2015 2016 Enrollment Opportunities for High School Students at Rockingham Community College

2015 2016 Enrollment Opportunities for High School Students at Rockingham Community College If you have questions or would like more information about NC Career and College Promise (CCP), contact: Chandra Caple, Director of Educational Partnerships James Library Basement 336-342-4261, ext. 2130 caplec@rockinghamcc.edu If you have questions about Rockingham Community College (RCC) Application, contact: Derick Satterfield, Director of Enrollment Services Whitcomb Student Center 336-342-4261, ext. 2114 satterfieldd@rockinghamcc.edu RCC/CCP 3-3-15 Page 1

OVERVIEW Career and College Promise Pathways at Rockingham Community College (RCC) provide an opportunity for high school students to earn college credit transferable to all UNC System Institutions and many NC Independent Colleges and Universities, a credential, certificate or diploma in a technical career or a high school diploma and two years of college credit through the Rockingham Early College High School. Students who meet the eligibility requirements may enroll in one pathway. Students must select one program of study under the College Transfer Pathway or the Career Technical Pathway. 1. College Transfer: The Career and College Promise College Transfer Pathway (tuition-free fall and spring semesters only) requires the completion of at least thirty semester hours of transfer courses, including English and mathematics, and College Transfer Success (ACA 122). To be eligible students must: be a junior or senior, have a weighted GPA of 3.0 on high school courses demonstrate college readiness on placement tests complete an online Rockingham Community College application complete the Career and College Promise Enrollment Form For those unable to demonstrate college readiness on placement tests, Provisional Status is an option. To be eligible for Provisional Status students must: have a cumulative weighted GPA of 3.5 have completed two years of high school English with a grade of C or higher have completed high school Algebra II (or higher level math class) with a grade of C or higher obtain the written approval of the high school principal or his/her designee obtain written approval of the community college president or his/her designee may initially only enroll in college math and college English within the chosen pathway 2. Career Technical: Earn tuition-free (fall and spring semesters only) college credits toward an entry-level job credential or a certificate or diploma aligned with a High School Career Cluster. RCC offers Automation Systems, Cosmetology, Criminal Justice Technology, Early Childhood Education, Machining and Welding Technology. To be eligible students must: a junior or senior have a weighted GPA of 3.0 on high school courses or recommendation of principal or his/her designee meet the prerequisites for the career pathway complete an online Rockingham Community College application complete the Career and College Promise Enrollment Form RCC/CCP 3-3-15 Page 2

Qualified freshman and sophomore students are allowed to enroll in the Career Technical Pathway. However, they may only enroll in an industrial technology or engineering technology program. At RCC, Machining and Welding are the programs. In addition to completing the RCC online application and the CCP Enrollment Form to be eligible for enrollment: A qualified freshman must: have passed Math I with a grade of C or better scored a 3 or 4 on the EOC for Math I meet the college ready reading score of 16 on the 8 th grade Explore Test meet prerequisites for the career pathway have the recommendation of the high school principal or his/her designee (based on assessment of student maturity and ability to effectively participate in a class that may include adult students). A qualified sophomore must: have passed Math I with a grade of C or better scored a 3 or 4 on the EOC for Math I meet the college ready reading score of 16 on the 8 th grade Explore Test have a weighted GPA of 3.0 on high school courses meet prerequisites for the career pathway have the recommendation of the high school principal or his/her designee (based on assessment of student maturity and ability to effectively participate in a class that may include adult students) To maintain eligibility for continued enrollment in the College Transfer and Career Technical Pathways, a student must: continue to make progress toward high school graduation. maintain a GPA of 2.0 in college coursework after completing two courses. a student who falls below a GPA of 2.0 after completing two college courses will be subject to the college s policy for satisfactory academic progress. 3. Innovative High Schools (option only available to rising freshmen) Begin earning tuition-free college credits as a high-school freshman by attending the Rockingham Early College High School. For more information contact the Early College at (336) 342-4261 Ext 2605. RCC/CCP 3-3-15 Page 3

Home/Private School Students Home school and private high school students who reside in North Carolina and meet the eligibility requirements are allowed to enroll in a Career and College Promise Pathway. Students enrolled in the College Transfer and Technical Career Pathways are exempt from tuition but are responsible for textbooks and the RCC technology and parking fees. COURSES Rockingham Community College reserves the right to make changes in regulations, courses, schedules, fees, office locations and other matters of policy and procedures when necessary. The Career and College Promise booklet is not a guarantee of courses, programs and services offered by the College. Students may enroll in any available class listed on their pathway. See pathways on pages 17-22. The following courses are scheduled at the preferred traditional high school time frame. Additional courses are available at various times. Please refer to the Course Schedule located on the website: http/www.rockinghamcc.edu/credit-programs/schedule.htm College Transfer Pathway Fall 2015 ACA 122 MW 1 1: 50 PM ART 111 MWF 8 8:50 AM COM 231 TTh 12:30 1:45 PM ECO 251 M-S On Line ECO 252 M-S On Line ENG 111 MWF 8 8:50 AM ENG 112 TTh 12:30 1:45 PM HIS 131 MWF 1:00 1:50 PM MAT 171 M-F 8 8:50 AM MAT 172 M-F 8 8:50 AM PSY 150 TTh 12:30 1:45 PM SOC 210 TTh 8:00 9:15 AM RCC/CCP 3-3-15 Page 4

Spring 2016 ACA 122 MW 1:00 1: 50 PM ART 111 TTh 8:00 9: 15 AM COM 23l TTh 12:30 1: 45 PM ECO 251 M-S On Line ECO 252 M-S On Line ENG 111 MWF 8:00 8:50 AM ENG 112 TTh 12:30 1:45 PM HIS 132 MWF 1:00 1:50 PM MAT 172 M-F 8:00 8:50 AM MAT 271 M-F 8:00 8:50 AM PHI 240 TTh 12:30 1:45 PM PSY 150 TTh 12:30 1:45 PM ACA 122 College Transfer Success (1 credit) This course provides information and strategies necessary to develop clear academic and professional goals beyond the community college experience. Topics include the CAA, college culture, career exploration, gathering information on senior institutions, strategic planning, critical thinking and communications skills for a successful academic transition. ART 111 Art Appreciation Prerequisite: ENG 090 and RED 090 (3 credits) This course introduces the origins and historical development of art. Emphasis is placed on the relationship of design principles to various art form including but not limited to sculpture, painting, and architecture. COM 231 Public Speaking Prerequisite: ENG 090, RED 090 or DRE 098 (3 credits) This course provides instruction and experience in preparation and delivery of speeches within a public setting and group discussion. Emphasis is placed on research, preparation, delivery and evaluation of informative, persuasive and special occasion public speaking. ECO 251 Principles of Microeconomics Prerequisites: MAT 070 or DMA 010, 020, 030, 040, 050; ENG 090, RED 090 or DRE 098 (3credits)This course introduces economic analysis of individual, business, and industry in the market economy. Topics include the price mechanism, supply and demand, optimizing economic behavior, costs and revenue, market structures, factor markets, income distribution, market failure, and government intervention. Upon completion, students should be able to identify and evaluate consumer and business alternatives in order to efficiently achieve economic objectives. RCC/CCP 3-3-15 Page 5

ECO 252 Principles of Macroeconomics Prerequisites: MAT 070 or DMA 010, 020, 030, 040, 050; ENG 090, RED 090 or DRE 098 (3 Credits) This course introduces economic analysis of aggregate employment, income, and prices. Topics include major schools of economic thought; aggregate supply and demand; economic measures, fluctuations, and growth; money and banking; stabilization techniques; and international trade. Upon completion, students should be able to evaluate national economic components, conditions, and alternatives for achieving socioeconomic goals. This course has been approved for transfer under the Comprehensive Articulation Agreement (CAA). See the College Transfer section of the catalog on pages 173-181 for information about the CAA and the transfer designation of this course. ENG 111 Expository Writing Prerequisites: ENG 090 & RED 090 or DRE 098 (3 credits) This course is the required course in a series of two designed to develop the ability to produce clear expository prose. Emphasis is placed on the writing process including audience analysis, topic selection, thesis support and development, editing, and revision. ENG 112 Writing/Research in the Disc Prerequisites: ENG 111 (3credits) This course, the second in a series of two, introduces research techniques, documentation styles, and writing strategies. Emphasis is placed on analyzing information and ideas and incorporating research findings into documented writing and research projects. Upon completion, students should be able to evaluate and synthesize information from primary and secondary sources using documentation appropriate to various disciplines. HIS 131 American History I Prerequisites: ENG 090, RED 090 or DRE 098 (3credits) This course is a survey of American history from pre-history through the Civil War era. Topics include the migrations to the Americas, the colonial and revolutionary periods, the development of the Republic, and the Civil War. Upon completion, students should be able to analyze significant political, socioeconomic, and cultural developments in early American history. HIS 132 American History II Prerequisites: ENG 090, RED 090 or DRE 098 (3credits) This course is a survey of American history from the Civil War era to the present. Topics include industrialization, immigration, the Great Depression, the major American wars, the Cold War, and social conflict. Upon completion, students should be able to analyze significant political, socioeconomic, and cultural developments in American history since the Civil War. RCC/CCP 3-3-15 Page 6

MAT 171 Precalculus Algebra Prerequisites: DMA 010, 020, 030, 040, 050, 060, 070, 080 or MAT 121 (4 credits) This course is designed to develop topics which are fundamental to the study of Calculus. Emphasis is placed on solving equations and inequalities, solving systems equations and inequalities, and analysis of functions (absolute value, radical, polynomial, rational, exponential, and logarithmic) in multiple representations. MAT 172 Precalculus Trigonometry Prerequisites: MAT 171 (4 credits) This course is designed to develop an understanding of topics which are fundamental to the student of Calculus. Emphasis is placed on the analysis of trigonometric functions in multiple representations, right and oblique triangles, vectors, polar coordinates, conic sections, and parametric equations. MAT 271 Calculus Prerequisites: MAT 172 or MAT 175 (4 credits) This course is designed to develop the topics of differential and integral calculus. Emphasis is placed on limits, continuity, derivatives and integrals of algebraic and transcendental functions of one variable. PHI 240 Introduction to Ethics Prerequisites: ENG 111 (3credits)This course introduces theories about the nature and foundations of moral judgments and applications to contemporary moral issues. Emphasis is placed on moral theories such as consequentialism, deontology, and virtue ethics. Upon completion, students should be able to apply various ethical theories to moral issues such as abortion, capital punishment, poverty, war, terrorism, the treatment of animals, and issues arising from new technologies. PSY 150 General Psychology Prerequisites: ENG 090, RED 090 or DRE 098 (3credits) This course provides an overview of the scientific study of human behavior. Topics include history, methodology, biopsychology, sensation, perception, learning, motivation, cognition, abnormal behavior, personality theory, social psychology, and other relevant topics. Upon completion, students should be able to demonstrate a basic knowledge of the science of psychology. SOC 210 SOCIOLOGY Prerequisites: ENG 090, RED 090 or DRE 098 (3 credits) This course introduces the scientific study of human society, culture, and social interactions. Topics include socialization, research methods, diversity and inequality, cooperation and conflict, social change, social institutions, and organizations. RCC/CCP 3-3-15 Page 7

Career Technical Pathway (Students must select one Program of Study) Automation Systems Fall 2015 ELC 112 M-F 8:15 11:15 AM ELC 120 M-F 8:15 11:15 AM ISC 112 M-F 8:15 11:15 AM Spring 2016 ELC 117 M-F 8:15 11:15 AM ELC 128 M-F 8:15 11:15 AM ELC 112 DC/AC Electricity Corequisite: MAT 080 or DMA 010, 020, 030, 040, 050, 060, 070, 080 (5 credits) This course introduces the fundamental concepts of and computations related to 1DC/AC circuits, components, operation of test equipment; and other related topics ELC 117 Motors and Controls Prerequisites: ELC 111 or ELC 112 or ELC 131 or ELC 139 (4credits) This course introduces the fundamental concepts of motors and motor controls. Topics include ladder diagrams, pilot devices, contractors, motor starters, motors, and other devices. ELC 120 Intro to Wiring (3credits) This course is an introduction to wiring concepts for non-electricians. Topics include safety, tools, materials, techniques and terminology associated with electrical wiring. Upon completion, students should be able to use and/or identify wiring tools, materials and procedures at an introductory level. ELC 128 Intro to PLC Prerequisites: ELC 117 (3credits) This course introduces the programmable logic controller (PLC) and its associated applications. Topics include ladder logic diagrams, input/output modules, power supplies, surge protection, selection/installation of controllers, and interfacing of controllers with equipment. Upon completion, students should be able to install PLCs and create simple programs. ISC 112 Industrial Safety (2credits) This course introduces the principles of industrial safety. Emphasis is placed on industrial safety and OSHA and environmental regulations. Upon completion, students should be able to demonstrate knowledge of a safe working environment and OSHAcompliance. RCC/CCP 3-3-15 Page 8

Early Childhood Education Fall 2015 EDU 119 TTh 12:30 2:20 PM EDU 144 MW 8 9:15 AM Spring 2016 EDU 145 MW 8 9:15 AM EDU 119 Introduction to Early Childhood Education (4 credits) This course covers the foundations of the education profession, the diverse educational settings for young children, professionalism and planning developmentally appropriate programs for all children. Topics include historical foundations, program types, career options, professionalism and creating inclusive environments and curriculum responsive to needs of all children and families. EDU 144 Child Development I Prerequisites: ENG 090 & RED 090 or DRE 098 (3 credits) This course includes the theories of child development, needs, milestones, and factors that influence development, from conception through approximately 36 months. Emphasis is placed on developmental sequences in physical/motor, emotional/social, cognitive, and language domains and the impact of multiple influences on development and learning. EDU 145 Child Development II Prerequisites: EDU 144 (3 credits) This course includes the theories of child development, needs, milestones, and factors that influence development, from preschool through middle childhood. Emphasis is placed on developmental sequences in physical/motor, emotional/social, cognitive, and language domains and the impact of multiple influences on development and learning. Cosmetology Fall 2015 COS 111AB F 8:15 10:15 AM COS 112AB M-Th 8:15 11:15 AM Spring 2016 COS 111BB F 8:15 10:15 AM COS 112BB M-Th 8:15 11:15 AM COS 111AB Cosmetology Concepts I Prerequisites: CIS 070; ENG 090; RED 090 Or DRE 098 Corequisites: COS 112AB (2 credits) This course introduces basic cosmetology concepts. Topics include safety, first aid, sanitation, bacteriology, anatomy, diseases and disorders, hygiene, product knowledge, chemistry, ethics, manicures, and other related topics. RCC/CCP 3-3-15 Page 9

COS 111BB Cosmetology Concepts I Prequisites: COS 111AB Corequisites: COS 112BB (2 credits)this course introduces basic salon services. Topics include scalp treatments, shampooing, rinsing, hair color, design, haircutting, permanent waving, pressing, relaxing, wigs, and other related topics. Upon completion, students should be able to safely and competently demonstrate salon services. COS 112AB Salon I Prerequisites: CIS 070; ENG 090; RED090 or DRE 098 Corequisites: COS 111AB (4 credits)this course introduces basic salon services. Topics include scalp treatments, shampooing, rinsing, hair color, design, haircutting, permanent waving, pressing, relaxing, wigs, and other related topics. COS 112BB Salon I Prerequisites: COS 112AB Corequisites: COS 111BB (4 credits)this course introduces basic salon services. Topics include scalp treatments, shampooing, rinsing, hair color, design, haircutting, permanent waving, pressing, relaxing, wigs, and other related topics. Upon completion, students should be able to safely and competently demonstrate salon services. Criminal Justice Fall 2015 CJC 111 MWF 8 8:50 AM CJC 112 TTh 7:50 -- 9:05 AM Spring 2016 CJC 113 TTh 7:50 -- 9:05 AM CJC 141 MWF 8 8:50 AM CJC 111 Introduction to Criminal Justice Prerequisites: ENG O90 & RED 090 or DRE 098 (3 credits) This course introduces the components and processes of the criminal justice system Topics include history, structure, functions and philosophy of the criminal justice system and their relationship to life in our society. CJC 112 Criminology Corequisites: ENG 090, RED 090 or DRE 098 (3credits) This course introduces deviant behavior as it relates to criminal activity. Topics include theories of crime causation; statistical analysis of criminal behavior; past, present, and future social control initiatives; and other related topics. Upon completion, students should be able to explain and discuss various theories of crime causation and societal response. RCC/CCP 3-3-15 Page 10

CJC 113 Juvenile Justice Corequisites: ENG 090, RED 090 or DRE 098 (3credits)This course covers the juvenile justice system and related juvenile issues. Topics include an overview of the juvenile justice system, treatment and prevention programs, special areas and laws unique to juveniles, and other related topics. Upon completion, students should be able to identify/discuss juvenile court structure/procedures, function and jurisdiction of juvenile agencies, processing/detention of juveniles, and case disposition. CJC 141 Corrections Prerequisites: ENG 090 & RED 090 or DRE 098 (3 credits) This course covers history, major philosophies, components and current practices and problems of the field of corrections. Topics include historical evolution, functions of the various components, alternatives to incarceration, treatment program, inmate control and other related topics. Machining Fall 2015 BPR 111 M-F 8:15 11: 15 AM ISC 112 M-F 8:15 11: 15 AM MAC 111A M-F 8:15 11: 15 AM MAC 114 M-F 8:15 11: 15 AM Spring 2016 MAC 111B M-F 8:15 11: 15 AM MAC 122 M-F 8:15 11: 15 AM MAC 124 M-F 8:15 11: 15 AM BPR 111 Blueprint Reading (2credits) This course introduces the basic principles of blueprint reading. Topics include line types, orthographic projections, dimensioning methods, and notes. Upon completion, students should be able to interpret basic blueprints and visualize the features of a part. ISC 112 Industrial Safety (2credits) This course introduces the principles of industrial safety. Emphasis is placed on industrial safety and OSHA and environmental regulations. Upon completion, students should be able to demonstrate knowledge of a safe working environment and OSHAcompliance. RCC/CCP 3-3-15 Page 11

MAC 111A Machining Technology I (3credits)This course introduces machining operations as they relate to the metalworking industry. Topics include machine shop safety, measuring tools, lathes, drilling machines, saws, milling machines, bench grinders, and layout instruments. Upon completion, students should be able to safely perform the basic operations of measuring, layout, drilling, sawing, turning, and milling. MAC 111B Machining Technology I (3credits)This course introduces machining operations as they relate to the metalworking industry. Topics include machine shop safety, measuring tools, lathes, drilling machines, saws, milling machines, bench grinders, and layout instruments. Upon completion, students should be able to safely perform the basic operations of measuring, layout, drilling, sawing, turning, and milling. MAC 114 Intro to Metrology (2credits) This course introduces the care and use of precision measuring instruments. Emphasis is placed on the inspection of machine parts and use of a wide variety of measuring instruments. Upon completion, students should be able to demonstrate the correct use of measuring instruments. MAC 122 CNC Turning (2credits) This course introduces the programming, setup, and operation of CNC turning centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC turning centers. MAC 124 CNC Milling (2credits) This course introduces the manual programming, setup, and operation of CNC machining centers. Topics include programming formats, control functions, program editing, part production, and inspection. Upon completion, students should be able to manufacture simple parts using CNC machining centers. Welding Fall 2015 WLD 112 M-F 8:15 11:15 AM WLD 115 M-F 8:15 11:15 AM Spring 2016 WLD 131 M-F 8:15 11:15 AM WLD 141 M-F 8:15 11:15 AM RCC/CCP 3-3-15 Page 12

WLD 112 Basic Welding Processes (2 credits) This course introduces basic welding and cutting. Emphasis is placed on beads applied with gases, mild steel fillers, and electrodes and the capillary action of solder. Upon completion, students should be able to set up welding and oxy-fuel equipment and perform welding, brazing, and soldering processes. WLD 115 SMAW (Stick) Plate (5 credits) This course introduces the shielded metal arc (stick) welding process. Emphasis is placed on padding, fillet, and groove welds in various positions with SMAW electrodes. WLD 131 GTAW (TIG) Plate (4 credits) This course introduces gas tungsten are (TIC) welding process. Topics include correct selection of tungsten, polarity, gas, and proper filler rod with emphasis on safety setup, and welding techniques. WLD 141 Symbols & Specifications (3credits) This course introduces the basic symbols and specifications used in welding. Emphasis is placed on interpretation of lines, notes, welding symbols and specifications. RCC/CCP 3-3-15 Page 13

PLACEMENT TESTS ACCEPTED BY RCC* College Readiness Benchmarks on Diagnostic Assessment Tests Test PLAN PSAT COMPASS (NCCCS Cut Score) NC DAP (NCCCS Cut Score) English 15 45 Writing = 70 Composite Score of 151 or higher Reading 18 47 Reading = 81 *** Mathematics 19 47 Pre-Algebra = 47 & Algebra = 66 7 on each assessment for DMA 010 thru 060 ***The reading and English part of the NC DAP is an integrated assessment of reading and English skills; meeting the composite cut score for placement into ENG 111 is one way to demonstrate college readiness in order to participate in the College Transfer Pathway. *ASSET Test: While the COMPASS test is the recognized assessment administered by RCC, ASSET scores are also accepted. Please contact RCC for more information about ASSET test cut scores. In addition to the diagnostic assessments, RCC can also use the following SAT and ACT scores as benchmarks for college readiness: SAT ACT English 500 English 18 Critical Reading 500 Critical Reading 22 Mathematics 500 Mathematics 22 To be eligible for enrollment in a College Transfer Pathway, students must demonstrate college readiness in English, Reading and Mathematics on one of the above tests. In addition, college readiness in all three subject areas may be demonstrated on a single assessment or by combining test scores from any of the approved assessments. Please see the following examples for more information: Example #1: A student who submits the following COMPASS test scores would be ELIGIBLE for the College Transfer Pathway: Writing = 70, Reading = 81, Pre-algebra = 47 AND Algebra = 66. Example #2: A student who submits the following PSAT scores would be ELIGIBLE for the College Transfer Pathway: English = 49, Reading = 50, Mathematics = 50 Example #3: A student who submits the following scores would be ELIGIBLE for the College Transfer Pathway by combining scores from multiple assessments: PSAT English = 49, COMPASS Reading = 81, PSAT Mathematics = 50 PLAN and PSAT scores recommended by ACT and College Board as indicators of college readiness. Assessments and Cut Scores for college readiness are determined by the North Carolina Community College System (NCCCS). RCC/CCP 3-3-15 Page 14

REGISTRATION STEPS Fall 2015 Enrollment Deadline: Priority: March 20, 2015 Final: June 1, 2015 Spring 2016 Enrollment Deadline: Priority: October 19, 2015 Final: December 1, 2015 Rockingham County School Students 1. Meet with the High School Counselor to determine eligibility and complete the Enrollment Form. 2. Submit the RCC online Application for Admissions at: www.rockingham.edu/pages/admissions.php If you have any problems or questions regarding application, call Enrollment Services at 342-4261, Ext. 2333. 3. Meet with the Director of Educational Partnerships for course selection. Meetings will be held at area high schools. The date and time and day will be determined by your High School Counselor and the Director of Educational Partnerships. 4. Obtain your RCC Schedule. Educational Partnerships will mail your schedule, along with a letter stating the deadline for payment and information about your college ID and parking sticker. Home/Private School Students 1. Meet with the Director of Educational Partnerships to determine eligibility, complete the Enrollment Form, obtain Test Authorization Form if necessary, and make course requests. Students must bring their High School Transcript and any applicable test scores to the meeting. Call 336 342-4261, Ext. 2130 or Ext. 2331 to schedule an appointment. 2. Submit the RCC online Application for Admissions at: www.rockingham.edu/pages/admissions.php If you have any problems or questions regarding the application, call Enrollment Services at 342-4261, Ext. 2333. 3. Obtain your RCC Schedule. Educational Partnerships will mail your schedule, along with a letter stating the deadline for payment and information about your college ID and parking sticker. Note: Please identify yourself as a potential Career and College Promise student when calling RCC. This will assure you obtain accurate information. RCC/CCP 3-3-15 Page 15

Students with Disabilities Rockingham Community College is committed to providing quality educational services to all qualified students in accordance with Section 504 of the Rehabilitation Act of 1973 subsection E and the Americans with Disabilities Act. A student with a disability that may affect his/her education should contact Melanie Eley in the RCC Counseling Office at 342-4261 x2308. It is the responsibility of the student to self-disclose the disability to the college; to provide appropriate, current documentation to the college; and to request accommodations in a timely manner. Important Information: Student Consent for Release of Records The Family Educational Rights and Privacy Act of 1974 (FERPA) limits the extent to which a student s educational information may be released without student consent. A student is protected by FERPA when the student turns 18 years of age or is enrolled in a post-secondary educational institution. FERPA will not allow RCC to release your academic information (to include end of semester grades, progress reports, etc) to your high school unless you give RCC written permission to do so. Your signature on the Student Consent for Release of Records form will give RCC permission to send your academic information to your high school. Program Practices High school students who successfully complete RCC courses will: 1. receive high school credit, depending upon the number of college semester hours a student successfully completes. Contact your high school counselor for more information. 2. receive college semester hour credit, as outlined by the three CCP pathways (see the Overview section of this booklet for more information). 3. have their RCC semester grades reported to their high school. High schools will be provided academic progress reports at mid-semester if the student is performing below average. Reporting grades and progress reports to high schools is done only for students who have submitted a signed Student Consent for Release of Records form to RCC. 4. have their high school, RCC grade, and attendance reports reviewed by the appropriate high school counselor. Important Information for Early Graduates High school seniors who graduate prior to the start of the College s spring semester will be ineligible for a CCP pathway; however, they will be eligible to take courses under a traditional non-high school program at RCC. Students enrolled in a traditional non-high school program are responsible for tuition, student fees, and books. RCC/CCP 3-3-15 Page 16

College Transfer Pathways at a Glance Career & College Promise College Transfer Pathway Leading to the Associate in Arts (P1012C) The CCP College Transfer Pathway Leading to the Associate in Arts is designed for high school juniors and seniors who wish to begin study toward the Associate in Arts degree and a baccalaureate degree in a non-stem major. GENERAL EDUCATION (31-32 SHC) The general education requirement includes study in courses selected from the Universal General Education Transfer Component (UGETC) component of the Comprehensive Articulation Agreement. English Composition (6 SHC) The following two English composition courses are required. ENG 111 Writing & Inquiry ENG 112 Writing/Research in the Disciplines Select three courses from the following from at least two different disciplines (9 SHC) Communication COM 231 Public Speaking Humanities/Fine Arts ART 111 Art Appreciation ART 114 Art History Survey I ART 115 Art History Survey II ENG 231 American Literature I ENG 232 American Literature II MUS 110 Music Appreciation PHI 215 Philosophical Issues PHI 240 Introduction to Ethics Social/Behavioral Sciences (9 SHC) Select three courses from the following from at least two different disciplines: ECO 251 Principles of Microeconomics ECO 252 Principles of Macroeconomics HIS 111 World Civilizations I HIS 112 World Civilizations II HIS 131 American History I HIS 132 American History II POL 120 American Government PSY 150 General Psychology SOC 210 Introduction to Sociology RCC/CCP 3-3-15 Page 17

Math (3-4 SHC) Select one course from the following: MAT 143 Quantitative Literacy MAT 152 Statistical Methods I (4 SHC) MAT 171 Precalculus Algebra (4 SHC) Natural Sciences (4 SHC) Select 4 SHC from the following course(s): BIO 110 Principles of Biology (4 SHC) BIO 111 General Biology I (4 SHC) CHM 151 General Chemistry I (4 SHC) PHY 110 Conceptual Physics and PHY 110A Conceptual Physics Lab (1 SHC) Academic Transition (1 SHC) The following course is required: ACA 122 College Transfer Success (1 SHC) *OPTIONAL GENERAL EDUCATION HOURS (0-8 SHC) A student may take up to 8 SHC of foreign language courses and accompanying labs, in a single language, designated as General Education for the CAA as a part of this pathway. These courses are not part of the Universal General Education Transfer Component. Students who complete these courses with a grade of C or better will receive transfer credit. The receiving university will determine whether the courses will count as general education, pre-major, or elective credit. Total Semester Hours Credit (SHC) in Pathway: 32-41* High school students in the CCP Transfer Pathway Leading to the Associate in Arts must complete the entire pathway before taking additional courses in the Associate in Arts degree. Effective Term Spring 2015 RCC/CCP 3-3-15 Page 18

Career & College Promise College Transfer Pathway Leading to the Associate in Science (P1042C) The CCP College Transfer Pathway Leading to the Associate in Science is designed for high school juniors and seniors who wish to begin study toward the Associate in Science degree and a baccalaureate degree in a STEM or technical major. GENERAL EDUCATION (34 SHC) The general education requirement includes study in courses selected from the Universal General Education Transfer Component (UGETC). English Composition (6 SHC) The following two English composition courses are required. ENG 111 Writing & Inquiry ENG 112 Writing/Research in the Disciplines Select two courses from the following from at least two different disciplines (6 SHC) Communications COM 231 Public Speaking Humanities/Fine Arts ART 111 Art Appreciation ART 114 Art History Survey I ART 115 Art History Survey II ENG 231 American Literature I ENG 232 American Literature II MUS 110 Music Appreciation PHI 215 Philosophical Issues PHI 240 Introduction to Ethics Social/Behavioral Sciences (6 SHC) Select two courses from the following from at least two different disciplines: ECO 251 Principles of Microeconomics ECO 252 Principles of Macroeconomics HIS 111 World Civilizations I HIS 112 World Civilizations II HIS 131 American History I HIS 132 American History II POL 120 American Government PSY 150 General Psychology SOC 210 Introduction to Sociology RCC/CCP 3-3-15 Page 19

Math (8 SHC) Select two courses from the following: MAT 171Precalculus Algebra MAT 172 Pre-calculus Trigonometry MAT 263 Brief Calculus MAT 271 Calculus I (4 SHC) (4 SHC) (4 SHC) (4 SHC) Natural Sciences (8 SHC) Select 8 SHC from the following course(s): BIO 110 Principles of Biology (4 SHC) BIO 111 General Biology I (4 SHC) and BIO 112 General Biology II (4 SHC) CHM 151 General Chemistry I (4 SHC) and CHM 152 General Chemistry II (4 SHC) PHY 110 Conceptual Physics and PHY 110A Conceptual Physics Lab (1 SHC) PHY 151 College Physics I (4 SHC) and PHY 152 College Physics II (4 SHC) PHY 251 General Physics I (4 SHC) and PHY 252 General Physics II (4 SHC) Total General Education Hours Required: 34 Academic Transition (1 SHC) The following course is required: ACA 122 College Transfer Success (1 SHC) *OPTIONAL GENERAL EDUCATION HOURS (0-8 SHC) A student may take up to 8 SHC of foreign language courses and accompanying labs, in a single language, designated as General Education for the CAA as a part of this pathway. These courses are not part of the Universal General Education Transfer Component. Students who complete these courses with a grade of C or better will receive transfer credit. The receiving university will determine whether the courses will count as general education, pre-major, or elective credit. Total Semester Hours Credit (SHC) in Pathway: 35-43* High school students in the CCP Transfer Pathway Leading to the Associate in Science must complete the entire pathway before taking additional courses in the Associate in Science degree. Effective Term Spring 2015 RCC/CCP 3-3-15 Page 20

Career Technical Pathways at a Glance Automation Systems (C35130AP) Core Courses Criminal Justice (C55180GP) Core Courses ELC 112 DC/AC Electricity (5) CJC 111 Introduction to Criminal Justice (3) ELC 117 Motor and Controls (4) CJC 112 Criminology (3) ELC 120 Intro to Wiring (3) CJC 113 Juvenile Justice (3) ELC 128 Introduction to PLC (3) CJC 131 Criminal Law (3) ISC 112 Industrial Specifications (2) Other Major Courses CJC 121 Law Enforcement Operations (3) CJC 141 Corrections (3) TOTAL SHC 17 TOTAL SHC 18 Early Childhood Education (C55220EP) Core Courses EDU 119 Early Childhood Ed (4) EDU 144 Child Development I (3) EDU 151 Creative Activities (3) EDU 146 Child Guidance (3) EDU 184 Early Child Intro Pract (2) Other Major Courses EDU 145 Child Development II (3) Welding (C50420WP) Core Courses WLD 112 Basic Welding Process (2) WLD 115 SMAW (stick) Plate (5) WLD 131 GTAW (TIG) Plate (4) WLD 141 Symbols & Specifications (3) TOTAL SHC 18 TOTAL SHC 14 Machining (C50210MP) Core Courses BPR 111 Blueprint Reading (2) ISC 112 Industrial Safety (2) MAC 111A Machining I (3) MAC 111B Machining I (3) MAC 114 Intro to Metrology (2) MAC 122 CNC Turning (2) MAC 124 CNC Milling (2) Cosmetology (C55140CP) Core Courses COS 111 Cosmetology Concepts I (4) COS 112 Salon I (8) COS 113 Cosmetology Concepts II (4) COS 114 Salon II (8) COS 115 Cosmetology Concepts III (4) COS 116 Salon III (4) COS 223 Contemporary Hair Coloring (2) TOTAL SHC 18 TOTAL SHC 34 Updated 3/2/15 RCC/CCP 3-3-15 Page 21

ROCKINGHAM COMMUNITY COLLEGE CAREER AND COLLEGE PROMISE (CCP) ENROLLMENT FORM (To be completed by Student and High School Guidance Counselor) Prospective Students Only Please Print: Name (Last) (First) (Middle) Address City State Zip Telephone: Home Cell Email: High School: Rising Junior Rising Senior Current Junior Current Senior I will graduate high school: Month Year Social Security Number Have you taken a course (s) at Rockingham Community College before? Yes No Career and College Promise Course Selection (To be Completed by HS Counselor) College Transfer Pathway (Must be a junior or senior, have a weighted GPA of 3.0 on high school courses; and demonstrate readiness on an assessment or placement test English, reading and mathematics) Area of Interest: Check one Only Associate in Arts (P1012C) Associate in Science (P1042C) Verify Eligibility: High school junior or senior Weighted GPA of 3.0 or higher on high school courses *Demonstrated college readiness on an assessment or placement test Provisional Enrollment Have a cumulative weighted GPA of 3.5 Have completed two years of high school English with a grade C or higher Have completed high school Algebra II (or higher level math class) with a grade C or higher Obtain the written approval of the high school principal or his/her designee Obtain written approval of the community college president or his/her designee May initially only enroll in college math and college English within the chosen pathway. Verify Completion of Enrollment Process: Completed an online Rockingham Community College application. Attached copies of an assessment with scores that demonstrate college readiness. Attached a copy of most recent OFFICIAL high school transcript. Career Technical Pathway (Must be a junior or senior; have a weighted GPA of 3.0 on high school courses or have the recommendation of the high school principal or his/her designee; and meet the prerequisites for the career pathway) Check One Only: Criminal Justice (C55180GP) Automation Systems (C35130AP) Welding (C50420WP) Early Childhood Education (C55220EP) Machining (C50210MP) Cosmetology (C55140CP) Verify Eligibility: High school junior or senior. Weighted GPA of 3.0 or higher on high school courses or have the recommendation of the high school principal or designee (attached). Verify Completion of Enrollment Process: Completed an online Rockingham Community College application.. Attached a copy of most recent OFFICIAL high school transcript. RCC/CCP 3-3-15 Page 22

College Readiness* Benchmarks on Approved Diagnostic Assessment Tests (ELGIBILITY MUST BE MET USING SCORES FOR ALL THREE REQUIRED COMPONENTS SAT English Placement Scores are required for most college level courses SAT SAT ACT ACT Critical Math English Reading Reading ACT Math Required Score Your Score 500 500 500 18 22 22 Placement Scores are required for most college level courses ***COMPASS English ***COMPASS Reading ***COMPASS Math Required Score 70 Writing 81 Reading 47 Pre-Algebra and 66 Algebra Your Score PLAN** English Placement Scores are required for most college level courses PLAN** PLAN** PSAT** PSAT** Reading Math English Reading PSAT** Math Required Score 15 18 19 45 47 47 Your Score Placement Scores are required for most college level courses NC DAP NC DAP English/Reading Math Required Score Your Score Composite score of 151 or higher 7 on each assessment for DMA 010 thru 060 *To be eligible for enrollment in a College Transfer Pathway, students must demonstrate college readiness in English, Reading and Mathematics on a single assessment or by combining test scores from any of the approved assessments. See Director of Educational Partnerships regarding requirements for advanced placement in Math. **PLAN and PSAT scores recommended by ACT and College Board as indicators of college readiness. ***COMPASS scores are based on NCCCS Cut Scores. RCC/CCP 3-3-15 Page 23

FRESHMAN/SOPHOMORE ENROLLMENT FORM ROCKINGHAM COMMUNITY COLLEGE CAREER AND COLLEGE PROMISE (CCP) ENROLLMENT FORM (To be completed by Student and High School Guidance Counselor) Prospective Freshman/Sophomore Students Only Please Print: Name (Last) (First) (Middle) Address City State Zip Telephone: Home Cell Email: High School: Rising Freshman Rising Sophomore Social Security Number Have you taken a course (s) at Rockingham Community College before? Yes No Career Technical Pathway Machining (C50210MP) Welding (C50420WP) To be completed by HS Counselor A qualified Freshman must: passed Math I with grade C or better scored 3 or 4 on EOC Math I obtained reading score of 16 on 8 th grade Explore Test meets prerequisites for Career Pathway recommendation of high school principal/designee completed online Rockingham Community College application A qualified Sophomore must: passed Math 1 with grade C or better scored 3 or 4 on EOC Math I obtained reading score of 16 on 8 th grade Explore Test have weighted GPA of 3.0 on high school courses meets prerequisites for Career Pathway recommendation of high school principal/designee completed online Rockingham Copies of transcript, test scores and all other required documentation must be submitted with this form. RCC/CCP 3-3-15 Page 24

STUDENT EXPECTATIONS AND PROGRAM PRACTICES Student Expectations: High School students enrolled in one of the Career and College Promise (CCP) Pathways at RCC are expected to: complete the Student Consent for Release of Records if they wish to have RCC grades sent to high school. attend classes on time, be well-prepared and abide by Rockingham Community College Code of Conduct. attend all scheduled classes following the college schedule even when the high school is closed or not in session. This includes high school teacher workdays, high school holidays and inclement weather closings. CCP students may withdraw from a class according to RCC policy. Students must meet with Director of Educational Partnerships before adjusting schedule. A withdrawal from the college course may prevent the student from graduating from high school. On days the student does not have a scheduled college class, the student does not have to report to RCC. Please refer to the RCC Academic Calendar for more information. pay any incurred fines (parking or library). Students will not receive a grade report, have a transcript sent or register for the next semester at RCC until all college fines have been paid. purchase course textbooks if the CCP Pathway requires it. New and used books are available from the RCC Bookstore located in the Student Center. pay $10 parking fee and technology fee at the start of each semester if required by the CCP Pathway. Technology fee structure: 1-3 credit hours $10; 4 or more credit hours $16 each semester. Parent Signature Date (If required by high school) Student Signature: Date I certify that this student has submitted the online Rockingham Community College Application for Admissions and has met the minimum requirements for participation in the Career and College Program at Rockingham Community College. High School Principal Signature Date High School Counselor Signature: Date Director Educational Partnerships Signature Date Rev. 4-18-14 RCC/CCP 3-3-15 Page 25

Career Technical Pathway Principal Recommendation Form Student Name: High School Complete this section if student is Junior or Senior: Classification: Rising Junior Rising Senior Career Technical Pathway (Please check one) Automation Systems Early Childhood Education Cosmetology Criminal Justice Machining Welding After considering this student s PLAN scores, academic performance and worth ethic, I am recommending him/her for enrollment in the Career Technical Pathway. Principal or Designee Signature (typed name) Signature: Date: Complete this section if student is Freshman or Sophomore Classification: Rising Freshman Rising Sophomore Career Technical Pathway (Please check one) Welding Machining Automation Systems After review of transcript and assessment of academic performance and maturity level of this student, I am recommending him/her for enrollment in the Career Technical Pathway. Principal or Designee Signature (typed name) Signature: Date: RCC/CCP 3-3-15 Page 26