solenoid coils, size 22 mm Solenoid coil with pin distance of 11 mm. Order number 23-SP-011-411 23-SP-011-412 23-SP-011-422 23-SP-011-426 23-SP-011-427 23-SP-012-431 23-SP-012-432 Standard voltage 12 V DC 24 V DC 24 V AC 115 V AC 230 V AC 12 V DC 24 V DC Power consumption 4.2 W 7/4 VA 2.2 W Degree of protection IP 65 according to EN 60529 with connected plugs and additional O-rings Temperature range Thermoplast Voltage tolerance ± 10 % 20 hc... + 50 hc Standard actuator 23-R-011 and 23-R-013 23-R-012 and 23-R-014 Other voltages on request. * Using the coil 23-SP-011-412 with the actuator 23-R-012 or 23-R-014 the voltage tolerance is ± 30 %. Humidity resistant coil (Pin distance 11 mm) Order number 23-SP-011-1-711 23-SP-011-1-712 23-SP-011-1-722 23-SP-011-1-726 23-SP-011-1-727 23-SP-012-1-732 Standard voltage 12 V DC 24 V DC 24 V AC 12 V DC 115 V AC 230 V AC 24 V DC Power consumption 4,6 W 4,8 W 8,9/7,3 VA 5,5 W 2,5 W Degree of protection IP 65 according to EN 60529 with connected plugs and additional O-rings 100 % Duroplast Temperatur range 20 hc... + 50 hc Voltage tolerance ± 10 % Solenoid coil, connection with M-12 sensor plug. Pins are inside the coil. LED and circuit protection are in cluded. Order number 23-SP-011-5-O12 23-SP-012-5-O32 Standard voltage 24 V DC Power consumption 4.8 W 2.5 W Degree of protection IP 65 according to EN 60529 with connected cable Duroplast Other voltages on request. 4.280 Subject to change
Plug socket connector, 11 mm pin distance Plug socket for solenoid coil 23-SP-011, 23-SP-012, 23-SP-011-1, 23-SP-012-1 28-ST-01 AIRTEC solenoid sockets (type 28-ST-01) are a standard feature of all solenoid valves equiped with coil type 23-SP-011, 23-SP-011-1, 23-SP-012 and 23-SP-012-1. Cable-l: 6 to 8 mm (0.24 to 0.31 in). Conductor size: max. 1.5 mm 2 (16 gauge). Degree of protection: IP 65 according to VDE 0470/ EN 60529 with additional O-ring. 4 Plug socket with LED 28-ST-04 + 28-ST-06 AIRTEC solenoid sockets type 28-ST-04 and 28-ST-06 have a green LED. 28-ST-06 has an additional integrated circuit to protect against voltage peaks. Available with 24 V DC or 230 V AC. Order number 28-ST-04-112 28-ST-04-127 28-ST-06-112 28-ST-06-127 Standard voltage 24 V DC 230 V AC 24 V AC/DC 230 V AC Protective circuit No Varistor 507K30 Varistor Status indicator LED green Pin distance 11 mm Plug socket with molded cable 28-ST-06-K3 In addition to the features of type 28-ST-06 AIRTEC solenoid socket type 28-ST-06-K3 has a cable molded into the housing. Length of cable: 3.0 m (9.0 ft). Other lengths on request. Cable size: 3 x 0.75 mm 2 (three 18-gauge). Protection = IP 65. Order number 28-ST-06-K3-112 28-ST-06-K3-127 Standard voltage 24 V AC/DC 230 V AC Protective circuit Yes Status indicator LED green Subject to change 4.281
Solenoid coil 23-M-20 (Contact distance 9,4 mm) Order number 23-M-20-411 23-M-20-412 Standard voltage 12 V DC 24 V DC Power consumption 2 W Degree of protection IP 65 according to EN 60529 with connected plug socket Plug socket 28-ST-02-2-07 (Contact distance 9,4 mm) Plug socket with M12 connection. LED and circuit protection are included. View X 1 = not connected 2 = not connected 3 = 0 Volt ( ) 4 = 24 Volt (+) 5 = Plug socket 28-ST-02-2-05 (Contact distance 9,4 mm) Plug socket with M8 connection. LED and circuit protection are included. View X 1 = not connected 3 = 0 Volt ( ) 4 = 24 Volt (+) 4.282 Subject to change
Plug socket 28-ST-02-01 (Pin distance 9.4 mm, 2 wire, PE, similar type C) AIRTEC solenoid sockets type 28-ST-02 are a standard feature of all solenoid valves series using coil type 23-M-20. Cable-l: max. 4 6 mm (0.16 0.24 in). Conductor size: max. is 0.75 mm 2 (8 gauge). Degree of protection: IP 65 according to VDE 0470/EN 60529 with M12 gland nut + NBR gasket to the coil side. Useable for all available coil voltages. Temperature range: 40 hc... + 90 hc Plug socket 28-ST-09 and 28-ST-10 (Pin distance 9.4 mm, 2 wire, PE, similar type C) AIRTEC solenoid sockets type 28-ST-09 and 28-ST-10 have a green LED. 28-ST-10 has an additional integrated circuit to protect against voltage peaks. 4 Order number 28-ST-09-112 28-ST-09-127 28-ST-10-112 28-ST-10-127 Standard voltage 24 V AC/DC 230 V AC 24 V AC/DC 230 V AC Plug socket 28-ST-10-K3 (Contact distance 9.4 mm) Order number 28-ST-10-K3-112 28-ST-10-K3-127 Standard voltage 24 V AC/DC 230 V AC Coil 23-SP-016 In addition to the features of type 28-ST-10 AIRTEC solenoid socket type 28-ST-10-K3 has a cable molded into the housing. Length of cable: 3.0 m (9.0 ft). Other lengths on request. Cable size: 3 x 0.5 mm 2 (three 18-gauge). Degree of protection: IP 65 according to EN 60529. Please indicate requested voltage with order. Order number 23-SP-016-712 23-SP-016-726 23-SP-016-727 Standard voltage 24 V DC 115 V AC 230 V AC Power consumption 4.8 W 7.9/5.5 VA Degree of protection IP 65 according to EN 60529 with connected plug socket Plug socket 28-ST-03 (2 wire, PE, crumped pins, EN 175301-803 type A) The plug socket 28-ST-03 is a standard feature of all solenoid valves with coil 23-SP-016. Cable-l: 6 to 8 mm (0.24 to 0.31 in). Conductor size: max. 1.5 mm 2. Degree of protection: IP 65 according to VDE 0470/EN 60529 with PG9/M16 gland nut + NBR gasket to the coil side. Useable for all available coil voltages. Subject to change 4.283
serie BM-01 and BM-02 Solenoid coil 23-M-09-19 (Contact distance 8 mm) Solenoid pins at the same side as the manual override (HN). Solenoid pins at the opposite side as the manual override (HN). The connection patten of the pins is according to EN 175301-803 form C. 100 %. Order number Standard voltage Power consumption Manual override (HN) Position contact pins 23-M-09-19-461-T 23-M-09-19-431-T 23-M-09-19-461-R 23-M-09-19-431-R 23-M-09-19-462-T 23-M-09-19-432-T 23-M-09-19-462-R 23-M-09-19-432-R 23-M-09-19-452-T 23-M-09-19-422-T 23-M-09-19-452-R 23-M-09-19-422-R 23-M-09-19-456-T 23-M-09-19-426-T 23-M-09-19-456-R 23-M-09-19-426-R 23-M-09-19-457-T 23-M-09-19-427-T 23-M-09-19-457-R 23-M-09-19-427-R 12 V DC 1 W 24 V DC 1 W 24 V AC 3 VA 115 V AC 3 VA 230 V AC 3 VA Plug socket 28-ST-02-1 (Pin distance 8 mm) AIRTEC solenoid sockets with seal type 28-ST-02-1 are a standard feature of all solenoid valves series using coil type 23-M-09-19- Cable-l: max. 6.5 mm (0.26 in). Conductor size: max. is 0.75 mm 2 (8 gauge). Degree of protection: IP 65 according to VDE 0470/EN 60529. Useable for all available coil voltages. Plug socket 28-ST-09 and 28-ST-10 (Contact distance 8 mm) AIRTEC solenoid sockets type 28-ST-09-1 and 28-ST-10-1 have a green LED. 28-ST-10-1 has an additional integrated circuit to protect against voltage peaks. Order number 28-ST-09-1-112 28-ST-09-1-127 28-ST-10-1-112 28-ST-10-1-127 Standard voltage 24 V AC/DC 230 V AC 24 V AC/DC 230 V AC 4.284 Subject to change