Breakstem Systems Since 1922 Since 1936 2010

Breakstem Systems Since 1922 Since 1936 2010

Intelligent Systems for versatile Fastening Joining components and diverse materials that vary in thickness and composition is a fundamental aspect of Avdel breakstem fastening systems. The fl exibility to meet a wide range of customer requirements ensures that an optimal fastening solution can be tailored to the needs of the application. Avdel breakstem fasteners are produced from high quality, durable materials manufactured using Avdel's cold forming process. Elements of the fastener design, cold forming process and additional operations produce each fasteners specifi c performance features and characteristics. Avdel's wide range of breakstem fasteners can be used to fasten a variety of materials including soft, brittle and thin metals and plastics. They are designed to meet the highest quality standards and built to resist the toughest environmental extremities. Avdel products have often been designed and developed in collaboration with our customers, thus you can be sure they ve been designed with function and practicality at the forefront of the development. With fastening technology nothing should be left to chance, from conceptual design to the fi nished article every decision is signifi cant and must be made with the end result in mind. This is inherent to the Avdel culture, we have highly skilled applications engineers on hand to support your fastening requirements and recommend the best solution for your joining needs. Avdel breakstem fasteners conform to the requirements of modern installation systems. They can be installed manually or automatically and can easily be integrated into existing installation processes. Avdel breakstem fastening solutions can be used to simplify production fl ows and reduce assembly time whilst simultaneously improving quality and performance in the application. Whether you specialise in high volume production or small volume batches we can recommend a fastening solution to match. Our customised Multi-head Assembly Stations can fasten any number of joints in a single operation whilst our hand tools provide fl exible assembly solutions in many environments. In every case see ourselves as not only a provider of fasteners, tools and machines but as a fastening solution partner with the ability to support our customers and help to improve their assembly performance. 2

Contents Page Systems Range Overview The Range of Avdel Breakstem Systems Installation Equipment Data Sheets Avdel Breakstem Systems Selecting a Breakstem Fastener Range Overview Selection Guide Non-structural Breakstem Fasteners Avex Stavex Avibulb & Avinox Bulbex Klamp-Tite (non-structural) T-Lok Avdelmate Structural Breakstem Fasteners Avibulb XT & Avinox XT Hemlok Monobolt Interlock Q Rivet Klamp-Tite (structural) Avbolt Other Breakstem Fasteners BD Series (non-structural) Avdel SR (non-structural) Earth Tab Rivet (non-structural) Avex Splined (non-structural) Installation Tools Assembly Workstations Customised Assembly Systems Non-structural Breakstem Fasteners Avex Stavex Avibulb Avinox Bulbex Klamp-Tite (non-structural) T-Lok Avdelmate Structural Breakstem Fasteners Avibulb XT Avinox XT Hemlok Monobolt Interlock Q Rivet Klamp-Tite (structural) Avbolt Other Breakstem Fasteners BD Series (non-structural) Avdel SR (non-structural) Earth Tab Rivet (non-structural) Avex Splined (non-structural) 4 5 6-7 8-9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 24 25 25 26-29 30-31 32-34 35-39 40-43 44 45 46-47 48 49 50-52 53 54 55-56 57-62 63-65 66-73 74 75-76 78-93 94-100 101 102 The Range of Avdel Blind Fastening Systems 103 3

Avdel Breakstem Systems Avdel breakstem fasteners and installation tools are a high performance blind fastening system. For 75 years the Avdel brand has been synonymous with world-leading, blind fastening systems. Used in all manufacturing industries throughout the world, there is an Avdel breakstem fastener and installation tool to suit virtually every assembly requirement. Key user benefits include: Benefits of assembly Extensive Product Choice The Avdel breakstem range is now more extensive than ever. A wide choice of headforms, finishes and sizes are available as standard and new products have been introduced to expand the steel and stainless steel product ranges. Installation Tools A comprehensive range of high performance tools ensure reliable and accurate installation of Avdel breakstem fasteners. Combining the latest design and engineering technology with robust and durable construction, the range includes hydro-pneumatic handtools, a battery powered tool as well as fully automated, customised equipment for high volume production. Multi-grip Capability Stavex, Avex, Monobolt and Klamp-Tite breakstem fasteners offer multi-grip capability. By accommodating many variations in material thickness, just one fastener can be used in several assembly applications, reducing stock holding, time and costs. Complete Hole Fill Monobolt, Stavex and Avex fasteners offer exceptional hole fill. Expanding to fill oversize, irregular, slotted or misaligned holes they create a high strength, vibration resistant joint. Consistent, High Performance Designed and manufactured to tight tolerances, Avdel breakstem fastening systems ensure consistently accurate and secure, high strength assembly. Retained and Locked Stems Most Avdel breakstem fasteners have a retained stem which provides strong, vibration resistant joints without electrical problems or rattling often caused by loose stems. For additional strength, Monobolt, Interlock and Klamp-Tite stems are mechanically locked into the shell head whilst the splined stems of Hemlok and Q Rivet fasteners form interference locks. Structural Assembly Where load-bearing, structural joints are required, Avibulb XT, Avinox XT, Hemlok, Q Rivet, Interlock and Monobolt breakstem fasteners have been designed to offer high shear and tensile strength. The Avbolt structural blind fastener offers strength values that are normallly only possible with non blind lockbolts. Customised Designs As you would expect from a leader in fastening solutions, we have extensive experience in engineering and developing breakstem fasteners and tooling to unique customer requirements and a few examples are detailed in this brochure. Please contact us to discuss your special requirements. Domestic appliances Car chassis Electronic components 4

Selecting a Breakstem Fastener Selecting an Avdel breakstem fastener is a simple process. The factors detailed below are designed to help you select a fastener suitable for your application: Fastener Selection Grip Range The fastener should be selected to ensure that the thickness of the parent material(s) falls within the grip range. Most Avdel breakstem fasteners offer multi-grip capability, with Monobolt, Stavex and Avex fasteners offering exceptional multi-grip performance. Hole Size This is specified on the relevant technical data sheet for the fastener. It is important to control the hole size accurately in order to ensure optimum fastener performance. Corrosion Resistance The selection of the material type and finish of the breakstem fastener should be made on the basis of the corrosion resistance required. Corrosion is best reduced by selecting a fastener material which is the same as the parent material(s). Stainless steel fasteners offer the best corrosion resistance. Special Surface Coatings For improved corrosion resistance we can apply many protective coatings, including: Delta-Seal, extra zinc plating, zinc-nickel plating and anodised finishes for aluminium alloy fasteners, Strength Characteristics Hemlok, Monobolt, Klamp- Tite (structural), Stavex, Avinox XT and Avibulb XT fasteners all offer high shear and tensile strength. Please refer to the technical data sheets for typical strength values. For heavy duty applications the Avbolt blind structural fastener is the first choice. Hole Fill Monobolt and Interlock fasteners provide excellent hole fill via a radially expanded body. Avex, Stavex, Avibulb and Avdel SR fasteners also provide good hole fill. Important Information The information on this page should be used in conjunction with the technical data sheets for the individual fasteners. All test and performance data detailed on the datasheets reflect the ultimate strength of the fasteners, determined with representative samples and over multiple tests. Avdel recommends that you use this data as a guide only, since other factors may affect the performance of the fastener. We strongly recommend you test the fastener in your application to determine exact performance levels. with or without dyeing. Where it is important to improve corrosion resistance and match the surrounding colour, clear, black, yellow, JS500, hex Load Spreading Most Avdel breakstem fasteners have a large blind side bearing area. chrome free and other passivations are available. Bulbex and Klamp-Tite fasteners provide exceptional load spreading capability and are ideal for use in thin sheet or low strength materials. 5

Range Overview - non-structural - Brand Material Key features Body Stem Avex Aluminium Alloy Aluminium Alloy Steel Stainless Steel Multi-grip capability Good hole fill Retained stem Large blind side bearing area Stavex Steel Stainless Steel Steel Stainless Steel Multi-grip capability Good hole fill Retained stem Large blind side bearing area Avibulb Steel Steel High shear and tensile strength Retained stem Large blind side bearing area Avinox Stainless Steel Stainless Steel High shear and tensile strength High corrosion resistance Retained stem Large blind side bearing area Bulbex Aluminium Alloy Aluminium Alloy Split tail formation for plastic and low strength materials Multi-grip capability Retained stem Klamp-Tite (non-structural) Aluminium Alloy Aluminium Alloy Split tail formation for thin sheet and low strength materials Multi-grip capability Good clamp up T-Lok Steel Steel Peel-type tail formation for joining wood to metal Wide grip range Retained stem Avdelmate Aluminium Alloy Aluminium Alloy Steel Aluminium Alloy Steel Steel Two piece fastener Extra wide grip range Large bearing area against both sides of the application Excellent hole fi ll Standard Breakstem Range BD Series Aluminium Alloy Aluminium Alloy Aluminium Alloy Copper Stainless Steel Stainless Steel Aluminium Alloy Steel Stainless Steel Steel Steel Stainless Steel Low cost standard rivet Wide range of materials and sizes Quick installation Increased stem retention Avdel SR Aluminium Alloy Aluminium Alloy Aluminium Alloy Copper Steel Stainless Steel Aluminium Alloy Steel Stainless Steel Steel Steel Stainless Steel Fully sealed fasteners Good hole fi ll Retained stem Wide range of materials and sizes Earth Tab Rivet Steel Steel Cost effective earthing point Paint piercing capability Twin tabs allow one or two connections Avex Splined Steel Steel Steel splines for electrical continuity in earthing applications Multi-grip capability 6

Range Overview - structural - Brand Material Key features Body Stem Avibulb XT Steel Steel High shear and tensile strength High residual clamp load Multi-grip capability Large blind side bearing area Avinox XT Stainless Steel Stainless Steel High shear and tensile strength High residual clamp load High corrosion resistance Multi-grip capability Large blind side bearing area Hemlok Aluminium Alloy Steel Aluminium Alloy Steel Very high shear and tensile strength Large blind side bearing area Interference lock via splined stem Monobolt Aluminium Alloy Steel Stainless Steel Aluminium Alloy Steel Stainless Steel Multi-grip capability Fully sealed fastener Visible lock Excellent hole fi ll Mechanically locked stem Good sheet take-up performance Interlock Aluminium Alloy Steel Aluminium Alloy Steel Multi-grip capability Fully sealed fastener Excellent hole fi ll Mechanically locked stem Good sheet take-up performance Q Rivet Aluminium Alloy Aluminium Alloy Steel Stainless Steel Aluminium Alloy Steel Steel Stainless Steel Interference lock via a splined stem Stem plugs entire shell length Weatherproof Klamp-Tite (structural) Aluminium Alloy Aluminium Alloy Split tail formation for thin sheet and low strength materials Multi-grip capability Good clamp up Mechanically locked stem Visible lock Avbolt Steel Steel Very high shear and tensile strength High residual clamp loads in joint Large head and blindside bearing areas 7

Selection Guide This table is designed as a guide to help you select the most suitable Avdel breakstem fastener for your particular application. Full technical and performance data for each breakstem fastener can be found on our website www.avdel-global.com or contact your local Avdel representative. Product Range Body Material Stem Headform Fastener Size (nom) Page No. Nonstructural Aluminium Steel Stainless Steel Copper Aluminium Steel Stainless Steel Dome/ Protruding Countersunk Large Flange 2.4 mm (3/32") 3.0 mm 3.2 mm (1/8") 4.0 mm (5/32") 4.3 mm 4.8 mm 5.0 mm 6.0 mm 6.4 mm (1/4") Series No. Description Data sheets 8 Avex 1604 10 35 1641 10 36 1643 10 37 1661 10 38 1663 10 39 BE34 11 40 BS01 11 41 Stavex BS04 11 42 BS11 11 43 Avibulb BN01 12 44 Avinox BE61 12 45 Bulbex BF01 13 46 BF41 13 47 Klamp-Tite (nonstructural) BAPK 14 48 T-Lok BM01 15 49 BALMS 16 50 Avdelmate BSLMS 16 51 SSLMS 16 52 BD01 24 78 BD02 24 80 BD03 24 82 BD05 24 84 Standard BD11 24 85 Breakstem BD13 24 87 Range BD21 24 88 BD Series BD23 24 90 BD24 24 91 BD31 24 92 BD41 24 93 SR01 24 94 SR02 24 95 SR03 24 96 Avdel SR SR04 24 97 SR21 24 98 SR31 24 99 SR41 24 100 Earth Tab Rivet BN11 25 101 Avex Splined 1610 25 102

Product Range Body Material Stem Headform Fastener Size (nom) Page No Structural Aluminium Steel Stainless Steel Aluminium Steel Stainless Steel Dome/ Protruding Counter sunk Large Flange 3.2 mm (1/8") 4.0 mm (5/32") 4.8 mm 6.4 mm (1/4") 8.0 mm (5/16") 10.0 mm (3/8") 12,7 mm (1/2") 16,0 mm (5/8") Series No. Description Data sheet Avibulb XT BN01 17 53 Avinox XT BE61 17 54 2221 18 55 Hemlok 2241 18 56 2711 19 57 2721 19 58 2761 19 59 2764 19 60 2771 19 61 2774 19 62 Monobolt BAPI 20 63 Interlock SSCI 20 64 SSPI 20 65 AACQ AALQ 21 66 AAPQ BSCQ BSLQ 21 68 BSPQ Q Rivet CCCQ CCLQ 21 70 CCPQ SSCQ SSLQ 21 72 SSPQ Klamp-Tite (structural) BAPKTR 22 74 Avbolt 21001 23 75 21021 23 76 Our policy is one of continuous product development and improvement and we reserve the right to change the specification of any product without prior notice. 9

Avex Multi-grip, aluminium alloy breakstem fasteners with a long and reliable track record in a wide range of applications and industries. Key features and benefi ts Multi-grip capability accommodates wide variations in material thickness One fastener can be used to replace several standard grip fasteners thus reduced fastener inventory and simpler stock control Good hole fi ll provides strong, vibration resistant joints Compensates for irregular, oversized, slotted or misaligned holes Can stop sheet movement in non-standard holes Retained stem avoids damage, electrical problems or rattling caused by loose stems Provides a large blind side bearing area against the rear sheet Spreads the tail bearing load/clamp load on the rear sheet making it ideal for use in thin sheet materials Specifi cations Sizes: 3.0 mm to 6.4 mm (1/4") Materials: Aluminium alloy with steel or stainless steel stems Headforms: Dome, countersunk and large fl ange Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Commercial vehicles Domestic appliances Electronics Electrical equipment General light industrial Heating and ventilation Garage doors Domestic heating systems Car chassis 10

Stavex Multi-grip, high strength steel and stainless steel breakstem fasteners. Key features and benefi ts High shear and tensile strength provides strong, vibration resistant joints Stainless steel option provides high corrosion resistance and is ideal for applications requiring elevated temperatures Multi-grip capability accommodates wide variations in material thickness One fastener can be used to replace several standard grip fasteners thus reduced fastener inventory and simpler stock control Good hole fi ll compensates for irregular, oversized, slotted or misaligned holes and can stop movement in non-standard holes Retained stem avoids damage, electrical problems or rattling caused by loose stems Provides a large blind side bearing area against the rear sheet Spreads the tail bearing load/clamp load on the rear sheet making it ideal for use in thin sheet materials Specifi cations Sizes: 3.2 mm to 6.4 mm (1/8" to 1/4") Materials: Steel or stainless steel Headforms: Dome, countersunk and large fl ange Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Commercial vehicles Domestic appliances Electronics Electrical equipment General light industrial Heating and ventilation Snowmobile Passenger air bag Roll-up security door 11

Avinox & Avibulb High strength stainless steel (Avinox ) and steel (Avibulb ) breakstem fasteners with excellent bulbing tail formation. Ideal for thin sheet materials. Avinox Key features and benefi ts Avibulb High shear and tensile strength providing strong, vibration resistant joints Stainless steel Avinox for high corrosion resistance and applications requiring elevated temperatures Provides a large blind side bearing area against the rear sheet Spreads the tail bearing load/clamp load on the rear sheet making it ideal for use in thin sheet materials Good hole fi ll compensates for irregular, oversized, slotted or misaligned holes Retained stem avoids damage, electrical problems or rattling caused by loose stems Specifi cations Sizes: 3.2 mm to 4.8 mm (1/8" to 3/16"), Avibulb up to 6.0 mm Material: Stainless steel and steel Headform: Dome Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Cabinets and enclosures Heating and ventilation Telecommunications General light industrial Telecommunications cabinets Electronic components Ladders 12

Bulbex Aluminium alloy breakstem fasteners with a split tail formation providing a very large blind side bearing area against the rear sheet. Ideal for use with plastic and low strength material. Key features and benefi ts Split tail formation provides a very large blind side bearing area against the rear sheet Spreads the tail bearing load/clamp load on the rear sheet providing high resistance to pull-out loads Multi-grip capability accommodates wide variations in material thickness Retained stem avoids damage, electrical problems or rattling caused by loose stems Specifi cations Sizes: 4.0 mm and 4.8 mm (5/32" and 3/16") Material: Aluminium alloy Headforms: Dome and large fl ange Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Caravans/RV Mobile homes Domestic appliances Plastic components Caravans/RV Mobile homes Speaker systems 13

Klamp-Tite non-structural Aluminium alloy fasteners with a very large blind side bearing area against the rear sheet. Ideal for use in thin sheet or low strength materials. Key features and benefi ts Split tail formation spreads the tail bearing load/clamp load on the rear sheet Ideal for use in thin sheet materials offering high resistance to pull-out loads Multi-grip capability accommodates wide variations in material thickness Retained stem provides very strong, vibration resistant joints avoiding problems caused by loose stems Specifi cations Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4") Materials: Aluminium alloy Headforms: Protruding Typical placing sequence 1. 2. 3. Please visit our website www.avdel-global.com for fastener placing animations and technical data. Assembly applications Automotive Caravans/RV Domestic appliances Plastic components 14

T-Lok Cost-effective and effi cient method of attaching metal to wood or other soft material without through holes. Key features and benefi ts Peel-type tail formation makes it ideal for joining metal to wood, board or low density plastic Large bearing surface expands into blind hole providing superior pull-out force Ideal replacement for wood screws or self-tapping screws Multi-grip capability accommodates wide variations in material thickness Specifi cations Sizes: 4.3 mm and 4.8 mm Materials: Steel Headforms: Dome Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Garage doors Furniture Garage doors Furnitures 15

Avdelmate A two-piece breakstem fastener consisting of a rivet and tubular section which provide a wide grip range, controlled clamp and a large bearing area on both sides of the application. Ideal for use in thin sheet, soft, brittle or low strength materials. Key features and benefi ts Extra-wide grip range from 15.8 mm to 98.4 mm (5/8" to 3-7/8") Large bearing area against both sides of the application spreads the tail bearing load/clamp load on the rear sheet to prevent damage Clamps tightly and securely without crushing parent material Excellent hole fi ll via radially expanded rivet body for a strong and vibration resistant joint Rivet stem retained in tubular component avoids loose stems Low profi le headform on both sides of the application for a neat appearance Specifi cations Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4") Materials: Aluminium alloy and steel Headforms: Dome Typical placing sequence 1. 2. 3. Please visit our website www.avdel-global.com for fastener placing animations and technical data. Assembly applications Toys for playgrounds Furniture Racks 16

Avibulb XT & Avinox XT Avibulb XT (steel) and Avinox XT (stainless steel) are high performance structural breakstem fasteners with excellent bulbing tail formation, ideal for thin sheet materials. The new fasteners feature a wide grip range, especially suited for applications with varying sheet thicknesses. Avibulb XT Avinox XT Key features and benefi ts High shear and tensile strength and high residual clamp load providing strong, vibration resistant joints Multi-grip capability accommodates wide variations in material thickness Spreads the tail bearing load/clamp load on the rear sheet making it ideal for use in thin sheet materials Suitable also in softer materials Retained stem avoids damage, electrical problems or rattling caused by loose stems Underhead recess accommodates burrs around holes and spreads the load evenly on the top sheet Stainless steel Avinox XT for high corrosion resistance and applications requiring elevated temperatures Specifi cations Sizes: 6.4 mm (1/4") Material: Steel and stainless steel Headform: Dome Typical placing sequence 1. 2. 3. Avdel Patent Protected Please visit our website www.avdel-global.com for fastener placing animations and technical data. Assembly applications Automotive Truck and trailer Cabinets and enclosures Heating and ventilation Telecommunications Domestic appliances Renewable energies Industrial equipment Telecommunications cabinets Industrial refrigeration Vehicle panels Solar panels Washing machine Heating and ventilation 17

Hemlok Structural breakstem fasteners with exceptional shear and tensile strength and a large blind side bearing area against the rear sheet. Key features and benefi ts All steel version provides exceptional shear and tensile strength Large blind side bearing area spreads the tail bearing load/ clamp load on the rear sheet reducing creep e.g. in plastic material Interference lock formed by a splined stem provides strong, vibration resistant joints No damage, electrical problems or rattling caused by loose stems Specifi cations Sizes: 6.4 mm (1/4") Materials: Aluminium alloy and steel Headform: Protruding Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Scaffold tower Step ladder Car seat base Warehouse racking Ladders Vehicle mud fl aps 18

Monobolt Multi-grip structural breakstem fasteners providing a fully sealed joint and visible lock. Key features and benefi ts Excellent hole fi ll via radially expanded body provides very strong, vibration resistant joints and compensates for irregular, oversized, slotted or misaligned holes Good sheet take-up performance for large gap closing capability Stem mechanically locked into body avoids damage, electrical problems or rattling caused by loose stems Multi-grip capability High shear and tensile strength Visible lock for quick and easy inspection Specifi cations Sizes: 4.8 mm, 6.4 mm and 10 mm (3/16", 1/4" and 3/8") Materials: Aluminium alloy, steel and stainless steel Headforms: Protruding and countersunk Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Cabinets and enclosures Commercial vehicles Domestic appliances Heating and ventilation Car chassis Column tail lifts Product cooler 19

Interlock Multi-grip structural breakstem fasteners providing a fully sealed joint. Key features and benefi ts Excellent hole fi ll via radially expanded body provides greater joint integrity, added water resistance and compensates for irregular, oversized, slotted or misaligned holes Can stop sheet movement in non-standard holes Good sheet take-up performance for large gap closing capability Stem mechanically locked into body avoids damage, electrical problems or rattling caused by loose stems Multi-grip capability accommodates wide variations in material thickness High shear and tensile strength requires fewer rivets per assembly Specifi cations Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4") Materials: Aluminium alloy and steel Headforms: Protruding and countersunk Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Cabinets and enclosures Commercial vehicles Domestic appliances Heating and ventilation Truck trailer Heat exchanger 20

Q Rivet Structural breakstem fasteners with an internal interference lock and a weatherproof feature. Key features and benefi ts Interference lock formed by a splined stem provides powerful locking strength and hole fi lling Weatherproof fastener because the splined stem plugs the entire length of the shell High shear and tensile strength All stainless steel option for high corrosion resistance and applications requiring elevated temperatures Specifi cations Sizes: 3.2 mm to 6.4 mm (1/8" to 1/4") Materials: Aluminium alloy, steel and stainless steel Headforms: Protruding, large fl ange and countersunk Typical placing sequence 1. 2. 3. Assembly applications Please visit our website www.avdel-global.com for fastener placing animations and technical data. Automotive Building industries Commercial vehicles Domestic appliances Heating and ventilation Car seat base Vehicle mud fl aps Step ladder 21

Klamp-Tite structural Aluminium alloy fasteners with a very large blind side bearing area against the rear sheet. Ideal for use in thin sheet or low strength materials. Key features and benefi ts Split tail formation spreads the tail bearing load/clamp load on the rear sheet Ideal for use in thin sheet materials offering high resistance to pull-out loads Multi-grip capability accommodates wide variations in material thickness Stem is mechanically locked into body providing very strong, vibration resistant joints Visible lock for quick and easy inspection Optional underhead washer provides a weather-proof seal Specifi cations Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4") Materials: Aluminium alloy Headforms: Protruding Typical placing sequence 1. 2. 3. Please visit our website www.avdel-global.com for fastener placing animations and technical data. Assembly applications Container Cladding Commercial vehicles 22

Avbolt Structural Blind Fastener The Avbolt structural fastener is a high strength, tamper resistant, blind steel fastener designed for use in heavy-duty structural applications. It offers a high tensile and shear strength normally only possible with non blind lockbolts and combines it with the installation speed of blind products. Avbolt 10, 12.7 and 16 mm (3/8", 1/2" and 5/8"): 3 piece design (sleeve, collar, stem) Avbolt 4.8, 6.4 and 8.0 mm (3/16", 1/4" and 5/16"): 2 piece design (sleeve with collar, stem) Key features and benefi ts Use on blind sided application High tensile and shear strength for heavy-duty applications Wide grip capability suits a variety of material thicknesses Locking feature creates a vibration resistant joint and prevents loose stems Ideal for areas with restricted access Fast installation High security tamper resistance Optimised heat treatment Simple tooling requires only minimum operator skill Specifi cations Sizes: 4.8 mm to 16.0 mm (3/16" to 5/8") Material: Steel Typical placing sequence (3 piece design) 1. 2. 3. Avdel Patent Protected Please visit our website www.avdel-global.com for fastener placing animations and technical data. Assembly applications Automotive Construction Container Renewable energies Railway Mining Security fencing 23

Other Breakstem BD Series Non-structural blind breakstem rivet designed for a wide range of applications. Available in a variety of materials and combinations. Cost effective standard rivet Installed quickly and easily Design of the stem head ensures positive retention after installation Sizes from ø 2.4 mm (3/32") to 6.4 mm (1/4") Protruding, large fl ange or countersunk headforms Materials of body/stem: aluminium/aluminium, aluminium/steel, aluminium/stainless steel, steel/steel, stainless steel/steel, stainless steel/stainless steel, monel/steel, copper/steel Avdel SR Fully sealed breakstem fasteners in a wide range of materials and sizes. Fully sealed fastener provides a weather-proof fastener Good hole fi ll and retained stem provide strong vibration resistant joints Sizes from ø 3.2 mm (1/8") to 6.4 mm (1/4") Dome head Materials of body/stem: aluminium/aluminium, aluminium/steel, aluminium/stainless steel, steel/steel, stainless steel/stainless steel, copper/steel Please visit our website www.avdel-global.com for technical data. 24

Other Breakstem Fasteners Earth Tab Rivet Cost effective earthing point for thin sheet metal, with paint piercing capability to ensure good electrical conductivity. Twin tabs allow one or two connections Fast installation of a one piece assembly Works on a single phase power supply of 240 volts or below Provides a resistance to or below 0.1 ohms Tested and approved to EN 60335-1 and BS 3456 Parts 201, clauses 27, 28, 31 For 5.2 mm holes and a material thickness of 1.0 1.5 mm Steel body and stem with brass tab Avex Splined Designed with steel splines for electrical continuity in earthing applications. Steel splines break through a coating thickness of up to 0.3 mm Multi-grip capability Good hole fi ll for a strong and vibration resistant joint Retained stem no damage, electrical problems or rattling caused by loose stems Sizes of ø 4.0 mm (5/32") and 4.8 mm Steel body and stem Please visit our website www.avdel-global.com for technical data. 25

Installation Tools Genesis ng Series Power Tool Range New high performance, lightweight hydro-pneumatic handtools for breakstem rivets. Vacuum air supply cut-off on trigger minimizes air consumption Quick release or fixed stem collector bottle optional for ng1, ng2 and ng2-s Fixed stem collector bottle for ng3 and ng4 Integrated cycle counter (except ng1 and ng2-s) Lightweight construction reduces operator fatigue Toughened plastic body and heavy duty rubber base make it a robust tool ng1, ng2 and ng2-s feature a quick release nose equipment reducing setting times Soft touch rubber grip on handle for comfortable operation ng2-s split version with lightweight placing head and remote intensifier Avdel Patent Protected Placing capability ng1: Up to 4.8 mm aluminium breakstem rivets and up to 4.0 mm (5/32") steel breakstem rivets ng2: Up to 4.8mm breakstem rivets ng2-s: Up to 4.8mm breakstem rivets ng3: Up to 6.4mm (1/4") breakstem rivets produced by Avdel, except Avibulb XT, Avinox XT and Hemlok structural fasteners ng4: Up to 6.4mm (1/4") breakstem rivets produced by Avdel, except Monobolt and Interlock structural rivets Please visit our website www.avdel-global.com for technical information. ng1 ng2 ng2-s ng3 ng4 26

Installation Tools Quick Release Nose Equipment Save time and money with this patented system Change a nose equipment cartridge on your Genesis tool on line in less than ten seconds. By simply turning the quick release nose casing and removing it from the nose case adaptor assembly, it is possible to slide the nose equipment cartridge off the T adaptor and replace it with another. All this can be done without taking your Genesis tool off line. The used equipment cartridge can then be cleaned and serviced off line and returned ready for the next change over. Ideal for continuous flow production lines or environments where nose equipment requires frequent cleaning. Available on all standard Genesis models, they will place the same range of breakstem fasteners as standard nose equipment. Nose Case Adaptor Assembly 'T' Adaptor Quick Release Nose Casing Spanner Flats Aligned (Locked Position) Nose Equipment Cartridge Swivel Heads Access a wider range of applications Instead of a standard nose assembly, a swivel head can be fitted to a Genesis base tool. This allows 360 rotation of the tool about the nose tip and allows access into many applications otherwise too restrictive. There are two types of swivel heads; straight swivel head with the nose tip slightly offset from the centre line of the tool head and the right angle swivel head with the nose tip on a perpendicular axis to the head of the tool. Available on the ng1, ng2, ng2-s and ng3 models. Will place Avex, Avinox and Bulbex fasteners. Straight Swivel Head Right Angle Swivel Head 360 rotation 360 rotation 27

Installation Tools Sensitive Trigger Increase safety and improve product quality This system replaces the standard pneumatic trigger with a preloaded mechanical trigger. It uses the force exerted by pushing the fastener into the application to trigger the installation. Available on all Genesis ng models. Key benefits are: Increased safety the system relies on the fastener being perpendicular to the application. It is impossible to place a fastener, unless it is safely in the application. Improved product quality through increased consistency of fastener placement Uses standard Genesis nose equipment parts Easily adjustable placement force for ease of use Avdel Patent Protected Options The Genesis range can be customised to meet your unique assembly requirements. Below are just a few examples of options we have developed for our customers. If you have a special requirement you would like to discuss, please contact your local Avdel representative. Suspension Kit In addition to these there are more options to customise the Genesis tools: Extended Nose Assemblies for applications where fasteners are placed in deep recessed areas. A Stem Extraction System can be fitted to eliminate the need to take the Genesis tool off line to empty the stem collector. Suspension Kit with remote stem collection for attachement to the Genesis models ng2, ng3 and ng4, enabling tools to be mounted for vertically downwards riveting in a fixed station environment. Bench/Stand Mounted Workstations with either handle or foot pedal triggers to free up both hands 28

Installation Tools 722 Model The hydro-pneumatic 722 tool is designed to place Avbolt fasteners ø 4.8 mm to 8.0 mm ( 3 /16" to 5 /16") as well as all sizes of Avdelok lockbolts up to ø 9.6 mm ( 3 /8"). Cast aluminium body designed for heavy duty use over long periods of time, even in the most demanding environments Quick and simple operation minimizes operator fatigue and reduces assembly time to a minimum 7287 Model Hydro-pneumatic split tool with a lightweight placing head able to place Monobolt fasteners up to ø 10 mm ( 3 /8"), Avbolt fasteners up to ø 8 mm ( 5 /16") as well as lockbolts up to ø 10 mm ( 3 /8"). Extended stroke and pull force Installation of large fasteners with single pull action for high placement speed Short cycle time can increase assembly capacity Lightweight placing head reduces operator fatigue Remote intensifier mounted on castors for flexible use in the assembly line 734 Model Avbolt fasteners ø 8 mm to 16 mm ( 5 /16" to 5 /8") can be placed securely in seconds with this range of installation tools. Avdelok lockbolts ø 9.6 mm ( 3 /8") and all Avdelok LD lockbolts from ø 12.7 mm to 28.6 mm ( 1 /2" to 1 1 /8") can also be installed. Robust and rugged installation tools designed for a long working life in extreme conditions Range of hydraulic power units deliver the extreme high pull pressure required for secure, long lasting assembly at high speed Easy-to-change nose equipment and range of hydraulic hoses in different lengths enable the tool to be adapted to suit local assembly requirements Mounted on castors for easy movability Available in voltages from 110V to 525V, diesel option customised to specification Switches to sleep mode to conserve energy 722 7287 734 29

Assembly Workstations Avimat Automated Assembly System The Avimat provides a modular, automated assembly system for breakstem fasteners, reducing assembly times and costs. The integral processing diagnostics ensure the assembly process is highly controlled for improved product quality. It places the entire range of breakstem and structural breakstem fasteners from 3.0 mm to 6.4 mm (except Avdelmate & Klamp-Tite fasteners). Modular design of placing head, blow feed unit and PLC control cabinet for quick and simple integration into assembly lines Will work as a stand alone unit Flexible electric, pneumatic and hydraulic connections between all main components for quick and simple interface with a wide range of assembly systems The compact, lightweight placing head is quick to reconfigure, can be mounted separately and used at any angle providing maximum production flexibility and minimum tool downtime Integral processing diagnostics at all stages with clear and simple PLC displays for high precision, highly reliable assembly Continuous fastener feed with an average cycle time of approximately 5 seconds makes it ideal for high volume production lines Avdel Patent Protected Blow Feed Unit Fasteners are transferred from the bowl feeder to the placing head via the blow feeder 30

Assembly Workstations Customised Assembly Systems From simple twin-headed modules to multi-headed, customised equipment, these systems can dramatically reduce assembly time and costs while improving consistency of placing. These systems can be designed for virtually any application or assembly environment and process monitoring equipment or clamping modules can be easily integrated. The direction, type and number of assembly heads can all be customised. We have designed equipment with two heads to over eighty heads but the configurations are virtually limitless. High speed assembly Assembly of any configuration Fastening at any angle Synchronous fastener placement Highly controlled assembly Process flexibility Integration into assembly lines Improved product quality Assembly of any Configuration Fastening at any Angle 31

Customised Assembly Systems Assembly Systems Synchronous Fastener Placement A range of equipment has been designed for multiple and synchronous placement of fasteners. From simple twin-headed modules to multi-headed, customised equipment, these modular systems can dramatically reduce assembly time and cost. Precision Fastening Together with the fasteners, these high precision tools create a high quality, reliable assembly system. The fasteners are placed accurately and consistently without the risk of over-torquing. An additional benefit of these systems are the practical jig points provided by the assembly heads. 29 head machine The assembly heads provide practice jig points Integration into an assembly line 6-head Avimat 32

Customised Assembly Systems Assembly Applications Laundry Dryer This unit places 12 x 4.0mm Avex fasteners in one assembly cycle of 20 seconds. It replaced the use of individual screws with an assembly cycle of 60 seconds and has improved product quality by consistent placement of 12 fasteners at a time. It incorporates a blow feed unit to transfer the fasteners to the placing head, the work area is height adjustable and the unit is modular for ease of extending or upgrading. 33

Customised Assembly Systems Assembly Applications Station Wagon (restraining nets and sliding luggage cover) This unit places 8 x 4.8mm Avibulb and 4 x 4.8mm Avex (6 fasteners per module) in one assembly cycle of 20 seconds. It replaced the use of handtools with an assembly cycle of 60 seconds and has improved product quality by consistent placement of 12 fasteners at a time. Processing diagnostics are provided by sensors at all stages of the assembly cycle to ensure all the relevant components are present, the correct fasteners are in the placing heads and that the fasteners are correctly installed. 34

Avex 1604 120 Countersunk head 120 Tête fraisée 120 Senkkopf 120 Testa svasata 120 Cabeza avellanada Body: Aluminium alloy* (2.5 % Mg) Stem: Low carbon steel** Corps: Alliage d aluminium* (2.5% Mg) Brut Tige: Acier bas carbone** Hülse: Aluminium* (2.5 % Mg) Blank Dorn: Stahl** Zinc coated Revêtement zingué Verzinkt *: AA 5052, DIN 1725, AlMg2.5, Werkstoff 3.3523 **: BS3111 Type 0, SAE 1015/1018/1022, DIN 1654, Cq15/Cq22 Corpo: Lega di alluminio* (2.5% Mg) Nessuna finitura Gambo: Acciaio a basso tenore di carbonio** Zincato Cuerpo: Aluminio* (2.5% Mg) Vástago: Acero bajo en carbono** Zincado D E B 120 M ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn 1) kn 1) 3.2 (1/8") 4.0 (5/32") 4.8 2.4 6.3 12.2 0.9 01604-00412 4.0 7.9 3.3 3.4 13.4 5.5 1.3 1.8 0.7 01604-00414 1.0 5.5 9.5 14.8 01604-00416 2.8 7.9 14.3 01604-00514 4.1 4.2 6.5 1.4 2.2 1.1 1.3 3.6 8.8 15.1 01604-00515 3.2 7.9 15.5 1.5 01604-00615 4.9 5.0 9.0 1.8 2.9 2.3 6.3 12.7 20.4 1.3 01604-00621 all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) typical values / valeurs moyennes / typische Werte / Valori tipici / resistencias máximas recomendadas 35

Avex 1641 Large Flange Tête large Flachrundkopf extragroß Testa larga Cabeza ancha Body: Aluminium alloy* (2.5 % Mg) Stem: Low carbon steel** Corps: Alliage d aluminium* (2.5% Mg) Brut Tige: Acier bas carbone** Hülse: Aluminium* (2.5 % Mg) Blank Dorn: Stahl** Zinc coated Revêtement zingué Verzinkt *: AA 5052, DIN 1725, AlMg2.5, Werkstoff 3.3523 **: BS3111 Type 0, SAE 1015/1018/1022, DIN 1654, Cq15/Cq22 Corpo: Lega di alluminio* (2.5% Mg) Nessuna finitura Gambo: Acciaio a basso tenore di carbonio** Zincato Cuerpo: Aluminio* (2.5% Mg) Vástago: Acero bajo en carbono** Zincado B D E M ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn 1) kn 1) 4.8 1.6 6.3 13.9 4.8 11.1 4.9 5.0 18.7 16.2 2.2 2.9 1.3 2.1 01641-00619 1.5 01641-00613 3.2 9.3 17.0 1.3 01641-00617 6.4 12.7 20.2 1.3 01641-00621 12.7 19.8 28.2 1.4 01641-00631 all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) typical values / valeurs moyennes / typische Werte / Valori tipici / resistencias máximas recomendadas 36

Avex 1643 Large Flange Tête large Flachrundkopf extragroß Testa larga Cabeza ancha Body: Aluminium alloy* (2.5 % Mg) Stem: Stainless steel** Corps: Alliage d aluminium* (2.5% Mg) Brut Tige: Inox** Brut *: AA 5052, DIN 1725, AlMg2.5, Werkstoff 3.3523 **: BS3111, 321S31, AISI 321, Werkstoff 1.4541 Hülse: Aluminium* (2.5 % Mg) Blank Dorn: Edelstahl** Blank Corpo: Lega di alluminio* (2.5% Mg) Nessuna finitura Gambo: Acciaio inox** Nessuna finitura Cuerpo: Aluminio* (2.5% Mg) Vástago: Acero inoxidable** B D E M ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn 1) kn 1) 4.8 1.6 6.3 13.6 6.4 12.7 4.9 5.0 19.7 16.2 2.2 2.9 1.2 2.0 01643-00621 1.4 01643-00613 12.7 19.8 27.6 1.3 01643-00631 all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) typical values / valeurs moyennes / typische Werte / Valori tipici / resistencias máximas recomendadas 37

Avex 1661 Dome head Tête plate Flachrundkopf Testa tonda Cabeza alomada Body: Aluminium alloy* (2.5 % Mg) Stem: Low carbon steel** Corps: Alliage d aluminium* (2.5% Mg) Brut Tige: Acier bas carbone** Hülse: Aluminium* (2.5 % Mg) Blank Dorn: Stahl** Zinc coated Revêtement zingué Verzinkt *: AA 5052, DIN 1725, AlMg2.5, Werkstoff 3.3523 **: BS3111 Type 0, SAE 1015/1018/1022, DIN 1654, Cq15/Cq22 Corpo: Lega di alluminio* (2.5% Mg) Nessuna finitura Gambo: Acciaio a basso tenore di carbonio** Zincato Cuerpo: Aluminio* (2.5% Mg) Vástago: Acero bajo en carbono** Zincado ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn 1) kn 1) 3.0 0.8 4.3 3.1 3.3 9.1 6.7 1.3 1.7 0.7 0.9 01661-05307 3.2 (1/8") 4.0 (5/32") 4.8 6.4 (1/4") 0.8 4.8 10.4 01661-00410 1.2 6.3 12.0 01661-00412 3.3 3.4 6.7 1.3 1.8 0.7 1.0 4.0 7.9 13.6 01661-00414 5.5 9.5 16.0 01661-00416 0.5 3.2 9.3 1.2 6.3 4.1 4.2 12.5 8.2 1.6 2.2 1.0 1.6 01661-00512 1.1 01661-00508 0.8 4.7 10.7 1.1 01661-00510 4.0 9.5 16.2 1.0 01661-00516 6.4 12.7 19.6 1.0 01661-00521 1.6 6.3 13.9 4.8 11.1 18.7 1.3 01661-00619 4.9 5.0 10.1 1.8 2.9 2.3 4.8 12.7 20.2 1.3 01661-00621 1.5 01661-00613 12.7 19.8 28.2 1.4 01661-00631 1.5 8.3 6.6 6.9 16.8 13.5 2.7 4.0 3.1 2.5 01610-04506 2) all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) typical values / valeurs moyennes / typische Werte / Valori tipici / resistencias máximas recomendadas 2) stem: zinc plated, clear trivalent passivated / tige:revêtement zingué, passivation claire trivalente / Dorn: verzinkt, klar chromatiert Cr6-frei/ gambo: zincato, passivazione chiara trivalente / vástago: zincado, pasivado claro trivalente 38

Avex 1663 Dome head Tête plate Flachrundkopf Testa tonda Cabeza alomada Body: Aluminium alloy* (2.5 % Mg) Stem: Stainless steel** Corps: Alliage d aluminium* (2.5% Mg) Brut Tige: Inox** Brut *: AA 5052, DIN 1725, AlMg2.5, Werkstoff 3.3523 **: BS3111, 321S31, AISI 321, Werkstoff 1.4541 Hülse: Aluminium* (2.5 % Mg) Blank Dorn: Edelstahl** Blank Corpo: Lega di alluminio* (2.5% Mg) Nessuna finitura Gambo: Acciaio inox** Nessuna finitura Cuerpo: Aluminio* (2.5% Mg) Vástago: Acero inoxidable** ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn 1) kn 1) 3.0 0.8 4.3 3.1 3.3 9.1 6.7 1.3 1.7 0.7 0.9 01663-05307 3.2 (1/8") 4.0 (5/32") 4.8 0.8 4.8 10.4 01663-00410 1.2 6.3 12.0 01663-00412 3.3 3.4 6.7 1.3 1.8 0.7 1.0 4.0 7.9 13.6 01663-00414 5.5 9.5 16.0 01663-00416 0.5 3.2 9.3 1.2 6.3 4.1 4.2 12.5 8.2 1.6 2.2 1.0 1.6 01663-00512 1.1 01663-00508 0.8 4.7 10.7 1.1 01663-00510 4.0 9.5 16.2 1.0 01663-00516 6.4 12.7 19.6 1.0 01663-00521 1.6 6.3 13.9 4.8 11.1 18.7 1.3 01663-00619 4.9 5.0 10.1 1.8 2.9 2.3 4.8 12.7 20.2 1.3 01663-00621 1.5 01663-00613 12.7 19.8 28.2 1.4 01663-00631 all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) typical values / valeurs moyennes / typische Werte / Valori tipici / resistencias máximas recomendadas 39

Stavex BE34 Large Flange Tête large Flachrundkopf extragroß Testa larga Cabeza ancha Body: Low carbon steel* Corps: Acier bas carbone* Hülse: Stahl* Corpo: Acciaio a basso tenore di carbonio* Zincato Zinc plated Stem: Low carbon steel** Zinc plated Revêtement zingué Tige: Acier bas carbone** Revêtement zingué Verzinkt Dorn: Stahl** Verzinkt Gambo: Acciaio a basso tenore di carbonio** Zincato *: BS3111 Type 0, SAE 1008, DIN 1654, QSt 34-3 **: BS3111 Type 0, SAE 1010/1015/1018/1022, DIN 17210, Cq10 / DIN 1654 Cq10/Cq15/Cq22 Cuerpo: Acero bajo en carbono* Zincado Vástago: Acero bajo en carbono** Zincado ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn min. kn min. 4.8 mm 1.50 6.35 13.8 0BE34-00614 1.50 9.00 4.9 5.0 17.1 16.2 2.1 3.0 2.6 2.9 0BE34-00618 6.30 12.70 20.1 0BE34-00622 all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milimetros 40

Stavex BS01 Dome head Tête plate Flachrundkopf Testa tonda Cabeza alomada Body: Low carbon steel* Corps: Acier bas carbone* Hülse: Stahl* Corpo: Acciaio a basso Cuerpo: Acero bajo en tenore di carbonio* carbono* Zincato Zincado Zinc plated Stem: Low carbon steel** Zinc plated Revêtement zingué Tige: Acier bas carbone** Revêtement zingué Verzinkt Dorn: Stahl** Verzinkt Gambo: Acciaio a basso tenore di carbonio** Zincato *: BS3111 Type 0, SAE 1008, DIN 1654, QSt 34-3 **: BS3111 Type 0, SAE 1010/1015/1018/1022, DIN 17210, Cq10 / DIN 1654 Cq10/Cq15/Cq22 Vástago: Acero bajo en carbono** Zincado E B D M ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn min. kn min. 3.2 (1/8") 4.0 (5/32") 4.8 6.4 (1/4") 1.0 6.0 3.3 3.4 14.5 7.3 1.0 2.2 0.9 1.2 0BS01-00414 2.0 8.0 4.1 4.2 16.0 8.2 1.4 2.9 1.5 1.8 0BS01-00516 1.5 5.1 12.2 0BS01-00612 1.5 6.3 13.8 0BS01-00614 4.9 5.0 10.1 1.6 3.1 2.6 2.9 1.5 9.0 17.1 0BS01-00618 6.3 12.7 20.1 0BS01-00622 1.5 7.6 6.6 6.9 16.8 13.5 2.7 4.0 3.1 3.6 01610-04844 1) all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 1) stem: zinc plated, clear trivalent passivated / tige:revêtement zingué, passivation claire trivalente / Dorn: verzinkt, klar chromatiert Cr6-frei/ gambo: zincato, passivazione chiara trivalente / vástago: zincado, pasivado claro trivalente 41

Stavex BS04 120 Countersunk head 120 Tête fraisée 120 Senkkopf 120 Testa svasata 120 Cabeza avellanada Body: Low carbon steel* Corps: Acier bas carbone* Hülse: Stahl* Corpo: Acciaio a basso Cuerpo: Acero bajo en tenore di carbonio* carbono* Zincato Zincado Zinc plated Stem: Low carbon steel** Zinc plated Revêtement zingué Tige: Acier bas carbone** Revêtement zingué Verzinkt Dorn: Stahl** Verzinkt Gambo: Acciaio a basso tenore di carbonio** Zincato *: BS3111 Type 0, SAE 1008, DIN 1654, QSt 34-3 **: BS3111 Type 0, SAE 1010/1015/1018/1022, DIN 17210, Cq10 / DIN 1654 Cq10/Cq15/Cq22 Vástago: Acero bajo en carbono** Zincado D E B 120 M ø M B D E Part No/ref nom. min. max. min. max. max. max. max. max. kn min. kn min. 3.2 (1/8") 4.8 1.00 6.00 3.3 3.4 14.0 6.0 1.0 2.2 0.90 1.17 0BS04-00414 2.36 6.35 13.7 0BS04-00614 4.19 6.35 13.7 0BS04-C0614 4.9 5.0 8.9 1.4 3.0 2.00 2.89 2.36 9.52 17.0 0BS04-00618 6.35 12.70 20.1 0BS04-00622 all dimensions in mm / en millimètre / alle Maße in mm / in millimetri / en milimetros 42