KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Data Sheet KTZ32.2-5 Total Head m Efficiency % Output kw C.W.L. C.W.L. = Continuous running water level Classification Electric submersible pump Protection class IP68 Depth of submersion max. 50m Open type impeller Max. solid handling 8,5mm Suitable for spring water, rain water, ground water, sand carrying water Electric Motor Dry-type submersible induction motor, Insulation class F, 2 poles, 2850 r.p.m. Direct on line start Voltage: 400V, 50Hz, 3-phase Power input: 3,kW Power output: 2,2kW Nominal current: 4,7A Start current: 34,0A Electric Cable 20m H07RN-F 4Cx,5mm 2 Motor Protection Circle thermal protector (snap-action bi-metal device) Shaft Seal Double mechanical seal in oil bath additional lubrication by oil lifting device Primary Seal: silicon carbide on silicon carbide Secondary Seal: silicon carbide on silicon carbide Bearings Shielded ball bearings, maintenance-free Materials Impeller: Casing: Suction Cover: Motor frame: Shaft: Chromium iron casting FC200 (EN-GJL-200) FCD500 (EN-GJS-500-7) FC50 (EN-GJL-50) SUS420J2 (EN-X30Cr3) Discharge Connection 3 (80mm) BS-Coupling (threaded flange) Weight 34 kg (dry weight of the pump without cable) 29.04.2003 Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Heltorfer Str. 6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429 KTZ32.2-5 Control No. KTZ-28-- 2.0.2006 ITEM CODE No. DESCRIPTION Q'TY SIZE MATERIAL WEIGHT kg REMARKS 40-074-5 Hex.Bolt 2 M0x20 SUS304 0.024 2 068-000-08 Handle KTZ2.5/32.2( w/shackle) SPC+NBR 3 00-26-7 Cable Clip Rubber HS2 NBR 0.002 4 00-05-0 Cable Clip SB SPC 0.0 5 40-08-37 Hex.Bolt M5x5 SWRM 6 4-003-58 Hex.Nut M5 SWRM 0.00 7 40-427-7 Hex.Bolt (w/plain Washer) 2 M5x5 SUS304 0.00 8 003-00-3 Gland LB 0.0 9 00-482-29 Cabtyre Cable Set 20m H07RN4Cx,5mm²(CEE) LBT(HAR) 9A 06-TEG-02 Cable Repair Kit 0 40-076-59 Hex.Bolt 4 M0x30 SUS40 0.029 42-28-24 Plain Washer 4 M0 SPC 0.00 2 032-6-2 Hose Coupling 80mm(5L) ADC 0.42 2 032-435-0 BS-Coupling (outside thread) 80mm FC 3 2-8-7 Packing KT-5 NBR 0.02 * 4 40-488-6 Hex.Bolt (w/spring Washer) 4 M8x30 SUS304 5 050-420-8 Motor Bracket FC 4,50 6 22-40-7 O-Ring G-45 NBR 0.00 * 7 053-477-9 Motor Protector 380-420V-50HZ 380-460 KA33-GQXL04 (T.C) 4,00 8 43-26-2 Pan Screw (w/spring Washer/Plain Was 2 M4x2 SWRM 0.00 9 009-292- Earth Terminal Set.25mmx40L 20 43-085-34 Pan Screw (w/spring Washer) M4x6 BSBM 0.00 2 42-389-2 Wave Washer #6204 SK-5 0.00 22 052-03-8 Bearing 6204ZZC3 0. 23 22-293-6 O-Ring 47xd3. NBR 0.002 * 24 06-74-8 Slinger d20xd27x2t SPC 25 058-000-0 Lead Wire Protection Plate d6xd36x2t Resin 26 055-706-6 Rotor Set 3,50 27 47-07- Impeller Key 5x5x20l SUS 28 056-00-9 Stator 380-420V-50HZ 380-460V-60HZ Set 29 052-08-3 Bearing 6305ZZC3 0.24 30 2-507-3 Packing (Water Way, Upp.) KTZ2.5/32.2 NBR 0.00 * 3 064-000-0 Motor Frame FC 9,00 32 40-488-6 Hex.Bolt (w/spring Washer) 4 M8x30 SUS304 33 2-246- Packing d0.3xd6x2t PE 0.00 * 34 035-000-0 Oil Plug M0x6L SUS304 0.02 34 035-25-3 Oil Plug (old version) M0x20(B=3) SUS304 0.02 old version 35 025-243-7 Mechanical Seal H-20T SiC+CCBN 0.09 Oil ISO VG32 740ml 36 43-070-23 Pan Screw 2 M5x6 SWRM 0.00 37 030-44-3 Oil Lifter H-20(A)(T) Resin 0.038 38 43-070-0 Pan Screw 4 M5x6 SWRM 0.00 39 030-54-6 Seal Stopper H-20T SPCC 0.059 40 22-39-3 O-Ring G-40 NBR 0.00 * 4 2-50-7 Packing (Water Way, Low.) KTZ2.5/22.2 NBR 0.002 * 42 020-00-0 Pump Casing KTZ2.5/32.2 FC 5,00 42 020-972-7 Pump Casing (old version) KTZ2.5/32.2 FC 5,00 old version 43 026-05-9 Oil Seal TC-253808 NBR 0.008 43 026-05-9 Oil Seal (old version) TC-25388 NBR 0.008 old version 44 07-34-3 Shaft Sleeve d20xd25x6l SUS304 0.025 45 040-04-25 Impeller Shim d8.2xd29x0.3t SUS304 0.00 46 02-556-27 Impeller (50Hz) KTZ32.2-5 HiCrFC 0.8 46 02-552-23 Impeller (60Hz) KTZ32.2-6 HiCrFC,0 47 047-3-28 Impeller Thread Protect.Cover No.3A(3.5) SUS304 0.04 48 42-65-0 Spring Washer M2 SUS304 0.00 49 4-032-4 Hex.Cap Nut M2 SUS304 0.02 50 20-0-2 Packing (S.Cover) d50xd86x0.3t PE 0.004 5 022-000-53 Suction Cover KTZ3.5/32.2 FCD,20 5 022-749-9 Suction Cover (old version) KTZ3.5/32.2 FCD,20 old version 52 42-27-23 Plain Washer 3 M8 SPC 0.00 53 44-492-5 Stud Bolt 3 M8x85(2/30) SUS40 0.039 54 023-472- Strainer Stand KTZ2.5/32.2 SPCC 0.88 55 42-27-23 Plain Washer 3 M8 SPC 0.00 56 4-005-89 Hex.Nut 3 M8 SWRM 0.00 <Packing O-Ring Set> 73-53-3 Packing O-Ring Set Set (*) page of
Exploded View KTZ32.2-5 25.04.2003 Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Dimensional Drawing KTZ32.2-5 C.W.L. CWL: Continuous Running Water Level 8..2004 Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Sectional Drawing KTZ32.2-5 No. 20 2 22 23 25 26 30 32 35 36 50 52A 52B Description Cabtyre Cable Pump Casing Impeller Suction Cover Strainer Stand Mechanical Seal Oil Seal Oil Lifter Hose Coupling Oil Plug Lubricant Motor Bracket Upper Bearing Lower Bearing Qty. Remarks H07RN-F FC200 (EN-GJL-200) Chromium Iron Casting HiCrFC FCD500 (EN-GJS-500-7) Steel Plate SPCC H-20T DD25388 Plastic Aluminium Alloy Casting ADC2 SUS304 (EN-X5CrNi8-0) Turbine Oil (ISO VG32) FC50 (EN-GJL-50) 6204ZZC3 6305ZZC3 No. 53 54 55 56 64 68 7 Description Motor Protector Shaft Rotor Stator complete Motor Frame Handle Shaft Sleeve Qty. Remarks SUS420J2 (EN-X30Cr3) FC50 (EN-GJL-50) Steel Plate SPCC + Rubber NBR SUS304 (EN-X5CrNi8-0) 28.04.2003 Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Pump Performance Curve KTZ32.2-5 Discharge Bore Total Head Capacity Motor Output Motor Input Phase Voltage Frequency Rated Current Starting Current Poles Revolution Starting Method Insulation Class 80 0 0,60 2,20 3,0 3 400 50 4,9 34 2 S.S. 2850 direct on line F mm m m 3 /min kw kw V Hz A A r.p.m. Total Head m Pump Eff. % Output kw 25.04.2003 Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429