7400 & 74 SERIES GRADE 1 ULTRALINE electric strikes Adams rite Electric Strikes for exit device, deadlatch or lockset A What is Preload? Pressure is exerted on a door and transferred to the electric strike keeper. This pressure prevents the strike from releasing because of the pressure binds the latch to the keeper. Even small amounts preload can cause the electric strike to malfunction or be disabled. Preload Causes Stack pressure caused by heating and air conditioning, misaligned strike and locksets, or warped or damaged metal and wood doors. These preloads can under some conditions leave a door unlocked making building assets vulnerable. Solution The Ultraline strikes are fully adjustable for door & frame related conditioning which allows for the correct functioning of the strike under preload conditions. Using jaw inserts of various sizes, the UltraLine 7400 Series electric strikes are adjustable to compensate for door and frame related preload and security problems. 74R1 74R2 Single solenoid operates on 12, 16 or 24 volt AC/DC power Over 2000 lbs of holding force Open electrically with 30 lbs of preload Compact size: 1-1/16 overall depth Field selectable - fail secure or fail safe Retrofits previous Adams Rite 7800, 7500, 7100 & 7000 series, 74R1 & 74R2 replace old 71R1 & 71R2 series Exceeds Grade 1 standards Adjustable jaw Low current draw UL listed burglary resistance 7400 74R1 130: for rim exit device 3/4 pullman rim For aluminum, wood, hollow metal jambs & rim exit device 74R2 130: for rim exit device 1/2 narrow rim Aluminum frame Mfg # Faceplate EZ # 74R1 130 1-3/4 x 9 x 11/16 Deep 090502 74R2 130 1-5/8 x 9 x 1/2 Deep 090503 Current Draw in Amps Volts AC DC 12.163.440 16.228.458* 24.084.230 * 16VDC Requires VA 7400-16VDC adapter available by special order. 7400: For deadlatch or lockset For aluminum jambs or stiles 7410: For deadlatch or lockset For aluminum, hollow metal & wood jambs and doors 7440: For deadlatch or lockset For hollow metal & wood jambs and doors Mfg # Faceplate Corners Latch EZ # 7400 628 1-1/4 x 4-7/8 Flat Radius 1/2 To 5/8 090505 7410 628 1-7/16 x 7-15/16" Flat Radius 1/2 To 5/8 090507 7440 628 1-1/4 x 4-7/8 Flat Square 1/2 To 5/8 090511 8
Faceplates for EC141 & EC171 Strikes EFF EFF Faceplate options, Electric Strikes for Exit Device & Economy Electric Strike ECR4 & ECR6 Radius corners, flat faceplate for use with centreline locksets in aluminum frames ECR7 Radius corners, flat faceplate for use with centreline locksets in wood or aluminum frames ECS4 Square corners, flat faceplates for use with centreline locksets in metal frames ECR4 ECR7 Mfg # Size Frame Corners EZ # ECR4 630 4-7/8 x 1-1/4 Aluminum Radius 079529 ECR6 630 6-7/8 x 1-1/4 Aluminum Radius 079532 ECR7 630 7-15/16 x 1-7/16 Aluminum/Wood Radius 079533 ECS4 630 4-7/8 x 1-1/4 Metal Square 079530 EC601 Strikes for Exit Devices E Designed for rim or surface mounted exit devices For wood, metal or aluminum jambs Accommodates all pullman type latches with a 1-1/2 to 3-1/4 throw Offer horizontal adjustment for proper alignment and optional double door housing for pairs of doors Strike depth 1-1/2 Fail secure only Continuous duty operation requires DC current Plug-in pigtail connectors included BHMA Grade 2 UL 1034 burglary resistant UL 10C 90 minute rating Faceplate: 9 x 1-3/4 x 3/4 Mfg # Voltage EZ # EC601 12A/D628C 12VAC/DC 079525 EC601 24A/D628C 24VAC/DC 079526 EC15B Economy Strike Ideal for light-duty applications with cylindrical locksets 1/2 up to 5/8 throw (5/8 requires 1/8 door gap) in metal, wood or aluminum jambs Offset and cylindrical locks Fail secure only Plug-in pigtail connectors included Faceplate: 5-7/8 x 1-1/4 Mfg # Voltage EZ # EC15B8 16A626 8-16VAC 079527 106
310-2 & 310-3-1 Electric strikes Folger Adam Grade 1 electric strikes 310 2 310 3 1 Industrial grade electric strikes for use with cylindrical locks, mortise locks and mortise exit devices Horizontally adjustable keeper to allow for door and frame misalignment Tamper resistant, heavy-duty construction of entirely stainless steel for strength and corrosion resistance Static strength 1,500 lbs, reversible Plug-in connector Current Draw:.51 amps @ 12VDC,.25 amps @ 24VDC continuous duty Note: These products will require relocation of the centre line when used with mortise locks. 310 2 For a 1/2 or 5/8 throw latchbolt (without deadbolt) on single and pairs of doors. 1/2 keeper standard 310 3 1 For a lockset with both a 3/4 throw latchbolt and a 1 throw deadbolt Deadbolt must be retracted manually Position of block within cavity is adjustable to properly locate auxiliary latchbolt for deadlocking purposes 1 keeper standard Mfg # Voltage Function EZ # 310 2 24D630 24VDC Fail Secure 026340 310 3 1 24D630 24VDC Fail Secure 085238 0760 0122 Replacement solenoid Mfg # Voltage EZ # 076 0122 002 12VDC 12VDC 028334 076 0122 003 24VDC 24VDC 026349 310-4 rim electric strike F Industrial grade electric strikes for use with rim exit devices For up to 3/4 pullman style latchbolts on single doors. 3/4 keeper depth Integrated shim for quick customization of faceplate thickness (3/4 to 1/2 ) Tamper resistant, heavy-duty construction construction of entirely of stainless steel for strength and corrosion resistance Static strength 1,500 lbs Integrated ramps to better accommodate deadlatches Set screws for horizontal lockdown In-frame horizontal adjustability Wider faceplate (1-3/4 ) for greater versatility Size: 9 x 1-3/4, reversible Fail secure (standard) Plug-in connector Current draw:.25 amps @ 24VDC continuous duty Mfg # EZ # 310 4 24D630 026343 115
HES 9400 & 9500 Series Electric strikes 9400 series slime-line Rim Exit Device Strikes The HES 9400 electric strike is completely surface-mounted with a unique 1/2 slim-line form that is ideal for 1/2 throw rim exit devices in steel, aluminum or wood frames A smooth new profile, the 9400 series features a cover that conceals the mounting screws and offers a sleek surface for superior looks and added strength For 1/2 throw rim exit devices Field selectable fail secure/fail safe Field selectable dual voltage 12VDC or 24VDC»».45 amps @ 12VDC continuous duty»».25 amps @ 24VDC continuous duty Accommodates up to 1/2 pullman latch For steel, aluminum & wood frame application Stainless steel construction UL1034, burglary resistant listed Exceeds ANSI/BHMA A156.31, Grade 1 standards ANSI A250.13-2003 windstorm listed 9400 630 Slim Line Electric Strike For Rim Exit Devices 102489 9500 Series Rim Exit Device Strikes With a new enhanced design, the 9500 series Genesis III continues to set the standard for fire-rated surface mounted electric strikes All components are completely encased within its 3/4 thick stainless steel housing-requiring no cuts to the jamb For rim exit devices Field selectable fail secure/fail safe Field selectable dual voltage 12VDC or 24VDC»».45 amps @ 12VDC continuous duty»».25 amps @ 24VDC continuous duty Accommodates up to 3/4 pullman latch For steel, aluminum & wood frame application Stainless steel construction UL 10C fire-rated, 3hr single door UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 ANSI A250.13-2003 windstorm listed h 9500 630 For Rim Exit Devices 081022 133
HES 9600 Series Rim Exit Device & Accessories 9600 Series Surface Mounted Rim Exit Device Strikes The 9600 series Genesis III continues to set the standard for surface mounted electric strikes Features an internally mounted solenoid and two stainless steel, independentlyoperating locking mechanisms All components encased in the 3/4 thick stainless steel housing, requiring no cuts to the jamb prior to installation For rim exit devices Field selectable fail secure/fail safe Field selectable dual voltage 12VDC or 24VDC»».45 Amps @ 12VDC continuous duty»».25 Amps @ 24VDC continuous duty Strike body depth: 3/4 Accommodates up to 3/4 pullman latch For steel, aluminum & wood frame application Stainless steel construction UL1034, burglary resistant listed ANSI/BHMA A156.31, Grade 1 ANSI A250.13-2003 windstorm listed 9600 630 Complete Surface Mounted Strike 072790 9600 630LBSM With Latchbolt Strike Monitor 085932 9600 108 1/8 Spacer Plate For 9600 Series 077041 Electrical Accessories & Latch guard H 150 2001M 2005M3 150 Strike Latch Guard Stainless steel Installed at the edge of the door to cover the lock and electric strike 626 finish only Compatible with:»» Folger Adam - 712, 712-75, 732, 732-75, 742-75»» HES - 1006, 4500, 5000, 5200, 7000 (791 & 792 options only), 7500 & 8000 (previously known as 5900 series) series 2001 Bridge Rectifier Easy-to-use plug-in bridge rectifier allows you the ability to convert your current from AC to DC 35V, 1 Amp 2005 Smart Pac III In-line power control able to receive input voltages from 12-32V AC or DC Built-in bridge rectifier provides 12 or 24VDC output Under continuous duty the output VDC is reduced by 25% to extend the life of the electric strike Includes in-line fuse, MOV and 2-8 second adjustable timer 2006m Plug-in Buzzer Audible operation indicator 2006m 150 Latch Guard For Electric Strikes 101623 2001M Plug-In Bridge Rectifier 004038 2005M3 Smart Pac III Controller 104851 2006M Plug-In Buzzer 004039 134
RCI 0161 rim & 0162 rim Electric Strikes 0161 Rim Electric Strike Accommodates various rim exit device with pullman latch projections (from 1/2 to 3/4 ) The 1-5/8 deep electrical insert may be horizontally adjusted after final installation to correct door misalignments without altering the original faceplate location AC or DC input acceptable to all models A minimum frame depth of 1-5/8 for surface-mounted installations Brushed stainless steel finish R 0161 0161DDH 0161 05 32D 12 Volt Strike 029226 0161 08 32D 24 Volt Strike 029287 0161DDH Double Door Housing 080383 0162 Surface Rim Electric Strike Surface mounted strike requires no frame cutting Field selectable voltage input 12 or 24VDC and 12 or 24VAC and even 11 to 16VAC Accommodates exit devices with latch projections from 1/2 to 3/4 Ensure proper latch alignment with horizontal adjustment up to 1/4 to compensate for door misalignments Compatible with most major exit devices Mounting spacer included to provide enhanced latch engagement Brushed stainless steel finish 0162 32D Electric Strike 100012 0162DDH Double Door Housing 100013 291
3000 Series Low Profile Strikes Trine Access Low Profile Strike, Thin Rim Exit Strike & Door Signal Kit t Often requires up to 70% less cutting of the frame face as compared to conventional electric strikes An electric strike with a 1 total backset for installation without the removal of most dust boxes. Holding force: 1200 lbs Life cycle: 500,000 Fail secure Stocked intermittent duty only All stainless steel locking mechanism Mfg # Finish Voltage EZ # Fits ANSI 115.3, 2-3/4, T Style 3234 12VDC26D Satin Chrome 12VDC 074387 3234 24VDC26D Satin Chrome 24VDC 074389 1/2 Thin Rim Exit Device Strike 1/2 profile is 1/4 thinner than standard surface mount rim exit device strikes for applications where the door to frame gap is minimal Voltage: Built in electronics allow the strike to operate with DC voltages between 11-30 volts Built-in surge and kick-back protection Patented anchoring system provides extra strength 1/8 steel spacer included when 5/8 profile is required Grade 1 all stainless steel construction Requires 500 ma pull-in & 178mA holding current @ 12VDC, 255mA pull-in & 84mA @ 24VDC Measures: 9 H x 3/4 W x 1/2 D Mfg # Finish EZ # 4850 32D Stainless Steel 100291 WIRELESS Entry/Exit Signal Kit 1 note, 2 note or 8 note melody chime, field selectable Wireless battery-operated door contact switch A-23 battery (included) Up to 100ft range - 128 selectable codes Receiver plugs into 120 VAC outlet Transmitter mounting hardware provided Adjustable volume control 74db (low) 82db (high) @ 3ft UL recognized, FCC-IC approved Mfg # EZ # 206 3 060432 336
Von Duprin 5100, 6100 & 6200 Electric Strikes 5100 Multi-Function Series Voltage: 12 or 24 VDC continuous duty Fail safe or fail secure, easily changed in less than thirty seconds Includes mounting tabs & neoprene filler plate 1300 lbs pounds of holding strength Keeper depth of 1 2 : Accommodates latches up to 5/8 throw Tested to over one million cycles Faceplates included: 4-7 8 ANSI round corner, 4-7 8 ANSI square corner, 7-15 16 long, round corner wood frame prep Adjustable keeper provides a snug fit and reduces pressure from the door on the strike Mfg # EZ # 5100 689 074901 6100 & 6200 Heavy Duty Strikes 1 5 /8" 1 /2" 15/8" 6" 2 3 /16" 4 1 /2" 7 /8" 1 3 /8" 13 /16" 6111 Minimum Clearance Stainless steel construction Accepts 3 4 throw latchbolt Fail secure Horizontally adjustable Plug connectors V 1 5 /8" 9" 3 /4" 2 9 /16" 1 5 /8" 7 9 /8" /16" 4 1 /2" Minimum Clearance 6111 For use with rim exit devices on single doors or double doors with mullion applications For hollow metal, aluminum or wood 6112 For use with rim exit devices on single door applications For hollow metal, aluminum or wood 6211 Electric strike for use with mortise locks without deadbolt or cylindrical locks on single door, hollow metal frames 6112 1 1 /4" 1 11 /16" 1 15 /32" 1 3 /8" 4 7 /8" 3 3 /8" 2 1 /6" 7 /8" 1 /2" 1 /8" 12" Minimum Clearance 6211 Mfg # For Voltage EZ # 6111 32D12VDC Rim Exit Devices 12VDC Fail Secure 062202 6111 32D24VDC Rim Exit Devices 24VDC Fail Secure 030163 6112 12VDC 630 Rim Exit Devices 12VDC Fail Secure 037252 6112 32D24VDC Rim Exit Devices 24VDC Fail Secure 030192 6211 32D24VDC Cylindrical Or Mortise 24VDC Fail Secure 030193 342