that a majority of all construction projects are retrofits and expects this trend to increase in the coming years. When your project calls for roof replacement to correct a failed system, increase wind load capabilities, or enhance aesthetic design, metal is the ideal platform for an integrated roof solution. Solutions for existing flat or sloped roofs Flat roofs are notoriously challenging. They leak, absorb and hold heat, and require frequent and costly maintenance. Whereas sloped Metal Sales roofs provide superior storm water runoff capabilities for a durable, weathertight, and energy efficient solution to last for decades. With Metal Sales roofing retrofit systems, you can easily convert any flat roof to a sloped metal roof. The system includes heavy gauge steel framing to create the solid structure for the new roof, leaving the existing roof intact. This same system is also an excellent choice for retrofitting existing sloped roofs. When you retrofit your roof with Metal Sales, you extend the service life of your building. Opportunities for Energy Efficiency Upgrades Retrofit roofing offers the opportunity to add insulation to increase the building s R-value or integrate a convective cooling system to reduce heat gain in the summer and heat loss in the winter. Renewable Energy Integration apabilities The long service life of a durable Metal Sales roof system also provides an ideal platform for photovoltaic assemblies or wind microturbines, as compared to less permanent roof options that aren t built to sustain the lifespans of renewable technologies. And for innovative rainwater catchment designs, metal is the preferred architectural material. To learn more, visit www.metalsales.us.com. Slope added to existing flat roof. hoose from a variety of Metal Sales panel profiles for a system engineered and tested to meet or exceed the most stringent code requirements in North America for fire, impact, wind uplift, and snow loads. 218
coating systems Metal Sales offers a wide variety of color choices with our high performance PVDF 1 coating system. This system features multi-layer protection and is warranted for long lasting durability and chalk and fade resistance. Meet or Exceed odes and Standards Incorporating advancements in coating technology, the energy performance characteristics of Metal Sales finishes and colors meet demonstrated requirements established by ENERGY STAR and the ool Roof Rating ouncil (RR) for solar reflectance and thermal emittance for steep sloped and/or low sloped buildings. They may also comply with LEED and Green Globes rating requirements for steep slope solar reflectance index (SRI). 2 Benefits of ool olors hoose from a palette of light neutrals to dark saturated colors to achieve your vision while helping the environment. ool roofs may also contribute to strategies for optimizing energy performance. Energy savings and other direct benefits are contingent upon building type, location, and use. Topcoat Exceptional color duarability and gloss retention Primer orrosion resistance and bonding Pretreatment Adhesion, moisture and corrosion protection Galvanized or Galvalume Inhibits corrosion Bare Steel Mill certified to meet ASTM standards Galvanized or Galvalume Pretreatment Primer Back coat overs primer and ensures consistent color Rating and certification requirements Steep Sloped Building Low Sloped Building Roof slope > 2:12 Roof slope 2:12 Energy Star Initial Solar Reflectance 0.25 Initial Solar Reflectance 0.65 3 year Solar Reflectance 0.15 3 year Solar Reflectance 0.50 RR Solar Reflectance 0.20 Solar Reflectance 0.70 Thermal Emittance 0.7 Thermal Emittance 0.75 LEED SRI 29 SRI 78 Green Globes SRI 29 SRI 78 substrate materials Metal Sales offers the most durable of substrate materials available in steel, stainless steel, weathering steel, copper, and aluminum. ontact a Metal Sales representative for more information on material and coating compatibility. 1 PVDF is at least 70% Kynar 500 or Hylar 5000 2 ontact Metal Sales or visit www.metalsales.us.com for a complete listing of finishes and colors, their energy performance characteristics, and compliance per organization s requirements. www.metalsales.us.com 19
sustainability commitment Redding School for the Arts Redding, A Architect: Trilogy Architects Profile: Magna-Loc Roof Metal Sales is committed to advancing sustainable design and building objectives, including architectural strategies toward energy efficiency, LEED certification, and Net-Zero. Our portfolio of durable products containing recycled and recyclable material is ideal for use in high performance building, whether new or retrofit. Metal Sales products optimize energy efficiency, minimize construction waste, and provide the most sensible platform for renewable energy technology and rainwater harvesting systems. Metal Sales closely controls manufacturing processes to capture all metal scrap for recycling. Additionally, most of our facilities have been retrofitted with high-output / high-efficiency lighting systems. Our private fleet of trucks meets the 2007 Highway Rule for reduced engine emissions and is equipped with systems that promote safer, more fuel-efficient driving habits. Build sustainably with Metal Sales. Photo redit: Steve Whittaker 220
build with The World s #1 most Recycled Material By manufacturing our products from strong, durable steel the world s #1 most recycled material out of coil containing a minimum of 25% post-consumer content, our products have low embodied energy compared to other building materials. Excess and scrap steel at the construction site can be easily redirected for recycling as part of a construction waste management program. Plus, durable Metal Sales products have a lifespan surpassing other conventional building materials. Facebook s first LEED Gold building, the Prineville Data enter, trusts Metal Sales T2630 panels for their sustainable protection. Simple, Efficient, Sustainable ommitted to environmentally responsible design, Metal Sales panels are never chemically or mechanically composited with plastic or foam. They are designed with material-efficiency in mind and to be used as the outermost component of a thermally efficient building envelope. ENERGY STAR listed panel colors improve energy efficiency and reduce the amount of energy needed for cooling. Advanced alloy and coating materials extend the aesthetics of our products for remarkable life-cycle performance and are backed by our industry leading 45 year finish warranty. The Bullitt enter in Seattle, WA features 18,000 sq. ft. of TL-1 wall panels. The building was designed and built to meet the standards of the Living Building hallenge and is considered the greenest commercial building in the world. Durable Renewable Energy Metal outlasts other conventional roofing materials, making it the most sustainable choice for Net-Zero design strategies. Metal Sales roof systems outpace the expected service life of photovoltaic technology, both film laminate and polycristalline. Our roof systems also create an ideal platform for rainwater harvesting, solar heating, and micro wind turbines, without penetrating the metal roof to ensure uncompromised weathertightness and durability. The Redding School for the Performing Arts in Redding, A features polycrystalline photovoltaic panels attached to Magna-Loc roof system using clips to the metal ribs. Environmentally Responsible Partners At Metal Sales, we know that achieving environmentally responsible and Net-Zero construction requires associations with like-minded partners. That is why we affiliate with esteemed organizations like the The Green Schoolhouse Series, the U.S. Green Building ouncil, ENERGY STAR, and ool Roof Rating ouncil. Enveloped in 7/8 orrugated wall panels and Vertical Seam and Magna-Loc roof panels, the U Davis West Village is the largest Net-Zero community in the U.S. www.metalsales.us.com 21
technical support William R. Anton Elementary School Exceeds HPS and Title 24 standards Los Angeles, A Architect: Nadel Inc. Profile: T16-L Wall With the largest sales force and the most manufacturing, sales, and distribution facilities in the industry, Metal Sales is positioned to offer responsive technical support nationwide. Product information, guide specifications, technical details, Autoad drawings, and BIM models are easily accessed 24/7 on our website. Our highly trained architectural consultants are readily available to provide assistance. Offering AIA ontinuing Education programs, we provide architects with learning opportunities on high performance aspects of metal roof and wall systems and their role in sustainable and Net-Zero design. Metal Sales is committed to a positive customer experience and offers in-house architectural design and engineering assistance for classic or custom profiles as well as field support that is never far away. We work closely with architects, contractors, owners, and specifiers to ensure that all questions are answered quickly and with full attention to detail. ontact Metal Sales to schedule an AIA continuing education course. 222
products testing organizations and protocols Metal Sales roof and wall systems undergo rigorous testing to ensure our products meet or exceed the latest industry standards for performance and quality control in manufacturing for a consistently uniform and reliable product or service. This chart summarizes performance oriented tests used to demonstrate the achievements of our panel systems. Specify Metal Sales products with confidence. When installed per manufacturer s instructions they meet compliance criteria for International Building ode, including specific requirements for high velocity hurricane zones in the Florida Building ode and for Miami-Dade ounty. Test ategory Test Protocol Description WIND UL 580 Wind uplift resistance of roof assemblies UL 1897 Wind uplift resistance of roof assemblies test as an extension of UL 580 ASTM E 1592 ASTM E 330 TAS 125 FMG 4471 Determine ability of panel system including attachments to resist uniform static pressure Structural performance of exterior windows, curtain walls, and doors by uniform static air pressure difference Standard requirements for metal roofing systems required by Florida Building ode and involves test methods UL580 and ASTM E 1592 Factory Mutual Global approval standard for lass 1 Roof panels requires meeting performance criteria in low fire spread, wind uplift resistance, strength, and durability in foot traffic and hail damage resistance FIRE UL 790 Resistance to Fire Exposure from outside of the building UL 263 Hourly Fire Resistance Ratings of a Roof and Wall Assemblies Integrity when fire occurs inside a building IMPAT UL 2218 Evaluation of impact resistance replicating the impact energy of large hailstones TAS-201 Missile Impact test to determine resistance to wind-borne debris caused by hurricane is among the required testing for Florida Building ode and Miami-Dade ounty. SHEAR STRENGTH ASTM E 455 antilever diaphragm test to calculate shear stiffness ASTM E 564 A 43 ASAE 558 Static Load Test for shear resistance of framed walls for buildings to calculate shear stiffness. Acceptance riteria for steel roof deck and floor systems to calculate the shear stiffness. Load tests for metal-clad, wood frame diaphragms to calculate shear strength AIR AND WATER ASTM E 283 Air leakage through exterior curtain walls; test is run in conjunction wilth ASTM E 331 ASTM E 331 ASTM E 1680 ASTM E 1646 TAS 100 TAS 114 ASTM E 2140 Water penetration of exterior curtain walls Air leakage through exterior metal roof panel Water penetration of exterior metal roof panel; test is run in conjunction with ASTM E 1680 Wind driven rain resistance Water submersion test Water penetration by static water pressure head SOLAR PERFORMANE ASTM 1549 Determine fraction of the solar flux reflected by a surface ranging from 0.00 to 1.00 ASTM 1371 Determine thermal emittance NOTE: The above tests were conducted on various Metal Sales products; not all products have been tested per all tests. Please visit www.metalsales.us.com for additional information and/or consult our Technical Services team about specific products and test results. It is the responsibility of customer to verify compliance requirements for local, state, and national requirements for their plans and specifications. www.metalsales.us.com 23
U Davis West Village Largest US Net-Zero ommunity Davis, A Architects: Studio E Architects, MVE Institutional, Lim hang Rohling & Associates Profile: 7/8 orrugated Wall PROUDLY MADE I N T H E U.S.A. inspired@metalsales.us.com