Adams Rite. Architectural Hardware. adamsrite.com 2014 PRICE LIST. Prices effective March 1, 2014

Transcription

1 Adams Rite Architectural Hardware 2014 PRICE LIST Prices effective March 1, 2014 adamsrite.com

2 4 LIMITED WARRANTY Limited Warranty Products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below. All mechanical products for five (5) years from date of manufacture Ultraline 7400 Electric Strikes for five (5) years from date of manufacture All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option SE option on exit devices: for optimal performance Adams Rite requires that all exit devices with the SE option be installed and powered using Adams Rite PS-SE power supplies. Failure to do so may cause permanent damage to the exit device and will void the manufacturer s warranty. When installed with PS-SE power supplies, SE exit devices are under warranty for three (3) years. GENERAL PROCEDURE Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, we will determine whether products qualify for repair or replacement under this warranty. If they do not, we will obtain authorization prior to proceeding. We have no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done. Adams Rite will not pay for the cost of repair performed other than in accordance with this warranty. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, S. 51st Street, Suite 102, or CustomerCare@assaabloyems.com and should include your name and address, the original PO number, an identification of the product or component part and a brief description of the defect. Upon receipt of such notice, Adams Rite will inform you where to ship such product or component part, and, in the event such examination reveals a defect covered by this warranty, Adams Rite will, at its option repair or replace the product. You are responsible for the cost of sending the product back to Adams Rite. Adams Rite will pay for the outbound replacement shipment. Merchandise ordered in error by the customer is subject to a minimum 35% restocking charge if returned within 90 days of receipt. Merchandise returned days from receipt is subject to a 50% restocking charge. Credit will not be allowed on items held for longer than 120 days. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance. CANCELLATION As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. The Adams Rite brand s proud history of customer service and manufacturing agility allow quick response times to customer s changing needs, which sometimes means special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite.

3 HOW TO ORDER 5 Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, sometimes these historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Glossary of Terms Backset: The horizontal dimension from the front of the faceplate to the center of the cylinder. Cam: The part on the back of a cylinder that rotates when the key is turned, and operates the lock mechanism. Deadbolt: A lockbolt having no spring action. Usually rectangular and actuated by cylinder or thumbturn. Deadlatch: A lock with a radiused or bevelled spring-loaded latchbolt which may be automatically or manually locked against unauthorized retraction and will self latch when the door returns to the closed position. Dogging: The means of retaining the lockbolt or exit device mechanism in the open position to allow the door to be free swinging. Escutcheon: An ornamental or protective plate that is fixed to the stile of the door and slips over the cylinder, thumbturn, handle or similar. Exit Device: A horizontal bar running at least two-thirds of the width of the door leaf, where pressure on the bar releases the locking arrangement. Keyed Alike (KA): All cylinders may be operated by the same key. Keyed Different (KD): Different keys operate each cylinder or group of cylinders. Latchbolt: A bevelled or radius bolt which operates on a spring return so that the lock may self-lock. Schoolhouse Function: The inside operation of the deadlock is limited to unlocking only. The lock is modified to prevent someone (like a student) from locking up the classroom, usually with a thumbturn, from the inside. Solenoid: A device that when energized with electrical current, develops a magnetic pull motion enabling mechanical work to be effected (such as plunger movement that releases the blocking arm on electric strikes).

4 6 TABLE OF CONTENTS General Information Adams Rite Limited Warranty/Terms and Conditions 4-5 Glossary of Terms 5 Table of Contents 6-7 PIVOTS B1921, B1923 Reinforcing Pivots 16 Products DEADLOCKS RT1050D RITE Touch Digital Glass Door Lock Bottom Rail Deadlock(Swingbolt) 8 MS1837 Series MS Two-Point Deadlock 8 MS1847 Series MS Deadlock 8 MS1850S Series MS Deadlock 9 MS1850S-050 Series MS Deadlock 9 MS1850SN Series MS Deadlock (ANSI Size) 9 MS1850SN-050 Series MS Deadlock (ANSI Size) 9 MS1861 Series MS Bottom Rail Deadlock Two-Point Deadlock 10 MS+1890 Series MS Deadlock/Deadlacth 10 MS1950 Series MS Deadlock 10 MS Series MS Deadlock Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors Heavy Duty Deadbolt Series Short Throw Deadbolt (Projection Style) , 4190 Flush Locksets (Including Deadlock) , 4431 Flush Locksets (Including Deadlock) Wood Door Deadbolt 12 EXIT DEVICES 8099 Dummy Pushbar , 8100 Surface Vertical Rod Exit Device Narrow Stile Surface Vertical Rod Exit Device , 8300 Mortise Exit Device Narrow Stile Mortise Exit Device , 8500 Metal Door Concealed Vertical Rod Exit Device Narrow Stile Concealed Vertical Rod Exit Device , 8700 Rim Exit Device Narrow Stile Rim Exit Device , 8900 Wood Door Concealed Vertical Rod Exit Device 19 OPTIONS FOR EXIT DEVICES 20 KITTED OPTIONS FOR EXIT DEVICES 20 MODIFICATION OPTIONS FOR EXIT DEVICES 20 ELECTRIC STRIKES 7100 Series Electric Strikes Series Electric Strikes Components Series Fire-Rated Electric Strikes Series Electric Strikes Series Electric Strikes Components TRIM DEADLATCHES 4300 Electrified Deadlatch (elatch) Steel Hawk RITE Pack Standard Duty Deadlatch Standard Duty Deadlatch Heavy Duty Deadlatch AN Heavy Duty Deadlatch (ANSI Size) 14 FLUSHBOLTS 1870 Cylinder-Operated Flushbolt HM Cylinder-Operated Flushbolt Cylinder-Operated Flushbolt 15 MS1880, MS1881 Two-Point Flushbolts 15 MS2180 Auto-Release Two-Point Flushbolt Two-Point Deadlatch with Paddle Series Turns Fixed Pull Series Entry Trim Keyless Entry eforce A H Keyless Entry and Aperio Hub Wholesale Kit Turn MS Deadlock Lever , 4565 Series Deadlatch Handles for 4300, 4500, , Series Deadlatch Handles for MS , 4569 Eurostyle Deadlatch Handles , Series Deadlatch Handles for MS Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Deadlatch Paddle for 4300, 4500, X Deadlatch Paddle for MS+1890, Heavy Duty Designer Deadlatch Handle 29

5 TABLE OF CONTENTS 7 CYLINDERS 4024, 4025, 4029 Cylinder Pulls Mortise Cylinder 30 MS4043 Cylinder Guard Thumbturn Cylinder Cam Disc Universal Cam Disc Cylinder Escutcheon Kit Rim Cylinder 31 ACCESSORIES 2190 Dual Force Interconnected Deadbolt/Deadlatch Strikes Dual Force Interconnected Deadbolt/Deadlatch Strikes Series MS Deadlock Strikes Two-Point Conversion Kit Threshold Bolt Header Bolt Header Bolt (Pairs of Doors Only) Exit Indicator Mounting Bridges , MS 4804 Series Strikes 33 Deadlatch Strikes Universal Mounting Tab Kits for Installing MS Locks & Latches 34 MS1880, MS1881 Two-Point Flushbolts 34 THICK DOOR KITS 2190, 2290 Dual Force Interconnected Deadbolt/Deadlatch Thick Door Kit , 4569 Eurostyle Deadlatch Handles Thick Door Kits , Eurostyle Deadlatch Handles Thick Door Kits 34 FACEPLATES MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates 35 MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates 35 MS1850S Deadlocks Faceplates 35 MS1850SN Deadlocks (Long Throw) Faceplates 35 MS1850SN Deadlocks (Hookbolt) Faceplates Flushbolt Faceplates 36 MS+1890 Deadlock Faceplates Heavy Duty Deadbolt Faceplates Fire-Rated Mortise Exit Device Faceplates Short Throw Deadbolt Faceplates Standard Duty Deadlatch Faceplates Standard Duty Deadlatch Faceplates Heavy Duty Deadlatch Faceplates Heavy Duty Deadlatch Special Faceplates , 8300 Faceplates , 7160 Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates Electric Strikes Faceplates , 7170 Electric Strikes Faceplates 38 POWER 4612 Power Transfer Device 39 PS-1 Power Supply 39 PS-LR Power Supply 39 PS-SE Power Supply , 4605, 4606 Transformer/Rectifier/Plezo Horn 39

6 8 DEADLOCKS DEADLOCKS How to Order DEADLOCKS Below is an example of how to order an Adams Rite deadlock. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. MS1850S Series MS Deadlock MS185 0S FACEPLATE BACKSET HANDING FINISH Faceplate shape requirements will vary based upon application. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify handing of door. Specify finish. Please refer to catalog for complete finish offering. RT1050D RITE Touch Digital Glass Door Lock RT1050D Digital glass door lock for single or double doors RT-RCM1050 Remote control module RT-5C-1050 Extra cards (package of 5 cards) $ $ $ Bottom Rail Deadlock (Swingbolt) sw 1830 MODEL /32", or 1-1/8" backset $ MS1837 Series MS Two-Point Deadlock & FINISHES MS1837 Includes strike, 36" cylinder height MS1837 Includes strike, cylinder height other than 36" 313, 335, , 626 $ $ $ $ MS1847 Series MS Deadlock MODEL & FINISH 630 MS1847 Deadlock, stainless steel $54.00

7 DEADLOCKS 9 MS1850S MS1850S-050 Series MS Deadlock & BACKSETS 7/8" 31/32" 1-1/8" 1-1/2" MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike Series MS Deadlock $76.00 $64.00 $64.00 $64.00 $76.00 $64.00 $64.00 $64.00 $78.00 $66.00 $66.00 $66.00 $76.00 $64.00 $64.00 $64.00 Schoolhouse function for above locks add $36 & BACKSETS 7/8" 31/32" 1-1/8" 1-1/2" MS1850S-X50 Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851S-X50 Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SW-X50 Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike MS1852S-X50 Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $76.00 $64.00 $64.00 $64.00 $76.00 $64.00 $64.00 $64.00 $78.00 $66.00 $66.00 $66.00 $76.00 $64.00 $64.00 $64.00 MS1850SN MS1850SN-050 Series MS Deadlock (ANSI Size) MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike Series MS Deadlock (ANSI Size) MS1850SN-450 Flat faceplate, any handing, 313, 335, or 628 finish, without strike MS1851SN-450 Radius faceplate, any handing, 313, 335, or 628 finish, without strike MS1852SN-450 Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $91.00 $91.00 $91.00 Schoolhouse function for above locks add $36 $91.00 $91.00 $91.00 MS1861 sw ms 1861 Series MS Bottom Rail Deadlock & FINISH 603 MS One-point deadlock, vertical bolt operation only $ MS Two-point deadlock, horizontal and vertical operation $166.00

8 10 DEADLOCKS 1875 Two Point Deadlock MODEL & FINISH Two-point deadlock $ MS+1890 MS1950 Series MS Deadlock/Deadlatch & FINISHES MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset MODEL MS+1893-IB Without faceplate and strike Series MS Deadlock $ $ $ $ $ $ $ $ $ $ $ $ $ MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ Schoolhouse function for above locks add $36 MS Series MS Deadlock MS1950-X50 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1951-X50 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1951W-X50 Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset MS1952-X50 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $ $ $ $118.00

9 CYLINDER C L 8.120R /16 CYLINDER C L /32 1/8R CAM TOLERANCE: +_.005 +_ CAM TOLERANCE: 3/16 25/ INCHES MILLIMETERS Nominal, subject to tolerance extremes HOW BACKSET IS MEASURED CYLINDER C L FLAT RADIUS BEVEL INCHES Nominal, subject to tolerance extremes. 1 5/8 1/2 2-5/ / /32 3/4 11/ /32 C L C L C L BACKSET 1-1/ / A ARMORED FACEPLATE 1 x6-7/8 FLAT (INCLUDED) RADIUS (INCLUDED) RADIUS w/weatherstrip PART# BACKSET "A" "B" 3-3/16 1-1/8" 1-1/8 1-3/4 1-1/2" 1-1/2 2-1/8 HOW BACKSET IS MEASURED CYLINDER C L FLAT BEVEL 1-1/4 X 8" C L C L FLAT (INCLUDED) FPK X-XXX CUTOUT TOLERANCE: MAXIMUM GAP DOOR TO JAMB: (3.1) CUTOUT TOLERANCE: MAXIMUM GAP DOOR TO JAMB: 1/8" C L OF LOCK AND STRIKE 4 7/8 4 1/8 1/8 3 3/8 1 1/4 BEVELED OR FLAT EDGE C L OF CYLINDER BACKSET 8 1-1/4 1/8 BACKSET /8 C L OF LOCK C L OF STRIKE PLATE 1-1/4 2-1/8 4-3/ DEADLOCKS Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors & TRIM SETS 2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) Cutout same as MS1850S 2190 Deadbolt plus holes for handle mounting Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, standard series handle designation (01, 02, 03) Stile Preparation For Clutched Exterior 2190 Trim Set Deadbolt/Deadlatch with flat or radius strike, Jamb Preparation designer series handle 2101 Strike designation (Covers and (MD previous cutout for MS Deadbolt) - Retrofits 4901 and 4501 strike preparations through MW) Cylinder Cam 2190 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with special MS cam dimensioned as shown. Cylinders with MS cams can be readily obtained from most cylinder manufacturers. See page SW-37 for cylinder make and trim information Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, designer series handle designation (MD through MW) EXTERIOR TRIM SET 10B, US32D US3, US4, US32 ELECTRIFIED EXTERIOR TRIM SET 10B, US32D US3, US4, US32 LOW PROFILE TRIM 10B, US32D US3, US4, US32 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Latch/Lock, Cylinder & Lever & FINISHES Installation , BOXED LOCK Less lever trim, with adjustable faceplate and choice of strike (Option 1 or 2) EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $ $ $ standard. Dark bronze/black strike to match selected faceplate finish 121, 119, add $ Dual Force Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors & TRIM SETS 2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03) 2290 "B" "A" Deadbolt/Deadlatch with flat/centerhung 4" or Stile Preparation For Clutched Exterior 4.5" strike, standard Trim Set series handle designation (01, 02, 03) ARMORED FACEPLATE 2290 Cylinder Deadbolt/Deadlatch Cam with Jamb flat or radius strike, 2290 Series locks are operable by any Preparation standard 1-5/32" diameter mortise cylinder 2206 Strike with special MS cam dimensioned as shown. Cylinders with MS cams can be readily obtained designer from most cylinder manufacturers. series handle designation (MD See page SW-37 for cylinder make and trim information. through MW) 2290 Deadbolt/Deadlatch with flat/centerhung 4" or 4.5" strike, designer series handle designation Latch/Lock, Cylinder & Lever Installation (MD through MW) EXTERIOR TRIM SET 10B, US32D US3, US4, US32 ELECTRIFIED EXTERIOR TRIM SET 10B, US32D US3, US4, US32 LOW PROFILE TRIM 10B, US32D US3, US4, US32 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ & FINISHES , 335 US32D 2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) US3, US4, US32 $ $ $ $ $ standard. Dark bronze/black strike to match selected faceplate finish 121, 119, add $7

10 12 DEADLOCKS 2331 Heavy Duty Deadbolt MODEL & FINISHES 605, Deadlock and strike $ $ Series Short Throw Deadbolt (Projection Style) & FINISHES 313, 335, Flat faceplate, 7/8", 31/32", or 1-1/8" backset 4071 Radius faceplate, 7/8", 31/32", or 1-1/8" backset 4072 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset MODEL 4073 Without faceplate 4189, 4190 Flush Locksets (Including Deadlock) $ $ $ $ & FINISHES 119, 121, 130 WHT 4189-IB Flush lockset, individually boxed $88.00 $ IB Flush lockset, individually boxed with cylinder $ $ IB Dummy flushset, individually boxed $58.00 $ , 4431 Flush Locksets (Including Deadlock) & FINISH BLACK 4430-IB ABS flush lockset, individually boxed $ IB ABS flush lockset with cylinder, individually boxed $ IB ABS dummy flushset, individually boxed $26.00 Kitted Options & FINISHES GRAY Grip pull for use with 4189, 4190 $ Grip pull for use with 4430, 4431 $ Wood Door Deadlock & FINISH Stainless steel deadlock $ Self-latching deadlock $53.00

11 DEADLATCHES 13 DEADLATCHES How to Order DEADLATCHES Below is an example of how to order an Adams Rite deadlatch. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately Heavy Duty Deadlatch FACEPLATE BACKSET HANDING STRIKE SIZE Faceplate shape requirements will vary based upon application. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify handing of door. Specify the size of the strike required. STRIKE SHAPE/LIP LENGTH Specify the shape of the strike required and lip length, where applicable. FACEPLATE FINISH Specify finish. Please refer to catalog for complete finish offering Electrified Deadlatch (elatch) Steel Hawk MODEL & FINISHES , /32", 1-1/8", or 1-1/2" backset 4300-M With monitoring "secure" indicator SPDT switch $ $ $ $ RITE Pack /32" backset, surface mount or mortise strike, 313 and 628 faceplates /8" backset, surface mount or mortise strike, 313 and 628 faceplates $ $ Standard Duty Deadlatch & FINISHES , Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $71.00 $ Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $71.00 $ W Radius faceplate with weatherstrip W, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $73.00 $ Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included MODEL 4513-IB Without faceplate, or strike $71.00 $77.00 $53.00

12 14 DEADLATCHES FLUSHBOLTS 4530 Standard Duty Deadlatch & FINISHES , Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4531 Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4532 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included 4900 Heavy Duty Deadlatch & FINISHES , Any handing, 31/32", 1-1/8", or 1-1/2" backset 4911W Any handing radius with weatherseal faceplate, 31/32", 1-1/8", or 1-1/2" backset MODEL 4913-IB Without faceplate or strike $88.00 $94.00 $88.00 $94.00 $88.00 $94.00 US4, US26D US3, US26 $99.00 $ $ $ $ $ $ $ $ AN Heavy Duty Deadlatch (ANSI Size) & FINISHES , AN Flat faceplate, 1-1/2 or 2-3/4 backset with 4506 strike MODEL US4, US26D US3, US26 $ $ $ $ AN-IB Without faceplate or strike $90.00 FLUSHBOLTS How to Order FLUSHBOLTS Below is an example of how to order an Adams Rite flushbolt. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately Cylinder-Operated Flushbolt FACEPLATE SHAPE BACKSET HANDING FINISH Faceplate shape requirements will vary based upon application. Specify handing of door. Specify the horizontal dimension from the front of the faceplate to the center of the cylinder. Specify finish. Please refer to catalog for complete finish offering.

13 sw ms 1880 FLUSHBOLTS Cylinder-Operated Flushbolt sw 1870 series & CYLINDER HEIGHT 1870 Flat faceplate, 313, 335, or 628 finish 1871 Radius faceplate, 313, 335, or 628 finish 1871W Radius faceplate with weatherstrip, 313, 335, or 628 finish 1872 Bevel faceplate, 313, 335, or 628 finish STANDARD CYLINDER HEIGHT CYLINDER HEIGHT OVER 12" (SPECIFY) $ $ $ $ $ $ $ $ HM Cylinder-Operated Flushbolt MODEL & FINISHES 313, 335, HM For hollow metal, 1-1/4" backset $ Cylinder-Operated Flushbolt & FINISHES 628, , /4" backset, 13-1/2" cylinder height /4" backset, cylinder height other than 13-1/2" $ $ $ $ MS1880, MS1881 Two-Point Flushbolts MS1880 Hourglass shaped turn, 119, 121, or 682 finish MS1881 Teardrop shaped turn, 119, 121, or 682 finish $ $ MS2180 Auto-Release Two-Point Flushbolt MS2180 7, 8, 9, 10 door height, 119, 121, or 130 finishes MK2180 Monitoring kit, lock status SPDT switch $ $50.00

14 16 FLUSHBOLTS PIVOTS EXIT DEVICES 4781 Two-Point Deadlatch MODEL & FINISHES 313, 335, 628 US26D US3, US Paddle, includes dogging feature $ $ $ PIVOTS B1921, B1923 Reinforcing Pivots & FINISH US2G B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $76.00 B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $63.00 EXIT DEVICES How to Order EXIT DEVICES Below is an example of how to order an Adams Rite deadlatch. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately Rim Exit Device SE M2 36 -US32D MEC MODEL Specify the model number. PUSHBAR FINISH Specify the pushbar finish. Please refer to catalog for complete finish offering. DEVICE OPTIONS Exit devices come with a variety of options, including electrification options. Please refer to catalog for complete offering. MONITORING OPTION Specify if request to exit (monitor/ signal) switches are required. DOOR OPENING WIDTH Specify door opening width. For pairs of doors, specify HALF of the total exit opening. US FINISH Specify US finish, if required. Please refer to catalog for complete finish offering. END CAPS OPTION Specify matching end caps, if required.

15 EXIT DEVICES Dummy Pushbar & FINISHES 313, 335, 628 US4, US32D US3, US Dummy pushbar without mechanism, for doors NOT requiring an exit device 8099M Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar. 8099M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar. 3100, 8100 Surface Vertical Rod Exit Device $ $ $ $ $ $ $ $ $ & FINISHES 313, 335, 628 US4, US32D US3, US Surface vertical rod for wood and hollow metal doors 8100T Top rod only 3100 Fire-rated surface vertical rod 3100T Top rod only for metal doors 3100W Top rod only for wood doors 8200 Narrow Stile Surface Vertical Rod Exit Device $ $1, $1, $ $ $1, $1, $1, $1, $ $1, $1, $ $1, $1, & FINISHES 313, 335, 628 US4, US32D US3, US Narrow stile surface vertical rod exit device 8200T Top rod only $ $1, $1, $ $ $1, Kitted Options & FINISHES 313, 335, 628 US4, US32D US3, US Tall door kit for doors up to 10' tall, for use with 8100, Tall door kit for doors up to 10' tall, for use with , 8300 Mortise Exit Device $ $ $ $ $ $ & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device $ $ $ Fire-rated mortise type $ $1, $1, , 8300 Mortise Exit Device Kitted Options continued next page

16 18 EXIT DEVICES 3300, 8300 Mortise Exit Device Kitted Options continued Kitted Options & FINISH 8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only Open back strike for 1-3/4" thick doors US32D $54.00 $ Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Mortise type exit device for single leaf $ $ $ Kitted Options Long face strike for covering MS strike prep Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door " thick door kit for use with 8300, /4" thick door kit for use with 8300, /2" thick door kit for use with 8300, /4" thick door kit for use with 8300, " thick door kit for use with 8300, Thermal door kit, 1/4" cladding, for use with Thermal door kit, 1/2" cladding, for use with 8400 $90.00 $68.00 $12.00 $14.00 $16.00 $19.00 $21.00 $72.00 $ , 8500 Metal Door Concealed Vertical Rod Exit Device & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device 8500T Top rod only 3600 Fire-rated concealed vertical rod 3600T Top rod only $ $ $ $ $ $ $1, $1, $1, $ $1, $1, Kitted Options MODEL 3655 Tall door kit for doors taller than 66" above bar height, up to 10' $49.00

17 EXIT DEVICES Narrow Stile Concealed Vertical Rod Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Concealed vertical rod exit device 8600T Top rod only Kitted Options MODEL 8655 Tall door kit for doors up to 10 for use with 8500, , 8700 Rim Exit Device $ $ $ $ $ $ $47.00 & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Fire-rated rim type $ $ $ Narrow Stile Rim Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US Rim type exit device $ $ $ Kitted Options Mullion for doors up to 8' for use with 8700, Mullion for doors up to 10' for use with 8700, Aluminum mullion for doors up to 8' for use with 8800, 313, or 628 finish Aluminum mullion for doors up to 10' for use with 8800, 313, or 628 finish 3900, 8900 Wood Door Concealed Vertical Rod Exit Device $ $ $ $ & FINISHES 313, 335, 628 US4, US32D US3, US Wood door concealed vertical rod exit device $ $ $1, Fire-rated wood door concealed vertical rod $1, $1, $1, Kitted Options MODEL Tall door kit for doors up to 10 for use with 8900 $49.00

18 20 EXIT DEVICES OPTIONS FOR EXIT DEVICES & FINISHES N/A US4, US32D US3, US32 SE Silent electrification motorized latch retraction EL Electric latch retraction for use with 3700, 8700, 8800 ELD Electric latch retraction with mechanical dogging for rim exit devices only LR Electric latch retraction ALARM Battery-operated alarmed exit device M1 Request to exit - monitor/single signal switch M2 Request to exit - monitor/double signal switch C Cylinder dogging ED Electric dogging MEC Matching end caps $ $ $ $ $ $ $ $46.00 $ $71.00 $89.00 Anti-microbial germ resistent coating available upon request. Add $51. KITTED ACCESSORIES FOR EXIT DEVICES & FINISHES N/A ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device, includes new pushbar, end caps and installation hardware Single signal switch kit, retrofits to 3000/ Double signal switch kit, retrofits to 3000/ MP Sex bolts, 2 per bag, 2 kits required per exit device $96.00 $ , 335, 628 US4, US32D US3, US32 $ $ $ US26D, US3 $12.00 MODIFICATION OPTIONS FOR EXIT DEVICES THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48" $53.00 $68.00

19 ELECTRIC STRIKES 21 ELECTRIC STRIKES How to Order ELECTRIC STRIKES Below is an example of how to order an Adams Rite electric strike. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order related products separately. 7100, 7101 Electric Strike FACEPLATE SHAPE Faceplate shape requirements will vary based upon application. VOLTAGE Specify voltage (12 or 24). CURRENT AND DUTY Specify current (AC or DC). FEATURES Features required (fail safe, fail secure, monitored) will vary based upon application. FINISH Specify finish. Please refer to catalog for complete finish offering. LIP EXTENSIONS (DIM. A) Specify dimension 'A' (door centerline to jamb edge) for lip extensions, if required 7100 Series Electric Strikes & FINISHES es For aluminum jambs 7101 For radius aluminum stiles 7110 For wood jambs 7111 For wood jambs, long faceplate 7130 For aluminum jambs, pre-cut for MS lock strike 7131 For radius aluminum stiles, pre-cut for MS lock strike 7140 ANSI size for hollow metal and wood jambs 7160 For aluminum jambs 7160-XX7 OR XX9 Monitoring signal switches 7170 For hollow metal and wood jambs 7170-XX7 OR XX9 Monitoring signal switches 313, 335, 628 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Lip extensions up to 3" for center-hung or non-flush doors add $ Series Electric Strike Components STRIKE BODY KITS 7103A For use with faceplate kits: FPK00, FPK01, FPK10, FPK11, FPK30, FPK31, FPK A For use with faceplate kits: FPK00, FPK11, FPK31 $ $ Series Electric Strike Components continued next page

20 22 ELECTRIC STRIKES 7100 Series Electric Strike Components continued FACEPLATE KITS & FINISHES FPK00 For use with body kits: 7103A, 7173A FPK01 For use with body kit: 7103A FPK10 For use with body kit: 7103A FPK11 For use with body kits: 7103A, 7173A FPK30 For use with body kit: 7103A FPK31 For use with body kits: 7103A, 7173A FPK40 For use with body kit: 7103A FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover 313,335, 628 US26D US3 652 $29.00 $49.00 $51.00 $29.00 $33.00 $33.00 $29.00 $49.00 $51.00 $32.00 $84.00 $61.00 $87.00 $64.00 KITTED OPTIONS through -13 Lip extension kits for use with 7100 through Lip extension kits for use with 7100 through 7140 interior framing systems through -13 Lip extension kits for use with 7160 and Lip extension kits for use with 7160 and 7170 interior framing systems $30.00 $30.00 $30.00 $ Series Fire-Rated Electric Strikes & FINISH Fire-rated, for cylindrical latches $ Lip extension for interior frame systems $ XX9 Monitoring signal switches $ Fire-rated, for mortise latches $ Lip extension for interior frame systems $ XX9 Monitoring signal switches $ Series Electric Strikes & FINISHES 7400 For radius jambs 7400-M Monitoring signal switches 7401 For radius aluminum stiles 7401-M Monitoring signal switches 313, 335, , , 612 $ $ $ $ $ $ $ $ $ $ , 121, 130 $ $ Series Electric Strikes continued next page

21 ELECTRIC STRIKES Series Electric Strikes continued & FINISHES 7410 For wood jambs, 7-15/16" faceplate 7410-M Monitoring signal switches 7411 For wood jambs, 10-1/4" faceplate 7411-M Monitoring signal switches 7430 For aluminum jambs, flat faceplate 7430-M Monitoring signal switches 7431 For aluminum stiles, radius faceplate 7431-M Monitoring signal switches 7440 For steel and wood, jambs and doors 7440-M Monitoring signal switches 74R1 For use with rim type exit devices with 3/4" latchbolt 74R1-M Monitoring signal switches 74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt 313, 335, 628 $ $ $ $ $ $ $ $ , , , 121, 130 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Series Electric Strike Components STRIKE BODY KITS 7400A Standard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK A Radius body, for use with faceplate kits: FPK7401, FPK7431 $ $ FACEPLATE KITS & FINISHES FPK7400 For use with body kit: 7400A FPK7401 For use with body kit: 7401A FPK7410 For use with body kit: 7400A FPK7411 For use with body kit: 7400A FPK7430 For use with body kit: 7400A FPK7431 For use with body kit: 7401A FPK7440 For use with body kit: 7400A FPK7445 For use with body kit:7400a 313, 335, , , 612 $22.00 $46.00 $46.00 $49.00 $58.00 $46.00 $73.00 $57.00 $83.00 $28.00 $22.00 $46.00 $46.00 $49.00 $58.00 $ , 121, 130 $22.00 $ Series Electric Strike Components continued next page

22 24 ELECTRIC STRIKES TRIM 7400 Series Electric Strike Components continued KITTED OPTIONS LEK Lip extension kits for use with 7400 series electric strikes VA VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation) ELX ElectroLynx Adapter to connect Adams Rite products to the ElectroLynx system $38.00 $17.00 $11.00 $27.00 TRIM How to Order TRIM Below is an example of how to order Adams Rite trim. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately Deadlatch Paddle 4591 M OPTIONS OPERATION DOOR THICKNESS FINISH Paddle option requirements (standard, with switch, active) will vary based upon application. Paddle operation (push or pull, to the left or right) will vary based upon application and compatible product. Select door thickness. Specify finish. Please refer to catalog for complete finish offering Series Turns & FINISHES 119, 121, OR -02 Turn for use with MS1847 deadlock OR -21 Turn and escutcheon for use with MS1847 deadlock 1004 Turn for use with 5015, 5017 deadlock 1015 Turn for use with 5015, 5017 deadlock 1016 Outside escutcheon $20.00 $23.00 $30.00 $27.00 $23.00

23 TRIM Fixed Pull & FINISH 3001 Tubular fixed pull US32D $ Flat fixed pull $ Series Entry Trim & FINISHES 3080 Entry trim with standard series lever (01, 02, 03) 3080-M Matching trim cover finish, plated 3080-U Universal trim kit includes tailpieces and trimplates for use with all Adams Rite exit devices 3080-MX Entry trim with designer series levers (MX) STANDARD TRIM US4, US32D, 10B US3, US32 ELECTRIFIED TRIM US4, US32D, 10B US3, US32 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ KITTED OPTIONS Adaptor kit for 3080 trim and G86 exit device $25.00 Anti-microbial germ resistent coating available upon request. Add $ Keyless Entry eforce -150 STANDARD UNIT PROX ICLASS & FINISHES 626, , , 121 For Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin Russwin ED4000 series and Sargent 8500 series rim exit devices only P C-01 $ $ $ For Adams Rite MS deadlocks P C-02 $ $ $ Kitted Options RSK-3090 Remote switch input connector 3090-CABLE 15 ft cable extension (ElectroLynx x pigtail) for 3090P/C 3090-CALBEL-EL 15 ft cable extension (ElectroLynx x ElectroLynx ) for 3090P/C $13.00 $28.00 $34.00

24 26 TRIM A H Keyless Entry and Aperio Hub Wholesale Kit FOR DEADLATCHES FOR DEADLOCKS & FINISHES A H-C Keyless entry paired with hub, iclass reader A H-P Keyless entry paired with hub, PROX reader $1, $1, $1, $1, $1, $1, $1, $1, Turn MODEL & FINISH Turn for 1875 deadlock, 1-1/2", 1-3/4", or 2" door thickness 4550 MS Deadlock Lever $54.00 MODEL & DOOR THICKNESS 1-3/4" TO 2-1/16" 2-1/16" TO 2-3/8" 4550 Deadlock lever, 119, 121, or 130 finish $ $ , 4565 Series Deadlatch Handles for 4300, 4500, 4900 & FINISHES 119, 121, X01 For door thickness (01) 1-3/4" to 2" 4560-X02 For door thickness (02) 2-1/4" to 2-1/2" 4560-X03 For door thickness (03) 2-3/4" to 3" 4560-X04 For door thickness (04) 3-1/4" 4565-X01 For door thickness (01) 1-3/4" to 2" 4565-X02 For door thickness (02) 2-1/4" to 2-1/2" 4565-X03 For door thickness (03) 2-3/4" to 3" 4565-X04 For door thickness (04) 3-1/4" $45.00 $65.00 $65.00 $65.00 $45.00 $65.00 $65.00 $ , Series Deadlatch Handles for MS+1890 & FINISHES 119, 121, For door thickness (11) 1-3/4" For door thickness (12) 1-3/4" to 2-1/4" For door thickness (13) 2-15/16" to 2-3/4" $35.00 $40.00 $ , Series Deadlatch Handles for MS+1890 continued next page

25 TRIM , Series Deadlatch Handles for MS+1890 continued & FINISHES 119, 121, For door thickness (11) 1-3/4" For door thickness (12) 1-3/4" to 2-1/4" 4568, 4569 Eurostyle Deadlatch Handles sw 4568 $35.00 $40.00 & FINISHES 119, 121, X01 For door thickness (01) 1-3/4" to 2" 4568-X02 For door thickness (02) 2-1/4" to 2-1/2" 4568-X03 For door thickness (03) 2-3/4" to 3" 4568-X04 For door thickness (04) 3-1/4" 4569-X01 For door thickness (01) 1-3/4" to 2" 4569-X02 For door thickness (02) 2-1/4" to 2-1/2" 4569-X03 For door thickness (03) 2-3/4" to 3" 4569-X04 For door thickness (04) 3-1/4" $57.00 $71.00 $71.00 $71.00 $64.00 $78.00 $78.00 $ , Series Deadlatch Handles for MS+1890 & FINISHES 119, 121, For door thickness (11) 1-3/4" to 1-15/16" For door thickness (12) 2" to 2-1/4" For door thickness (13) 2-15/16" to 2-3/4" For door thickness (14) 3" For door thickness (11) 1-3/4" to 1-15/16" For door thickness (12) 2" to 2-1/4" For door thickness (13) 2-15/16" to 2-3/4" For door thickness (14) 3" $44.00 $47.00 $47.00 $47.00 $51.00 $54.00 $54.00 $ Deadlatch Paddle for 4300, 4500, 4900 & FINISHES 313, 335, X-00 For door thickness (00) 1-3/4" X-01 For door thickness (01) 1-13/16" to 2" X-02 For door thickness (02) 2-1/4" to 2-1/2" X-03 For door thickness (03) 2-3/4" to 3" X-04 For door thickness (04) 3-1/4" $94.00 $ $ $ $114.00

26 28 TRIM X Deadlatch Paddle for MS+1890, 2190 & FINISHES 313, 335, X-00 For door thickness (00) 1-3/4" X-01 For door thickness (01) 1-3/4" to 2-1/4" X-02 For door thickness (02) 2-5/16" to 2-1/2" X-03 For door thickness (03) 2-9/16" to 2-3/4" 4591 Deadlatch Paddle for 4300, 4500, 4900 $81.00 $96.00 $96.00 $96.00 & FINISHES 313, 335, 628 US4, US26D US3, US X-00 For door thickness (00) 1-3/4" X-01 For door thickness (01) 1-13/16" to 2" X-02 For door thickness (02) 2-1/4" to 2-1/2" X-03 For door thickness (03) 2-3/4" to 3" X-04 For door thickness (04) 3-1/4" X Deadlatch Paddle for MS+1890, 2190 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ & FINISHES 313, 335, 628 US4, US26D US3, US X-00 For door thickness (00) 1-3/4" X-01 For door thickness (01) 1-3/4" to 2-1/4" X-02 For door thickness (02) 2-5/16" to 2-1/2" X-03 For door thickness (03) 2-9/16" to 2-3/4" 4591MA Active paddle, latch activator with monitor switch 4591M Paddle with switch, no latch activator Monitor switch kit for 4591, field installation $97.00 $ $ $ $ $ $ $ $ $ $ $ Add $ Add $91.00 $98.00

27 TRIM CYLINDERS Heavy Duty Designer Deadlatch Handles LEVER OPERATOR FOR 4300, 4500, 4900 SERIES DEADLATCHES & FINISHES US32D US10B 4600 With standard series handle designation (01, 02, 03) 4600-DESIGNER HANDLE With designer series handle designation (MD through MW) 4600-REX With request to exit form 'C' switch to indicate when lever is actuated 4600-THICK DOOR For door thickness greater than 1-7/8" US3, US4, US32 LEVER OPERATOR FOR 2190, 2290 INTERCONNECTED DEADBOLT/DEADLATCH US32D US10B US3, US4, US32 $ $ $ $96.00 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Anti-microbial germ resistent coating available upon request. Add $51. KITTED OPTIONS REX-4600 Request to exit kit DTK-4600 Fixed lever (dummy) kit TDK-4600-XX Thick door kit (specify door thickness for doors 2" to 2-7/8") TBK-4600-XX Through-bolt mounting kit for back-to-back mounting on wood doors (specify door thickness) $32.00 $9.00 $16.00 $22.00 CYLINDERS How to Order CYLINDERS Below is an example of how to order an Adams Rite cylinder. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately Thumbturn LOCK TYPE FINISH Lock type will vary based upon compatible product. Specify finish. Please refer to catalog for complete finish offering. 4024, 4025, 4026 Cylinder Pulls & FINISHES 119, 121, Cylinder pull, Schlage keyway Cylinder pull, Weiser keyway $52.00 $ , 4025, 4026 Cylinder Pulls continued next page

28 30 CYLINDERS 4024, 4025, 4026 Cylinder Pulls continued & FINISHES 119, 121, Special cylinder pull for Sargent Sixline, requires pull and cylinder modification Cylinder pull, Schlage keyway Standard cylinder pull, Weiser keyway , CYL X CYL Cylinder both sides pullset, Weiser keyway Special cylinder pull for Corbin 471AR, requires pull modification Special cylinder pull, for Russwin AR848, requires pull modification Cylinder pull for use with 5015, 5017 deadlock, Schlage keyway Cylinder pull for use with 5015, 5017 deadlock, Weiser keyway 4029 Special cylinder pull for Best 5A5A2, requires pull and cylinder modification Special cylinder pull for Medeco, requires pull and cylinder modification. Please furnish cylinder with purchase order. $ $57.00 $57.00 $ $ $ $60.00 $60.00 $ Mortise Cylinder & FINISHES 313, 335, keys and 1/4" ring, KD, KA2, KA50 only For 3300, 3600, 8300, 8400, 8600, or entry trim. Five pin. Can be installed directly in latch case of 8400, 8300, or $36.00 MS4043 Cylinder Guard MODEL & STILE WALL, CYLINDER MS4043 Cylinder guard, 119, 121, or 130 finishes 1/8" STILE WALL, 5 OR 6 PIN CYLINDER 1/4" STILE WALL, 5 OR 6 PIN CYLINDER 1/8" STILE WALL, 1-5/16" TO 1-7/16" LONG CYLINDER $32.00 $35.00 $ Thumbturn Cylinder MODEL & FINISHES 313, 335, Thumbturn cylinder with 1/4" ring $ Cam Disc X00, X01 Included with lever handles, door thickness less than 2" X02, X03 Included with lever handles, door thickness greater than 2" $14.00 $19.00

29 CYLINDERS ACCESSORIES Universal Cam Disc Universal cam disc, non-handed, for 1-3/4" door thickness (included in 4600) Universal cam disc, non-handed, for 2" door thickness Universal cam disc, non-handed, for 2-1/4" door thickness 8650 Cylinder Escutcheon Kit & FINISHES 8650 Cylinder escutcheon kit for 3600, 8500, 8600 exit devices 8650 For wall thickness over 1/8" 119, 121, , 335, 628 US4, US32D $21.00 $26.00 $26.00 US3, US32 $29.00 $54.00 $60.00 $71.00 $61.00 $86.00 $92.00 $ Rim Cylinder MODEL & FINISHES 313, 335, Rim cylinder for use with 3100, 3700, 8100, 8200, 8700, Five pin. $40.00 ACCESSORIES How to Order ACCESSORIES Below is an example of how to order Adams Rite accessories. Individual product ordering may vary from example below. Please refer to catalog for complete how to order guide. Order compatible products separately Header Bolt IB DIMENSION 'A' PACKAGING Specify dimension 'A' (door centerline to jamb edge). IB (individually boxed) Dual Force Interconnected Deadbolt/Deadlatch Strikes & FINISHES , Standard flat strike with dust box $24.00 $ XX Strike with extended lip, specify lip length dim. 'A' $38.00 $ Standard radius strike with dust box $24.00 $ Retrofit strike extended height 7-5/8" with dust box $34.00 $40.00 ARM /14