arlay Voice over I Gateway /VoI (SI) conversion + advanced call routing features arlay Unique Voice over I Gateway / to SI converter Migration to VoI, using equipment without modification Call routing to SI based VoI Service roviders Routing of incoming SI calls to Toll-free I voice over LAN / WAN / Internet Home offices and branch offices connected via VoI Seamless fallback to in case of poor I link 1
Unique selling points Makes any VoI capable no modification of the Supports call routing to / from SI based VoI Service roviders VN: Transparent tunnelling of and QSIG via I between 8 Endpoints Advanced call routing schemes via, SI, VN Seamless re-routing of calls via if no VoI connectivity Well-proven stack, handles many national dialects 2
ositioning of arlay arlay is a reliable and cost efficient / VoI converter: analogue interfaces interfaces Voice Gateway arlay Voice Gateway + Data Router 3
SI Trunking: Calls to and from a VoI Service rovider Convert all or certain calls to SI and route to a VoI Service rovider. Receive incoming SI calls and convert to. arlay s routing table allows to define advanced criteria for call routing. These are e.g.: RI trunk lines Company NN telephone system arlay SI VoI Gateway VoI Service rovider SI roxy & VoI Gateway Called arty Number Calling arty Number Time of Day / Day of Week earer Service Service Availability E1 Cancel all or some subscriptions I Low call rates national & international STN Calls to any phone No. in the world via STN or I Standard call rates national & international 4
Least Cost Routing via I, GSM and Outgoing calls from a may be routed to either lines, GSM GW or converted to VoI depending on called number. Automatic re-routing is possible, e.g. from I to if connection via I is not achieved. Incoming calls from, GSM and I are routed to the relevant extensions of the. Mobile phone GSM Fixed phone called via / STN GSM Gateway Fixed phone called via I I VoI SI RI RI RI arlay Call Routing depending on called number 5
VN: Link company sites with VoI Users dial external number. arlay translates into extension number to be called at the remote end. Seamless fallback via is possible. arlay may generate AOC to the on calls via I. The I router takes care for bandwidth and quality management. Main office Office NN LAN LAN I router RA RI VoI via VN I Fallback via 6
VN: Link company sites with VoI Colleagues call each other by dialling an extension number. The two arlays tunnel the signalling thus creating a virtual tie line between the two s. LAN LAN Main Office I router Office NN RI VoI via VN I RI RI RI 7
VN: Skip lines at branch offices There is no need to maintain access at each branch office. This will save the monthly line subscription. However, you may save international call charges when calling via I to a branch in another country and then drop out to as a local call RI Main Office RI Office NN I 8
as a basic There is no need to have a at each branch office. You may connect standard phones to the arlay, which supports basic features like call transfer and hunt groups. Main Office Office NN acting like a RI up to 16 hones RI I 9
Toll-free communication with Home Offices / Small Offices Make toll-free calls to Home Offices with arlay. Callers do not need to change calling behaviour. They just dial the home office number as usual, and arlay converts to the proper I address. arlay can address a huge number of home offices / branch offices. Main Office RA Home Office 1 Any SI hone VoI rovider Home Office 2 Home Office NN 10
arlay and I Centrex I Centrex replaces the in-house. The carrier s node hosts the services of the telephone system. The customer does not have to invest, nor does he have to worry about maintenance and configuration. Everything can be configured via a browser. The beauty of arlay on I Centrex is, that the customer can keep the terminals, and the lines as well. arlay SI hones I VoI rovider Centrex Node Hosted A Terminals 11
Option: Flexible SI to GSM Gateway Terminate VoI calls to mobile phones by a GSM Gateway and save expensive interconnect charges Called arty mobile phone GSM GSM Gateways Called arty fixed phone VoI SI - Routing depending on called number I Calling arty 12
RI to VoI If you need to interface on RI level, the arlay i60 Multiplexer is ideal. It drops out calls to arlay based upon: Called arty Number Calling arty Number Time of Day earer Service Availability RI arlay i60 RI I 13
RI to VoI If you need to interface on RI level, a cost efficient bundling of the arlay 108 or 116 VoI gateways and the arlay i60 RI/RI converter is a powerful solution. You may use the solution for outgoing calls only and maintain a RI line for incoming calls our you may skip the RI line. RI RI arlay i60 RI Actual call routing is handled by the i60 unit and based on: Called arty Number Calling arty Number Time of Day / Day of Week earer Service (voice, data, fax) Availability of service or person Up to 16 voice channels VoI roduct name unit used i60 unit used No. of RI ports No. of VoI Channels 108 108 2 RI & 4 x RI 2 8 116 116 1 x RI & 8 x RI 1 16 116 116 2 x RI & 8 x RI 2 16 The i60 unit may be used for other applications as well, e.g. anti-roaming mobile call-back, least cost routing etc. 14
Interface Variants, 108 default 15
Interface Variants, 116 default 16
andwidth requirements 17
Setting up a routing table This is how it looks when you set up a routing table using the build-in web server. 18
Interested? Do not hesitate to contact us! A/S avnevej 50 DK 6580 Vamdrup hone: +45-7320 0000 Fax: +45-7320 0001 lease visit our web site www.voxtream.com 19