All-round interior organiser systems for office furniture Systema Top 1000 and OrgFrame

All-round interior organiser systems for office furniture Systema Top 1000 and OrgFrame

eal values for the office: quality and convenience. A strong base is essential for great performance in the office. Organiser systems in steel create the ideal conditions for a long-lasting and successful partnership between furniture and the people who use it. Systema Top 1000 for office pedestals and the OrgFrame file cradle pull-out system from Hettich provide the perfect symbiosis of quality and convenience. And all at superb value for money. The office has long been at the development focus at Hettich who, as Europe's brand leader, continues to set new standards with its future-proof system solutions. Systema Top 1000 and OrgFrame are synonymous with first-class functionality and convenience of use. This dependability also involves continuously advancing organiser systems to bring them in line with changing market conditions and the demands that are made on office work. "The successful "all from a one-stop shop" formula from system specialist Hettich guarantees a high level of customer satisfaction. Start-to-finish development, production and marketing provides the office-furniture segment with unparallelled benefits: marks of distinctions for a competitive edge, quality for cost-effective efficiency and practical functionality for everyday convenience. 2

4

Strong at the roots Systema Top 1000 Across the globe, the imaginative Systema ranges from Hettich organise office pedestals to suit any need. Systema Top 1000 is superbly engineered, resolutely concentrating on the practicality and convenience of office pedestals in wood and steel. Practicality leaves no margin of doubt with the high-quality Stop Control locking system providing triple functionality central locking, self-closing and anti-tilt block. As a particularly practical feature, the locking bar is surface-mounted, obviating the need for any channel. Superb technology: Quadro Mini Duplex From now on, Systema Top 1000 is based on unrivalled, tried and proven Quadro technology. The steel-ball runner system guarantees maximum stability and smoothness, benefiting the Quadro Mini Duplex overextension runner in particular. The steel balls and tracks are completely concealed enhancing looks and durability. Convenience you can choose: Silent System soft closure Added convenience makes Systema Top 1000 even more attractive. Silent System for softly closing drawers and pull-outs provides a noticeable qualitative edge, making it easier to concentrate at work: Peace and quiet is now an option. 5

6

All in a solid framework: OrgFrame Suspension filing is still an important component in modern office organisation. The OrgFrame pull-out system provides filing cabinets with sturdy file cradles while at the same time optimising the use of space. This is also where strong ball-bearingrunners ensure easy-action functionality that's capable of carrying heavy loads. Combined with the Stop Control locking system, OrgFrame creates a perfect function unit. The powder-coated frame is also available with shelf. The wide drawer extends the options for using and organising the filing cabinet many times over. OrgFrame is the sturdy basis for organising office cabinets efficiently and to suit any need. 7

Hettich and the environment: committed to responsible practice, active protection, innovative thinking. Hettich takes a responsibility for the world we live in. This awareness defines the strict policy of environmental management we practise. Our environmental officer has taken personal responsibility for these aspects throughout the company group over a period of many years. In addition, a separate environment committee has been established for each production site. We regard statutory provisions as minimum requirements. At significant sites we also implement the stringent EMAS Directive. And we drive forward developments that in future will help to save even more raw materials and support the necessary endeavours towards sustainability. Hettich environmental management Hettich started introducing effective environmental management systems under the stringent EMAS egulation (currently: EC egulation No. 761/2001, including EN ISO 14.001/2004) as long ago as 1996. This not only enables us to improve our environmental performance on a broad front but also achieve a high level of safety which, not least, also benefits our customers. This is why we also require our suppliers to meet the necessary minimum standards of environmental protection, industrial safety, health care and social welfare. The results achieved in the drawer-runner and drawer-system product segment at the Kirchlengern operation illustrate the impressive effects these measures have and verifiably demonstrate our tireless endeavours to translate words into action: elief to the environment between 1997 and 2008: Specific water consumption: 56 per cent Specific power consumption: 21 per cent Specific heat consumption: 84 per cent Specific CO 2 emissions: 29 per cent 8

Hettich standard for product materials Hettich underpins its commitment by applying an internal standard for product materials. This ensures that every product from production to disposal satisfies all environmental requirements. Products from Hettich come with a long life. Appropriately foresighted, our rigorous standards are formulated to ensure that international legislation is met as well. This provides a reliable basis for marketing furniture world-wide. Zero-energy building - Hettich Forum The Hettich Forum building with its neutral energy balance is a shining example of future-proof building design. Photovoltaic panels and solar collection system providing hot water as well as extensive roof greening and use of rain water underscore this building's overall sustainability concept in just the same way as the broad use of cellulose insulation material from recycled newspapers, highly efficient heat recovery and the bulb-free lighting concept do. With the Hettich Group having acquired European Commission GreenBuilding Partner status on 5 March 2009, the comprehensive approach demonstrated by the Hettich Forum has also convinced the adjudicating panel of the national "Green Building Award 2009". Hettich received the first prize to be presented in the "New Building" category. 9

Desk organisation system Systema Top 1000 Pencil tray for work station pedestals Pencil tray With 6 compartments Side trim for concealing the runners Black plastic 1060 84 14 Ball bearing slide KA 170 For pencil tray Partial-extension runner with self-closing feature Suitable for hole line 25 and 2 mm Load capacity (static) 6 kg Galvanized steel Installation width mm left right 80 9 060 96 9 060 97 50 92 9 060 99 9 060 940 50 Insert for steel drawer With 4 compartments Black plastic 9 049 686 25 Euro screw countersunk ø 6 x 14 mm For attaching KA 170, KA 270 and Quadro Mini Duplex drawer runners Nickel-plated steel Special screw ø 5 x 14 mm For attaching the steel drawer front panel Black steel 1 028 128 1000 1 066 980 1000 10

Desk organisation system Systema Top 1000 Steel drawers for desk pedestals Steel drawer AB For installation width 80 and 92 mm Toolless slide-on mounting Lock activators for Stop Control housing must be ordered separately, see page 14 Powder-coated steel black AL 9011 AT IT IB Min. installation depth Exterior dimension Interior dimension mm AB x AT mm IB x IT mm 50 70 x 514 27 x 490 9 055 660 96 70 70 x 714 27 x 690 9 055 661 72 Ball bearing slide KA 270 Hole line 2 Hole line 25 For steel drawers Part-extension Suitable for hole line 25 and 2 mm Load capacity 25 kg Cabinet rail / fixing angle: galvanized steel Drawer slide: black steel 2 44, 82 25 54,8 min. 9,5 80 +1 / 92 +1 Min. installation depth Installation width Hole line mm mm mm left right 50 80 2 9 058 782 9 058 78 20 50 92 25 9 058 786 9 058 787 20 50 92 2 9 058 790 9 058 792 20 70 80 2 9 058 784 9 058 785 20 70 92 25 9 058 788 9 058 789 20 70 92 2 9 058 79 9 058 794 20 Installation width 80 mm / Hole line 25 mm on request Quadro Mini Duplex Hole line 2 Hole line 25 For steel drawers Over-extension 25 mm Suitable for hole line 25 and 2 mm Load capacity 5 kg Galvanized steel 2 4, 82 25 54,8 min. 9,5 80 +1 / 92 +1 Min. installation depth Installation width Hole line mm mm mm left right 50 80 2 9 106 24 9 106 247 16 50 92 25 9 106 284 9 106 285 16 50 92 2 9 106 259 9 106 260 16 70 80 2 9 106 254 9 106 255 16 70 92 25 9 106 257 9 106 258 16 70 92 2 9 106 04 9 106 05 16 11

Desk organisation system Systema Top 1000 Organiser elements for steel drawers Cross partition Double wall with locating catches Locating catch in drawer side panel Black plastic Divider Powder-coated steel black AL 9011 1041 576 100 Format DIN Length mm A4 10 1 040 177 40 A5 220 1 040 176 5 A6 150 1 040 175 50 A7 110 1 042 189 70 Installation depth 50 mm Drawer inside dimensions 27 mm x 490 mm Division 2 x DIN A4 4 x DIN A5 9 x DIN A6 16 x DIN A7 Accessory required 2 cross partitions emaining depth 0 mm 2 cross partitions 2 divider A5 emaining depth 0 mm cross partitions 6 divider A6 emaining depth 10 mm 4 cross partitions 12 divider A7 emaining depth 10 mm Installation depth 70 mm Drawer inside dimensions 27 mm x 690 mm Division x DIN A4 6 x DIN A5 12 x DIN A6 20 x DIN A7 Accessory required cross partitions emaining depth 0 mm cross partitions divider A5 emaining depth 0 mm 4 cross partitions 8 divider A6 emaining depth 50 mm 5 cross partitions 15 divider A7 emaining depth 90 mm CD holders For 20 CDs Transparent plastic 901481 25 12

File cradle With divider Nickel-plated steel / black plastic Depth Width Height For outer drawer Including divider dimensions mm mm mm mm 507 50 244 70 x 514 1 9 09 924 1 set 707 50 244 70 x 714 2 909921 1 set Assembly Front stay Powder-coated steel black AL 9011 left right 104017 1040174 100 A BA Hole line Minimum front panel height mm Size BA mm 2 height units (192 mm) 76,4 25 4 height units (200 mm) 7 Installation width mm Size A mm 92 17,25 80 11,25 1

Desk organisation system Systema Top 1000 Stop Control Plus locking system for desk pedestals Stop Control Plus lock connector for cylinder cam lock Black plastic Securing plug For securing lock connector hole line 25 mm hole line 2 mm 9 054 4 9 054 45 200 1 048 851 5000 Locking bars Stop Control Plus Note: The correct locking bar is determined by adding together the drawer-front height units (HU). Hole line 25 mm: 1 HE = 50 mm Hole line 2 mm: 1 HE = 64 mm Length Length HE mm for hole line 25 mm 7 HE + 1 16 1067 486 200 8 HE + 1 66 106195 200 9 HE + 1 416 106196 200 12 HE + 1 566 106 200 200 Length Length HE mm for hole line 2 mm 7 HE + 1 9 1067 490 200 7,5 HE + 1 425 1067 491 200 8 HE + 1 457 1067 492 200 9 HE + 1 521 1067 49 200 Self-closing housing For Quadro Mini Duplex and KA 270 For mounting on the right-hand runner Lock activator must be ordered separately, refer to bottom of page Self-closing housing with integrated dampened closure Silent System For soft-closing Systema Top steel drawers For Quadro Mini Duplex and KA 270 For mounting on the right-hand runner Lock activator must be ordered separately, refer to bottom of page For installation width mm 80 1 056 41 100 92 1 055 525 90 For installation width mm 80 9 058 69 80 92 9 058 415 80 Lock activator For fitting to drawer Black plastic For installation width mm 80 1 074 88 1000 92 1 074 87 1000 14

Desk organisation system Systema Top 1000 Stop Control Plus locking system Assembly Fitting Stop Control housing Ball bearing slide KA 270 Quadro Mini Duplex Fitting lock connector to locking bar Mounting application Position Stop Control pin with steel drawer open Position Stop Control pin with steel drawer closed Mounting example cylinder lever lock max. 4 Notes: 1 Stop Control self-closing housings are required for each drawer but not for the pull-out pencil tray! The Stop Control self-closing housing attached to the runner must be mounted to the carcase in a way that allows the pin to engage in the recess in the locking bar. 15 25,5 15

Desk organisation system Systema Top 1000 Assembly 16

1 2 click 10 Dismounting steel drawers 17

Desk organisation system Systema Top 1000 Example 1 25 mm hole line with pencil tray A 80 +1 / 92 +1 17 20 20, 192 47 1 HE HE 6 HE 147 25 15 5,5 Ø 8 64 297 SKO 92 50 289 57,5 Ø5 14,5 5,7 2 7 29 165,5 264 21 292 +1, 1 ±0,25 A 52 50 70 Prevent lock connector from tipping! 18 ±0,5 0,5-0,1

Desk organisation system Systema Top 1000 Example 2 25 mm hole line without pencil tray A +1 0 92 +1 0 17 HE 60 25 HE 147 115 147 5,5 SKO 921 289 297 Ø5 14,5 2 5,7 165,5 29 21 292 264 6 HE 57,5 7 80 A 1 ±0,25 0,5 +1, -0,1 52 ±0,5 50 70 Prevent lock connector from tipping! 19

Desk organisation system Systema Top 1000 Example 2 mm hole line with pencil tray A 80 +1 / 92 +1 20 17 192 1 HE 2 HE 5 HE 61 125 62 17 64 17 25,8 SKO 924 Ø8 515 289 57,5 2 Ø5 22 5,7 2 7 29 165,5 264 21 292 +1, 1 ±0,25 A 52 50 70 Prevent lock connector from tipping! 20 ±0,5 0,5-0,1

Desk organisation system Systema Top 1000 Example 4 2 mm hole line without pencil tray A 80+1/ 92+1 17 2,5 HE 2,5 HE 64 157 2 11 62 157 SKO 922 289 17 Ø5 5 HE 57,5 2 5,7 22 29 7 165,5 264 21 292 +1, A 52 ±0,5 1 ±0,25 0,5-0,1 50 70 Prevent lock connector from tipping! 21

Desk organisation system Systema Top 1000 Example 5 Steel pedestal A +1 0 +0,7 17 81,8 ±0, 76,2-0, 18,8 Ø 2,8 Ø11 1 HE 10,5 SKO 99 Ø8 47 20 192 HE 110,9 18 44,8 147 0,4 0,4 150 0,4 90,4 15 104,2 0,4 7 10,5 110,4 80 1±0,1 +1, 0,5-0,1 A 71,5 +0,7-0, 85,5 0-0,5 50 70 C 80 22 295 100 6 HE 150 C 2 9 C 57,1 29 42,5 165,5 264 216,4 292 Material thickness Steel connector = 0,75 mm 297 57,5 1 ±0,1 25 50 0 +1 289

Needless to say, the modular Systema Top 1000 organiser system can also be used for steel pedestals (see example on page 22). If you have any questions concerning the parts list or alternative design options, please contact your Hettich system expert. 2

Cupboard organisation system OrgFrame Suspension filing cradle for unit depth 400 / 40 mm Hanging file frame AB For installation in units with drawer fronts or hinged doors Powder-coated steel black AL 9011 Customised sizes available on request AT IT IB Cabinet depth Exterior dimension Interior dimension Cabinet width* Division mm AB x AT mm IB x IT mm mm 400 717,0 x 52 709 x 26 800 2 x DIN A4 9 049 569 60 817,0 x 52 809 x 26 900 2 x Foolscap 905171 40 917,0 x 52 909 x 26 1000 2 x DIN A4 / 9 049 570 40 Foolscap plus rest 40 717,0 x 410 709 x 84 800 2 x DIN A4 9 049 571 40 * When using the suspension filing cradle with fixing brackets Ball bearing slide KA 705 For hanging file frames Over-extension 0 mm Without self-closing feature* Suitable for hole line 25 and 2 mm Load capacity 55 kg Black steel 22,5 10,7 For cabinet depth mm left right 64 400 9 050119 9 050120 20 40 9 050124 9 050125 20 * Available with self-closing feature on request 5, 126, Construction with fixing brackets EB 114,5 41,5 Construction without fixing brackets 2 Euro screw countersunk Panhead ø 6 x 1,7 mm For attaching KA 705 fixing brackets Nickel-plated steel Special screw ø 5 x 14 mm For fixing front panel Black steel 1008114 500 1 066 980 1000 24

Cupboard organisation system OrgFrame Suspension filing cradle for unit depth 400 / 40 mm Accessories Front stay Minimum front height in drawer-front height units (HU) for Hole line 2 mm: 4 HE = 256 mm Hole line 25 mm: 5 HE = 250 mm Powder-coated steel black AL 9011 41 5, 41,5 94 left right 9 049 470 9 049 471 100 Construction with fixing brackets Construction without fixing brackets Divider Nickel-plated steel / black plastic Door protector Black plastic For cradle depth mm 52 9 09 62 100 410 9 09 876 100 1075 522 200 Front Stop Control fixing bracket for KA 705 For combining with the Stop Control locking system Suitable for hole line 25 and 2 mm Galvanized steel ear fixing bracket for KA 705 Suitable for hole line 25 and 2 mm Galvanized steel left right 1077 947 1077 948 100 left right 107 979 107 980 100 25

Stop Control Plus locking system on both sides System components Locking bars, Stop Control Plus for hole line patterns 25 or 2 mm The length of the locking bar for Stop Control Plus always corresponds to the total of the drawer front height units. Locking bar, can be shortened to any length (tool required) further details on request Conversion to mm: Hole line 25: Total of the drawer front heights HE x 50 mm - 84 mm Hole line 2: Total of the drawer front heights HE x 64 mm - 119 mm Length Length HE mm for hole line 25 mm left right 10,5 441 1 067 982 1 067 98 200 1 566 1 06 199 1 06 200 200 19 866 1 06 202 1 06 20 200 19,5 891 1 067 21 1 067 22 100 21,5 991 1 067 29 1 067 0 200 25 1166 1069 048 1069 049 200 25,5 1191 1 069 050 1 069 051 50 Length Length HE mm for hole line 2 mm left right 10 521 1 067 8 1 067 84 200 11 585 1067 85 1067 86 200 16 905 1066 941 1066 942 200 Stop Control housing for KA 705 Catch for Stop Control Plus locking bar equired when not using lock connector left right 1049 20 1049 21 100 1066 86 500 Espagnolette lock activator For 6 mm dia. reduced to 5 mm For hole line patterns 25 or 2 mm Lock connector Stop Control Plus Suitable for hole line 25 and 2 mm left right 1019 272 1019 27 500 left right 1066 216 1066 217 100 Plastic plug with collar For pressing into hole line 1 048 851 5000 26

Stop Control Plus locking system on both sides Assembly Plastic plug Assembly/Disassembly Lock connector on locking bar Espagnolette lock activator Lock connector Locking bar Lock connector with height adjustable pin left right Lock connector may only be mounted on the top end of the locking bar. Locking bar Correct choice of locking bar The length of the locking bar for Stop Control Plus always corresponds to the total of the drawer front height units. Example Hole line 25 mm Hole line 2 mm HE 25 2 2 HE Drawer front panel Drawer front panel 4 146 150 = HE 7 HE Drawer front panel Drawer front panel 4 252 256 = 4 HE 5 HE Drawer front panel 1 HE Drawer front panel 11 HE Drawer front height i.e., requiring a locking bar in a length of 1 HU for 25 mm hole line Drawer front height i.e., requiring a locking bar in a length of 11 HU for 2 mm hole line 27

Cupboard organisation system OrgFrame Assembly 1 2 2 x ø6 x 1,7 2 x ø6 x 1,7 1 2 1 2 28

10 11 12 2 1 2 x ø5 x 14 2 x ø5 x 14 1 14 15 29

Cupboard organisation system OrgFrame Example 1 Hole line 25 mm SKO-09229 65,5 25 4 4 296 296 71 7,5 4 296 6 HE 6 HE 6 HE 4 4 296 296 71 250 00 00 75 9,5 25 Ø 5 75 min. 75 +1 0 0,5 +1, -0,5 20 ±0,5 min. installation depth +1 0 7 ±0,5 0

IW = 762/ 962 A +1 0 Internal height = height unit required - 2 x overlay +1 0 655,5/ 855,5 41 70,7/ 90,7 94,5 188,9 A min. 75 +1 0 min. 75 1

Cupboard organisation system OrgFrame Example 1 Hole line 2 mm SKO-0920 57,5 29 4 4 16 16 60 7,5 4 16 5 HE 5 HE 5 HE 4 4 16 16 80 256 20 20 64 9,5 2 Ø5 64 +1 min. 75 +1 0 min. 75 0,5 +1, -0,5 20 ±0,5 min. installation depth +1 0 7 ±0,5 2

IW = 762/ 962 A +1 0 Internal height = height unit required - 2 x overlay +1 0 655,5/ 855,5 70,7/ 90,7 102,2 196,6 41 A +1 min. 75 +1 0

4

Technical information Publisher's imprint ange of application Hettich drawer and runner systems are suitable for domestic and commercial furniture applications in living and bed rooms, kitchens, bathrooms and offices. Load Capacity and pull-out prevention The loading capacity (to DIN EN 158) is understood to mean the weight of the drawer itself including contents in kg. All Hettich runner systems feature guards to prevent the drawer from rolling out and being removed unintentionally and meet the requirements of the impact test in a test frame to DIN EN 158. Fitted in the proper manner, the runner systems featured in this catalogue are suitable for furniture defined in DIN 1407/74. The maximum drawer front height depends in particular on the material, the drawer measurements and the runner system. For further information please contact your Hettich representative. Corrosion testing Hettich drawer and runner systems meet corrosion requirements according to DIN EN 158, 72 hour condensation water testing according to EN 6720. General Technical Conditions The fitting instructions, screw-fixing points and loading information specified in this catalogue assume proper attachment using Hettich direct fixing screws or Hettich chipboard screws of the stated size in a cabinet material providing a screw pull-out resistance of > 1,000 N in accordance with DIN EN 20. Hettich accepts no responsibility for the use of materials or methods of attachment other than those stated. If other materials or methods of attachment are used, the furniture manufacturer is required to verify the system's -load-bearing capacity. General Terms of Sale and Delivery: All products and services will be provided exclusively on the basis of our General Terms of Sale and Delivery published on our website at www.hettich-agb.com. Publisher's imprint Hettich Marketing- und Vertriebs GmbH & Co. KG 2278 Kirchlengern Germany August 2010 We reserve all rights to this catalogue under copyright law. It shall not be permissible to duplicate this catalogue in any form either in whole or in part without our written consent. Subject to technical alterations. Errors and omissions excepted. Subject to colour variations. 5

Hettich Marketingund Vertriebs GmbH & Co. KG Vahrenkampstraße 12-16 2278 Kirchlengern Telephone +49 522 77-0 Fax +49 522 77-1948 info@de.hettich.com www.hettich.com 1056-SysTop1000-0810-HMV/EN