Sirius Corp GPRS Data Logger [built in GPS] GS902 GPS Data & Measurement Logging 2 x Analog Channels + 1 x Pulse Channel + 4 x Digital Channels + 2 x Relay Outputs Upload Data & GPS information via GPRS and SMS on schedule or alarm triggered Programmable data logging and upload interval Temperature Sensor channel [GS902S] Alert user when temperature is high/low Overview Both I/O Data & GPS data tracking via GPRS / SMS Data logging in internal memory GPRS Real Time Data & Historical Data Upload Real Time Alert on GPS Features Real Time Alert on triggered alarm input and analog levels Panic Button triggered GPS data report via GPRS & SMS Integrated 16 bit MCU & Quad band GSM/GPRS Module
~ Data Logging Function Data Logger Features 2 High Precision A/D Channels 4 DI [Digital Input] or 1 DP [Digital Pulse] Channels 2 DO [Digital Output] Channels Optional 1 Temperature Sensor [ 50 ~ 125 C], programmable high/low alert temperature level Programmable data capturing type, range, start point, alert high/low and pulse level Device configuration setup by PC software via USB port Device parameters checked via SMS or PC software Programmable Data Upload Interval (5 seconds ~ 24 hours) Programmable Data Logging Interval (1 min ~ 60 min) Remote Configuration by SMS or GPRS USB Port for PC communication Support Dynamic Domain Name or Fixed IP Support TCP protocol data transmission 1MB Non volatile Memory maintaining max. 30 days period of data Channel Specification Analog Input: 4 ~ 20mA Pulse Input: Accumulated 99999999 pulses Input Impedance: 250Ω [current type input] 5~15VDC input Accuracy: 12bit AD Converter Pulse Frequency Measure > 20ms 2.5/ 4096=0.00061 (0.061%) Max. 50 pulses per second Digital On/Off Input : Optic coupler dry contact Triggered Level > 20ms Digital Output: max. DC24V @3A, AC120V @3A
~ GPS Function GPS Overview High precision in location (within 3 meters) and speed (meter per minute) Logging interval and Upload interval are independent and user programmable Support international standard NMEA interfacing with other GPS Navigation or Tracking System Support Google Earth Server/Client Application Software allows global application with regional services Alarm Detection 1. Over speed alert Automatically send alerts when driving speed exceeds user defined speed 2. Position Lock Automatically send alerts when the vehicle is moved apart from its parking position 3. Fencing In (min. 0.18m), multiple points Alert (SMS/Dial/GPRS) when moving into security zone 4. Fencing Out (min. 0.18m), multiple points Alert (SMS/Dial/GPRS) when moving out of security zone 5. Panic Button Emergency report with position information for both personal and vehicle alarm 6. Idle time monitoring An early warning security feature when vehicle is idle longer than predefined period 7. Alarm Dry Contact External alarm detecting devices e.g. shock detector, triggered air bag 8. Analog Input High or Low Alarm, & Pulse Input External sensor devices e.g. temperature transducer alerts user with GPS data Sample Application Tracking: It keeps users (max. 4 mobile phone & 1 centre) notified of GPS data via both GSM SMS and GPRS network in an userdefined interval Automatic Alarm Report: Not only alarm is reported by dialing, control centre is informed of the accident location via both GSM SMS and GPRS network instantly. Position Lock: User activates the Position Lock on leaving the car in the car park. When the car is moved out of its position, it will alert user and send the GPS data via both GSM SMS and GPRS network instantly.
~ data upload How to get the live and logged data? Internet: Using PC to receive GPS data via Internet GSM SMS: Using mobile phone or GSM modem to receive GPS data via SMS USB port: Using devices with USB port to retrieve GPS data via USB cable What information is inside the data packet? Device ID number Date Time stamp Power Voltage Level GPS data Speed, Location, Heading Degree GPS alarm status Digital Alarm Status Measured Analog values Measured Accumulated Pulse value When will GS902 upload data? (a) (b) On Schedule Data is uploaded every interval via SMS or GPRS User Programmable upload interval Data records within the interval will be uploaded in packet Manual Check Query by user mobile phone SMS Command from Server via SMS or GPRS Command via USB by PC software (c) Alarm Triggered Digital Alarm Input Panic Button Low Input Voltage Level Alert Analog Input Alert High/Low e.g. Temperature is too high/low Oil tank level is too low (c) GPS Alarm Fence In, Fence Out Position Lock Idle Time Over Speed Applications Fire Vehicles Central Management Tracking fire vehicle water tank level Tracking fire vehicle position Alert on low water tank level Fleet Management of Cold Food Truck Tracking temperature levels Tracking truck position Alert on high/low temperature
~ specification Specification Operating Temp: 30 C ~ +70 C Standby Temp: 50 C ~ +80 C Power Input: DC 9 ~ 24V (recommended DC12V) Rating: 55mA @12VDC, max. 0.2W Enclosure: Aluminum Case Dimension: 100 x 60 x 18 mm Weight: 92 g Optional Recharge Time: 2 hours Full Charge Battery Backup: 15~20 hours GPRS & GSM GPS Chip: GSTAR GS 89 GPS Band: 1575.42 MHz GPRS/GSM Chip: Quad Band GPS Standard: +NMEA protocol GPS Antenna: External GPS Accuracy: 3~5 meters Response Time: max. < 120s, the least < 20s Start Up Time: Power Up: 20~45s Standby Mode Wakeup: 15~25s Normal Mode Resume: 5~8s GSM/GPRS Module GS902B, GS902S, GS902P Siemens MC55i 850/900/1800/1900 MHz [fixed IP & domain name] Internal Memory: 1MB Accessories * GPS Antenna * GSM Antenna, * USB Cable * Power Connector * Microphone Connector * I/O Connectors (vehicle installation type)
~ select model Model Selection GS902B GS902P GS902S Enclosure Aluminum Aluminum Aluminum Low Voltage Alert Power Input: DC 9~24V Alarm Input 4 3 4 Panic Button 1 1 1 Pulse Input 0 1 0 Relay Output 2 2 2 High Precision AD Channels 2 2 1 Internal Memory 1MB 1MB 1MB Temperature Sensors 1 x Submersible [ 55~125 C] Data Capturing Interval Data Logging Interval Data Upload Interval IP Connection Protocol Data Transmission Data Upload PC Communication Port Internal Data Record Local Setup via USB by PC Software Remote Configuration via SMS or GPRS GPS Chip GPS Standard Built in Quad Band GSM Module Bundled Software Free Setup Software Centre Software UPD Testing Tool Optional Software 2 seconds Programmable (1 ~ 60 minutes) Programmable (5 seconds ~ 24 hours) Dynamic / Fixed TCP GSM SMS / GPRS Data / USB On Schedule / Manual Request / Alarm Triggered / GPS Alarm USB Average 30 days (1MB) ü ü GSTAR GS 89 +NMEA protocol Siemens MC55i GSM 850/900/1800/1900MHz Standard Edition Remote (GSM Modem GS300) & Local (USBport) Support txt database, max. 99 data loggers available Basic or Premium Edition
~ schematics How to setup GS902? [1] Mobile Phone [2] Setup Software [3] Server Software Premium Edition How to receive data from GS902? [1] Server Software Premium Edition
~ software Premium Server Software Auto Data Recovery Function: When live data is lost owing to GSM network problem, Server will automatically retrieve the logged data from the data loggers once network resumes. Receiving data via Internet & SMS remotely and USB locally Display of live data and devices status in real time Maintaining the record database in xml files Maintaining the database of GPRS data loggers identities and properties Display status of server, data loggers and clients Interface for user development and application Alert user via TCP / Email / SMS Grouping of user/client/email/sms phone numbers Client software support Support of integrating with: Access / MySQL / SQL / Oracle Databases Client Software Data Logger Client software provides: Downloading data from Server Real time monitoring of a number of data loggers Alert users when temperature is too high/low Alert customers via email, SMS or TCP Historical data review
~ software Edition Centre Basic Premium [A] Server Software Receive Data via SMS Receive Data via GPRS Data Receive Data via USB Port Live Data Display Database txt Daily only Access Access / MySQL SQL / Oracle XML Data Export to Excel Remote Command via SMS Remote Command via Internet Schedule Command Auto Data Recovery Temperature & Humidity Alert [GS902S] Send Alarm Alert via TCP network Send Alarm Alert via email Send Alarm Alert via SMS Alert Users Grouping Alert Emails Grouping Client Software support Max. GPS Trackers simultaneous support 99 999 9999 GPS Trackers Management User Authentication & Management Network Client Authentication & Management Web Based Access support SDK for user development [B] Client Software N.A. N.A. Bundled Live Data Display Alarm Alert Graphic Display of Temperature & Humidity Temperature & Humidity Hi/Low Alert Historical Data Access [C] Bundled GSM Modem Centre Edition is bundled with GPS Tracker free. Basic & Premium Edition are sold separately.