Armourdoor Fire Exit Steel Door AD10 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Fire Exit Steel Door AD10 Product Range Armourdoor Fire Exit Steel Door AD10 is constructed from 1.2mm zinc protected steel sheets joined together in a bonding process with a choice of infill e.g. honeycomb core, rock wool or solid timber dependant on insulation and security requirements. The Door is supported by a 1.6mm profiled zinc protected steel frame. Common Use Fire exit doors to be used by the general public too provide safe and effective escape through the doorway with minimal effort without prior knowledge of operation. General applications can be offices, shops, sports centres, schools and universities. Typical Uses Single openings from 690mm to 1350mm. Double openings from 1290mm to 2800mm. All at heights up to 2900mm Security Level Medium / High
Armourdoor Fire Exit Steel Door AD10 Product Overview Operation Manual Finish The Armourdoor AD10 fire exit steel door is available powder coated from a standard range of colours. Wood grain, PVC Laminate and Stainless steel are available. Specification of Build The fire exit door has a leaf thickness of 48mm. The core of the steel door is a honeycomb core as standard, with the option of solid timber or rock wool. Door Frame constructed from folded 1.6mm Zintec/aluzinc steel. The fire exit door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with dog bolt for hinge as standard. The Door is supplied with a standard 15mm rebated threshold; driveable thresholds available on request. Panic Hardware Fire Exit Doors are supplied with a Single or 2 Point Panic Bar or Push Pad as standard. A comprehensive range of hardware including rim locks, mortice locks, night latches and dead locks are available to meet site specific needs. Hardware is factory fitted to allow rapid site installation *note minimal site assembly may be required for double doors & hardware items such as door closers etc Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Security Steel Door AD20 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Security Steel Door AD20 Description The Armourdoor Security Steel Door AD20 is a high security constructed door, made from 1.5mm zinc protected steel sheets joined together in a bonding process with a solid timber core. The frame is manufactured from 1.6mm profiled zinc protected steel. The AD20 door is tested to BS 1627, Levels 2-5, offering attack resistance for up to 20min. (Secure by Design specification door sets available tested to PAS 24 or STS 202 ) Common Use The Armourdoor security door AD20 is for commercial and industrial premises such as factories, offices and retail units to resist attempted forced entry. Bespoke manufacturing of this door tailors to a site specific situation. The AD20 can be installed internally or externally. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm Security Level Level 2-5.
Armourdoor Security Steel Door AD20 Product Overview Operation Manual Finish The Armourdoor AD20 security door is available powder coated from a standard range of colours. Wood grain, PVC Laminate and Stainless steel are available. Specification of Build The AD 20 has a Steel Door Leaf thickness of 50mm and an infill composed of solid timber with integral steel stiffeners. Door Frame constructed from folded 1.6mm Zintec/aluzinc steel. The security door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with dog bolts as standard. The door is supplied with a standard 15mm rebated threshold and driveable thresholds available on request. The door blade is fitted with an anti jemmy astragal Security High Security triple point sash lock with high security cylinders and anti protected to reduce risk of key copying. Hag can supply an alternative high security multipoint panic hardware for fire escape situation. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Louvred Steel Door AD30 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Louvred Steel Door AD30 Description Armourdoor Louvred Steel Door AD30 is a high security door with louvered blades set 45 o to allow gases and airflow through the door. Common use The AD 30 is commonly installed in generator rooms, swimming pools, plant rooms and boiler rooms and other commercial areas that require specific ventilation. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm Security Level Medium Security For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Louvred Steel Door AD30 Product Overview Operation Manual Finish The Armourdoor AD30 louvered steel door is available powder coated from a standard range of colours. Specification of Build HAG louvred doors are made to order and can be offered either fully louvred as a steel equivalent to an aluminium louvred door or as a steel door with louvre panels inset to allow ventilation. The louvered door has a leaf thickness of 48mm. The Steel door blades made from 1.2mm corrosion resistant Zintec/Aluzinc as standard. The blades are set at 45o and mounted at 50mm x 50mm angle frame, which is supported by a box section sub-frame. The core of the steel door is a honeycomb core as standard, with the option of solid timber or rock wool. The louvered door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with 1 dog bolt per hinge as standard. The Door is supplied with a standard 15mm rebated threshold, driveable thresholds available on request. Optional Extras: Louvred over panels and side panels are available A galvanised bird and vermin mesh can be supplied Panic bolts / Latch Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Communal Entrance Doors AD40 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Communal Entrance Doors AD40 Description The Armourdoor Communal Entrance Doors AD40 is a high security door for entrances that experience high level use of pedestrian traffic. The steel door has double glazed units with two leaves each of 11.5mm anti- Bandit glass covered by 2mm stainless panels.safety is incorporated into the door with anti finger traps, concealed closers and frameless vision panels to minimise the threat of injury. Common Use Entrance door for offices, blocks of flats, housing association premises and retirement homes. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm Security Level Medium / High Security
Armourdoor Communal Entrance Doors AD40 Product Overview Operation Manual Finish The Armourdoor AD40 communal entrance door is available powder coated from a standard range of colours. Wood grain, PVC laminate and Stainless steel are available. Specification of Build The AD40 door has a leaf thickness of 48mm made from 1.5mm corrosion resistant steel as standard. The door infill is constructed from a solid timber core for anti-vandal protection. Steel door frame is manufactured from 1.6mm thick steel zintec sheets. The communal door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with 1 dog bolt per hinge as standard. The Door is supplied with a standard driveable threshold. Security Concealed double mortice mounted deadlock Optional Extras Access Control system with the inclusion of concealed maglocks Alternative Aperture shapes available. Panels can be solid, glazed or louvered. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Blast Steel Door AD50 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Blast Steel Door AD50 Product Range The Armourdoor Blast Door AD50 is a high security blast protection door; constructed from 1.5mm zinc protected steel sheets joined together in a bonding process with a solid timber core. The door frame is manufactured from 1.6mm profiled zinc protected steel. The Armourdoor blast door is tested to BS EN 13124-2 (EXR2 & EXR3) and have been tested to withstand up to a 12kg charge detonated 5.5m away from the door. Common Use The Armourdoor Blast door AD50 is for commercial and industrial applications to protect against explosions. Common installations are Plant and equipment rooms, Generator rooms, electrical sub stations, police stations and hospitals; the AD50 can be installed internally or externally.these doors are very specialised and we would recommend discussing your requirements with one of our specialists. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm. Security Level High For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Blast Steel Door AD50 Product Overview Operation Manual Finish The Armourdoor Blast Door AD50 is available powder coated from a standard range of colours. Wood grain, PVC Laminate and Stainless steel are available. Specification of Build The AD 50 has a Steel Door Leaf thickness of 50mm and an infill composed of solid timber with integral steel stiffeners. Door Frame constructed from folded 1.6mm Zintec/aluzinc steel. The blast door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with dog bolts as standard. The door is supplied with a standard 15mm rebated threshold and driveable thresholds available on request. The door blade are fitted with an anti jemmy astragal Security High Security triple point sash lock with high security cylinders and are protected to reduce risk of key copying. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Acoustic Door AD60 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Acoustic Door AD60 Description The Armourdoor Acoustic Door AD60 is a high security sound protecting door; constructed from 1.2mm zinc protected steel sheets joined together in a bonding process with a rock wool core. The door frame is manufactured from 1.6mm profiled zinc protected steel. The Armourdoor Acoustic door is tested to BS EN ISO 140-3:1995 and can provide acoustic reduction of 35 db, 45 db & 50 db. Common Use The Armourdoor Acoustic door AD50 is for commercial and industrial applications to protect against unwanted noise. This door is installed to protect employees or general public in areas that where there are high levels of noise and ear protection is not available e.g. public access. Common applications are Plant and equipment rooms, Generator rooms, electrical sub stations etc. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm Security Level Low / Medium Security For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Acoustic Door AD60 Product Overview Operation Manual Finish The Armourdoor Acoustic Door AD60 is available powder coated from a standard range of colours. Wood grain, PVC Laminate and Stainless steel are available. Specification of Build The AD 60 has a steel door leaf thickness of 56mm and a infill rock wool. Door Frame constructed from folded 1.6mm Zintec/aluzinc steel. The acoustic door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with 1 dog bolt hinge as standard. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Fireguard Steel Door FD01 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Fireguard Steel Door FD01 Description The Fireguard steel door FD01 provides protection against the spread of fire whilst securing property against theft. The FD01 is capable of 60, 120 and 240 minutes fire protection dependant on specification requirements. The door has been tested to BS476 part 20 & 22, BSEN1634 and holds certifire certificates. Common use The Fireguard FD01 is used to protect plant rooms, electrical sub stations, generator rooms, boiler rooms and areas where there is a risk of fire spreading to adjoining areas. Dimensions Single maximum openings of 1250mm. Double openings maximum of 2600mm. All at heights up to 2800mm. Security Level High
Fireguard Steel Door FD01 Product Overview Operation Manual Finish The Fireguard Steel door FD01 is available is a range of Powder Coat finishes, Wood grain or PVC Laminate. Specification of Build The fire protecting steel door leaf has a thickness of 48mm with an interior honeycomb core as standard with the option of rock wool. The door frame is manufactured from 1.6mm folded Zintec/aluzinc steel. The FD01 is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The frame is fitted with 3 class 13 stainless steel hinges with security dog bolts. Security Single doors have a modular mortice Lock Double door have an addition of a flush bolt to inactive leaf Optional Extras Side and over panels for connecting windows available Vision panels and louvre panels available and are subject to test constraints; these can be fitted with an anti-vermin/insect mesh. Full range of locking devices available please enquire. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Internal Steel Door AD70 Technical Specifications www.hag.co.uk Advice Line 0800 072 3444
Armourdoor Internal Steel Door AD70 Description Armourdoor Internal Steel Door AD70 is designed to replace the traditional internal timber doors on buildings and offer a range of designs, finishes and hardware specifications. Constructed from 1.0mm zinc protected steel sheets joined together in a bonding process with a choice of infill, e.g. honeycomb core, rock wool or solid timber dependant on insulation and security requirements. The Door is supported by a 1.6mm profiled zinc protected steel frame. Common Use Office, hospital, school, university, post office and banks; for use as an entry and exit door between rooms and areas etc. Dimensions Single openings from 690mm to 1390mm. Double openings from 1290mm to 2600mm. All at heights up to 2900mm Security Level Medium For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk
Armourdoor Internal Steel Door AD70 Product Overview Operation Manual Finish The Armourdoor Internal Steel Door AD70 is available powder coated from a standard range of colours. Wood Grain laminate Nordik Oak, Ash, Mahogany, Teak, Cherry, Virgin White, Golden Oak, Magic Oak. Specification of Build The Steel door has a leaf thickness of 48mm. The core of the steel door is honeycomb as standard, with the option of solid timber or rock wool. Door Frame constructed from folded 1.6mm Zintec/aluzinc steel. The internal steel door is supplied with a variable sub frame to allow up to 30mm tolerance for site installations. The Door is supplied with a standard driveable threshold. Product specification may change and it is advisable to consult with HAG technical advisors before specifying or ordering. HAG operates a policy of continuous improvement. For further information about this product please call the HAG advice line on 0800 072 3444 or email info@hag.co.uk