Aircraft Maintenance Licence Practical Training Aircraft Type Training Study Anytime Anywhere Approved ELCAS Provider 3 Year Distance Learning Continuation Training Become an Apprentice KLM UK Engineering Technical Training 2015/2016 Course Brochure
KLM UK Engineering and Technical Training About Us KLM UK Engineering Limited (KLMUKE) is an Air France Industries KLM Engineering & Maintenance (AF KLM E&M) Centre of Excellence supporting the entire aircraft lifecycle. Based at Norwich International Airport for over 40 years, KLMUKE has developed 5 modern Heavy Maintenance bays, a fully equipped supporting Workshop, industry leading Technical Training College and a specialist aircraft Dismantling and Recycling centre. At the heart of the facility, a workforce of over 400 highly skilled, motivated and experienced staff deliver a market leading product. Aircraft supported include Boeing 737 Classic and Next Generation, the Airbus A320 family, Fokker 70/100 series and BAe146/Avro RJ. Our Customers A solid worldwide customer base of established, legacy, low cost, start up and VIP airlines enables KLMUKE to deliver high quality products, reliable turn-around-times, adaptive solutions and competitive prices across all products & services, supported by lean six sigma processes & continuous improvement. Technical Training College Our college delivers a variety of technical based training courses and qualifications. We offer: EASA Type / Basic Courses Compliance Training Aircraft Apprentice Scheme Degree Programmes in Aircraft Engineering Online Compliance and EASA Basic Training Working in partnership with Kingston University for over 10 years delivering Aircraft Engineering degree programmes, which incorporate EASA B1 courses. Students benefit from on-the-job training in the main facility including hangars and workshops. E-learning has also been developed for a variety of courses and qualifications, to allow individuals to learn at their own pace and in their own time.
Who are we? Get to know the team... KLMUKE Technical Training College is filled with both aviation and learning and development expertise. The design, development and delivery of courses is managed in-house by the team at the Technical Training College based in Norwich. The team are passionate about developing the engineers of the future within the aviation industry and provide support and guidance to our students throughout their study. Simon Rhodes Head of Technical College John Lee Exam Manager Sarah Chaplin Kingston Course Controller Danielle Cox Lead Learning Technology Coordinator Caroline Gallant Learning Technology Developer Ian Morris Learning Technology Developer Brian Diplock Learning Technology Developer Sam Willey Learning Technology Developer Garry Webb Instructor Nick Jackson Instructor Andy Everett Instructor Gary Greenwood Instructor Martin Redford Instructor
KLM UK Engineering Technical Training College Why Choose Us... Knowledge and experience. Training based at our Technical Training College will provide students the opportunity to increase their knowledge and experience by putting theory into practice with our on-site facilities. Along with this, our instructors are extremely knowledgeable, being part of the aviation industry for many years they have the ability to share their experiences with students. Benefit from individual tutor support every step of the way. KLMUKE Instructors are available to support every student whilst undertaking the chosen course or qualification. Whether in the classroom, workshop or on-line, instructors provide guidance w h i l s t learning and revising. On-line tutorials for additional support. As part of our modular on-line training courses, we provide both live and recorded tutorials for students who would like additional support throughout their qualification. These could be module specific webinars or video tutorials which provide advice and guidance during exam preparation. On-site library. Whilst studying at the Technical Training College, students can make use of the library to either borrow study material that relates to their course modules or for general study. Network with other students worldwide. Studying on-line doesn't have to be lonely. Forums are set up to enable students to chat and discuss modules with other students. Study anywhere, anytime. On-line content is available 24/7 on both PC and mobile devices. Courses are modular to enable students to learn as flexibly as they choose, tailoring a learning experience for each individual. ELCAS approved. Our Technical Training College is an approved ELCAS (Enhanced Learning Credits Administration System) provider and offers B1 Licence Basic Training to HM Forces personnel. Credits can be used towards this course by completing an ELC claim form.
Our Courses & Qualifications What are your options? Summary of Courses and Qualifications Aircraft Engineering BSc (Hons) - in partnership with Kingston University (includes full EASA B1.1) Duration: 3 years full time Location: Kingston University (Year 1)and KLMUKE Technical Training College (Year 2 & 3) OR KLMUKE Technical Training College (3 years) Course Overview: The programme is designed primarily to provide a higher education funded path to a career as a licensed Aircraft Maintenance Engineer in the aviation industry. It also provides an alternative to the more traditional aeronautical engineering courses, for those wishing to seek employment in other areas of the aviation industry such as maintenance planning and control, product development, technical services and other support departments. EASA Category A Licence Duration: 1 year Location: Norwich Course Overview: The programme is designed in accordance with EASA Part 66 to provide the relevant knowledge in aircraft maintenance to become a category A licence engineer following a period of maintenance experience. An aircraft maintenance licence permits the holder to issue certificates of release to service following minor scheduled line maintenance and simple defect rectification within the limits of tasks specifically endorsed on the authorisation. EASA Category B1.1 Licence (Delivered as part of the Aircraft Engineering BSc programme) Aircraft Apprenticeship Scheme Duration: 4 years Location: Norwich Course Overview: This course is designed to equip individuals with the academic and practical skills required to become an Aircraft Maintenance Mechanic. At the end of the 4 year programme, individuals can gain the following qualifications: Level 3 in Mechanical Engineering City & Guilds 2675 in Aeronautical Engineering EASA Category A Licence (subject to achieving required pass mark) Initial and Continuation Training Fuel Tank Safety (Level 2) Human Factors Duration: 1 day per course Location: Norwich Classroom based initial and continuation training is available, to find our more information on these courses please see the on-line training section. EWIS EWIS initial and continuation training is also available online.
Summary of Courses and Qualifications Aircraft Type Training (Classic) B1 - B737 300/400/500 Series Duration: 5 weeks (excluding aircraft visits) Location: Norwich (or alternative facility that meets UK CAA approval / requirements of Part 147) Course Overview: This course has been designed to provide B1 Mechanical technical knowledge relating to B737 300/400/500 series aircraft including descriptions, operation, component location, removal and installation and test procedures to Maintenance Manual Level. Procedures specific to the Boeing 737 300/400/500 with CFM 56 Engines aircraft are also covered. Aircraft Type Training (Classic) B2 - B737 300/400/500 Series Duration: 3 weeks 3 days (excluding aircraft visits) Location: Norwich (or alternative facility that meets UK CAA approval / requirements of Part 147) Course Overview: This course has been designed to provide B2 Avionics technical knowledge relating to B737 300/400/500 series aircraft including descriptions, operation, component location, removal and installation and test procedures to Maintenance Manual Level. Procedures specific to the Boeing 737 300/400/500 with CFM 56 Engines aircraft are also covered. Aircraft Type Training - B737 600/700/800/900 Series (Next Generation) B1 Duration: 5 weeks (excluding aircraft visits) Location: Norwich (or alternative facility that meets UK CAA approval / requirements of Part 147) Course Overview: This course has been designed to provide B1 Mechanical technical knowledge relating to B737 600/700/800/900 series aircraft including descriptions, operation, component location, removal and installation and test procedures to Maintenance Manual Level. Procedures specific to the Boeing 737 600/700/800/900 with CFM 56 Engines aircraft also covered. Aircraft Type Training - B737 600/700/800/900 Series (Next Generation) B2 Duration: 4 weeks 3 days (excluding aircraft visits) Location: Norwich (or alternative facility that meets UK CAA approval / requirements of Part 147) Course Overview: This course has been designed to provide B2 Mechanical technical knowledge relating to B737 600/700/800/900 series aircraft including descriptions, operation, component location, removal and installation and test procedures to Maintenance Manual Level. Procedures specific to the Boeing 737 600/700/800/900 with CFM 56 Engines aircraft also covered. Aircraft Type Training - B737 Differences Classic to Next Generation B1 Duration: 2 weeks 2 days (excluding aircraft visits) Location: Norwich (or alternative facility that meets UK CAA approval / requirements of Part 147) Course Overview: The B1 Mechanical Differences Course is aimed specifically at Part 66 category B1 Aircraft Technicians who already hold or are trained on the Boeing 737 300/400/500 Series aircraft. The training will cover descriptions, operation, component location, removal and installation and test procedures to Maintenance Manual Level, specific to the Boeing 737-600/700/800/900 aircraft. Other aircraft type training available: F100/70 B1 F100/70 B2 BAe146/RJ85 B1 For further information of these courses please contact training@klmuk.com
Summary of Courses and Qualifications What we offer as On-line Learning... EASA Part 66 B1Training Duration: Self Paced Location: On-line Course Overview: This modular programme is designed to meet EASA Part 66 requirements. The programme provides the essential theoretical requirements to qualify as a B1 licence holder. The course is self paced with modules assessed by a combination of exams and essays (dependant on module). Full instructor support is provided to students via forums, email and online webinars Electrical Wiring Interconnection System (EWIS), Initial & Continuation Training - Target Groups 1-8 Duration: Self Paced (1 day practical for Target Groups 1 & 2) Location: On-line (1 day practical based at KLMUKE Technical Training College, Norwich for Target Groups 1 & 2) Course Overview: This training is aimed at various target groups categorised 1 to 8 and is intended to improve the airworthiness code for large airplanes and the requirements for continued airworthiness in the field of electrical wiring interconnection systems since failures in those systems have been indentified as causal factors in several incidents and accidents involving larger aircrafts. Human Factors - Initial and Continuation Training Duration: Self Paced Location: On-line Course Overview: This course is designed to provide Aircraft Maintenance Operatives with the fundamental human factors that should be considered and how to manage them. The course explores the implications of error, organisational safety culture, procedure, safety policy and methods of communication. Fuel Tank Safety (Level 1&2) - Initial and Continuation Training Duration: Self Paced Location: On-line Course Overview: This course is designed to provide those who are involved in the inspection and maintenance of fuel systems. Individuals will learn the theory and practice the fundamentals of fuel tank safety in order to operate safely.
Summary of Courses and Qualifications Something else? Here at KLMUKE Technical Training College we have the capability to design, develop and deliver bespoke on-line training. Should you have any alternative requirements please do not hesitate to contact the team to discuss further at elearning@klmuk.com Excellent introduction to the live maintenance environment, James Townsend, 26, Aircraft Maintenance Mechanic Great learning environment, hands on experience, learnt a lot from the engineers. Adbul Al Masheri, 29, Aircraft Maintenance Technical Support Engineer. There was always someone to talk to if you needed help or had a question. Michael Smith, 17, Aircraft Maintenance Apprentice
EASA Part 66 Cat B1 About Norwich... Getting to Norwich Getting to Norwich is made easy with its excellent road links, bus routes close by, regular train services and Norwich International airport close by. With up to 4 flights daily to Amsterdam, just 2 hours from London and only 1.5 hours from Stansted you can connect to Norwich and the rest of the world with ease. Please follow the link below for further information on all of the travel options available to you. http://www.visitnorfolk.co.uk/explore/norwich-travel.aspx Exploring Norwich Once you are here the options are endless. Known as the capital of East Anglia, Norwich has something for everyone...right on your doorstep! You can experience the arts, music and cultural scene, visit historic landmarks including the city's cathedral and castle, peruse a variety of excellent national retailers and independent shops along with lively restaurants, bars and nightlife. There is plenty for all to explore. Where to Stay Norwich was recently voted the 12th most cost effective place to study in the UK. As a student at KLM UK Engineering arrangements can be made to benefit from KLMUKE business rates at local hotels. For further information please contact the team. Finding Us The Technical Training College is conveniently located next to Norwich International Airport and only minutes from the city's ring road, train and bus station. Getting to and from the College couldn't be easier. Further Information For any further information on Norwich and its surrounding areas please visit http://www.visitnorfolk.co.uk/
The Air France KLM E&M Network...be a part of it Training Enquiries: training@klmuk.com Telephone: +44 (0)1603 480483 On-line Learning: elearning@klmuk.com Contact Us KLM UK Engineering Limited Technical Training College 25-27 Hurricane Way Norwich Airport Industrial Estate Norwich Norfolk NR6 6HE www.klmukengineering.com www.facebook.com/klmukengineering www.linkedin.com/company/klm-uk-engineering-limited