From Our Reference Date. Appendix to Bosch-AE Instruction MAT-Label. Requirement for Assembly Electronics. based on



Similar documents
Requirements on Marking of Goods and Accompanying Information for Purchased Production Parts

REVISION HISTORY Revision Description of Change Writer/Reviser. A New Release Julio Henriquez / Johan Martinsson / Dennis Quek

Additional Information about RFQ for EM-motive

Date: TITLE BAR CODE LABEL REQUIREMENTS Page 1 of 22

MetroSelect Programming Guide. MLPN 2407/December 1998

Handling, soldering & mounting instructions

Motorola Receiving Bar Code Specification

SOT Packing method

How to Calculate the Probabilities of Winning the Nine PowerBall Prize Levels:

Curriculum of Electronics Engineering Program

Guideline for. General Automotive Quality Agreement for Electronic Components

Introduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft.

997 MUST be sent to Safeway to confirm receipt of 824 transmission. This is unrelated to EDI syntax errors as reported on 997.

RFMD + TriQuint. Supplier Transition Guide. Qorvo Supplier

.OR.AT.ATTORNEY.AUCTION.BARGAINS.BAYERN.BERLIN.BLACKFRIDAY.BOUTIQUE.BRUSSELS.BUILDERS

Siemens Chemnitz Siemens AG Alle Rechte vorbehalten.

Reel pack, SMD, 7" Q1/T1-Q2/T3 standard product orientation Orderable part number ending,115 or X Ordering code (12NC) ending 115.

Lenovo Global Labeling Guide. Volume 6 FRU Package Labels. Lenovo Part Number 41U3002

Supplier quality guideline. VOSS Automotive Group Issue Rev00

NMMA I2of5 CARTON LABEL SPECIFICATIONS November 2006

Surface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding

Product Label Specification

Subject: Lot, Batch & Serial # System Created QC/ Edited by Paul DiMarco Approval/Effective Date: 01/01/2002

810 Invoice ANSI ASC X12 Version 4010

International ACH Transactions (IAT) File Format Guide

North American Labeling Requirements (Canada, Mexico and United States) TRW PROCEDURE WA.D20.001

PCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices

The Heatmanagement Company Power Forum Milano

FEES. Marks Rs With MARKS. 01. Application for registration of each - (a). Mark

HIPAA EDI Companion Guide for 835 Electronic Remittance Advice

Receiving Advice/Acceptance Certificate - SERVICE PARTS ONLY

CCF/CCF-II/MDH Transmission Guides DMB1/5: Direct Mail BUST Function User=s Guide

How to Calculate the Probabilities of Winning the Eight LUCKY MONEY Prize Levels:

ANSI X12 version Advance Ship Notice

QMS Introduction 2015

EHIMA Guidance Document Revision: V05 Issue date:

Core Fittings C-Core and CD-Core Fittings

Delivery specification Labelling of components and products

LEAR Corporation Sweden. Odette Transport Label Guideline Vers. 1 Rev. 4

MMC314xMR. Ultra Small 3-axis Magnetic Sensor, With I 2 C Interface. Signal Path X. Signal Path Y. Signal Path Z FEATURES

Transmission of delivery note and transport data in format VDA 4913

Plastic Card Claims Automation Specifications Document

FXU P C R Frequency (in MHz) Resolutions to 6 places past the decimal point 1 = 1.8V 2 = 2.5 V 3 = 3.3 V

GE Power Electronics Business Total Quality Management for Suppliers

GS1-128 Label Specifications. Version 1.0

3. ROUNDING OFF DECIMAL NUMBERS TO THE NEAREST TENTH

Maximum Length = 4 lines of text, (10 or 8 Points or 6 or 7 LPB). Width of block no larger than 1.75 inches. Page 1 of 9

WEBAPP3: Invoice Approval Financial Approval

Barcode Label Specification

Material and Components Used for UL/C-UL/ULC Mark Follow-Up Services

Math Card Games to Print and Play

RFID Tag On Demand Deployment Solution

Grundfos EDIFACT D.96.A

Guitar Chord Chart for Standard Tuning

Logistic Core Operations with SAP

LVDS 3.2 x 2.5mm 3.3V Oscillator

Using the Cisco Unity Connection Bulk Administration Tool

How To Use Optimum Control EDI Import. EDI Invoice Import. EDI Supplier Setup General Set up

Automotive Consulting Solution. Third-Party Order Processing with Scheduling Agreements

King Fahd University of Petroleum and Minerals

ARTICULATION AGREEMENT OF MOHAWK VALLEY COMMUNITY COLLEGE MAJOR IN ACCOUNTING (A.A.S.) WITH UTICA COLLEGE MAJOR IN ACCOUNTING (B.S.

TECHNICAL DOCUMENTATION FOR VARUBREV

APPENDIX 4: GS1 Application Identifiers All Application Identifiers AI Full Title Format Data Title

Securities Identifiers Capital Markets (From 4 day workshop) Khader Shaik

QLT.DF1130.R04 Signature Authority Coversheet This coversheet shall accompany all controlled documents at all

X12 Implementation Guidelines For Outbound Receiving Advice v (861O)

The information in this document will be common for all X12N implementation guides.

ANSI X12 version Remittance Advice

ACCEPTANCE CRITERIA FOR QUALITY DOCUMENTATION (AC10) June 2014

IFA-Coding-System Transport Logistics Specification. Automatic identification of transport units in the pharmaceutical supply chain

Internal Control Deliverables. For. System Development Projects

Note Logistics documents at MAN Truck & Bus AG (MTB) 1. Overview of Logistics documents Logistics Key Data Sheet... 3

TN0991 Technical note

Chapter 9 Managing Inventory in the Supply Chain

Sonoco Ariba Guide for Suppliers

SIF Validation Tool. Wages Protection System Qatar Central Bank& Ministry of Labour And Social Affairs. End User Guide

Standard Linear & Logic Semiconductor Marking Guidelines

For Components PIERBURG S.A.

Chain of Custody Standard

Self Qualification Results

Rack & Stack 123 TM. Enterprise Education Government Telecommunications Service Providers Tel:

Office Supplies Purchasing Guidelines Degree Programs. January 2009

Quality Assurance Agreement with Production Material Suppliers. History of revisions

Background. IBAN Overview

ANSI X12 version Planning Schedule with Release Capability

TBarCode.NET Barcodes in MS SQL Reporting Services

Contents. Introduction to Gifts and Pledges

How To Use The Gs1 Databar Expanded

Supplier Quality Assurance

REVISION HISTORY APPROVERS

Transcription:

22699213 10 1/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 Appendix to -AE Instruction MAT-Label Requirement for Assembly Electronics based on Requirements on Marking of Goods and Accompanying Information for Purchased Production Parts (MAT-Label) This appendix to the -AE Instruction MAT-Label is based on the specification Requirements on Marking of Goods and Accompanying Information for Purchased Production Parts (MAT-Label), established in collaboration with, Siemens, Hella, Continental and Zollner. Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.

22699213 10 2/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 I. Assembly Electronic This requirement is only for suppliers, which are assembling ASIC s, sensors etc. 1 Definition of the MAT-Label content The Assembly Electronic MAT-Label consists of two DMC s: The MAT-Label DMC as required (see table 1) The second DMC, which contains the component Batches of ASIC s and sensors when added to the main part (see table 2) Label sample: Legend: No. Field Proposals = Label Information 1. Label Version The revision level is a fixed entry and serves the recognition of the label or its version. 12S 4 N ( 0002 ) 0002 (fixed data) 2. Customer Part Part No. Part number of (10 digits without separators) P 10 1277625352 Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.

22699213 10 3/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 No. Field Proposals = Part Information 3. Manufacturer Part Man. Part No. Internal manufacturer part number. 1P 35 SL105C103MAA- S 4. Ordering Code Ord. Code Code for the part which nambiguously can be used for ordering it. Compared to the "Manufacturer Part ", the Ordering Code may contain more information, e.g. Software Version in case of Microcontrollers. 31P 35 SL105C103MAA- S 5. Part Description (Part Name) Part Name Specified of the ordered part (or part name). - SMG060D 6. Manufacturer Explicit identification for the manufacturer, e.g. DUNS-Nr. or mutual agreed. 12V 13 206479668 7. Manufacturer Location Man. Loc. Naming the manufacturing location/locations (to be individually defined between supplier and respective customer). 10V 20 CHN- SHENZHEN2 8. 9. 10. Revision Level/ Index Additional Part Information Date of Manufacturing Index Revision status of the part. 2P Add. Info Man. Date 11. Expiration Date Exp. Date 12. RoHS 13. MS-Level 14. 15. 16. Purchase Order Shipping Note Supplier Name ( real data field!) MSL or MS-Level Purchase Shipping Note Date Code ( YYWW) Delimiter # Trace code (strip-mark) Delimiter # Supplier Lot. No. (Is an internal batch number given to the assembly lot by the supplier) Delimeter # Wafer (if required by ) Date of manufacturing is related to the last manufacturing process The Expiration Date of the part. Fixed value 20991231 if t specified otherwise Indicator for RoHS compliance N: RoHS Y: RoHS 0: t Moisture Sensitivity Level according to IPC/JEDEC J-STD-020. Order number assigned by customer to identify a purchasing transaction. Shipping Note of the shipping te and MAT-Label must be the same. 20P 14 AA 1028#A6BX78 6D 8 YYYYMMDD 200704 14D 8 20991231 20991231 P 1 Z 2 Logistic Information Suppl. The Supplier Name. - K 16K 18 12 (upper case), "N" if t (text) Y Logo 5 55062387/001 412938/001 SAMPLE_CO. 17. Supplier-ID (Vendor ) The fixed vendor number (of the customer) for the supplier. V 10 815 Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.

22699213 10 4/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 No. Field Proposals = 18. Package-ID The explicit, unique number per single package. It has to be unique per supplier (vendor number) and package. It is always related to the smallest package unit. If possible, chrologically related to the production process (e.g. reel-id). 3S 13 S000123456789 (first Byte reserved for specifying single) 19. Quantity Quantity of the smallest package unit. Q 18 12ISO3 to be aligned to the right, see example 500NAR000 (in DMC) (printed: 500) Traceability Information 20. Batch-Counter Batch ID identifies the number of batches 20T 1 N 1 (fixed value) 21. Batch-No. #1 1. Batch No. With this number the supplier has to be able to retroactively provide information about the batch (e.g. volume, production, delivery). The batch identification should be based on same manufacturing conditions. If a manufacturing condition changes batch number should be changed too. 1T 17 *PJ965.3 22. Batch-No. #2 2. Batch No. 23. Supplier Prefix * An Asterisk is used to indicate that a second DMC with component Batchinformation is appended Batch number for the second batch if. Marking on device as defined and lines separated by # 2T Other 24 Not used 1Z 17 SMD187#0126 #PE402.5#090_ AA 25 Not used Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.

22699213 10 5/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 1.1 Component Batch DMC In case of component Batches of the ASIC s and the sensors. String sample: prefix @ A @V815@3SS000123456789@31T%LPJ3.2%W09@32T%L0550835.1%W21,22,23@33T%L160.2 %Q000615%TCA@34T%L161.1%Q0002345%TCA@@ suffix @@ @= separator Table 2 No. Field Proposals = Logistic Information 26 Supplier-ID Supplier-ID of MAT-Label DMC V 10 815 27 Package-ID Package-ID of MAT-Label DMC 3S 13 S000123456789 Traceability Information 28 Comp. Lot-No#1 Component Lot number for the first batch. 31T %LPJ3.2%W0 9 29 Comp. Lot-No#2 Component Lot number for the second batch (Lot-ID, Wafer-ID, Quantity, Lot type) if. 32T %L0550835.1 %W21,22,23 Comp. Lot-No#3 Component Lot number for the third batch. 33T %L160.2 %Q0006156% TCA 31 Comp. Lot-No#4 Component Lot number for the fourth batch 34T %L161.1%Q000 2345%TCA 32 Comp. Lot-No#5 Component Lot number for the fifth batch 35T %L162.3%Q000 1111%TCA 33 Comp. Lot-No#6 Component Lot number for the sixth batch 36T %L163.1%Q000 16%TCA 34 Comp. Lot-No#7 Component Lot number for the seventh batch (Lot-ID, Wafer-ID, Quantity, Lot type) if 37T %L1090.1%Q 0017098%TCE 35 Comp. Lot-No#8 Component Lot number for the eighth batch 38T %L1090.2%Q 0017098%TCE Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.

22699213 10 6/6 Appendix to -AE Instruction Serya Baris / Benedict Hiller 2011-08-26 No. Field Proposals = 36 Comp. Lot-No#9 Component Lot number for the ninth batch 39T %L109048.2%Q 0000567%TCE 37 Comp. Lot-No#10 Component Lot number for the tenth batch 40T %L109049.4%Q 0034567%TCE 1.2 Definition of the Component Lot String Maximum four strings with the identifier: - %L Lot-ID (max. 12 digits) : %LAAAAAAAAA.NN - Optional: %W Wafer number (max. 17 digits) : %WNN,NN,NN,NN,NN,NN - Optional: %Q Quantity (7 digits) : %QNNNNNNN - Optional: %T Lot type (2 digits) : %TAA With SL Sensor AL ASIC CA Cap CE Ceramic AD Adhesive GE Gel Robert Ltd. reserves all rights even in the event of industrial rights. We reserve all rights of disposal such as copying and passing on third parties. Alle Rechte bei Robert GmbH, auch für den Fall von Schutzrechtsanmeldungen. Jede Verfügungsbefugnis, wie Kopier- und Weitergaberecht, bei uns.