Overview RIGOL PC Software Digital Oscilloscopes DS6000 series DS4000 series MSO4000 series DS2000 series DS1000Z series DS1000B series DS1000D/E series DS1000CA series (old) only RIGOL UltraSigma RIGOL Ultra Power Analyzer RIGOL Ultra Power Analyzer RIGOL Ultra Power Analyzer RIGOL UltraScope RIGOL UltraScope RIGOL UltraScope RIGOL UltraScope Spectrum Analyzers DSA1000 series DSA800 series RIGOL UltraSpectrum RIGOL UltraSpectrum RF Signal Generator DSG3000 series RIGOL Ultra IQ Station Function/Arbitrary Waveform Generators DG5000 series DG4000 series DG1000Z series DG1000 series RIGOL UltraStation RIGOL UltraStation RIGOL UltraStation RIGOL Ultra Wave Digital Multimeters DM3058 /E DM3068 RIGOL Ultra Sensor RIGOL Ultra View RIGOL Ultra Sensor RIGOL Technologies, Inc.
Data Acquisition/Switch Systems M300 series RIGOL Ultra Acquire Pro Programmable DC Power Supplies DP1000 series DP800 series RIGOL Ultra Power RIGOL Ultra Sigma The software application RIGOL UltraSigma is a basic software and running with all RIGOL products
Supports RIGOL DS4000, MSO4000 and DS2000 series Auto calibration if channel delay Power quality analysis Current harmonics analysis Inrush current analysis Safe operating area analysis Modulation analysis Output analysis Working modes Off Line and On Line RIGOL Ultra Power Analyzer is a software application of the RIGOL DS4000 series, MSO4000 series and DS2000 series Digital/Mixed Signal Oscilloscopes. It can be used to analyze the Switch-Mode Power Supply (SMPS). This application can be run on Windows XP, Windows Vista and Windows 7 operating systems. RIGOL TECHNOLOGIES, INC.
Main Features Power quality analysis The power quality characteristics of the power supply reflect the health condition of the power supply. As the switch-mode power supply adds a non-linear load to the mains supply, the voltage and current waveforms are different and the input current waveform would contain harmonics. This power quality measurement is required, to test the power consumption and distortion on the mains supply. RIGOL Ultra Power Analyzer provides common power quality measurement. Current harmonics analysis The input current waveform contains harmonics. Nowadays, most of the AC-DC power supply design should conform to the EN61000-3-2 current harmonic standard which specifies the limit of each order of harmonic for different class of device. Ultra Power Analyzer supports the pre-testing for all four classes of devices and supports the measurements of up to 40 orders of harmonics. Online/Offline Mode In the online mode, it is possible to store the data in a file and to create a test report in html format. In the offline mode waveform data can be imported. *.csv Output analysis The measurement results provide the peak-peak value, maximum, minimum as well as the frequency corresponding to the maximum amplitude in the spectrum analysis of the AC component of the output signal. Inrush current analysis When the switch-mode power supply is turned on, the filter capacitance at the input terminal is equivalent to a transient short circuit and will generate a current with short rise time. The inrush current function is used to analyze the power-on waveform of the switch-mode power supply. Modulation analysis The switch power supply usually uses feedback control loop to stabilize the output voltage. The modulation analysis is mainly used to analyze the characteristics of the control loop of the switch power supply. Power device analysis Switch loss is the most important and difficult test item of the switchmode power supply test, because the accuracy of the measurement result can only be ensured when the real switch point is recognized. Ultra Power Analyzer allows users to set the switch level and calculate the loss according to this level.
RIGOL Ultra Power PC Software for RIGOL DP1000 series Product Overview RIGOL Ultra Power supports RIGOL DP1000 series Programmable DC Power Supplies. This software tool is compatible with Windows XP, Windows Vista and Windows 7 operating systems Main Features With this PC Software the Programmable DC Power Supply of the DP1000 series can be controlled from the PC. It contains of a virtual panel of Power Supply s front panel. The channels can be switched on and off, values for current, voltage and resistance can be set. The current wave can be displayed. The Timer and Track function of the DP1000 series cannot be set with the software.
RIGOL Ultra View PC Software for RIGOL DM3058 and /E Digital Multimeter Product Overview RIGOL Ultra View supports RIGOL DM3058 Digital Multimeter. This software tool is compatible with Windows XP, Windows Vista and Windows 7 operating systems Main Features With this PC Software the Digital Multimeter DM3058 can be controlled from the PC. It contains of a virtual panel of Digital Multimeter s front panel, with all measurement and function buttons. Every setting that can be made on a DM3058 can be made with this software. It is possible to save settings and measurement data as a file.
Supports RIGOL DS1000D/E series, DS1000Z series and DS1000B series Application to control the Digital Oscilloscope and analyze and download the measured data Supports *.csv, *.txt, *.xls, *.ult, *.bmp, *.wmf and *.rcd files Download the waveform from the Digital Oscilloscope Download measured values into a table Open a Memory Wave to analyze it Open a recorded waveform Do Pass/Fail test to downloaded data Different window functions to display all or just selected data files RIGOL TECHNOLOGIES, INC. RIGOL Ultra Scope software is a tool for controlling a RIGOL DS1000D/E series, DS1000Z series or DS1000B series Digital Oscilloscope and to download measured data from the device. The current waveform could be downloaded to the software application to analyze the measured data with the help of different tools. It is also possible to just download the values into a table or to download measurement data and do a Pass/Fail test with various settings. The software can also open earlier recorded waveforms to do some analysis. To control the Digital Oscilloscope the settings can be downloaded from the device or uploaded to the device by the
software.. Product Overview Ultra Scope is a software tool which supports RIGOL DS1000D/E, DS1000Z and DS1000B series This software tool is compatible with Windows XP, Windows Vista and Windows 7 operating systems Ultra Scopes support *.xls, *.txt, *.ult, *.bmp, *.wmf, *.csv and *.rmt files. Main Features It is possible to control the Digital Oscilloscope from the PC by using either the DSO controller Menu, or by using the virtual panel of the Ultra Scope. After the settings have been made, they can be uploaded to the Digital Oscilloscope. If the settings on the device should be saved as a file they can be downloaded and saved as *.rmt files. To analyze the measured data, Data Sheets can be created Following files can be added to a Data Sheet to analyze the data from the Digital Oscilloscope: Data Measure Wave Record Memory Wave When using Data, up to 600 measurements can be loaded into one table with the columns Time [s] and Voltage [V]. If a Wave is downloaded from the Digital Oscilloscope it is possible to set cursors (x and y axis) and to save the data as *.bmp file. In the Measure function the data to measure can be downloaded from the device and saved as *.xls or *.txt files. For every measure type Pass/Fail test can be done. With the Record function a former waveform in kind of *.rcd files can be open for analysis and it can be saved as a *.bmp file. Memory Wave is a function to open saved *.wmf waveforms. Cursors can be set and the data can be exported to *.csv and *.bmp files
Supports RIGOL DM3000 series Create sensor projects Download projects into the Digital Multimeter Real time measurements Sensor data graphic display Supports *.csv, *.txt and *.bmp format Display reference curve Arbitrary Sensor RIGOL UltraSensor for DM3000 Series is the software along with DM3000 series Digital Multimeters which are capable of various sensor measurements. The software provides more powerful functions with easier to use. RIGOL TECHNOLOGIES, INC.
Product Overview Ultra Sensor is a software tool, that supports RIGOL DM3000 series Digital Multimeter This software tool is compatible with Windows 2000 and Windows XP, Windows Vista and Windows 7 operating systems. Ultra Sensor supports *.csv, *.txt, *.bmp files. Main Features Every project in RIGOL Ultra Sensor contains of three windows. The first window is the Edit Data window, in this window already existing data can be opened (as *.csv or *.txt files) and edited. But also completely new data can be entered. The second window is Reference Curve. A curve with the setting of Edit Data is shown. The reference curve can be exported as a *.bmp file. The last window is the Measure Curve. Here the real time measured waveform of the Digital Multimeter is displayed. The waveform can be replayed after it has been recorded and it can also be exported as a *.txt or*.csv file and so used as a future reference curve. Arbitrary Sensor establishes a relationship table between the inputs and the outputs as the basis of the edited characteristic curve of the sensor, coverts the measured inputs into corresponding physical quantities and then the output curve can be fitted by choosing Line or Least from the arithmetic options.
Supports RIGOL DSA1000 series and DSA800 series Control parameter configuration of the Spectrum Analyzer Operation and processing of the data acquired from the Spectrum Analyzer Supports *.csv, *.jpg, *.png, *.bmp files Various marker setting functions Powerful trace display and operation functions Peak and valley detection Various advanced measurement functions View history spectrum data Amplitude correction data editing SCPI Command List and Command Log RIGOL Ultra Spectrum is PC software for RIGOL DSA1000 series and DSA800 series, to control the parameter configuration of the Spectrum Analyzer. It can be used for operation and processing of the data acquired from the Spectrum Analyzer. RIGOL TECHNOLOGIES, INC.
Product Overview Ultra Spectrum is a software tool, that supports RIGOL DSA1000 and DSA800 series Spectrum Analyzer This software tool is compatible with Windows XP, Windows Vista and Windows 7 operating systems. There are 2 working modes, the Basic Mode and the Advanced Mode Ultra Spectrum supports *.csv, *.jpg, *.png, *.bmp files. Main Features Basic Mode In the Basic Mode it is possible to control the Spectrum Analyzer remotely. In addition various marker setting functions are available, like creating up to 20 markers and displaying the values of the markers in the marker table. The following trace display functions stand by: Line (no bar) Vertical Bar Horizontal Bar There are also seven basic and twelve user defined trace operation functions: Peak Valley Max Hold Min Hold Freeze Video Average Power Average Advanced Mode In this mode, the Peak and Valley Detect function is available, so the software will search for peaks and valleys automatically. The History Spectrum Data can be shown, and a 3D waterfall graph or intensity graph can be created. Various advanced measurement functions stand by: Time Power Channel Power Adjacent Channel Occupied and Emission BW C/N Ration Harmonic Distortion 3 rd Order Intermodulation Distortion Pass/Fail Test
Supports RIGOL DG5000, DG4000 and DG1000Z series Editing and creating waveforms to upload them to the Function/Arbitrary Waveform Generator Supports *.csv, *.txt, *.raf, *.wav files Insert 10 standard waveforms Create any waveform by using the Formula Editor * Draw the waveform Perform filtering function on selected waveform * Windowing function on the selected waveform * Execute simple math operations on the selected waveform Display power spectrum of current waveform Show Phase spectrum of current waveform RIGOL Ultra Station software is a tool for editing and creating desired waveforms and upload them to a RIGOL DG5000 series, DG4000 series or DG1000Z series Function/Arbitrary Waveform Generator. A waveform can be created by insert one of the 10 standard waveforms, entering the formula of the waveform to the Formula Editor* or by drawing it with the different drawing functions of Ultra Station. It can be selected on which channel of the DG the upload should be send and whether the device should directly perform an output on this channel. RIGOL TECHNOLOGIES, INC.
Product Overview Ultra Station is a software tool, which supports RIGOL DG5000, RIGOL 4000 and RIGOL DG1000Z series. This software tool is compatible with Windows XP, Windows Vista and Windows 7 operating systems. There are 2 Versions available of Ultra Station: General Application Version and Advanced Math Editing Version, last one has to be bought. Ultra Station supports *.csv, *.txt and *.raf files. As audio files *.wav are supported (8-Bit, 16-Bit, 24-Bit, 32-Bit single or dual channel). Main Features There are three different ways to create or edit a waveform in Ultra Station. First one of the standard waveforms can be selected. The standard waveforms are: Sine Square Ramp White Noise Sinc DC ExpRise ExpFall Sweep Multi Tones Another way to create a waveform is to draw it. There are three different functions to draw a waveform: Freehand Draw Point Draw Line Draw Features of the Advanced Version (liable to pay costs) Ultra Station allows performing filtering function on the selected waveform. The filtering functions are (only available in Advanced Math Editing Version): Lowpass Filter Bandpass Filter Bandstop Filter Highpass Filter Smoothing Filter The desired waveform can also be insert by using the Formula Editor. Any waveform that can be expressed by a formula can be displayed. With Ultra Station a windowing function can be performed on the selected Waveform (only available in Advanced Math Editing Version): Cosine Extension Cosine Rise Hamming Window * Function is just available in Ultra Station Advanced Math Editing Version