PAG 1/8 PREAMPLIFIERS - Class A FET Preamplifier 07X FET Phono Preamplifier 06X The Preamplifier 07X is Coda s flagship preamplifier, offering distortion-free preamplification and unsurpassed sonic performance with precision audiophile-grade components. Ultra High Class A Bias on Parralled FET Output Buffer. Stage with programmable gain on all inputs from Unity to + 18dB. Balanced and Unbalanced Inputs and Outputs. Extremely lownoise circuitry with no overall feedback. Double-sided gold-plated circuit boards. Fully remote controlled and learning. All anodized chassis. Dimensions: 43.2x6x25 cm (LxHxP). Weight: 7 kg. No overall feedback. DC-coupled design. Double-sided gold-plated circuit boards. All anodized chassis. 10 year warranty. Dimensions: 43.2x6x25 cm (LxHxP). The 06X is a phono preamplifier, featuring substantial active and passive component upgrades. Balanced and Unbalanced Inputs and Outputs. Switchable loading and gain for use with all cartridge types. Multiple paralleled input FETs for exceptionally low noise. All FET voltage gain with bipolar current gain. 7.500,00 $6,500.00 5.200,00 $4,500.00
PAG 2/8 INTEGRATED AMPLIFIER CSiB Integrated Amplifier Rated Power: 400 Watts per channel into 8Ω 800 Watts per channel into 4Ω Class A operation to 5 Watts into 8Ω 4 stereo RCA inputs, 1 stereo XLR input, tape & processor loops, subwoofer and preamplifier outputs Bandwidth: DC to -3dB @ 100kHz Distortion: Less than 0.04% from 10Hz to 20kHz at 400 Watts into 4-8 Amplifier Gain: 26dB Maximum Current: 150 Amperes peak per channel Signal/Noise Ratio: >110 db Slew Rate: >50 Volts per microsecond Damping Factor: >150 Input Impedance: 50k Ohms unbalanced 1k Ohms balanced Power Supply: 2.0 kva toroidal power transformer with separate windings for each channel. Dual independent rectification and 80,000 microfarad of power supply filter capacitance. Dimensions: 43x14x36 cm (LxHxP) Weight: 25 kg State-of-the-art, remote-controlled "seperates" performance with the added benefit of balanced audio inputs for even greater audio quality. Preamplifier section derived from the Coda 05X design, utilizing the PGA2320 digitally-controlled precision analog attenuator. Component upgrades include PRP audio resistors, Black Gate and Multicap capacitors, and high speed rectifiers for the preamp power supply. Coda CSX Precison Bias Class A/AB amplifier design, with discrete JFET differential input stage, VMOSFET voltage gain DC coupled to an ultra wideband bipolar output stage. Fully discrete amplifier FET differential input stage DC coupled to an ultra wideband bipolar output stage. No overall feedback. Separate tape monitor and processor loops Stereo subwoofer output Wideband, fully-regulated power supply with EMI and RFI line filtering 10 year warranty Designed, manufactured and assembled in the USA 6.950,00 $6,000.00
PAG 3/8 STEREO AMPLIFIER - S Series Stereo Amplifier S5.5 Stereo Amplifier S12.5 The S5.5 is a high bandwidth, Pure Class A Stereo Amplifier. Precision Bias Class A operation. 50 Watts per channel Pure Class A into 8 Ohms, 100 Watts per channel into 4 Ohms, 200 Watts per channel into 2 Ohms, 200 Watts mono in bridged mode into 8 Ohms, 400 Watts mono in bridged mode into 4 Ohms. Utilizing Coda s proprietary bias control topology. True DC-coupled design based on the high speed circuit topology of our System S100. Utilizing FET input; MOSFET Voltage gain and high speed bipolar current gain. No overall feedback. Sixty 50 MHz output transistors each rated at 8 Amperes and 150 Volts. Frequency Response: DC to 100kHz @ -3dB; Max Current: >100 Amperes peak per channel; Noise: >120dB. 10 year warranty. Dimensions: 44.5x15x32 cm (LxHxP). Weight: 21 kg The S12.5 is a high bandwidth, Class AB Stereo Amplifier. Precision Bias Class A/AB operation. Class A to 20 Watts, sliding to Class AB operation at higher power levels utilizing Coda s proprietary bias control topology 125 Watts per channel into 8 Ohms, 250 Watts per channel into 4 Ohms, 500 Watts per channel into 2 Ohms, 500 Watts mono in bridged mode into 8 Ohms. True DC-coupled design based on the high speed circuit topology of our flagship System S100; utilizing FET input, MOSFET Voltage gain, and high speed bipolar current gain. No overall feedback. Sixty 50 MHz output transistors each rated at 8 Amp and 150 Volts. Frequency Response: DC to 100kHz @ -3dB. Max Current: >100 Amp peak. Noise: >120dB. Remotecapable balanced and unbalanced input selection. Dimensions: 44.5x13.5x32 cm (LxHxP). Weight: 21 kg. 10 year warranty. 5.900,00 $5,100.00 5.900,00 $5,100.00 MULTICHANNEL AMPLIFIER - V Series Multichannel Amplifier V5a The V5a is a special purpose amplifier for high power multichannel applications. Precision Bias Class A/AB operation, Class A to 25 Watts RMS into 8 Ohms. Four channel mode: 120 Watts x 4, Three channel mode: 400 Watts x 1 and 120 Watts x 2, Two channel mode: 400 Watts x 2. FET input with bipolar current gain and no overall feedback. Proprietary protection circuit guards against incoming DC and oscillation. Remote controlled balanced and unbalanced input selection. Remote controlled true standby circuit activates bias current in output stage. Double-sided gold-plated circuit boards. Frequency Response: DC to -3dB @ 100kHz. Gain: 26dB. Noise: -100dB. Max current: >60 Amperes peak per channel. Dimensions: 44.5x13.5x32 cm (LxHxP) Weight: 21 kg 10 year warranty 5.900,00 $5,100.00
PAG 4/8 STEREO AMPLIFIER - T Series Stereo Amplifier TS MONO AMPLIFIER - T Series Monoblock Amplifier TM True state-of-the-art high-performance, high-current amplifier in an affordable, hand crafted chassis. 400 Watts per channel into 8 Ohms, 800 Watts per channel into 4 Ohms, 1 Ohm load stable. Precision Bias Class A operation to 10 Watts, sliding to Class AB at higher output level. Fully discrete FET differential input stage DC coupled to an ultra wideband bipolar output stage. Very high linear damping with minimal feedback. AC-coupled unbalanced input and true DC coupled balanced input. 3.0 kva toroidal power transformer. Max Current: >150 Amp (peak). Noise: >-110 db; Slew Rate: >50 V/us; Bandwidth: 5Hz to 100kHz. Dimensions: 43x14x36 cm (LxHxP). Weight: 30 kg. State of the art High Current Monoblock Amplifier - 800 Watts into 8 Ohms load, 2 Ohm load stable. Class A operation to 10 Watts, Max Current: >150 Ampere peak. Bandwidth: 5Hz to 100kHz. Fully balanced design utilizing a discrete FET differential input VMOSFET voltage gain stage stage DC coupled to a nonbridged ultra wideband bipolar output stage. Coda s Precision Bias technique yields a seemless transition from Class A operation regardless of the complexity of the load impedance. Very high linear damping. AC-coupled unbalanced input and true DC-coupled balanced input. 3.0 kva toroidal power transformer with independant rectifiers and 80.000 uf of capacitance. Noise: >-110 db, Slew Rate: >50 V/microsecond. Output impedance: 0.04 Ohms from 20Hz to 20kHz. Gold plated FR-4 glass epoxy printed circuit boards, WBT connectors. Carefully selected and evaluated audiophile grade parts, rigorously tested using both objective & subjective techniques. Dimensions: 43x14x36 cm (LxHxP) Weight: 30 kg 10 year warranty 6.000,00 $5,200.00 5.900,00 each $5,100.00 each
PAG 5/8 C SERIES COMPONENTS Preamplifier CL CP Phono and Line Preamplifier True state-of-the-art remote controlled performance in an affordable, hand-crafted chassis. Discrete Class A MOSFET Buffer Stage for smoother, more detailed sound, Independent unity gain / variable gain adjustment for each input. No overall feedback. 1 balanced and 3 unbalanced input; Balanced and unbalanced output; Separate tape monitor and processor loops (unbalanced). Digitally controlled attenuator design utilizing the Burr-Brown PGA2310. Frequency Response: 5 Hz-200 khz, THD: < 0.02% from 10Hz to 40kHz @ 5V peak into 600 Ohms. Max Output: 10 Volts peak. Noise: >100dBA. Dimensions: 43x6.5x31 cm (LxHxP). Weight: 8 kg. 10 year warranty. True state-of-the-art remote controlled performance in an affordable, hand-crafted chassis. Discrete Class A MOSFET Gain Stage for smoother, more detailed sound, Independent variable gain adjustment for each input. No overall feedback. 1 balanced, 1 phono and 3 unbalanced inputs; Balanced and unbalanced outputs; Separate processor loop (unbalanced). SMOBC (solder mask over bare copper) FR-4 glass epoxy printed circuit boards. Wideband, fully-regulated power supply with EMI and RFI line filtering. Frequency Response: 5 Hz-200 khz; THD: < 0.02% from 10Hz to 40kHz @ 6V peak into 600 Ohms. Max Output: 10 Volts peak. Noise: >100dBA. Dimensions: 43x6.5x31 cm (LxHxP). Weight: 8 kg. 10 year warranty 2.900,00 $2,500.00 4.000,00 $3,500.00
PAG 6/8 STEREO AMPLIFIER Precision Bias Class A operation Stereo Amplifier 15.5 Frequency Response: DC to 100kHz @ -3dB, Distortion: < 0.02% from 10Hz to 20kHz @ rated power, Gain: 26dB, Maximum Current: >100 Ampere peak per channel. Noise: -120dB; Output Impedance: 0.03 Ohm from 20Hz to 20kHz; Bridged Mono: 600 Watts Class AB @ 8 Ohms, 1200 Watts Class AB @ 4 Ohms. Outuput Impedance: 0.06 Ohm from 20Hz to 20kHz; Max Current: >100A peak; Noise: >120dB. Dimensions: 44.5x19.7x48.3 cm (LxHxP) Weight: 50 kg Made in USA The 15.5 is Coda s flagship Class A Stereo Amplifier. Optimized for class A operation the 15.5 is better suited to low-impedance speaker systems where high current capability yields superior performance. 150 Watts per channel into 8 Ohms, 300 Watts per channel into 4 Ohms. Precision Bias Class A operation to 100 Watts, sliding to Class AB at higher output level. Ultra High Current non-bridged design; Fully discrete FET differential input stage; Vertical MOSFET Voltage Gain Stage; DC coupled to an ultra wideband bipolar output stage; Very high linear damping with minimal feedback. AC-coupled unbalanced input and true DC coupled balanced input. Double-sided gold plated circuit boards. 3.0kVA toroidal power transformer; Low-impedance power supply filter capacitor array. Graphite anodize aluminum and stainless steel finish. Power supply and Bias status indicators. 10 year warranty 12.700,00 $11,000.00
PAG 7/8 STEREO AMPLIFIER Precision Bias Class A & Class AB operation Stereo Amplifier 40.0 Frequency Response: DC to 100kHz @-3dB. Distortion: < 0.02 percent from 10Hz to 20kHz @ rated power. Gain: 26dB. Maximum Current: >100 Amperes peak per channel. Noise: -120dB. Output Impedance: 0.03 Ohm from 20Hz to 20kHz. Bridged Mono: 1500 Watts Class AB @ 8 Ohms. Gain: 32dB. Output Impedance: 0.06 Ohm from 20Hz to 20kHz; Dimensions: 44.5x19.7x48.3 cm (LxHxP). Weight: 50 kg. Made in USA. The 40.0 is Coda s flagship Class AB stereo amplifier. 400 Watts per channel into 8 Ohms, 800 Watts per channel into 4 Ohms, > 1500 Watts per channel into 2 Ohms, 1 Ohm load stable. Ultra High Current non-bridged design. Precision Bias Class AB operation utilizing Coda s proprietary bias control topology. Fully discrete FET differential input stage. Vertical MOSFET Voltage Gain Stage. DC coupled to an ultra wideband bipolar output stage. Very high linear damping with minimal feedback. AC-coupled unbalanced input and true DC coupled balanced input. Double-sided gold plated circuit boards. 3.0kVA toroidal power transformer. Low-impedance power supply filter capacitor array. Graphite anodize aluminum and stainless steel finish. Power supply and Bias status indicators. 10 year warranty. 12.700,00 $11,000.00
PAG 8/8 MONO AMPLIFIER Precision Bias Class A & Class AB operation Mono Amplifier 60.0 1000 Watts Class AB @ 4 Ohms 500 Watts Class AB @ 8 Ohms Frequency Response: DC to -3dB @ 100kHz; Distortion: < 0.02 percent from 10Hz to 20kHz @ rated power; Gain: 32dB; Maximum Current: >120 Amperes peak; Noise: -120dB reference to rated output; Input Impedance: 10k Ohms balanced. Output Impedance: 0.06 Ohms from 20Hz to 20kHz. Power Filtering: 184.000 microfarad. The 60.0 is Coda s flagship Class AB Mono Amplifier. Precision Bias Class AB operation utilizing Coda s proprietary bias control topology. High Current amplifier design. Fully discrete FET differential input stage, Vertical MOSFET Voltage Gain Stage, DC coupled to an ultra wideband bipolar output stage. Very high linear damping with minimal feedback, AC-coupled unbalanced input and true DC coupled balanced input, Double-sided gold plated circuit boards, 3000VA toroidal power transformer, Lowimpedance power supply filter capacitor array. Extremely wide bandwidth transistors are used in the output stage instead of the usual TO3 devices used in other output designs. Each channel uses 28 individual output transistors with a combined power rating of 1500 Watts and 120 Amperes with a bandwidth of 50 Mhz. Graphite anodize aluminum and stainless steel finish. Power supply and Bias status indicators. Designed, manufactured and assembled in the USA. 10 year warranty. Dimensions: 44.5x19.7x48.3 cm (LxHxP) - Weight: 50 kg. 12.700,00 each $11,000.00 each