Instructions of Mobile Phone Monitoring Our DVRs can support mobile phone monitoring as long as those phones have one of the 5 operating systems:windowsmobile, Symbian3, Symbian5, Apple(IP-home), Blackberry, Google. For example, all the following models can be used for monitoring: dopodp660, Blackberry 8900/8910/8980/9000/9630/9650/9700/9780/9800, Nokia N78/N95/E66/5800W, Iphone4 and so on. Please refer to the specific operating steps bellow: 1.Setting methods of monitoring via mobile phones 1.1 DVR Please make sure the DVR has the right settings: User:admin Password:88888888 Sever Port can be given from 1000 to 9999.The default port is 3357,which have to be mapped on the router.the mapping way is the same as that in the network settings of DVRs. 1.2 Mobile phones 1.2.1 Operating Steps for Windows Mobile There is a folder named 3G software in the disk accompanied with the sold DVR. You can find a program, MEye windows CAB. Please copy it to your mobile phone. Generally, it will be saved in your memory card, as the picture A1 shows: A-1 Click the program. It s OK to choose the default place to install it after the initialization. Please see picture A2 bellow:
A-2 When the installation finished, click the icon Meye to run the program as the image shows bellow. The default main interface [Channel]-Choose the video channel you want to connect; [Connect]-Click to connect automatically to the real time image of the settled channel; [Setup]-Click to set up parameters for mobile phone monitoring. There are buttons below the window. From left to right, they are: [Direction control for PTZ] (Move PTZ from left to right, up, down) [Area selection] (Select zooming area) [Focus] (Zoom in/ out) [Aperture] (Zoom in/ out) [Screenshots] Notes: If you want to control PTZ via mobile phone, please make sure the PTZ parameters in DVR are setting correct, and then select the corresponding video channel in your phone. Screenshots are saved at the installation location <the path is Resource Explorer/Program rogram Files/Meye/Photo Folder older>.if you use it for the first time or you need to revise parameters, please click the button[setup] to set it. Or, you can click [Connect] to enter the monitor screen. User: the same as that settled at [mobile phones monitoring name] in your DVR Password: the same password as given at [monitor via mobile phone password] in your DVR. Server: the IP address or DDNS of the public network your DVR connected to. Server Port: the same as that settled at [monitor via mobile phone] in your DVR Channel No.: Set the default channel of monitoring
When all of these above are set and save correct, click [OK] to return to the previous main interface. Two modes of video displaying are opotional: normal and full screen. You can click the screen to change between them. 2 Operating Steps for Symbian Please copy the MEYE_ZSXW_3rd.sisx or MEYE_ZSXW_5rd.sisx from the file named 3G Software in our Disk to your phone. Generally, it will be saved in your memory card. (Refer to the picture A1) A1 A2 A3 ⑴ Double click to install the program as the image A2 ⑵Two installation locations are available, the memory card or SD card, as shown in image A3 Select Next in the dialogue box to make sure the program will get access to the network. Please refer to the image A4.
A4 A5 ⑶ Get installations successfully, as the picture-a5 shows. A6 A7 ⑷ When the program was installed in the SD card, please find the icon of monitoring in [application programs], please follow the picture A6 above. ⑸ Select the icon and click to run it, and then you can see the initial interface as image A7.The functions of the buttons in the screen are as follows: 1-channel 1;channel 2 5-variabl + zoom + aperture 9-screenshots 2-channel 3;channel 4 6-variabl zoom aperture 1010-setup 3-PTZ:up;PTZ:down 7-play/pause 11-exit 4-PTZ:left;PTZ:right 8-full screen/normal Note:Screenshots are saved in the default location; the path is C:\Data\Images\. If you use it for the first time or you need to revise parameters, please click the button setting. If not, please click [play] to enter the monitor screen.
⑹ The reason why software can not be installed into mobile phones: The software can not be trusted by mobile phones for its self-signed certificate. We can solve this problem by doing the setting bellow:enter Menu->Tools->Setup->Application Program->Program Management->Software Installation->Select All ⑺ Setup of client software 1Select the default access point: CMNET. GPRS. 3G 2Server Address: the IP address of DVR (e.g.:121.34.39.29) 3Server Port: the information port of DVR(Default:3357) 4User: admin 5Password: the password for hard disk formatting in DVR (default:88888888) ⑻ Mobile phone models supported by the program: symbian s60 v3.0 symbian s60 v5.0 5800XM N97 N71 N73 N75 N76 N77 N78 N80 N81 N82 N91 N92 N93 N93i N95 N96 N97 E50 E61 E61i E62 E60 E70 E71 E66 E90 5700 6110 6120 6220 6121 6122 6290 6110Navigator N80 3250 5500 5700 5320 5800 6210N 6220 6650F E63.E66 E71 N79 N85 N96 E61i symbian s60 v3.0i400 i408 i450 i458 i500 i550 i520 i560 i570
i558 G810 G818 I8510 Mobile Pocket SGH-i718 i900 i1859 i728 i780 i617 i608 i718 i710 i760 i200 i688 i620 i315 I908E Mobile Pocket MPX220 MPX Q8 Q7 V1000 PC 686 696 696i 699 700 818 828+ 838 900 830 MUSE CHT9000 P800 M700 C858 9100 9110 D600 U1000 P4550 P3450 D802 E806c S1 P5500 Mobile E616 P860 D805 Touch DUAL Pocket PC Diamond P3470 P660 S600 S900 X7510 C730 E616 E806c P3600i P4550 P860 U1000 99 818 Pro 818 P9000 700 696i E806c S700 S730 C858 900 Mobile Pocket PC ET-280 ET-560 ET-580 ET-960 ET-980 XP618 ET860 ET800 ET600 Mobile Pocket PC N810 N800 N8 E870 E860 E800 N7 O2 Cocoon O2 Flame O2 Helen O2 XDA Atom Mobile Pocket PCXDA Graphite O2 XDA Zinc O2 Xda Argon O2 Cosmo O2 Xda Atom O2 Xda Orbit O2 Xda Stealth Mobile Pocket 惠 普 ipaq rw6818 PC HW6515 Mobile Pocket PC M930w P320 P560 兰 博 基 尼 ZX1 P526 P735 P535 P750 P550 技 嘉 Mobile Pocket MS800 MS804 MS808 MS820 g-smart I i128 i300c PC i350 t600 i300
Introduction for iphone Software Installation 一 Installation for zmeye plus Ⅰ.Open on iphone, as shown in the following Picture 1: Picture 1 Ⅱ.Click,input zmeye plus in the search box,then click the following Picture 2 as shown in
Picture 2 Ⅲ. As shown in the following Picture 3 Picture 3 Ⅳ.Chick on Picture 4 on picture ictureⅢ, then it will appear as shown in the Picture 4,chick,Next will appear as shown in the Picture 5,in the Picture 5, iput your Account no and Passward,then click 6., As shown in the following Picture
Picture4 Picture5 Picture 6 Ⅴ.In the Picture 6,when turn infto, The status indicate that zmeye plus software is in downloading and will install automatically,, the installation successfully completed when the progress bar show as.
Ⅵ.When the Installation is completed, the iphone interface display zmeye plus icon, As shown in the following Picture 7 Picture 7 二 Introduction for how to use zmeye plus Ⅰ Click zmeye plus icon to open the soft ware,the Interface function keys are described as below: : 1PTZ direction control key (up/ down/ left / right ) 2 PTZ Camera control (zoom in +, Zoom Out -),( focus increase + focus decrease -),( Aperture increase +, Aperture decreases -).
3Select the Monitoring channel 4 Button functions from left to right: Pause, snapshot, full screen mode, choose the next Group monitoring and monitoring connection settings 5Exit, the button on the middle of iphone. Ⅱ Set the monitory point,the setting methods are same as android, no further explanation here Sybian, and Windows. 1Monitory point IP address.(121.34.56.247) 2Port Forwarding (3357) 3User name (admin) 4Passward (88888888)